From noreply at opencsw.org Fri May 3 15:08:38 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 3 May 2013 15:08:38 +0200 Subject: [bug-notifications] [amavisd_new 0004633]: pm_berkeley won't install In-Reply-To: <57a02bb283b51c9a296edbf4d78bb76f> Message-ID: <08dbc7aa465565ff31c616c76a47dc5a@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4633 ====================================================================== Reported By: dhe Assigned To: ihsan ====================================================================== Project: amavisd_new Issue ID: 4633 Category: packaging Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-12-15 17:51 CET Last Modified: 2013-05-03 15:08 CEST ====================================================================== Summary: pm_berkeley won't install Description: root at mailtest:[/opt/csw/bin]#pkgutil --install pm_berkeleydb Solving needed dependencies ... Solving dependency order ... Install 2 NEW packages: CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWpmberkeleydb-0.43,REV=2010.09.10 Install 1 UPDATED packages: CSWperl-5.10.1,REV=2010.08.11 2 CURRENT packages: CSWcommon-1.4.7,REV=2009.09.20 CSWgdbm-1.8.3,REV=2006.01.01 Total size: 13.7 MB 3 packages to fetch. Do you want to continue? [Y,n] y A local copy of CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 exists and is of matching size. A local copy of CSWperl-5.10.1,REV=2010.08.11 exists and is of matching size. Removing non-matching local file for CSWpmberkeleydb-0.43,REV=2010.09.10. => Fetching CSWpmberkeleydb-0.43,REV=2010.09.10 (3/3) ... --2010-12-15 11:48:41-- http://ibiblio.org/pub/packages/solaris/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz Resolving ibiblio.org... 152.46.7.80 Connecting to ibiblio.org|152.46.7.80|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://mirrors.ibiblio.org/pub/mirrors/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz [following] --2010-12-15 11:48:41-- http://mirrors.ibiblio.org/pub/mirrors/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz Resolving mirrors.ibiblio.org... 152.46.7.65 Connecting to mirrors.ibiblio.org|152.46.7.65|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2010-12-15 11:48:42 ERROR 404: Not Found. Fetching of CSWpmberkeleydb-0.43,REV=2010.09.10 failed. Try updating your catalog with pkgutil -U. root at mailtest:[/opt/csw/bin]# ====================================================================== ---------------------------------------------------------------------- (0008571) dam (administrator) - 2010-12-15 21:37 https://www.opencsw.org/mantis/view.php?id=4633#c8571 ---------------------------------------------------------------------- There is a newer package already released. It looks like ibiblio has not been updated in a couple of days: http://www.canoedissent.org.uk/mirror/status/ You can always use the primary mirror at http://mirror.opencsw.org/opencsw/current/ From noreply at opencsw.org Fri May 3 15:11:56 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 3 May 2013 15:11:56 +0200 Subject: [bug-notifications] [amavisd_new 0004633]: pm_berkeley won't install In-Reply-To: <57a02bb283b51c9a296edbf4d78bb76f> Message-ID: <522e9a740cedd34c9e23ba39d733d688@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4633 ====================================================================== Reported By: dhe Assigned To: ihsan ====================================================================== Project: amavisd_new Issue ID: 4633 Category: packaging Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-12-15 17:51 CET Last Modified: 2013-05-03 15:11 CEST ====================================================================== Summary: pm_berkeley won't install Description: root at mailtest:[/opt/csw/bin]#pkgutil --install pm_berkeleydb Solving needed dependencies ... Solving dependency order ... Install 2 NEW packages: CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWpmberkeleydb-0.43,REV=2010.09.10 Install 1 UPDATED packages: CSWperl-5.10.1,REV=2010.08.11 2 CURRENT packages: CSWcommon-1.4.7,REV=2009.09.20 CSWgdbm-1.8.3,REV=2006.01.01 Total size: 13.7 MB 3 packages to fetch. Do you want to continue? [Y,n] y A local copy of CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 exists and is of matching size. A local copy of CSWperl-5.10.1,REV=2010.08.11 exists and is of matching size. Removing non-matching local file for CSWpmberkeleydb-0.43,REV=2010.09.10. => Fetching CSWpmberkeleydb-0.43,REV=2010.09.10 (3/3) ... --2010-12-15 11:48:41-- http://ibiblio.org/pub/packages/solaris/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz Resolving ibiblio.org... 152.46.7.80 Connecting to ibiblio.org|152.46.7.80|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://mirrors.ibiblio.org/pub/mirrors/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz [following] --2010-12-15 11:48:41-- http://mirrors.ibiblio.org/pub/mirrors/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz Resolving mirrors.ibiblio.org... 152.46.7.65 Connecting to mirrors.ibiblio.org|152.46.7.65|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2010-12-15 11:48:42 ERROR 404: Not Found. Fetching of CSWpmberkeleydb-0.43,REV=2010.09.10 failed. Try updating your catalog with pkgutil -U. root at mailtest:[/opt/csw/bin]# ====================================================================== ---------------------------------------------------------------------- (0010369) ihsan (manager) - 2013-05-03 15:11 https://www.opencsw.org/mantis/view.php?id=4633#c10369 ---------------------------------------------------------------------- I've release 0.51 of the package. Please try the new version. From noreply at opencsw.org Fri May 3 15:12:57 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 3 May 2013 15:12:57 +0200 Subject: [bug-notifications] [amavisd_new 0004633]: pm_berkeley won't install In-Reply-To: <57a02bb283b51c9a296edbf4d78bb76f> Message-ID: <49bbf8b44f84573e9761357d693699de@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4633 ====================================================================== Reported By: dhe Assigned To: ihsan ====================================================================== Project: amavisd_new Issue ID: 4633 Category: packaging Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-12-15 17:51 CET Last Modified: 2013-05-03 15:12 CEST ====================================================================== Summary: pm_berkeley won't install Description: root at mailtest:[/opt/csw/bin]#pkgutil --install pm_berkeleydb Solving needed dependencies ... Solving dependency order ... Install 2 NEW packages: CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWpmberkeleydb-0.43,REV=2010.09.10 Install 1 UPDATED packages: CSWperl-5.10.1,REV=2010.08.11 2 CURRENT packages: CSWcommon-1.4.7,REV=2009.09.20 CSWgdbm-1.8.3,REV=2006.01.01 Total size: 13.7 MB 3 packages to fetch. Do you want to continue? [Y,n] y A local copy of CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 exists and is of matching size. A local copy of CSWperl-5.10.1,REV=2010.08.11 exists and is of matching size. Removing non-matching local file for CSWpmberkeleydb-0.43,REV=2010.09.10. => Fetching CSWpmberkeleydb-0.43,REV=2010.09.10 (3/3) ... --2010-12-15 11:48:41-- http://ibiblio.org/pub/packages/solaris/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz Resolving ibiblio.org... 152.46.7.80 Connecting to ibiblio.org|152.46.7.80|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://mirrors.ibiblio.org/pub/mirrors/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz [following] --2010-12-15 11:48:41-- http://mirrors.ibiblio.org/pub/mirrors/opencsw/current/i386/5.10/pm_berkeleydb-0.43,REV=2010.09.10-SunOS5.9-i386-CSW.pkg.gz Resolving mirrors.ibiblio.org... 152.46.7.65 Connecting to mirrors.ibiblio.org|152.46.7.65|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2010-12-15 11:48:42 ERROR 404: Not Found. Fetching of CSWpmberkeleydb-0.43,REV=2010.09.10 failed. Try updating your catalog with pkgutil -U. root at mailtest:[/opt/csw/bin]# ====================================================================== ---------------------------------------------------------------------- (0010370) ihsan (manager) - 2013-05-03 15:12 https://www.opencsw.org/mantis/view.php?id=4633#c10370 ---------------------------------------------------------------------- Closing this bug. Please "reopen" if it's still not fixed. From noreply at opencsw.org Sun May 5 11:08:26 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 11:08:26 +0200 Subject: [bug-notifications] [pidgin 0004469]: upgrade to 2.7, plus relink In-Reply-To: <6bfcf2a8f98a16dfc5ea391985296dfe> Message-ID: <5a57b32aa8606ceb70c74b78e5f2dc6c@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4469 ====================================================================== Reported By: phil Assigned To: laurent ====================================================================== Project: pidgin Issue ID: 4469 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-06-18 18:56 CEST Last Modified: 2013-05-05 11:08 CEST ====================================================================== Summary: upgrade to 2.7, plus relink Description: Hi Benny, would you please upgrade,and also make sure it relinks to "normal" libs? We dont want to use /opt/csw/X11/lib any more for stuff. ====================================================================== ---------------------------------------------------------------------- (0010371) laurent (manager) - 2013-05-05 11:08 https://www.opencsw.org/mantis/view.php?id=4469#c10371 ---------------------------------------------------------------------- Upgraded to 2.10.7, and dependencies fixed in the process. From noreply at opencsw.org Sun May 5 11:09:09 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 11:09:09 +0200 Subject: [bug-notifications] [pidgin 0004946]: Needs SSL support In-Reply-To: <9d094954d4b9c2808c700b9f26628e7e> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4946 ====================================================================== Reported By: phil Assigned To: laurent ====================================================================== Project: pidgin Issue ID: 4946 Category: packaging Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-05-16 21:51 CEST Last Modified: 2013-05-05 11:09 CEST ====================================================================== Summary: Needs SSL support Description: Without SSL support, this v2.6.6 binary is less useful than the old v2.0 binary included with solaris 10. (which does have ssl support) ====================================================================== ---------------------------------------------------------------------- (0009868) phil (reporter) - 2012-05-17 21:25 https://www.opencsw.org/mantis/view.php?id=4946#c9868 ---------------------------------------------------------------------- huh. What I know is that: 1. I had (version 2.6.x), according to --version 2. I attempted to connect to a local jabber server 3. it complained something about lacking TLS support 4. I did not touch my pidgin user configs, but just started up sun's /bin/pidgin from solaris 10, and that worked fine. Thus I filed this bug, and uninstalled CSWpidgin. As per the other bugs, CSWpidgin is long overdue for an update anyway. So if you want to package up a newer version, I'd be willing to test it out for you. From noreply at opencsw.org Sun May 5 11:10:17 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 11:10:17 +0200 Subject: [bug-notifications] [pidgin 0004946]: Needs SSL support In-Reply-To: <9d094954d4b9c2808c700b9f26628e7e> Message-ID: <5c9e8b3ea1064fdab1ae36faea770b5c@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4946 ====================================================================== Reported By: phil Assigned To: laurent ====================================================================== Project: pidgin Issue ID: 4946 Category: packaging Reproducibility: always Severity: block Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-05-16 21:51 CEST Last Modified: 2013-05-05 11:10 CEST ====================================================================== Summary: Needs SSL support Description: Without SSL support, this v2.6.6 binary is less useful than the old v2.0 binary included with solaris 10. (which does have ssl