From noreply at opencsw.org Fri Oct 1 10:15:06 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Oct 2010 10:15:06 +0200 Subject: [bug-notifications] [ap2_subversion 0004490]: Upgrading to 1.6.11, REV=2010.05.27 breaks webdav folders In-Reply-To: <5199f52ef74d140834dfbd01a174f95e> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4490 ====================================================================== Reported By: schwindt Assigned To: dam ====================================================================== Project: ap2_subversion Issue ID: 4490 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-07-15 21:26 CEST Last Modified: 2010-10-01 10:15 CEST ====================================================================== Summary: Upgrading to 1.6.11,REV=2010.05.27 breaks webdav folders Description: uploads no longer are possible. The main problem seems to be bdb48, as apr-util still uses bdb47 the DavLockDB is no longer useable/createable and as a result the uploads fail. ====================================================================== ---------------------------------------------------------------------- (0008308) dam (administrator) - 2010-10-01 10:15 https://www.opencsw.org/mantis/view.php?id=4490#c8308 ---------------------------------------------------------------------- Good thing. I'll wait with the release until you are ready. From noreply at opencsw.org Fri Oct 1 16:13:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Oct 2010 16:13:39 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-01 16:13 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== From noreply at opencsw.org Fri Oct 1 19:00:19 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Oct 2010 19:00:19 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <960d7ab9076a803872ba965b1a5b0ac3@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-01 19:00 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008309) phil (manager) - 2010-10-01 19:00 https://www.opencsw.org/mantis/view.php?id=4560#c8309 ---------------------------------------------------------------------- I'm afraid this does not sound like it could possibly be a bug in the package. It is most likely a bug in the way you have done your sparse zone setup. A side note: you did not mention which of your filesystems are "pkg-inherit-dir", or any other details of how you handle /opt/csw in your sparse zones. From noreply at opencsw.org Fri Oct 1 20:19:35 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Oct 2010 20:19:35 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <08b4dd44548dfd8f416b8e7437e8a314@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-01 20:19 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008310) holzi (reporter) - 2010-10-01 20:19 https://www.opencsw.org/mantis/view.php?id=4560#c8310 ---------------------------------------------------------------------- recreate instructions: pkgutil -i sudo zonecfg -z test create -t SUNWdefault set zonepath=/export/zones/test commit exit zoneadm -z test install zoneadm -z test boot zonelogin -C test pkgchk CSWalternatives From noreply at opencsw.org Fri Oct 1 20:29:06 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Oct 2010 20:29:06 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-01 20:29 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008311) phil (manager) - 2010-10-01 20:29 https://www.opencsw.org/mantis/view.php?id=4560#c8311 ---------------------------------------------------------------------- Your test output, and what you are complaining about, would appear to only partially overlap. your adding of the "sudo" package would seem to be irrelevant. The missing factor I'm seeing here, is whether CSWalternatives is properly installed in your global zone. please do, in the global zone: ls -l /opt/csw/sbin/alternatives pkgchk CSWalternatives pkgparam CSWalternatives VERSION From noreply at opencsw.org Fri Oct 1 21:48:40 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Oct 2010 21:48:40 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <1d60a9cc7300c98901d85e2688e8c641@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-01 21:48 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008312) holzi (reporter) - 2010-10-01 21:48 https://www.opencsw.org/mantis/view.php?id=4560#c8312 ---------------------------------------------------------------------- Yes it's only a partial overlap but I discoverd it that way. Since sudo has no symlinks in sparse zone. ls -l /opt/csw/sbin/alternatives -rwxr-xr-x 1 root bin 9757 May 17 18:05 /opt/csw/sbin/alternatives pkgchk CSWalternatives <-- exit 0 pkgparam CSWalternatives none / Europe/Berlin /sbin:/usr/sbin:/usr/bin:/usr/sadm/install/bin /usr/sadm/sysadm all CSWalternatives alternatives - an implementation of linux-style alternatives choice mgr 1.0,REV=2010.05.21 system http://www.opencsw.org written and packaged for CSW by Philip Brown phil at opencsw.org http://www.opencsw.org/bugtrack/ cswalternatives v1.0 CSWalternatives /var/sadm/pkg/CSWalternatives/save From noreply at opencsw.org Sat Oct 2 01:13:30 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 01:13:30 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-02 01:13 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008313) phil (manager) - 2010-10-02 01:13 https://www.opencsw.org/mantis/view.php?id=4560#c8313 ---------------------------------------------------------------------- This is really odd. It was a known problem that symlinks might behave oddly in sparse zones. But I had not previously seen that "regular" files were not properly copied. I have a hunch that if you had added the packages AFTER zone install, they would come out okay. but for some reason, solaris is not behaving properly on duplicating non-SUNW packages during "zoneadm install". However, reguardless, I should also mention that we only fully support /opt/csw in sparse zones, as type "inherit-pkg-dir". as mentioned in our recently updated page on sharing zones. For just this sort of reason. http://www.opencsw.org/use-it/sharing-optcsw I just tested things the way you suggested, and saw the problem. I then redid my steps, but this time defined /opt/csw as inherit-pkg-dir, and it worked fine. From noreply at opencsw.org Sat Oct 2 01:28:03 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 01:28:03 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <51a42a1d3654cb982f4c1e14e18c6446@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-02 01:28 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008314) phil (manager) - 2010-10-02 01:28 https://www.opencsw.org/mantis/view.php?id=4560#c8314 ---------------------------------------------------------------------- PS: I did some more testing: i tried WITHOUT inherit-pkg-dir, and noticed that the console of the zone was prompting me for some info. I entered the info, let it reboot, etc, etc... and THEN /opt/csw/sbin/alternatives appeared as a proper file in the zone. So you may have just been checking prematurely. But even given that, you should change your configuration of /opt/csw in the zone, to be inherit-pkg-dir, if you are going to be pkgadd'ing packages from the global zone. From noreply at opencsw.org Sat Oct 2 10:00:05 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 10:00:05 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <5332c32c31b1b70fdee0ddf1005e3100@www.opencsw.org> The following issue has been REOPENED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-02 10:00 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008315) holzi (reporter) - 2010-10-02 10:00 https://www.opencsw.org/mantis/view.php?id=4560#c8315 ---------------------------------------------------------------------- Just because you installed WITHOUT inherit-pkg-dir doesn't mean the bug is fixed. And closing the bug before I can confirm this is not the best way to deal with bugs. So I reopen the bug. I don't want to inherit /opt/csw as I want to install diffrend stuff in diffrend zones and don't want to have all that in the gobal zone either. For me thats a vaild use case. On a side node. I did a zlogin -C and did answer all the questions and rebooted and so on. From noreply at opencsw.org Sat Oct 2 15:19:00 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 15:19:00 +0200 Subject: [bug-notifications] [cswclassutils 0004558]: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected In-Reply-To: <054bd45ed83aeb0aa0541a9bbf41f4ab> Message-ID: <5dba0a3d6235e63ea3d91baaf7b5c346@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4558 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: cswclassutils Issue ID: 4558 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-30 15:18 CEST Last Modified: 2010-10-02 15:18 CEST ====================================================================== Summary: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected Description: Scipts fails with: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected found during apache 2 experimental test. http://buildfarm.opencsw.org/experimental.html#bwalton ====================================================================== From noreply at opencsw.org Sat Oct 2 15:20:43 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 15:20:43 +0200 Subject: [bug-notifications] [cswclassutils 0004558]: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected In-Reply-To: <054bd45ed83aeb0aa0541a9bbf41f4ab> Message-ID: <88766af769f0de10b2ac1dfba52d60b9@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4558 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: cswclassutils Issue ID: 4558 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-30 15:18 CEST Last Modified: 2010-10-02 15:20 CEST ====================================================================== Summary: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected Description: Scipts fails with: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected found during apache 2 experimental test. http://buildfarm.opencsw.org/experimental.html#bwalton ====================================================================== ---------------------------------------------------------------------- (0008316) bonivart (manager) - 2010-10-02 15:20 https://www.opencsw.org/mantis/view.php?id=4558#c8316 ---------------------------------------------------------------------- Seems to be missing the closing quote on line 91: echo "to their proper destinations . From noreply at opencsw.org Sat Oct 2 17:35:04 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 17:35:04 +0200 Subject: [bug-notifications] [cswclassutils 0004558]: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected In-Reply-To: <054bd45ed83aeb0aa0541a9bbf41f4ab> Message-ID: <2d42d5a0a773ae8cc665071e2127f455@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4558 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: cswclassutils Issue ID: 4558 Category: regular use Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-09-30 15:18 CEST Last Modified: 2010-10-02 17:35 CEST ====================================================================== Summary: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected Description: Scipts fails with: /usr/sadm/install/scripts/i.cswpreserveconf: syntax error at line 96: `end of file' unexpected found during apache 2 experimental test. http://buildfarm.opencsw.org/experimental.html#bwalton ====================================================================== ---------------------------------------------------------------------- (0008317) phil (developer) - 2010-10-02 17:35 https://www.opencsw.org/mantis/view.php?id=4558#c8317 ---------------------------------------------------------------------- fixed in subversion From noreply at opencsw.org Sat Oct 2 17:35:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 17:35:39 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-02 17:35 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== From noreply at opencsw.org Sat Oct 2 17:37:06 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 17:37:06 +0200 Subject: [bug-notifications] [xscreensaver 0003143]: Depend on CSWggettextrt In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3143 ====================================================================== Reported By: harpchad Assigned To: phil ====================================================================== Project: xscreensaver Issue ID: 3143 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 02:56 CET Last Modified: 2010-10-02 17:37 CEST ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0008318) phil (manager) - 2010-10-02 17:37 https://www.opencsw.org/mantis/view.php?id=3143#c8318 ---------------------------------------------------------------------- this was resolved in last release From noreply at opencsw.org Sat Oct 2 17:39:04 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 17:39:04 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <106087477934390c373b9610b0a46742@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-02 17:39 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008315) holzi (reporter) - 2010-10-02 10:00 https://www.opencsw.org/mantis/view.php?id=4560#c8315 ---------------------------------------------------------------------- Just because you installed WITHOUT inherit-pkg-dir doesn't mean the bug is fixed. And closing the bug before I can confirm this is not the best way to deal with bugs. So I reopen the bug. I don't want to inherit /opt/csw as I want to install diffrend stuff in diffrend zones and don't want to have all that in the gobal zone either. For me thats a vaild use case. On a side node. I did a zlogin -C and did answer all the questions and rebooted and so on. From noreply at opencsw.org Sat Oct 2 18:22:36 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 18:22:36 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-02 18:22 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008319) phil (manager) - 2010-10-02 18:22 https://www.opencsw.org/mantis/view.php?id=4559#c8319 ---------------------------------------------------------------------- Ah.. presuming you are reporting on an issue with TEST packages of apache2 (since the officially released versions of them do not use 'alternatives'), and since you had other issues with the 'alternatives' package due to your zone usage, I am going to close this bug, as probably invalid. (it is entirely possible it is an issue with the test apache packages rather than 'alternatives') If you discover a problem with officially released packages, please open a new bug, with details. Thanks, Philip From noreply at opencsw.org Sat Oct 2 18:25:13 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 18:25:13 +0200 Subject: [bug-notifications] [alternatives 0004538]: Symbolic links not created in new sparse-root zone In-Reply-To: <960a7844ae1b95d457c73e12363db4d1> Message-ID: <88d29f654f6e0dd654d88288f99982b7@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4538 ====================================================================== Reported By: gadavis Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4538 Category: regular use Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-08-31 22:19 CEST Last Modified: 2010-10-02 18:25 CEST ====================================================================== Summary: Symbolic links not created in new sparse-root zone Description: There appears to be a bug in the alternatives mechanism when creating a new sparse-root zone on Solaris 10 systems. I have a global zone with CSW alternatives, CSWneon, CSWsudo, and CSWsudo-common installed. The alternatives mechanism has registered the symlinks in the right locations and alternatives --display neon and alternatives --display sudo work as expected. If I then create a new non-global zone with the default inherited paths (your typical sparse-root zone), alternatives --display whatever shows the correct paths listed, but the symlinks are not there. After zone creation, I have to manually force the alternatives mechanism to install the needed symlinks by running a shell loop: for d in `ls /opt/csw/share/alternatives`; do alt=`basename $d`; alternatives --auto $alt; done Note that if I uninstall CSWsudo inside the zone and then re-install it, the alternatives mechanism works as expected. It's only upon initial zone creation that the alternatives symlinks do not get created. ====================================================================== ---------------------------------------------------------------------- (0008320) phil (manager) - 2010-10-02 18:25 https://www.opencsw.org/mantis/view.php?id=4538#c8320 ---------------------------------------------------------------------- Since I have proposed an official "workaround" (declare /opt/csw as inherit-pkg-dir) and since there was no further feedback, I'm closing this bug. From noreply at opencsw.org Sat Oct 2 18:25:43 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 18:25:43 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: <62365735dc3354729093ff6b0a00debe@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: closed Resolution: not fixable Fixed in Version: ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-02 18:25 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008321) bwalton (developer) - 2010-10-02 18:25 https://www.opencsw.org/mantis/view.php?id=4559#c8321 ---------------------------------------------------------------------- This bug is _most definitely NOT_ invalid. Notice that the path where alternatives looks for info is /etc/opt/etc/alternatives instead of /etc/opt/csw/altenatives. When that path correction is made, the alternatives command _still_ fails because nothing has created that directory. Then, when the directory is created, the alternatives command fails because something calls an internal function with the wrong number of arguments. This will be a showstopper for the pending apache2 refresh... Thanks -Ben From noreply at opencsw.org Sat Oct 2 18:28:06 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 18:28:06 +0200 Subject: [bug-notifications] [alternatives 0004425]: VER date is in the future In-Reply-To: Message-ID: <5dfe45103cda9cda64f7617ff44d5610@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4425 ====================================================================== Reported By: flod Assigned To: philadmin ====================================================================== Project: alternatives Issue ID: 4425 Category: packaging Reproducibility: always Severity: trivial Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-05-21 18:29 CEST Last Modified: 2010-10-02 18:28 CEST ====================================================================== Summary: VER date is in the future Description: At some point 1.0,REV=2010.05.01 was in the catalog. Then it was removed and 1.0,REV=2009.10.18 was in the catalog. (I thought the version date should not decrease.) Since today there is 1.0,REV=2010.10.18 . I am happy that there is a new version, but the date information in the version is in the future. ====================================================================== ---------------------------------------------------------------------- (0007943) philadmin (administrator) - 2010-05-21 18:43 https://www.opencsw.org/mantis/view.php?id=4425#c7943 ---------------------------------------------------------------------- sigh. thanks for catching that. new update coming. From noreply at opencsw.org Sat Oct 2 18:35:42 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 18:35:42 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <12941e05e2bbf1da3b346141b9337925@www.opencsw.org> The following issue has been REOPENED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-02 18:35 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008322) holzi (reporter) - 2010-10-02 18:35 https://www.opencsw.org/mantis/view.php?id=4560#c8322 ---------------------------------------------------------------------- Ok since you decline to even consider that this might be a bug since it looks like I run a configuration that is supported it should be put somewhere clear readable that using this kind of configuration is not supported. From noreply at opencsw.org Sat Oct 2 19:41:44 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 19:41:44 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <24ab6aea25802214988109858f5bf232@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-02 19:41 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008323) phil (manager) - 2010-10-02 19:41 https://www.opencsw.org/mantis/view.php?id=4560#c8323 ---------------------------------------------------------------------- It already is documented on our website. If you have a suggestion on a specific location where an additional reference would be appropriate, please let us know. As documented on the page I referenced above, your mixed use of pkgadd is a violation of basis consistency at the sysadmin level. If you are "inheriting packages from the global zone", then you should mark the relevant directories as "inherit-pkg-dir". That's what it's for. If you want to install packages locally for a directory... then great! Install packages locally only, for that directory in that zone. Just dont mix and match. Pick one strategy and be consistent about it, for that zone. Then these problems wont come up. I will also point out, that this is not a bug in "our" packages. This is an annoyance of how pkgadd works in Solaris, when you do global pkgadds. I'm not refusing to fix a bug in our package - I'm just informing you about how Solaris works. If you disagree with these statements, I welcome you to make a technical level comment on how specifically we can "fix" this issue. From noreply at opencsw.org Sat Oct 2 20:00:05 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 20:00:05 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: <43b240d0d00b3a716861335a30c79198@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: closed Resolution: not fixable Fixed in Version: ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-02 20:00 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008324) phil (manager) - 2010-10-02 20:00 https://www.opencsw.org/mantis/view.php?id=4559#c8324 ---------------------------------------------------------------------- woopsie.. yes I closed this prematurely. The good news is, I was coming back to mention that I noticed the error of my ways while coding other stuff, and this is also fixed in the release I'm making this weekend :) Please poke at the version in my "experimental" area. From noreply at opencsw.org Sat Oct 2 20:01:09 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 20:01:09 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: The following issue has been REOPENED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-02 20:01 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008324) phil (manager) - 2010-10-02 20:00 https://www.opencsw.org/mantis/view.php?id=4559#c8324 ---------------------------------------------------------------------- woopsie.. yes I closed this prematurely. The good news is, I was coming back to mention that I noticed the error of my ways while coding other stuff, and this is also fixed in the release I'm making this weekend :) Please poke at the version in my "experimental" area. From noreply at opencsw.org Sat Oct 2 20:03:54 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 20:03:54 +0200 Subject: [bug-notifications] [alternatives 0004556]: Major selection used by all packages does not work In-Reply-To: <5726e3969ec32419f294c61ea9df623d> Message-ID: <1391cb0a106af4dd4fc27b81e95013a1@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4556 ====================================================================== Reported By: dam Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4556 Category: regular use Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-28 11:16 CEST Last Modified: 2010-10-02 20:03 CEST ====================================================================== Summary: Major selection used by all packages does not work Description: The major selection option used by all of my packages like /opt/csw/sbin/alternatives --config mutt does not work in this implementation. It should display a menu and allow easy selection. ====================================================================== ---------------------------------------------------------------------- (0008325) phil (manager) - 2010-10-02 20:03 https://www.opencsw.org/mantis/view.php?id=4556#c8325 ---------------------------------------------------------------------- Okay. I've just made an updated version and dropped it in my experimental dir. please test. Please also note, that it isnt exactly PRETTY :-/ but "alternatives --config mutt" actually works,and I've tested it myself as such. So lemme know,and I'll push it out. From noreply at opencsw.org Sat Oct 2 20:04:28 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 20:04:28 +0200 Subject: [bug-notifications] [alternatives 0004556]: Major selection used by all packages does not work In-Reply-To: <5726e3969ec32419f294c61ea9df623d> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4556 ====================================================================== Reported By: dam Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4556 Category: regular use Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-28 11:16 CEST Last Modified: 2010-10-02 20:04 CEST ====================================================================== Summary: Major selection used by all packages does not work Description: The major selection option used by all of my packages like /opt/csw/sbin/alternatives --config mutt does not work in this implementation. It should display a menu and allow easy selection. ====================================================================== ---------------------------------------------------------------------- (0008326) phil (manager) - 2010-10-02 20:04 https://www.opencsw.org/mantis/view.php?id=4556#c8326 ---------------------------------------------------------------------- PS: as a random bonus, i also added a flag unique to CSW: --list From noreply at opencsw.org Sat Oct 2 23:38:49 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 23:38:49 +0200 Subject: [bug-notifications] [binutils 0003462]: provide 64bit binaries for binutils In-Reply-To: <853680935cf4d66023ca74e79e925709> Message-ID: <3dc0012224ef3e570fa1bc136074d536@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3462 ====================================================================== Reported By: mwatters Assigned To: phil ====================================================================== Project: binutils Issue ID: 3462 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: won't fix Fixed in Version: ====================================================================== Date Submitted: 2009-03-09 01:42 CET Last Modified: 2010-10-02 23:38 CEST ====================================================================== Summary: provide 64bit binaries for binutils Description: Please compile 64bit binaries for binutils ====================================================================== ---------------------------------------------------------------------- (0008327) phil (manager) - 2010-10-02 23:38 https://www.opencsw.org/mantis/view.php?id=3462#c8327 ---------------------------------------------------------------------- sorry, I dont feel like taking this hassle on myself. although I am about to bump the revision, hopefully. If you wish to have 64bit executables, then feel free to take over the package, mr. maintainer :) (Although I wouldnt think it should be neccessary at all) From noreply at opencsw.org Sat Oct 2 23:39:16 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Oct 2010 23:39:16 +0200 Subject: [bug-notifications] [binutils 0004457]: Please provide /opt/csw/gnu links In-Reply-To: <8a56d1b57efe824a51427b20de10e7f4> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4457 ====================================================================== Reported By: bwalton Assigned To: phil ====================================================================== Project: binutils Issue ID: 4457 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-06-17 03:16 CEST Last Modified: 2010-10-02 23:39 CEST ====================================================================== Summary: Please provide /opt/csw/gnu links Description: All packages providing g* binaries in /opt/csw/bin should now provide a symlink from /opt/csw/gnu/$bin_without_g_prefix to /opt/csw/bin/$bin_with_g_prefix (eg: /opt/csw/gnu/ls -> /opt/csw/bin/gls. Please update this package and let Ben know so he can drop the links from CSWgnulinks. ====================================================================== From noreply at opencsw.org Sun Oct 3 03:36:47 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 03:36:47 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 03:36 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008328) bwalton (developer) - 2010-10-03 03:36 https://www.opencsw.org/mantis/view.php?id=4559#c8328 ---------------------------------------------------------------------- Poked and failed. --snip-- [ verifying class ] Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... ERROR: set_link needs 3 arguments /opt/csw/sbin/alternatives[54]: shift: bad number Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.worker ... ERROR: set_link needs 3 arguments /opt/csw/sbin/alternatives[54]: shift: bad number --snip-- It's actually worse now, as before the registration worked, you just couldn't manually set the preferred link. :( From noreply at opencsw.org Sun Oct 3 04:06:07 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 04:06:07 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 04:06 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008329) bwalton (developer) - 2010-10-03 04:06 https://www.opencsw.org/mantis/view.php?id=4559#c8329 ---------------------------------------------------------------------- A further update: When the original bungled --set data was removed (by using --auto), a subsequent installation proceeded normally. So, the changes made earlier are likely good, but further error checks may be required in there somewhere? From noreply at opencsw.org Sun Oct 3 04:14:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 04:14:39 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: <03196a50efcacfd8f42ede7b2fdee41b@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 04:14 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008330) bwalton (developer) - 2010-10-03 04:14 https://www.opencsw.org/mantis/view.php?id=4559#c8330 ---------------------------------------------------------------------- Another update. It's still broken: # alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 # alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ERROR: set_link needs 3 arguments /opt/csw/sbin/alternatives[54]: shift: bad number This is the same error I noted earlier (found after fixing path and forcing directory creation). From noreply at opencsw.org Sun Oct 3 05:34:07 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 05:34:07 +0200 Subject: [bug-notifications] [wireshark 0004548]: Please Update Wireshark to latest stable release (currently 1.4.0) from Wireshark.org In-Reply-To: <047aedc6bd702739e7f43bca56af3e1b> Message-ID: <9f9c33c9b8dfef0961d3d80b12b7443c@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4548 ====================================================================== Reported By: alfyj Assigned To: hson ====================================================================== Project: wireshark Issue ID: 4548 Category: upgrade Reproducibility: N/A Severity: feature Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-09 22:01 CEST Last Modified: 2010-10-03 05:34 CEST ====================================================================== Summary: Please Update Wireshark to latest stable release (currently 1.4.0) from Wireshark.org Description: Current release 1.2.3 is at least 18 months old as a Solaris package, and probably additional months behind the Windows & OSX versions available at wireshark.org. My users are asking me to upgrade our server, which has monitor feeds from multiple routers in our lab. ====================================================================== ---------------------------------------------------------------------- (0008331) hson (manager) - 2010-10-03 05:34 https://www.opencsw.org/mantis/view.php?id=4548#c8331 ---------------------------------------------------------------------- I've built a 1.4.0, currently in experimental, please test it and let me know if it doesn't work as expected http://buildfarm.opencsw.org/experimental.html#hson From noreply at opencsw.org Sun Oct 3 08:16:31 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 08:16:31 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: <197bc08ff076a2efc25a63f0d72214e9@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 08:16 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008332) phil (manager) - 2010-10-03 08:16 https://www.opencsw.org/mantis/view.php?id=4559#c8332 ---------------------------------------------------------------------- "works for me"(with mutt). $ pfexec ./alternatives --set mutt /opt/csw/bin/mutt-ncurses phil at opensolaris:~$ echo $? 