From noreply at opencsw.org Fri Jul 1 11:58:45 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Jul 2011 11:58:45 +0200 Subject: [bug-notifications] [mysql5 0004798]: mysql_secure_installation returns error with current mysql5 package In-Reply-To: <19f5b3fb53d5338cbb8370c8f65d5eb9> Message-ID: <1d820ee5367324d3f02a8e94abb397d3@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4798 ====================================================================== Reported By: AirOnSkin Assigned To: ====================================================================== Project: mysql5 Issue ID: 4798 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-06-30 11:45 CEST Last Modified: 2011-07-01 11:58 CEST ====================================================================== Summary: mysql_secure_installation returns error with current mysql5 package Description: After installing mysql5 and running mysql_secure_installation the script breaks at the second action (removing anonymous user) because the first action (setting the root password) doesn't work. The new root password doesn't get applied (even if the output says so), hence the script has no rights for the second action. After typing the new root password twice the following appears (full log attached): Reloading privilege tables.. /opt/csw/mysql5/bin/sparcv9/mysql_secure_installation: !: not found ====================================================================== ---------------------------------------------------------------------- (0009169) AirOnSkin (reporter) - 2011-07-01 11:58 https://www.opencsw.org/mantis/view.php?id=4798#c9169 ---------------------------------------------------------------------- I'll test it on a fresh install next week. It seems only the password changeing doesn't work. From noreply at opencsw.org Fri Jul 1 21:36:53 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Jul 2011 21:36:53 +0200 Subject: [bug-notifications] [libao 0000463]: Have to specify -o dev:$UTAUDIODEV to work on sunray. In-Reply-To: <517d6bbae5b412900fe8d92ff7b503e5> Message-ID: <60d6e7e6ccd2b23933b2c4b0bf1da265@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=463 ====================================================================== Reported By: alfborge Assigned To: dam ====================================================================== Project: libao Issue ID: 463 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2004-06-17 11:58 CEST Last Modified: 2011-07-01 21:36 CEST ====================================================================== Summary: Have to specify -o dev:$UTAUDIODEV to work on sunray. Description: The Sun Ray system uses an env variable $AUDIODEV or $UTAUDIODEV that should be read when using the sun audio driver. This variable should override the default audio device. To get ogg123 to work I had to specify the device manually to get things to work. ====================================================================== ---------------------------------------------------------------------- (0009170) dam (administrator) - 2011-07-01 21:36 https://www.opencsw.org/mantis/view.php?id=463#c9170 ---------------------------------------------------------------------- Fixed in CSWlibao4 1.1.0,REV=2011.03.25 and released to current/. From noreply at opencsw.org Fri Jul 1 22:24:49 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Jul 2011 22:24:49 +0200 Subject: [bug-notifications] [gtar 0004601]: gtar -xf Segmentation Fault In-Reply-To: <622a5d5760a3452a1f377ea013851900> Message-ID: <74fa2f5d5fba3f9f8cf4851b18654b72@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4601 ====================================================================== Reported By: smwardle Assigned To: phil ====================================================================== Project: gtar Issue ID: 4601 Category: regular use Reproducibility: always Severity: crash Priority: normal Status: closed Resolution: reopened Fixed in Version: ====================================================================== Date Submitted: 2010-11-09 11:36 CET Last Modified: 2011-07-01 22:24 CEST ====================================================================== Summary: gtar -xf Segmentation Fault Description: Using gtar to extract multiple files from an archive (created by gtar) gives a Segmentation Fault. ====================================================================== ---------------------------------------------------------------------- (0009171) dam (administrator) - 2011-07-01 22:24 https://www.opencsw.org/mantis/view.php?id=4601#c9171 ---------------------------------------------------------------------- Fixed in 1.26,REV=2011.06.29 and released to current/. From noreply at opencsw.org Fri Jul 1 22:38:05 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 1 Jul 2011 22:38:05 +0200 Subject: [bug-notifications] [libgnutls26 0004799]: Missing dependency to CSWlibgcrypt11 Message-ID: <9cc3b2ca8c2d482875ba423ed72e37dc@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4799 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: libgnutls26 Issue ID: 4799 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-01 22:38 CEST Last Modified: 2011-07-01 22:38 CEST ====================================================================== Summary: Missing dependency to CSWlibgcrypt11 Description: Missing dependency to CSWlibgcrypt11, installing the missing package resolves the issue. ====================================================================== From noreply at opencsw.org Sat Jul 2 00:45:21 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 00:45:21 +0200 Subject: [bug-notifications] [libcairo2 0004792]: Dependency broken after pkgutil -u (wireshark, xhcat and more) In-Reply-To: <187f3f6e0355365604081efbf2c312fa> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4792 ====================================================================== Reported By: arkanoid Assigned To: dam ====================================================================== Project: libcairo2 Issue ID: 4792 Category: regular use Reproducibility: have not tried Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-06-23 12:42 CEST Last Modified: 2011-07-02 00:45 CEST ====================================================================== Summary: Dependency broken after pkgutil -u (wireshark, xhcat and more) Description: ld.so.1: [...]: fatal: relocation error: file /opt/csw/lib/sparcv8/libcairo.so.2: symbol pixman_image_composite32: referenced symbol not found ====================================================================== ---------------------------------------------------------------------- (0009172) arkanoid (reporter) - 2011-07-02 00:45 https://www.opencsw.org/mantis/view.php?id=4792#c9172 ---------------------------------------------------------------------- Resolved: was caused by stale symlink bash-3.00$ ls -l /opt/csw/lib/libpixman-1.so.0 lrwxrwxrwx 1 root root 21 Jun 18 12:47 /opt/csw/lib/libpixman-1.so.0 -> libpixman-1.so.0.18.0 while libpixman-1.so.0.18.0 was replaced with libpixman-1.so.0.21.4 the symlink was not updated. ln -s to the proper file did solve the problem From noreply at opencsw.org Sat Jul 2 03:16:30 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 03:16:30 +0200 Subject: [bug-notifications] [php5 0004520]: mbregex missing from PHP In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4520 ====================================================================== Reported By: opk Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4520 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-08-13 16:38 CEST Last Modified: 2011-07-02 03:16 CEST ====================================================================== Summary: mbregex missing from PHP Description: I'm attempting to migrate an application from blastwave stable to recent opencsw and I get the following message: PHP Fatal error: Call to undefined function mb_ereg_replace This can be reproduced easily with: echo '' | /opt/csw/php5/bin/php According to phpinfo(), php5 was compiled with --enable-mbregex=shared yet I can't find any shared library corresponding to mbregex. Has it perhaps been forgotten in the packaging. I do have mbstring and it is enabled in the configuration file. On the old installation, phpinfo() reports a bare --enable-mbregex. ====================================================================== ---------------------------------------------------------------------- (0009173) bwalton (developer) - 2011-07-02 03:16 https://www.opencsw.org/mantis/view.php?id=4520#c9173 ---------------------------------------------------------------------- Solved by removing the --enable-mbregex=shared configure option. Testing appreciated: http://buildfarm.opencsw.org/experimental.html#php5 root @ r2 : /tmp # pkgparam CSWphp5 VERSION 5.3.6,REV=2011.07.02 root @ r2 : /tmp # which php /opt/csw/bin/php root @ r2 : /tmp # cat test.php root @ r2 : /tmp # php ./test.php lblblb From noreply at opencsw.org Sat Jul 2 19:18:14 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 19:18:14 +0200 Subject: [bug-notifications] [cswclassutils 0004063]: RFE: CAS for adding/removing entries to/from /etc/shells In-Reply-To: <29abfbf355e252388a6b049029c59718> Message-ID: <42ef0c386da1f5c61c21d66fdd79f3d7@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4063 ====================================================================== Reported By: skayser Assigned To: bwalton ====================================================================== Project: cswclassutils Issue ID: 4063 Category: regular use Reproducibility: N/A Severity: feature Priority: low Status: assigned ====================================================================== Date Submitted: 2009-12-02 16:17 CET Last Modified: 2011-07-02 19:18 CEST ====================================================================== Summary: RFE: CAS for adding/removing entries to/from /etc/shells Description: Could we get a CAS to handle /etc/shells entries. Currently bash, zsh, tcsh and maybe others employ their own postinstall/postremove scripts to do so. ====================================================================== ---------------------------------------------------------------------- (0007068) bwalton (manager) - 2009-12-06 14:50 https://www.opencsw.org/mantis/view.php?id=4063#c7068 ---------------------------------------------------------------------- It would be a superset of cswetcservices. The trick is that the file may not exist initially at all. In the case where test ! -f /etc/shells is true, a default list needs to be added. If the list of all valid shells (sol8 and up) is provided, I can look at adding this CAS. From noreply at opencsw.org Sat Jul 2 19:18:26 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 19:18:26 +0200 Subject: [bug-notifications] [cswclassutils 0004063]: RFE: CAS for adding/removing entries to/from /etc/shells In-Reply-To: <29abfbf355e252388a6b049029c59718> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4063 ====================================================================== Reported By: skayser Assigned To: bwalton ====================================================================== Project: cswclassutils Issue ID: 4063 Category: regular use Reproducibility: N/A Severity: feature Priority: low Status: assigned ====================================================================== Date Submitted: 2009-12-02 16:17 CET Last Modified: 2011-07-02 19:18 CEST ====================================================================== Summary: RFE: CAS for adding/removing entries to/from /etc/shells Description: Could we get a CAS to handle /etc/shells entries. Currently bash, zsh, tcsh and maybe others employ their own postinstall/postremove scripts to do so. ====================================================================== ---------------------------------------------------------------------- (0009174) bwalton (manager) - 2011-07-02 19:18 https://www.opencsw.org/mantis/view.php?id=4063#c9174 ---------------------------------------------------------------------- Test package available in http://buildfarm.opencsw.org/experimental.html#cswclassutils (shortly, anyway). Testing welcome. From noreply at opencsw.org Sat Jul 2 19:21:58 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 19:21:58 +0200 Subject: [bug-notifications] [cswutils 0004794]: pkgdb init chokes on package names with numbers In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4794 ====================================================================== Reported By: igalic Assigned To: maciej ====================================================================== Project: cswutils Issue ID: 4794 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-06-24 21:47 CEST Last Modified: 2011-07-02 19:21 CEST ====================================================================== Summary: pkgdb init chokes on package names with numbers Description: Traceback (most recent call last): File "gar/bin/pkgdb", line 685, in main() File "gar/bin/pkgdb", line 413, in main dm.AutoManage() File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/database.py", line 65, in AutoManage self._CheckAndMaybeFixFreshness(auto_fix=auto_manage) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/database.py", line 105, in _CheckAndMaybeFixFreshness ldm.RefreshDatabase() File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/database.py", line 322, in RefreshDatabase include_prefixes=frozenset(["CSW"])) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/system_pkgmap.py", line 351, in ImportData self._ImportFiles(data, include_prefixes, show_progress=show_progress) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/system_pkgmap.py", line 480, in _ImportFiles sqo_srv4, osrel, arch, sqo_catrel.name) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/checkpkg_lib.py", line 1011, in AddSrv4ToCatalog % sqo_srv4.catalogname) checkpkg_lib.CatalogDatabaseError: There already is a package with that catalogname: sunw_i_rf ====================================================================== ---------------------------------------------------------------------- (0009136) maciej (developer) - 2011-06-25 11:57 https://www.opencsw.org/mantis/view.php?id=4794#c9136 ---------------------------------------------------------------------- The patch has been submitted to the repository: http://sourceforge.net/apps/trac/gar/changeset/14885 Thanks, Igor! From noreply at opencsw.org Sat Jul 2 19:22:21 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 19:22:21 +0200 Subject: [bug-notifications] [cswutils 0004791]: checkpkg: incompatible with 'p' files in /var/sadm/install/contents In-Reply-To: <91828d0e6a300adf5fce759e5a5b37a1> Message-ID: <739d88e71740a55b7ea8842c24da4ab4@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4791 ====================================================================== Reported By: skayser Assigned To: maciej ====================================================================== Project: cswutils Issue ID: 4791 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-06-22 00:53 CEST Last Modified: 2011-07-02 19:22 CEST ====================================================================== Summary: checkpkg: incompatible with 'p' files in /var/sadm/install/contents Description: Just reported on #opencsw by jMCg. Relevant gmake package excerpt: ## Validating control scripts. ## Packaging complete. mkp: exec( pkgtrans -s /home/igalic/spool.5.10-i386 /tmp/zbx_agent-1.8.5,REV=2011.06.21-SunOS5.10-i386-UNCOMMITTED.pkg CSWzbx-agent ) Transferring package instance mkp: exec( gzip -9 -f /tmp/zbx_agent-1.8.5,REV=2011.06.21-SunOS5.10-i386-UNCOMMITTED.pkg ) mkp: exec( mv /tmp/zbx_agent-1.8.5,REV=2011.06.21-SunOS5.10-i386-UNCOMMITTED.pkg.gz /opt/install/unix/baw/csw ) mkp: exec( rm -rf /home/igalic/spool.5.10-i386/CSWzbx-agent ) WARNING:root:No configuration file found. Will attempt to create an sane default configuration in '/home/igalic/.checkpkg/checkpkg_auto.ini'. CRITICAL:root:Database schema version: 1, Application expects version: 7 WARNING:root:Old database schema detected. WARNING:root:Dropping and creating all tables. WARNING:root:Cache database is not up to date. Refreshing it. WARNING:root:Refreshing the database. It may take a long time, please be patient. WARNING:root:If you need a way to make it faster, please see: WARNING:root:http://wiki.opencsw.org/checkpkg#toc5 .Traceback (most recent call last): File "gar//bin/checkpkg", line 179, in main() File "gar//bin/checkpkg", line 88, in main dm.AutoManage() File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/database.py", line 65, in AutoManage self._CheckAndMaybeFixFreshness(auto_fix=auto_manage) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/database.py", line 105, in _CheckAndMaybeFixFreshness ldm.RefreshDatabase() File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/database.py", line 317, in RefreshDatabase data = spi.Index(show_progress=True) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/system_pkgmap.py", line 269, in Index contents_stream, pkginfo_stream, self.osrel, self.arch, show_progress) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/system_pkgmap.py", line 259, in GetDataStructure "contents": self._ParseInstallContents(contents_stream, show_progress), File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/system_pkgmap.py", line 220, in _ParseInstallContents d = self._ParsePkgmapLine(line) File "/buildr/mgar/pkg/zbx-agent/trunk/gar/lib/python/system_pkgmap.py", line 184, in _ParsePkgmapLine % (repr(file_type), repr(line))) system_pkgmap.ParsingError: Wrong file type: 'p' in '/etc/scn/scn_aa_read p none 0600 root sys SUNWscn-agentfacade-r\n' gmake: *** [pkgcheck] Error 2 igalic at asd5inbld002:/buildr/mgar/pkg/zbx-agent/trunk> ====================================================================== ---------------------------------------------------------------------- (0009135) maciej (developer) - 2011-06-24 11:56 https://www.opencsw.org/mantis/view.php?id=4791#c9135 ---------------------------------------------------------------------- The patch is now in the repository: http://sourceforge.net/apps/trac/gar/changeset/14874 Thanks! From noreply at opencsw.org Sat Jul 2 19:32:47 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 19:32:47 +0200 Subject: [bug-notifications] [findutils 0001101]: gupdatedb mktemp and ! In-Reply-To: <794dd097874e7d36fe395c9dc0c1e15b> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1101 ====================================================================== Reported By: james Assigned To: bwalton ====================================================================== Project: findutils Issue ID: 1101 Category: regular use Reproducibility: sometimes Severity: tweak Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2005-07-26 18:10 CEST Last Modified: 2011-07-02 19:32 CEST ====================================================================== Summary: gupdatedb mktemp and ! Description: This started as a request for mktemp but even with mktemp gupdatedb needs a tweak. Without CSWmktemp: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found Install CSWmktemp which is not in the findutils depend list and it still fails: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: !: not found becasue the ! is not /bin/sh, I guess the was written for a system that emulated sh with something else, probably bash. #!/bin/ksh at the top will fix it. ====================================================================== ---------------------------------------------------------------------- (0009056) james (developer) - 2011-05-16 10:56 https://www.opencsw.org/mantis/view.php?id=1101#c9056 ---------------------------------------------------------------------- The date on the POSIX reference is 2004 and this bug was registered in 2005. It is highly likely at that time, using Solaris 8, /bin/sh was not POSIX compliment. Whether it was or not is not relevant to the fact of the matter being that gupdatedb failed on a target system and was fixable using the suggestion I made in 2005. On Solaris 9, the current base system, gupdatedb appear to works. Is this proof that if reports are ignored for long enough there exists a probability that bugs will fix themselves? And if we wait long enough this bug report could morph into the complete works of Shakespeare. ---------------------------------------------------------------------- (0009175) bwalton (manager) - 2011-07-02 19:32 https://www.opencsw.org/mantis/view.php?id=1101#c9175 ---------------------------------------------------------------------- Closing this since it only affects Solaris 8 which is not supported any longer. -Ben From noreply at opencsw.org Sat Jul 2 20:15:45 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 2 Jul 2011 20:15:45 +0200 Subject: [bug-notifications] [findutils 0001101]: gupdatedb mktemp and ! In-Reply-To: <794dd097874e7d36fe395c9dc0c1e15b> Message-ID: <46fafe8dfea9e30bccdae521fa0ed715@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1101 ====================================================================== Reported By: james Assigned To: bwalton ====================================================================== Project: findutils Issue ID: 1101 Category: regular use Reproducibility: sometimes Severity: tweak Priority: normal Status: closed Resolution: no change required Fixed in Version: ====================================================================== Date Submitted: 2005-07-26 18:10 CEST Last Modified: 2011-07-02 20:15 CEST ====================================================================== Summary: gupdatedb mktemp and ! Description: This started as a request for mktemp but even with mktemp gupdatedb needs a tweak. Without CSWmktemp: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found Install CSWmktemp which is not in the findutils depend list and it still fails: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: !: not found becasue the ! is not /bin/sh, I guess the was written for a system that emulated sh with something else, probably bash. #!/bin/ksh at the top will fix it. ====================================================================== ---------------------------------------------------------------------- (0009175) bwalton (manager) - 2011-07-02 19:32 https://www.opencsw.org/mantis/view.php?id=1101#c9175 ---------------------------------------------------------------------- Closing this since it only affects Solaris 8 which is not supported any longer. -Ben ---------------------------------------------------------------------- (0009176) james (developer) - 2011-07-02 20:15 https://www.opencsw.org/mantis/view.php?id=1101#c9176 ---------------------------------------------------------------------- The mktemp errors still applies? From noreply at opencsw.org Sun Jul 3 03:44:53 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Jul 2011 03:44:53 +0200 Subject: [bug-notifications] [findutils 0001101]: gupdatedb mktemp and ! In-Reply-To: <794dd097874e7d36fe395c9dc0c1e15b> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1101 ====================================================================== Reported By: james Assigned To: bwalton ====================================================================== Project: findutils Issue ID: 1101 Category: regular use Reproducibility: sometimes Severity: tweak Priority: normal Status: closed Resolution: no change required Fixed in Version: ====================================================================== Date Submitted: 2005-07-26 18:10 CEST Last Modified: 2011-07-03 03:44 CEST ====================================================================== Summary: gupdatedb mktemp and ! Description: This started as a request for mktemp but even with mktemp gupdatedb needs a tweak. Without CSWmktemp: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found Install CSWmktemp which is not in the findutils depend list and it still fails: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: !: not found becasue the ! is not /bin/sh, I guess the was written for a system that emulated sh with something else, probably bash. #!/bin/ksh at the top will fix it. ====================================================================== ---------------------------------------------------------------------- (0009176) james (developer) - 2011-07-02 20:15 https://www.opencsw.org/mantis/view.php?id=1101#c9176 ---------------------------------------------------------------------- The mktemp errors still applies? ---------------------------------------------------------------------- (0009177) bwalton (manager) - 2011-07-03 03:44 https://www.opencsw.org/mantis/view.php?id=1101#c9177 ---------------------------------------------------------------------- Yes it does. Sorry. I've updated the build recipe and will push an update soon. Thanks -Ben From noreply at opencsw.org Sun Jul 3 05:34:36 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Jul 2011 05:34:36 +0200 Subject: [bug-notifications] [findutils 0001014]: new 4.2.23 stable release announced In-Reply-To: <99bbd550b08f6873cbab97c740ad006e> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1014 ====================================================================== Reported By: pfelecan Assigned To: car ====================================================================== Project: findutils Issue ID: 1014 Category: upgrade Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2005-06-20 16:36 CEST Last Modified: 2011-07-03 05:34 CEST ====================================================================== Summary: new 4.2.23 stable release announced Description: * Major changes in release 4.2.23 ** Documentation Changes The -L and -I options of xargs are currently incompatible (but should not be). Improved the documentation for -execdir and -okdir. ** Functional Changes to updatedb File names ending in \"/\" which are specified as an argument to --prunepaths (or in $PRUNEPATHS) don\'t work, so we now issue an error message if the user tries to do that. The obvious exception of course is \"/\" which does work and is not rejected. * Major changes in release 4.2.22 ** Security Fixes If a directory entry searched with \"find -L\" is a symbolic link to \".\", we no longer loop indefinitely. This problem affected find versions 4.2.19, 4.2.20 and 4.2.21. This problem allows users to make \"find\" loop indefinitely. This is in effect a denial of service and could be used to prevent updates to the locate database or to defeat file security checks based on find. However, it should be noted that in any case you should not use \"find -L\" in security-sensitive scenarios. ** Other Bug Fixes None in this release. ** Functional Changes to locate A locate database can now be supplied on stdin, using \'-\' as a element of the database-path. If more than one database-path element is \'-\', later instances are ignored. A new option to locate, \'--all\' (\'-A\') causes matches to be limited to entries which match all given patterns, not entries which match one or more patterns. ** Documentation Changes Some typos in the manual pages have been fixed. Various parts of the manual now point out that it is good practice to quote the argument of \"-name\". The manpage now has a \"NON-BUGS\" section which explains some symptoms that look like bugs but aren\'t. The explanations of the \"%k\" and \"%b\" directives to \"find -printf\" have been imrpoved. * Major changes in release 4.2.21 ** Functional Changes to find The GNU extension \"find ... -perm +MODE\" has been withdrawn because it is incompatible with POSIX in obscure cases like \"find ... -perm ++r\". Use the new syntax \"find ... -perm /MODE\" instead. Old usages will still continue to work, so long as they don\'t conflict with POSIX. If the output is going to a terminal, the -print, -fprint, -printf and -fprintf actions now quote \"unusual\" characters to prevent unwanted effects on the terminal. See \"Unusual Characters in File Names\" for further details. There is no change to the behaviour when the output is not going to a terminal. The locate program does the same thing, unless the -0 option is in effect (in which case the filenames are printed as-is). ** Functional Changes to locate The locate command will now read each locate database at most once. This means that if you are using multiple databases and are searching for more than one name, the results will now be printed in a different order (and if you specified a small limit with --limit, you may get a different set of results). A new option \'--print\' for locate causes it to print the matching results even if the \'--count\' or \'--statistics\' option is in effect. ** Bug Fixes find /blah/blah/blah -depth -empty now works once again. The -regex and -iregex tests of find now correctly accept POSIX Basic Regular Expressions. (Savannah bug https://www.opencsw.org/mantis/view.php?id=12999) The updatedb program now works on systems where \"su\" does not support the \"-s\" option, for example Solaris. ====================================================================== ---------------------------------------------------------------------- (0006397) car (reporter) - 2009-07-04 01:25 https://www.opencsw.org/mantis/view.php?id=1014#c6397 ---------------------------------------------------------------------- Done: 4.4.2 published. In truth, this bug could probably have been closed some time ago. From noreply at opencsw.org Sun Jul 3 09:44:25 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Jul 2011 09:44:25 +0200 Subject: [bug-notifications] [findutils 0001101]: gupdatedb mktemp and ! In-Reply-To: <794dd097874e7d36fe395c9dc0c1e15b> Message-ID: <854bd262a0306764781dcbe271fdb71f@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1101 ====================================================================== Reported By: james Assigned To: bwalton ====================================================================== Project: findutils Issue ID: 1101 Category: regular use Reproducibility: sometimes Severity: tweak Priority: normal Status: closed Resolution: no change required Fixed in Version: ====================================================================== Date Submitted: 2005-07-26 18:10 CEST Last Modified: 2011-07-03 09:44 CEST ====================================================================== Summary: gupdatedb mktemp and ! Description: This started as a request for mktemp but even with mktemp gupdatedb needs a tweak. Without CSWmktemp: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: mktemp: not found /opt/csw/bin/gupdatedb: !: not found Install CSWmktemp which is not in the findutils depend list and it still fails: $ gupdatedb --old-format Warning: future versions of findutils will shortly discontinue support for the old locate database format. /opt/csw/bin/gupdatedb: !: not found /opt/csw/bin/gupdatedb: !: not found becasue the ! is not /bin/sh, I guess the was written for a system that emulated sh with something else, probably bash. #!