support) ====================================================================== ---------------------------------------------------------------------- (0010372) laurent (manager) - 2013-05-05 11:10 https://www.opencsw.org/mantis/view.php?id=4946#c10372 ---------------------------------------------------------------------- Upgraded to 2.10.7 with NSS and GNU TLS support. Tested on IRC and some others. From noreply at opencsw.org Sun May 5 11:10:38 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 11:10:38 +0200 Subject: [bug-notifications] [libmeanwhile1 0003363]: Depend on CSWggettextrt In-Reply-To: Message-ID: <82da166911fdef7740a5ddda8ad93cf9@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3363 ====================================================================== Reported By: harpchad Assigned To: laurent ====================================================================== Project: libmeanwhile1 Issue ID: 3363 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-14 03:20 CET Last Modified: 2013-05-05 11:10 CEST ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== From noreply at opencsw.org Sun May 5 11:12:44 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 11:12:44 +0200 Subject: [bug-notifications] [libmeanwhile1 0003363]: Depend on CSWggettextrt In-Reply-To: Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3363 ====================================================================== Reported By: harpchad Assigned To: laurent ====================================================================== Project: libmeanwhile1 Issue ID: 3363 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:20 CET Last Modified: 2013-05-05 11:12 CEST ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0010373) laurent (manager) - 2013-05-05 11:12 https://www.opencsw.org/mantis/view.php?id=3363#c10373 ---------------------------------------------------------------------- After cleaning up the recipe, I've found there is no direct runtime dependency on gettext. Removed altogether. From noreply at opencsw.org Sun May 5 11:13:13 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 11:13:13 +0200 Subject: [bug-notifications] [libmeanwhile1 0003562]: RPATH contains /opt/csw/lib/SALIST In-Reply-To: <952876a3e1178cefd05348b90d0b00b0> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3562 ====================================================================== Reported By: james Assigned To: laurent ====================================================================== Project: libmeanwhile1 Issue ID: 3562 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-04-01 19:01 CEST Last Modified: 2013-05-05 11:13 CEST ====================================================================== Summary: RPATH contains /opt/csw/lib/SALIST Description: RPATH contains /opt/csw/lib/SALIST ====================================================================== ---------------------------------------------------------------------- (0005810) james (developer) - 2009-04-01 19:03 https://www.opencsw.org/mantis/view.php?id=3562#c5810 ---------------------------------------------------------------------- And if SALIST was $ISALIST it would be behind /opt/csw/lib so no use anyway, needs reversing. From noreply at opencsw.org Sun May 5 11:14:09 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 11:14:09 +0200 Subject: [bug-notifications] [libmeanwhile1 0003562]: RPATH contains /opt/csw/lib/SALIST In-Reply-To: <952876a3e1178cefd05348b90d0b00b0> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3562 ====================================================================== Reported By: james Assigned To: laurent ====================================================================== Project: libmeanwhile1 Issue ID: 3562 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-04-01 19:01 CEST Last Modified: 2013-05-05 11:14 CEST ====================================================================== Summary: RPATH contains /opt/csw/lib/SALIST Description: RPATH contains /opt/csw/lib/SALIST ====================================================================== ---------------------------------------------------------------------- (0005810) james (developer) - 2009-04-01 19:03 https://www.opencsw.org/mantis/view.php?id=3562#c5810 ---------------------------------------------------------------------- And if SALIST was $ISALIST it would be behind /opt/csw/lib so no use anyway, needs reversing. ---------------------------------------------------------------------- (0010374) laurent (manager) - 2013-05-05 11:14 https://www.opencsw.org/mantis/view.php?id=3562#c10374 ---------------------------------------------------------------------- Fixed in the latest build: [7] RUNPATH /opt/csw/lib/$ISALIST:/opt/csw/lib [8] RPATH /opt/csw/lib/$ISALIST:/opt/csw/lib From noreply at opencsw.org Sun May 5 12:06:38 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 12:06:38 +0200 Subject: [bug-notifications] [pymysql 0004668]: Module MySQLdb outputs a DeprecationWarning In-Reply-To: <63cc590b244eede1798218b5d6603806> Message-ID: <1d17d24eead6c778d816144c3927970a@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4668 ====================================================================== Reported By: wbonnet Assigned To: maciej ====================================================================== Project: pymysql Issue ID: 4668 Category: other Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-01-14 01:02 CET Last Modified: 2013-05-05 12:06 CEST ====================================================================== Summary: Module MySQLdb outputs a DeprecationWarning Description: /opt/csw/lib/python/site-packages/MySQLdb/__init__.py:34: DeprecationWarning: the sets module is deprecated from sets import ImmutableSet ====================================================================== From noreply at opencsw.org Sun May 5 12:08:56 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 12:08:56 +0200 Subject: [bug-notifications] [pymysql 0004668]: Module MySQLdb outputs a DeprecationWarning In-Reply-To: <63cc590b244eede1798218b5d6603806> Message-ID: <3304786a4dee4277f1b9be34df0b2fac@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4668 ====================================================================== Reported By: wbonnet Assigned To: maciej ====================================================================== Project: pymysql Issue ID: 4668 Category: other Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-01-14 01:02 CET Last Modified: 2013-05-05 12:08 CEST ====================================================================== Summary: Module MySQLdb outputs a DeprecationWarning Description: /opt/csw/lib/python/site-packages/MySQLdb/__init__.py:34: DeprecationWarning: the sets module is deprecated from sets import ImmutableSet ====================================================================== ---------------------------------------------------------------------- (0010375) maciej (manager) - 2013-05-05 12:08 https://www.opencsw.org/mantis/view.php?id=4668#c10375 ---------------------------------------------------------------------- It has been fixed upstream, packaged and released. From noreply at opencsw.org Sun May 5 13:13:33 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 13:13:33 +0200 Subject: [bug-notifications] [unbound 0004976]: unbound fails to start In-Reply-To: <2b4208575225c793b29e5ad2b06f0a20> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4976 ====================================================================== Reported By: matjam Assigned To: ihsan ====================================================================== Project: unbound Issue ID: 4976 Category: regular use Reproducibility: always Severity: block Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-07-10 08:02 CEST Last Modified: 2013-05-05 13:13 CEST ====================================================================== Summary: unbound fails to start Description: Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.error] [9769:0] error: error parsing local-data 'localhost. 10800 IN SOA localhost. nobody.invalid. 1 3600 1200 604800 10800': Syntax error, value expected Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.error] [9769:0] error: bad local-data: localhost. 10800 IN SOA localhost. nobody.invalid. 1 3600 1200 604800 10800 Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.error] [9769:0] error: out of memory adding default zone Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.crit] [9769:0] fatal error: Could not set up local zones ====================================================================== ---------------------------------------------------------------------- (0010376) ihsan (manager) - 2013-05-05 13:13 https://www.opencsw.org/mantis/view.php?id=4976#c10376 ---------------------------------------------------------------------- Looks like a configuration issue. Closing this bug. If it's still existing, please reopen it. From noreply at opencsw.org Sun May 5 13:13:53 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 5 May 2013 13:13:53 +0200 Subject: [bug-notifications] [unbound 0004976]: unbound fails to start In-Reply-To: <2b4208575225c793b29e5ad2b06f0a20> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4976 ====================================================================== Reported By: matjam Assigned To: ihsan ====================================================================== Project: unbound Issue ID: 4976 Category: regular use Reproducibility: always Severity: block Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-07-10 08:02 CEST Last Modified: 2013-05-05 13:13 CEST ====================================================================== Summary: unbound fails to start Description: Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.error] [9769:0] error: error parsing local-data 'localhost. 10800 IN SOA localhost. nobody.invalid. 1 3600 1200 604800 10800': Syntax error, value expected Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.error] [9769:0] error: bad local-data: localhost. 10800 IN SOA localhost. nobody.invalid. 1 3600 1200 604800 10800 Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.error] [9769:0] error: out of memory adding default zone Jul 10 15:13:44 nsdalcdns01v unbound: [ID 993594 daemon.crit] [9769:0] fatal error: Could not set up local zones ====================================================================== ---------------------------------------------------------------------- (0010376) ihsan (manager) - 2013-05-05 13:13 https://www.opencsw.org/mantis/view.php?id=4976#c10376 ---------------------------------------------------------------------- Looks like a configuration issue. Closing this bug. If it's still existing, please reopen it. From noreply at opencsw.org Wed May 8 15:36:39 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 8 May 2013 15:36:39 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: <18aa893a6cb58de3be98ed9e86f28f22@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-08 15:36 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010377) villiboy (reporter) - 2013-05-08 15:36 https://www.opencsw.org/mantis/view.php?id=5066#c10377 ---------------------------------------------------------------------- Hi Mark, when i install the Puppet Enterprise Agent version for Solaris the package installation works. Regards, Martin From noreply at opencsw.org Wed May 8 15:49:14 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 8 May 2013 15:49:14 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: <2ddccb0632415602484a37c9a92b9bdc@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-08 15:49 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010378) markp (manager) - 2013-05-08 15:49 https://www.opencsw.org/mantis/view.php?id=5066#c10378 ---------------------------------------------------------------------- What's the version of puppet in PE? Do a 'facter puppetversion' please? Ta. From noreply at opencsw.org Thu May 9 22:58:23 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 9 May 2013 22:58:23 +0200 Subject: [bug-notifications] [guile_dev 0005073]: Inconsistent definition of scm_remember_upto_here_1 Message-ID: <0a81b50be866afba24b70bba2cc839c0@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5073 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: guile_dev