0 Given that apache2 is a NEW package, that was not using alternatives before, dont you think its possible the bug is in your implementation of the interface to the alternatives program, rather than in the alternatives program itself? From noreply at opencsw.org Sun Oct 3 08:22:50 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 08:22:50 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: <5b2b8786084c1e3c8d6208785121e37e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 08:22 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008333) phil (manager) - 2010-10-03 08:22 https://www.opencsw.org/mantis/view.php?id=4559#c8333 ---------------------------------------------------------------------- btw: you might try setting "DEBUG=echo" in your environment, and running it again, to see what set_link is getting called with. From noreply at opencsw.org Sun Oct 3 14:26:49 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 14:26:49 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 14:26 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008334) bwalton (developer) - 2010-10-03 14:26 https://www.opencsw.org/mantis/view.php?id=4559#c8334 ---------------------------------------------------------------------- I added an extra debugging line too to print the content of $line just before the set_link call. The altneratives stuff is pretty stock. I used the built in GAR support for this and have a file /opt/csw/share/altneratives/apache2 containing: # cat /opt/csw/share/alternatives/apache2 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 This is, afaik, a valid file. Both altnernatives are being shipped in the same package, so the altnatives file has 2 lines. Anyway, I still think alternatives is doing something wrong here...debug output: # DEBUG=echo alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker found match for httpd: /opt/csw/share/alternatives/apache2 set_alternative called with httpd line is: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 set_link called with: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork removing symlink /opt/csw/apache2/sbin/httpd linking /opt/csw/apache2/sbin/httpd to /opt/csw/apache2/sbin/httpd.prefork set_link called with: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker removing symlink /opt/csw/apache2/sbin/httpd linking /opt/csw/apache2/sbin/httpd to /opt/csw/apache2/sbin/httpd.worker set_link called with: 50 ERROR: set_link needs 3 arguments /opt/csw/sbin/alternatives[55]: shift: bad number From noreply at opencsw.org Sun Oct 3 17:07:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 17:07:39 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 17:07 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008335) phil (manager) - 2010-10-03 17:07 https://www.opencsw.org/mantis/view.php?id=4559#c8335 ---------------------------------------------------------------------- This is looking like a bug in your package. >From the output, I'm guessing you have the same line, in multiple "alternatives" files. This is incorrect configuration. Each file in /opt/csw/share/alternatives, must have unique content From noreply at opencsw.org Sun Oct 3 17:36:14 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 17:36:14 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 17:36 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008336) phil (manager) - 2010-10-03 17:36 https://www.opencsw.org/mantis/view.php?id=4559#c8336 ---------------------------------------------------------------------- Hmm.. on second thought, the joined output is not duplicate, so it cant be a "same line multiple times" problem. But I'm not seeing how the script itself could be joining lines otherwise. From noreply at opencsw.org Sun Oct 3 17:48:49 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 17:48:49 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: <8351313f150dbdbe58212d234fa3edc8@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 17:48 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008337) phil (manager) - 2010-10-03 17:48 https://www.opencsw.org/mantis/view.php?id=4559#c8337 ---------------------------------------------------------------------- awwright, I finally went and took your apache2 package, and grabbed the one alternatives config file. I see the same problem output you do. so I'm poking at it. From noreply at opencsw.org Sun Oct 3 18:04:02 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 18:04:02 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 18:04 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008338) phil (manager) - 2010-10-03 18:04 https://www.opencsw.org/mantis/view.php?id=4559#c8338 ---------------------------------------------------------------------- Okay, I've realized the issue now. my implementation presumes that, since the "alternatives" file format allows for "slave" addons to the end of the line, that each alternatives definition file, has exactly one line. That may or may not be a reasonable presumption to make. I havent decided. But you'll note that other stuff that we have, acts in that manner. there is /opt/csw/share/alternatives/mutt_ncurses /opt/csw/share/alternatives/mutt_slang It's unfortunate that we have lots of old legacy GAR support and documentation, that was left around from OTHER implementations of "alternatives", so that may have lead you astray here. A quick fix for you, Ben, would be for you to split up your two lines, into two files. I'm not sure how long it will take me to figure out multi-line-per-file support cleanly. From noreply at opencsw.org Sun Oct 3 18:45:24 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 18:45:24 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 18:45 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008339) phil (manager) - 2010-10-03 18:45 https://www.opencsw.org/mantis/view.php?id=4559#c8339 ---------------------------------------------------------------------- Yah, I've now spent some "quality time" with the code. It CAN handle multiple lines in the configs.. but only for DIFFERENT programs. If you put multiple entries for the same program, in the same file, it will be unhappy. From noreply at opencsw.org Sun Oct 3 23:02:23 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Oct 2010 23:02:23 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: <16e1a3bf602bae0f2e686ed8e331e86f@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-03 23:02 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008340) dam (administrator) - 2010-10-03 23:02 https://www.opencsw.org/mantis/view.php?id=4559#c8340 ---------------------------------------------------------------------- GAR currently writes at most one file per package to the location /opt/csw/share/alternatives/ I see no reason why there should be more than one file per package. Nonetheless multiple options per package is a valid usecase. From noreply at opencsw.org Mon Oct 4 00:37:24 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 00:37:24 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-04 00:37 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008341) phil (manager) - 2010-10-04 00:37 https://www.opencsw.org/mantis/view.php?id=4559#c8341 ---------------------------------------------------------------------- It is just a curent implementation detail of GAR, that it only writes one "alternatives" file per package. It could be modified to do otherwise. Similarly, the current alternatives implementation "could be modified" to do otherwise, but that would take a whole lot of thinking about design, and then quite a bit of coding, to make it happen. I'm guessing the GAR modification would be fairly easy. I will not have time to do further modification to the 'alternatives' program, for at least another two weeks. I find this whole thing rather odd to start with, having the two apache binaries merged into the top package. If you split off the different apache implementations into separate packages, (or at least the uncommon one) like we previously had, then this whole "problem" becomes moot. And it would add functionality to the user. there's no reason for them to download a binary (the lower-priority "alternative") and have it laying around, if they are never going to use it. From noreply at opencsw.org Mon Oct 4 02:11:40 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 02:11:40 +0200 Subject: [bug-notifications] [alternatives 0004538]: Symbolic links not created in new sparse-root zone In-Reply-To: <960a7844ae1b95d457c73e12363db4d1> Message-ID: The following issue has been REOPENED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4538 ====================================================================== Reported By: gadavis Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4538 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-08-31 22:19 CEST Last Modified: 2010-10-04 02:11 CEST ====================================================================== Summary: Symbolic links not created in new sparse-root zone Description: There appears to be a bug in the alternatives mechanism when creating a new sparse-root zone on Solaris 10 systems. I have a global zone with CSW alternatives, CSWneon, CSWsudo, and CSWsudo-common installed. The alternatives mechanism has registered the symlinks in the right locations and alternatives --display neon and alternatives --display sudo work as expected. If I then create a new non-global zone with the default inherited paths (your typical sparse-root zone), alternatives --display whatever shows the correct paths listed, but the symlinks are not there. After zone creation, I have to manually force the alternatives mechanism to install the needed symlinks by running a shell loop: for d in `ls /opt/csw/share/alternatives`; do alt=`basename $d`; alternatives --auto $alt; done Note that if I uninstall CSWsudo inside the zone and then re-install it, the alternatives mechanism works as expected. It's only upon initial zone creation that the alternatives symlinks do not get created. ====================================================================== ---------------------------------------------------------------------- (0008342) gadavis (developer) - 2010-10-04 02:11 https://www.opencsw.org/mantis/view.php?id=4538#c8342 ---------------------------------------------------------------------- Sorry, I've been knee-deep in systems migrations since this bug was filed. I cannot accept inherit-pkg-dir as a solution, as it does not work at all in an environment where the zones on a system are minimized to only have the necessary packages installed on them. There should be some way to trigger alternatives to do a fixup of it's symlinks without having to manually iterate through a directory listing. From noreply at opencsw.org Mon Oct 4 02:17:18 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 02:17:18 +0200 Subject: [bug-notifications] [alternatives 0004559]: --set does not work In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4559 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4559 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-30 15:47 CEST Last Modified: 2010-10-04 02:17 CEST ====================================================================== Summary: --set does not work Description: during testing the new apache2 package I wanted to change the alternative: /opt/csw/sbin/alternatives --display httpd Installed alternatives for httpd are: /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.prefork 100 /opt/csw/apache2/sbin/httpd httpd /opt/csw/apache2/sbin/httpd.worker 50 /opt/csw/sbin/alternatives --set httpd /opt/csw/apache2/sbin/httpd.worker ln: cannot create /etc/opt/etc/alternatives/httpd: No such file or directory ====================================================================== ---------------------------------------------------------------------- (0008343) bwalton (developer) - 2010-10-04 02:17 https://www.opencsw.org/mantis/view.php?id=4559#c8343 ---------------------------------------------------------------------- --snip-- It's unfortunate that we have lots of old legacy GAR support and documentation, that was left around from OTHER implementations of "alternatives", so that may have lead you astray here. --snip-- I'd actually say it's more unfortunate that the rewrite of alternatives doesn't handle what the original version did. :) I also agree with Dago here. Splitting the httpd.* files made sense previously as we had postinstall scripts that handled swapping things around. Given that this is the perfect use case for alternatives, there is no real need for a secondary package (aside from the issue James noted) at this point. I _can_ deliver httpd.worker in ap2_worker for now, but I'm still going to expect that you fix alternatives properly in the long run. From noreply at opencsw.org Mon Oct 4 11:49:17 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 11:49:17 +0200 Subject: [bug-notifications] [pngcrush 0004561]: Please upgrade to 1.7.12 Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4561 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: pngcrush Issue ID: 4561 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-04 11:49 CEST Last Modified: 2010-10-04 11:49 CEST ====================================================================== Summary: Please upgrade to 1.7.12 Description: Please upgrade to 1.7.12 as released by SFW today ====================================================================== From noreply at opencsw.org Mon Oct 4 11:52:00 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 11:52:00 +0200 Subject: [bug-notifications] [pngcrush 0004561]: Please upgrade to 1.7.12 In-Reply-To: <8031c447ee79fc6dfbfae431da06b6f2> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4561 ====================================================================== Reported By: dam Assigned To: james ====================================================================== Project: pngcrush Issue ID: 4561 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-04 11:49 CEST Last Modified: 2010-10-04 11:52 CEST ====================================================================== Summary: Please upgrade to 1.7.12 Description: Please upgrade to 1.7.12 as released by SFW today ====================================================================== From noreply at opencsw.org Mon Oct 4 11:53:58 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 11:53:58 +0200 Subject: [bug-notifications] [pngcrush 0004561]: Please upgrade to 1.7.12 In-Reply-To: <8031c447ee79fc6dfbfae431da06b6f2> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4561 ====================================================================== Reported By: dam Assigned To: james ====================================================================== Project: pngcrush Issue ID: 4561 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-04 11:49 CEST Last Modified: 2010-10-04 11:53 CEST ====================================================================== Summary: Please upgrade to 1.7.12 Description: Please upgrade to 1.7.12 as released by SFW today ====================================================================== ---------------------------------------------------------------------- (0008344) james (manager) - 2010-10-04 11:53 https://www.opencsw.org/mantis/view.php?id=4561#c8344 ---------------------------------------------------------------------- >From the change log: Change log: Version 1.7.13 (built with libpng-1.4.4beta05 and zlib-1.2.5) Version 1.7.12 (built with libpng-1.4.4beta05 and zlib-1.2.5) Version 1.7.11 (built with libpng-1.4.2 and zlib-1.2.5) Which pngcrush does not use: $ ldd -r /opt/csw/bin/pngcrush libm.so.1 => /usr/lib/libm.so.1 libpng12.so.0 => /opt/csw/lib/sparcv8plus+vis/libpng12.so.0 libz.so.1 => /opt/csw/lib/sparcv8plus+vis/libz.so.1 libc.so.1 => /usr/lib/libc.so.1 libdl.so.1 => /usr/lib/libdl.so.1 so no point in the update. From noreply at opencsw.org Mon Oct 4 12:03:37 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 12:03:37 +0200 Subject: [bug-notifications] [pngcrush 0004561]: Please upgrade to 1.7.12 In-Reply-To: <8031c447ee79fc6dfbfae431da06b6f2> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4561 ====================================================================== Reported By: dam Assigned To: james ====================================================================== Project: pngcrush Issue ID: 4561 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-04 11:49 CEST Last Modified: 2010-10-04 12:03 CEST ====================================================================== Summary: Please upgrade to 1.7.12 Description: Please upgrade to 1.7.12 as released by SFW today ====================================================================== ---------------------------------------------------------------------- (0008344) james (manager) - 2010-10-04 11:53 https://www.opencsw.org/mantis/view.php?id=4561#c8344 ---------------------------------------------------------------------- >From the change log: Change log: Version 1.7.13 (built with libpng-1.4.4beta05 and zlib-1.2.5) Version 1.7.12 (built with libpng-1.4.4beta05 and zlib-1.2.5) Version 1.7.11 (built with libpng-1.4.2 and zlib-1.2.5) Which pngcrush does not use: $ ldd -r /opt/csw/bin/pngcrush libm.so.1 => /usr/lib/libm.so.1 libpng12.so.0 => /opt/csw/lib/sparcv8plus+vis/libpng12.so.0 libz.so.1 => /opt/csw/lib/sparcv8plus+vis/libz.so.1 libc.so.1 => /usr/lib/libc.so.1 libdl.so.1 => /usr/lib/libdl.so.1 so no point in the update. From noreply at opencsw.org Mon Oct 4 12:04:40 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 12:04:40 +0200 Subject: [bug-notifications] [ant 0004293]: Upgrade to 1.8.0 In-Reply-To: <4f62d530ce8e0beb6fd12e698d393ae1> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4293 ====================================================================== Reported By: wbonnet Assigned To: james ====================================================================== Project: ant Issue ID: 4293 Category: upgrade Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-02-17 22:29 CET Last Modified: 2010-10-04 12:04 CEST ====================================================================== Summary: Upgrade to 1.8.0 Description: Please upgrade the package to version 1.8.0 ====================================================================== ---------------------------------------------------------------------- (0008345) james (manager) - 2010-10-04 12:04 https://www.opencsw.org/mantis/view.php?id=4293#c8345 ---------------------------------------------------------------------- 1.8.1 is released From noreply at opencsw.org Mon Oct 4 12:05:18 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 12:05:18 +0200 Subject: [bug-notifications] [bzip2 0004552]: Please upgrade to 1.0.6 In-Reply-To: <205d07e0633d8151953dadeb183f856a> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4552 ====================================================================== Reported By: dam Assigned To: james ====================================================================== Project: bzip2 Issue ID: 4552 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-20 17:52 CEST Last Modified: 2010-10-04 12:05 CEST ====================================================================== Summary: Please upgrade to 1.0.6 Description: Please upgrade to 1.0.6 due to the security fix released today ====================================================================== From noreply at opencsw.org Mon Oct 4 12:05:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 12:05:39 +0200 Subject: [bug-notifications] [bzip2 0004552]: Please upgrade to 1.0.6 In-Reply-To: <205d07e0633d8151953dadeb183f856a> Message-ID: <79b0e4b0bfc1f9f51ca0350cae211b38@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4552 ====================================================================== Reported By: dam Assigned To: james ====================================================================== Project: bzip2 Issue ID: 4552 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-09-20 17:52 CEST Last Modified: 2010-10-04 12:05 CEST ====================================================================== Summary: Please upgrade to 1.0.6 Description: Please upgrade to 1.0.6 due to the security fix released today ====================================================================== ---------------------------------------------------------------------- (0008346) james (manager) - 2010-10-04 12:05 https://www.opencsw.org/mantis/view.php?id=4552#c8346 ---------------------------------------------------------------------- 1.0.6 is released From noreply at opencsw.org Mon Oct 4 17:26:21 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 17:26:21 +0200 Subject: [bug-notifications] [pm_compressrawzlib 0004562]: Please rebuild without man pages Message-ID: <1f2c07f0bd0f5afc11981e248bc2a415@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4562 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_compressrawzlib Issue ID: 4562 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-04 17:26 CEST Last Modified: 2010-10-04 17:26 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.031 has been released. ====================================================================== From noreply at opencsw.org Mon Oct 4 17:27:08 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 17:27:08 +0200 Subject: [bug-notifications] [pm_compressrawzlib 0004563]: Please rebuild without man pages Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4563 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_compressrawzlib Issue ID: 4563 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-04 17:27 CEST Last Modified: 2010-10-04 17:27 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.030 has been released. ====================================================================== From noreply at opencsw.org Mon Oct 4 17:30:41 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 17:30:41 +0200 Subject: [bug-notifications] [pm_iocompress 0004564]: Please rebuild without man pages Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4564 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_iocompress Issue ID: 4564 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-04 17:30 CEST Last Modified: 2010-10-04 17:30 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.030 has been released. ====================================================================== From noreply at opencsw.org Mon Oct 4 18:48:11 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 18:48:11 +0200 Subject: [bug-notifications] [tetex 0004097]: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used In-Reply-To: <7ac39f56776882d59980bf4fa41591c6> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4097 ====================================================================== Reported By: adb Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 4097 Category: regular use Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-12-24 02:53 CET Last Modified: 2010-10-04 18:48 CEST ====================================================================== Summary: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used Description: On our multi-TB filesystems, the CSW LaTeX gives the error "can't find file". When the same file is moved to a smaller filesystem, LaTeX can find it. I ran latex under truss, and it appears that the xstat() call is returning EOVERFLOW when latex checks on the target file, presumably because the number of blocks on the filesystem does not fit in a 32-bit int. I'm hoping this is just a matter of rebuilding TeTeX with 64-bit filesystem calls enabled. ====================================================================== ---------------------------------------------------------------------- (0008347) pfelecan (manager) - 2010-10-04 18:48 https://www.opencsw.org/mantis/view.php?id=4097#c8347 ---------------------------------------------------------------------- I'm using teTeX daily on a multi-TB ZFS file system and had never this issue. What are the full characteristics of your file system? From noreply at opencsw.org Mon Oct 4 18:49:02 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 18:49:02 +0200 Subject: [bug-notifications] [tetex 0004097]: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used In-Reply-To: <7ac39f56776882d59980bf4fa41591c6> Message-ID: <3b03ecfda6fd43f8a21934e9928f3def@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4097 ====================================================================== Reported By: adb Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 4097 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2009-12-24 02:53 CET Last Modified: 2010-10-04 18:49 CEST ====================================================================== Summary: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used Description: On our multi-TB filesystems, the CSW LaTeX gives the error "can't find file". When the same file is moved to a smaller filesystem, LaTeX can find it. I ran latex under truss, and it appears that the xstat() call is returning EOVERFLOW when latex checks on the target file, presumably because the number of blocks on the filesystem does not fit in a 32-bit int. I'm hoping this is just a matter of rebuilding TeTeX with 64-bit filesystem calls enabled. ====================================================================== ---------------------------------------------------------------------- (0008348) pfelecan (manager) - 2010-10-04 18:49 https://www.opencsw.org/mantis/view.php?id=4097#c8348 ---------------------------------------------------------------------- the detailed characteristics of the file system where this issue occurs. From noreply at opencsw.org Mon Oct 4 19:29:38 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 19:29:38 +0200 Subject: [bug-notifications] [alternatives 0004538]: Symbolic links not created in new sparse-root zone In-Reply-To: <960a7844ae1b95d457c73e12363db4d1> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4538 ====================================================================== Reported By: gadavis Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4538 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-08-31 22:19 CEST Last Modified: 2010-10-04 19:29 CEST ====================================================================== Summary: Symbolic links not created in new sparse-root zone Description: There appears to be a bug in the alternatives mechanism when creating a new sparse-root zone on Solaris 10 systems. I have a global zone with CSW alternatives, CSWneon, CSWsudo, and CSWsudo-common installed. The alternatives mechanism has registered the symlinks in the right locations