From bug-notifications at lists.opencsw.org Fri Nov 1 09:27:22 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 1 Nov 2013 09:27:22 +0100 Subject: [libgslcblas0 0005120]: Please provide 64 bit library In-Reply-To: <808ad6f9f709d4c36a26f0fd186fc823> Message-ID: <8f020b421448b8bfa6bee22df55c1fd4@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5120 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: libgslcblas0 Issue ID: 5120 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-10-31 16:51 CET Last Modified: 2013-11-01 09:27 CET ====================================================================== Summary: Please provide 64 bit library Description: Hi Peter, I am working on packaging pspp (an spss clone) and would need a 64 bit libgslcblas.so.0 for that. Could you please respin CSWlibgslcblas0 with 64 but included? Best regards -- Dago ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 1 09:28:16 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 1 Nov 2013 09:28:16 +0100 Subject: [libgslcblas0 0005120]: Please provide 64 bit library In-Reply-To: <808ad6f9f709d4c36a26f0fd186fc823> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5120 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: libgslcblas0 Issue ID: 5120 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-10-31 16:51 CET Last Modified: 2013-11-01 09:28 CET ====================================================================== Summary: Please provide 64 bit library Description: Hi Peter, I am working on packaging pspp (an spss clone) and would need a 64 bit libgslcblas.so.0 for that. Could you please respin CSWlibgslcblas0 with 64 but included? Best regards -- Dago ====================================================================== ---------------------------------------------------------------------- (0010623) pfelecan (manager) - 2013-11-01 09:28 https://www.opencsw.org/mantis/view.php?id=5120#c10623 ---------------------------------------------------------------------- you use so huge data sets that you need this? well, I'm doing it. From bug-notifications at lists.opencsw.org Fri Nov 1 13:51:58 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 1 Nov 2013 13:51:58 +0100 Subject: [libgslcblas0 0005120]: Please provide 64 bit library In-Reply-To: <808ad6f9f709d4c36a26f0fd186fc823> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5120 ====================================================================== Reported By: dam Assigned To: pfelecan ====================================================================== Project: libgslcblas0 Issue ID: 5120 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2013-10-31 16:51 CET Last Modified: 2013-11-01 13:51 CET ====================================================================== Summary: Please provide 64 bit library Description: Hi Peter, I am working on packaging pspp (an spss clone) and would need a 64 bit libgslcblas.so.0 for that. Could you please respin CSWlibgslcblas0 with 64 but included? Best regards -- Dago ====================================================================== ---------------------------------------------------------------------- (0010624) pfelecan (manager) - 2013-11-01 13:51 https://www.opencsw.org/mantis/view.php?id=5120#c10624 ---------------------------------------------------------------------- uploaded packages providing 64bit libraries From bug-notifications at lists.opencsw.org Sun Nov 3 00:33:07 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sun, 3 Nov 2013 00:33:07 +0100 Subject: [netsnmp 0004408]: Fix 64bit counters in Interface Traffic graphs. In-Reply-To: Message-ID: <620ba64fa708ad53e234dac9d817e58e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4408 ====================================================================== Reported By: niranjan Assigned To: cgrzemba ====================================================================== Project: netsnmp Issue ID: 4408 Category: upgrade Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-04-26 01:50 CEST Last Modified: 2013-11-03 00:33 CET ====================================================================== Summary: Fix 64bit counters in Interface Traffic graphs. Description: I'm using latest CSWnetsnmp version to fix the netinterface 64bit Counter, even latest version also not showing 64bit counter, if I serach for 64bit Counter I'm getting only the following message. VERSION 5.4.2.1,REV=2010.03.16 $ snmpwalk -v 2c -c public localhost|grep Counetr64 HOST-RESOURCES-MIB::hrSWRunParameters.15785 = STRING: "Counetr64" I want fix gigabit ethernet interface traffic graph, please help me out on this. ====================================================================== ---------------------------------------------------------------------- (0010625) kenmays (reporter) - 2013-11-03 00:33 https://www.opencsw.org/mantis/view.php?id=4408#c10625 ---------------------------------------------------------------------- Please update to Net-SNMP 5.7.2. {only 5.6.2 & 5.7.2 are currently supported by the developers} From bug-notifications at lists.opencsw.org Sun Nov 3 09:41:08 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sun, 3 Nov 2013 09:41:08 +0100 Subject: [gtk2 0005118]: GTK 3 In-Reply-To: <14457376bfbae9c063660169c674b8ec> Message-ID: <48c2e081ba69b9b833c083fdf269960b@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5118 ====================================================================== Reported By: pfelecan Assigned To: raos ====================================================================== Project: gtk2 Issue ID: 5118 Category: upgrade Reproducibility: N/A Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-10-31 13:28 CET Last Modified: 2013-11-03 09:41 CET ====================================================================== Summary: GTK 3 Description: Any chance to have a GTK 3 package ? ====================================================================== From bug-notifications at lists.opencsw.org Wed Nov 6 11:57:48 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 6 Nov 2013 11:57:48 +0100 Subject: [gtk2 0005118]: GTK 3 In-Reply-To: <14457376bfbae9c063660169c674b8ec> Message-ID: <57b9d764ad5a927a5212c8294d98e1e4@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5118 ====================================================================== Reported By: pfelecan Assigned To: raos ====================================================================== Project: gtk2 Issue ID: 5118 Category: upgrade Reproducibility: N/A Severity: minor Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2013-10-31 13:28 CET Last Modified: 2013-11-06 11:57 CET ====================================================================== Summary: GTK 3 Description: Any chance to have a GTK 3 package ? ====================================================================== ---------------------------------------------------------------------- (0010627) raos (manager) - 2013-11-06 11:57 https://www.opencsw.org/mantis/view.php?id=5118#c10627 ---------------------------------------------------------------------- Currently, GTK3+ chokes on not finding XInput2. So far, I don't know whether getting XInput2 to work on Solaris/OpenCSW is a big deal. I'll keep you posted. From bug-notifications at lists.opencsw.org Fri Nov 8 12:27:55 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 12:27:55 +0100 Subject: [gcc4core 0005116]: Link /opt/csw/lib/gcc/i386-pc-solaris2.10/4.8.1/include-fixed/X11 points to nowhere In-Reply-To: <7b23dfeba1176364fd0b2fa6e113f66a> Message-ID: <451738bc49010573bf7c32a5435007ac@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5116 ====================================================================== Reported By: dam Assigned To: dam ====================================================================== Project: gcc4core Issue ID: 5116 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-10-14 17:23 CEST Last Modified: 2013-11-08 12:27 CET ====================================================================== Summary: Link /opt/csw/lib/gcc/i386-pc-solaris2.10/4.8.1/include-fixed/X11 points to nowhere Description: The link /opt/csw/lib/gcc/i386-pc-solaris2.10/4.8.1/include-fixed/X11 points to root/usr/openwin/include/X11 which does not exist. The issue only appears in i386. It does also appear in the latest 4.8.0, but not the 4.8.0 version before that. ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 8 14:00:42 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:00:42 +0100 Subject: [cas_initsmf 0005121]: Install package problem Message-ID: <0b2d14da543bc939d1468bb163fc2c29@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5121 ====================================================================== Reported By: pcfung Assigned To: ====================================================================== Project: cas_initsmf Issue ID: 5121 Category: regular use Reproducibility: unable to reproduce Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-08 14:00 CET Last Modified: 2013-11-08 14:00 CET ====================================================================== Summary: Install package problem Description: Hi, i am using solaris 10 x86 and installing the apache2 on my zone with some error massage shown:(Debug Mode=ON) # /opt/csw/bin/pkgutil -i -y apache2 Solving needed dependencies ... Solving dependency order ... 30 CURRENT packages: CSWalternatives-1.1.1,REV=2011.05.31 CSWapache2-utils-2.2.22,REV=2012.06.01 CSWapache2c-2.2.22,REV=2012.06.01 CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWcas-initsmf-1.49,REV=2013.03.13 CSWcas-postmsg-1.42,REV=2010.11.26 CSWcas-preserveconf-1.49,REV=2013.03.13 CSWcommon-1.5,REV=2010.12.11 CSWiconv-1.14,REV=2011.08.08 CSWisaexec-0.2,REV=2009.03.26 CSWlibapr-dev-1.4.6,REV=2012.03.03 CSWlibapr1-0-1.4.6,REV=2012.03.03 CSWlibaprutil-dev-1.3.12,REV=2011.07.26 CSWlibaprutil1-0-1.3.12,REV=2011.07.26 CSWlibaprutil1-dbm-db-1.3.12,REV=2011.07.26 CSWlibaprutil1-ldap-1.3.12,REV=2011.07.26 CSWlibcharset1-1.14,REV=2011.08.07 CSWlibexpat1-2.1.0,REV=2013.01.01 CSWlibgdbm4-1.9,REV=2011.10.24 CSWlibiconv2-1.14,REV=2011.08.07 CSWliblber2-4-2-2.4.32,REV=2012.11.05 CSWlibldap-r2-4-2-2.4.32,REV=2012.11.05 CSWlibldap2-4-2-2.4.32,REV=2012.11.05 CSWlibsasl2-2-2.1.25,REV=2012.05.06 CSWlibssl1-0-0-1.0.1e,REV=2013.03.30 CSWlibz1-1.2.7,REV=2012.06.14 CSWoldaprt-2.4.32,REV=2012.11.10 CSWopenssl-utils-1.0.1e,REV=2013.03.30 CSWosslutils-0.9.8x,REV=2012.05.12 CSWperl-5.10.1,REV=2012.07.24 Install 1 NEW packages: CSWapache2-2.2.22,REV=2012.06.01 (opencsw/testing) Total size: 854.7 KB => Fetching CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... => Installing CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... Please see /opt/csw/share/doc/apache2/license for license information. Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... PACKAGE: CSWapache2 SMF: yes Installing class ... SRC: /var/tmp/ztempBAA9ya4Xn/CSWapache2/root/etc/opt/csw/init.d/cswapache2 DEST: /etc/opt/csw/init.d/cswapache2 Creating /var/opt/csw/svc/manifest/network ... FMRI: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create //var/opt/csw/svc/method/svc-cswapache2: No such file or directory chmod: WARNING: can't access //var/opt/csw/svc/method/svc-cswapache2 chown: //var/opt/csw/svc/method/svc-cswapache2: No such file or directory Creating manifest ... egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 MANIFEST: /var/opt/csw/svc/manifest/network/cswapache2.xml Configuring service in SMF ... CSWapache2 is using Service Management Facility. The FMRI is svc:/network/cswapache2:default Clearing svc:/network/cswapache2 in case it's in the maintenance state... Enabling svc:/network/cswapache2 ... ERROR: attribute verification of failed pathname does not exist unable to create symbolic link to Installing class ... Hello CSW User/Sysadmin, Please note that recent changes may affect the way you're used to working with the CSW apache2 packages. In the past, CSWap2prefork and CSWap2worker delivered a specific mpm module for use with apache2. We now ship the prefork mpm as part of CSWapache2 while the worker mpm remains in CSWap2worker. Each httpd mpm is installed using the new alternatives framework. When CSWap2worker is installed, it registers a higher priority httpd, thus it is activated as httpd (manual restart required). You can change this at any time using the alternatives command. See /opt/csw/sbin/alternatives --help for information on how you can do this. Thanks -The OpenCSW apache2 team. Checking configuration files: Copying CSW templates: preserving //opt/csw/apache2/share/htdocs/index.html preserving //opt/csw/apache2/etc/extra/httpd-autoindex.conf preserving //opt/csw/apache2/etc/extra/httpd-dav.conf preserving //opt/csw/apache2/etc/extra/httpd-default.conf preserving //opt/csw/apache2/etc/extra/httpd-info.conf preserving //opt/csw/apache2/etc/extra/httpd-languages.conf preserving //opt/csw/apache2/etc/extra/httpd-multilang-errordoc.conf preserving //opt/csw/apache2/etc/extra/httpd-userdir.conf preserving //opt/csw/apache2/etc/extra/httpd-vhosts.conf preserving //opt/csw/apache2/etc/magic preserving //opt/csw/apache2/etc/mime.types preserving //opt/csw/apache2/etc/envvars preserving //opt/csw/apache2/etc/envvars-std Installation of was successful. ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 8 14:12:16 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:12:16 +0100 Subject: [cas_initsmf 0005121]: Install package problem In-Reply-To: Message-ID: <6b15f334f9d94fe12bd75c3b27123d74@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5121 ====================================================================== Reported By: pcfung Assigned To: ====================================================================== Project: cas_initsmf Issue ID: 5121 Category: regular use Reproducibility: unable to reproduce Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-08 14:00 CET Last Modified: 2013-11-08 14:12 CET ====================================================================== Summary: Install package problem Description: Hi, i am using solaris 10 x86 and installing the apache2 on my zone with some error massage shown:(Debug Mode=ON) # /opt/csw/bin/pkgutil -i -y apache2 Solving needed dependencies ... Solving dependency order ... 30 CURRENT packages: CSWalternatives-1.1.1,REV=2011.05.31 CSWapache2-utils-2.2.22,REV=2012.06.01 CSWapache2c-2.2.22,REV=2012.06.01 CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWcas-initsmf-1.49,REV=2013.03.13 CSWcas-postmsg-1.42,REV=2010.11.26 CSWcas-preserveconf-1.49,REV=2013.03.13 CSWcommon-1.5,REV=2010.12.11 CSWiconv-1.14,REV=2011.08.08 CSWisaexec-0.2,REV=2009.03.26 CSWlibapr-dev-1.4.6,REV=2012.03.03 CSWlibapr1-0-1.4.6,REV=2012.03.03 CSWlibaprutil-dev-1.3.12,REV=2011.07.26 CSWlibaprutil1-0-1.3.12,REV=2011.07.26 CSWlibaprutil1-dbm-db-1.3.12,REV=2011.07.26 CSWlibaprutil1-ldap-1.3.12,REV=2011.07.26 CSWlibcharset1-1.14,REV=2011.08.07 CSWlibexpat1-2.1.0,REV=2013.01.01 CSWlibgdbm4-1.9,REV=2011.10.24 CSWlibiconv2-1.14,REV=2011.08.07 CSWliblber2-4-2-2.4.32,REV=2012.11.05 CSWlibldap-r2-4-2-2.4.32,REV=2012.11.05 CSWlibldap2-4-2-2.4.32,REV=2012.11.05 CSWlibsasl2-2-2.1.25,REV=2012.05.06 CSWlibssl1-0-0-1.0.1e,REV=2013.03.30 CSWlibz1-1.2.7,REV=2012.06.14 CSWoldaprt-2.4.32,REV=2012.11.10 CSWopenssl-utils-1.0.1e,REV=2013.03.30 CSWosslutils-0.9.8x,REV=2012.05.12 CSWperl-5.10.1,REV=2012.07.24 Install 1 NEW packages: CSWapache2-2.2.22,REV=2012.06.01 (opencsw/testing) Total size: 854.7 KB => Fetching CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... => Installing CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... Please see /opt/csw/share/doc/apache2/license for license information. Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... PACKAGE: CSWapache2 SMF: yes Installing class ... SRC: /var/tmp/ztempBAA9ya4Xn/CSWapache2/root/etc/opt/csw/init.d/cswapache2 DEST: /etc/opt/csw/init.d/cswapache2 Creating /var/opt/csw/svc/manifest/network ... FMRI: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create //var/opt/csw/svc/method/svc-cswapache2: No such file or directory chmod: WARNING: can't access //var/opt/csw/svc/method/svc-cswapache2 chown: //var/opt/csw/svc/method/svc-cswapache2: No such file or directory Creating manifest ... egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 MANIFEST: /var/opt/csw/svc/manifest/network/cswapache2.xml Configuring service in SMF ... CSWapache2 is using Service Management Facility. The FMRI is svc:/network/cswapache2:default Clearing svc:/network/cswapache2 in case it's in the maintenance state... Enabling svc:/network/cswapache2 ... ERROR: attribute verification of failed pathname does not exist unable to create symbolic link to Installing class ... Hello CSW User/Sysadmin, Please note that recent changes may affect the way you're used to working with the CSW apache2 packages. In the past, CSWap2prefork and CSWap2worker delivered a specific mpm module for use with apache2. We now ship the prefork mpm as part of CSWapache2 while the worker mpm remains in CSWap2worker. Each httpd mpm is installed using the new alternatives framework. When CSWap2worker is installed, it registers a higher priority httpd, thus it is activated as httpd (manual restart required). You can change this at any time using the alternatives command. See /opt/csw/sbin/alternatives --help for information on how you can do this. Thanks -The OpenCSW apache2 team. Checking configuration files: Copying CSW templates: preserving //opt/csw/apache2/share/htdocs/index.html preserving //opt/csw/apache2/etc/extra/httpd-autoindex.conf preserving //opt/csw/apache2/etc/extra/httpd-dav.conf preserving //opt/csw/apache2/etc/extra/httpd-default.conf preserving //opt/csw/apache2/etc/extra/httpd-info.conf preserving //opt/csw/apache2/etc/extra/httpd-languages.conf preserving //opt/csw/apache2/etc/extra/httpd-multilang-errordoc.conf preserving //opt/csw/apache2/etc/extra/httpd-userdir.conf preserving //opt/csw/apache2/etc/extra/httpd-vhosts.conf preserving //opt/csw/apache2/etc/magic preserving //opt/csw/apache2/etc/mime.types preserving //opt/csw/apache2/etc/envvars preserving //opt/csw/apache2/etc/envvars-std Installation of was successful. ====================================================================== ---------------------------------------------------------------------- (0010628) pcfung (reporter) - 2013-11-08 14:12 https://www.opencsw.org/mantis/view.php?id=5121#c10628 ---------------------------------------------------------------------- Hi, Please note!! i manually create a folder 'method' on /var/opt/csw/svc/ and install again. all problems were fixed. 'svcs' & 'svcadm' can run correctly now. From bug-notifications at lists.opencsw.org Fri Nov 8 14:24:20 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:24:20 +0100 Subject: [cswclassutils 0004838]: cswinitsmf saved state does not work any longer In-Reply-To: <0ee940eaf5d664f58cd4eb90bb915ee1> Message-ID: <663f2eb2f881655509079aa019a587c8@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4838 ====================================================================== Reported By: bonivart Assigned To: bonivart ====================================================================== Project: cswclassutils Issue ID: 4838 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-09-29 18:41 CEST Last Modified: 2013-11-08 14:24 CET ====================================================================== Summary: cswinitsmf saved state does not work any longer Description: cswinitsmf used to save state of the SMF services so if you upgraded you got the same state afterwards even though an upgrade is actually separate remove/add ops. After a patch (for something I can't remember) it stopped working. It needs to be properly implemented or rolled back. ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 8 14:24:48 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:24:48 +0100 Subject: [cas_initsmf 0005121]: Install package problem In-Reply-To: Message-ID: <73973d20deafb100acc03782b57a6284@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5121 ====================================================================== Reported By: pcfung Assigned To: bonivart ====================================================================== Project: cas_initsmf Issue ID: 5121 Category: regular use Reproducibility: unable to reproduce Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-08 14:00 CET Last Modified: 2013-11-08 14:24 CET ====================================================================== Summary: Install package problem Description: Hi, i am using solaris 10 x86 and installing the apache2 on my zone with some error massage shown:(Debug Mode=ON) # /opt/csw/bin/pkgutil -i -y apache2 Solving needed dependencies ... Solving dependency order ... 30 CURRENT packages: CSWalternatives-1.1.1,REV=2011.05.31 CSWapache2-utils-2.2.22,REV=2012.06.01 CSWapache2c-2.2.22,REV=2012.06.01 CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWcas-initsmf-1.49,REV=2013.03.13 CSWcas-postmsg-1.42,REV=2010.11.26 CSWcas-preserveconf-1.49,REV=2013.03.13 CSWcommon-1.5,REV=2010.12.11 CSWiconv-1.14,REV=2011.08.08 CSWisaexec-0.2,REV=2009.03.26 CSWlibapr-dev-1.4.6,REV=2012.03.03 CSWlibapr1-0-1.4.6,REV=2012.03.03 CSWlibaprutil-dev-1.3.12,REV=2011.07.26 CSWlibaprutil1-0-1.3.12,REV=2011.07.26 CSWlibaprutil1-dbm-db-1.3.12,REV=2011.07.26 CSWlibaprutil1-ldap-1.3.12,REV=2011.07.26 CSWlibcharset1-1.14,REV=2011.08.07 CSWlibexpat1-2.1.0,REV=2013.01.01 CSWlibgdbm4-1.9,REV=2011.10.24 CSWlibiconv2-1.14,REV=2011.08.07 CSWliblber2-4-2-2.4.32,REV=2012.11.05 CSWlibldap-r2-4-2-2.4.32,REV=2012.11.05 CSWlibldap2-4-2-2.4.32,REV=2012.11.05 CSWlibsasl2-2-2.1.25,REV=2012.05.06 CSWlibssl1-0-0-1.0.1e,REV=2013.03.30 CSWlibz1-1.2.7,REV=2012.06.14 CSWoldaprt-2.4.32,REV=2012.11.10 CSWopenssl-utils-1.0.1e,REV=2013.03.30 CSWosslutils-0.9.8x,REV=2012.05.12 CSWperl-5.10.1,REV=2012.07.24 Install 1 NEW packages: CSWapache2-2.2.22,REV=2012.06.01 (opencsw/testing) Total size: 854.7 KB => Fetching CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... => Installing CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... Please see /opt/csw/share/doc/apache2/license for license information. Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... PACKAGE: CSWapache2 SMF: yes Installing class ... SRC: /var/tmp/ztempBAA9ya4Xn/CSWapache2/root/etc/opt/csw/init.d/cswapache2 DEST: /etc/opt/csw/init.d/cswapache2 Creating /var/opt/csw/svc/manifest/network ... FMRI: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create //var/opt/csw/svc/method/svc-cswapache2: No such file or directory chmod: WARNING: can't access //var/opt/csw/svc/method/svc-cswapache2 chown: //var/opt/csw/svc/method/svc-cswapache2: No such file or directory Creating manifest ... egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 MANIFEST: /var/opt/csw/svc/manifest/network/cswapache2.xml Configuring service in SMF ... CSWapache2 is using Service Management Facility. The FMRI is svc:/network/cswapache2:default Clearing svc:/network/cswapache2 in case it's in the maintenance state... Enabling svc:/network/cswapache2 ... ERROR: attribute verification of failed pathname does not exist unable to create symbolic link to Installing class ... Hello CSW User/Sysadmin, Please note that recent changes may affect the way you're used to working with the CSW apache2 packages. In the past, CSWap2prefork and CSWap2worker delivered a specific mpm module for use with apache2. We now ship the prefork mpm as part of CSWapache2 while the worker mpm remains in CSWap2worker. Each httpd mpm is installed using the new alternatives framework. When CSWap2worker is installed, it registers a higher priority httpd, thus it is activated as httpd (manual restart required). You can change this at any time using the alternatives command. See /opt/csw/sbin/alternatives --help for information on how you can do this. Thanks -The OpenCSW apache2 team. Checking configuration files: Copying CSW templates: preserving //opt/csw/apache2/share/htdocs/index.html preserving //opt/csw/apache2/etc/extra/httpd-autoindex.conf preserving //opt/csw/apache2/etc/extra/httpd-dav.conf preserving //opt/csw/apache2/etc/extra/httpd-default.conf preserving //opt/csw/apache2/etc/extra/httpd-info.conf preserving //opt/csw/apache2/etc/extra/httpd-languages.conf preserving //opt/csw/apache2/etc/extra/httpd-multilang-errordoc.conf preserving //opt/csw/apache2/etc/extra/httpd-userdir.conf preserving //opt/csw/apache2/etc/extra/httpd-vhosts.conf preserving //opt/csw/apache2/etc/magic preserving //opt/csw/apache2/etc/mime.types preserving //opt/csw/apache2/etc/envvars preserving //opt/csw/apache2/etc/envvars-std Installation of was successful. ====================================================================== ---------------------------------------------------------------------- (0010628) pcfung (reporter) - 2013-11-08 14:12 https://www.opencsw.org/mantis/view.php?id=5121#c10628 ---------------------------------------------------------------------- Hi, Please note!! i manually create a folder 'method' on /var/opt/csw/svc/ and install again. all problems were fixed. 