/bin/ksh at the top will fix it. ====================================================================== ---------------------------------------------------------------------- (0009177) bwalton (manager) - 2011-07-03 03:44 https://www.opencsw.org/mantis/view.php?id=1101#c9177 ---------------------------------------------------------------------- Yes it does. Sorry. I've updated the build recipe and will push an update soon. Thanks -Ben ---------------------------------------------------------------------- (0009178) james (developer) - 2011-07-03 09:44 https://www.opencsw.org/mantis/view.php?id=1101#c9178 ---------------------------------------------------------------------- Thanks. From noreply at opencsw.org Sun Jul 3 23:23:00 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Jul 2011 23:23:00 +0200 Subject: [bug-notifications] [apache2 0004793]: Apache2 init script doesn't support use of different config file In-Reply-To: <47c4c67e4b3a89de7ea65ab7d7860cc2> Message-ID: <3bc414dcb3d5c9fc4a1ee2f71efbece9@www.opencsw.org> The issue 0003773 has been set as DUPLICATE OF the following issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4793 ====================================================================== Reported By: AirOnSkin Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 4793 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-06-24 01:33 CEST Last Modified: 2011-07-03 23:23 CEST ====================================================================== Summary: Apache2 init script doesn't support use of different config file Description: The OpenCSW Apache2 init script under /etc/opt/csw/init.d/cswapache2 does not support starting the server with a different config file defined with variable CONF_FILE. The CONF_FILE variable is only used to test if the apache config exists and is a regular file. Editing the last line in the script and changing it from: exec $APACHECTL -k $cmd 2>&1 to exec $APACHECTL -f $CONF_FILE -k $cmd 2>&1 solves the problem. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0003773 svc method script does not use config f... ====================================================================== ---------------------------------------------------------------------- (0009134) bwalton (manager) - 2011-06-24 02:52 https://www.opencsw.org/mantis/view.php?id=4793#c9134 ---------------------------------------------------------------------- Change committed. I'll work to get some test packages ready... Thanks -Ben From noreply at opencsw.org Sun Jul 3 23:23:02 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 3 Jul 2011 23:23:02 +0200 Subject: [bug-notifications] [apache2 0003773]: svc method script does not use config file variable In-Reply-To: <89ce5efba8bdd5ca964c859d537c83b3> Message-ID: The following issue has been set as DUPLICATE OF issue 0004793. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3773 ====================================================================== Reported By: rogdavies Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 3773 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: won't fix Fixed in Version: ====================================================================== Date Submitted: 2009-07-22 10:24 CEST Last Modified: 2011-03-21 02:35 CET ====================================================================== Summary: svc method script does not use config file variable Description: The method script cswapache2, does not use the CONF_FILE variable to start apache. The 'cmd' variable require something like cmd="$cmd -f $CONF_FILE" set in 'start' and 'restart' ( I think ) ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0004793 Apache2 init script doesn't support use... ====================================================================== ---------------------------------------------------------------------- (0008546) bwalton (manager) - 2010-12-09 03:30 https://www.opencsw.org/mantis/view.php?id=3773#c8546 ---------------------------------------------------------------------- No feedback. From noreply at opencsw.org Mon Jul 4 03:08:25 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Jul 2011 03:08:25 +0200 Subject: [bug-notifications] [apache2 0004793]: Apache2 init script doesn't support use of different config file In-Reply-To: <47c4c67e4b3a89de7ea65ab7d7860cc2> Message-ID: <99d588217e342f9c66d5657d327db8d5@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4793 ====================================================================== Reported By: AirOnSkin Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 4793 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-06-24 01:33 CEST Last Modified: 2011-07-04 03:08 CEST ====================================================================== Summary: Apache2 init script doesn't support use of different config file Description: The OpenCSW Apache2 init script under /etc/opt/csw/init.d/cswapache2 does not support starting the server with a different config file defined with variable CONF_FILE. The CONF_FILE variable is only used to test if the apache config exists and is a regular file. Editing the last line in the script and changing it from: exec $APACHECTL -k $cmd 2>&1 to exec $APACHECTL -f $CONF_FILE -k $cmd 2>&1 solves the problem. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0003773 svc method script does not use config f... ====================================================================== ---------------------------------------------------------------------- (0009179) bwalton (manager) - 2011-07-04 03:08 https://www.opencsw.org/mantis/view.php?id=4793#c9179 ---------------------------------------------------------------------- Test packages available here: http://buildfarm.opencsw.org/experimental.html#apache2 From noreply at opencsw.org Mon Jul 4 04:01:07 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Jul 2011 04:01:07 +0200 Subject: [bug-notifications] [apache2 0004788]: apache2 is missing perl as dependency In-Reply-To: <79e83cb79a99cb916089b243c78e4d82> Message-ID: <40624ee10dba0702379c921e413d2ee1@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4788 ====================================================================== Reported By: igalic Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 4788 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: confirmed ====================================================================== Date Submitted: 2011-06-20 18:33 CEST Last Modified: 2011-07-04 04:01 CEST ====================================================================== Summary: apache2 is missing perl as dependency Description: When trying to install a2_modphp5 on a fresh system I'd get the following error: Do you want to continue with the installation of [y,n,?] y Installing ap2_modphp5 - The apache 2.2.x php5 module as ## Installing part 1 of 1. /opt/csw/apache2/etc/httpd.conf.bak /opt/csw/apache2/libexec/libphp5.so /opt/csw/share/doc/ap2_modphp5/license [ verifying class ] Modifying /opt/csw/apache2/ap2mod/php5 chroot: exec failed: No such file or directory pkgadd: ERROR: class action script did not complete successfully [ verifying class ] Copying sample config to /opt/csw/apache2/etc/extra/httpd-php5.conf [ verifying class ] ## Executing postinstall script. Adding Include for extra/http-php5.conf to httpd.conf NOTICE: mod_php5 is enabled in httpd.conf but the server was not restarted. Please examine your php5 configuration and restart apache. Installation of partially failed. pkgadd failed with exit code: 2 Exit from pkgutil and fix this issue first (recommended)? ([y],n) I've tracked this down to: root at atvp1uwamp021:~# chroot / /bin/bash root at atvp1uwamp021:/# cd / root at atvp1uwamp021:/# exec /opt/csw/apache2/sbin/apxs bash: /opt/csw/apache2/sbin/apxs: /opt/csw/bin/perl: bad interpreter: No such file or directory bash: /opt/csw/apache2/sbin/apxs: Error 0 root at atvp1uwamp021:/# ls -lahrt /opt/csw/bin/perl /opt/csw/bin/perl: No such file or directory root at atvp1uwamp021:/# ====================================================================== ---------------------------------------------------------------------- (0009180) bwalton (manager) - 2011-07-04 04:01 https://www.opencsw.org/mantis/view.php?id=4788#c9180 ---------------------------------------------------------------------- Packages for testing at: http://buildfarm.opencsw.org/experimental.html#apache2 From noreply at opencsw.org Mon Jul 4 04:02:18 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Jul 2011 04:02:18 +0200 Subject: [bug-notifications] [apache2c 0004320]: Split off an apache2 utilities package for tools like "ab" In-Reply-To: <09b03af1ae0c599081277e26cca5464b> Message-ID: <5228652fd1dba9b343cdf3724a3d8888@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4320 ====================================================================== Reported By: skayser Assigned To: bwalton ====================================================================== Project: apache2c Issue ID: 4320 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-03-04 18:03 CET Last Modified: 2011-07-04 04:02 CEST ====================================================================== Summary: Split off an apache2 utilities package for tools like "ab" Description: Currently, helpful tools which are in-dependent from apache itself, like the benchmarking tool "ab" are part of the core apache2c package (which pulls in apache itself). IMHO it would be useful to provide a package - like Debian has it with apache2-utils - that contains these tools and only depends on the portable apache runtime. http://packages.debian.org/lenny/apache2-utils ====================================================================== ---------------------------------------------------------------------- (0009181) bwalton (manager) - 2011-07-04 04:02 https://www.opencsw.org/mantis/view.php?id=4320#c9181 ---------------------------------------------------------------------- Test packages with new -utils split available at: http://buildfarm.opencsw.org/experimental.html#apache2 From noreply at opencsw.org Mon Jul 4 15:30:49 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 4 Jul 2011 15:30:49 +0200 Subject: [bug-notifications] [libcairo2 0004792]: Dependency broken after pkgutil -u (wireshark, xhcat and more) In-Reply-To: <187f3f6e0355365604081efbf2c312fa> Message-ID: <8cd9e82d68a58c8be22fc62b6babbe1c@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4792 ====================================================================== Reported By: arkanoid Assigned To: dam ====================================================================== Project: libcairo2 Issue ID: 4792 Category: regular use Reproducibility: have not tried Severity: block Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-06-23 12:42 CEST Last Modified: 2011-07-04 15:30 CEST ====================================================================== Summary: Dependency broken after pkgutil -u (wireshark, xhcat and more) Description: ld.so.1: [...]: fatal: relocation error: file /opt/csw/lib/sparcv8/libcairo.so.2: symbol pixman_image_composite32: referenced symbol not found ====================================================================== ---------------------------------------------------------------------- (0009182) dam (administrator) - 2011-07-04 15:30 https://www.opencsw.org/mantis/view.php?id=4792#c9182 ---------------------------------------------------------------------- Good to see the issue is revolved now. From noreply at opencsw.org Tue Jul 5 09:53:23 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Jul 2011 09:53:23 +0200 Subject: [bug-notifications] [easytag 0004800]: missing dependencie Message-ID: <123e6a4503bc9f7a0dbdc1107fad7f69@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4800 ====================================================================== Reported By: holzi Assigned To: ====================================================================== Project: easytag Issue ID: 4800 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-05 09:53 CEST Last Modified: 2011-07-05 09:53 CEST ====================================================================== Summary: missing dependencie Description: easytag needs libflac7 which it doesn't depend on anymore since flac now depends on libflac8. Should be rebuild totally anyway to fix the other dependencies. ====================================================================== From noreply at opencsw.org Tue Jul 5 10:29:46 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Jul 2011 10:29:46 +0200 Subject: [bug-notifications] [easytag 0004800]: missing dependencie In-Reply-To: <7bd01f8b50a6207544a7063521fc99de> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4800 ====================================================================== Reported By: holzi Assigned To: dam ====================================================================== Project: easytag Issue ID: 4800 Category: packaging Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-07-05 09:53 CEST Last Modified: 2011-07-05 10:29 CEST ====================================================================== Summary: missing dependencie Description: easytag needs libflac7 which it doesn't depend on anymore since flac now depends on libflac8. Should be rebuild totally anyway to fix the other dependencies. ====================================================================== From noreply at opencsw.org Tue Jul 5 10:31:44 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Jul 2011 10:31:44 +0200 Subject: [bug-notifications] [easytag 0004800]: missing dependencie In-Reply-To: <7bd01f8b50a6207544a7063521fc99de> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4800 ====================================================================== Reported By: holzi Assigned To: dam ====================================================================== Project: easytag Issue ID: 4800 Category: packaging Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-07-05 09:53 CEST Last Modified: 2011-07-05 10:31 CEST ====================================================================== Summary: missing dependencie Description: easytag needs libflac7 which it doesn't depend on anymore since flac now depends on libflac8. Should be rebuild totally anyway to fix the other dependencies. ====================================================================== ---------------------------------------------------------------------- (0009183) dam (administrator) - 2011-07-05 10:31 https://www.opencsw.org/mantis/view.php?id=4800#c9183 ---------------------------------------------------------------------- I am adding dependencies from CSWflac to CSWlibflac4 and CSWlibflac7 as there are quite some packages still depending on these: libFLAC.so.4 kdemultimedia_gcc libFLAC.so.4 rhythmbox libFLAC.so.4 scummvm libFLAC.so.4 vlc libFLAC.so.7 easytag libFLAC.so.7 gstplugins_good libFLAC.so.7 gtkpod libFLAC.so.7 libxine libFLAC.so.7 sdlsound From noreply at opencsw.org Tue Jul 5 11:06:55 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 5 Jul 2011 11:06:55 +0200 Subject: [bug-notifications] [easytag 0004800]: missing dependencie In-Reply-To: <7bd01f8b50a6207544a7063521fc99de> Message-ID: <56851aec5e125c515635988e180d0622@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4800 ====================================================================== Reported By: holzi Assigned To: dam ====================================================================== Project: easytag Issue ID: 4800 Category: packaging Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-07-05 09:53 CEST Last Modified: 2011-07-05 11:06 CEST ====================================================================== Summary: missing dependencie Description: easytag needs libflac7 which it doesn't depend on anymore since flac now depends on libflac8. Should be rebuild totally anyway to fix the other dependencies. ====================================================================== ---------------------------------------------------------------------- (0009184) dam (administrator) - 2011-07-05 11:06 https://www.opencsw.org/mantis/view.php?id=4800#c9184 ---------------------------------------------------------------------- Fixed in REV=2011.07.05 and released to unstable/. From noreply at opencsw.org Wed Jul 6 00:13:14 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Jul 2011 00:13:14 +0200 Subject: [bug-notifications] [easytag 0004801]: broken flac dependency Message-ID: <8887e897e2c98207a37f4f9b2701a223@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4801 ====================================================================== Reported By: jdoe Assigned To: ====================================================================== Project: easytag Issue ID: 4801 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-06 00:13 CEST Last Modified: 2011-07-06 00:13 CEST ====================================================================== Summary: broken flac dependency Description: Since the FLAC version bump the current easytag package has broken dependencies. Easytag depends on FLAC but is linked against libFLAC.so.7 and FLAC provides libflac8 as a dep now. I believe the fix is just to update the deps to call for libflac7 instead of/in addition to FLAC, or for the package to be rebuilt against the new lib. ====================================================================== From noreply at opencsw.org Wed Jul 6 00:17:47 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Jul 2011 00:17:47 +0200 Subject: [bug-notifications] [easytag 0004801]: broken flac dependency In-Reply-To: <2348a2e4eb1703624b765192fe052472> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4801 ====================================================================== Reported By: jdoe Assigned To: dam ====================================================================== Project: easytag Issue ID: 4801 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-07-06 00:13 CEST Last Modified: 2011-07-06 00:17 CEST ====================================================================== Summary: broken flac dependency Description: Since the FLAC version bump the current easytag package has broken dependencies. Easytag depends on FLAC but is linked against libFLAC.so.7 and FLAC provides libflac8 as a dep now. I believe the fix is just to update the deps to call for libflac7 instead of/in addition to FLAC, or for the package to be rebuilt against the new lib. ====================================================================== From noreply at opencsw.org Wed Jul 6 00:18:06 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Jul 2011 00:18:06 +0200 Subject: [bug-notifications] [easytag 0004801]: broken flac dependency In-Reply-To: <2348a2e4eb1703624b765192fe052472> Message-ID: <4f7f6af19c0e982aaad187c9afd46c71@www.opencsw.org> The following issue has been set as DUPLICATE OF issue 0004800. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4801 ====================================================================== Reported By: jdoe Assigned To: dam ====================================================================== Project: easytag Issue ID: 4801 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-07-06 00:13 CEST Last Modified: 2011-07-06 00:18 CEST ====================================================================== Summary: broken flac dependency Description: Since the FLAC version bump the current easytag package has broken dependencies. Easytag depends on FLAC but is linked against libFLAC.so.7 and FLAC provides libflac8 as a dep now. I believe the fix is just to update the deps to call for libflac7 instead of/in addition to FLAC, or for the package to be rebuilt against the new lib. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0004800 missing dependencie ====================================================================== From noreply at opencsw.org Wed Jul 6 00:18:07 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 6 Jul 2011 00:18:07 +0200 Subject: [bug-notifications] [easytag 0004800]: missing dependencie In-Reply-To: <7bd01f8b50a6207544a7063521fc99de> Message-ID: The issue 0004801 has been set as DUPLICATE OF the following issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4800 ====================================================================== Reported By: holzi Assigned To: dam ====================================================================== Project: easytag Issue ID: 4800 Category: packaging Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-07-05 09:53 CEST Last Modified: 2011-07-05 11:06 CEST ====================================================================== Summary: missing dependencie Description: easytag needs libflac7 which it doesn't depend on anymore since flac now depends on libflac8. Should be rebuild totally anyway to fix the other dependencies. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0004801 broken flac dependency ====================================================================== ---------------------------------------------------------------------- (0009184) dam (administrator) - 2011-07-05 11:06 https://www.opencsw.org/mantis/view.php?id=4800#c9184 ---------------------------------------------------------------------- Fixed in REV=2011.07.05 and released to unstable/. From noreply at opencsw.org Thu Jul 7 11:50:14 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Jul 2011 11:50:14 +0200 Subject: [bug-notifications] [aspell 0004802]: Warning about invalid words during installation of aspellfr Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4802 ====================================================================== Reported By: AirOnSkin Assigned To: ====================================================================== Project: aspell Issue ID: 4802 Category: packaging Reproducibility: have not tried Severity: trivial Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-07 11:50 CEST Last Modified: 2011-07-07 11:50 CEST ====================================================================== Summary: Warning about invalid words during installation of aspellfr Description: When installing aspellfr there are two warnings displayed: Warning: The word "Gram--Schmidt" is invalid. The character '-' (U+2D) must be followed by an alphabetic character. Skipping word. Warning: The word "Runge--Kutta" is invalid. The character '-' (U+2D) must be followed by an alphabetic character. Skipping word. However the installation completes successfully. ====================================================================== From noreply at opencsw.org Thu Jul 7 13:25:07 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 7 Jul 2011 13:25:07 +0200 Subject: [bug-notifications] [mysql5 0004798]: mysql_secure_installation returns error with current mysql5 package In-Reply-To: <19f5b3fb53d5338cbb8370c8f65d5eb9> Message-ID: <7f40eaf95ec28cebf0e9f69a427b007e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4798 ====================================================================== Reported By: AirOnSkin Assigned To: ====================================================================== Project: mysql5 Issue ID: 4798 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-06-30 11:45 CEST Last Modified: 2011-07-07 13:25 CEST ====================================================================== Summary: mysql_secure_installation returns error with current mysql5 package Description: After installing mysql5 and running mysql_secure_installation the script breaks at the second action (removing anonymous user) because the first action (setting the root password) doesn't work. The new root password doesn't get applied (even if the output says so), hence the script has no rights for the second action. After typing the new root password twice the following appears (full log attached): Reloading privilege tables.. /opt/csw/mysql5/bin/sparcv9/mysql_secure_installation: !: not found ====================================================================== ---------------------------------------------------------------------- (0009186) AirOnSkin (reporter) - 2011-07-07 13:25 https://www.opencsw.org/mantis/view.php?id=4798#c9186 ---------------------------------------------------------------------- I've tested the issue on a freshly installed solaris and uploaded the log file (mysql-secure-install-extended.log). My experience: * There are 3 scripts on the system, they all behave the same. * All operations except setting the password work. If you start the script and choose to not change the root pw all other steps complete successfully. * When executing the script after a couple of minutes after I tried to change the root password (see try1-try3 in the log file) the script does not accept the default password (which is empty upon mysql installation) anymore. Instead the password I wanted to change the default to is being used (see try4 in the log file). Very strange oO I hope that helps. Cheers, Stefan From noreply at opencsw.org Fri Jul 8 11:03:41 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 8 Jul 2011 11:03:41 +0200 Subject: [bug-notifications] [libxslt 0004803]: Please depend on missing CSWlibgcrypt11 Message-ID: <9a001663d957a75477c9cb57ca8e9f2d@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4803 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: libxslt Issue ID: 4803 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-08 11:03 CEST Last Modified: 2011-07-08 11:03 CEST ====================================================================== Summary: Please depend on missing CSWlibgcrypt11 Description: Please depend on missing CSWlibgcrypt11: cc -xO3 -m32 -xarch=v8 -L/opt/csw/lib -L/opt/csw/lib -m32 -xarch=v8 -L/opt/csw/lib -o xml src/trans.o src/xml.o src/xml_C14N.o src/xml_depyx.o src/xml_edit.o src/xml_elem.o src/xml_escape.o src/xml_format.o src/xml_ls.o src/xml_pyx.o src/xml_select.o src/xml_trans.o src/xml_validate.o -lexslt -lxslt -lxml2 ld: warning: file libgcrypt.so.11: required by /opt/csw/lib/libexslt.so, not found Undefined first referenced symbol in file gcry_md_hash_buffer /opt/csw/lib/libexslt.so gcry_cipher_close /opt/csw/lib/libexslt.so gcry_cipher_open /opt/csw/lib/libexslt.so gcry_check_version /opt/csw/lib/libexslt.so gcry_strerror /opt/csw/lib/libexslt.so gcry_cipher_setkey /opt/csw/lib/libexslt.so gcry_cipher_decrypt /opt/csw/lib/libexslt.so gcry_cipher_encrypt /opt/csw/lib/libexslt.so ====================================================================== From noreply at opencsw.org Fri Jul 8 14:26:46 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 8 Jul 2011 14:26:46 +0200 Subject: [bug-notifications] [gawk 0004427]: Please upgrade to 3.1.8 In-Reply-To: <7935873c5a21df3ed1bd61920dc703b2> Message-ID: <61fc45eb29088b86cd4d5a5e54f0751c@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4427 ====================================================================== Reported By: dam Assigned To: philadmin ====================================================================== Project: gawk Issue ID: 4427 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-05-26 