and alternatives --display neon and alternatives --display sudo work as expected. If I then create a new non-global zone with the default inherited paths (your typical sparse-root zone), alternatives --display whatever shows the correct paths listed, but the symlinks are not there. After zone creation, I have to manually force the alternatives mechanism to install the needed symlinks by running a shell loop: for d in `ls /opt/csw/share/alternatives`; do alt=`basename $d`; alternatives --auto $alt; done Note that if I uninstall CSWsudo inside the zone and then re-install it, the alternatives mechanism works as expected. It's only upon initial zone creation that the alternatives symlinks do not get created. ====================================================================== ---------------------------------------------------------------------- (0008349) philadmin (administrator) - 2010-10-04 19:29 https://www.opencsw.org/mantis/view.php?id=4538#c8349 ---------------------------------------------------------------------- Please tell me of a trigger to use, and I'll be happy to try to use it. Unfortunately, I'm not aware of any. I might instead attempt to make things a little easier for you, by adding a "--relink-all" option to alternatives. That would trigger the "go through the directory" behaviour. The only other solution, would involve having to actually register the symlinks created, with a package. Then the symlink should be duplicated upon zone creation. but I didnt see you comment about that. There's also the question of, WHICH package to register it with? Potentially the one containing the binary being linked to, but I'm not sure. From noreply at opencsw.org Mon Oct 4 20:05:09 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 20:05:09 +0200 Subject: [bug-notifications] [alternatives 0004538]: Symbolic links not created in new sparse-root zone In-Reply-To: <960a7844ae1b95d457c73e12363db4d1> Message-ID: <8ff29997af16efb58f8da9d83ce5da74@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4538 ====================================================================== Reported By: gadavis Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4538 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-08-31 22:19 CEST Last Modified: 2010-10-04 20:05 CEST ====================================================================== Summary: Symbolic links not created in new sparse-root zone Description: There appears to be a bug in the alternatives mechanism when creating a new sparse-root zone on Solaris 10 systems. I have a global zone with CSW alternatives, CSWneon, CSWsudo, and CSWsudo-common installed. The alternatives mechanism has registered the symlinks in the right locations and alternatives --display neon and alternatives --display sudo work as expected. If I then create a new non-global zone with the default inherited paths (your typical sparse-root zone), alternatives --display whatever shows the correct paths listed, but the symlinks are not there. After zone creation, I have to manually force the alternatives mechanism to install the needed symlinks by running a shell loop: for d in `ls /opt/csw/share/alternatives`; do alt=`basename $d`; alternatives --auto $alt; done Note that if I uninstall CSWsudo inside the zone and then re-install it, the alternatives mechanism works as expected. It's only upon initial zone creation that the alternatives symlinks do not get created. ====================================================================== ---------------------------------------------------------------------- (0008350) gadavis (developer) - 2010-10-04 20:05 https://www.opencsw.org/mantis/view.php?id=4538#c8350 ---------------------------------------------------------------------- I unfortunately don't know my way around the class action scripts to say where the action should run. Certainly a --relink-all option would be useful in the mean time. I would suggest that the symlink should be registered with the alternatives package, since it's not really part of the dependent packages that alternatives is switching between. From noreply at opencsw.org Mon Oct 4 21:10:23 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Oct 2010 21:10:23 +0200 Subject: [bug-notifications] [tetex 0004097]: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used In-Reply-To: <7ac39f56776882d59980bf4fa41591c6> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4097 ====================================================================== Reported By: adb Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 4097 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2009-12-24 02:53 CET Last Modified: 2010-10-04 21:10 CEST ====================================================================== Summary: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used Description: On our multi-TB filesystems, the CSW LaTeX gives the error "can't find file". When the same file is moved to a smaller filesystem, LaTeX can find it. I ran latex under truss, and it appears that the xstat() call is returning EOVERFLOW when latex checks on the target file, presumably because the number of blocks on the filesystem does not fit in a 32-bit int. I'm hoping this is just a matter of rebuilding TeTeX with 64-bit filesystem calls enabled. ====================================================================== ---------------------------------------------------------------------- (0008351) adb (reporter) - 2010-10-04 21:10 https://www.opencsw.org/mantis/view.php?id=4097#c8351 ---------------------------------------------------------------------- [I sent this earlier via email, but apparently that doesn't update the issue notes] I think I was mistaken about it being related to # of blocks; it may actually be a issue with the size of inode numbers. The filesystem is NFS-mounted from an Isilon cluster. It's currently 1TB; at the time I submitted the bug report, I think it was rather larger. (It's carved out with a server-side quota from a 1PB filesystem.) I still see the bug on all our Isilon filesystems, but not on NetApp or local filesystems. Files on the Isilon filesystems typically have inode numbers > 2^32, while creating the test file on the NetApp and local filesystems generally yields inode numbers in the millions. Attached are example LaTeX runs with stat information about the file and filesystems. Diffing the strace outputs (stripped of everything but stat calls, with pointer values scrubbed to make the diff work), we see xstat(2, "/opt/csw/share/texmf-dist/aliases", POINTER) = 0 fstat64(3, POINTER) = 0 fstat64(3, POINTER) = 0 -xstat(2, ".", POINTER) = 0 -xstat(2, "./test.ltx", POINTER) = 0 +xstat(2, ".", POINTER) Err#79 EOVERFLOW fstat64(1, POINTER) = 0 fstat64(1, POINTER) = 0 i.e., in the successful run, we stat the current directory, then stat the file, but in the failed run we stat the current directory, get EOVERFLOW, and bail. The "stat" command uses lstat64() rather than xstat(). (I'm assuming xstat() is actually getting called behind the scenes by a library function, since it's undocumented...) From noreply at opencsw.org Tue Oct 5 09:59:09 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 09:59:09 +0200 Subject: [bug-notifications] [tetex 0004097]: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used In-Reply-To: <7ac39f56776882d59980bf4fa41591c6> Message-ID: <70409492e6400ff190c0b3714ebb0f97@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4097 ====================================================================== Reported By: adb Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 4097 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2009-12-24 02:53 CET Last Modified: 2010-10-05 09:59 CEST ====================================================================== Summary: LaTeX "can't find file" when file is on a large filesystem because 32-bit stat() call is used Description: On our multi-TB filesystems, the CSW LaTeX gives the error "can't find file". When the same file is moved to a smaller filesystem, LaTeX can find it. I ran latex under truss, and it appears that the xstat() call is returning EOVERFLOW when latex checks on the target file, presumably because the number of blocks on the filesystem does not fit in a 32-bit int. I'm hoping this is just a matter of rebuilding TeTeX with 64-bit filesystem calls enabled. ====================================================================== ---------------------------------------------------------------------- (0008352) pfelecan (manager) - 2010-10-05 09:59 https://www.opencsw.org/mantis/view.php?id=4097#c8352 ---------------------------------------------------------------------- Thank you for the information. I will look for a test case involving kpathsea. When I have something I'll come back. From noreply at opencsw.org Tue Oct 5 11:17:30 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 11:17:30 +0200 Subject: [bug-notifications] [libcairo 0004565]: libpixman-1.so for 64 bit is not self-contained Message-ID: <45bae0eea187d0d13015c92c0f151439@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4565 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: libcairo Issue ID: 4565 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-05 11:17 CEST Last Modified: 2010-10-05 11:17 CEST ====================================================================== Summary: libpixman-1.so for 64 bit is not self-contained Description: The 32 bit variant works as expected, but the 64 bit variant does not resolve several libraries. PS: I'll also look at cairo 1.10.0, so no need to fix this immediately. dam at testing9s :/home/dam/mgar/pkg/libunique/trunk > ldd -r /opt/csw/lib/libcairo.so.2 /usr/lib/secure/s9_preload.so.1 libsocket.so.1 => /usr/lib/libsocket.so.1 libnsl.so.1 => /usr/lib/libnsl.so.1 libpixman-1.so.0 => /opt/csw/lib/sparcv8/libpixman-1.so.0 libfreetype.so.6 => /opt/csw/lib/sparcv8/libfreetype.so.6 libfontconfig.so.1 => /opt/csw/lib/sparcv8/libfontconfig.so.1 libpng12.so.0 => /opt/csw/lib/sparcv8plus+vis2/libpng12.so.0 libXrender.so.1 => /opt/csw/lib/sparcv8/libXrender.so.1 libX11.so.4 => /usr/lib/libX11.so.4 libz.so.1 => /opt/csw/lib/sparcv8plus+vis/libz.so.1 libm.so.1 => /usr/lib/libm.so.1 libc.so.1 => /usr/lib/libc.so.1 libdl.so.1 => /usr/lib/libdl.so.1 libmp.so.2 => /usr/lib/libmp.so.2 libiconv.so.2 => /opt/csw/lib/sparcv8/libiconv.so.2 libexpat.so.1 => /opt/csw/lib/sparcv8/libexpat.so.1 libXext.so.0 => /usr/openwin/lib/libXext.so.0 /usr/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1 dam at testing9s :/home/dam/mgar/pkg/libunique/trunk > ldd -r /opt/csw/lib/64/libcairo.so.2 /usr/lib/secure/64/s9_preload.so.1 libsocket.so.1 => /usr/lib/64/libsocket.so.1 libnsl.so.1 => /usr/lib/64/libnsl.so.1 libpixman-1.so.0 => (file not found) libfreetype.so.6 => (file not found) libfontconfig.so.1 => /usr/lib/64/libfontconfig.so.1 libpng12.so.0 => (file not found) libXrender.so.1 => (file not found) libX11.so.4 => /usr/lib/64/libX11.so.4 libz.so.1 => /usr/lib/64/libz.so.1 libm.so.1 => /usr/lib/64/libm.so.1 libc.so.1 => /usr/lib/64/libc.so.1 libdl.so.1 => /usr/lib/64/libdl.so.1 libmp.so.2 => /usr/lib/64/libmp.so.2 libfreetype.so.6 => /usr/sfw/lib/sparcv9/libfreetype.so.6 libexpat.so.0 => /usr/lib/fontconfig/sparcv9/libexpat.so.0 libXext.so.0 => /usr/openwin/lib/sparcv9/libXext.so.0 symbol not found: XRenderFreePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText8 (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText16 (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText32 (/opt/csw/lib/64/libcairo.so.2) /usr/platform/SUNW,SPARC-Enterprise-T5220/lib/sparcv9/libc_psr.so.1 symbol not found: pixman_image_get_data (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_width (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_height (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_stride (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_depth (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_format_supported_destination (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_bits (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_unref (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_transform (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_repeat (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_filter (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_composite (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_fill_rectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_add_trapezoids (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_clip_region32 (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_transform_point_3d (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_linear_gradient (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_radial_gradient (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init_rect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init_rects (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_fini (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_copy (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_n_rects (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_rectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_extents (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_subtract (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_intersect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_union_rect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_not_empty (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_translate (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_contains_rectangle (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_component_alpha (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQueryVersion (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFindStandardFormat (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQuerySubpixelOrder (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQueryExtension (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFindVisualFormat (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureClipRectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderChangePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCreatePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureTransform (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureFilter (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderComposite (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFillRectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFillRectangle (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeTrapezoids (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphs (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCreateGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderAddGlyphs (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_error_ptr (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_write_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_info_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_write_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_IHDR (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_bKGD (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_write_user_transform_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_filler (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_image (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_end (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_destroy_write_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_io_ptr (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_error (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_read_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_read_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_IHDR (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_palette_to_rgb (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_expand_gray_1_2_4_to_8 (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_valid (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_tRNS_to_alpha (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_strip_16 (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_packing (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_gray_to_rgb (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_interlace_handling (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_update_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_read_user_transform_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_image (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_end (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_destroy_read_struct (/opt/csw/lib/64/libcairo.so.2) ====================================================================== From noreply at opencsw.org Tue Oct 5 11:17:46 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 11:17:46 +0200 Subject: [bug-notifications] [libcairo 0004565]: libpixman-1.so for 64 bit is not self-contained In-Reply-To: <1c119c55d9a3dc63861b421ee399816a> Message-ID: <2970e7897e38b2084a9d6ce7cbea88d6@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4565 ====================================================================== Reported By: dam Assigned To: dam ====================================================================== Project: libcairo Issue ID: 4565 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-05 11:17 CEST Last Modified: 2010-10-05 11:17 CEST ====================================================================== Summary: libpixman-1.so for 64 bit is not self-contained Description: The 32 bit variant works as expected, but the 64 bit variant does not resolve several libraries. PS: I'll also look at cairo 1.10.0, so no need to fix this immediately. dam at testing9s :/home/dam/mgar/pkg/libunique/trunk > ldd -r /opt/csw/lib/libcairo.so.2 /usr/lib/secure/s9_preload.so.1 libsocket.so.1 => /usr/lib/libsocket.so.1 libnsl.so.1 => /usr/lib/libnsl.so.1 libpixman-1.so.0 => /opt/csw/lib/sparcv8/libpixman-1.so.0 libfreetype.so.6 => /opt/csw/lib/sparcv8/libfreetype.so.6 libfontconfig.so.1 => /opt/csw/lib/sparcv8/libfontconfig.so.1 libpng12.so.0 => /opt/csw/lib/sparcv8plus+vis2/libpng12.so.0 libXrender.so.1 => /opt/csw/lib/sparcv8/libXrender.so.1 libX11.so.4 => /usr/lib/libX11.so.4 libz.so.1 => /opt/csw/lib/sparcv8plus+vis/libz.so.1 libm.so.1 => /usr/lib/libm.so.1 libc.so.1 => /usr/lib/libc.so.1 libdl.so.1 => /usr/lib/libdl.so.1 libmp.so.2 => /usr/lib/libmp.so.2 libiconv.so.2 => /opt/csw/lib/sparcv8/libiconv.so.2 libexpat.so.1 => /opt/csw/lib/sparcv8/libexpat.so.1 libXext.so.0 => /usr/openwin/lib/libXext.so.0 /usr/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1 dam at testing9s :/home/dam/mgar/pkg/libunique/trunk > ldd -r /opt/csw/lib/64/libcairo.so.2 /usr/lib/secure/64/s9_preload.so.1 libsocket.so.1 => /usr/lib/64/libsocket.so.1 libnsl.so.1 => /usr/lib/64/libnsl.so.1 libpixman-1.so.0 => (file not found) libfreetype.so.6 => (file not found) libfontconfig.so.1 => /usr/lib/64/libfontconfig.so.1 libpng12.so.0 => (file not found) libXrender.so.1 => (file not found) libX11.so.4 => /usr/lib/64/libX11.so.4 libz.so.1 => /usr/lib/64/libz.so.1 libm.so.1 => /usr/lib/64/libm.so.1 libc.so.1 => /usr/lib/64/libc.so.1 libdl.so.1 => /usr/lib/64/libdl.so.1 libmp.so.2 => /usr/lib/64/libmp.so.2 libfreetype.so.6 => /usr/sfw/lib/sparcv9/libfreetype.so.6 libexpat.so.0 => /usr/lib/fontconfig/sparcv9/libexpat.so.0 libXext.so.0 => /usr/openwin/lib/sparcv9/libXext.so.0 symbol not found: XRenderFreePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText8 (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText16 (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText32 (/opt/csw/lib/64/libcairo.so.2) /usr/platform/SUNW,SPARC-Enterprise-T5220/lib/sparcv9/libc_psr.so.1 symbol not found: pixman_image_get_data (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_width (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_height (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_stride (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_depth (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_format_supported_destination (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_bits (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_unref (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_transform (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_repeat (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_filter (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_composite (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_fill_rectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_add_trapezoids (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_clip_region32 (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_transform_point_3d (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_linear_gradient (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_radial_gradient (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init_rect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init_rects (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_fini (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_copy (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_n_rects (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_rectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_extents (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_subtract (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_intersect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_union_rect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_not_empty (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_translate (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_contains_rectangle (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_component_alpha (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQueryVersion (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFindStandardFormat (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQuerySubpixelOrder (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQueryExtension (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFindVisualFormat (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureClipRectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderChangePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCreatePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureTransform (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureFilter (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderComposite (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFillRectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFillRectangle (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeTrapezoids (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphs (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCreateGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderAddGlyphs (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_error_ptr (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_write_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_info_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_write_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_IHDR (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_bKGD (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_write_user_transform_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_filler (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_image (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_end (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_destroy_write_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_io_ptr (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_error (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_read_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_read_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_IHDR (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_palette_to_rgb (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_expand_gray_1_2_4_to_8 (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_valid (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_tRNS_to_alpha (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_strip_16 (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_packing (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_gray_to_rgb (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_interlace_handling (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_update_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_read_user_transform_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_image (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_end (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_destroy_read_struct (/opt/csw/lib/64/libcairo.so.2) ====================================================================== From noreply at opencsw.org Tue Oct 5 17:12:00 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 17:12:00 +0200 Subject: [bug-notifications] [libcairo 0004565]: libpixman-1.so for 64 bit is not self-contained In-Reply-To: <1c119c55d9a3dc63861b421ee399816a> Message-ID: <3d37933db69817dc2b4cb0782d42c720@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4565 ====================================================================== Reported By: dam Assigned To: dam ====================================================================== Project: libcairo Issue ID: 4565 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-05 11:17 CEST Last Modified: 2010-10-05 17:11 CEST ====================================================================== Summary: libpixman-1.so for 64 bit is not self-contained Description: The 32 bit variant works as expected, but the 64 bit variant does not resolve several libraries. PS: I'll also look at cairo 1.10.0, so no need to fix this immediately. dam at testing9s :/home/dam/mgar/pkg/libunique/trunk > ldd -r /opt/csw/lib/libcairo.so.2 /usr/lib/secure/s9_preload.so.1 libsocket.so.1 => /usr/lib/libsocket.so.1 libnsl.so.1 => /usr/lib/libnsl.so.1 libpixman-1.so.0 => /opt/csw/lib/sparcv8/libpixman-1.so.0 libfreetype.so.6 => /opt/csw/lib/sparcv8/libfreetype.so.6 libfontconfig.so.1 => /opt/csw/lib/sparcv8/libfontconfig.so.1 libpng12.so.0 => /opt/csw/lib/sparcv8plus+vis2/libpng12.so.0 libXrender.so.1 => /opt/csw/lib/sparcv8/libXrender.so.1 libX11.so.4 => /usr/lib/libX11.so.4 libz.so.1 => /opt/csw/lib/sparcv8plus+vis/libz.so.1 libm.so.1 => /usr/lib/libm.so.1 libc.so.1 => /usr/lib/libc.so.1 libdl.so.1 => /usr/lib/libdl.so.1 libmp.so.2 => /usr/lib/libmp.so.2 libiconv.so.2 => /opt/csw/lib/sparcv8/libiconv.so.2 libexpat.so.1 => /opt/csw/lib/sparcv8/libexpat.so.1 libXext.so.0 => /usr/openwin/lib/libXext.so.0 /usr/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1 dam at testing9s :/home/dam/mgar/pkg/libunique/trunk > ldd -r /opt/csw/lib/64/libcairo.so.2 /usr/lib/secure/64/s9_preload.so.1 libsocket.so.1 => /usr/lib/64/libsocket.so.1 libnsl.so.1 => /usr/lib/64/libnsl.so.1 libpixman-1.so.0 => (file not found) libfreetype.so.6 => (file not found) libfontconfig.so.1 => /usr/lib/64/libfontconfig.so.1 libpng12.so.0 => (file not found) libXrender.so.1 => (file not found) libX11.so.4 => /usr/lib/64/libX11.so.4 libz.so.1 => /usr/lib/64/libz.so.1 libm.so.1 => /usr/lib/64/libm.so.1 libc.so.1 => /usr/lib/64/libc.so.1 libdl.so.1 => /usr/lib/64/libdl.so.1 libmp.so.2 => /usr/lib/64/libmp.so.2 libfreetype.so.6 => /usr/sfw/lib/sparcv9/libfreetype.so.6 libexpat.so.0 => /usr/lib/fontconfig/sparcv9/libexpat.so.0 libXext.so.0 => /usr/openwin/lib/sparcv9/libXext.so.0 symbol not found: XRenderFreePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText8 (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText16 (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeText32 (/opt/csw/lib/64/libcairo.so.2) /usr/platform/SUNW,SPARC-Enterprise-T5220/lib/sparcv9/libc_psr.so.1 symbol not found: pixman_image_get_data (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_width (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_height (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_stride (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_get_depth (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_format_supported_destination (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_bits (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_unref (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_transform (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_repeat (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_filter (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_composite (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_fill_rectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_add_trapezoids (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_clip_region32 (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_transform_point_3d (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_linear_gradient (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_create_radial_gradient (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init_rect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_init_rects (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_fini (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_copy (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_n_rects (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_rectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_extents (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_subtract (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_intersect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_union_rect (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_not_empty (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_translate (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_region32_contains_rectangle (/opt/csw/lib/64/libcairo.so.2) symbol not found: pixman_image_set_component_alpha (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQueryVersion (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFindStandardFormat (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQuerySubpixelOrder (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderQueryExtension (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFindVisualFormat (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureClipRectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderChangePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCreatePicture (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureTransform (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderSetPictureFilter (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderComposite (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFillRectangles (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFillRectangle (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCompositeTrapezoids (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderFreeGlyphs (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderCreateGlyphSet (/opt/csw/lib/64/libcairo.so.2) symbol not found: XRenderAddGlyphs (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_error_ptr (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_write_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_info_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_write_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_IHDR (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_bKGD (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_write_user_transform_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_filler (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_image (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_write_end (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_destroy_write_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_io_ptr (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_error (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_create_read_struct (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_read_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_IHDR (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_palette_to_rgb (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_expand_gray_1_2_4_to_8 (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_get_valid (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_tRNS_to_alpha (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_strip_16 (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_packing (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_gray_to_rgb (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_interlace_handling (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_update_info (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_set_read_user_transform_fn (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_image (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_read_end (/opt/csw/lib/64/libcairo.so.2) symbol not found: png_destroy_read_struct (/opt/csw/lib/64/libcairo.so.2) ====================================================================== ---------------------------------------------------------------------- (0008353) philadmin (administrator) - 2010-10-05 17:11 https://www.opencsw.org/mantis/view.php?id=4565#c8353 ---------------------------------------------------------------------- I did the package as a quick "needs to be done" hack. (and I certainly dont care about 64bit!) So, if you have a need for it, please take over the package. From noreply at opencsw.org Tue Oct 5 20:38:22 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 20:38:22 +0200 Subject: [bug-notifications] [tetex 0003508]: Package shouldn't contain texi2pdf In-Reply-To: <7524d12e6c5ebc4c9b559f33ac66c4a2> Message-ID: <98ffa5d09dc0760665442e78bc150038@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3508 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 3508 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-03-27 17:30 CET Last Modified: 2010-10-05 20:38 CEST ====================================================================== Summary: Package shouldn't contain texi2pdf Description: The package contains /opt/csw/bin/texi2pdf which is also in CSWtexinfo. IMHO it should not be in CSWtetex. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0004318 File clash with CSWtetex ====================================================================== ---------------------------------------------------------------------- (0007650) dam (administrator) - 2010-03-15 12:58 https://www.opencsw.org/mantis/view.php?id=3508#c7650 ---------------------------------------------------------------------- The texi2pdf binary is both in CSWtetex and CSWtexinfo, but the texi2pdf(1) manpage is only in CSWtexinfo, so I think it should be removed from CSWtexinfo. The infokey binary is only in CSWtexinfo and not CSWtexinfo, so the infokey.1 manpage really doesn't belong to CSWtetex and should be removed. Do you see a chance to rebuild the package with GAR? From noreply at opencsw.org Tue Oct 5 20:38:23 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 20:38:23 +0200 Subject: [bug-notifications] [tetex 0004030]: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall In-Reply-To: <9b2c00520f7740773c967a24ed5c158d> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4030 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 4030 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-11-11 16:21 CET Last Modified: 2010-10-05 20:38 CEST ====================================================================== Summary: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall Description: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall ====================================================================== From noreply at opencsw.org Tue Oct 5 20:38:52 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 20:38:52 +0200 Subject: [bug-notifications] [tetex 0004030]: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall In-Reply-To: <9b2c00520f7740773c967a24ed5c158d> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4030 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 4030 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-11-11 16:21 CET Last Modified: 2010-10-05 20:38 CEST ====================================================================== Summary: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall Description: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall ====================================================================== From noreply at opencsw.org Tue Oct 5 20:38:53 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 20:38:53 +0200 Subject: [bug-notifications] [tetex 0003508]: Package shouldn't contain texi2pdf In-Reply-To: <7524d12e6c5ebc4c9b559f33ac66c4a2> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3508 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: tetex Issue ID: 3508 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-03-27 17:30 CET Last Modified: 2010-10-05 20:38 CEST ====================================================================== Summary: Package shouldn't contain texi2pdf Description: The package contains /opt/csw/bin/texi2pdf which is also in CSWtexinfo. IMHO it should not be in CSWtetex. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0004318 File clash with CSWtetex ====================================================================== ---------------------------------------------------------------------- (0007650) dam (administrator) - 2010-03-15 12:58 https://www.opencsw.org/mantis/view.php?id=3508#c7650 ---------------------------------------------------------------------- The texi2pdf binary is both in CSWtetex and CSWtexinfo, but the texi2pdf(1) manpage is only in CSWtexinfo, so I think it should be removed from CSWtexinfo. The infokey binary is only in CSWtexinfo and not CSWtexinfo, so the infokey.1 manpage really doesn't belong to CSWtetex and should be removed. Do you see a chance to rebuild the package with GAR? From noreply at opencsw.org Tue Oct 5 20:39:37 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 20:39:37 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <876f7ac2fb807cfaf875b86f44fd4cc5@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-05 20:39 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008354) holzi (reporter) - 2010-10-05 20:39 https://www.opencsw.org/mantis/view.php?id=4560#c8354 ---------------------------------------------------------------------- Ok did some more digging. Funny thing is that I packaged the package with gar. Using this as a reference: http://sourceforge.net/apps/trac/gar/browser/csw/mgar/pkg/alternatives/branches/alternatives-gar The package created with gar does not have the bug: http://buildfarm.opencsw.org/~jh/alternatives-1.0,REV=2010.10.05-SunOS5.9-all-UNCOMMITTED.pkg.gz It might be that the gar Version does depend on common. Not sure though if thats the only reason. From noreply at opencsw.org Tue Oct 5 21:12:34 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 21:12:34 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <4175aea573bbbc182fff5f01100ba2ef@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-05 21:12 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008355) philadmin (administrator) - 2010-10-05 21:12 https://www.opencsw.org/mantis/view.php?id=4560#c8355 ---------------------------------------------------------------------- Interesting. It would be very useful for us, if you had both the working, and non-working, versions of the package,and could then report any differences after installation that you see, according to pkginfo -l. Or if you want to get gruesomely detailed, pkgparam -v :) From noreply at opencsw.org Tue Oct 5 23:36:43 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Oct 2010 23:36:43 +0200 Subject: [bug-notifications] [dovecot 0004554]: Please upgrade to 1.2.14 In-Reply-To: <83d0bc0e4b91ecfb9698fd6664a460b7> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4554 ====================================================================== Reported By: dam Assigned To: skayser ====================================================================== Project: dovecot Issue ID: 4554 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-26 21:34 CEST Last Modified: 2010-10-05 23:36 CEST ====================================================================== Summary: Please upgrade to 1.2.14 Description: Please upgrade to 1.2.14 as released by sfw today ====================================================================== From noreply at opencsw.org Wed Oct 6 10:33:42 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 10:33:42 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-06 10:33 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008356) holzi (reporter) - 2010-10-06 10:33 https://www.opencsw.org/mantis/view.php?id=4560#c8356 ---------------------------------------------------------------------- sure: orginal version: http://paste.pocoo.org/show/271633/ gar version: http://paste.pocoo.org/show/271634/ From noreply at opencsw.org Wed Oct 6 10:41:31 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 10:41:31 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-06 10:41 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008357) holzi (reporter) - 2010-10-06 10:41 https://www.opencsw.org/mantis/view.php?id=4560#c8357 ---------------------------------------------------------------------- One more thing. I added the dependence to CSWcommon in the original package via pkgtrans. Might have done something wrong but since it produced the same error I guess not. So it's not a dependence problem I think. From noreply at opencsw.org Wed Oct 6 13:40:37 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 13:40:37 +0200 Subject: [bug-notifications] [pm_version 0004566]: Please rebuild without man pages Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4566 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_version Issue ID: 4566 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 13:40 CEST Last Modified: 2010-10-06 13:40 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.82 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 13:51:12 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 13:51:12 +0200 Subject: [bug-notifications] [pm_testsimple 0004567]: Please rebuild without man pages Message-ID: <1099d4df61f19b2a8ec767d1de3e3cff@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4567 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_testsimple Issue ID: 4567 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 13:51 CEST Last Modified: 2010-10-06 13:51 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.96 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 13:55:17 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 13:55:17 +0200 Subject: [bug-notifications] [pm_pkgconst 0004568]: Please rebuild without man pages Message-ID: <2bd1b34aea2de4260ac9711162458df7@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4568 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_pkgconst Issue ID: 4568 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 13:55 CEST Last Modified: 2010-10-06 13:55 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* ====================================================================== From noreply at opencsw.org Wed Oct 6 13:57:47 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 13:57:47 +0200 Subject: [bug-notifications] [pm_objaccessor 0004569]: Please rebuild without man pages Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4569 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_objaccessor Issue ID: 4569 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 13:57 CEST Last Modified: 2010-10-06 13:57 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.36 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 13:59:12 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 13:59:12 +0200 Subject: [bug-notifications] [pm_iozlib 0004570]: Please rebuild without man pages Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4570 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_iozlib Issue ID: 4570 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 13:59 CEST Last Modified: 2010-10-06 13:59 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* ====================================================================== From noreply at opencsw.org Wed Oct 6 14:01:30 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 14:01:30 +0200 Subject: [bug-notifications] [pm_extutparsexs 0004571]: Please rebuild without man pages Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4571 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_extutparsexs Issue ID: 4571 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 14:01 CEST Last Modified: 2010-10-06 14:01 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.2206 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 14:03:40 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 14:03:40 +0200 Subject: [bug-notifications] [pm_extutcbuilder 0004572]: Please rebuild without man pages Message-ID: <86d9fee4cfb14678ce2899b0afa2a0a0@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4572 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_extutcbuilder Issue ID: 4572 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 14:03 CEST Last Modified: 2010-10-06 14:03 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.2703 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 14:04:56 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 14:04:56 +0200 Subject: [bug-notifications] [pm_moduleplug 0004573]: Please rebuild without man pages Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4573 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_moduleplug Issue ID: 4573 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-06 14:04 CEST Last Modified: 2010-10-06 14:04 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* ====================================================================== From noreply at opencsw.org Wed Oct 6 19:21:12 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 19:21:12 +0200 Subject: [bug-notifications] [alternatives 0004560]: /opt/csw/sbin/alternatives not installed in sparse zone In-Reply-To: <769f5ab44be7e7fcc92e4351ec650807> Message-ID: <0f1d4842f95c877bf080910a640fb504@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4560 ====================================================================== Reported By: holzi Assigned To: phil ====================================================================== Project: alternatives Issue ID: 4560 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-01 16:13 CEST Last Modified: 2010-10-06 19:21 CEST ====================================================================== Summary: /opt/csw/sbin/alternatives not installed in sparse zone Description: I have CSWsudo installed in globle zone. Hence alternatives too. If I create a sparse zone alternatives is not installed correct into the sparse zone. Hence no symlinks for sudo. pkgchk CSWalternatives ERROR: /opt/csw/sbin/alternatives pathname does not exist The script is missing. ====================================================================== ---------------------------------------------------------------------- (0008358) phil (manager) - 2010-10-06 19:21 https://www.opencsw.org/mantis/view.php?id=4560#c8358 ---------------------------------------------------------------------- Thanks. Fyi I deleted my comment from my other account asking you to post those two pkginfo outputs, 'cause i was sick of getting dup emails of things :) (anoying that I didnt see a way in mantis to turn off email cc's for that acct. oh well) Sooo.. I noticed Two things: 1. the gar version is CATEGORY: application but other one is category system. I wouldnt think that should matter, but... maybe experiment later. 2. the gar version shows FILES: 12 installed pathnames 2 shared pathnames whereas the regular "as-shipped" version does not. It only shows *3* files installed. Its kinda like you only installed the normal version to global zone, but you installed the gar version "fully". Which makes me wonder if you somehow installed the currently released version with pkgadd -G. Perhaps you can manually install the current version in global zone again by hand, making sure to NOT use -G, and see if things suddenly look good? From noreply at opencsw.org Wed Oct 6 21:29:52 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 21:29:52 +0200 Subject: [bug-notifications] [pm_testsimple 0004567]: Please rebuild without man pages In-Reply-To: <41165bea8082e27613b4dd0831010549> Message-ID: <01120a953b87cd40bbc7eb7ae561e6cf@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4567 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_testsimple Issue ID: 4567 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-06 13:51 CEST Last Modified: 2010-10-06 21:29 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.96 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 21:31:52 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 21:31:52 +0200 Subject: [bug-notifications] [pm_extutcbuilder 0004572]: Please rebuild without man pages In-Reply-To: <5dff754092bbdc1229cf7489fbf8c6cc> Message-ID: <51483c8c2b32afeb26727dded60b4407@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4572 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_extutcbuilder Issue ID: 4572 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-06 14:03 CEST Last Modified: 2010-10-06 21:31 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.2703 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 21:35:29 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 21:35:29 +0200 Subject: [bug-notifications] [pm_extutparsexs 0004571]: Please rebuild without man pages In-Reply-To: <98eae544fc8e51693d2d78e00926f46c> Message-ID: <67f5ab3f2ebe4c505d9ec065123f84c1@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4571 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_extutparsexs Issue ID: 4571 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-06 14:01 CEST Last Modified: 2010-10-06 21:35 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.2206 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 21:38:51 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 21:38:51 +0200 Subject: [bug-notifications] [pm_iocompress 0004564]: Please rebuild without man pages In-Reply-To: <056b02503b2fc0c3ce2cc0c4e2f7da4d> Message-ID: <18d536ec802cb9d4f75645e9338fa3a6@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4564 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_iocompress Issue ID: 4564 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-04 17:30 CEST Last Modified: 2010-10-06 21:38 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.030 has been released. ====================================================================== From noreply at opencsw.org Wed Oct 6 21:51:03 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Oct 2010 21:51:03 +0200 Subject: [bug-notifications] [pm_moduleplug 0004573]: Please rebuild without man pages In-Reply-To: Message-ID: <04c7b0c44dd5193e35cb7d88dabbe46d@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4573 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_moduleplug Issue ID: 4573 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-06 14:04 CEST Last Modified: 2010-10-06 21:51 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* ====================================================================== From noreply at opencsw.org Thu Oct 7 14:36:25 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Oct 2010 14:36:25 +0200 Subject: [bug-notifications] [pm_version 0004566]: Please rebuild without man pages In-Reply-To: <5610bae4f0a5e8eea5aaecd77c89d7cf> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4566 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_version Issue ID: 4566 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-06 13:40 CEST Last Modified: 2010-10-07 14:36 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.82 has been released. ====================================================================== From noreply at opencsw.org Thu Oct 7 14:37:25 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Oct 2010 14:37:25 +0200 Subject: [bug-notifications] [pm_version 0004566]: Please rebuild without man pages In-Reply-To: <5610bae4f0a5e8eea5aaecd77c89d7cf> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4566 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_version Issue ID: 4566 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-06 13:40 CEST Last Modified: 2010-10-07 14:37 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.82 has been released. ====================================================================== ---------------------------------------------------------------------- (0008359) bonivart (developer) - 2010-10-07 14:37 https://www.opencsw.org/mantis/view.php?id=4566#c8359 ---------------------------------------------------------------------- Since Benny is on sabbatical (according to Dago) I have rebuilt this package. From noreply at opencsw.org Thu Oct 7 14:37:31 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Oct 2010 14:37:31 +0200 Subject: [bug-notifications] [pm_compressrawbz2 0004563]: Please rebuild without man pages In-Reply-To: Message-ID: <1fcea504df17e75d85a8e52d82d4a0e6@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4563 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_compressrawbz2 Issue ID: 4563 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-04 17:27 CEST Last Modified: 2010-10-07 14:37 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.030 has been released. ====================================================================== From noreply at opencsw.org Thu Oct 7 14:37:42 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Oct 2010 14:37:42 +0200 Subject: [bug-notifications] [pm_compressrawbz2 0004563]: Please rebuild without man pages In-Reply-To: Message-ID: <09c1fdd460763705c6be14238d58ae2a@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4563 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_compressrawbz2 Issue ID: 4563 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-04 17:27 CEST Last Modified: 2010-10-07 14:37 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.030 has been released. ====================================================================== ---------------------------------------------------------------------- (0008360) bonivart (developer) - 2010-10-07 14:37 https://www.opencsw.org/mantis/view.php?id=4563#c8360 ---------------------------------------------------------------------- Since Benny is on sabbatical (according to Dago) I have rebuilt this package. From noreply at opencsw.org Thu Oct 7 14:37:45 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Oct 2010 14:37:45 +0200 Subject: [bug-notifications] [pm_compressrawzlib 0004562]: Please rebuild without man pages In-Reply-To: Message-ID: <995cc858a79c4bd7a6c8f6669bcb312b@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4562 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_compressrawzlib Issue ID: 4562 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-04 17:26 CEST Last Modified: 2010-10-07 14:37 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.031 has been released. ====================================================================== From noreply at opencsw.org Thu Oct 7 14:37:55 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Oct 2010 14:37:55 +0200 Subject: [bug-notifications] [pm_compressrawzlib 0004562]: Please rebuild without man pages In-Reply-To: Message-ID: <7d5ba5d0335748119a9608a17d278f14@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4562 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_compressrawzlib Issue ID: 4562 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-04 17:26 CEST Last Modified: 2010-10-07 14:37 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.031 has been released. ====================================================================== ---------------------------------------------------------------------- (0008361) bonivart (developer) - 2010-10-07 14:37 https://www.opencsw.org/mantis/view.php?id=4562#c8361 ---------------------------------------------------------------------- Since Benny is on sabbatical (according to Dago) I have rebuilt this package. From noreply at opencsw.org Thu Oct 7 20:07:49 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Oct 2010 20:07:49 +0200 Subject: [bug-notifications] [lighttpd 0004574]: LIB path to libgcc_s.so.1 pointing to incorrect location Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4574 ====================================================================== Reported By: atmphil Assigned To: ====================================================================== Project: lighttpd Issue ID: 4574 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-07 20:07 CEST Last Modified: 2010-10-07 20:07 CEST ====================================================================== Summary: LIB path to libgcc_s.so.1 pointing to incorrect location Description: Can not find lib PATH to libgcc_s.so.1 File installed with CSWgcc4corert though dependency CSWgcc4g++rt workaround: unconfigure mod_indexfile.so or put /opt/csw/gcc4/lib in LIB path crle -l /usr/lib:/lib:/opt/csw/gcc4/lib ====================================================================== From noreply at opencsw.org Fri Oct 8 20:04:35 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 8 Oct 2010 20:04:35 +0200 Subject: [bug-notifications] [wireshark 0004548]: Please Update Wireshark to latest stable release (currently 1.4.0) from Wireshark.org In-Reply-To: <047aedc6bd702739e7f43bca56af3e1b> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4548 ====================================================================== Reported By: alfyj Assigned To: hson ====================================================================== Project: wireshark Issue ID: 4548 Category: upgrade Reproducibility: N/A Severity: feature Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-09 22:01 CEST Last Modified: 2010-10-08 20:04 CEST ====================================================================== Summary: Please Update Wireshark to latest stable release (currently 1.4.0) from Wireshark.org Description: Current release 1.2.3 is at least 18 months old as a Solaris package, and probably additional months behind the Windows & OSX versions available at wireshark.org. My users are asking me to upgrade our server, which has monitor feeds from multiple routers in our lab. ====================================================================== ---------------------------------------------------------------------- (0008362) alfyj (reporter) - 2010-10-08 20:04 https://www.opencsw.org/mantis/view.php?id=4548#c8362 ---------------------------------------------------------------------- I installed the new 1.4.0 build and it looks good intitially. It is working better than the 1.2.10 build from sunfreeware which was core-ing a lot. 1.4.0 appears to run stabley for a couple minutes of tracing on a couple different feeds. I am going to put this version up as our active version and let our users see if they see any problems. I will let you know if I see any issues. From noreply at opencsw.org Sun Oct 10 02:55:53 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 10 Oct 2010 02:55:53 +0200 Subject: [bug-notifications] [libxslt 0004429]: Please upgrade to 1.1.26 In-Reply-To: <0284a7542e0d9baa76850250e53d842c> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4429 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: libxslt Issue ID: 4429 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-05-26 10:00 CEST Last Modified: 2010-10-10 02:55 CEST ====================================================================== Summary: Please upgrade to 1.1.26 Description: Please upgrade to 