Issue ID: 5073 Category: Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-09 22:58 CEST Last Modified: 2013-05-09 22:58 CEST ====================================================================== Summary: Inconsistent definition of scm_remember_upto_here_1 Description: When trying to compile the latest gnutls 3.1.10 I get CC guile_gnutls_v_2_la-core.lo "/opt/csw/include/guile/2.0/libguile/gc.h", line 279: warning: implicit function declaration: scm_remember_upto_here_1 "/opt/csw/include/guile/2.0/libguile/gc.h", line 320: identifier redeclared: scm_remember_upto_here_1 current : function(pointer to struct scm_unused_struct {char scm_unused_field}) returning void previous: function() returning int : "/opt/csw/include/guile/2.0/libguile/gc.h", line 279 which indicates the duplicate and inconsistent definition of scm_remember_upto_here_1. ====================================================================== From noreply at opencsw.org Fri May 10 17:54:46 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 10 May 2013 17:54:46 +0200 Subject: [bug-notifications] [libgd2 0005074]: Additional path to internal GDFONTPATH Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5074 ====================================================================== Reported By: Matthew Stier Assigned To: ====================================================================== Project: libgd2 Issue ID: 5074 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-10 17:54 CEST Last Modified: 2013-05-10 17:54 CEST ====================================================================== Summary: Additional path to internal GDFONTPATH Description: I'd recommend changing the internal default of GDFONTPATH to prepend /etc/opt/csw/share/fonts/truetype since /etc/opt/csw is often used to override /opt/csw. ====================================================================== From noreply at opencsw.org Fri May 10 18:12:15 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 10 May 2013 18:12:15 +0200 Subject: [bug-notifications] [libgd2 0005074]: Additional path to internal GDFONTPATH In-Reply-To: <9e1c6221e3af91e479d407546dbe240d> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5074 ====================================================================== Reported By: Matthew Stier Assigned To: dam ====================================================================== Project: libgd2 Issue ID: 5074 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-05-10 17:54 CEST Last Modified: 2013-05-10 18:12 CEST ====================================================================== Summary: Additional path to internal GDFONTPATH Description: I'd recommend changing the internal default of GDFONTPATH to prepend /etc/opt/csw/share/fonts/truetype since /etc/opt/csw is often used to override /opt/csw. ====================================================================== From noreply at opencsw.org Fri May 10 18:18:36 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 10 May 2013 18:18:36 +0200 Subject: [bug-notifications] [libgd2 0005074]: Additional path to internal GDFONTPATH In-Reply-To: <9e1c6221e3af91e479d407546dbe240d> Message-ID: <2cacf8509a231cf5310df77749574128@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5074 ====================================================================== Reported By: Matthew Stier Assigned To: dam ====================================================================== Project: libgd2 Issue ID: 5074 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-05-10 17:54 CEST Last Modified: 2013-05-10 18:18 CEST ====================================================================== Summary: Additional path to internal GDFONTPATH Description: I'd recommend changing the internal default of GDFONTPATH to prepend /etc/opt/csw/share/fonts/truetype since /etc/opt/csw is often used to override /opt/csw. ====================================================================== ---------------------------------------------------------------------- (0010379) dam (administrator) - 2013-05-10 18:18 https://www.opencsw.org/mantis/view.php?id=5074#c10379 ---------------------------------------------------------------------- The alternative (and now preferred) path /etc/opt/csw for overriding /opt/csw/etc has no correspondence at the moment to /opt/csw/share. Could you please explain the usecase? You could also add the symlinks to /opt/csw/share/fonts/truetype if necessary? From noreply at opencsw.org Fri May 10 19:13:43 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 10 May 2013 19:13:43 +0200 Subject: [bug-notifications] [libgd2 0005074]: Additional path to internal GDFONTPATH In-Reply-To: <9e1c6221e3af91e479d407546dbe240d> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5074 ====================================================================== Reported By: Matthew Stier Assigned To: dam ====================================================================== Project: libgd2 Issue ID: 5074 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-05-10 17:54 CEST Last Modified: 2013-05-10 19:13 CEST ====================================================================== Summary: Additional path to internal GDFONTPATH Description: I'd recommend changing the internal default of GDFONTPATH to prepend /etc/opt/csw/share/fonts/truetype since /etc/opt/csw is often used to override /opt/csw. ====================================================================== ---------------------------------------------------------------------- (0010380) Matthew Stier (reporter) - 2013-05-10 19:13 https://www.opencsw.org/mantis/view.php?id=5074#c10380 ---------------------------------------------------------------------- I originally went with creating /opt/csw/share/fonts/truetype (fonts/truetype does not normally exist) and putting in symbolic links for 'arial.ttf' and 'Time-Roman.ttf' to resolve an issue with an application. Since I would be replicating this to a number of other systems, I thought it best to follow standard practice and moved the local changes to /etc/opt/csw. Since the libgd.so library only had an entry for /opt/csw/share/fonts/truetype, I created a symbolic at /opt/csw/share/fonts, pointing to /etc/opt/csw/share/fonts. From noreply at opencsw.org Fri May 10 19:46:57 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 10 May 2013 19:46:57 +0200 Subject: [bug-notifications] [guile_dev 0005073]: Inconsistent definition of scm_remember_upto_here_1 In-Reply-To: <413ae93d85edadda1f14b81c7b3f839d> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5073 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: guile_dev Issue ID: 5073 Category: Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-05-09 22:58 CEST Last Modified: 2013-05-10 19:46 CEST ====================================================================== Summary: Inconsistent definition of scm_remember_upto_here_1 Description: When trying to compile the latest gnutls 3.1.10 I get CC guile_gnutls_v_2_la-core.lo "/opt/csw/include/guile/2.0/libguile/gc.h", line 279: warning: implicit function declaration: scm_remember_upto_here_1 "/opt/csw/include/guile/2.0/libguile/gc.h", line 320: identifier redeclared: scm_remember_upto_here_1 current : function(pointer to struct scm_unused_struct {char scm_unused_field}) returning void previous: function() returning int : "/opt/csw/include/guile/2.0/libguile/gc.h", line 279 which indicates the duplicate and inconsistent definition of scm_remember_upto_here_1. ====================================================================== From noreply at opencsw.org Fri May 10 21:50:54 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 10 May 2013 21:50:54 +0200 Subject: [bug-notifications] [libgd2 0005074]: Additional path to internal GDFONTPATH In-Reply-To: <9e1c6221e3af91e479d407546dbe240d> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5074 ====================================================================== Reported By: Matthew Stier Assigned To: dam ====================================================================== Project: libgd2 Issue ID: 5074 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-05-10 17:54 CEST Last Modified: 2013-05-10 21:50 CEST ====================================================================== Summary: Additional path to internal GDFONTPATH Description: I'd recommend changing the internal default of GDFONTPATH to prepend /etc/opt/csw/share/fonts/truetype since /etc/opt/csw is often used to override /opt/csw. ====================================================================== ---------------------------------------------------------------------- (0010381) dam (administrator) - 2013-05-10 21:50 https://www.opencsw.org/mantis/view.php?id=5074#c10381 ---------------------------------------------------------------------- So you are replication /opt/csw as a whole with NFS or similar? I would figure the font setting are the same on all machines. I am also thinking of appending /usr/openwin/lib/X11/fonts/TrueType. Do you have other suggestions on how to enhance usefulness? From noreply at opencsw.org Fri May 10 22:41:49 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 10 May 2013 22:41:49 +0200 Subject: [bug-notifications] [libgd2 0005074]: Additional path to internal GDFONTPATH In-Reply-To: <9e1c6221e3af91e479d407546dbe240d> Message-ID: <2a4d8528194e86f44353e16b76d056ca@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5074 ====================================================================== Reported By: Matthew Stier Assigned To: dam ====================================================================== Project: libgd2 Issue ID: 5074 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-05-10 17:54 CEST Last Modified: 2013-05-10 22:41 CEST ====================================================================== Summary: Additional path to internal GDFONTPATH Description: I'd recommend changing the internal default of GDFONTPATH to prepend /etc/opt/csw/share/fonts/truetype since /etc/opt/csw is often used to override /opt/csw. ====================================================================== ---------------------------------------------------------------------- (0010382) Matthew Stier (reporter) - 2013-05-10 22:41 https://www.opencsw.org/mantis/view.php?id=5074#c10382 ---------------------------------------------------------------------- Actually, OpenCSW doesn't lend itself well to sharing or copying. I install pkgutil on each system, and then install the packages I need on each system. Actually, I'm thinking of what happens when I add or upgrade packages, and changes I've made within /opt/csw are destroyed, where as, the changes made under /etc/opt/csw are not. BTW: Adding /usr/openwin/lib/X11/fonts/TrueType did not help me, because the font names I need were inconsistant. Solaris uses 'Arial.ttf', the application required 'arial.ttf'. Solaris uses 'TimesNewRoman.ttf', the application required 'Time-Roman.ttf'. By using symbolic links, was able to rename the files to what the application needed. From noreply at opencsw.org Sat May 11 10:31:44 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 11 May 2013 10:31:44 +0200 Subject: [bug-notifications] [qt4_dev 0005075]: Qt packaging doesn't respect our file system layout standard Message-ID: <98b41f2f610dc556a9c4c93bb906742f@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5075 ====================================================================== Reported By: pfelecan Assigned To: ====================================================================== Project: qt4_dev Issue ID: 5075 Category: Reproducibility: always Severity: tweak Priority: high Status: new ====================================================================== Date Submitted: 2013-05-11 10:31 CEST Last Modified: 2013-05-11 10:31 CEST ====================================================================== Summary: Qt packaging doesn't respect our file system layout standard Description: The package installs a lot of directories directly in the root of Open CSW tree, /opt/csw, e.g. prototypes, mkspecs, &c. This rises errors in checkpkg, e.g. when a dynamic shared object is installed in /opt/csw/prototypes it is flagged with the "binary-architecture-does-not-match-placement" tag. After having discussed the issue on the "devel" mailing list, http://lists.opencsw.org/pipermail/devel/2013-May/026324.html, I