'svcs' & 'svcadm' can run correctly now. From bug-notifications at lists.opencsw.org Fri Nov 8 14:27:43 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:27:43 +0100 Subject: [cas_initsmf 0005121]: Install package problem In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5121 ====================================================================== Reported By: pcfung Assigned To: bonivart ====================================================================== Project: cas_initsmf Issue ID: 5121 Category: regular use Reproducibility: unable to reproduce Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-08 14:00 CET Last Modified: 2013-11-08 14:27 CET ====================================================================== Summary: Install package problem Description: Hi, i am using solaris 10 x86 and installing the apache2 on my zone with some error massage shown:(Debug Mode=ON) # /opt/csw/bin/pkgutil -i -y apache2 Solving needed dependencies ... Solving dependency order ... 30 CURRENT packages: CSWalternatives-1.1.1,REV=2011.05.31 CSWapache2-utils-2.2.22,REV=2012.06.01 CSWapache2c-2.2.22,REV=2012.06.01 CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWcas-initsmf-1.49,REV=2013.03.13 CSWcas-postmsg-1.42,REV=2010.11.26 CSWcas-preserveconf-1.49,REV=2013.03.13 CSWcommon-1.5,REV=2010.12.11 CSWiconv-1.14,REV=2011.08.08 CSWisaexec-0.2,REV=2009.03.26 CSWlibapr-dev-1.4.6,REV=2012.03.03 CSWlibapr1-0-1.4.6,REV=2012.03.03 CSWlibaprutil-dev-1.3.12,REV=2011.07.26 CSWlibaprutil1-0-1.3.12,REV=2011.07.26 CSWlibaprutil1-dbm-db-1.3.12,REV=2011.07.26 CSWlibaprutil1-ldap-1.3.12,REV=2011.07.26 CSWlibcharset1-1.14,REV=2011.08.07 CSWlibexpat1-2.1.0,REV=2013.01.01 CSWlibgdbm4-1.9,REV=2011.10.24 CSWlibiconv2-1.14,REV=2011.08.07 CSWliblber2-4-2-2.4.32,REV=2012.11.05 CSWlibldap-r2-4-2-2.4.32,REV=2012.11.05 CSWlibldap2-4-2-2.4.32,REV=2012.11.05 CSWlibsasl2-2-2.1.25,REV=2012.05.06 CSWlibssl1-0-0-1.0.1e,REV=2013.03.30 CSWlibz1-1.2.7,REV=2012.06.14 CSWoldaprt-2.4.32,REV=2012.11.10 CSWopenssl-utils-1.0.1e,REV=2013.03.30 CSWosslutils-0.9.8x,REV=2012.05.12 CSWperl-5.10.1,REV=2012.07.24 Install 1 NEW packages: CSWapache2-2.2.22,REV=2012.06.01 (opencsw/testing) Total size: 854.7 KB => Fetching CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... => Installing CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... Please see /opt/csw/share/doc/apache2/license for license information. Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... PACKAGE: CSWapache2 SMF: yes Installing class ... SRC: /var/tmp/ztempBAA9ya4Xn/CSWapache2/root/etc/opt/csw/init.d/cswapache2 DEST: /etc/opt/csw/init.d/cswapache2 Creating /var/opt/csw/svc/manifest/network ... FMRI: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create //var/opt/csw/svc/method/svc-cswapache2: No such file or directory chmod: WARNING: can't access //var/opt/csw/svc/method/svc-cswapache2 chown: //var/opt/csw/svc/method/svc-cswapache2: No such file or directory Creating manifest ... egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 MANIFEST: /var/opt/csw/svc/manifest/network/cswapache2.xml Configuring service in SMF ... CSWapache2 is using Service Management Facility. The FMRI is svc:/network/cswapache2:default Clearing svc:/network/cswapache2 in case it's in the maintenance state... Enabling svc:/network/cswapache2 ... ERROR: attribute verification of failed pathname does not exist unable to create symbolic link to Installing class ... Hello CSW User/Sysadmin, Please note that recent changes may affect the way you're used to working with the CSW apache2 packages. In the past, CSWap2prefork and CSWap2worker delivered a specific mpm module for use with apache2. We now ship the prefork mpm as part of CSWapache2 while the worker mpm remains in CSWap2worker. Each httpd mpm is installed using the new alternatives framework. When CSWap2worker is installed, it registers a higher priority httpd, thus it is activated as httpd (manual restart required). You can change this at any time using the alternatives command. See /opt/csw/sbin/alternatives --help for information on how you can do this. Thanks -The OpenCSW apache2 team. Checking configuration files: Copying CSW templates: preserving //opt/csw/apache2/share/htdocs/index.html preserving //opt/csw/apache2/etc/extra/httpd-autoindex.conf preserving //opt/csw/apache2/etc/extra/httpd-dav.conf preserving //opt/csw/apache2/etc/extra/httpd-default.conf preserving //opt/csw/apache2/etc/extra/httpd-info.conf preserving //opt/csw/apache2/etc/extra/httpd-languages.conf preserving //opt/csw/apache2/etc/extra/httpd-multilang-errordoc.conf preserving //opt/csw/apache2/etc/extra/httpd-userdir.conf preserving //opt/csw/apache2/etc/extra/httpd-vhosts.conf preserving //opt/csw/apache2/etc/magic preserving //opt/csw/apache2/etc/mime.types preserving //opt/csw/apache2/etc/envvars preserving //opt/csw/apache2/etc/envvars-std Installation of was successful. ====================================================================== ---------------------------------------------------------------------- (0010629) bonivart (manager) - 2013-11-08 14:27 https://www.opencsw.org/mantis/view.php?id=5121#c10629 ---------------------------------------------------------------------- I think this is related to you running in a zone. CSWcas-initsmf should have created /var/opt/csw/svc/method for you. You say you did install that package (and the other class utils) from the global zone which is the correct way of doing it since they install files in /usr. Can you verify that those installs really did go well? Maybe redo them? From bug-notifications at lists.opencsw.org Fri Nov 8 14:50:15 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:50:15 +0100 Subject: [gcc4core 0005116]: Link /opt/csw/lib/gcc/i386-pc-solaris2.10/4.8.1/include-fixed/X11 points to nowhere In-Reply-To: <7b23dfeba1176364fd0b2fa6e113f66a> Message-ID: <212503f9e1f8e97921e5068a52b43b9e@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5116 ====================================================================== Reported By: dam Assigned To: dam ====================================================================== Project: gcc4core Issue ID: 5116 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2013-10-14 17:23 CEST Last Modified: 2013-11-08 14:50 CET ====================================================================== Summary: Link /opt/csw/lib/gcc/i386-pc-solaris2.10/4.8.1/include-fixed/X11 points to nowhere Description: The link /opt/csw/lib/gcc/i386-pc-solaris2.10/4.8.1/include-fixed/X11 points to root/usr/openwin/include/X11 which does not exist. The issue only appears in i386. It does also appear in the latest 4.8.0, but not the 4.8.0 version before that. ====================================================================== ---------------------------------------------------------------------- (0010630) dam (administrator) - 2013-11-08 14:50 https://www.opencsw.org/mantis/view.php?id=5116#c10630 ---------------------------------------------------------------------- I just verified that the issue has been fixed upstream in 4.8.2. The compiler is available for verification at http://buildfarm.opencsw.org/experimental.html#gcc-4.8.2 It will be pushed to unstable after some time. From bug-notifications at lists.opencsw.org Fri Nov 8 14:52:03 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:52:03 +0100 Subject: [libgtksourceview2_0_0 0003199]: Depend on CSWggettextrt In-Reply-To: Message-ID: <1825a5592e22ac4c0a3ded2fdf77a9fb@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3199 ====================================================================== Reported By: harpchad Assigned To: dam ====================================================================== Project: libgtksourceview2_0_0 Issue ID: 3199 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-14 03:02 CET Last Modified: 2013-11-08 14:52 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 8 14:52:48 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:52:48 +0100 Subject: [libgtksourceview2_0_0 0003199]: Depend on CSWggettextrt In-Reply-To: Message-ID: <8ed2a6e0499de9d017979028e60627dd@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3199 ====================================================================== Reported By: harpchad Assigned To: dam ====================================================================== Project: libgtksourceview2_0_0 Issue ID: 3199 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:02 CET Last Modified: 2013-11-08 14:52 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0010631) dam (administrator) - 2013-11-08 14:52 https://www.opencsw.org/mantis/view.php?id=3199#c10631 ---------------------------------------------------------------------- This is fixed in 2.11.2,REV=2013.11.04 and pushed to unstable/. From bug-notifications at lists.opencsw.org Fri Nov 8 14:54:00 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:54:00 +0100 Subject: [libwpd_utils 0003370]: Depend on CSWggettextrt In-Reply-To: <31ce825c1613cb96a138d29950662580> Message-ID: <4491d1cc9fa3ac18f98994ecfb1be9ae@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3370 ====================================================================== Reported By: harpchad Assigned To: dam ====================================================================== Project: libwpd_utils Issue ID: 3370 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-14 03:20 CET Last Modified: 2013-11-08 14:54 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 8 14:54:39 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:54:39 +0100 Subject: [libwpd_utils 0003370]: Depend on CSWggettextrt In-Reply-To: <31ce825c1613cb96a138d29950662580> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3370 ====================================================================== Reported By: harpchad Assigned To: dam ====================================================================== Project: libwpd_utils Issue ID: 3370 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:20 CET Last Modified: 2013-11-08 14:54 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0010632) dam (administrator) - 2013-11-08 14:54 https://www.opencsw.org/mantis/view.php?id=3370#c10632 ---------------------------------------------------------------------- This is fixed in 0.9.9,REV=2013.11.07 and pushed to unstable/. From bug-notifications at lists.opencsw.org Fri Nov 8 14:56:10 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 14:56:10 +0100 Subject: [fltk 0001982]: local paths in config files In-Reply-To: <7d3f426d8d9e98ddf19edcc157360e73> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1982 ====================================================================== Reported By: james Assigned To: jgoerzen ====================================================================== Project: fltk Issue ID: 1982 Category: other Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2006-12-03 09:40 CET Last Modified: 2013-11-08 14:56 CET ====================================================================== Summary: local paths in config files Description: CSWfltk 1.1.7,REV=2006.06.26 export/home found in file ./opt/csw/bin/fltk-config ====================================================================== ---------------------------------------------------------------------- (0005899) jgoerzen (developer) - 2009-04-05 19:09 https://www.opencsw.org/mantis/view.php?id=1982#c5899 ---------------------------------------------------------------------- updated fltk pkgs built with mGAR v2 build system and placed in /testing. No local paths should exist now. From bug-notifications at lists.opencsw.org Fri Nov 8 15:14:38 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 15:14:38 +0100 Subject: [cas_initsmf 0005121]: Install package problem In-Reply-To: Message-ID: <83ae0d98e459b6c58f37bd22cbc3e654@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5121 ====================================================================== Reported By: pcfung Assigned To: bonivart ====================================================================== Project: cas_initsmf Issue ID: 5121 Category: regular use Reproducibility: unable to reproduce Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-08 14:00 CET Last Modified: 2013-11-08 15:14 CET ====================================================================== Summary: Install package problem Description: Hi, i am using solaris 10 x86 and installing the apache2 on my zone with some error massage shown:(Debug Mode=ON) # /opt/csw/bin/pkgutil -i -y apache2 Solving needed dependencies ... Solving dependency order ... 