1.1.26 as released from sfw: http://xmlsoft.org/sources/ ====================================================================== ---------------------------------------------------------------------- (0008363) bwalton (manager) - 2010-10-10 02:55 https://www.opencsw.org/mantis/view.php?id=4429#c8363 ---------------------------------------------------------------------- New version pushed for release. From noreply at opencsw.org Sun Oct 10 13:11:19 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 10 Oct 2010 13:11:19 +0200 Subject: [bug-notifications] [netsnmp 0004575]: Version 5.6 is out Message-ID: <08144e47602846778bff56e8121bd480@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4575 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: netsnmp Issue ID: 4575 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-10 13:11 CEST Last Modified: 2010-10-10 13:11 CEST ====================================================================== Summary: Version 5.6 is out Description: Version 5.6 is out, maybe it compiles better than 5.5? ====================================================================== From noreply at opencsw.org Tue Oct 12 11:05:41 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 12 Oct 2010 11:05:41 +0200 Subject: [bug-notifications] [pm_compressrawzlib 0004562]: Please rebuild without man pages In-Reply-To: Message-ID: <9108e26ef0b77c04aa0232a0d2068540@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4562 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_compressrawzlib Issue ID: 4562 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-04 17:26 CEST Last Modified: 2010-10-12 11:05 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.031 has been released. ====================================================================== ---------------------------------------------------------------------- (0008365) bonivart (manager) - 2010-10-12 11:05 https://www.opencsw.org/mantis/view.php?id=4562#c8365 ---------------------------------------------------------------------- Released to current. From noreply at opencsw.org Tue Oct 12 11:05:51 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 12 Oct 2010 11:05:51 +0200 Subject: [bug-notifications] [pm_compressrawbz2 0004563]: Please rebuild without man pages In-Reply-To: Message-ID: <28b087d1d9e71d7451a71cac4d7db461@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4563 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_compressrawbz2 Issue ID: 4563 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-04 17:27 CEST Last Modified: 2010-10-12 11:05 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.030 has been released. ====================================================================== ---------------------------------------------------------------------- (0008366) bonivart (manager) - 2010-10-12 11:05 https://www.opencsw.org/mantis/view.php?id=4563#c8366 ---------------------------------------------------------------------- Released to current. From noreply at opencsw.org Tue Oct 12 11:06:01 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 12 Oct 2010 11:06:01 +0200 Subject: [bug-notifications] [pm_version 0004566]: Please rebuild without man pages In-Reply-To: <5610bae4f0a5e8eea5aaecd77c89d7cf> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4566 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: pm_version Issue ID: 4566 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-06 13:40 CEST Last Modified: 2010-10-12 11:06 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.82 has been released. ====================================================================== ---------------------------------------------------------------------- (0008367) bonivart (manager) - 2010-10-12 11:06 https://www.opencsw.org/mantis/view.php?id=4566#c8367 ---------------------------------------------------------------------- Released to current. From noreply at opencsw.org Thu Oct 14 12:09:20 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 14 Oct 2010 12:09:20 +0200 Subject: [bug-notifications] [gcc4g++ 0004576]: error trying to exec 'cc1': execvp: No such file or directory Message-ID: <9ec8f45ba96369882593468c83b91694@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4576 ====================================================================== Reported By: maciej Assigned To: ====================================================================== Project: gcc4g++ Issue ID: 4576 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-14 12:09 CEST Last Modified: 2010-10-14 12:09 CEST ====================================================================== Summary: error trying to exec 'cc1': execvp: No such file or directory Description: When compiling in the cross-compiler mode, the compiler looks at a couple paths, but doesn't find cc1. ====================================================================== From noreply at opencsw.org Thu Oct 14 13:15:20 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 14 Oct 2010 13:15:20 +0200 Subject: [bug-notifications] [adobereader 0004577]: binary points to wrong place Message-ID: <682225cea5e1a37773f22f29ebd05f44@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4577 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: adobereader Issue ID: 4577 Category: regular use Reproducibility: always Severity: block Priority: immediate Status: new ====================================================================== Date Submitted: 2010-10-14 13:15 CEST Last Modified: 2010-10-14 13:15 CEST ====================================================================== Summary: binary points to wrong place Description: $ /opt/csw/bin/acroread zsh: no such file or directory: /opt/csw/bin/acroread $ ls -l /opt/csw/bin/acroread lrwxrwxrwx 1 root root 35 Oct 14 12:06 /opt/csw/bin/acroread -> ../share/Adobe/Reader9/bin/acroread $ ls -l /opt/csw/share/Adobe/Reader9/bin/acroread /opt/csw/share/Adobe/Reader9/bin/acroread: No such file or directory $ uname -p sparc ====================================================================== From noreply at opencsw.org Mon Oct 18 09:42:44 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 09:42:44 +0200 Subject: [bug-notifications] [adobereader 0004577]: binary points to wrong place In-Reply-To: <9fba32912396efba891e32dc325dc1fa> Message-ID: <0cb85508286e829123efc310d81d5250@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4577 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: adobereader Issue ID: 4577 Category: regular use Reproducibility: always Severity: block Priority: immediate Status: assigned ====================================================================== Date Submitted: 2010-10-14 13:15 CEST Last Modified: 2010-10-18 09:42 CEST ====================================================================== Summary: binary points to wrong place Description: $ /opt/csw/bin/acroread zsh: no such file or directory: /opt/csw/bin/acroread $ ls -l /opt/csw/bin/acroread lrwxrwxrwx 1 root root 35 Oct 14 12:06 /opt/csw/bin/acroread -> ../share/Adobe/Reader9/bin/acroread $ ls -l /opt/csw/share/Adobe/Reader9/bin/acroread /opt/csw/share/Adobe/Reader9/bin/acroread: No such file or directory $ uname -p sparc ====================================================================== From noreply at opencsw.org Mon Oct 18 10:23:13 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:23:13 +0200 Subject: [bug-notifications] [bison 0004456]: Please provide /opt/csw/gnu links In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4456 ====================================================================== Reported By: bwalton Assigned To: dam ====================================================================== Project: bison Issue ID: 4456 Category: packaging Reproducibility: N/A Severity: trivial Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-06-17 03:15 CEST Last Modified: 2010-10-18 10:23 CEST ====================================================================== Summary: Please provide /opt/csw/gnu links Description: All packages providing g* binaries in /opt/csw/bin should now provide a symlink from /opt/csw/gnu/$bin_without_g_prefix to /opt/csw/bin/$bin_with_g_prefix (eg: /opt/csw/gnu/ls -> /opt/csw/bin/gls. Please update this package and let Ben know so he can drop the links from CSWgnulinks. ====================================================================== ---------------------------------------------------------------------- (0008368) dam (administrator) - 2010-10-18 10:23 https://www.opencsw.org/mantis/view.php?id=4456#c8368 ---------------------------------------------------------------------- Fixed in 2.4.3,REV=2010.10.04 and released to current/. From noreply at opencsw.org Mon Oct 18 10:24:15 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:24:15 +0200 Subject: [bug-notifications] [pm_extutcbuilder 0004572]: Please rebuild without man pages In-Reply-To: <5dff754092bbdc1229cf7489fbf8c6cc> Message-ID: <10182350538aaac6f67d542bbb392d74@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4572 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_extutcbuilder Issue ID: 4572 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-06 14:03 CEST Last Modified: 2010-10-18 10:24 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.2703 has been released. ====================================================================== ---------------------------------------------------------------------- (0008369) dam (administrator) - 2010-10-18 10:24 https://www.opencsw.org/mantis/view.php?id=4572#c8369 ---------------------------------------------------------------------- Fixed in 0.2703,REV=2010.10.06 and released to current/. From noreply at opencsw.org Mon Oct 18 10:26:46 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:26:46 +0200 Subject: [bug-notifications] [texinfo 0004318]: File clash with CSWtetex In-Reply-To: <9e534410ddf4ebe6e927b316f93a1d78> Message-ID: <6a2ac26407a85ebdb4d2352d60318e49@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4318 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: texinfo Issue ID: 4318 Category: other Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-03-02 20:21 CET Last Modified: 2010-10-18 10:26 CEST ====================================================================== Summary: File clash with CSWtetex Description: The following files are in CSWtetex: /opt/csw/bin/texi2pdf /opt/csw/share/man/man1/infokey.1 ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0003508 Package shouldn't contain texi2pdf ====================================================================== ---------------------------------------------------------------------- (0008370) dam (administrator) - 2010-10-18 10:26 https://www.opencsw.org/mantis/view.php?id=4318#c8370 ---------------------------------------------------------------------- The issue has been fixed in https://www.opencsw.org/mantis/view.php?id=3508 for tetex, so the files can stay for CSWtexinfo. From noreply at opencsw.org Mon Oct 18 10:26:53 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:26:53 +0200 Subject: [bug-notifications] [texinfo 0004318]: File clash with CSWtetex In-Reply-To: <9e534410ddf4ebe6e927b316f93a1d78> Message-ID: <6805511639e73d5402f2f98a5fbd483f@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4318 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: texinfo Issue ID: 4318 Category: other Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-03-02 20:21 CET Last Modified: 2010-10-18 10:26 CEST ====================================================================== Summary: File clash with CSWtetex Description: The following files are in CSWtetex: /opt/csw/bin/texi2pdf /opt/csw/share/man/man1/infokey.1 ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0003508 Package shouldn't contain texi2pdf ====================================================================== ---------------------------------------------------------------------- (0008370) dam (administrator) - 2010-10-18 10:26 https://www.opencsw.org/mantis/view.php?id=4318#c8370 ---------------------------------------------------------------------- The issue has been fixed in https://www.opencsw.org/mantis/view.php?id=3508 for tetex, so the files can stay for CSWtexinfo. From noreply at opencsw.org Mon Oct 18 10:28:03 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:28:03 +0200 Subject: [bug-notifications] [pm_testsimple 0004567]: Please rebuild without man pages In-Reply-To: <41165bea8082e27613b4dd0831010549> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4567 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_testsimple Issue ID: 4567 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-06 13:51 CEST Last Modified: 2010-10-18 10:28 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 0.96 has been released. ====================================================================== ---------------------------------------------------------------------- (0008371) dam (administrator) - 2010-10-18 10:28 https://www.opencsw.org/mantis/view.php?id=4567#c8371 ---------------------------------------------------------------------- Fixed in 0.96,REV=2010.10.06 and released to current/. From noreply at opencsw.org Mon Oct 18 10:46:15 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:46:15 +0200 Subject: [bug-notifications] [pm_moduleplug 0004573]: Please rebuild without man pages In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4573 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_moduleplug Issue ID: 4573 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-06 14:04 CEST Last Modified: 2010-10-18 10:46 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* ====================================================================== ---------------------------------------------------------------------- (0008372) dam (administrator) - 2010-10-18 10:46 https://www.opencsw.org/mantis/view.php?id=4573#c8372 ---------------------------------------------------------------------- Fixed in 3.9,REV=2010.10.06 and released to current/. From noreply at opencsw.org Mon Oct 18 10:47:53 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:47:53 +0200 Subject: [bug-notifications] [rssh 0004549]: Runtime depends on CSWossh which isn't really required In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4549 ====================================================================== Reported By: nicols Assigned To: dam ====================================================================== Project: rssh Issue ID: 4549 Category: packaging Reproducibility: N/A Severity: tweak Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-09-13 10:55 CEST Last Modified: 2010-10-18 10:47 CEST ====================================================================== Summary: Runtime depends on CSWossh which isn't really required Description: CSWossh shouldn't be runtime required for rssh We use Sun's SSH Daemon, but want rssh for rsync - thus we don't need rssh to link again CSWossh. Obviously, CSWossh still needs to be a build depend though ====================================================================== ---------------------------------------------------------------------- (0008373) dam (administrator) - 2010-10-18 10:47 https://www.opencsw.org/mantis/view.php?id=4549#c8373 ---------------------------------------------------------------------- Fixed in 2.3.3,REV=2010.09.30 and released to current/. From noreply at opencsw.org Mon Oct 18 10:49:26 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:49:26 +0200 Subject: [bug-notifications] [texinfo 0004318]: File clash with CSWtetex In-Reply-To: <9e534410ddf4ebe6e927b316f93a1d78> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4318 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: texinfo Issue ID: 4318 Category: other Reproducibility: always Severity: major Priority: normal Status: closed Resolution: no change required Fixed in Version: ====================================================================== Date Submitted: 2010-03-02 20:21 CET Last Modified: 2010-10-18 10:49 CEST ====================================================================== Summary: File clash with CSWtetex Description: The following files are in CSWtetex: /opt/csw/bin/texi2pdf /opt/csw/share/man/man1/infokey.1 ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0003508 Package shouldn't contain texi2pdf ====================================================================== ---------------------------------------------------------------------- (0008370) dam (administrator) - 2010-10-18 10:26 https://www.opencsw.org/mantis/view.php?id=4318#c8370 ---------------------------------------------------------------------- The issue has been fixed in https://www.opencsw.org/mantis/view.php?id=3508 for tetex, so the files can stay for CSWtexinfo. From noreply at opencsw.org Mon Oct 18 10:50:27 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:50:27 +0200 Subject: [bug-notifications] [pm_extutparsexs 0004571]: Please rebuild without man pages In-Reply-To: <98eae544fc8e51693d2d78e00926f46c> Message-ID: <5cae68004f655bfc0568e0db6e833945@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4571 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_extutparsexs Issue ID: 4571 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-06 14:01 CEST Last Modified: 2010-10-18 10:50 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* Also note that 2.2206 has been released. ====================================================================== ---------------------------------------------------------------------- (0008374) dam (administrator) - 2010-10-18 10:50 https://www.opencsw.org/mantis/view.php?id=4571#c8374 ---------------------------------------------------------------------- Fixed in 2.2206,REV=2010.10.06 and released to current/. From noreply at opencsw.org Mon Oct 18 10:51:03 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 10:51:03 +0200 Subject: [bug-notifications] [pm_iozlib 0004570]: Please rebuild without man pages In-Reply-To: <2a559d5baa21b48ebcd3cf534ea3b531> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4570 ====================================================================== Reported By: bonivart Assigned To: dam ====================================================================== Project: pm_iozlib Issue ID: 4570 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-06 13:59 CEST Last Modified: 2010-10-18 10:51 CEST ====================================================================== Summary: Please rebuild without man pages Description: Due to a conflict with man pages from CSWperldoc I would like you to rebuild your package without man pages. A line this in GAR should take care of it: EXTRA_MERGE_EXCLUDE_FILES = .*\/man\/man3\/.* .*\/man\/man1\/.* ====================================================================== From noreply at opencsw.org Mon Oct 18 12:57:14 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 12:57:14 +0200 Subject: [bug-notifications] [adobereader 0004577]: binary points to wrong place In-Reply-To: <9fba32912396efba891e32dc325dc1fa> Message-ID: <1ad4846eed77b4de0cd7b0c6a9ae870b@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4577 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: adobereader Issue ID: 4577 Category: regular use Reproducibility: always Severity: block Priority: immediate Status: feedback ====================================================================== Date Submitted: 2010-10-14 13:15 CEST Last Modified: 2010-10-18 12:57 CEST ====================================================================== Summary: binary points to wrong place Description: $ /opt/csw/bin/acroread zsh: no such file or directory: /opt/csw/bin/acroread $ ls -l /opt/csw/bin/acroread lrwxrwxrwx 1 root root 35 Oct 14 12:06 /opt/csw/bin/acroread -> ../share/Adobe/Reader9/bin/acroread $ ls -l /opt/csw/share/Adobe/Reader9/bin/acroread /opt/csw/share/Adobe/Reader9/bin/acroread: No such file or directory $ uname -p sparc ====================================================================== ---------------------------------------------------------------------- (0008375) dam (administrator) - 2010-10-18 12:57 https://www.opencsw.org/mantis/view.php?id=4577#c8375 ---------------------------------------------------------------------- The package had another flaw with a missing library dependency for CSWpango. Please verify: http://buildfarm.opencsw.org/experimental.html#adobe From noreply at opencsw.org Mon Oct 18 13:14:58 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 13:14:58 +0200 Subject: [bug-notifications] [adobereader 0004577]: binary points to wrong place In-Reply-To: <9fba32912396efba891e32dc325dc1fa> Message-ID: <5ac19cabc854089d1f8b7ae1f70ed851@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4577 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: adobereader Issue ID: 4577 Category: regular use Reproducibility: always Severity: block Priority: immediate Status: feedback ====================================================================== Date Submitted: 2010-10-14 13:15 CEST Last Modified: 2010-10-18 13:14 CEST ====================================================================== Summary: binary points to wrong place Description: $ /opt/csw/bin/acroread zsh: no such file or directory: /opt/csw/bin/acroread $ ls -l /opt/csw/bin/acroread lrwxrwxrwx 1 root root 35 Oct 14 12:06 /opt/csw/bin/acroread -> ../share/Adobe/Reader9/bin/acroread $ ls -l /opt/csw/share/Adobe/Reader9/bin/acroread /opt/csw/share/Adobe/Reader9/bin/acroread: No such file or directory $ uname -p sparc ====================================================================== ---------------------------------------------------------------------- (0008376) james (developer) - 2010-10-18 13:14 https://www.opencsw.org/mantis/view.php?id=4577#c8376 ---------------------------------------------------------------------- Installed and started on a sparc machine. I had CSWpango already so the missing depend didn't show. From noreply at opencsw.org Mon Oct 18 13:29:29 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 13:29:29 +0200 Subject: [bug-notifications] [adobereader 0004577]: binary points to wrong place In-Reply-To: <9fba32912396efba891e32dc325dc1fa> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4577 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: adobereader Issue ID: 4577 Category: regular use Reproducibility: always Severity: block Priority: immediate Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-14 13:15 CEST Last Modified: 2010-10-18 13:29 CEST ====================================================================== Summary: binary points to wrong place Description: $ /opt/csw/bin/acroread zsh: no such file or directory: /opt/csw/bin/acroread $ ls -l /opt/csw/bin/acroread lrwxrwxrwx 1 root root 35 Oct 14 12:06 /opt/csw/bin/acroread -> ../share/Adobe/Reader9/bin/acroread $ ls -l /opt/csw/share/Adobe/Reader9/bin/acroread /opt/csw/share/Adobe/Reader9/bin/acroread: No such file or directory $ uname -p sparc ====================================================================== ---------------------------------------------------------------------- (0008377) dam (administrator) - 2010-10-18 13:29 https://www.opencsw.org/mantis/view.php?id=4577#c8377 ---------------------------------------------------------------------- Fixed in 8.1.7,REV=2010.10.18 and released to current/. From noreply at opencsw.org Mon Oct 18 13:32:23 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 13:32:23 +0200 Subject: [bug-notifications] [adobereader 0004577]: binary points to wrong place In-Reply-To: <9fba32912396efba891e32dc325dc1fa> Message-ID: <841ce852a67f59063a767d643c7dcda8@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4577 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: adobereader Issue ID: 4577 Category: regular use Reproducibility: always Severity: block Priority: immediate Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-14 13:15 CEST Last Modified: 2010-10-18 13:32 CEST ====================================================================== Summary: binary points to wrong place Description: $ /opt/csw/bin/acroread zsh: no such file or directory: /opt/csw/bin/acroread $ ls -l /opt/csw/bin/acroread lrwxrwxrwx 1 root root 35 Oct 14 12:06 /opt/csw/bin/acroread -> ../share/Adobe/Reader9/bin/acroread $ ls -l /opt/csw/share/Adobe/Reader9/bin/acroread /opt/csw/share/Adobe/Reader9/bin/acroread: No such file or directory $ uname -p sparc ====================================================================== ---------------------------------------------------------------------- (0008378) dam (administrator) - 2010-10-18 13:32 https://www.opencsw.org/mantis/view.php?id=4577#c8378 ---------------------------------------------------------------------- BTW, the missing pango dependency only showed up on Solaris 9 where the system itself doesn't come with libpangoxft.so From noreply at opencsw.org Mon Oct 18 13:37:33 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 13:37:33 +0200 Subject: [bug-notifications] [adobereader 0004577]: binary points to wrong place In-Reply-To: <9fba32912396efba891e32dc325dc1fa> Message-ID: <2ac563725cd3adcbfe81476f295522b7@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4577 ====================================================================== Reported By: james Assigned To: dam ====================================================================== Project: adobereader Issue ID: 4577 Category: regular use Reproducibility: always Severity: block Priority: immediate Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-14 13:15 CEST Last Modified: 2010-10-18 13:37 CEST ====================================================================== Summary: binary points to wrong place Description: $ /opt/csw/bin/acroread zsh: no such file or directory: /opt/csw/bin/acroread $ ls -l /opt/csw/bin/acroread lrwxrwxrwx 1 root root 35 Oct 14 12:06 /opt/csw/bin/acroread -> ../share/Adobe/Reader9/bin/acroread $ ls -l /opt/csw/share/Adobe/Reader9/bin/acroread /opt/csw/share/Adobe/Reader9/bin/acroread: No such file or directory $ uname -p sparc ====================================================================== ---------------------------------------------------------------------- (0008379) james (developer) - 2010-10-18 13:37 https://www.opencsw.org/mantis/view.php?id=4577#c8379 ---------------------------------------------------------------------- I'm slacking, I only ran it up on S10. From noreply at opencsw.org Mon Oct 18 21:15:11 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 18 Oct 2010 21:15:11 +0200 Subject: [bug-notifications] [perl 0004544]: perl is missing DB_File.pm In-Reply-To: <72c7a47afe735db2b8d109e5a6e129d4> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4544 ====================================================================== Reported By: arw Assigned To: bonivart ====================================================================== Project: perl Issue ID: 4544 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-09-04 22:17 CEST Last Modified: 2010-10-18 21:15 CEST ====================================================================== Summary: perl is missing DB_File.pm Description: current perl package is missing DB_File.pm which breaks e.g. spamassassin Bayes-filtering. See error output in 'Additional Information'. Earlier versions of the perl 5.10.1 still included DB_File: Compare http://webcache.googleusercontent.com/search?q=cache:s-uSuGiWrqAJ:www.opencsw.org/search/perl/+DB_File.pm+opencsw&cd=2&hl=de&ct=clnk to current file list. ====================================================================== ---------------------------------------------------------------------- (0008380) jgoerzen (developer) - 2010-10-18 21:15 https://www.opencsw.org/mantis/view.php?id=4544#c8380 ---------------------------------------------------------------------- I also hit this bug when my spamassassin bayes filtering stopped working. I did as suggested and reverted to the older perl-5.10.1,REV=2009.12.15 package. Thanks for keeping an old packages available. From noreply at opencsw.org Tue Oct 19 03:37:10 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Oct 2010 03:37:10 +0200 Subject: [bug-notifications] [gfile 0004578]: man page not formatted correctly Message-ID: <7ae9b30c0d852716fa36ba22ce6ed770@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4578 ====================================================================== Reported By: flod Assigned To: ====================================================================== Project: gfile Issue ID: 4578 Category: regular use Reproducibility: always Severity: text Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-19 03:37 CEST Last Modified: 2010-10-19 03:37 CEST ====================================================================== Summary: man page not formatted correctly Description: man gfile shows a scrambled man page ====================================================================== From noreply at opencsw.org Tue Oct 19 13:32:29 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Oct 2010 13:32:29 +0200 Subject: [bug-notifications] [apache2 0004579]: Can not install in zone Message-ID: <58364d2da52bfdaad465bd9a6bb929cc@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4579 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2 Issue ID: 4579 Category: packaging Reproducibility: sometimes Severity: block Priority: high Status: new ====================================================================== Date Submitted: 2010-10-19 13:32 CEST Last Modified: 2010-10-19 13:32 CEST ====================================================================== Summary: Can not install in zone Description: Package tries to install files in /usr and fails when in zone. ====================================================================== From noreply at opencsw.org Tue Oct 19 13:34:35 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Oct 2010 13:34:35 +0200 Subject: [bug-notifications] [ap2_worker 0004580]: update does not