propose to modify the recipe in order to install the various component in appropriate directories. For this, you can use inspiration given by Debian's packaging, http://packages.debian.org/wheezy/i386/python-qt4/filelist ====================================================================== From noreply at opencsw.org Sun May 12 13:59:39 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 12 May 2013 13:59:39 +0200 Subject: [bug-notifications] [mailutils 0003255]: Depend on CSWggettextrt In-Reply-To: <78106d6e75f48fe82b9e859b22b623c0> Message-ID: <93d6762578b43aa0b67a8e6ee328320f@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3255 ====================================================================== Reported By: harpchad Assigned To: yann ====================================================================== Project: mailutils Issue ID: 3255 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:08 CET Last Modified: 2013-05-12 13:59 CEST ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0010383) yann (manager) - 2013-05-12 13:59 https://www.opencsw.org/mantis/view.php?id=3255#c10383 ---------------------------------------------------------------------- Fixed in 1.2,REV=2013.04.21 From noreply at opencsw.org Sun May 12 14:00:11 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 12 May 2013 14:00:11 +0200 Subject: [bug-notifications] [mailutils 0004023]: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall In-Reply-To: <531f8ac199b24b09adb67d7ae4a4c204> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4023 ====================================================================== Reported By: dam Assigned To: yann ====================================================================== Project: mailutils Issue ID: 4023 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-11-11 16:18 CET Last Modified: 2013-05-12 14:00 CEST ====================================================================== Summary: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall Description: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall ====================================================================== ---------------------------------------------------------------------- (0010384) yann (manager) - 2013-05-12 14:00 https://www.opencsw.org/mantis/view.php?id=4023#c10384 ---------------------------------------------------------------------- Fixed in 1.2,REV=2013.04.21 From noreply at opencsw.org Sun May 12 14:00:32 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 12 May 2013 14:00:32 +0200 Subject: [bug-notifications] [cyrus_imapd 0004724]: Skiplist DB problem In-Reply-To: <974bcd7e05c0a66e5ae56f20eaefb767> Message-ID: <438e1f83711328f53aec28ae251c7ebb@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4724 ====================================================================== Reported By: ctw Assigned To: yann ====================================================================== Project: cyrus_imapd Issue ID: 4724 Category: upgrade Reproducibility: always Severity: block Priority: normal Status: closed Resolution: unable to reproduce Fixed in Version: ====================================================================== Date Submitted: 2011-03-09 12:12 CET Last Modified: 2013-05-12 14:00 CEST ====================================================================== Summary: Skiplist DB problem Description: Hi I've installed cyrusimapd 2.4.6 as an upgrade from 2.3.16. My system is Oracle Solaris 11 Express 2010.11. My db files are all skiplist. When i launch it i get the following errors : Mar 9 11:57:01 endor cyrus/imaps[7686]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3[7687]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3s[7688]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3[7683]: [ID 864961 local6.crit] DBERROR: critical database situation Mar 9 11:57:01 endor cyrus/pop3s[7684]: [ID 864961 local6.crit] DBERROR: critical database situation cvt_cyrusdb refuses (in fact does nothing) to convert the .db files in any format. file doesn't recognises the files as 'Cyrus skiplist DB' : root at endor:/backend1/cyrus-config# file *.db annotations.db: data deliver.db: data mailboxes.db: data tls_sessions.db: data In fact i'm not sure if the problem comes from the package or from Solaris Express, i'm gonna install a Solaris 10 to be sure. ====================================================================== ---------------------------------------------------------------------- (0010314) yann (manager) - 2013-04-07 00:38 https://www.opencsw.org/mantis/view.php?id=4724#c10314 ---------------------------------------------------------------------- No news, good news. I am closing this bug ! Feel free to reopen it or open a new one if the problem is still there. From noreply at opencsw.org Mon May 13 10:00:55 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 13 May 2013 10:00:55 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: <570837ca7befaf2bd4f0448780a57b7d@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-13 10:00 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010385) villiboy (reporter) - 2013-05-13 10:00 https://www.opencsw.org/mantis/view.php?id=5066#c10385 ---------------------------------------------------------------------- PKGINST: PUPpuppet NAME: Puppet Enterprise puppet - http://puppetlabs.com CATEGORY: application ARCH: i386 VERSION: 2.7.21-5 BASEDIR: / VENDOR: puppetlabs.com PSTAMP: 2013-04-04.200753 INSTDATE: May 08 2013 14:57 EMAIL: support at puppetlabs.com STATUS: completely installed PKGINST: PUPfacter NAME: Puppet Enterprise facter - http://puppetlabs.com CATEGORY: application ARCH: i386 VERSION: 1.6.17-1 BASEDIR: / VENDOR: puppetlabs.com PSTAMP: 2013-04-04.200753 INSTDATE: May 08 2013 14:30 EMAIL: support at puppetlabs.com STATUS: completely installed From noreply at opencsw.org Mon May 13 10:41:49 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 13 May 2013 10:41:49 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: <75f8af13c38e79fbe08a29adc219aab0@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-13 10:41 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010386) markp (manager) - 2013-05-13 10:41 https://www.opencsw.org/mantis/view.php?id=5066#c10386 ---------------------------------------------------------------------- Yes, there's your obvious answer - it's 2.7 This is a puppet3 issue with that package, for whatever reason. From noreply at opencsw.org Mon May 13 13:25:57 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 13 May 2013 13:25:57 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: <0ff115456a7bc1248a18136c43c02f2c@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-13 13:25 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010387) villiboy (reporter) - 2013-05-13 13:25 https://www.opencsw.org/mantis/view.php?id=5066#c10387 ---------------------------------------------------------------------- okay, i see it. i have also raise a ticket to the puppet team. i hope they will provide us a solution as soon as possible. thanks for your help. See details: http://projects.puppetlabs.com/issues/19760 From noreply at opencsw.org Wed May 15 16:54:33 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 15 May 2013 16:54:33 +0200 Subject: [bug-notifications] [qt4_dev 0005075]: Qt packaging doesn't respect our file system layout standard In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5075 ====================================================================== Reported By: pfelecan Assigned To: cgrzemba ====================================================================== Project: qt4_dev Issue ID: 5075 Category: Reproducibility: always Severity: tweak Priority: high Status: assigned ====================================================================== Date Submitted: 2013-05-11 10:31 CEST Last Modified: 2013-05-15 16:54 CEST ====================================================================== Summary: Qt packaging doesn't respect our file system layout standard Description: The package installs a lot of directories directly in the root of Open CSW tree, /opt/csw, e.g. prototypes, mkspecs, &c. This rises errors in checkpkg, e.g. when a dynamic shared object is installed in /opt/csw/prototypes it is flagged with the "binary-architecture-does-not-match-placement" tag. After having discussed the issue on the "devel" mailing list, http://lists.opencsw.org/pipermail/devel/2013-May/026324.html, I propose to modify the recipe in order to install the various component in appropriate directories. For this, you can use inspiration given by Debian's packaging, http://packages.debian.org/wheezy/i386/python-qt4/filelist ====================================================================== From noreply at opencsw.org Thu May 16 09:41:21 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 16 May 2013 09:41:21 +0200 Subject: [bug-notifications] [pca 0005076]: Unable to establish SSL connection Message-ID: <91e3d9f859fc19340e1740d2b1d5965d@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5076 ====================================================================== Reported By: wcohrs Assigned To: ====================================================================== Project: pca Issue ID: 5076 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-16 09:41 CEST Last Modified: 2013-05-16 09:41 CEST ====================================================================== Summary: Unable to establish SSL connection Description: /opt/csw/bin/pca -V Option list: 1 Option patchdir: /sun/patches/. Option wget: /opt/csw/bin/wget Option debug: 1 Command: /opt/csw/bin/pca ARGV: missing Version: 20120829-01 CWD: /sun/patches Config files: /etc/opt/csw/pca.conf Found /opt/csw/bin/wget (1.14, 11400, https) Using /opt/csw/bin/wget Found /usr/bin/uname Prerequisites for threads not met, setting threads to 0 Never update Expanded patch list: missing Downloading xref file to /var/tmp/patchdiag.xref Trying Oracle Trying https://getupdates.oracle.com/ (1/1) src: oracle, srcurl: /opt/csw/bin/wget --progress=dot:binary --ca-certificate=/opt/csw/bin/pca -O /var/tmp/patchdiag.xref "https://getupdates.oracle.com/reports/patchdiag.xref" --2013-05-16 09:38:22-- https://getupdates.oracle.com/reports/patchdiag.xref Resolving getupdates.oracle.com (getupdates.oracle.com)... 141.146.44.51 Connecting to getupdates.oracle.com (getupdates.oracle.com)|141.146.44.51|:443... connected. Unable to establish SSL connection. Failed (Unknown Error) Failed (patchdiag.xref not found) ====================================================================== From noreply at opencsw.org Thu May 16 13:20:49 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 16 May 2013 13:20:49 +0200 Subject: [bug-notifications] [pca 0005076]: Unable to establish SSL connection In-Reply-To: Message-ID: <7ca9bb4ac70e58303179771ac7f6c522@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5076 ====================================================================== Reported By: wcohrs Assigned To: dam ====================================================================== Project: pca Issue ID: 5076 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-05-16 09:41 CEST Last Modified: 2013-05-16 13:20 CEST ====================================================================== Summary: Unable to establish SSL connection Description: /opt/csw/bin/pca -V Option list: 1 Option patchdir: /sun/patches/. Option wget: /opt/csw/bin/wget Option debug: 1 Command: /opt/csw/bin/pca ARGV: missing Version: 20120829-01 CWD: /sun/patches Config files: /etc/opt/csw/pca.conf Found /opt/csw/bin/wget (1.14, 11400, https) Using /opt/csw/bin/wget Found /usr/bin/uname Prerequisites for threads not met, setting threads to 0 Never update Expanded patch list: missing Downloading xref file to /var/tmp/patchdiag.xref Trying Oracle Trying https://getupdates.oracle.com/ (1/1) src: oracle, srcurl: /opt/csw/bin/wget --progress=dot:binary --ca-certificate=/opt/csw/bin/pca -O /var/tmp/patchdiag.xref "https://getupdates.oracle.com/reports/patchdiag.xref" --2013-05-16 09:38:22-- https://getupdates.oracle.com/reports/patchdiag.xref Resolving getupdates.oracle.com (getupdates.oracle.com)... 