30 CURRENT packages: CSWalternatives-1.1.1,REV=2011.05.31 CSWapache2-utils-2.2.22,REV=2012.06.01 CSWapache2c-2.2.22,REV=2012.06.01 CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWcas-initsmf-1.49,REV=2013.03.13 CSWcas-postmsg-1.42,REV=2010.11.26 CSWcas-preserveconf-1.49,REV=2013.03.13 CSWcommon-1.5,REV=2010.12.11 CSWiconv-1.14,REV=2011.08.08 CSWisaexec-0.2,REV=2009.03.26 CSWlibapr-dev-1.4.6,REV=2012.03.03 CSWlibapr1-0-1.4.6,REV=2012.03.03 CSWlibaprutil-dev-1.3.12,REV=2011.07.26 CSWlibaprutil1-0-1.3.12,REV=2011.07.26 CSWlibaprutil1-dbm-db-1.3.12,REV=2011.07.26 CSWlibaprutil1-ldap-1.3.12,REV=2011.07.26 CSWlibcharset1-1.14,REV=2011.08.07 CSWlibexpat1-2.1.0,REV=2013.01.01 CSWlibgdbm4-1.9,REV=2011.10.24 CSWlibiconv2-1.14,REV=2011.08.07 CSWliblber2-4-2-2.4.32,REV=2012.11.05 CSWlibldap-r2-4-2-2.4.32,REV=2012.11.05 CSWlibldap2-4-2-2.4.32,REV=2012.11.05 CSWlibsasl2-2-2.1.25,REV=2012.05.06 CSWlibssl1-0-0-1.0.1e,REV=2013.03.30 CSWlibz1-1.2.7,REV=2012.06.14 CSWoldaprt-2.4.32,REV=2012.11.10 CSWopenssl-utils-1.0.1e,REV=2013.03.30 CSWosslutils-0.9.8x,REV=2012.05.12 CSWperl-5.10.1,REV=2012.07.24 Install 1 NEW packages: CSWapache2-2.2.22,REV=2012.06.01 (opencsw/testing) Total size: 854.7 KB => Fetching CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... => Installing CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... Please see /opt/csw/share/doc/apache2/license for license information. Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... PACKAGE: CSWapache2 SMF: yes Installing class ... SRC: /var/tmp/ztempBAA9ya4Xn/CSWapache2/root/etc/opt/csw/init.d/cswapache2 DEST: /etc/opt/csw/init.d/cswapache2 Creating /var/opt/csw/svc/manifest/network ... FMRI: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create //var/opt/csw/svc/method/svc-cswapache2: No such file or directory chmod: WARNING: can't access //var/opt/csw/svc/method/svc-cswapache2 chown: //var/opt/csw/svc/method/svc-cswapache2: No such file or directory Creating manifest ... egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 MANIFEST: /var/opt/csw/svc/manifest/network/cswapache2.xml Configuring service in SMF ... CSWapache2 is using Service Management Facility. The FMRI is svc:/network/cswapache2:default Clearing svc:/network/cswapache2 in case it's in the maintenance state... Enabling svc:/network/cswapache2 ... ERROR: attribute verification of failed pathname does not exist unable to create symbolic link to Installing class ... Hello CSW User/Sysadmin, Please note that recent changes may affect the way you're used to working with the CSW apache2 packages. In the past, CSWap2prefork and CSWap2worker delivered a specific mpm module for use with apache2. We now ship the prefork mpm as part of CSWapache2 while the worker mpm remains in CSWap2worker. Each httpd mpm is installed using the new alternatives framework. When CSWap2worker is installed, it registers a higher priority httpd, thus it is activated as httpd (manual restart required). You can change this at any time using the alternatives command. See /opt/csw/sbin/alternatives --help for information on how you can do this. Thanks -The OpenCSW apache2 team. Checking configuration files: Copying CSW templates: preserving //opt/csw/apache2/share/htdocs/index.html preserving //opt/csw/apache2/etc/extra/httpd-autoindex.conf preserving //opt/csw/apache2/etc/extra/httpd-dav.conf preserving //opt/csw/apache2/etc/extra/httpd-default.conf preserving //opt/csw/apache2/etc/extra/httpd-info.conf preserving //opt/csw/apache2/etc/extra/httpd-languages.conf preserving //opt/csw/apache2/etc/extra/httpd-multilang-errordoc.conf preserving //opt/csw/apache2/etc/extra/httpd-userdir.conf preserving //opt/csw/apache2/etc/extra/httpd-vhosts.conf preserving //opt/csw/apache2/etc/magic preserving //opt/csw/apache2/etc/mime.types preserving //opt/csw/apache2/etc/envvars preserving //opt/csw/apache2/etc/envvars-std Installation of was successful. ====================================================================== ---------------------------------------------------------------------- (0010633) pcfung (reporter) - 2013-11-08 15:14 https://www.opencsw.org/mantis/view.php?id=5121#c10633 ---------------------------------------------------------------------- If everything install to global, no any error. But i want to keep my global clean & small. i just install a package on global when a error occur on zone. =>installation_on_zone (/opt/csw/bin/pkgutil -i -y XXXXXX) =>error =>remove_error_package =>install_error_package_to_global =>success =>redo_installation_on_zone do stupid thing again & again :D The zone is running Apache2+php5+mysql5 now From bug-notifications at lists.opencsw.org Fri Nov 8 15:55:42 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 8 Nov 2013 15:55:42 +0100 Subject: [cas_initsmf 0005121]: Install package problem In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5121 ====================================================================== Reported By: pcfung Assigned To: bonivart ====================================================================== Project: cas_initsmf Issue ID: 5121 Category: regular use Reproducibility: unable to reproduce Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-08 14:00 CET Last Modified: 2013-11-08 15:55 CET ====================================================================== Summary: Install package problem Description: Hi, i am using solaris 10 x86 and installing the apache2 on my zone with some error massage shown:(Debug Mode=ON) # /opt/csw/bin/pkgutil -i -y apache2 Solving needed dependencies ... Solving dependency order ... 30 CURRENT packages: CSWalternatives-1.1.1,REV=2011.05.31 CSWapache2-utils-2.2.22,REV=2012.06.01 CSWapache2c-2.2.22,REV=2012.06.01 CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWcas-initsmf-1.49,REV=2013.03.13 CSWcas-postmsg-1.42,REV=2010.11.26 CSWcas-preserveconf-1.49,REV=2013.03.13 CSWcommon-1.5,REV=2010.12.11 CSWiconv-1.14,REV=2011.08.08 CSWisaexec-0.2,REV=2009.03.26 CSWlibapr-dev-1.4.6,REV=2012.03.03 CSWlibapr1-0-1.4.6,REV=2012.03.03 CSWlibaprutil-dev-1.3.12,REV=2011.07.26 CSWlibaprutil1-0-1.3.12,REV=2011.07.26 CSWlibaprutil1-dbm-db-1.3.12,REV=2011.07.26 CSWlibaprutil1-ldap-1.3.12,REV=2011.07.26 CSWlibcharset1-1.14,REV=2011.08.07 CSWlibexpat1-2.1.0,REV=2013.01.01 CSWlibgdbm4-1.9,REV=2011.10.24 CSWlibiconv2-1.14,REV=2011.08.07 CSWliblber2-4-2-2.4.32,REV=2012.11.05 CSWlibldap-r2-4-2-2.4.32,REV=2012.11.05 CSWlibldap2-4-2-2.4.32,REV=2012.11.05 CSWlibsasl2-2-2.1.25,REV=2012.05.06 CSWlibssl1-0-0-1.0.1e,REV=2013.03.30 CSWlibz1-1.2.7,REV=2012.06.14 CSWoldaprt-2.4.32,REV=2012.11.10 CSWopenssl-utils-1.0.1e,REV=2013.03.30 CSWosslutils-0.9.8x,REV=2012.05.12 CSWperl-5.10.1,REV=2012.07.24 Install 1 NEW packages: CSWapache2-2.2.22,REV=2012.06.01 (opencsw/testing) Total size: 854.7 KB => Fetching CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... => Installing CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... Please see /opt/csw/share/doc/apache2/license for license information. Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... PACKAGE: CSWapache2 SMF: yes Installing class ... SRC: /var/tmp/ztempBAA9ya4Xn/CSWapache2/root/etc/opt/csw/init.d/cswapache2 DEST: /etc/opt/csw/init.d/cswapache2 Creating /var/opt/csw/svc/manifest/network ... FMRI: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create //var/opt/csw/svc/method/svc-cswapache2: No such file or directory chmod: WARNING: can't access //var/opt/csw/svc/method/svc-cswapache2 chown: //var/opt/csw/svc/method/svc-cswapache2: No such file or directory Creating manifest ... egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 MANIFEST: /var/opt/csw/svc/manifest/network/cswapache2.xml Configuring service in SMF ... CSWapache2 is using Service Management Facility. The FMRI is svc:/network/cswapache2:default Clearing svc:/network/cswapache2 in case it's in the maintenance state... Enabling svc:/network/cswapache2 ... ERROR: attribute verification of failed pathname does not exist unable to create symbolic link to Installing class ... Hello CSW User/Sysadmin, Please note that recent changes may affect the way you're used to working with the CSW apache2 packages. In the past, CSWap2prefork and CSWap2worker delivered a specific mpm module for use with apache2. We now ship the prefork mpm as part of CSWapache2 while the worker mpm remains in CSWap2worker. Each httpd mpm is installed using the new alternatives framework. When CSWap2worker is installed, it registers a higher priority httpd, thus it is activated as httpd (manual restart required). You can change this at any time using the alternatives command. See /opt/csw/sbin/alternatives --help for information on how you can do this. Thanks -The OpenCSW apache2 team. Checking configuration files: Copying CSW templates: preserving //opt/csw/apache2/share/htdocs/index.html preserving //opt/csw/apache2/etc/extra/httpd-autoindex.conf preserving //opt/csw/apache2/etc/extra/httpd-dav.conf preserving //opt/csw/apache2/etc/extra/httpd-default.conf preserving //opt/csw/apache2/etc/extra/httpd-info.conf preserving //opt/csw/apache2/etc/extra/httpd-languages.conf preserving //opt/csw/apache2/etc/extra/httpd-multilang-errordoc.conf preserving //opt/csw/apache2/etc/extra/httpd-userdir.conf preserving //opt/csw/apache2/etc/extra/httpd-vhosts.conf preserving //opt/csw/apache2/etc/magic preserving //opt/csw/apache2/etc/mime.types preserving //opt/csw/apache2/etc/envvars preserving //opt/csw/apache2/etc/envvars-std Installation of was successful. ====================================================================== ---------------------------------------------------------------------- (0010634) bonivart (manager) - 2013-11-08 15:55 https://www.opencsw.org/mantis/view.php?id=5121#c10634 ---------------------------------------------------------------------- It should be ok if you only install the class util packages (e.g. CSWcas-initsmf) in the global zone because those are our only packages delivering files to /usr which is read-only in non-global zones. If you then install, e.g., CSWapache2 in a non-global zone and it depends on a class util package the dependency should already be fulfilled. So your global zone should only contain a few packages, probably no more than a few MB. From bug-notifications at lists.opencsw.org Sat Nov 9 06:25:56 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sat, 9 Nov 2013 06:25:56 +0100 Subject: [cas_initsmf 0005121]: Install package problem In-Reply-To: Message-ID: <9d738b0beced27f9d4d6ce7ea241bd6e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5121 ====================================================================== Reported By: pcfung Assigned To: bonivart ====================================================================== Project: cas_initsmf Issue ID: 5121 Category: regular use Reproducibility: unable to reproduce Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-08 14:00 CET Last Modified: 2013-11-09 06:25 CET ====================================================================== Summary: Install package problem Description: Hi, i am using solaris 10 x86 and installing the apache2 on my zone with some error massage shown:(Debug Mode=ON) # /opt/csw/bin/pkgutil -i -y apache2 Solving needed dependencies ... Solving dependency order ... 