restart in worker Message-ID: <8c80d4258c5651472d07c2406c788dac@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4580 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: ap2_worker Issue ID: 4580 Category: packaging Reproducibility: sometimes Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-19 13:34 CEST Last Modified: 2010-10-19 13:34 CEST ====================================================================== Summary: update does not restart in worker Description: Updating the previous install running httpd.worker restarts prefork not worker. ====================================================================== From noreply at opencsw.org Tue Oct 19 13:37:40 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Oct 2010 13:37:40 +0200 Subject: [bug-notifications] [apache2c 0004581]: ln "cannot create" link seen install Message-ID: <8a2b7f58b7f01dadc0d34eb2dec41195@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4581 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2c Issue ID: 4581 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-19 13:37 CEST Last Modified: 2010-10-19 13:37 CEST ====================================================================== Summary: ln "cannot create" link seen install Description: This might not matter (but how would I know?) and should be handled so it doesn't worry me: Installing class ... WARNING! FMRI path contained an illegal dot (removed) New FMRI path: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create /var/opt/csw/svc/method/svc-cswapache2: File exists ====================================================================== From noreply at opencsw.org Tue Oct 19 13:43:51 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Oct 2010 13:43:51 +0200 Subject: [bug-notifications] [ap2_worker 0004580]: update does not restart in worker In-Reply-To: <9990dbf574792fb4c29f4f0ad111da79> Message-ID: <50cfcf0e109c268923db431623e65c0f@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4580 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: ap2_worker Issue ID: 4580 Category: packaging Reproducibility: sometimes Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-19 13:34 CEST Last Modified: 2010-10-19 13:43 CEST ====================================================================== Summary: update does not restart in worker Description: Updating the previous install running httpd.worker restarts prefork not worker. ====================================================================== ---------------------------------------------------------------------- (0008381) james (developer) - 2010-10-19 13:43 https://www.opencsw.org/mantis/view.php?id=4580#c8381 ---------------------------------------------------------------------- This bit from install could be related: ## Installing part 1 of 1. /opt/csw/apache2/sbin/httpd.worker /opt/csw/share/doc/ap2_worker/license [ verifying class ] Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.worker ... ERROR: /opt/csw/apache2/sbin/httpd exists, and is not symlink. Not installing /opt/csw/apache2/sbin/httpd.worker as /opt/csw/apache2/sbin/httpd [ verifying class ] From noreply at opencsw.org Tue Oct 19 13:52:14 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Oct 2010 13:52:14 +0200 Subject: [bug-notifications] [xterm 0004582]: Please upgrade to 264 Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4582 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: xterm Issue ID: 4582 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-19 13:52 CEST Last Modified: 2010-10-19 13:52 CEST ====================================================================== Summary: Please upgrade to 264 Description: Please upgrade to 264 as released by SFW today ====================================================================== From noreply at opencsw.org Wed Oct 20 00:00:27 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 20 Oct 2010 00:00:27 +0200 Subject: [bug-notifications] [openldap 0004521]: openldaprc file is missing, slapd.conf not found by service start method In-Reply-To: <1423014f13e8c4d26c47fd2a1b7dfee3> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4521 ====================================================================== Reported By: dorix Assigned To: ====================================================================== Project: openldap Issue ID: 4521 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-08-13 22:43 CEST Last Modified: 2010-10-20 00:00 CEST ====================================================================== Summary: openldaprc file is missing, slapd.conf not found by service start method Description: A fresh install of CSWopenldap 2.4.22,REV=2010.06.08 on a new zone immediately comes up in maintenance state. The service start method looks for the non-existent openldaprc file in /etc/opt/csw and /opt/csw/etc, fails to find it, and tries to fall back on the now-incorrect default location for slapd.conf and slapd.d: /opt/csw/etc/openldap/slapd.conf and /opt/csw/etc/openldap/slapd.d. Comments in /var/opt/csw/svc/method/svc-cswopenldap say to copy the openldaprc template file from /opt/csw/share/doc/openldap to /etc/opt/csw, but there is no openldaprc template file in /opt/csw/share/doc/openldap. ====================================================================== ---------------------------------------------------------------------- (0008382) gadavis (developer) - 2010-10-20 00:00 https://www.opencsw.org/mantis/view.php?id=4521#c8382 ---------------------------------------------------------------------- +1 for a fix, this was a frustrating bug to stumble upon. From noreply at opencsw.org Wed Oct 20 12:33:33 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 20 Oct 2010 12:33:33 +0200 Subject: [bug-notifications] [coreutils 0004583]: Please upgrade to 8.6 Message-ID: <9a30e1fb0b3f76c80ab375981766feff@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4583 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: coreutils Issue ID: 4583 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-20 12:33 CEST Last Modified: 2010-10-20 12:33 CEST ====================================================================== Summary: Please upgrade to 8.6 Description: Please upgrade to 8.6 as released by SFW today ====================================================================== From noreply at opencsw.org Wed Oct 20 14:28:35 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 20 Oct 2010 14:28:35 +0200 Subject: [bug-notifications] [socat 0004509]: Please upgrade to 1.7.1.3 In-Reply-To: <406b569cf204fd9dfe848a22ade06f36> Message-ID: <37d69cba718387b8c4368bd45aa8074c@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4509 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: socat Issue ID: 4509 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-08-02 13:38 CEST Last Modified: 2010-10-20 14:28 CEST ====================================================================== Summary: Please upgrade to 1.7.1.3 Description: Please upgrade to 1.7.1.3 as released today on SFW ====================================================================== ---------------------------------------------------------------------- (0008383) dam (administrator) - 2010-10-20 14:28 https://www.opencsw.org/mantis/view.php?id=4509#c8383 ---------------------------------------------------------------------- PING... This is a security fix :-) From noreply at opencsw.org Thu Oct 21 14:03:25 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Oct 2010 14:03:25 +0200 Subject: [bug-notifications] [gar_devel 0004584]: Missing dependencies to various py-* packages Message-ID: <6e0c83b169460494ec2b5feb6cdd9d83@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4584 ====================================================================== Reported By: cwalther Assigned To: ====================================================================== Project: gar_devel Issue ID: 4584 Category: packaging Reproducibility: always Severity: trivial Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-21 14:03 CEST Last Modified: 2010-10-21 14:03 CEST ====================================================================== Summary: Missing dependencies to various py-* packages Description: After installing gar_devel the following packages are reported as missing: ==> Verifying installed package CSWxz: MISSING ==> Verifying installed package CSWgfile: MISSING ==> Verifying installed package CSWpy-hachoir-core: MISSING ==> Verifying installed package CSWpy-hachoir-parser: MISSING ==> Verifying installed package CSWpy-libmagic: MISSING ==> Verifying installed package CSWpy-progressbar: MISSING ==> Verifying installed package CSWpy-sqlobject: MISSING ==> Verifying installed package CSWpy-yaml: MISSING ====================================================================== From noreply at opencsw.org Thu Oct 21 14:41:34 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Oct 2010 14:41:34 +0200 Subject: [bug-notifications] [gar_devel 0004584]: Missing dependencies to various py-* packages In-Reply-To: <2a98f59d554b5a7d38d5150b50e76615> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4584 ====================================================================== Reported By: cwalther Assigned To: ====================================================================== Project: gar_devel Issue ID: 4584 Category: packaging Reproducibility: always Severity: trivial Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-21 14:03 CEST Last Modified: 2010-10-21 14:41 CEST ====================================================================== Summary: Missing dependencies to various py-* packages Description: After installing gar_devel the following packages are reported as missing: ==> Verifying installed package CSWxz: MISSING ==> Verifying installed package CSWgfile: MISSING ==> Verifying installed package CSWpy-hachoir-core: MISSING ==> Verifying installed package CSWpy-hachoir-parser: MISSING ==> Verifying installed package CSWpy-libmagic: MISSING ==> Verifying installed package CSWpy-progressbar: MISSING ==> Verifying installed package CSWpy-sqlobject: MISSING ==> Verifying installed package CSWpy-yaml: MISSING ====================================================================== ---------------------------------------------------------------------- (0008384) bwalton (manager) - 2010-10-21 14:41 https://www.opencsw.org/mantis/view.php?id=4584#c8384 ---------------------------------------------------------------------- New package pushed to release manager with updated dependencies. From noreply at opencsw.org Sat Oct 23 15:31:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:31:39 +0200 Subject: [bug-notifications] [lighttpd 0002970]: missing out on solaris specific tunable In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2970 ====================================================================== Reported By: philadmin Assigned To: ====================================================================== Project: lighttpd Issue ID: 2970 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2008-12-16 21:34 CET Last Modified: 2010-10-23 15:31 CEST ====================================================================== Summary: missing out on solaris specific tunable Description: according to http://blogs.sun.com/shanti/entry/lighttpd_on_solaris it is important to set server.event-handler to "solaris-devpoll" to have better performance ====================================================================== ---------------------------------------------------------------------- (0008385) drio (manager) - 2010-10-23 15:31 https://www.opencsw.org/mantis/view.php?id=2970#c8385 ---------------------------------------------------------------------- Added dev-poll in config From noreply at opencsw.org Sat Oct 23 15:34:18 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:34:18 +0200 Subject: [bug-notifications] [lighttpd 0004574]: LIB path to libgcc_s.so.1 pointing to incorrect location In-Reply-To: <04db307ce05b780692be4487427f049a> Message-ID: <6475b983d9334f65852023c45675386d@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4574 ====================================================================== Reported By: atmphil Assigned To: ====================================================================== Project: lighttpd Issue ID: 4574 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-07 20:07 CEST Last Modified: 2010-10-23 15:34 CEST ====================================================================== Summary: LIB path to libgcc_s.so.1 pointing to incorrect location Description: Can not find lib PATH to libgcc_s.so.1 File installed with CSWgcc4corert though dependency CSWgcc4g++rt workaround: unconfigure mod_indexfile.so or put /opt/csw/gcc4/lib in LIB path crle -l /usr/lib:/lib:/opt/csw/gcc4/lib ====================================================================== From noreply at opencsw.org Sat Oct 23 15:36:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:36:39 +0200 Subject: [bug-notifications] [lighttpd 0002993]: Please depend against CSWpcrert instead of CSWpcre In-Reply-To: <0e70727faaa85a47f96b2d884877a552> Message-ID: <43ee43b98099b11d71f6d24aee9ae54f@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2993 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: lighttpd Issue ID: 2993 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-01-15 16:20 CET Last Modified: 2010-10-23 15:36 CEST ====================================================================== Summary: Please depend against CSWpcrert instead of CSWpcre Description: Please depend against CSWpcrert instead of CSWpcre ====================================================================== ---------------------------------------------------------------------- (0008386) drio (manager) - 2010-10-23 15:36 https://www.opencsw.org/mantis/view.php?id=2993#c8386 ---------------------------------------------------------------------- Done. From noreply at opencsw.org Sat Oct 23 15:38:00 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:38:00 +0200 Subject: [bug-notifications] [lighttpd 0003797]: mod_compress.so has no RPATH to libbz2 In-Reply-To: <978d74f97d26737e3fb77cc947762b9a> Message-ID: <5a2a91b4f3ae3ce62ce3680df4fdd67d@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3797 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: lighttpd Issue ID: 3797 Category: regular use Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2009-07-30 17:52 CEST Last Modified: 2010-10-23 15:38 CEST ====================================================================== Summary: mod_compress.so has no RPATH to libbz2 Description: /opt/csw/lib/mod_compress.so has no RPATH, I can't be sure but it might not be picking up the libs. It certainly fails ldd checks and picks a non-CSW zlib. ====================================================================== ---------------------------------------------------------------------- (0008387) drio (manager) - 2010-10-23 15:38 https://www.opencsw.org/mantis/view.php?id=3797#c8387 ---------------------------------------------------------------------- Can someone confirm this with the latest build? From noreply at opencsw.org Sat Oct 23 15:38:39 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:38:39 +0200 Subject: [bug-notifications] [lighttpd 0003934]: Please upgrade to 1.4.22 In-Reply-To: <9eedf8b6c9755c0d2008d25c11a44827> Message-ID: <96e9656549bcc946a45759f726080896@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3934 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: lighttpd Issue ID: 3934 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-10-04 23:20 CEST Last Modified: 2010-10-23 15:38 CEST ====================================================================== Summary: Please upgrade to 1.4.22 Description: Please upgrade to 1.4.22 ====================================================================== From noreply at opencsw.org Sat Oct 23 15:39:14 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:39:14 +0200 Subject: [bug-notifications] [lighttpd 0004531]: Please upgrade to 1.4.28 In-Reply-To: Message-ID: <3b7dd6d285078ba4da48451486982a9f@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4531 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: lighttpd Issue ID: 4531 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-08-27 12:44 CEST Last Modified: 2010-10-23 15:39 CEST ====================================================================== Summary: Please upgrade to 1.4.28 Description: Please upgrade to 1.4.28 ====================================================================== From noreply at opencsw.org Sat Oct 23 15:40:19 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:40:19 +0200 Subject: [bug-notifications] [lighttpd 0002970]: missing out on solaris specific tunable In-Reply-To: Message-ID: <2a9e2ebd510737e7cdf71b4d915e7d69@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2970 ====================================================================== Reported By: philadmin Assigned To: ====================================================================== Project: lighttpd Issue ID: 2970 Category: packaging Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2008-12-16 21:34 CET Last Modified: 2010-10-23 15:40 CEST ====================================================================== Summary: missing out on solaris specific tunable Description: according to http://blogs.sun.com/shanti/entry/lighttpd_on_solaris it is important to set server.event-handler to "solaris-devpoll" to have better performance ====================================================================== ---------------------------------------------------------------------- (0008385) drio (manager) - 2010-10-23 15:31 https://www.opencsw.org/mantis/view.php?id=2970#c8385 ---------------------------------------------------------------------- Added dev-poll in config From noreply at opencsw.org Sat Oct 23 15:50:25 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 23 Oct 2010 15:50:25 +0200 Subject: [bug-notifications] [lighttpd 0004574]: LIB path to libgcc_s.so.1 pointing to incorrect location In-Reply-To: <04db307ce05b780692be4487427f049a> Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4574 ====================================================================== Reported By: atmphil Assigned To: ====================================================================== Project: lighttpd Issue ID: 4574 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-10-07 20:07 CEST Last Modified: 2010-10-23 15:50 CEST ====================================================================== Summary: LIB path to libgcc_s.so.1 pointing to incorrect location Description: Can not find lib PATH to libgcc_s.so.1 File installed with CSWgcc4corert though dependency CSWgcc4g++rt workaround: unconfigure mod_indexfile.so or put /opt/csw/gcc4/lib in LIB path crle -l /usr/lib:/lib:/opt/csw/gcc4/lib ====================================================================== ---------------------------------------------------------------------- (0008388) drio (manager) - 2010-10-23 15:50 https://www.opencsw.org/mantis/view.php?id=4574#c8388 ---------------------------------------------------------------------- Added crle in postinstall script. I'll leave it open, I want to get feedback about it. From noreply at opencsw.org Sun Oct 24 11:21:19 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:21:19 +0200 Subject: [bug-notifications] [proftpd 0001606]: init.d script In-Reply-To: <36036a77db2e71130887bc00a00a4238> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1606 ====================================================================== Reported By: yann Assigned To: ====================================================================== Project: proftpd Issue ID: 1606 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: new ====================================================================== Date Submitted: 2006-05-20 14:44 CEST Last Modified: 2010-10-24 11:21 CEST ====================================================================== Summary: init.d script Description: proftpd can be launched in inetd mode or standalone mode. Would be nice if the package could provide an init.d script. Maybe some info about this inetd/standalone mode in a /opt/csw/share/doc/proftpd/README.CSW would be nice. ====================================================================== ---------------------------------------------------------------------- (0008389) ai (manager) - 2010-10-24 11:21 https://www.opencsw.org/mantis/view.php?id=1606#c8389 ---------------------------------------------------------------------- fixed in 1,3,3b From noreply at opencsw.org Sun Oct 24 11:22:27 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:22:27 +0200 Subject: [bug-notifications] [proftpd 0001606]: init.d script In-Reply-To: <36036a77db2e71130887bc00a00a4238> Message-ID: <5dbab0086b26a2c32b10b88ddef0eb5c@www.opencsw.org> The following issue has been UPDATED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1606 ====================================================================== Reported By: yann Assigned To: ====================================================================== Project: proftpd Issue ID: 1606 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: new ====================================================================== Date Submitted: 2006-05-20 14:44 CEST Last Modified: 2010-10-24 11:22 CEST ====================================================================== Summary: init.d script Description: proftpd can be launched in inetd mode or standalone mode. Would be nice if the package could provide an init.d script. Maybe some info about this inetd/standalone mode in a /opt/csw/share/doc/proftpd/README.CSW would be nice. ====================================================================== ---------------------------------------------------------------------- (0008390) ai (manager) - 2010-10-24 11:22 https://www.opencsw.org/mantis/view.php?id=1606#c8390 ---------------------------------------------------------------------- fixed in 1.3.3b From noreply at opencsw.org Sun Oct 24 11:24:12 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:24:12 +0200 Subject: [bug-notifications] [proftpd 0001606]: init.d script In-Reply-To: <36036a77db2e71130887bc00a00a4238> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1606 ====================================================================== Reported By: yann Assigned To: ====================================================================== Project: proftpd Issue ID: 1606 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: resolved Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2006-05-20 14:44 CEST Last Modified: 2010-10-24 11:24 CEST ====================================================================== Summary: init.d script Description: proftpd can be launched in inetd mode or standalone mode. Would be nice if the package could provide an init.d script. Maybe some info about this inetd/standalone mode in a /opt/csw/share/doc/proftpd/README.CSW would be nice. ====================================================================== ---------------------------------------------------------------------- (0008390) ai (manager) - 2010-10-24 11:22 https://www.opencsw.org/mantis/view.php?id=1606#c8390 ---------------------------------------------------------------------- fixed in 1.3.3b From noreply at opencsw.org Sun Oct 24 11:24:52 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:24:52 +0200 Subject: [bug-notifications] [proftpd 0001606]: init.d script In-Reply-To: <36036a77db2e71130887bc00a00a4238> Message-ID: <3058a535a6c395d5eca8f75c808b60ff@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1606 ====================================================================== Reported By: yann Assigned To: ====================================================================== Project: proftpd Issue ID: 1606 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2006-05-20 14:44 CEST Last Modified: 2010-10-24 11:24 CEST ====================================================================== Summary: init.d script Description: proftpd can be launched in inetd mode or standalone mode. Would be nice if the package could provide an init.d script. Maybe some info about this inetd/standalone mode in a /opt/csw/share/doc/proftpd/README.CSW would be nice. ====================================================================== ---------------------------------------------------------------------- (0008390) ai (manager) - 2010-10-24 11:22 https://www.opencsw.org/mantis/view.php?id=1606#c8390 ---------------------------------------------------------------------- fixed in 1.3.3b From noreply at opencsw.org Sun Oct 24 11:28:41 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:28:41 +0200 Subject: [bug-notifications] [proftpd 0004034]: Please upgrade to 1.3.2 In-Reply-To: <9116b4693997d3aa0dfc53eeec09d465> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4034 ====================================================================== Reported By: dam Assigned To: ai ====================================================================== Project: proftpd Issue ID: 4034 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-11-13 13:21 CET Last Modified: 2010-10-24 11:28 CEST ====================================================================== Summary: Please upgrade to 1.3.2 Description: Please upgrade to 1.3.2 ====================================================================== ---------------------------------------------------------------------- (0008391) ai (manager) - 2010-10-24 11:28 https://www.opencsw.org/mantis/view.php?id=4034#c8391 ---------------------------------------------------------------------- 1.3.3b From noreply at opencsw.org Sun Oct 24 11:28:58 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:28:58 +0200 Subject: [bug-notifications] [proftpd 0004034]: Please upgrade to 1.3.2 In-Reply-To: <9116b4693997d3aa0dfc53eeec09d465> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4034 ====================================================================== Reported By: dam Assigned To: ai ====================================================================== Project: proftpd Issue ID: 4034 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-11-13 13:21 CET Last Modified: 2010-10-24 11:28 CEST ====================================================================== Summary: Please upgrade to 1.3.2 Description: Please upgrade to 1.3.2 ====================================================================== ---------------------------------------------------------------------- (0008391) ai (manager) - 2010-10-24 11:28 https://www.opencsw.org/mantis/view.php?id=4034#c8391 ---------------------------------------------------------------------- 1.3.3b From noreply at opencsw.org Sun Oct 24 11:29:51 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:29:51 +0200 Subject: [bug-notifications] [proftpd 0004161]: Please upgrade to 1.3.2c In-Reply-To: <8c1d757a085d8869eeb8baf05cf12ee3> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4161 ====================================================================== Reported By: dam Assigned To: ai ====================================================================== Project: proftpd Issue ID: 4161 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-01-16 11:38 CET Last Modified: 2010-10-24 11:29 CEST ====================================================================== Summary: Please upgrade to 1.3.2c Description: Please upgrade to 1.3.2c ====================================================================== ---------------------------------------------------------------------- (0008392) ai (manager) - 2010-10-24 11:29 https://www.opencsw.org/mantis/view.php?id=4161#c8392 ---------------------------------------------------------------------- 1.3.3b From noreply at opencsw.org Sun Oct 24 11:30:10 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:30:10 +0200 Subject: [bug-notifications] [proftpd 0004161]: Please upgrade to 1.3.2c In-Reply-To: <8c1d757a085d8869eeb8baf05cf12ee3> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4161 ====================================================================== Reported By: dam Assigned To: ai ====================================================================== Project: proftpd Issue ID: 4161 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-01-16 11:38 CET Last Modified: 2010-10-24 11:30 CEST ====================================================================== Summary: Please upgrade to 1.3.2c Description: Please upgrade to 1.3.2c ====================================================================== ---------------------------------------------------------------------- (0008392) ai (manager) - 2010-10-24 11:29 https://www.opencsw.org/mantis/view.php?id=4161#c8392 ---------------------------------------------------------------------- 1.3.3b From noreply at opencsw.org Sun Oct 24 11:32:45 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:32:45 +0200 Subject: [bug-notifications] [proftpd 0002381]: openssl dependancy deprecated: please use openssl_rt instead In-Reply-To: Message-ID: <2571cb8ab9e6fa033e5d92295ded1d3a@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2381 ====================================================================== Reported By: yann Assigned To: ai ====================================================================== Project: proftpd Issue ID: 2381 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-07-28 08:41 CEST Last Modified: 2010-10-24 11:32 CEST ====================================================================== Summary: openssl dependancy deprecated: please use openssl_rt instead Description: Following the openssl package split, the ssl libraries are now directly provided by the openssl_rt package. The openssl package still exists, it\'s a metapackage which will install openssl_rt, openssl_devel and openssl_utils which contains respectively the ssl libraries, the development files