141.146.44.51 Connecting to getupdates.oracle.com (getupdates.oracle.com)|141.146.44.51|:443... connected. Unable to establish SSL connection. Failed (Unknown Error) Failed (patchdiag.xref not found) ====================================================================== From noreply at opencsw.org Thu May 16 13:21:28 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 16 May 2013 13:21:28 +0200 Subject: [bug-notifications] [pca 0005076]: Unable to establish SSL connection In-Reply-To: Message-ID: The following issue has been set as DUPLICATE OF issue 0005068. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5076 ====================================================================== Reported By: wcohrs Assigned To: dam ====================================================================== Project: pca Issue ID: 5076 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-05-16 09:41 CEST Last Modified: 2013-05-16 13:21 CEST ====================================================================== Summary: Unable to establish SSL connection Description: /opt/csw/bin/pca -V Option list: 1 Option patchdir: /sun/patches/. Option wget: /opt/csw/bin/wget Option debug: 1 Command: /opt/csw/bin/pca ARGV: missing Version: 20120829-01 CWD: /sun/patches Config files: /etc/opt/csw/pca.conf Found /opt/csw/bin/wget (1.14, 11400, https) Using /opt/csw/bin/wget Found /usr/bin/uname Prerequisites for threads not met, setting threads to 0 Never update Expanded patch list: missing Downloading xref file to /var/tmp/patchdiag.xref Trying Oracle Trying https://getupdates.oracle.com/ (1/1) src: oracle, srcurl: /opt/csw/bin/wget --progress=dot:binary --ca-certificate=/opt/csw/bin/pca -O /var/tmp/patchdiag.xref "https://getupdates.oracle.com/reports/patchdiag.xref" --2013-05-16 09:38:22-- https://getupdates.oracle.com/reports/patchdiag.xref Resolving getupdates.oracle.com (getupdates.oracle.com)... 141.146.44.51 Connecting to getupdates.oracle.com (getupdates.oracle.com)|141.146.44.51|:443... connected. Unable to establish SSL connection. Failed (Unknown Error) Failed (patchdiag.xref not found) ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0005068 Problems negotiating SSL with updates.o... ====================================================================== From noreply at opencsw.org Thu May 16 13:21:29 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 16 May 2013 13:21:29 +0200 Subject: [bug-notifications] [wget 0005068]: Problems negotiating SSL with updates.oracle.com In-Reply-To: Message-ID: The issue 0005076 has been set as DUPLICATE OF the following issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5068 ====================================================================== Reported By: beezly Assigned To: dam ====================================================================== Project: wget Issue ID: 5068 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-04-19 11:58 CEST Last Modified: 2013-04-20 10:36 CEST ====================================================================== Summary: Problems negotiating SSL with updates.oracle.com Description: with wget 1.14 I am experiencing problems connecting to updates.oracle.com (as PCA does when it pulls down the patchdiag.xref file). If I do; /opt/csw/bin/wget -d --progress=dot:binary --ca-certificate=/opt/csw/bin/pca -O /var/tmp/patchdiag.xref "https://getupdates.oracle.com/reports/patchdiag.xref" I get; Setting --progress (progress) to dot:binary Setting --ca-certificate (cacertificate) to /opt/csw/bin/pca Setting --output-document (outputdocument) to /var/tmp/patchdiag.xref DEBUG output created by Wget 1.14 on solaris2.10. URI encoding = 'ISO8859-1' --2013-04-19 10:54:03-- https://getupdates.oracle.com/reports/patchdiag.xref Resolving getupdates.oracle.com (getupdates.oracle.com)... 141.146.44.51 Caching getupdates.oracle.com => 141.146.44.51 Connecting to getupdates.oracle.com (getupdates.oracle.com)|141.146.44.51|:443... connected. Created socket 5. Releasing 0x000e8a18 (new refcount 1). Initiating SSL handshake. SSL handshake failed. Closed fd 5 Unable to establish SSL connection. The same works if I use /usr/sfw/bin/wget instead (1.12 on this system). ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0005076 Unable to establish SSL connection ====================================================================== ---------------------------------------------------------------------- (0010343) yann (developer) - 2013-04-20 10:36 https://www.opencsw.org/mantis/view.php?id=5068#c10343 ---------------------------------------------------------------------- I opened a Service Request on "My Oracle Support" about this problem. I'll keep you updated. From noreply at opencsw.org Thu May 16 13:27:28 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 16 May 2013 13:27:28 +0200 Subject: [bug-notifications] [pca 0005076]: Unable to establish SSL connection In-Reply-To: Message-ID: <0bb5cdc0bce30bdc30f5f8077a90aafa@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5076 ====================================================================== Reported By: wcohrs Assigned To: dam ====================================================================== Project: pca Issue ID: 5076 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-05-16 09:41 CEST Last Modified: 2013-05-16 13:27 CEST ====================================================================== Summary: Unable to establish SSL connection Description: /opt/csw/bin/pca -V Option list: 1 Option patchdir: /sun/patches/. Option wget: /opt/csw/bin/wget Option debug: 1 Command: /opt/csw/bin/pca ARGV: missing Version: 20120829-01 CWD: /sun/patches Config files: /etc/opt/csw/pca.conf Found /opt/csw/bin/wget (1.14, 11400, https) Using /opt/csw/bin/wget Found /usr/bin/uname Prerequisites for threads not met, setting threads to 0 Never update Expanded patch list: missing Downloading xref file to /var/tmp/patchdiag.xref Trying Oracle Trying https://getupdates.oracle.com/ (1/1) src: oracle, srcurl: /opt/csw/bin/wget --progress=dot:binary --ca-certificate=/opt/csw/bin/pca -O /var/tmp/patchdiag.xref "https://getupdates.oracle.com/reports/patchdiag.xref" --2013-05-16 09:38:22-- https://getupdates.oracle.com/reports/patchdiag.xref Resolving getupdates.oracle.com (getupdates.oracle.com)... 141.146.44.51 Connecting to getupdates.oracle.com (getupdates.oracle.com)|141.146.44.51|:443... connected. Unable to establish SSL connection. Failed (Unknown Error) Failed (patchdiag.xref not found) ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0005068 Problems negotiating SSL with updates.o... ====================================================================== ---------------------------------------------------------------------- (0010389) dam (administrator) - 2013-05-16 13:27 https://www.opencsw.org/mantis/view.php?id=5076#c10389 ---------------------------------------------------------------------- This is a known issue due to a bug at Oracles side, please see the duplicate bug https://www.opencsw.org/mantis/view.php?id=5068 for details. I just pushed pca 20130502.01,REV=2013.05.16 which has a workaround integrated. From noreply at opencsw.org Sun May 19 11:11:55 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 11:11:55 +0200 Subject: [bug-notifications] [mcrypt_dev 0002881]: include/mutils directory not present in stable libmcrypt distribution In-Reply-To: Message-ID: <2d90020ecccb83f3a87b206ceae95647@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2881 ====================================================================== Reported By: battistuz Assigned To: maciej ====================================================================== Project: mcrypt_dev Issue ID: 2881 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2008-05-14 19:45 CEST Last Modified: 2013-05-19 11:11 CEST ====================================================================== Summary: include/mutils directory not present in stable libmcrypt distribution Description: Please check the consistency of files in the libmcrypt package between the stable and unstable distributions. It appears that the include/mutils directory with the mcrypt.h file does not get distributed with the stable distribution package but does appear in the unstable distribution. ====================================================================== ---------------------------------------------------------------------- (0005297) asmoore (reporter) - 2008-05-15 06:55 https://www.opencsw.org/mantis/view.php?id=2881#c5297 ---------------------------------------------------------------------- See the Release Program heading at http://www.blastwave.org/userguide/ libmcrypt from unstable is due in stable around July. In the meantime, you should be fine to update libmcrypt from unstable using the -s option on pkg-get. From noreply at opencsw.org Sun May 19 11:16:30 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 11:16:30 +0200 Subject: [bug-notifications] [mcrypt_dev 0002881]: include/mutils directory not present in stable libmcrypt distribution In-Reply-To: Message-ID: <55699c3790afd7b497e455f5e8636dca@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2881 ====================================================================== Reported By: battistuz Assigned To: maciej ====================================================================== Project: mcrypt_dev Issue ID: 2881 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2008-05-14 19:45 CEST Last Modified: 2013-05-19 11:16 CEST ====================================================================== Summary: include/mutils directory not present in stable libmcrypt distribution Description: Please check the consistency of files in the libmcrypt package between the stable and unstable distributions. It appears that the include/mutils directory with the mcrypt.h file does not get distributed with the stable distribution package but does appear in the unstable distribution. ====================================================================== ---------------------------------------------------------------------- (0010390) maciej (manager) - 2013-05-19 11:16 https://www.opencsw.org/mantis/view.php?id=2881#c10390 ---------------------------------------------------------------------- The mutils directory is included in the mcrypt_dev-2.5.8,REV=2011.12.19-SunOS5.9-i386-CSW.pkg.gz package. http://buildfarm.opencsw.org/pkgdb/srv4/a6c948036ff0471cdb707af638cde6a7/files/ From noreply at opencsw.org Sun May 19 11:20:24 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 11:20:24 +0200 Subject: [bug-notifications] [protobuf_devel 0005051]: Diff type of headers protobuf 2.3 - error compilation In-Reply-To: Message-ID: <7e3770c43114f5cde4ff9ad5e8354e0f@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5051 ====================================================================== Reported By: pablo84sos Assigned To: ====================================================================== Project: protobuf_devel Issue ID: 5051 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2013-02-19 09:50 CET Last Modified: 2013-05-19 11:20 CEST ====================================================================== Summary: Diff type of headers protobuf 2.3 - error compilation Description: Hi, When I compile protbuf-2.3 from source a have got a little bit diffrent protobuf headers . See below. -bash-4.0$ diff /opt/csw/include/google/protobuf ../../proto23/include/google/protobuf/ Common subdirectories: /opt/csw/include/google/protobuf/compiler and ../../proto23/include/google/protobuf//compiler diff /opt/csw/include/google/protobuf/descriptor_database.h ../../proto23/include/google/protobuf//descriptor_database.h 236c236 < typename std::map::iterator FindLastLessOrEqual( --- > typename map::iterator FindLastLessOrEqual( Common subdirectories: /opt/csw/include/google/protobuf/io and ../../proto23/include/google/protobuf//io diff /opt/csw/include/google/protobuf/repeated_field.h ../../proto23/include/google/protobuf//repeated_field.h 51d50 < #include Common subdirectories: /opt/csw/include/google/protobuf/stubs and ../../proto23/include/google/protobuf//stubs The diffrent cause that I can't use package - I mean I have a lot of problems during a compilation (additional information)- for instance I'm building examples direct from source 2.3 of protobuf with headers of package they don't compile properly, but if I use headers from source it is ok. I think that headers from package and source should be