09:54 CEST Last Modified: 2011-07-08 14:26 CEST ====================================================================== Summary: Please upgrade to 3.1.8 Description: Please upgrade to 3.1.8 as released from sfw ====================================================================== ---------------------------------------------------------------------- (0009187) dam (administrator) - 2011-07-08 14:26 https://www.opencsw.org/mantis/view.php?id=4427#c9187 ---------------------------------------------------------------------- Fixed with 4.0.0,REV=2011.07.02 and released to current/. From noreply at opencsw.org Fri Jul 8 14:27:31 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 8 Jul 2011 14:27:31 +0200 Subject: [bug-notifications] [gawk 0004501]: gawk linked against old libsigsegv In-Reply-To: <16206b7e52b09f009efde8051ffb2af1> Message-ID: <2affab089a3ac924d569ae11c57ede5c@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4501 ====================================================================== Reported By: flod Assigned To: dam ====================================================================== Project: gawk Issue ID: 4501 Category: regular use Reproducibility: always Severity: block Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-07-29 06:51 CEST Last Modified: 2011-07-08 14:27 CEST ====================================================================== Summary: gawk linked against old libsigsegv Description: gawk is linked against the old libsigsegv.so.0 , which is no longer provided. ====================================================================== ---------------------------------------------------------------------- (0009188) dam (administrator) - 2011-07-08 14:27 https://www.opencsw.org/mantis/view.php?id=4501#c9188 ---------------------------------------------------------------------- Fixed in 4.0.0,REV=2011.07.02 and released to unstable/. From noreply at opencsw.org Fri Jul 8 22:33:33 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 8 Jul 2011 22:33:33 +0200 Subject: [bug-notifications] [gawk 0004804]: awk is not grep Message-ID: <9bff8ac9475b0175ae881be0da9f8ca5@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4804 ====================================================================== Reported By: flod Assigned To: ====================================================================== Project: gawk Issue ID: 4804 Category: packaging Reproducibility: always Severity: trivial Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-08 22:33 CEST Last Modified: 2011-07-08 22:33 CEST ====================================================================== Summary: awk is not grep Description: The description field for CSWgawk is "GNU grep". pkginfo -l CSWgawk PKGINST: CSWgawk NAME: gawk - GNU grep [...] curl -s http://www.opencsw.org/packages/CSWgawk/ | grep grep DescriptionGNU grep ====================================================================== From noreply at opencsw.org Sat Jul 9 09:33:10 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 9 Jul 2011 09:33:10 +0200 Subject: [bug-notifications] [gawk 0004804]: awk is not grep In-Reply-To: Message-ID: <3e8e157c1c2041ee6f46c6363973b49e@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4804 ====================================================================== Reported By: flod Assigned To: dam ====================================================================== Project: gawk Issue ID: 4804 Category: packaging Reproducibility: always Severity: trivial Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-07-08 22:33 CEST Last Modified: 2011-07-09 09:33 CEST ====================================================================== Summary: awk is not grep Description: The description field for CSWgawk is "GNU grep". pkginfo -l CSWgawk PKGINST: CSWgawk NAME: gawk - GNU grep [...] curl -s http://www.opencsw.org/packages/CSWgawk/ | grep grep DescriptionGNU grep ====================================================================== From noreply at opencsw.org Sat Jul 9 10:43:35 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 9 Jul 2011 10:43:35 +0200 Subject: [bug-notifications] [gawk 0004804]: awk is not grep In-Reply-To: Message-ID: <98cf473904310e4425eee2d1069c9519@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4804 ====================================================================== Reported By: flod Assigned To: dam ====================================================================== Project: gawk Issue ID: 4804 Category: packaging Reproducibility: always Severity: trivial Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-07-08 22:33 CEST Last Modified: 2011-07-09 10:43 CEST ====================================================================== Summary: awk is not grep Description: The description field for CSWgawk is "GNU grep". pkginfo -l CSWgawk PKGINST: CSWgawk NAME: gawk - GNU grep [...] curl -s http://www.opencsw.org/packages/CSWgawk/ | grep grep DescriptionGNU grep ====================================================================== ---------------------------------------------------------------------- (0009189) dam (administrator) - 2011-07-09 10:43 https://www.opencsw.org/mantis/view.php?id=4804#c9189 ---------------------------------------------------------------------- *Facepalm* Fixed in 4.0.0,REV=2011.07.09 and released to unstable/. From noreply at opencsw.org Sat Jul 9 20:36:31 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 9 Jul 2011 20:36:31 +0200 Subject: [bug-notifications] [libxslt 0004803]: Please depend on missing CSWlibgcrypt11 In-Reply-To: <38fcc66dd4757e0f3c7629dbc6e36c3e> Message-ID: <81a23310d9034ca24e167b6ffd77e011@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4803 ====================================================================== Reported By: dam Assigned To: bwalton ====================================================================== Project: libxslt Issue ID: 4803 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-07-08 11:03 CEST Last Modified: 2011-07-09 20:36 CEST ====================================================================== Summary: Please depend on missing CSWlibgcrypt11 Description: Please depend on missing CSWlibgcrypt11: cc -xO3 -m32 -xarch=v8 -L/opt/csw/lib -L/opt/csw/lib -m32 -xarch=v8 -L/opt/csw/lib -o xml src/trans.o src/xml.o src/xml_C14N.o src/xml_depyx.o src/xml_edit.o src/xml_elem.o src/xml_escape.o src/xml_format.o src/xml_ls.o src/xml_pyx.o src/xml_select.o src/xml_trans.o src/xml_validate.o -lexslt -lxslt -lxml2 ld: warning: file libgcrypt.so.11: required by /opt/csw/lib/libexslt.so, not found Undefined first referenced symbol in file gcry_md_hash_buffer /opt/csw/lib/libexslt.so gcry_cipher_close /opt/csw/lib/libexslt.so gcry_cipher_open /opt/csw/lib/libexslt.so gcry_check_version /opt/csw/lib/libexslt.so gcry_strerror /opt/csw/lib/libexslt.so gcry_cipher_setkey /opt/csw/lib/libexslt.so gcry_cipher_decrypt /opt/csw/lib/libexslt.so gcry_cipher_encrypt /opt/csw/lib/libexslt.so ====================================================================== From noreply at opencsw.org Sat Jul 9 20:37:03 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 9 Jul 2011 20:37:03 +0200 Subject: [bug-notifications] [libxslt 0004803]: Please depend on missing CSWlibgcrypt11 In-Reply-To: <38fcc66dd4757e0f3c7629dbc6e36c3e> Message-ID: <6f425cc3a3b1a347477861f3ae41dc8b@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4803 ====================================================================== Reported By: dam Assigned To: bwalton ====================================================================== Project: libxslt Issue ID: 4803 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-07-08 11:03 CEST Last Modified: 2011-07-09 20:37 CEST ====================================================================== Summary: Please depend on missing CSWlibgcrypt11 Description: Please depend on missing CSWlibgcrypt11: cc -xO3 -m32 -xarch=v8 -L/opt/csw/lib -L/opt/csw/lib -m32 -xarch=v8 -L/opt/csw/lib -o xml src/trans.o src/xml.o src/xml_C14N.o src/xml_depyx.o src/xml_edit.o src/xml_elem.o src/xml_escape.o src/xml_format.o src/xml_ls.o src/xml_pyx.o src/xml_select.o src/xml_trans.o src/xml_validate.o -lexslt -lxslt -lxml2 ld: warning: file libgcrypt.so.11: required by /opt/csw/lib/libexslt.so, not found Undefined first referenced symbol in file gcry_md_hash_buffer /opt/csw/lib/libexslt.so gcry_cipher_close /opt/csw/lib/libexslt.so gcry_cipher_open /opt/csw/lib/libexslt.so gcry_check_version /opt/csw/lib/libexslt.so gcry_strerror /opt/csw/lib/libexslt.so gcry_cipher_setkey /opt/csw/lib/libexslt.so gcry_cipher_decrypt /opt/csw/lib/libexslt.so gcry_cipher_encrypt /opt/csw/lib/libexslt.so ====================================================================== ---------------------------------------------------------------------- (0009190) bwalton (manager) - 2011-07-09 20:37 https://www.opencsw.org/mantis/view.php?id=4803#c9190 ---------------------------------------------------------------------- Updated packages pushed to unstable. -Ben From noreply at opencsw.org Sun Jul 10 12:03:52 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 10 Jul 2011 12:03:52 +0200 Subject: [bug-notifications] [tmux 0004694]: tmux doesn't work on Solaris 10 In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4694 ====================================================================== Reported By: trygvis Assigned To: dam ====================================================================== Project: tmux Issue ID: 4694 Category: packaging Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-02-23 10:28 CET Last Modified: 2011-07-10 12:03 CEST ====================================================================== Summary: tmux doesn't work on Solaris 10 Description: Command output: $ tmux [warn] ioctl: DP_POLL: Invalid argument $ Truss output attached. ====================================================================== ---------------------------------------------------------------------- (0009191) dam (administrator) - 2011-07-10 12:03 https://www.opencsw.org/mantis/view.php?id=4694#c9191 ---------------------------------------------------------------------- New upstream version tmux 1.5 is available with lots of fixed bugs. Please try from http://buildfarm.opencsw.org/experimental.html#tmux From noreply at opencsw.org Sun Jul 10 14:47:57 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 10 Jul 2011 14:47:57 +0200 Subject: [bug-notifications] [cswclassutils 0004063]: RFE: CAS for adding/removing entries to/from /etc/shells In-Reply-To: <29abfbf355e252388a6b049029c59718> Message-ID: <2b8eb7c83bb19b7f88d38304f752eafb@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4063 ====================================================================== Reported By: skayser Assigned To: bwalton ====================================================================== Project: cswclassutils Issue ID: 4063 Category: regular use Reproducibility: N/A Severity: feature Priority: low Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-12-02 16:17 CET Last Modified: 2011-07-10 14:47 CEST ====================================================================== Summary: RFE: CAS for adding/removing entries to/from /etc/shells Description: Could we get a CAS to handle /etc/shells entries. Currently bash, zsh, tcsh and maybe others employ their own postinstall/postremove scripts to do so. ====================================================================== ---------------------------------------------------------------------- (0009192) bwalton (manager) - 2011-07-10 14:47 https://www.opencsw.org/mantis/view.php?id=4063#c9192 ---------------------------------------------------------------------- CSWcas-etcshells was released to unstable. From noreply at opencsw.org Sun Jul 10 14:48:42 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 10 Jul 2011 14:48:42 +0200 Subject: [bug-notifications] [libxslt 0004803]: Please depend on missing CSWlibgcrypt11 In-Reply-To: <38fcc66dd4757e0f3c7629dbc6e36c3e> Message-ID: <8be3964105400bd6010322c42141bc75@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4803 ====================================================================== Reported By: dam Assigned To: bwalton ====================================================================== Project: libxslt Issue ID: 4803 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-07-08 11:03 CEST Last Modified: 2011-07-10 14:48 CEST ====================================================================== Summary: Please depend on missing CSWlibgcrypt11 Description: Please depend on missing CSWlibgcrypt11: cc -xO3 -m32 -xarch=v8 -L/opt/csw/lib -L/opt/csw/lib -m32 -xarch=v8 -L/opt/csw/lib -o xml src/trans.o src/xml.o src/xml_C14N.o src/xml_depyx.o src/xml_edit.o src/xml_elem.o src/xml_escape.o src/xml_format.o src/xml_ls.o src/xml_pyx.o src/xml_select.o src/xml_trans.o src/xml_validate.o -lexslt -lxslt -lxml2 ld: warning: file libgcrypt.so.11: required by /opt/csw/lib/libexslt.so, not found Undefined first referenced symbol in file gcry_md_hash_buffer /opt/csw/lib/libexslt.so gcry_cipher_close /opt/csw/lib/libexslt.so gcry_cipher_open /opt/csw/lib/libexslt.so gcry_check_version /opt/csw/lib/libexslt.so gcry_strerror /opt/csw/lib/libexslt.so gcry_cipher_setkey /opt/csw/lib/libexslt.so gcry_cipher_decrypt /opt/csw/lib/libexslt.so gcry_cipher_encrypt /opt/csw/lib/libexslt.so ====================================================================== ---------------------------------------------------------------------- (0009193) bwalton (manager) - 2011-07-10 14:48 https://www.opencsw.org/mantis/view.php?id=4803#c9193 ---------------------------------------------------------------------- Package available from unstable. From noreply at opencsw.org Sun Jul 10 18:25:56 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 10 Jul 2011 18:25:56 +0200 Subject: [bug-notifications] [cas_cptemplates 0004762]: cswcptemplates doesn't set ownerships and file permissions In-Reply-To: <361326fefd2c7b9d7e7190460d80a310> Message-ID: <9f8b617c7b3878a60a9a312564a0bcb7@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4762 ====================================================================== Reported By: ja Assigned To: phil ====================================================================== Project: cas_cptemplates Issue ID: 4762 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-04-24 07:48 CEST Last Modified: 2011-07-10 18:25 CEST ====================================================================== Summary: cswcptemplates doesn't set ownerships and file permissions Description: cswcptemplates doesn't set the ownerships and file permissions given in pkgmap of the package. Instead the system defaults settings were used. ====================================================================== ---------------------------------------------------------------------- (0009194) ja (developer) - 2011-07-10 18:25 https://www.opencsw.org/mantis/view.php?id=4762#c9194 ---------------------------------------------------------------------- Sorry for my delay. I'm not very familiar with cas scripts, but I think, it's ok to look for the ownerships and permissions in install/contents, because the script is calling "pkgadm sync" some lines before, so the information should be there. In $src is stored only the filename of a temporary file used by the cas script. No information about ownerships and permissions. Regards, Juergen From noreply at opencsw.org Thu Jul 14 02:45:31 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 14 Jul 2011 02:45:31 +0200 Subject: [bug-notifications] [screen 0004805]: Please rename package to CSWscreen Message-ID: <22f260c030e9cf0382713c92696b0b64@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4805 ====================================================================== Reported By: bwalton Assigned To: ====================================================================== Project: screen Issue ID: 4805 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-14 02:45 CEST Last Modified: 2011-07-14 02:45 CEST ====================================================================== Summary: Please rename package to CSWscreen Description: It would be nice if the package name matched the catalog name. You could provide screen_stub/CSWscrn that depends on screen/CSWscreen to make the transition easy. Thanks -Ben ====================================================================== From noreply at opencsw.org Fri Jul 15 12:42:51 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 15 Jul 2011 12:42:51 +0200 Subject: [bug-notifications] [ggettext 0004806]: Header files should be moved from CSWggettext to CSWggettext-dev Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4806 ====================================================================== Reported By: marcus Assigned To: ====================================================================== Project: ggettext Issue ID: 4806 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-15 12:42 CEST Last Modified: 2011-07-15 12:42 CEST ====================================================================== Summary: Header files should be moved from CSWggettext to CSWggettext-dev Description: The package CSWggettext contains the files /opt/csw/include/gettext-po.h /opt/csw/include/libintl.h These are unusable without the corresponding .so symlinks, which are in CSWggettext-dev, and can cause problems by shadowing the system libintl.h. (The dependencies of CSWggettext pulls in libXXXX.so.X.Y.Z, but not libXXXX.so.) The header files should be moved to CSWggettext-dev. ====================================================================== From noreply at opencsw.org Sat Jul 16 23:52:33 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 16 Jul 2011 23:52:33 +0200 Subject: [bug-notifications] [ggettext 0004806]: Header files should be moved from CSWggettext to CSWggettext-dev In-Reply-To: <922a83250871f9355300289b20d02294> Message-ID: <772abcb2cb1aefd66a043a6a97c11c3d@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4806 ====================================================================== Reported By: marcus Assigned To: bwalton ====================================================================== Project: ggettext Issue ID: 4806 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-07-15 12:42 CEST Last Modified: 2011-07-16 23:52 CEST ====================================================================== Summary: Header files should be moved from CSWggettext to CSWggettext-dev Description: The package CSWggettext contains the files /opt/csw/include/gettext-po.h /opt/csw/include/libintl.h These are unusable without the corresponding .so symlinks, which are in CSWggettext-dev, and can cause problems by shadowing the system libintl.h. (The dependencies of CSWggettext pulls in libXXXX.so.X.Y.Z, but not libXXXX.so.) The header files should be moved to CSWggettext-dev. ====================================================================== From noreply at opencsw.org Sun Jul 17 02:08:10 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 17 Jul 2011 02:08:10 +0200 Subject: [bug-notifications] [cswutils 0004795]: No results matched the query for CatalogRelease In-Reply-To: <508595cdd4a6332de762a75084b6b73c> Message-ID: <4cf49213d5dd4e959298c509e1041fb8@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4795 ====================================================================== Reported By: igalic Assigned To: maciej ====================================================================== Project: cswutils Issue ID: 4795 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-06-24 22:11 CEST Last Modified: 2011-07-17 02:08 CEST ====================================================================== Summary: No results matched the query for CatalogRelease Description: when running make package on my machine I'll see: CRITICAL:root:Database schema version: 1, Application expects version: 7 WARNING:root:Old database schema detected. WARNING:root:Dropping and creating all tables. WARNING:root:Cache database is not up to date. Refreshing it. WARNING:root:Refreshing the database. It may take a long time, please be patient. WARNING:root:If you need a way to make it faster, please see: WARNING:root:http://wiki.opencsw.org/checkpkg#toc5 ....................................................................................................................................................... 100% |################################################################################################################################################################################################| INFO:root:Juicing the srv4 package stream files... 100% |################################################################################################################################################################################################| Traceback (most recent call last): File "gar//bin/checkpkg", line 179, in main() File "gar//bin/checkpkg", line 127, in main sqo_catrel = models.CatalogRelease.selectBy(name=options.catrel).getOne() File "/opt/csw/lib/python/site-packages/sqlobject/sresults.py", line 280, in getOne % self.sourceClass.__name__) sqlobject.main.SQLObjectNotFound: No results matched the query for CatalogRelease gmake: *** [pkgcheck] Error 2 ====================================================================== ---------------------------------------------------------------------- (0009196) maciej (developer) - 2011-07-17 02:08 https://www.opencsw.org/mantis/view.php?id=4795#c9196 ---------------------------------------------------------------------- The patch is now submitted, it works fine. Information about CATALOG_RELEASE is now on the wiki. http://wiki.opencsw.org/checkpkg#toc4 From noreply at opencsw.org Tue Jul 19 15:16:26 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Jul 2011 15:16:26 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade Message-ID: <2c01cb345a4d93aac931d88427fc8542@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-19 15:16 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== From noreply at opencsw.org Tue Jul 19 18:44:46 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 19 Jul 2011 18:44:46 +0200 Subject: [bug-notifications] [perltidy 0004808]: Please update to Perl-Tidy-20101217 Message-ID: <3e4ca991ccb7baf64399a8c9b75e36aa@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4808 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: perltidy Issue ID: 4808 Category: upgrade Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-19 18:44 CEST Last Modified: 2011-07-19 18:44 CEST ====================================================================== Summary: Please update to Perl-Tidy-20101217 Description: Please update to Perl-Tidy-20101217. ====================================================================== From noreply at opencsw.org Thu Jul 21 16:52:45 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 16:52:45 +0200 Subject: [bug-notifications] [cyrus_imapd 0004753]: New version out In-Reply-To: Message-ID: <6d2099e13af7f70ed66d3dd7b3da91dc@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4753 ====================================================================== Reported By: ctw Assigned To: yann ====================================================================== Project: cyrus_imapd Issue ID: 4753 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-04-12 16:22 CEST Last Modified: 2011-07-21 16:52 CEST ====================================================================== Summary: New version out Description: Hi Cyrus-Imapd 2.4.7 is out and it corrects a lot of bugs found on 2.4.6. ====================================================================== ---------------------------------------------------------------------- (0009197) yann (manager) - 2011-07-21 16:52 https://www.opencsw.org/mantis/view.php?id=4753#c9197 ---------------------------------------------------------------------- cyrus imap 2.4.10 is available in my experimental repository. http://buildfarm.opencsw.org/experimental.html#yann pkgutil -t http://buildfarm.opencsw.org/opencsw/experimental/yann -i cyrus_imapd Could you try this package and give me some feedback ? From noreply at opencsw.org Thu Jul 21 16:54:02 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 16:54:02 +0200 Subject: [bug-notifications] [cyrus_imapd 0004724]: Skiplist DB problem In-Reply-To: <974bcd7e05c0a66e5ae56f20eaefb767> Message-ID: <55c534a7291b3269f20662d755f32b79@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4724 ====================================================================== Reported By: ctw Assigned To: yann ====================================================================== Project: cyrus_imapd Issue ID: 4724 Category: upgrade Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-03-09 12:12 CET Last Modified: 2011-07-21 16:54 CEST ====================================================================== Summary: Skiplist DB problem Description: Hi I've installed cyrusimapd 2.4.6 as an upgrade from 2.3.16. My system is Oracle Solaris 11 Express 2010.11. My db files are all skiplist. When i launch it i get the following errors : Mar 9 11:57:01 endor cyrus/imaps[7686]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3[7687]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3s[7688]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3[7683]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3s[7684]: [ID 864961 local6.crit] DBERROR: critical database situation cvt_cyrusdb refuses (in fact does nothing) to convert the .db files in any format. file doesn't recognises the files as 'Cyrus skiplist DB' : root at endor:/backend1/cyrus-config# file *.db annotations.db: data deliver.db: data mailboxes.db: data tls_sessions.db: data In fact i'm not sure if the problem comes from the package or from Solaris Express, i'm gonna install a Solaris 10 to be sure. ====================================================================== ---------------------------------------------------------------------- (0009198) yann (manager) - 2011-07-21 16:54 https://www.opencsw.org/mantis/view.php?id=4724#c9198 ---------------------------------------------------------------------- I can't reproduce your problem with Cyrus Imap 2.4.10. Have you made some more investigation under Solaris Express ? From noreply at opencsw.org Thu Jul 21 16:54:23 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 16:54:23 +0200 Subject: [bug-notifications] [cyrus_imapd 0004616]: Cyrus Imapd 2.4.5 In-Reply-To: Message-ID: <5c30b26adacdb6faaf0dc13d138879e8@www.opencsw.org> The following issue has been set as DUPLICATE OF issue 0004753. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4616 ====================================================================== Reported By: ctw Assigned To: yann ====================================================================== Project: cyrus_imapd Issue ID: 4616 Category: packaging Reproducibility: N/A Severity: feature Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-11-30 11:42 CET Last Modified: 2011-07-21 16:54 CEST ====================================================================== Summary: Cyrus Imapd 2.4.5 Description: Hi, Could you package this new version of Cyrus Imapd ? ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0004753 New version out ====================================================================== ---------------------------------------------------------------------- (0008616) yann (manager) - 2010-12-20 21:53 https://www.opencsw.org/mantis/view.php?id=4616#c8616 ---------------------------------------------------------------------- 2.4.6 is out, you will find in my repository instead of the 2.4.5 ones. From noreply at opencsw.org Thu Jul 21 16:54:24 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 16:54:24 +0200 Subject: [bug-notifications] [cyrus_imapd 0004753]: New version out In-Reply-To: Message-ID: <3167e682495e9978392ac23d6b072b92@www.opencsw.org> The issue 0004616 has been set as DUPLICATE OF the following issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4753 ====================================================================== Reported By: ctw Assigned To: yann ====================================================================== Project: cyrus_imapd Issue ID: 4753 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-04-12 16:22 CEST Last Modified: 2011-07-21 16:52 CEST ====================================================================== Summary: New version out Description: Hi Cyrus-Imapd 2.4.7 is out and it corrects a lot of bugs found on 2.4.6. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0004616 Cyrus Imapd 2.4.5 ====================================================================== ---------------------------------------------------------------------- (0009197) yann (manager) - 2011-07-21 16:52 https://www.opencsw.org/mantis/view.php?id=4753#c9197 ---------------------------------------------------------------------- cyrus imap 2.4.10 is available in my experimental repository. http://buildfarm.opencsw.org/experimental.html#yann pkgutil -t http://buildfarm.opencsw.org/opencsw/experimental/yann -i cyrus_imapd Could you try this package and give me some feedback ? From noreply at opencsw.org Thu Jul 21 16:55:50 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 16:55:50 +0200 Subject: [bug-notifications] [cyrus_imapd 0004616]: Cyrus Imapd 2.4.5 In-Reply-To: Message-ID: <59e147c4137b9d94e08b1c07adc33653@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4616 ====================================================================== Reported By: ctw Assigned To: yann ====================================================================== Project: cyrus_imapd Issue ID: 4616 Category: packaging Reproducibility: N/A Severity: feature Priority: normal Status: closed Resolution: duplicate Duplicate: 0 Fixed in Version: ====================================================================== Date Submitted: 2010-11-30 11:42 CET Last Modified: 2011-07-21 16:55 CEST ====================================================================== Summary: Cyrus Imapd 2.4.5 Description: Hi, Could you package this new version of Cyrus Imapd ? ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0004753 New version out ====================================================================== ---------------------------------------------------------------------- (0009199) yann (manager) - 2011-07-21 16:55 https://www.opencsw.org/mantis/view.php?id=4616#c9199 ---------------------------------------------------------------------- You also opened bug https://www.opencsw.org/mantis/view.php?id=4753 for a more recent version so I will consider this bug a duplicate and close it. You can follow the release of the last package in the ticket https://www.opencsw.org/mantis/view.php?id=4573. From noreply at opencsw.org Thu Jul 21 17:01:45 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:01:45 +0200 Subject: [bug-notifications] [openssh 0004670]: installation error In-Reply-To: <073b18899da2554ee7e0ce0f4c6fb7cd> Message-ID: <5b1abe8231dfd5516c567eca7774883b@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4670 ====================================================================== Reported By: pfelecan Assigned To: yann ====================================================================== Project: openssh Issue ID: 4670 Category: packaging Reproducibility: have not tried Severity: major Priority: normal Status: closed Resolution: duplicate Duplicate: 0 Fixed in Version: ====================================================================== Date Submitted: 2011-01-17 13:36 CET Last Modified: 2011-07-21 17:01 CEST ====================================================================== Summary: installation error Description: Durring an upgrade of a quite ancient system (SPARC) Solaris 10 the installation fails with the following messages: => Installing CSWossh-5.4p1,REV=2010.03.25 (178/238) ... Please see /opt/csw/share/doc/openssh/license for license information. Restoring /etc/opt/csw/preserve/CSWossh/moduli Restoring /etc/opt/csw/preserve/CSWossh/sshd_config Installing class ... cp: cannot create /etc/opt/csw/init.d/cswopenssh: No such file or directory pkgadd: ERROR: class action script did not complete successfully ERROR: attribute verification of failed pathname does not exist Installation of partially failed. The previous ossh version was 5.3p1,REV=2009.12.16 ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0004635 NRPE package fails to install if /opt/c... ====================================================================== ---------------------------------------------------------------------- (0009200) yann (manager) - 2011-07-21 17:01 https://www.opencsw.org/mantis/view.php?id=4670#c9200 ---------------------------------------------------------------------- Since this problem is related to cswclassutils, I am closing this bug as another one exists about this problem: https://www.opencsw.org/mantis/view.php?id=4635 From noreply at opencsw.org Thu Jul 21 17:03:04 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:03:04 +0200 Subject: [bug-notifications] [openssh 0004772]: Please upgrade to 5.8p2 In-Reply-To: Message-ID: <79cbf8ae78770e5e417fcac3a398e901@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4772 ====================================================================== Reported By: dam Assigned To: yann ====================================================================== Project: openssh Issue ID: 4772 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-05-24 10:00 CEST Last Modified: 2011-07-21 17:03 CEST ====================================================================== Summary: Please upgrade to 5.8p2 Description: Please upgrade to 5.8p2 ====================================================================== ---------------------------------------------------------------------- (0009201) yann (manager) - 2011-07-21 17:03 https://www.opencsw.org/mantis/view.php?id=4772#c9201 ---------------------------------------------------------------------- openssh 5.8p2 is available in my experimental repository: http://buildfarm.opencsw.org/experimental.html#yann feedback are welcome From noreply at opencsw.org Thu Jul 21 17:04:12 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:04:12 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade In-Reply-To: <254de4b7fd40f8c40e1a413283393bb0> Message-ID: <5f35fe9b2d9abf3f23160555cab8140c@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: yann ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-21 17:04 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== ---------------------------------------------------------------------- (0009202) yann (manager) - 2011-07-21 17:04 https://www.opencsw.org/mantis/view.php?id=4807#c9202 ---------------------------------------------------------------------- I uploaded a new set of openssl package in my experimental repository: http://buildfarm.opencsw.org/experimental.html#yann The new openssl_rt package should fix your issue. Could you try theses packages and give me some feedback ? From noreply at opencsw.org Thu Jul 21 17:05:20 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:05:20 +0200 Subject: [bug-notifications] [screen 0004805]: Please rename package to CSWscreen In-Reply-To: Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4805 ====================================================================== Reported By: bwalton Assigned To: yann ====================================================================== Project: screen Issue ID: 4805 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-14 02:45 CEST Last Modified: 2011-07-21 17:05 CEST ====================================================================== Summary: Please rename package to CSWscreen Description: It would be nice if the package name matched the catalog name. You could provide screen_stub/CSWscrn that depends on screen/CSWscreen to make the transition easy. Thanks -Ben ====================================================================== ---------------------------------------------------------------------- (0009203) yann (manager) - 2011-07-21 17:05 https://www.opencsw.org/mantis/view.php?id=4805#c9203 ---------------------------------------------------------------------- A new renamed screen package is available in my experimental repository: http://buildfarm.opencsw.org/experimental.html#yann Could you try to upgrade to this package and give me some feedback ? From noreply at opencsw.org Thu Jul 21 17:07:25 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:07:25 +0200 Subject: [bug-notifications] [bash 0004776]: Please upgrade to 4.2 In-Reply-To: Message-ID: <8c1b5691a184dd940a0acb44a7ef32e4@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4776 ====================================================================== Reported By: dam Assigned To: yann ====================================================================== Project: bash Issue ID: 4776 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-05-26 14:55 CEST Last Modified: 2011-07-21 17:07 CEST ====================================================================== Summary: Please upgrade to 4.2 Description: Please upgrade to 4.2 ====================================================================== ---------------------------------------------------------------------- (0009204) yann (manager) - 2011-07-21 17:07 https://www.opencsw.org/mantis/view.php?id=4776#c9204 ---------------------------------------------------------------------- bash 4.2 with patch level 10 is available in my experimental repository. http://buildfarm.opencsw.org/experimental.html#yann It now depends on the new classutils package cas_etcshells soon to be released. Can you try it and give me some feedback ? From noreply at opencsw.org Thu Jul 21 17:13:49 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:13:49 +0200 Subject: [bug-notifications] [screen 0004805]: Please rename package to CSWscreen In-Reply-To: Message-ID: <84bb87539227a9fc0303c351971d1fa4@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4805 ====================================================================== Reported By: bwalton Assigned To: yann ====================================================================== Project: screen Issue ID: 4805 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-14 02:45 CEST Last Modified: 2011-07-21 17:13 CEST ====================================================================== Summary: Please rename package to CSWscreen Description: It would be nice if the package name matched the catalog name. You could provide screen_stub/CSWscrn that depends on screen/CSWscreen to make the transition easy. Thanks -Ben ====================================================================== ---------------------------------------------------------------------- (0009205) bwalton (developer) - 2011-07-21 17:13 https://www.opencsw.org/mantis/view.php?id=4805#c9205 ---------------------------------------------------------------------- Hi Yann, There is a standard mechanism in GAR to generate the empty transitional package. This will give you an empty screen_stub package, which we have chosen as the standard naming convention. (You chose _transitional.) To use this feature, simply add to your GAR recipe: OBSOLETED_BY_CSWscreen = CSWscrn CATALOG_NAME_CSWscrn = screen_stub Those two lines should be enough to do everything required. You'll get CSWscrn/screen_stub depending on CSWscreen/screen. Can you try this method? I'm happy to test the update as it stands for functionality though. Thanks -Ben From noreply at opencsw.org Thu Jul 21 17:17:13 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:17:13 +0200 Subject: [bug-notifications] [screen 0004805]: Please rename package to CSWscreen In-Reply-To: Message-ID: <27c6b9382ee07594a3ff1cf7d8e4a1d6@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4805 ====================================================================== Reported By: bwalton Assigned To: yann ====================================================================== Project: screen Issue ID: 4805 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-14 02:45 CEST Last Modified: 2011-07-21 17:17 CEST ====================================================================== Summary: Please rename package to CSWscreen Description: It would be nice if the package name matched the catalog name. You could provide screen_stub/CSWscrn that depends on screen/CSWscreen to make the transition easy. Thanks -Ben ====================================================================== ---------------------------------------------------------------------- (0009206) bwalton (developer) - 2011-07-21 17:17 https://www.opencsw.org/mantis/view.php?id=4805#c9206 ---------------------------------------------------------------------- The update does work and the new screen package runs the same as the old one as far as I can tell. From noreply at opencsw.org Thu Jul 21 17:17:20 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 17:17:20 +0200 Subject: [bug-notifications] [screen 0004805]: Please rename package to CSWscreen In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4805 ====================================================================== Reported By: bwalton Assigned To: yann ====================================================================== Project: screen Issue ID: 4805 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-14 02:45 CEST Last Modified: 2011-07-21 17:17 CEST ====================================================================== Summary: Please rename package to CSWscreen Description: It would be nice if the package name matched the catalog name. You could provide screen_stub/CSWscrn that depends on screen/CSWscreen to make the transition easy. Thanks -Ben ====================================================================== ---------------------------------------------------------------------- (0009207) yann (manager) - 2011-07-21 17:17 https://www.opencsw.org/mantis/view.php?id=4805#c9207 ---------------------------------------------------------------------- Hi Ben, Thanks for the information. I took the opportunity to use the transitional/stub package to put some postinstall code related to the migration of screen socket directory from /tmp/uscreens|screens to /var/opt/csw/run/screen Can I easily add a preinstall script using the automatic GAR mechanism for generating stub package ? From noreply at opencsw.org Thu Jul 21 18:10:52 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 21 Jul 2011 18:10:52 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade In-Reply-To: <254de4b7fd40f8c40e1a413283393bb0> Message-ID: <4e1abe462ba04e71f361522b7b42ff2a@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: yann ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-21 18:10 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== ---------------------------------------------------------------------- (0009208) domcleal (reporter) - 2011-07-21 18:10 https://www.opencsw.org/mantis/view.php?id=4807#c9208 ---------------------------------------------------------------------- Thanks for the quick response Yann. The issue's still there unfortunately. I see the method of migrating the certs has changed, but I think the issue might not be that. The error goes away when the /opt/csw/ssl/certs directory is not removed by the preinstall though, so should it not be doing