and the openssl utilities. Your package probably only use the ssl libraries, so to avoid installing unnecessary dependancies, please update your package to depend on openssl_rt rather than openssl. ====================================================================== ---------------------------------------------------------------------- (0008393) ai (manager) - 2010-10-24 11:32 https://www.opencsw.org/mantis/view.php?id=2381#c8393 ---------------------------------------------------------------------- fixed in 1.3.3b From noreply at opencsw.org Sun Oct 24 11:33:12 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:33:12 +0200 Subject: [bug-notifications] [proftpd 0002381]: openssl dependancy deprecated: please use openssl_rt instead In-Reply-To: Message-ID: <64bd172ba8c92ccc0a6094f987592d24@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2381 ====================================================================== Reported By: yann Assigned To: ai ====================================================================== Project: proftpd Issue ID: 2381 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-07-28 08:41 CEST Last Modified: 2010-10-24 11:33 CEST ====================================================================== Summary: openssl dependancy deprecated: please use openssl_rt instead Description: Following the openssl package split, the ssl libraries are now directly provided by the openssl_rt package. The openssl package still exists, it\'s a metapackage which will install openssl_rt, openssl_devel and openssl_utils which contains respectively the ssl libraries, the development files and the openssl utilities. Your package probably only use the ssl libraries, so to avoid installing unnecessary dependancies, please update your package to depend on openssl_rt rather than openssl. ====================================================================== ---------------------------------------------------------------------- (0008393) ai (manager) - 2010-10-24 11:32 https://www.opencsw.org/mantis/view.php?id=2381#c8393 ---------------------------------------------------------------------- fixed in 1.3.3b From noreply at opencsw.org Sun Oct 24 11:35:03 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:35:03 +0200 Subject: [bug-notifications] [proftpd 0001946]: CVE-2006-5815: remote code execution in ProFTPD In-Reply-To: Message-ID: <7e6b10bfd5def2e7f3eb290674b81ee4@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1946 ====================================================================== Reported By: blindpassenger Assigned To: ai ====================================================================== Project: proftpd Issue ID: 1946 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2006-11-28 05:47 CET Last Modified: 2010-10-24 11:35 CEST ====================================================================== Summary: CVE-2006-5815: remote code execution in ProFTPD Description: Copied from www.proftpd.org: On 6 November 2006, Evgeny Legerov <admin at gleg.net> posted to BUGTRAQ[1], announcing his commercial VulnDisco Pack for Metasploit 2.7[2]. One of the included exploits, vd_proftpd.pm, takes advantage of an off-by-one string manipulation flaw in ProFTPD\'s sreplace() function to allow a remote attacker to execute arbitrary code. This vulnerabillity, identified as CVE-2006-5815[3], is believed to affect all versions of ProFTPD up to and including 1.3.0, but exploitability has only been demonstrated with version 1.3.0rc3. The demonstrated exploit relies on write access via FTP for exploitability, but other attack vectors may make exploitation of a read-only FTP server possible. This vulnerability has been patched[4] in the latest release of ProFTPD, 1.3.0a, which is available from the ProFTPD web site, http://www.proftpd.org/. Mitigation techniques have also been developed for use until a patched version can be installed. ====================================================================== ---------------------------------------------------------------------- (0008394) ai (manager) - 2010-10-24 11:35 https://www.opencsw.org/mantis/view.php?id=1946#c8394 ---------------------------------------------------------------------- 1.3.3b From noreply at opencsw.org Sun Oct 24 11:35:41 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:35:41 +0200 Subject: [bug-notifications] [proftpd 0001946]: CVE-2006-5815: remote code execution in ProFTPD In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1946 ====================================================================== Reported By: blindpassenger Assigned To: ai ====================================================================== Project: proftpd Issue ID: 1946 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2006-11-28 05:47 CET Last Modified: 2010-10-24 11:35 CEST ====================================================================== Summary: CVE-2006-5815: remote code execution in ProFTPD Description: Copied from www.proftpd.org: On 6 November 2006, Evgeny Legerov <admin at gleg.net> posted to BUGTRAQ[1], announcing his commercial VulnDisco Pack for Metasploit 2.7[2]. One of the included exploits, vd_proftpd.pm, takes advantage of an off-by-one string manipulation flaw in ProFTPD\'s sreplace() function to allow a remote attacker to execute arbitrary code. This vulnerabillity, identified as CVE-2006-5815[3], is believed to affect all versions of ProFTPD up to and including 1.3.0, but exploitability has only been demonstrated with version 1.3.0rc3. The demonstrated exploit relies on write access via FTP for exploitability, but other attack vectors may make exploitation of a read-only FTP server possible. This vulnerability has been patched[4] in the latest release of ProFTPD, 1.3.0a, which is available from the ProFTPD web site, http://www.proftpd.org/. Mitigation techniques have also been developed for use until a patched version can be installed. ====================================================================== ---------------------------------------------------------------------- (0008394) ai (manager) - 2010-10-24 11:35 https://www.opencsw.org/mantis/view.php?id=1946#c8394 ---------------------------------------------------------------------- 1.3.3b From noreply at opencsw.org Sun Oct 24 11:40:33 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:40:33 +0200 Subject: [bug-notifications] [proftpd 0002178]: TCPWrappers and ProFTPd In-Reply-To: <9f70eca5c35348ebb3572db7f8ffe800> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2178 ====================================================================== Reported By: lburgess Assigned To: ai ====================================================================== Project: proftpd Issue ID: 2178 Category: packaging Reproducibility: N/A Severity: feature Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-03-22 11:00 CET Last Modified: 2010-10-24 11:40 CEST ====================================================================== Summary: TCPWrappers and ProFTPd Description: blastwave shows that proftpd has a dependency on tcpwrappers, but I don\'t see mod_wrap as one of the compiled modules. I\'m probably missing how tcpwrappers is built-in. Can you help? ====================================================================== ---------------------------------------------------------------------- (0008395) ai (manager) - 2010-10-24 11:40 https://www.opencsw.org/mantis/view.php?id=2178#c8395 ---------------------------------------------------------------------- 1.3.3b mod_wrap2.c mod_wrap2_file.c From noreply at opencsw.org Sun Oct 24 11:40:52 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:40:52 +0200 Subject: [bug-notifications] [proftpd 0002178]: TCPWrappers and ProFTPd In-Reply-To: <9f70eca5c35348ebb3572db7f8ffe800> Message-ID: <54a8aa8a7c33b88767ccf24affd3a645@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2178 ====================================================================== Reported By: lburgess Assigned To: ai ====================================================================== Project: proftpd Issue ID: 2178 Category: packaging Reproducibility: N/A Severity: feature Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-03-22 11:00 CET Last Modified: 2010-10-24 11:40 CEST ====================================================================== Summary: TCPWrappers and ProFTPd Description: blastwave shows that proftpd has a dependency on tcpwrappers, but I don\'t see mod_wrap as one of the compiled modules. I\'m probably missing how tcpwrappers is built-in. Can you help? ====================================================================== ---------------------------------------------------------------------- (0008395) ai (manager) - 2010-10-24 11:40 https://www.opencsw.org/mantis/view.php?id=2178#c8395 ---------------------------------------------------------------------- 1.3.3b mod_wrap2.c mod_wrap2_file.c From noreply at opencsw.org Sun Oct 24 11:44:43 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:44:43 +0200 Subject: [bug-notifications] [proftpd 0002642]: Missing features In-Reply-To: Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2642 ====================================================================== Reported By: gpersico Assigned To: ai ====================================================================== Project: proftpd Issue ID: 2642 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-10-25 09:48 CEST Last Modified: 2010-10-24 11:44 CEST ====================================================================== Summary: Missing features Description: The LDAPUseTLS is not enabled. The LDAPHomedirOnDemandPrefix is not enabled. The LDAPHomedirOnDemand is not enabled. The LDAPForceHomeDironDemand is not enabled. ====================================================================== ---------------------------------------------------------------------- (0008396) ai (manager) - 2010-10-24 11:44 https://www.opencsw.org/mantis/view.php?id=2642#c8396 ---------------------------------------------------------------------- in current 1.3.3b ldap support is not packaged. From noreply at opencsw.org Sun Oct 24 11:45:13 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:45:13 +0200 Subject: [bug-notifications] [proftpd 0002642]: Missing features In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2642 ====================================================================== Reported By: gpersico Assigned To: ai ====================================================================== Project: proftpd Issue ID: 2642 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-10-25 09:48 CEST Last Modified: 2010-10-24 11:45 CEST ====================================================================== Summary: Missing features Description: The LDAPUseTLS is not enabled. The LDAPHomedirOnDemandPrefix is not enabled. The LDAPHomedirOnDemand is not enabled. The LDAPForceHomeDironDemand is not enabled. ====================================================================== ---------------------------------------------------------------------- (0008396) ai (manager) - 2010-10-24 11:44 https://www.opencsw.org/mantis/view.php?id=2642#c8396 ---------------------------------------------------------------------- in current 1.3.3b ldap support is not packaged. From noreply at opencsw.org Sun Oct 24 11:48:01 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:48:01 +0200 Subject: [bug-notifications] [proftpd 0001605]: Dependancy on CSWoldap instead of CSWoldaprt In-Reply-To: <3967d61bd7c38b29e3c91cf7190a544a> Message-ID: <2878eb1248a1fde2769577019071781d@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1605 ====================================================================== Reported By: yann Assigned To: ai ====================================================================== Project: proftpd Issue ID: 1605 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2006-05-20 14:39 CEST Last Modified: 2010-10-24 11:48 CEST ====================================================================== Summary: Dependancy on CSWoldap instead of CSWoldaprt Description: proftpd depends on CSWoldap so it always installs the openldap server. Is it really necessary ? Shouldn\'it depend on CSWoldaprt ? ====================================================================== ---------------------------------------------------------------------- (0008397) ai (manager) - 2010-10-24 11:48 https://www.opencsw.org/mantis/view.php?id=1605#c8397 ---------------------------------------------------------------------- in current 1.3.3b ldap support is not packaged. From noreply at opencsw.org Sun Oct 24 11:48:17 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 11:48:17 +0200 Subject: [bug-notifications] [proftpd 0001605]: Dependancy on CSWoldap instead of CSWoldaprt In-Reply-To: <3967d61bd7c38b29e3c91cf7190a544a> Message-ID: <1f67f1d256f06ec5f1e17870324eba97@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1605 ====================================================================== Reported By: yann Assigned To: ai ====================================================================== Project: proftpd Issue ID: 1605 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2006-05-20 14:39 CEST Last Modified: 2010-10-24 11:48 CEST ====================================================================== Summary: Dependancy on CSWoldap instead of CSWoldaprt Description: proftpd depends on CSWoldap so it always installs the openldap server. Is it really necessary ? Shouldn\'it depend on CSWoldaprt ? ====================================================================== ---------------------------------------------------------------------- (0008397) ai (manager) - 2010-10-24 11:48 https://www.opencsw.org/mantis/view.php?id=1605#c8397 ---------------------------------------------------------------------- in current 1.3.3b ldap support is not packaged. From noreply at opencsw.org Sun Oct 24 21:53:28 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 21:53:28 +0200 Subject: [bug-notifications] [fetchmail 0004585]: Please upgrade to 6.3.18 Message-ID: <1cc0a1fac3497258142dccba1060d5d5@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4585 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: fetchmail Issue ID: 4585 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-24 21:53 CEST Last Modified: 2010-10-24 21:53 CEST ====================================================================== Summary: Please upgrade to 6.3.18 Description: Please upgrade to 6.3.18 as released by SFW today :-) ====================================================================== From noreply at opencsw.org Sun Oct 24 22:04:19 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 22:04:19 +0200 Subject: [bug-notifications] [shmux 0002988]: Please depend against CSWpcrert instead of CSWpcre In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2988 ====================================================================== Reported By: dam Assigned To: dam ====================================================================== Project: shmux Issue ID: 2988 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-01-15 16:17 CET Last Modified: 2010-10-24 22:04 CEST ====================================================================== Summary: Please depend against CSWpcrert instead of CSWpcre Description: Please depend against CSWpcrert instead of CSWpcre ====================================================================== From noreply at opencsw.org Sun Oct 24 22:04:38 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 22:04:38 +0200 Subject: [bug-notifications] [shmux 0002988]: Please depend against CSWpcrert instead of CSWpcre In-Reply-To: Message-ID: <9061464605cb99ffefbc992c685419ec@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2988 ====================================================================== Reported By: dam Assigned To: dam ====================================================================== Project: shmux Issue ID: 2988 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-01-15 16:17 CET Last Modified: 2010-10-24 22:04 CEST ====================================================================== Summary: Please depend against CSWpcrert instead of CSWpcre Description: Please depend against CSWpcrert instead of CSWpcre ====================================================================== ---------------------------------------------------------------------- (0008398) dam (administrator) - 2010-10-24 22:04 https://www.opencsw.org/mantis/view.php?id=2988#c8398 ---------------------------------------------------------------------- Fixed in 1.0.2,REV=2010.10.18 and released to current/. From noreply at opencsw.org Sun Oct 24 22:11:16 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 22:11:16 +0200 Subject: [bug-notifications] [rapidsvn 0004072]: Rebuild rapidsvn against wxwidgets-2.8.10 In-Reply-To: <9493547d0fdb82229cbd1926766c2359> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4072 ====================================================================== Reported By: maciej Assigned To: dam ====================================================================== Project: rapidsvn Issue ID: 4072 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-12-08 20:01 CET Last Modified: 2010-10-24 22:11 CEST ====================================================================== Summary: Rebuild rapidsvn against wxwidgets-2.8.10 Description: A new, garified version of wxwidgets has been released. The new package provides the old binaries for backward compatibility. Please rebuild the package against the new version of wxwidgets, so that the old binaries can be removed. ====================================================================== From noreply at opencsw.org Sun Oct 24 22:11:33 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Oct 2010 22:11:33 +0200 Subject: [bug-notifications] [rapidsvn 0004072]: Rebuild rapidsvn against wxwidgets-2.8.10 In-Reply-To: <9493547d0fdb82229cbd1926766c2359> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4072 ====================================================================== Reported By: maciej Assigned To: dam ====================================================================== Project: rapidsvn Issue ID: 4072 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-12-08 20:01 CET Last Modified: 2010-10-24 22:11 CEST ====================================================================== Summary: Rebuild rapidsvn against wxwidgets-2.8.10 Description: A new, garified version of wxwidgets has been released. The new package provides the old binaries for backward compatibility. Please rebuild the package against the new version of wxwidgets, so that the old binaries can be removed. ====================================================================== ---------------------------------------------------------------------- (0008399) dam (administrator) - 2010-10-24 22:11 https://www.opencsw.org/mantis/view.php?id=4072#c8399 ---------------------------------------------------------------------- Fixed in 0.12.0.1,REV=2010.10.20 and released to current/. From noreply at opencsw.org Mon Oct 25 12:32:06 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 25 Oct 2010 12:32:06 +0200 Subject: [bug-notifications] [gtar 0004586]: Please upgrade to 1.24 Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4586 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: gtar Issue ID: 4586 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-25 12:32 CEST Last Modified: 2010-10-25 12:32 CEST ====================================================================== Summary: Please upgrade to 1.24 Description: Please upgrade to 1.24 as released by SFW today ====================================================================== From noreply at opencsw.org Mon Oct 25 21:40:27 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 25 Oct 2010 21:40:27 +0200 Subject: [bug-notifications] [jhead 0004587]: Please upgrade to 2.90 Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4587 ====================================================================== Reported By: opk Assigned To: ====================================================================== Project: jhead Issue ID: 4587 Category: packaging Reproducibility: have not tried Severity: minor Priority: low Status: new ====================================================================== Date Submitted: 2010-10-25 21:40 CEST Last Modified: 2010-10-25 21:40 CEST ====================================================================== Summary: Please upgrade to 2.90 Description: Please upgrade to 2.90 ====================================================================== From noreply at opencsw.org Tue Oct 26 03:09:45 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 03:09:45 +0200 Subject: [bug-notifications] [apache2 0003953]: Please upgrade to 2.2.14 In-Reply-To: Message-ID: <4ae109166f4359b1b05d2017be903741@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3953 ====================================================================== Reported By: dam Assigned To: ihsan ====================================================================== Project: apache2 Issue ID: 3953 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-10-09 10:51 CEST Last Modified: 2010-10-26 03:09 CEST ====================================================================== Summary: Please upgrade to 2.2.14 Description: Please upgrade to 2.2.14 while you're at it :-) ====================================================================== ---------------------------------------------------------------------- (0008400) bwalton (manager) - 2010-10-26 03:09 https://www.opencsw.org/mantis/view.php?id=3953#c8400 ---------------------------------------------------------------------- 2.2.16 released (warts and all) From noreply at opencsw.org Tue Oct 26 03:11:45 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 03:11:45 +0200 Subject: [bug-notifications] [apache2 0003773]: svc method script does not use config file variable In-Reply-To: <89ce5efba8bdd5ca964c859d537c83b3> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3773 ====================================================================== Reported By: rogdavies Assigned To: ====================================================================== Project: apache2 Issue ID: 3773 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-07-22 10:24 CEST Last Modified: 2010-10-26 03:11 CEST ====================================================================== Summary: svc method script does not use config file variable Description: The method script cswapache2, does not use the CONF_FILE variable to start apache. The 'cmd' variable require something like cmd="$cmd -f $CONF_FILE" set in 'start' and 'restart' ( I think ) ====================================================================== ---------------------------------------------------------------------- (0008401) bwalton (manager) - 2010-10-26 03:11 https://www.opencsw.org/mantis/view.php?id=3773#c8401 ---------------------------------------------------------------------- Please file a new issue if this still affects the 2.2.16 release. From noreply at opencsw.org Tue Oct 26 03:18:37 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 03:18:37 +0200 Subject: [bug-notifications] [apache2 0004388]: Request for dtrace module for Apache2 In-Reply-To: <3d6470480ad295872525966601bd2246> Message-ID: <1d006630f7abc068ea59858eb4feb548@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4388 ====================================================================== Reported By: conandor Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 4388 Category: other Reproducibility: N/A Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-04-02 10:41 CEST Last Modified: 2010-10-26 03:18 CEST ====================================================================== Summary: Request for dtrace module for Apache2 Description: I'm told to request new modules at here. ====================================================================== ---------------------------------------------------------------------- (0008403) bwalton (manager) - 2010-10-26 03:18 https://www.opencsw.org/mantis/view.php?id=4388#c8403 ---------------------------------------------------------------------- Is this module still required? From noreply at opencsw.org Tue Oct 26 03:25:23 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 03:25:23 +0200 Subject: [bug-notifications] [apache2 0004388]: Request for dtrace module for Apache2 In-Reply-To: <3d6470480ad295872525966601bd2246> Message-ID: <29300a2bbaed4d1b83c97b0740270417@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4388 ====================================================================== Reported By: conandor Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 4388 Category: other Reproducibility: N/A Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-04-02 10:41 CEST Last Modified: 2010-10-26 03:25 CEST ====================================================================== Summary: Request for dtrace module for Apache2 Description: I'm told to request new modules at here. ====================================================================== ---------------------------------------------------------------------- (0008405) conandor (reporter) - 2010-10-26 03:25 https://www.opencsw.org/mantis/view.php?id=4388#c8405 ---------------------------------------------------------------------- not anymore, as I change to use Sun Web Stack which contain the module. Thank you. From noreply at opencsw.org Tue Oct 26 03:29:11 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 03:29:11 +0200 Subject: [bug-notifications] [apache2 0004388]: Request for dtrace module for Apache2 In-Reply-To: <3d6470480ad295872525966601bd2246> Message-ID: <574304606d981f98f5cf6e8bb715d580@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4388 ====================================================================== Reported By: conandor Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 4388 Category: other Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-04-02 10:41 CEST Last Modified: 2010-10-26 03:29 CEST ====================================================================== Summary: Request for dtrace module for Apache2 Description: I'm told to request new modules at here. ====================================================================== ---------------------------------------------------------------------- (0008405) conandor (reporter) - 2010-10-26 03:25 https://www.opencsw.org/mantis/view.php?id=4388#c8405 ---------------------------------------------------------------------- not anymore, as I change to use Sun Web Stack which contain the module. Thank you. From noreply at opencsw.org Tue Oct 26 03:33:40 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 03:33:40 +0200 Subject: [bug-notifications] [gtar 0004586]: Please upgrade to 1.24 In-Reply-To: <69bb2f4d09eb9510994e32d52a4f797d> Message-ID: <8e3b839ddc139f9dbdaccda6543fe7cc@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4586 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: gtar Issue ID: 4586 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-10-25 12:32 CEST Last Modified: 2010-10-26 03:33 CEST ====================================================================== Summary: Please upgrade to 1.24 Description: Please upgrade to 1.24 as released by SFW today ====================================================================== ---------------------------------------------------------------------- (0008406) bwalton (manager) - 2010-10-26 03:33 https://www.opencsw.org/mantis/view.php?id=4586#c8406 ---------------------------------------------------------------------- Updated packages pushed to release. From noreply at opencsw.org Tue Oct 26 03:51:40 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 03:51:40 +0200 Subject: [bug-notifications] [apache2c 0004320]: Split off an apache2 utilities package for tools like "ab" In-Reply-To: <09b03af1ae0c599081277e26cca5464b> Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4320 ====================================================================== Reported By: skayser Assigned To: bwalton ====================================================================== Project: apache2c Issue ID: 4320 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-03-04 18:03 CET Last Modified: 2010-10-26 03:51 CEST ====================================================================== Summary: Split off an apache2 utilities package for tools like "ab" Description: Currently, helpful tools which are in-dependent from apache itself, like the benchmarking tool "ab" are part of the core apache2c package (which pulls in apache itself). IMHO it would be useful to provide a package - like Debian has it with apache2-utils - that contains these tools and only depends on the portable apache runtime. http://packages.debian.org/lenny/apache2-utils ====================================================================== ---------------------------------------------------------------------- (0008407) bwalton (developer) - 2010-10-26 03:51 https://www.opencsw.org/mantis/view.php?id=4320#c8407 ---------------------------------------------------------------------- I agree that this would be a good split. What do you envision as the transition strategy for those that are using the tools if we split them out? Hypothetically, moving them as per your suggestion could break scripts on people until they add the new package... From noreply at opencsw.org Tue Oct 26 04:17:27 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 04:17:27 +0200 Subject: [bug-notifications] [cswclassutils 0004588]: cswinitsmf: FMRI dot in value detection is faulty Message-ID: <625562073d899604f9dd71f84700f29a@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4588 ====================================================================== Reported By: bwalton Assigned To: ====================================================================== Project: cswclassutils Issue ID: 4588 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-26 04:17 CEST Last Modified: 2010-10-26 04:17 CEST ====================================================================== Summary: cswinitsmf: FMRI dot in value detection is faulty Description: The grep statement used to detect a . in the FMRI name of cswinitsmf should be '\.' rather than '.'