the same but they don't. ====================================================================== ---------------------------------------------------------------------- (0010391) maciej (manager) - 2013-05-19 11:20 https://www.opencsw.org/mantis/view.php?id=5051#c10391 ---------------------------------------------------------------------- I've removed the 2.3 version from the catalog. I've built and released version 2.5.0 built with GCC, in the /opt/csw/gxx prefix. Please reopen or file a new bug if necessary. From noreply at opencsw.org Sun May 19 11:23:37 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 11:23:37 +0200 Subject: [bug-notifications] [python 0005040]: ImportError: No module named _socket In-Reply-To: <06801787fa433faeeaee319c5ece10d5> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5040 ====================================================================== Reported By: ghenry Assigned To: maciej ====================================================================== Project: python Issue ID: 5040 Category: regular use Reproducibility: have not tried Severity: block Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2013-01-10 12:24 CET Last Modified: 2013-05-19 11:23 CEST ====================================================================== Summary: ImportError: No module named _socket Description: % /opt/csw/bin/python /opt/csw/bin/supybot --daemon my_chan/chan-bot.conf Traceback (most recent call last): File "/opt/csw/bin/supybot", line 37, in import supybot File "/opt/csw/lib/python/site-packages/supybot/__init__.py", line 34, in import supybot.utils as utils File "/opt/csw/lib/python/site-packages/supybot/utils/__init__.py", line 100, in import net File "/opt/csw/lib/python/site-packages/supybot/utils/net.py", line 35, in import socket File "/opt/csw/lib/python/socket.py", line 46, in import _socket ImportError: No module named _socket ====================================================================== ---------------------------------------------------------------------- (0010392) maciej (manager) - 2013-05-19 11:23 https://www.opencsw.org/mantis/view.php?id=5040#c10392 ---------------------------------------------------------------------- Fixed, closing. From noreply at opencsw.org Sun May 19 12:35:34 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 12:35:34 +0200 Subject: [bug-notifications] [libkrb5_dev 0005007]: krb5-config reports -xchip=pentium_pro In-Reply-To: <1d7619431ed30fa9bfcaa30fe2d08366> Message-ID: <4198b042d9702335b7f702fc088158d6@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5007 ====================================================================== Reported By: jh Assigned To: laurent ====================================================================== Project: libkrb5_dev Issue ID: 5007 Category: regular use Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-10-01 11:55 CEST Last Modified: 2013-05-19 12:35 CEST ====================================================================== Summary: krb5-config reports -xchip=pentium_pro Description: Since krb5 is build with Sun Studio this flag is used to build libkrb5 but gcc does not support this flag. So this brakes building packages that use krb5-config --libs -L/opt/csw/lib -R/opt/csw/lib -m32 -xarch=pentium_pro -xchip=pentium_pro -L/opt/csw/lib -lkrb5 -lk5crypto -lcom_err -lresolv -lsocket -lnsl with gcc ====================================================================== ---------------------------------------------------------------------- (0010393) laurent (manager) - 2013-05-19 12:35 https://www.opencsw.org/mantis/view.php?id=5007#c10393 ---------------------------------------------------------------------- I've uploaded a modified package with those options specifically taken out. It should now be able to build with GCC. From noreply at opencsw.org Sun May 19 12:36:50 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 12:36:50 +0200 Subject: [bug-notifications] [pidgin 0004469]: upgrade to 2.7, plus relink In-Reply-To: <6bfcf2a8f98a16dfc5ea391985296dfe> Message-ID: <8b3af89ccebbdb28763b8b69df62e4bf@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4469 ====================================================================== Reported By: phil Assigned To: laurent ====================================================================== Project: pidgin Issue ID: 4469 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-06-18 18:56 CEST Last Modified: 2013-05-19 12:36 CEST ====================================================================== Summary: upgrade to 2.7, plus relink Description: Hi Benny, would you please upgrade,and also make sure it relinks to "normal" libs? We dont want to use /opt/csw/X11/lib any more for stuff. ====================================================================== ---------------------------------------------------------------------- (0010394) laurent (manager) - 2013-05-19 12:36 https://www.opencsw.org/mantis/view.php?id=4469#c10394 ---------------------------------------------------------------------- Works good enough for me :-) From noreply at opencsw.org Sun May 19 12:37:30 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 12:37:30 +0200 Subject: [bug-notifications] [pidgin 0004946]: Needs SSL support In-Reply-To: <9d094954d4b9c2808c700b9f26628e7e> Message-ID: <6ae9b4873a80e1e4cdced012f3b2e7c0@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4946 ====================================================================== Reported By: phil Assigned To: laurent ====================================================================== Project: pidgin Issue ID: 4946 Category: packaging Reproducibility: always Severity: block Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-05-16 21:51 CEST Last Modified: 2013-05-19 12:37 CEST ====================================================================== Summary: Needs SSL support Description: Without SSL support, this v2.6.6 binary is less useful than the old v2.0 binary included with solaris 10. (which does have ssl support) ====================================================================== ---------------------------------------------------------------------- (0010395) laurent (manager) - 2013-05-19 12:37 https://www.opencsw.org/mantis/view.php?id=4946#c10395 ---------------------------------------------------------------------- Works for me. From noreply at opencsw.org Sun May 19 15:53:16 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 15:53:16 +0200 Subject: [bug-notifications] [krb5doc 0002645]: The docs package is 2 versions behind the other krb5 packages. In-Reply-To: <943356f71e4adcacda68b20cbd1c368c> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2645 ====================================================================== Reported By: rurouni13 Assigned To: maciej ====================================================================== Project: krb5doc Issue ID: 2645 Category: upgrade Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2007-10-29 12:08 CET Last Modified: 2013-05-19 15:53 CEST ====================================================================== Summary: The docs package is 2 versions behind the other krb5 packages. Description: The docs package is 2 versions behind the other krb5 packages. ====================================================================== ---------------------------------------------------------------------- (0010396) maciej (manager) - 2013-05-19 15:53 https://www.opencsw.org/mantis/view.php?id=2645#c10396 ---------------------------------------------------------------------- We killed the doc package. From noreply at opencsw.org Sun May 19 16:58:11 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 16:58:11 +0200 Subject: [bug-notifications] [fluxbox 0004949]: please update to newer version (1.3.2) In-Reply-To: Message-ID: <353ced29f3d0a1a8bb4446fdcab5b093@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4949 ====================================================================== Reported By: phil Assigned To: maciej ====================================================================== Project: fluxbox Issue ID: 4949 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: closed Resolution: reopened Fixed in Version: ====================================================================== Date Submitted: 2012-05-25 22:35 CEST Last Modified: 2013-05-19 16:58 CEST ====================================================================== Summary: please update to newer version (1.3.2) Description: Current package is now very old. http://fluxbox.org/download/ ====================================================================== ---------------------------------------------------------------------- (0010397) maciej (manager) - 2013-05-19 16:58 https://www.opencsw.org/mantis/view.php?id=4949#c10397 ---------------------------------------------------------------------- I tried the package in a solaris 10 VM, and did not get the fbsetroot error. The script has more places where it's incompatible with /bin/sh on Solaris. To simplify matters, I switched fbsetbg to bash and the script is working not. I also bumped the version to the newest one. The package will be in unstable soon. From noreply at opencsw.org Sun May 19 17:00:21 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 19 May 2013 17:00:21 +0200 Subject: [bug-notifications] [fluxbox 0004949]: please update to newer version (1.3.2) In-Reply-To: Message-ID: <32a2014051f93acb67b9f51850d01a46@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4949 ====================================================================== Reported By: phil Assigned To: maciej ====================================================================== Project: fluxbox Issue ID: 4949 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-05-25 22:35 CEST Last Modified: 2013-05-19 17:00 CEST ====================================================================== Summary: please update to newer version (1.3.2) Description: Current package is now very old. http://fluxbox.org/download/ ====================================================================== ---------------------------------------------------------------------- (0010398) maciej (manager) - 2013-05-19 17:00 https://www.opencsw.org/mantis/view.php?id=4949#c10398 ---------------------------------------------------------------------- s/not/now/ From noreply at opencsw.org Mon May 20 08:57:41 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 20 May 2013 08:57:41 +0200 Subject: [bug-notifications] [ap2_modphp5 0005077]: libphp5.so missing PHP function Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5077 ====================================================================== Reported By: epkblid Assigned To: ====================================================================== Project: ap2_modphp5 Issue ID: 5077 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-20 08:57 CEST Last Modified: 2013-05-20 08:57 CEST ====================================================================== Summary: libphp5.so missing PHP function Description: On x86 solaris 10 libphp5.so is missing all PHP session functions ====================================================================== From noreply at opencsw.org Mon May 20 19:48:07 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 20 May 2013 19:48:07 +0200 Subject: [bug-notifications] [fluxbox 0005078]: fluxbox-generate_menu broken Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5078 ====================================================================== Reported By: phil Assigned To: ====================================================================== Project: fluxbox Issue ID: 5078 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-20 19:48 CEST Last Modified: 2013-05-20 19:48 CEST ====================================================================== Summary: fluxbox-generate_menu broken Description: current version, spews grep: illegal option -- o Usage: grep [-c|-l|-q] [-bhinsvwx] pattern_list [file ...] grep [-c|-l|-q] [-bhinsvwx] [-e pattern_list]... [-f pattern_file]... [file...] I think this is because of a Solaris "fix", that breaks it. PATH=/usr/xpg4/bin:$PATH # just for xpg4 'id'. Sol11 is fine with /bin/id So, it "fixes" id, but breaks the grep call, since /usr/xpg4/bin/grep ====================================================================== From