30 CURRENT packages: CSWalternatives-1.1.1,REV=2011.05.31 CSWapache2-utils-2.2.22,REV=2012.06.01 CSWapache2c-2.2.22,REV=2012.06.01 CSWbdb48-4.8.30,REV=2010.12.06_rev=p0 CSWcas-initsmf-1.49,REV=2013.03.13 CSWcas-postmsg-1.42,REV=2010.11.26 CSWcas-preserveconf-1.49,REV=2013.03.13 CSWcommon-1.5,REV=2010.12.11 CSWiconv-1.14,REV=2011.08.08 CSWisaexec-0.2,REV=2009.03.26 CSWlibapr-dev-1.4.6,REV=2012.03.03 CSWlibapr1-0-1.4.6,REV=2012.03.03 CSWlibaprutil-dev-1.3.12,REV=2011.07.26 CSWlibaprutil1-0-1.3.12,REV=2011.07.26 CSWlibaprutil1-dbm-db-1.3.12,REV=2011.07.26 CSWlibaprutil1-ldap-1.3.12,REV=2011.07.26 CSWlibcharset1-1.14,REV=2011.08.07 CSWlibexpat1-2.1.0,REV=2013.01.01 CSWlibgdbm4-1.9,REV=2011.10.24 CSWlibiconv2-1.14,REV=2011.08.07 CSWliblber2-4-2-2.4.32,REV=2012.11.05 CSWlibldap-r2-4-2-2.4.32,REV=2012.11.05 CSWlibldap2-4-2-2.4.32,REV=2012.11.05 CSWlibsasl2-2-2.1.25,REV=2012.05.06 CSWlibssl1-0-0-1.0.1e,REV=2013.03.30 CSWlibz1-1.2.7,REV=2012.06.14 CSWoldaprt-2.4.32,REV=2012.11.10 CSWopenssl-utils-1.0.1e,REV=2013.03.30 CSWosslutils-0.9.8x,REV=2012.05.12 CSWperl-5.10.1,REV=2012.07.24 Install 1 NEW packages: CSWapache2-2.2.22,REV=2012.06.01 (opencsw/testing) Total size: 854.7 KB => Fetching CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... => Installing CSWapache2-2.2.22,REV=2012.06.01 (1/1) ... Please see /opt/csw/share/doc/apache2/license for license information. Registering 'httpd' alternative /opt/csw/apache2/sbin/httpd.prefork ... PACKAGE: CSWapache2 SMF: yes Installing class ... SRC: /var/tmp/ztempBAA9ya4Xn/CSWapache2/root/etc/opt/csw/init.d/cswapache2 DEST: /etc/opt/csw/init.d/cswapache2 Creating /var/opt/csw/svc/manifest/network ... FMRI: network Creating service script in /var/opt/csw/svc/method/svc-cswapache2 ... ln: cannot create //var/opt/csw/svc/method/svc-cswapache2: No such file or directory chmod: WARNING: can't access //var/opt/csw/svc/method/svc-cswapache2 chown: //var/opt/csw/svc/method/svc-cswapache2: No such file or directory Creating manifest ... egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 egrep: can't open //var/opt/csw/svc/method/svc-cswapache2 MANIFEST: /var/opt/csw/svc/manifest/network/cswapache2.xml Configuring service in SMF ... CSWapache2 is using Service Management Facility. The FMRI is svc:/network/cswapache2:default Clearing svc:/network/cswapache2 in case it's in the maintenance state... Enabling svc:/network/cswapache2 ... ERROR: attribute verification of failed pathname does not exist unable to create symbolic link to Installing class ... Hello CSW User/Sysadmin, Please note that recent changes may affect the way you're used to working with the CSW apache2 packages. In the past, CSWap2prefork and CSWap2worker delivered a specific mpm module for use with apache2. We now ship the prefork mpm as part of CSWapache2 while the worker mpm remains in CSWap2worker. Each httpd mpm is installed using the new alternatives framework. When CSWap2worker is installed, it registers a higher priority httpd, thus it is activated as httpd (manual restart required). You can change this at any time using the alternatives command. See /opt/csw/sbin/alternatives --help for information on how you can do this. Thanks -The OpenCSW apache2 team. Checking configuration files: Copying CSW templates: preserving //opt/csw/apache2/share/htdocs/index.html preserving //opt/csw/apache2/etc/extra/httpd-autoindex.conf preserving //opt/csw/apache2/etc/extra/httpd-dav.conf preserving //opt/csw/apache2/etc/extra/httpd-default.conf preserving //opt/csw/apache2/etc/extra/httpd-info.conf preserving //opt/csw/apache2/etc/extra/httpd-languages.conf preserving //opt/csw/apache2/etc/extra/httpd-multilang-errordoc.conf preserving //opt/csw/apache2/etc/extra/httpd-userdir.conf preserving //opt/csw/apache2/etc/extra/httpd-vhosts.conf preserving //opt/csw/apache2/etc/magic preserving //opt/csw/apache2/etc/mime.types preserving //opt/csw/apache2/etc/envvars preserving //opt/csw/apache2/etc/envvars-std Installation of was successful. ====================================================================== ---------------------------------------------------------------------- (0010635) pcfung (reporter) - 2013-11-09 06:25 https://www.opencsw.org/mantis/view.php?id=5121#c10635 ---------------------------------------------------------------------- Thanks for your support. From bug-notifications at lists.opencsw.org Sat Nov 9 19:00:40 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sat, 9 Nov 2013 19:00:40 +0100 Subject: [pkgutil 0005102]: Remove hardcoded paths to SVR4 package tools In-Reply-To: <3ce776570a8cf52933b407523bfa0def> Message-ID: <4505f04bacac3e5bfdceae788266266e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5102 ====================================================================== Reported By: yann Assigned To: bonivart ====================================================================== Project: pkgutil Issue ID: 5102 Category: regular use Reproducibility: always Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-08-16 17:13 CEST Last Modified: 2013-11-09 19:00 CET ====================================================================== Summary: Remove hardcoded paths to SVR4 package tools Description: Hi Peter, Might be strange but I am trying to use pkgutil on a SmartOS server where pkgadd, pkgrm.. are not available. I can get them and put them in a different location but most path are to these tools are hardcoded in pkgutil so this doesn't work out of the box. So my feature request is: is this possible to modify pkgutil so path to SVR4 package tools are not hardcoded ? Thanks in advance for your answer, Yann ====================================================================== ---------------------------------------------------------------------- (0010636) yann (developer) - 2013-11-09 19:00 https://www.opencsw.org/mantis/view.php?id=5102#c10636 ---------------------------------------------------------------------- Hi Peter, Still no problem with this version, do you think you will release it shortly ? Yann From bug-notifications at lists.opencsw.org Sun Nov 10 11:22:11 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sun, 10 Nov 2013 11:22:11 +0100 Subject: [qt4_gxx_dev 0005122]: Missing development files to build custom widget plugins (libQtUiTools.a) Message-ID: <15408672d71658b74b45a7ede142a16e@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5122 ====================================================================== Reported By: Andreas Baumann Assigned To: ====================================================================== Project: qt4_gxx_dev Issue ID: 5122 Category: Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-10 11:22 CET Last Modified: 2013-11-10 11:22 CET ====================================================================== Summary: Missing development files to build custom widget plugins (libQtUiTools.a) Description: When linking a custom widget I get a missing -lQtUiTools error. I think '/opt/csw/gxx/lib/libQtUiTools.a' is missing. In archlinux the problem was that static libraries were not built and libQtUiTools.a exists only as static developemnt library. ====================================================================== From bug-notifications at lists.opencsw.org Tue Nov 12 19:52:36 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 12 Nov 2013 19:52:36 +0100 Subject: [qt4_gxx_dev 0005122]: Missing development files to build custom widget plugins (libQtUiTools.a) In-Reply-To: <3bb565204aa2ac16794646288254a6ef> Message-ID: <418c1b6ead275f8fad26523db603669f@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5122 ====================================================================== Reported By: Andreas Baumann Assigned To: cgrzemba ====================================================================== Project: qt4_gxx_dev Issue ID: 5122 Category: Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-10 11:22 CET Last Modified: 2013-11-12 19:52 CET ====================================================================== Summary: Missing development files to build custom widget plugins (libQtUiTools.a) Description: When linking a custom widget I get a missing -lQtUiTools error. I think '/opt/csw/gxx/lib/libQtUiTools.a' is missing. In archlinux the problem was that static libraries were not built and libQtUiTools.a exists only as static developemnt library. ====================================================================== From bug-notifications at lists.opencsw.org Tue Nov 12 19:54:50 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 12 Nov 2013 19:54:50 +0100 Subject: [qt4_gxx_dev 0005122]: Missing development files to build custom widget plugins (libQtUiTools.a) In-Reply-To: <3bb565204aa2ac16794646288254a6ef> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5122 ====================================================================== Reported By: Andreas Baumann Assigned To: cgrzemba ====================================================================== Project: qt4_gxx_dev Issue ID: 5122 Category: Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-10 11:22 CET Last Modified: 2013-11-12 19:54 CET ====================================================================== Summary: Missing development files to build custom widget plugins (libQtUiTools.a) Description: When linking a custom widget I get a missing -lQtUiTools error. I think '/opt/csw/gxx/lib/libQtUiTools.a' is missing. In archlinux the problem was that static libraries were not built and libQtUiTools.a exists only as static developemnt library. ====================================================================== ---------------------------------------------------------------------- (0010637) cgrzemba (manager) - 2013-11-12 19:54 https://www.opencsw.org/mantis/view.php?id=5122#c10637 ---------------------------------------------------------------------- Can you give some version information? Platform? Solaris? Package or Catalog? the path /opt/csw/gxx/lib/libQtUiTools.a seams to be an "old" package From bug-notifications at lists.opencsw.org Tue Nov 12 22:17:14 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 12 Nov 2013 22:17:14 +0100 Subject: [qt4_gxx_dev 0005122]: Missing development files to build custom widget plugins (libQtUiTools.a) In-Reply-To: <3bb565204aa2ac16794646288254a6ef> Message-ID: <1ba2edbfa649c85d2c8d788936e63a10@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5122 ====================================================================== Reported By: Andreas Baumann Assigned To: cgrzemba ====================================================================== Project: qt4_gxx_dev Issue ID: 5122 Category: Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-10 11:22 CET Last Modified: 2013-11-12 22:17 CET ====================================================================== Summary: Missing development files to build custom widget plugins (libQtUiTools.a) Description: When linking a custom widget I get a missing -lQtUiTools error. I think '/opt/csw/gxx/lib/libQtUiTools.a' is missing. In archlinux the problem was that static libraries were not built and libQtUiTools.a exists only as static developemnt library. ====================================================================== ---------------------------------------------------------------------- (0010638) Andreas Baumann (reporter) - 2013-11-12 22:17 