. ====================================================================== From noreply at opencsw.org Tue Oct 26 04:19:48 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 04:19:48 +0200 Subject: [bug-notifications] [cswclassutils 0004588]: cswinitsmf: FMRI dot in value detection is faulty In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4588 ====================================================================== Reported By: bwalton Assigned To: ====================================================================== Project: cswclassutils Issue ID: 4588 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-26 04:17 CEST Last Modified: 2010-10-26 04:19 CEST ====================================================================== Summary: cswinitsmf: FMRI dot in value detection is faulty Description: The grep statement used to detect a . in the FMRI name of cswinitsmf should be '\.' rather than '.'. ====================================================================== ---------------------------------------------------------------------- (0008408) bwalton (developer) - 2010-10-26 04:19 https://www.opencsw.org/mantis/view.php?id=4588#c8408 ---------------------------------------------------------------------- I just committed a change to i.cswinitsmf to address this. r11407. Look ok to you? From noreply at opencsw.org Tue Oct 26 04:22:21 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 04:22:21 +0200 Subject: [bug-notifications] [apache2rt 0003676]: Package contains Extra files In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3676 ====================================================================== Reported By: mwatters Assigned To: ====================================================================== Project: apache2rt Issue ID: 3676 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-05-17 03:32 CEST Last Modified: 2010-10-26 04:22 CEST ====================================================================== Summary: Package contains Extra files Description: This package should only include the libraries. Please move the following to apache2_devel: /opt/csw/apache2/share/build /opt/csw/apache2/share /opt/csw/apache2/sbin/apxs /opt/csw/apache2/sbin /opt/csw/apache2/man/man8/apxs.8 /opt/csw/apache2/man/man8 /opt/csw/apache2/man /opt/csw/apache2/lib/pkgconfig /opt/csw/apache2/bin/apu-config /opt/csw/apache2/bin/apu-1-config /opt/csw/apache2/share/build/instdso.sh /opt/csw/apache2/share/build/config_vars.mk /opt/csw/apache2/bin/apr-config /opt/csw/apache2/bin/apr-1-config and please remove dir /opt/csw/apache2/bin from the apache2rt package ====================================================================== ---------------------------------------------------------------------- (0008409) bwalton (manager) - 2010-10-26 04:22 https://www.opencsw.org/mantis/view.php?id=3676#c8409 ---------------------------------------------------------------------- Handled with split out of apr packages and release of 2.2.16. From noreply at opencsw.org Tue Oct 26 04:22:56 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 04:22:56 +0200 Subject: [bug-notifications] [apache2rt 0003875]: libaprutil lacks berkeleydb which breaks the locking mechanism of webdav In-Reply-To: Message-ID: <88784d5e1369bcde2337d6e7a4d982fc@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3875 ====================================================================== Reported By: user2176 Assigned To: ====================================================================== Project: apache2rt Issue ID: 3875 Category: other Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-09-02 13:24 CEST Last Modified: 2010-10-26 04:22 CEST ====================================================================== Summary: libaprutil lacks berkeleydb which breaks the locking mechanism of webdav Description: Upgrading apache2, bdb47 and svn rendered out wedav unusable. recompiling aprutil from apache 2.2.13 with ./configure --with-dbm=db47 --with-apr=/opt/csw/apache2 --prefix=/opt/csw/apache2 --with-ssl=/opt/csw --without-pgsql --with-berkeley-db=/opt/csw --with-ldap fixed the problems in the end ====================================================================== ---------------------------------------------------------------------- (0008410) bwalton (manager) - 2010-10-26 04:22 https://www.opencsw.org/mantis/view.php?id=3875#c8410 ---------------------------------------------------------------------- apr packages are now separate entities. From noreply at opencsw.org Tue Oct 26 04:28:47 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 04:28:47 +0200 Subject: [bug-notifications] [apache2c 0004581]: ln "cannot create" link seen install In-Reply-To: <34cb333670c9aacc074a26e52bf92421> Message-ID: <877e15df26d4a22f41bb0c6b13782900@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4581 ====================================================================== Reported By: james Assigned To: bwalton ====================================================================== Project: apache2c Issue ID: 4581 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-19 13:37 CEST Last Modified: 2010-10-26 04:28 CEST ====================================================================== Summary: ln "cannot create" link seen install Description: This might not matter (but how would I know?) and should be handled so it doesn't worry me: Installing class ... WARNING! FMRI path contained an illegal dot (removed) New FMRI path: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create /var/opt/csw/svc/method/svc-cswapache2: File exists ====================================================================== ---------------------------------------------------------------------- (0008411) bwalton (developer) - 2010-10-26 04:28 https://www.opencsw.org/mantis/view.php?id=4581#c8411 ---------------------------------------------------------------------- Both of these are issues in i.cswinitsmf. I've addressed the first and will handle the second shortly. From noreply at opencsw.org Tue Oct 26 04:29:10 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 04:29:10 +0200 Subject: [bug-notifications] [apache2c 0004581]: ln "cannot create" link seen install In-Reply-To: <34cb333670c9aacc074a26e52bf92421> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4581 ====================================================================== Reported By: james Assigned To: bwalton ====================================================================== Project: apache2c Issue ID: 4581 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-10-19 13:37 CEST Last Modified: 2010-10-26 04:29 CEST ====================================================================== Summary: ln "cannot create" link seen install Description: This might not matter (but how would I know?) and should be handled so it doesn't worry me: Installing class ... WARNING! FMRI path contained an illegal dot (removed) New FMRI path: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create /var/opt/csw/svc/method/svc-cswapache2: File exists ====================================================================== ---------------------------------------------------------------------- (0008412) bwalton (developer) - 2010-10-26 04:29 https://www.opencsw.org/mantis/view.php?id=4581#c8412 ---------------------------------------------------------------------- BTW, they are both harmless in this case. From noreply at opencsw.org Tue Oct 26 04:40:47 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 04:40:47 +0200 Subject: [bug-notifications] [ap2_worker 0004580]: update does not restart in worker In-Reply-To: <9990dbf574792fb4c29f4f0ad111da79> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4580 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: ap2_worker Issue ID: 4580 Category: packaging Reproducibility: sometimes Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2010-10-19 13:34 CEST Last Modified: 2010-10-26 04:40 CEST ====================================================================== Summary: update does not restart in worker Description: Updating the previous install running httpd.worker restarts prefork not worker. ====================================================================== ---------------------------------------------------------------------- (0008413) bwalton (manager) - 2010-10-26 04:40 https://www.opencsw.org/mantis/view.php?id=4580#c8413 ---------------------------------------------------------------------- How did you perform the upgrade? While I think there is an issue here, you shouldn't have seen the 'ERROR:...' bit as that should be handled by the following preinstall script from CSWapache2: #!/bin/sh # The old apache2 packages could potentially leave a dangling # sbin/httpd file. As this would prevent successful delivery of the # new packages (alternatives won't instantiate sbin/httpd as a symlink # since it exists already), we need to kill sbin/httpd if it exists # when CSWapache2 is installed. HTTPD=$PKG_INSTALL_ROOT/opt/csw/apache2/sbin/httpd if [ -f "$HTTPD" -a ! -L "$HTTPD" ]; then rm -f "$HTTPD" fi exit 0 From noreply at opencsw.org Tue Oct 26 11:01:34 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 26 Oct 2010 11:01:34 +0200 Subject: [bug-notifications] [socat 0004509]: Please upgrade to 1.7.1.3 In-Reply-To: <406b569cf204fd9dfe848a22ade06f36> Message-ID: <8262c861aa06ded8b1b376d602242f71@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4509 ====================================================================== Reported By: dam Assigned To: skayser ====================================================================== Project: socat Issue ID: 4509 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-08-02 13:38 CEST Last Modified: 2010-10-26 11:01 CEST ====================================================================== Summary: Please upgrade to 1.7.1.3 Description: Please upgrade to 1.7.1.3 as released today on SFW ====================================================================== ---------------------------------------------------------------------- (0008383) dam (administrator) - 2010-10-20 14:28 https://www.opencsw.org/mantis/view.php?id=4509#c8383 ---------------------------------------------------------------------- PING... This is a security fix :-) From noreply at opencsw.org Wed Oct 27 08:58:25 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 08:58:25 +0200 Subject: [bug-notifications] [py_ldap 0002474]: openssl dependancy deprecated: please use openssl_rt instead In-Reply-To: <77235b64c661436fdc3f31e4eb07b6f4> Message-ID: <05b317581d1ac00e06ba745fd45dba3c@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2474 ====================================================================== Reported By: yann Assigned To: kester ====================================================================== Project: py_ldap Issue ID: 2474 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2007-07-28 09:11 CEST Last Modified: 2010-10-27 08:58 CEST ====================================================================== Summary: openssl dependancy deprecated: please use openssl_rt instead Description: Following the openssl package split, the ssl libraries are now directly provided by the openssl_rt package. The openssl package still exists, it\'s a metapackage which will install openssl_rt, openssl_devel and openssl_utils which contains respectively the ssl libraries, the development files and the openssl utilities. Your package probably only use the ssl libraries, so to avoid installing unnecessary dependancies, please update your package to depend on openssl_rt rather than openssl. ====================================================================== From noreply at opencsw.org Wed Oct 27 08:59:49 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 08:59:49 +0200 Subject: [bug-notifications] [py_ldap 0002474]: openssl dependancy deprecated: please use openssl_rt instead In-Reply-To: <77235b64c661436fdc3f31e4eb07b6f4> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2474 ====================================================================== Reported By: yann Assigned To: kester ====================================================================== Project: py_ldap Issue ID: 2474 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-07-28 09:11 CEST Last Modified: 2010-10-27 08:59 CEST ====================================================================== Summary: openssl dependancy deprecated: please use openssl_rt instead Description: Following the openssl package split, the ssl libraries are now directly provided by the openssl_rt package. The openssl package still exists, it\'s a metapackage which will install openssl_rt, openssl_devel and openssl_utils which contains respectively the ssl libraries, the development files and the openssl utilities. Your package probably only use the ssl libraries, so to avoid installing unnecessary dependancies, please update your package to depend on openssl_rt rather than openssl. ====================================================================== ---------------------------------------------------------------------- (0008416) kester (manager) - 2010-10-27 08:59 https://www.opencsw.org/mantis/view.php?id=2474#c8416 ---------------------------------------------------------------------- Fixed in 2.3.12,REV=2010.10.26 (GAR SNV REV 11423) From noreply at opencsw.org Wed Oct 27 16:33:42 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 16:33:42 +0200 Subject: [bug-notifications] [apache2 0004579]: Can not install in zone In-Reply-To: <1142676cd18a846802fd82f259d2aac5> Message-ID: <48a6509d02792ac40acf38241eb1b168@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4579 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2 Issue ID: 4579 Category: packaging Reproducibility: sometimes Severity: block Priority: high Status: new ====================================================================== Date Submitted: 2010-10-19 13:32 CEST Last Modified: 2010-10-27 16:33 CEST ====================================================================== Summary: Can not install in zone Description: Package tries to install files in /usr and fails when in zone. ====================================================================== ---------------------------------------------------------------------- (0008417) japester (reporter) - 2010-10-27 16:33 https://www.opencsw.org/mantis/view.php?id=4579#c8417 ---------------------------------------------------------------------- This is the issue. dios[1032]~/CSWapache2> grep '/usr/' pkgmap 1 f none /usr/sadm/install/scripts/i.cswap2mod 0555 root bin 2051 27131 1286585397 1 f none /usr/sadm/install/scripts/r.cswap2mod 0555 root bin 1021 10295 1286585397 dios[1033]~/CSWapache2> The package attempts to install files into areas outside of the scope of /opt/csw/ This will always fail in a sparse root zone. Reading through the scripts themselves, they should go somewhere like '/opt/csw/apache2/sbin' From noreply at opencsw.org Wed Oct 27 17:06:59 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 17:06:59 +0200 Subject: [bug-notifications] [apache2 0004579]: Can not install in zone In-Reply-To: <1142676cd18a846802fd82f259d2aac5> Message-ID: <6f1e52ccbea9d4ec90eb0a25b9251001@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4579 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2 Issue ID: 4579 Category: packaging Reproducibility: sometimes Severity: block Priority: high Status: new ====================================================================== Date Submitted: 2010-10-19 13:32 CEST Last Modified: 2010-10-27 17:06 CEST ====================================================================== Summary: Can not install in zone Description: Package tries to install files in /usr and fails when in zone. ====================================================================== ---------------------------------------------------------------------- (0008418) bwalton (manager) - 2010-10-27 17:06 https://www.opencsw.org/mantis/view.php?id=4579#c8418 ---------------------------------------------------------------------- Well, the files can't go in apache2/sbin as they're class action scripts. They must live in /usr/sadm/install/scripts. That being said, I'm looking at options to move them to a separate package. The dependencies involved make this not as straight forward as that might sound though. From noreply at opencsw.org Wed Oct 27 17:39:52 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 17:39:52 +0200 Subject: [bug-notifications] [ap2_worker 0004580]: update does not restart in worker In-Reply-To: <9990dbf574792fb4c29f4f0ad111da79> Message-ID: <23d5f15f7472d0e611f8f7e9b7989a4c@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4580 ====================================================================== Reported By: james Assigned To: bwalton ====================================================================== Project: ap2_worker Issue ID: 4580 Category: packaging Reproducibility: sometimes Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2010-10-19 13:34 CEST Last Modified: 2010-10-27 17:39 CEST ====================================================================== Summary: update does not restart in worker Description: Updating the previous install running httpd.worker restarts prefork not worker. ====================================================================== ---------------------------------------------------------------------- (0008419) james (developer) - 2010-10-27 17:39 https://www.opencsw.org/mantis/view.php?id=4580#c8419 ---------------------------------------------------------------------- I just ran update on an existing system. I can't test becuse it won't go in a zone, that may be the cause of this anyway. From noreply at opencsw.org Wed Oct 27 17:42:07 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 17:42:07 +0200 Subject: [bug-notifications] [apache2 0004579]: Can not install in zone In-Reply-To: <1142676cd18a846802fd82f259d2aac5> Message-ID: <977ca36ac47b2edee949ebb8dc63cd17@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4579 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2 Issue ID: 4579 Category: packaging Reproducibility: sometimes Severity: block Priority: high Status: new ====================================================================== Date Submitted: 2010-10-19 13:32 CEST Last Modified: 2010-10-27 17:42 CEST ====================================================================== Summary: Can not install in zone Description: Package tries to install files in /usr and fails when in zone. ====================================================================== ---------------------------------------------------------------------- (0008420) james (developer) - 2010-10-27 17:42 https://www.opencsw.org/mantis/view.php?id=4579#c8420 ---------------------------------------------------------------------- Then it can't use classaction scripts. They are a pain in CSWcswclassutils as it is, we certainly don't need to add to the problem. From noreply at opencsw.org Wed Oct 27 17:52:26 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 17:52:26 +0200 Subject: [bug-notifications] [apache2 0004579]: Can not install in zone In-Reply-To: <1142676cd18a846802fd82f259d2aac5> Message-ID: <77f2204f31c769f30f86e8c04668e078@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4579 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2 Issue ID: 4579 Category: packaging Reproducibility: sometimes Severity: block Priority: high Status: new ====================================================================== Date Submitted: 2010-10-19 13:32 CEST Last Modified: 2010-10-27 17:52 CEST ====================================================================== Summary: Can not install in zone Description: Package tries to install files in /usr and fails when in zone. ====================================================================== ---------------------------------------------------------------------- (0008421) bwalton (manager) - 2010-10-27 17:52 https://www.opencsw.org/mantis/view.php?id=4579#c8421 ---------------------------------------------------------------------- Well, it doesn't specifically need to, but other apache modules will use these. I can split them out so the core apache packages aren't dependent on them. I need to do this carefully though. I thought we had decided that sparse root wasn't a "supported" target though...? From noreply at opencsw.org Wed Oct 27 18:03:00 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 18:03:00 +0200 Subject: [bug-notifications] [apache2 0004579]: Can not install in zone In-Reply-To: <1142676cd18a846802fd82f259d2aac5> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4579 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2 Issue ID: 4579 Category: packaging Reproducibility: sometimes Severity: block Priority: high Status: new ====================================================================== Date Submitted: 2010-10-19 13:32 CEST Last Modified: 2010-10-27 18:03 CEST ====================================================================== Summary: Can not install in zone Description: Package tries to install files in /usr and fails when in zone. ====================================================================== ---------------------------------------------------------------------- (0008422) james (developer) - 2010-10-27 18:03 https://www.opencsw.org/mantis/view.php?id=4579#c8422 ---------------------------------------------------------------------- "we"? sparse zones not supported and I leave the project today. The only thing that was reluctantly agreed for now was that global zone interaction was needed to install CSWcswclassutils. That still excludes some users and I bet it's not necessary (the use of CAS that is, I say necessary not useful). From noreply at opencsw.org Wed Oct 27 18:17:42 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Oct 2010 18:17:42 +0200 Subject: [bug-notifications] [apache2 0004579]: Can not install in zone In-Reply-To: <1142676cd18a846802fd82f259d2aac5> Message-ID: <6ce8713491f607761bfbf617ed881cc2@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4579 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: apache2 Issue ID: 4579 Category: packaging Reproducibility: sometimes Severity: block Priority: high Status: new ====================================================================== Date Submitted: 2010-10-19 13:32 CEST Last Modified: 2010-10-27 18:17 CEST ====================================================================== Summary: Can not install in zone Description: Package tries to install files in /usr and fails when in zone. ====================================================================== ---------------------------------------------------------------------- (0008423) japester (reporter) - 2010-10-27 18:17 https://www.opencsw.org/mantis/view.php?id=4579#c8423 ---------------------------------------------------------------------- http://www.opencsw.org/use-it/sharing-optcsw/ refers to CSWcswclassutils being special, as it's the only package to install content into /usr. Do we really need apache2 to be just as special? Random left wing thought, is it possible to do something similar to what Debian does, with its a2enmod and a2dismod scripts? They let the end user manage enabling/disabling modules, rather than having them automatically done. That way the scripts can be kept inside the /opt/csw/apache directory scope, without having to resort to a classutil script. From noreply at opencsw.org Thu Oct 28 03:54:22 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 28 Oct 2010 03:54:22 +0200 Subject: [bug-notifications] [ruby 0004399]: Segmentation Fault in Garbage Collection for Ruby 1.8.7 prior to Dec 2009 In-Reply-To: Message-ID: <865f7db08e8773a8ec178f25f4e294af@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4399 ====================================================================== Reported By: nutznboltz Assigned To: bwalton ====================================================================== Project: ruby Issue ID: 4399 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2010-04-16 18:09 CEST Last Modified: 2010-10-28 03:54 CEST ====================================================================== Summary: Segmentation Fault in Garbage Collection for Ruby 1.8.7 prior to Dec 2009 Description: A known bug exists in Ruby that causes it crash with segmentation faults (SIGSEGV, signal 11, etc.) when it allocates objects frequently. This is causing the Ops Code Chef client to crash on our Solaris 10 systems. A upstream fix was released. Could someone rebuild the OpenCSW Ruby from the latest 1.8.7 sources? ====================================================================== ---------------------------------------------------------------------- (0008424) bwalton (manager) - 2010-10-28 03:54 https://www.opencsw.org/mantis/view.php?id=4399#c8424 ---------------------------------------------------------------------- I'm rolling a new package with a patch that will hopefully address this issue. Will you be able to test them when they're ready? Thanks -Ben From noreply at opencsw.org Thu Oct 28 15:56:35 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 28 Oct 2010 15:56:35 +0200 Subject: [bug-notifications] [cswclassutils 0004588]: cswinitsmf: FMRI dot in value detection is faulty In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4588 ====================================================================== Reported By: bwalton Assigned To: bonivart ====================================================================== Project: cswclassutils Issue ID: 4588 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-26 04:17 CEST Last Modified: 2010-10-28 15:56 CEST ====================================================================== Summary: cswinitsmf: FMRI dot in value detection is faulty Description: The grep statement used to detect a . in the FMRI name of cswinitsmf should be '\.' rather than '.'. ====================================================================== ---------------------------------------------------------------------- (0008408) bwalton (developer) - 2010-10-26 04:19 https://www.opencsw.org/mantis/view.php?id=4588#c8408 ---------------------------------------------------------------------- I just committed a change to i.cswinitsmf to address this. r11407. Look ok to you? From noreply at opencsw.org Thu Oct 28 15:58:08 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 28 Oct 2010 15:58:08 +0200 Subject: [bug-notifications] [cswclassutils 0004588]: cswinitsmf: FMRI dot in value detection is faulty In-Reply-To: Message-ID: <55dcc5636fb6832fd2572cd63326297f@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4588 ====================================================================== Reported By: bwalton Assigned To: bonivart ====================================================================== Project: cswclassutils Issue ID: 4588 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-10-26 04:17 CEST Last Modified: 2010-10-28 15:58 CEST ====================================================================== Summary: cswinitsmf: FMRI dot in value detection is faulty Description: The grep statement used to detect a . in the FMRI name of cswinitsmf should be '\.' rather than '.'. ====================================================================== ---------------------------------------------------------------------- (0008425) bonivart (manager) - 2010-10-28 15:58 https://www.opencsw.org/mantis/view.php?id=4588#c8425 ---------------------------------------------------------------------- One byte change - easy audit. :-) Yes, it looks ok. From noreply at opencsw.org Sun Oct 31 13:39:10 2010 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 31 Oct 2010 13:39:10 +0100 Subject: [bug-notifications] [ruby 0004399]: Segmentation Fault in Garbage Collection for Ruby 1.8.7 prior to Dec 2009 In-Reply-To: Message-ID: <14593ec5b81434c5f99dc39ee097f881@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4399 ====================================================================== Reported By: nutznboltz Assigned To: bwalton ====================================================================== Project: ruby Issue ID: 4399 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2010-04-16 18:09 CEST Last Modified: 2010-10-31 13:39 CET ====================================================================== Summary: Segmentation Fault in Garbage Collection for Ruby 1.8.7 prior to Dec 2009 Description: A known bug exists in Ruby that causes it crash with segmentation faults (SIGSEGV, signal 11, etc.) when it allocates objects frequently. This is causing the Ops Code Chef client to crash on our Solaris 10 systems. A upstream fix was released. Could someone rebuild the OpenCSW Ruby from the latest 1.8.7 sources? ====================================================================== ---------------------------------------------------------------------- (0008426) bwalton (manager) - 2010-10-31 13:39 https://www.opencsw.org/mantis/view.php?id=4399#c8426 ---------------------------------------------------------------------- Ok, there are updated ruby packages available here: http://buildfarm.opencsw.org/experimental.html#ruby Aside from the patch to (hopefully) fix the GC segfault, there is also a change to the libruby.so.1 SONAME. These changes will likely break binary gems and I'm still determining the best course of action (short term, simply install CSWrubydev). You should still be able to perform the testing required to ensure the GC issue is or is not handled though.