noreply at opencsw.org Tue May 21 11:54:51 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 21 May 2013 11:54:51 +0200 Subject: [bug-notifications] [python 0003054]: Add 64-bit support In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3054 ====================================================================== Reported By: harpchad Assigned To: maciej ====================================================================== Project: python Issue ID: 3054 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-02 20:00 CET Last Modified: 2013-05-21 11:54 CEST ====================================================================== Summary: Add 64-bit support Description: Need a 64-bit libpython for dependent packages. ====================================================================== ---------------------------------------------------------------------- (0008724) gadavis (developer) - 2011-01-21 22:50 https://www.opencsw.org/mantis/view.php?id=3054#c8724 ---------------------------------------------------------------------- +1 on this issue. From noreply at opencsw.org Tue May 21 11:55:33 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 21 May 2013 11:55:33 +0200 Subject: [bug-notifications] [python 0003054]: Add 64-bit support In-Reply-To: Message-ID: <2bdb43eef511770f360e57eb57bb5781@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3054 ====================================================================== Reported By: harpchad Assigned To: maciej ====================================================================== Project: python Issue ID: 3054 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-02 20:00 CET Last Modified: 2013-05-21 11:55 CEST ====================================================================== Summary: Add 64-bit support Description: Need a 64-bit libpython for dependent packages. ====================================================================== ---------------------------------------------------------------------- (0010400) maciej (manager) - 2013-05-21 11:55 https://www.opencsw.org/mantis/view.php?id=3054#c10400 ---------------------------------------------------------------------- I did some research into it in January this year; I've just sent a question to python-list, let's see what the upstream folks will say. http://mail.python.org/pipermail/python-list/2013-May/647197.html From noreply at opencsw.org Tue May 21 13:21:01 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 21 May 2013 13:21:01 +0200 Subject: [bug-notifications] [ap2_modphp5 0005077]: libphp5.so missing PHP function In-Reply-To: Message-ID: <2f5f0cbc2629427d469d95ff97cc5c1d@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5077 ====================================================================== Reported By: epkblid Assigned To: ====================================================================== Project: ap2_modphp5 Issue ID: 5077 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-20 08:57 CEST Last Modified: 2013-05-21 13:21 CEST ====================================================================== Summary: libphp5.so missing PHP function Description: On x86 solaris 10 libphp5.so is missing all PHP session functions ====================================================================== ---------------------------------------------------------------------- (0010401) dam (administrator) - 2013-05-21 13:21 https://www.opencsw.org/mantis/view.php?id=5077#c10401 ---------------------------------------------------------------------- Please make sure that you actually installed CSWphp5-session From noreply at opencsw.org Wed May 22 12:59:16 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 22 May 2013 12:59:16 +0200 Subject: [bug-notifications] [libcups2 0005079]: Please provide lib in 64 bit Message-ID: <191bff679b2a9cc51a8a62fc6e5cdd12@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5079 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: libcups2 Issue ID: 5079 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-22 12:59 CEST Last Modified: 2013-05-22 12:59 CEST ====================================================================== Summary: Please provide lib in 64 bit Description: Please provide libcups.so.2 in 64 bit as I need that for a 64 bit ghostscript. ====================================================================== From noreply at opencsw.org Wed May 22 22:13:40 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 22 May 2013 22:13:40 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: <9668ba97bf2ae425f467c273e44d7b9d@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-22 22:13 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010402) markp (manager) - 2013-05-22 22:13 https://www.opencsw.org/mantis/view.php?id=5066#c10402 ---------------------------------------------------------------------- Looks like this was a Puppet bug, and it was fixed in 3.2.1 - I'm just rolling the package now. ========================= ## Puppet 3.2.1 Release Notes ## ========================= ### Issues fixed: * [Bug https://www.opencsw.org/mantis/view.php?id=19760]: install sun packages failed with: `Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message` From noreply at opencsw.org Wed May 22 22:40:08 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 22 May 2013 22:40:08 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: <9e66612275c4cb24c60198b3fce4ced1@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-22 22:40 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010403) markp (manager) - 2013-05-22 22:40 https://www.opencsw.org/mantis/view.php?id=5066#c10403 ---------------------------------------------------------------------- http://buildfarm.opencsw.org/experimental.html#markp From noreply at opencsw.org Thu May 23 11:06:28 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 23 May 2013 11:06:28 +0200 Subject: [bug-notifications] [puppetmaster3 0005066]: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No In-Reply-To: <7a70649d3f62b9e7a0dd1259435990a4> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5066 ====================================================================== Reported By: villiboy Assigned To: markp ====================================================================== Project: puppetmaster3 Issue ID: 5066 Category: Reproducibility: always Severity: major Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-04-09 11:22 CEST Last Modified: 2013-05-23 11:06 CEST ====================================================================== Summary: install solaris packages failed with: Error: Could not evaluate: Unable to get information about package XXX because of: No Description: Hi all, we want to install diffrent sun packages with puppet. In version 2.7 it works but now with 3.1.1 it fails. # EXAMPLE MESSGAGE: Error: /Stage[main]/Inf_sol10defaultpkg/Package[SMCcurl]: Could not evaluate: Unable to get information about package SMCcurl because of: No message package {?SMCcurl?: ensure => latest, source => ?/rozrhstgp01/unix-ch/puppet/packages/sol10defaultpkg/curl-7.26.0-sol10-x86-local?, adminfile => ?/var/sadm/install/admin/pkgadmfile_sol10defaultpkg?, require => Package[?CSWlibgcc-s1?], } ====================================================================== ---------------------------------------------------------------------- (0010404) villiboy (reporter) - 2013-05-23 11:06 https://www.opencsw.org/mantis/view.php?id=5066#c10404 ---------------------------------------------------------------------- Hi Marc, great job, it works again. I do a lot of testing today and i couldn't see any other bugs at the moment. Thanks ... Regards, Martin From noreply at opencsw.org Sun May 26 10:54:02 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 26 May 2013 10:54:02 +0200 Subject: [bug-notifications] [mysql5 0004971]: MySQL 5.5 ignores correct elements in the configuration file (and a fix) In-Reply-To: <590a3d858e5878085d3c723ebb4230e7> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4971 ====================================================================== Reported By: laurent Assigned To: laurent ====================================================================== Project: mysql5 Issue ID: 4971 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-07-03 17:42 CEST Last Modified: 2013-05-26 10:54 CEST ====================================================================== Summary: MySQL 5.5 ignores correct elements in the configuration file (and a fix) Description: I have added configuration elements in the /etc/opt/csw/my.cnf files that are ignored: [mysqld] datadir = /path/to/mysql5 pid-file = /path/to/mysql5/mysql.pid [mysqld_safe] log-error = /path/to/mysqld.err Other elements in the same files are properly taken into account, so the file itself is read properly. On further investigation, it appears that those elements are in fact handled by the start script. The current svc-cswmysql5 method is based on a script that is too old and does not take those into account. Workaround seems to be using a mysql5rc file that is sourced in the method script, but this is awkward, as the MySQL documentation doesn't point to those. ====================================================================== From noreply at opencsw.org Sun May 26 10:54:47 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 26 May 2013 10:54:47 +0200 Subject: [bug-notifications] [fluxbox 0005078]: fluxbox-generate_menu broken In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5078 ====================================================================== Reported By: phil Assigned To: maciej ====================================================================== Project: fluxbox Issue ID: 5078 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2013-05-20 19:48 CEST Last Modified: 2013-05-26 10:54 CEST ====================================================================== Summary: fluxbox-generate_menu broken Description: current version, spews grep: illegal option -- o Usage: grep [-c|-l|-q] [-bhinsvwx] pattern_list [file ...] grep [-c|-l|-q] [-bhinsvwx] [-e pattern_list]... [-f pattern_file]... [file...] I think this is because of a Solaris "fix", that breaks it. PATH=/usr/xpg4/bin:$PATH # just for xpg4 'id'. Sol11 is fine with /bin/id So, it "fixes" id, but breaks the grep call, since /usr/xpg4/bin/grep ====================================================================== ---------------------------------------------------------------------- (0010405) maciej (manager) - 2013-05-26 10:54 https://www.opencsw.org/mantis/view.php?id=5078#c10405 ---------------------------------------------------------------------- No news ? I consider it good news. If there's a still a problem, please reopen. From noreply at opencsw.org Sun May 26 10:57:52 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 26 May 2013 10:57:52 +0200 Subject: [bug-notifications] [mysql5 0004971]: MySQL 5.5 ignores correct elements in the configuration file (and a fix) In-Reply-To: <590a3d858e5878085d3c723ebb4230e7> Message-ID: <29db10c47a467d4131390efb7b15832f@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4971 ====================================================================== Reported By: laurent Assigned To: laurent ====================================================================== Project: mysql5 Issue ID: 4971 Category: regular use Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-07-03 17:42 CEST Last Modified: 2013-05-26 10:57 CEST ====================================================================== Summary: MySQL 5.5 ignores correct elements in the configuration file (and a fix) Description: I have added configuration elements in the /etc/opt/csw/my.cnf files that are ignored: [mysqld] datadir = /path/to/mysql5 pid-file = /path/to/mysql5/mysql.pid [mysqld_safe] log-error = /path/to/mysqld.err Other elements in the same files are properly taken into account, so the file itself is read properly. On further investigation, it appears that those elements are in fact handled by the start script. The current svc-cswmysql5 method is based on a script that is too old and does not take those into account. Workaround seems to be using a mysql5rc file that is sourced in the method script, but this is awkward, as the MySQL documentation doesn't point to