https://www.opencsw.org/mantis/view.php?id=5122#c10638 ---------------------------------------------------------------------- A, my mistake. Too few information. :-) I'm using OpenIndiaia 151 a8. CSWqt4-gxx-dev qt4_gxx_dev (i386) 4.8.0,REV=2012.06.08 From bug-notifications at lists.opencsw.org Wed Nov 13 10:35:55 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 13 Nov 2013 10:35:55 +0100 Subject: [pkgutil 0005102]: Remove hardcoded paths to SVR4 package tools In-Reply-To: <3ce776570a8cf52933b407523bfa0def> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5102 ====================================================================== Reported By: yann Assigned To: bonivart ====================================================================== Project: pkgutil Issue ID: 5102 Category: regular use Reproducibility: always Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-08-16 17:13 CEST Last Modified: 2013-11-13 10:35 CET ====================================================================== Summary: Remove hardcoded paths to SVR4 package tools Description: Hi Peter, Might be strange but I am trying to use pkgutil on a SmartOS server where pkgadd, pkgrm.. are not available. I can get them and put them in a different location but most path are to these tools are hardcoded in pkgutil so this doesn't work out of the box. So my feature request is: is this possible to modify pkgutil so path to SVR4 package tools are not hardcoded ? Thanks in advance for your answer, Yann ====================================================================== ---------------------------------------------------------------------- (0010639) bonivart (manager) - 2013-11-13 10:35 https://www.opencsw.org/mantis/view.php?id=5102#c10639 ---------------------------------------------------------------------- I forgot all about it, sorry. It has now been released. From bug-notifications at lists.opencsw.org Thu Nov 14 19:09:56 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 14 Nov 2013 19:09:56 +0100 Subject: [amanda 0005123]: Permissions need to be set-uid owner or be set as from the package Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5123 ====================================================================== Reported By: upengan Assigned To: ====================================================================== Project: amanda Issue ID: 5123 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-14 19:09 CET Last Modified: 2013-11-14 19:09 CET ====================================================================== Summary: Permissions need to be set-uid owner or be set as from the package Description: CSWamanda https://www.opencsw.org/mantis/view.php?id=3.3.3 the permissions for amanda binaries in /opt/csw/sbin/ have permissions that do not work as it is. They have to be set-uid root or whatever appropriate. For example, -rwxr-xr-x 1 root bin 64132 Apr 24 2013 /opt/csw/sbin/amcheck Above perms, result in "permission denied' error while running amcheck. chmod u+s /opt/csw/sbin/amcheck will resolve the issue. ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 15 09:02:15 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 15 Nov 2013 09:02:15 +0100 Subject: [qt4_gxx_dev 0005122]: Missing development files to build custom widget plugins (libQtUiTools.a) In-Reply-To: <3bb565204aa2ac16794646288254a6ef> Message-ID: <4e131669ab6e2a1eca3a637fb4137b7c@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5122 ====================================================================== Reported By: Andreas Baumann Assigned To: cgrzemba ====================================================================== Project: qt4_gxx_dev Issue ID: 5122 Category: Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-10 11:22 CET Last Modified: 2013-11-15 09:02 CET ====================================================================== Summary: Missing development files to build custom widget plugins (libQtUiTools.a) Description: When linking a custom widget I get a missing -lQtUiTools error. I think '/opt/csw/gxx/lib/libQtUiTools.a' is missing. In archlinux the problem was that static libraries were not built and libQtUiTools.a exists only as static developemnt library. ====================================================================== ---------------------------------------------------------------------- (0010640) cgrzemba (manager) - 2013-11-15 09:02 https://www.opencsw.org/mantis/view.php?id=5122#c10640 ---------------------------------------------------------------------- normally openCSW packages never contain static libraries. But the libQtUiTools exist only as static library, so I guess we have to in this case. From bug-notifications at lists.opencsw.org Fri Nov 15 18:52:40 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 15 Nov 2013 18:52:40 +0100 Subject: [qt4_gxx_dev 0005122]: Missing development files to build custom widget plugins (libQtUiTools.a) In-Reply-To: <3bb565204aa2ac16794646288254a6ef> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5122 ====================================================================== Reported By: Andreas Baumann Assigned To: cgrzemba ====================================================================== Project: qt4_gxx_dev Issue ID: 5122 Category: Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-11-10 11:22 CET Last Modified: 2013-11-15 18:52 CET ====================================================================== Summary: Missing development files to build custom widget plugins (libQtUiTools.a) Description: When linking a custom widget I get a missing -lQtUiTools error. I think '/opt/csw/gxx/lib/libQtUiTools.a' is missing. In archlinux the problem was that static libraries were not built and libQtUiTools.a exists only as static developemnt library. ====================================================================== ---------------------------------------------------------------------- (0010641) pfelecan (developer) - 2013-11-15 18:52 https://www.opencsw.org/mantis/view.php?id=5122#c10641 ---------------------------------------------------------------------- Indeed, the QtUiTools.a is built but not included in any package. Neither is the private include probably required. I will deliver a new set of packages next week. Last but no least, should I provide all the static libraries in the development package? BTW, the OP should be aware that what he's using is quite old and the new delivery will be on the unstable catalog. Consequently an update will be required. From bug-notifications at lists.opencsw.org Sat Nov 16 15:59:55 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sat, 16 Nov 2013 15:59:55 +0100 Subject: [pkgutil 0005102]: Remove hardcoded paths to SVR4 package tools In-Reply-To: <3ce776570a8cf52933b407523bfa0def> Message-ID: <8aa04780a65b136e90a97b8dff940fe5@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5102 ====================================================================== Reported By: yann Assigned To: bonivart ====================================================================== Project: pkgutil Issue ID: 5102 Category: regular use Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2013-08-16 17:13 CEST Last Modified: 2013-11-16 15:59 CET ====================================================================== Summary: Remove hardcoded paths to SVR4 package tools Description: Hi Peter, Might be strange but I am trying to use pkgutil on a SmartOS server where pkgadd, pkgrm.. are not available. I can get them and put them in a different location but most path are to these tools are hardcoded in pkgutil so this doesn't work out of the box. So my feature request is: is this possible to modify pkgutil so path to SVR4 package tools are not hardcoded ? Thanks in advance for your answer, Yann ====================================================================== ---------------------------------------------------------------------- (0010639) bonivart (manager) - 2013-11-13 10:35 https://www.opencsw.org/mantis/view.php?id=5102#c10639 ---------------------------------------------------------------------- I forgot all about it, sorry. It has now been released. From bug-notifications at lists.opencsw.org Sun Nov 17 09:49:55 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sun, 17 Nov 2013 09:49:55 +0100 Subject: [libgtkspell0 0003138]: Depend on CSWggettextrt In-Reply-To: <10b2bee36d582b7d506e7d91d2e4b400> Message-ID: <37cbda7c0c7404e3d58c39e8f948b19b@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3138 ====================================================================== Reported By: harpchad Assigned To: ====================================================================== Project: libgtkspell0 Issue ID: 3138 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 02:55 CET Last Modified: 2013-11-17 09:49 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0010642) raos (manager) - 2013-11-17 09:49 https://www.opencsw.org/mantis/view.php?id=3138#c10642 ---------------------------------------------------------------------- done From bug-notifications at lists.opencsw.org Sun Nov 17 09:52:58 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sun, 17 Nov 2013 09:52:58 +0100 Subject: [fontconfig 0001519]: fc-cache running in non-global zone In-Reply-To: Message-ID: <80839f80d7639bf471f6f4ac4f396bc8@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1519 ====================================================================== Reported By: asmoore Assigned To: amaier ====================================================================== Project: fontconfig Issue ID: 1519 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2006-03-05 09:22 CET Last Modified: 2013-11-17 09:52 CET ====================================================================== Summary: fc-cache running in non-global zone Description: On Solaris 10 in a non-global zone; fc-cache produces error after error. ====================================================================== ---------------------------------------------------------------------- (0003224) asmoore (reporter) - 2006-03-05 10:04 https://www.opencsw.org/mantis/view.php?id=1519#c3224 ---------------------------------------------------------------------- Actually, your question is my question and the problem. One of the ways to setup a non-globabl zone, and this is probably the most typical, is to mount /usr from the global zone in the non-global zones with lofs. The mount is -ro in the non-global zone. I installed a package in a non-global zone and pkg-get installed fontconfig as a dependency. Therefore, I suspect that fc-cache was started from postinstall. After running at very heavy cpu utilization and spitting out error after error, I finally got the process to die. You can use /usr/bin/zonename, if it exists, to determine the zonename. I believe this is correct, but you may want to confirm, zonename returns \'global\' when run from the global zone. If the zonename binary exists and does not return \'global\', you may want to send a message that fc-cache was not run and, if needed, can be run with the init script. From bug-notifications at lists.opencsw.org Sun Nov 17 09:53:34 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Sun, 17 Nov 2013 09:53:34 +0100 Subject: [gtk2 0005029]: Bump GTK+ to 2.24.13 In-Reply-To: <21abebde057d30e2d62cfa3c70143666> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5029 ====================================================================== Reported By: kenmays Assigned To: raos ====================================================================== Project: gtk2 Issue ID: 5029 Category: upgrade Reproducibility: N/A Severity: feature Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-12-02 18:10 CET Last Modified: 2013-11-17 09:53 CET ====================================================================== Summary: Bump GTK+ to 2.24.13 Description: Bump GTK+ to 2.24.13 to improve bug fixes and support for desktop application development and testing: ftp://ftp.gnome.org/pub/gnome/sources/gtk+/2.24/gtk+-2.24.13.tar.xz ====================================================================== ---------------------------------------------------------------------- (0010246) raos (manager) - 2012-12-18 08:44 https://www.opencsw.org/mantis/view.php?id=5029#c10246 ---------------------------------------------------------------------- Stuck at pango AMD64 linking issue... From bug-notifications at lists.opencsw.org Wed Nov 20 13:22:26 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 20 Nov 2013 13:22:26 +0100 Subject: [pidgin 0005124]: cannot connect to yahoo and xmpp: SSL Handshake failed Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5124 ====================================================================== Reported By: ghenry Assigned To: ====================================================================== Project: pidgin Issue ID: 5124 Category: regular use Reproducibility: always Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-20 13:22 CET Last Modified: 2013-11-20 13:22 CET ====================================================================== Summary: cannot connect to yahoo and xmpp: SSL Handshake failed Description: I'm on Solaris 10, sparc. Pidgin is 2.10.7 (2.10.7,REV=2013.10.24) it worked in the past, and yahoo and xmpp works with Solaris 11 pidgin ====================================================================== From bug-notifications at lists.opencsw.org Wed Nov 20 13:26:13 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 20 Nov 2013 13:26:13 +0100 Subject: [pidgin 0005125]: pidgin crashes when selecting Tools -> Certificates Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5125 ====================================================================== Reported By: ghenry Assigned To: ====================================================================== Project: pidgin Issue ID: 5125 Category: regular use Reproducibility: always Severity: crash Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-20 13:26 CET Last Modified: 2013-11-20 13:26 CET ====================================================================== Summary: pidgin crashes when selecting Tools -> Certificates Description: mombasa-ghenry% /opt/csw/bin/pidgin Pidgin 2.10.7 has segfaulted and attempted to dump a core file. This is a bug in the software and has happened through no fault of your own. If you can reproduce the crash, please notify the developers by reporting a bug at: http://developer.pidgin.im/simpleticket/ Please make sure to specify what you were doing at the time and post the backtrace from the core file. If you do not know how to get the backtrace, please read the instructions at http://developer.pidgin.im/wiki/GetABacktrace Abort ====================================================================== From bug-notifications at lists.opencsw.org Wed Nov 20 13:53:30 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 20 Nov 2013 13:53:30 +0100 Subject: [pidgin 0005124]: cannot connect to yahoo and xmpp: SSL Handshake failed In-Reply-To: Message-ID: <02f3acfd57ee1999d5157edb24fa49e2@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5124 ====================================================================== Reported By: ghenry Assigned To: ====================================================================== Project: pidgin Issue ID: 5124 Category: regular use Reproducibility: always Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-20 13:22 CET Last Modified: 2013-11-20 13:53 CET ====================================================================== Summary: cannot connect to yahoo and xmpp: SSL Handshake failed Description: I'm on Solaris 10, sparc. Pidgin is 2.10.7 (2.10.7,REV=2013.10.24) it worked in the past, and yahoo and xmpp works with Solaris 11 pidgin ====================================================================== ---------------------------------------------------------------------- (0010643) ghenry (developer) - 2013-11-20 13:53 https://www.opencsw.org/mantis/view.php?id=5124#c10643 ---------------------------------------------------------------------- (13:49:12) proxy: Connecting to login.yahoo.com:443 with no proxy (13:49:12) proxy: Connection in progress (13:49:12) proxy: Connecting to login.yahoo.com:443. (13:49:12) proxy: Connected to login.yahoo.com:443. (13:49:12) nss: Handshake failed (-12268) (13:49:12) yahoo: Authentication: In yahoo_auth16_stage1_cb (13:49:12) yahoo: Login Failed, unable to retrieve login url: Unable to connect to login.yahoo.com: SSL Handshake Failed (13:49:12) connection: Connection error on 5c7110 (reason: 0 description: Unable to connect to login.yahoo.com: SSL Handshake Failed) (13:49:12) account: Disconnecting account mememe (166fa8) From bug-notifications at lists.opencsw.org Tue Nov 26 09:34:34 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 26 Nov 2013 09:34:34 +0100 Subject: [qt4_dev 0005122]: Missing development files to build custom widget plugins (libQtUiTools.a) In-Reply-To: <3bb565204aa2ac16794646288254a6ef> Message-ID: <4aa6e1f6ef5d6ee348f2aae2d7c1bf7c@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5122 ====================================================================== Reported By: Andreas Baumann Assigned To: cgrzemba ====================================================================== Project: qt4_dev Issue ID: 5122 Category: Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2013-11-10 11:22 CET Last Modified: 2013-11-26 09:34 CET ====================================================================== Summary: Missing development files to build custom widget plugins (libQtUiTools.a) Description: When linking a custom widget I get a missing -lQtUiTools error. I think '/opt/csw/gxx/lib/libQtUiTools.a' is missing. In archlinux the problem was that static libraries were not built and libQtUiTools.a exists only as static developemnt library. ====================================================================== ---------------------------------------------------------------------- (0010644) pfelecan (manager) - 2013-11-26 09:34 https://www.opencsw.org/mantis/view.php?id=5122#c10644 ---------------------------------------------------------------------- the 2013.11.26 release of qt4-dev provides the requested static library. From bug-notifications at lists.opencsw.org Tue Nov 26 15:31:39 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 26 Nov 2013 15:31:39 +0100 Subject: [git 0005126]: "git diff" broken Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5126 ====================================================================== Reported By: dam Assigned To: ====================================================================== Project: git Issue ID: 5126 Category: regular use Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-26 15:31 CET Last Modified: 2013-11-26 15:31 CET ====================================================================== Summary: "git diff" broken Description: "git diff" is broken in 1.8.4.1,REV=2013.10.27 but works in the previous 1.8.3.4,REV=2013.07.28. The output looks like this (not the escape-characters): dam at login [login]:/home/dam/mgar/pkg/openldap/trunk/work/solaris10-sparc/build-isa-sparcv8plus/openldap-2.4.38 > git diff ESC[1mdiff --git a/Makefile.in b/Makefile.inESC[m ESC[1mindex b566233..0e9da64 100644ESC[m ESC[1m--- a/Makefile.inESC[m ESC[1m+++ b/Makefile.inESC[m ESC[36m@@ -35,4 +35,4 @@ESC[m ESC[mdistclean: veryclean FORCEESC[m ESC[m check: testESC[m test: FORCEESC[m ESC[31m- cd tests; make testESC[m ESC[32m+ESC[m ESC[32mcd tests; $(MAKE) testESC[m It should look like this: dam at experimental10s [experimental10s]:/home/dam/mgar/pkg/openldap/trunk/work/solaris10-sparc/build-isa-sparcv8plus/openldap-2.4.38 > git diff diff --git a/Makefile.in b/Makefile.in index b566233..0e9da64 100644 --- a/Makefile.in +++ b/Makefile.in @@ -35,4 +35,4 @@ distclean: veryclean FORCE check: test test: FORCE - cd tests; make test + cd tests; $(MAKE) test Please note that this is not a terminal issue. ====================================================================== From bug-notifications at lists.opencsw.org Thu Nov 28 12:55:53 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 28 Nov 2013 12:55:53 +0100 Subject: [libnss_dev 0005119]: 64 bit nss.pc has broken libdir In-Reply-To: <2dd1c53f48f5d39a4a749428e01e646f> Message-ID: <336f2d3d1edf2250c66fb402a6ab4fe1@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5119 ====================================================================== Reported By: dam Assigned To: cgrzemba ====================================================================== Project: libnss_dev Issue ID: 5119 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2013-10-31 14:38 CET Last Modified: 2013-11-28 12:55 CET ====================================================================== Summary: 64 bit nss.pc has broken libdir Description: The 64 bit nss.pc has a broken libdir: prefix=/opt/csw exec_prefix=${prefix} libdir=${prefix}lib/64 includedir=${prefix}/include/nss As you see libdir is /opt/cswlib/64 instead of /opt/csw/lib/64. I fixed the unstable10* hosts manually for now. ====================================================================== ---------------------------------------------------------------------- (0010622) dam (administrator) - 2013-10-31 16:05 https://www.opencsw.org/mantis/view.php?id=5119#c10622 ---------------------------------------------------------------------- I took the liberty of fixing this in r22348. Feel free to respin any time :-) From bug-notifications at lists.opencsw.org Thu Nov 28 12:57:25 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 28 Nov 2013 12:57:25 +0100 Subject: [libnss_dev 0005119]: 64 bit nss.pc has broken libdir In-Reply-To: <2dd1c53f48f5d39a4a749428e01e646f> Message-ID: <525d0e40e3f70d9592cb9f8debb06721@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5119 ====================================================================== Reported By: dam Assigned To: cgrzemba ====================================================================== Project: libnss_dev Issue ID: 5119 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2013-10-31 14:38 CET Last Modified: 2013-11-28 12:57 CET ====================================================================== Summary: 64 bit nss.pc has broken libdir Description: The 64 bit nss.pc has a broken libdir: prefix=/opt/csw exec_prefix=${prefix} libdir=${prefix}lib/64 includedir=${prefix}/include/nss As you see libdir is /opt/cswlib/64 instead of /opt/csw/lib/64. I fixed the unstable10* hosts manually for now. ====================================================================== ---------------------------------------------------------------------- (0010645) cgrzemba (manager) - 2013-11-28 12:57 https://www.opencsw.org/mantis/view.php?id=5119#c10645 ---------------------------------------------------------------------- fixed in libnss_dev-3.14.4,REV=2013.11.28 From bug-notifications at lists.opencsw.org Fri Nov 29 11:30:45 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 11:30:45 +0100 Subject: [openssh_client 0005127]: ssh error messages Message-ID: <4d1cab2b1e43736c1927491387a62040@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5127 ====================================================================== Reported By: rrossi33 Assigned To: ====================================================================== Project: openssh_client Issue ID: 5127 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-29 11:30 CET Last Modified: 2013-11-29 11:30 CET ====================================================================== Summary: ssh error messages Description: Hi When you make ssh to Host/Server ,and you have no host keys. Then you get no such identity: /home/xxx/xxx/.ssh/id_rsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory followed by Password prompt. ssh -vvv Output: debug2: key: /home/xxx/xxx/.ssh/id_dsa (0), explicit debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0), explicit debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa no such identity: /home/xxx/xxx.ssh/id_rsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: Output older ssh -vvv