this? # pkgutil --trace -t http://buildfarm.opencsw.org/opencsw/experimental/yann -y -u CSWosslrt [ snip ] + read FILE + dirname ./vsign3.pem + mkdir -p -m 0755 /opt/csw/etc/ssl/certs/. + mv ./vsign3.pem /opt/csw/etc/ssl/certs/./vsign3.pem + read FILE + find . ! -name . -type d -exec rmdir {} ; + rmdir /opt/csw/ssl/certs + true pkgadd: ERROR: unable to remove existing directory at Installation of failed (internal error) - package partially installed. pkgadd failed with exit code: 1 From noreply at opencsw.org Fri Jul 22 00:37:01 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 22 Jul 2011 00:37:01 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade In-Reply-To: <254de4b7fd40f8c40e1a413283393bb0> Message-ID: <856c814168a86b9a4db0f56e306ea31f@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: yann ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-22 00:37 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== ---------------------------------------------------------------------- (0009209) yann (manager) - 2011-07-22 00:37 https://www.opencsw.org/mantis/view.php?id=4807#c9209 ---------------------------------------------------------------------- Hi, The /opt/csw/ssl/certs should be removed so that pkgadd can create a symlink /opt/csw/ssl/certs -> /opt/csw/etc/ssl/certs It is perfectly normal that the /opt/csw/ssl/certs is removed. In fact, in there is no custom file installed in /opt/csw/ssl/certs, it should always be removed when the previous openssl_rt package is removed. See Demonstration 1. I am a bit surprised that removing the rmdir solves the problem. If I create custom files in /opt/csw/ssl/certs, I can't also reproduce your bug, see demonstration 2. So I suppose there is something specific in your configuration. The things that come to my mind are: - /opt/csw/ssl/certs is a mount point, - /opt/csw is zone shared. Could you give me more information about your setup so I understand the condition that trigger this bug ? Thanks in advance, Yann Demonstration 1: # pkginfo -l CSWosslrt | grep VERSION VERSION: 0.9.8,REV=2007.12.26_rev=g # ls -ld /opt/csw/ssl/certs drwxr-xr-x 4 root bin 1024 Jul 22 00:16 /opt/csw/ssl/certs # pkgrm CSWosslrt [...] # ls -ld /opt/csw/ssl/certs /opt/csw/ssl/certs: No such file or directory If the last openssl_rt is then installed, there is no problem: # pkgutil --trace -t http://buildfarm.opencsw.org/opencsw/experimental/yann -i openssl_rt [...] Installation of was successful. Demonstration 2: # # Let's create some custom files # cd /opt/csw/ssl/certs # mkdir -p demo expired # touch test1.pem demo/test2.pem expired/test3.pem # I also create demo and expired directory at the new location to create a clash (triggered a problem with the previous package). # mkdir -p /opt/csw/etc/ssl/certs/demo /opt/csw/etc/ssl/certs/expired # pkgrm CSWosslrt Removal of was successful. # ls -l /opt/csw/ssl/certs/ total 4 drwxr-xr-x 2 root bin 512 Jul 22 00:29 demo drwxr-xr-x 2 root bin 512 Jul 22 00:29 expired -rw-r--r-- 1 root root 0 Jul 22 00:27 test1.pem [...] ## Executing checkinstall script. + /usr/bin/uname -p PLATFORM=i386 + /usr/bin/uname -r VERSION=5.10 + [ 5.10 -eq 5.8 ] + [ ! -c /dev/random ] + [ ! -c /dev/urandom ] + [ = 1 ] + [ ! -h /opt/csw/ssl/certs ] + [ -d /opt/csw/ssl/certs ] + ls -1 /opt/csw/ssl/certs/ + [ -n demo expired test1.pem ] + echo Custom certificates have been installed in /opt/csw/ssl/certs/. Custom certificates have been installed in /opt/csw/ssl/certs/. + echo They will be moved under /opt/csw/etc/ssl/certs. They will be moved under /opt/csw/etc/ssl/certs. + echo see /opt/csw/share/doc/openssl_rt/README.CSW for more information see /opt/csw/share/doc/openssl_rt/README.CSW for more information + echo about CA. about CA. + cat MOVE_CERTS=Yes + exit 0 [...] ## Executing preinstall script. + [ Yes = Yes ] + cd /opt/csw/ssl/certs + [ 0 -eq 0 ] + pwd + [ /opt/csw/ssl/certs = /opt/csw/ssl/certs ] + find . -type f + read FILE + dirname ./demo/test2.pem + mkdir -p -m 0755 /opt/csw/etc/ssl/certs/./demo + mv ./demo/test2.pem /opt/csw/etc/ssl/certs/./demo/test2.pem + read FILE + dirname ./expired/test3.pem + mkdir -p -m 0755 /opt/csw/etc/ssl/certs/./expired + mv ./expired/test3.pem /opt/csw/etc/ssl/certs/./expired/test3.pem + read FILE + dirname ./test1.pem + mkdir -p -m 0755 /opt/csw/etc/ssl/certs/. + mv ./test1.pem /opt/csw/etc/ssl/certs/./test1.pem + read FILE + find . ! -name . -type d -exec rmdir {} ; + rmdir /opt/csw/ssl/certs + true [...] /opt/csw/ssl/certs [...] Installation of was successful. From noreply at opencsw.org Fri Jul 22 12:22:26 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 22 Jul 2011 12:22:26 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade In-Reply-To: <254de4b7fd40f8c40e1a413283393bb0> Message-ID: <0c7244a1da37340bde08ff87f52a5fa0@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: yann ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-22 12:22 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== ---------------------------------------------------------------------- (0009210) domcleal (reporter) - 2011-07-22 12:22 https://www.opencsw.org/mantis/view.php?id=4807#c9210 ---------------------------------------------------------------------- I don't think that it's a particular local configuration, but to do with the method. I'm using the pkgutil -u method to upgrade the package in-place. Looking under the covers at pkgutil, the pkgrm is failing as the admin file has rdepend=quit and other packages (CSWwget etc) are installed and depend on it. pkgutil continues and does the pkgadd (using instance=overwrite) while the old package remains on the system. Therefore the issue occurs if you perform a pkgadd over the existing package, using instance=overwrite. The pkgutil admin file looks like this: # cat /var/opt/csw/pkgutil/admin mail= instance=overwrite partial=quit runlevel=quit idepend=quit rdepend=quit space=quit setuid=nocheck conflict=nocheck action=nocheck basedir=default First install the old package: # ls -ld /opt/csw/etc/ssl/certs /opt/csw/ssl/certs /opt/csw/etc/ssl/certs: No such file or directory /opt/csw/ssl/certs: No such file or directory # pkgadd -n -a /var/opt/csw/pkgutil/admin -d openssl_rt-0.9.8\,REV\=2007.12.26_rev\=g-SunOS5.8-sparc-CSW.pkg CSWosslrt [snip] Installation of was successful. # pkginfo -x CSWosslrt CSWosslrt openssl_rt - Openssl runtime libraries (sparc) 0.9.8,REV=2007.12.26_rev=g # ls -ld /opt/csw/etc/ssl/certs /opt/csw/ssl/certs /opt/csw/etc/ssl/certs: No such file or directory drwxr-xr-x 4 root bin 34 Jul 22 11:11 /opt/csw/ssl/certs And then install the new package: # pkgadd -v -n -a /var/opt/csw/pkgutil/admin -d openssl_rt-0.9.8r\,REV\=2011.07.21-SunOS5.9-sparc-CSW.pkg CSWosslrt [snip] + rmdir /opt/csw/ssl/certs + true pkgadd: ERROR: unable to remove existing directory at Installation of failed (internal error) - package # ls -ld /opt/csw/etc/ssl/certs /opt/csw/ssl/certs /opt/csw/ssl/certs: No such file or directory drwxr-xr-x 4 root other 34 Jul 22 11:11 /opt/csw/etc/ssl/certs From noreply at opencsw.org Fri Jul 22 14:53:11 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 22 Jul 2011 14:53:11 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade In-Reply-To: <254de4b7fd40f8c40e1a413283393bb0> Message-ID: <919e26ea852c51fc1f8c3708138698f5@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: yann ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-22 14:53 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== ---------------------------------------------------------------------- (0009211) yann (manager) - 2011-07-22 14:53 https://www.opencsw.org/mantis/view.php?id=4807#c9211 ---------------------------------------------------------------------- Hi, I still don't reproduce the bug using directly pkgutil. # pkginfo -x CSWosslrt CSWosslrt openssl_rt - Openssl runtime libraries (i386) 0.9.8,REV=2007.12.26_rev=g # pkgutil -t http://buildfarm.opencsw.org/opencsw/experimental/yann -y -u openssl_rt [...] => Removing old version of CSWosslrt (1/1) ... Removal of was successful. => Installing CSWosslrt-0.9.8r,REV=2011.07.21 (1/1) ... Please see /opt/csw/share/doc/openssl_rt/license for license information. Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of was successful. The difference is in our admin file: # cat /var/opt/csw/pkgutil/admin mail= instance=overwrite partial=nocheck runlevel=nocheck idepend=nocheck rdepend=nocheck space=nocheck setuid=nocheck conflict=nocheck action=nocheck basedir=default I checked the 2.1,REV=2010.07.28 and the 2.4,REV=2011.05.15 versions, and the default provided admin files is identical to mine. Have you made some modification to your admin file ? From noreply at opencsw.org Fri Jul 22 17:50:46 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 22 Jul 2011 17:50:46 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade In-Reply-To: <254de4b7fd40f8c40e1a413283393bb0> Message-ID: <8bea14ab6c4545bbd49bcf51a37e7be0@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: yann ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-22 17:50 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== ---------------------------------------------------------------------- (0009212) domcleal (reporter) - 2011-07-22 17:50 https://www.opencsw.org/mantis/view.php?id=4807#c9212 ---------------------------------------------------------------------- That was it, thanks for spotting the difference. I wasn't aware that this had been changed in our environment. Having tested with your correct admin file, the upgrade works fine - removing the old package and standard certs, migrating custom certs and setting up the symlink without errors. Sorry for the unnecessary bug report. From noreply at opencsw.org Fri Jul 22 18:24:27 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 22 Jul 2011 18:24:27 +0200 Subject: [bug-notifications] [openssl_rt 0004807]: Migration of SSL certs fails on upgrade In-Reply-To: <254de4b7fd40f8c40e1a413283393bb0> Message-ID: <2ad7511364cdb83868cfb0704c41b8d5@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4807 ====================================================================== Reported By: domcleal Assigned To: yann ====================================================================== Project: openssl_rt Issue ID: 4807 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-07-19 15:16 CEST Last Modified: 2011-07-22 18:24 CEST ====================================================================== Summary: Migration of SSL certs fails on upgrade Description: When upgrading with pkgutil from openssl_rt-0.9.8,REV=2007.12.26_rev=g-SunOS5.8-sparc-CSW to openssl_rt-0.9.8r,REV=2011.02.12-SunOS5.9-sparc-CSW, the package preinstall performs a migration of SSL certs from /opt/csw/ssl/certs to /opt/csw/etc/ssl/certs. This causes the pkgadd to fail, as it also removes the /opt/csw/ssl/certs directory: Custom certificates have been installed in /opt/csw/ssl/certs/. They will be moved under /opt/csw/etc/ssl/certs. see /opt/csw/share/doc/openssl_rt/README.CSW for more information about CA. WARNING: /opt/csw/ssl/certs mv: cannot rename /opt/csw/ssl/certs/demo to /opt/csw/etc/ssl/certs/demo: File exists mv: cannot rename /opt/csw/ssl/certs/expired to /opt/csw/etc/ssl/certs/expired: File exists rmdir: directory "/opt/csw/ssl/certs": Directory not empty WARNING: /opt/csw/ssl/certs may not overwrite a populated directory. pkgadd: ERROR: /opt/csw/ssl/certs could not be installed. Updating certificates in /opt/csw/etc/ssl/certs...done. Installation of partially failed. Removing the "rmdir /opt/csw/ssl/certs" from the preinstall lets the upgrade go through, indicating perhaps that the directory should be left in place? ====================================================================== ---------------------------------------------------------------------- (0009213) yann (manager) - 2011-07-22 18:24 https://www.opencsw.org/mantis/view.php?id=4807#c9213 ---------------------------------------------------------------------- No problem, you also rose a corner case that I fixed with the new package. From noreply at opencsw.org Sun Jul 24 03:11:18 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 24 Jul 2011 03:11:18 +0200 Subject: [bug-notifications] [skencil 0004809]: Version 0.7.12 will not run Message-ID: <1258ca305d6ee7b70514a4cad2e0a80d@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4809 ====================================================================== Reported By: jeff Assigned To: ====================================================================== Project: skencil Issue ID: 4809 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-24 03:11 CEST Last Modified: 2011-07-24 03:11 CEST ====================================================================== Summary: Version 0.7.12 will not run Description: 1-> skencil Traceback (most recent call last): File "/opt/csw/bin/skencil", line 57, in Sketch.UI.main(sys.argv) File "/opt/csw/lib/skencil-cvs/Sketch/UI/__init__.py", line 231, in main from skapp import SketchApplication File "/opt/csw/lib/skencil-cvs/Sketch/UI/skapp.py", line 21, in import gtk, gtk.keysyms File "/opt/csw/lib/python/site-packages/gtk-2.0/gtk/__init__.py", line 48, in from gtk import _gtk ImportError: ld.so.1: python: fatal: relocation error: file /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so: symbol PyUnicodeUCS2_DecodeUTF8: referenced symbol not found 2->whence -v skencil skencil is a tracked alias for /opt/csw/bin/skencil ====================================================================== From noreply at opencsw.org Wed Jul 27 15:56:05 2011 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 27 Jul 2011 15:56:05 +0200 Subject: [bug-notifications] [xmms 0004810]: v1.2.11, REV=2011.06.14 segfaults when trying to play any file. Message-ID: <75fed8487c5dd6767f2a5ab208e9b1f0@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4810 ====================================================================== Reported By: rmf Assigned To: ====================================================================== Project: xmms Issue ID: 4810 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2011-07-27 15:56 CEST Last Modified: 2011-07-27 15:56 CEST ====================================================================== Summary: v1.2.11,REV=2011.06.14 segfaults when trying to play any file. Description: reved from 1.2.10 RES=2004.06.28 to current and xmms comes up, but crashes with segfault when trying to play a file. ======================================================================