those. ====================================================================== ---------------------------------------------------------------------- (0010406) laurent (manager) - 2013-05-26 10:57 https://www.opencsw.org/mantis/view.php?id=4971#c10406 ---------------------------------------------------------------------- Change was integrated and works well. From noreply at opencsw.org Sun May 26 16:07:34 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 26 May 2013 16:07:34 +0200 Subject: [bug-notifications] [fluxbox 0005078]: fluxbox-generate_menu broken In-Reply-To: Message-ID: The following issue has been REOPENED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5078 ====================================================================== Reported By: phil Assigned To: maciej ====================================================================== Project: fluxbox Issue ID: 5078 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-05-20 19:48 CEST Last Modified: 2013-05-26 16:07 CEST ====================================================================== Summary: fluxbox-generate_menu broken Description: current version, spews grep: illegal option -- o Usage: grep [-c|-l|-q] [-bhinsvwx] pattern_list [file ...] grep [-c|-l|-q] [-bhinsvwx] [-e pattern_list]... [-f pattern_file]... [file...] I think this is because of a Solaris "fix", that breaks it. PATH=/usr/xpg4/bin:$PATH # just for xpg4 'id'. Sol11 is fine with /bin/id So, it "fixes" id, but breaks the grep call, since /usr/xpg4/bin/grep ====================================================================== ---------------------------------------------------------------------- (0010407) phil (reporter) - 2013-05-26 16:07 https://www.opencsw.org/mantis/view.php?id=5078#c10407 ---------------------------------------------------------------------- For the record, I didnt get an email when you added your first note to the case. That's the only reason I'm adding this note, though. I cant test for a few days, but I'll take your word that it's fixed. From noreply at opencsw.org Sun May 26 20:00:51 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 26 May 2013 20:00:51 +0200 Subject: [bug-notifications] [gitk 0005080]: gitk UI is in Greek (on US English Solaris 10) Message-ID: <198ede32ca167c8d3f146f3f8d17794a@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5080 ====================================================================== Reported By: Tad Marshall Assigned To: ====================================================================== Project: gitk Issue ID: 5080 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-26 20:00 CEST Last Modified: 2013-05-26 20:00 CEST ====================================================================== Summary: gitk UI is in Greek (on US English Solaris 10) Description: I installed Solaris 10 (64-bit) in VirtualBox 4.2.12 and added many OpenCSW packages. All are working properly for me with the exception of gitk, which displays its user interface in Greek. The display of changes in the git repo is fine; only the program's UI is in Greek. ====================================================================== From noreply at opencsw.org Thu May 30 13:51:12 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 30 May 2013 13:51:12 +0200 Subject: [bug-notifications] [dbus 0005081]: group name too long Message-ID: <0c8fe8f6b3230a76acafaae11e8b5b99@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5081 ====================================================================== Reported By: pfelecan Assigned To: ====================================================================== Project: dbus Issue ID: 5081 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2013-05-30 13:51 CEST Last Modified: 2013-05-30 13:51 CEST ====================================================================== Summary: group name too long Description: On SunOS 5.10 Generic_147441-01 i86pc i386 i86pc Solaris I get: => Installing CSWdbus-1.5.6,REV=2011.08.12 (3/29) ... Please see /opt/csw/share/doc/dbus/license for license information. Installing class ... UX: groupadd: messagebus name too long. Group messagebus has been added UX: /usr/sbin/useradd: messagebus name too long. UX: /usr/sbin/useradd: messagebus name too long. User messagebus has been added ====================================================================== From noreply at opencsw.org Thu May 30 19:55:39 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 30 May 2013 19:55:39 +0200 Subject: [bug-notifications] [dbus 0005081]: group name too long In-Reply-To: <0b52e9a85cb3fa86c8abe8cfca99677d> Message-ID: <222ec76e8878d45b4cedd6aa8ad5e3f0@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5081 ====================================================================== Reported By: pfelecan Assigned To: dam ====================================================================== Project: dbus Issue ID: 5081 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-05-30 13:51 CEST Last Modified: 2013-05-30 19:55 CEST ====================================================================== Summary: group name too long Description: On SunOS 5.10 Generic_147441-01 i86pc i386 i86pc Solaris I get: => Installing CSWdbus-1.5.6,REV=2011.08.12 (3/29) ... Please see /opt/csw/share/doc/dbus/license for license information. Installing class ... UX: groupadd: messagebus name too long. Group messagebus has been added UX: /usr/sbin/useradd: messagebus name too long. UX: /usr/sbin/useradd: messagebus name too long. User messagebus has been added ====================================================================== From noreply at opencsw.org Thu May 30 19:57:14 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 30 May 2013 19:57:14 +0200 Subject: [bug-notifications] [dbus 0005081]: group name too long In-Reply-To: <0b52e9a85cb3fa86c8abe8cfca99677d> Message-ID: <38a274e8f51ca09531655d0c2b401c03@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5081 ====================================================================== Reported By: pfelecan Assigned To: dam ====================================================================== Project: dbus Issue ID: 5081 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-05-30 13:51 CEST Last Modified: 2013-05-30 19:57 CEST ====================================================================== Summary: group name too long Description: On SunOS 5.10 Generic_147441-01 i86pc i386 i86pc Solaris I get: => Installing CSWdbus-1.5.6,REV=2011.08.12 (3/29) ... Please see /opt/csw/share/doc/dbus/license for license information. Installing class ... UX: groupadd: messagebus name too long. Group messagebus has been added UX: /usr/sbin/useradd: messagebus name too long. UX: /usr/sbin/useradd: messagebus name too long. User messagebus has been added ====================================================================== ---------------------------------------------------------------------- (0010408) dam (administrator) - 2013-05-30 19:57 https://www.opencsw.org/mantis/view.php?id=5081#c10408 ---------------------------------------------------------------------- Hi Peter, I am aware of the excedding length for user and group, but it is the standard and doesn't impose any problems I decided to keep it that way. Please also note that there is an experimental current dbus available: http://buildfarm.opencsw.org/experimental.html#dbus If you feel like it please give it a try. Best regards -- Dago From noreply at opencsw.org Fri May 31 10:04:32 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 31 May 2013 10:04:32 +0200 Subject: [bug-notifications] [libcups 0003663]: Please provide 64 bit libs In-Reply-To: <536d30707438470e1c8706d6ba8aeb6b> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3663 ====================================================================== Reported By: dam Assigned To: maciej ====================================================================== Project: libcups Issue ID: 3663 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: suspended Fixed in Version: ====================================================================== Date Submitted: 2009-05-10 19:49 CEST Last Modified: 2013-05-31 10:04 CEST ====================================================================== Summary: Please provide 64 bit libs Description: Please provide 64 bit libs, they are needed for gtk+ ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- child of 0003996 missing printbackend ====================================================================== ---------------------------------------------------------------------- (0010409) cgrzemba (developer) - 2013-05-31 10:04 https://www.opencsw.org/mantis/view.php?id=3663#c10409 ---------------------------------------------------------------------- done in version 1.5.3 From noreply at opencsw.org Fri May 31 10:04:34 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 31 May 2013 10:04:34 +0200 Subject: [bug-notifications] [gtk2 0003996]: missing printbackend In-Reply-To: <6ceb454748ad96fa5cd3416db8a68ff7> Message-ID: <91104b585a4fa1c34015438092cb30c8@www.opencsw.org> The RELATED issue 0003663 has been CLOSED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3996 ====================================================================== Reported By: schwindt Assigned To: dam ====================================================================== Project: gtk2 Issue ID: 3996 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-11-05 00:41 CET Last Modified: 2010-09-20 15:22 CEST ====================================================================== Summary: missing printbackend Description: /opt/csw/lib/gtk-2.0/2.10.0/printbackends/libprintbackend-cups.so is missing. it seems cups was not found at compile time. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- parent of 0003663 Please provide 64 bit libs ====================================================================== ---------------------------------------------------------------------- (0008292) dam (administrator) - 2010-09-20 15:22 https://www.opencsw.org/mantis/view.php?id=3996#c8292 ---------------------------------------------------------------------- For now I added CUPS for just 32 bit. Feel free to try the packages from my experimental: http://buildfarm.opencsw.org/experimental.html#dam From noreply at opencsw.org Fri May 31 10:11:29 2013 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 31 May 2013 10:11:29 +0200 Subject: [bug-notifications] [qt4_dev 0005075]: Qt packaging doesn't respect our file system layout standard In-Reply-To: Message-ID: <611e17156c7b8930766581cba98e78cb@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5075 ====================================================================== Reported By: pfelecan Assigned To: cgrzemba ====================================================================== Project: qt4_dev Issue ID: 5075 Category: Reproducibility: always Severity: tweak Priority: high Status: acknowledged ====================================================================== Date Submitted: 2013-05-11 10:31 CEST Last Modified: 2013-05-31 10:11 CEST ====================================================================== Summary: Qt packaging doesn't respect our file system layout standard Description: The package installs a lot of directories directly in the root of Open CSW tree, /opt/csw, e.g. prototypes, mkspecs, &c. This rises errors in checkpkg, e.g. when a dynamic shared object is installed in /opt/csw/prototypes it is flagged with the "binary-architecture-does-not-match-placement" tag. After having discussed the issue on the "devel" mailing list, http://lists.opencsw.org/pipermail/devel/2013-May/026324.html, I propose to modify the recipe in order to install the various component in appropriate directories. For this, you can use inspiration given by Debian's packaging, http://packages.debian.org/wheezy/i386/python-qt4/filelist ====================================================================== ---------------------------------------------------------------------- (0010410) cgrzemba (manager) - 2013-05-31 10:11 https://www.opencsw.org/mantis/view.php?id=5075#c10410 ---------------------------------------------------------------------- Have it done and up it to experimental, BUT: - qtdemo do not found help docs - bins on sparc stop with core dumps