ebug2: key: /home/xxx/xxx/.ssh/id_dsa (0) debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0) debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa debug3: no such identity: /home/xxx/xxx/.ssh/id_rsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa debug3: no such identity: /home/xxx/xxx/.ssh/id_dsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa debug3: no such identity: /home/xxx/xxx/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: It seems that debug1 left in Trying private key: ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 29 11:33:23 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 11:33:23 +0100 Subject: [openssh_client 0005127]: ssh error messages In-Reply-To: <9ec1de13a977a2b1e287c0ab40b61087> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5127 ====================================================================== Reported By: rrossi33 Assigned To: ====================================================================== Project: openssh_client Issue ID: 5127 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: new ====================================================================== Date Submitted: 2013-11-29 11:30 CET Last Modified: 2013-11-29 11:33 CET ====================================================================== Summary: ssh error messages Description: Hi When you make ssh to Host/Server ,and you have no host keys. Then you get no such identity: /home/xxx/xxx/.ssh/id_rsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory followed by Password prompt. ssh -vvv Output: debug2: key: /home/xxx/xxx/.ssh/id_dsa (0), explicit debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0), explicit debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa no such identity: /home/xxx/xxx.ssh/id_rsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: Output older ssh -vvv ebug2: key: /home/xxx/xxx/.ssh/id_dsa (0) debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0) debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa debug3: no such identity: /home/xxx/xxx/.ssh/id_rsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa debug3: no such identity: /home/xxx/xxx/.ssh/id_dsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa debug3: no such identity: /home/xxx/xxx/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: It seems that debug1 left in Trying private key: ====================================================================== ---------------------------------------------------------------------- (0010646) rrossi33 (reporter) - 2013-11-29 11:33 https://www.opencsw.org/mantis/view.php?id=5127#c10646 ---------------------------------------------------------------------- OpenSSH_6.2.p1, OpenSSL 1.0.1e 11 Feb 2013 older ssh OpenSSH_5.9p1, OpenSSL 0.9.8t 18 Jan 2012 From bug-notifications at lists.opencsw.org Fri Nov 29 12:06:02 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 12:06:02 +0100 Subject: [openssh_client 0005127]: ssh error messages In-Reply-To: <9ec1de13a977a2b1e287c0ab40b61087> Message-ID: <159a3d0ae8ac84af2d2b37a69836b191@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5127 ====================================================================== Reported By: rrossi33 Assigned To: yann ====================================================================== Project: openssh_client Issue ID: 5127 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-11-29 11:30 CET Last Modified: 2013-11-29 12:06 CET ====================================================================== Summary: ssh error messages Description: Hi When you make ssh to Host/Server ,and you have no host keys. Then you get no such identity: /home/xxx/xxx/.ssh/id_rsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory followed by Password prompt. ssh -vvv Output: debug2: key: /home/xxx/xxx/.ssh/id_dsa (0), explicit debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0), explicit debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa no such identity: /home/xxx/xxx.ssh/id_rsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: Output older ssh -vvv ebug2: key: /home/xxx/xxx/.ssh/id_dsa (0) debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0) debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa debug3: no such identity: /home/xxx/xxx/.ssh/id_rsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa debug3: no such identity: /home/xxx/xxx/.ssh/id_dsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa debug3: no such identity: /home/xxx/xxx/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: It seems that debug1 left in Trying private key: ====================================================================== ---------------------------------------------------------------------- (0010647) yann (manager) - 2013-11-29 12:06 https://www.opencsw.org/mantis/view.php?id=5127#c10647 ---------------------------------------------------------------------- This is strange, I don't reproduce your problem. When I do the same as you I have the same output you habe with the old version: [...] debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/yann/.ssh/id_rsa debug3: no such identity: /home/yann/.ssh/id_rsa: No such file or directory debug1: Trying private key: /home/yann/.ssh/id_dsa debug3: no such identity: /home/yann/.ssh/id_dsa: No such file or directory debug1: Trying private key: /home/yann/.ssh/id_ecdsa debug3: no such identity: /home/yann/.ssh/id_ecdsa: No such file or directory [...] I am currently using OpenSSH_6.4p1 which the last available in the unstable repository. From bug-notifications at lists.opencsw.org Fri Nov 29 12:40:54 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 12:40:54 +0100 Subject: [gstplugins 0003222]: Depend on CSWggettextrt In-Reply-To: <81ea9898975472ff23f6eafb4b00fa6f> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3222 ====================================================================== Reported By: harpchad Assigned To: cgrzemba ====================================================================== Project: gstplugins Issue ID: 3222 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-14 03:04 CET Last Modified: 2013-11-29 12:40 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 29 12:41:32 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 12:41:32 +0100 Subject: [gstplugins 0003222]: Depend on CSWggettextrt In-Reply-To: <81ea9898975472ff23f6eafb4b00fa6f> Message-ID: <8005365f0e7cfa6a06ae2b95c2dcc8a4@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3222 ====================================================================== Reported By: harpchad Assigned To: cgrzemba ====================================================================== Project: gstplugins Issue ID: 3222 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:04 CET Last Modified: 2013-11-29 12:41 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0010648) cgrzemba (manager) - 2013-11-29 12:41 https://www.opencsw.org/mantis/view.php?id=3222#c10648 ---------------------------------------------------------------------- package 0.10.32,REV=2013.08.19 delivered From bug-notifications at lists.opencsw.org Fri Nov 29 12:41:56 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 12:41:56 +0100 Subject: [gstplugins_good 0003362]: Depend on CSWggettextrt In-Reply-To: <2fe15c20edd0e7b5bf39545a65c0fe2f> Message-ID: <75593229fd3000ddb45ebbf1c8813cb3@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3362 ====================================================================== Reported By: harpchad Assigned To: cgrzemba ====================================================================== Project: gstplugins_good Issue ID: 3362 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-14 03:19 CET Last Modified: 2013-11-29 12:41 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== From bug-notifications at lists.opencsw.org Fri Nov 29 12:42:31 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 12:42:31 +0100 Subject: [gstplugins_good 0003362]: Depend on CSWggettextrt In-Reply-To: <2fe15c20edd0e7b5bf39545a65c0fe2f> Message-ID: <7504a7d6915ab206b0540545a4deb9bf@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3362 ====================================================================== Reported By: harpchad Assigned To: cgrzemba ====================================================================== Project: gstplugins_good Issue ID: 3362 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:19 CET Last Modified: 2013-11-29 12:42 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0010649) cgrzemba (manager) - 2013-11-29 12:42 https://www.opencsw.org/mantis/view.php?id=3362#c10649 ---------------------------------------------------------------------- package version 0.10.32,REV=2013.08.19 delivered From bug-notifications at lists.opencsw.org Fri Nov 29 13:15:07 2013 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 29 Nov 2013 13:15:07 +0100 Subject: [openssh_client 0005127]: ssh error messages In-Reply-To: <9ec1de13a977a2b1e287c0ab40b61087> Message-ID: <84f1c37082dda624278a365af890fe95@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5127 ====================================================================== Reported By: rrossi33 Assigned To: yann ====================================================================== Project: openssh_client Issue ID: 5127 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: feedback ====================================================================== Date Submitted: 2013-11-29 11:30 CET Last Modified: 2013-11-29 13:15 CET ====================================================================== Summary: ssh error messages Description: Hi When you make ssh to Host/Server ,and you have no host keys. Then you get no such identity: /home/xxx/xxx/.ssh/id_rsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory followed by Password prompt. ssh -vvv Output: debug2: key: /home/xxx/xxx/.ssh/id_dsa (0), explicit debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0), explicit debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa no such identity: /home/xxx/xxx.ssh/id_rsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa no such identity: /home/xxx/xxx/.ssh/id_dsa: No such file or directory debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa no such identity: /home/xxx/xxx/.ssh/id_ecdsa: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: Output older ssh -vvv ebug2: key: /home/xxx/xxx/.ssh/id_dsa (0) debug2: key: /home/xxx/xxx/.ssh/id_ecdsa (0) debug1: Authentications that can continue: publickey,password,keyboard-interactive,hostbased debug3: start over, passed a different list publickey,password,keyboard-interactive,hostbased debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/xxx/xxx/.ssh/id_rsa debug3: no such identity: /home/xxx/xxx/.ssh/id_rsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_dsa debug3: no such identity: /home/xxx/xxx/.ssh/id_dsa debug1: Trying private key: /home/xxx/xxx/.ssh/id_ecdsa debug3: no such identity: /home/xxx/xxx/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: It seems that debug1 left in Trying private key: ====================================================================== ---------------------------------------------------------------------- (0010650) yann (manager) - 2013-11-29 13:15 https://www.opencsw.org/mantis/view.php?id=5127#c10650 ---------------------------------------------------------------------- I retrieved OpenSSH_6.2 and indeed I can observe the same behavior. It has been introduced in OpenSSH 6.2 by this change: - dtucker at cvs.openbsd.org 2013/02/15 00:21:01 [sshconnect2.c] Warn more loudly if an IdentityFile provided by the user cannot be read. bz https://www.opencsw.org/mantis/view.php?id=1981, ok djm@ and it has been fixed in OpenSSH 6.3 by this change: - dtucker at cvs.openbsd.org 2013/02/22 04:45:09 [ssh.c readconf.c readconf.h] Don't complain if IdentityFiles specified in system-wide configs are missing. ok djm, deraadt. So you need to upgrade to the last Openssh package to fix this issue. Is there a reason why you were still using Openssh 6.2 ? Yann