From bug-notifications at lists.opencsw.org Tue Jul 1 12:39:07 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 1 Jul 2014 12:39:07 +0200 Subject: [liblzo2_2 0005183]: Security flaw in <2.07 In-Reply-To: <17ff94090db54e05d18463c87f0c1432> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5183 ====================================================================== Reported By: bonivart Assigned To: laurent ====================================================================== Project: liblzo2_2 Issue ID: 5183 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-06-26 23:26 CEST Last Modified: 2014-07-01 12:39 CEST ====================================================================== Summary: Security flaw in <2.07 Description: http://www.oberhumer.com/opensource/lzo/ http://www.darkreading.com/decades-old-vulnerability-threatens-internet-of-things/d/d-id/1278903 ====================================================================== From bug-notifications at lists.opencsw.org Tue Jul 1 12:39:32 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 1 Jul 2014 12:39:32 +0200 Subject: [liblzo2_2 0005183]: Security flaw in <2.07 In-Reply-To: <17ff94090db54e05d18463c87f0c1432> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5183 ====================================================================== Reported By: bonivart Assigned To: laurent ====================================================================== Project: liblzo2_2 Issue ID: 5183 Category: regular use Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2014-06-26 23:26 CEST Last Modified: 2014-07-01 12:39 CEST ====================================================================== Summary: Security flaw in <2.07 Description: http://www.oberhumer.com/opensource/lzo/ http://www.darkreading.com/decades-old-vulnerability-threatens-internet-of-things/d/d-id/1278903 ====================================================================== ---------------------------------------------------------------------- (0010862) dam (administrator) - 2014-07-01 12:39 https://www.opencsw.org/mantis/view.php?id=5183#c10862 ---------------------------------------------------------------------- Version 2.08,REV=2014.06.29 has been pushed to unstable/. From bug-notifications at lists.opencsw.org Tue Jul 1 14:15:00 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 1 Jul 2014 14:15:00 +0200 Subject: [squid 0005171]: upgrading squid erases the current conf file in /etc/opt/csw In-Reply-To: <651a6d613742832d7698b72b2b2aa61c> Message-ID: <0d27623068cf2c8c7d4be5c0cdd60a1e@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5171 ====================================================================== Reported By: ghenry Assigned To: dam ====================================================================== Project: squid Issue ID: 5171 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-05-16 07:01 CEST Last Modified: 2014-07-01 14:15 CEST ====================================================================== Summary: upgrading squid erases the current conf file in /etc/opt/csw Description: hello, on S10, i upgraded my current squid to the latest release: 3.4.5 and it replaces my conf file: /etc/opt/csw/squid/squid.conf Is it normal? when we upgrade pkgutil, it doesn't replace the existing pkgutil.conf. ====================================================================== From bug-notifications at lists.opencsw.org Tue Jul 1 14:17:28 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 1 Jul 2014 14:17:28 +0200 Subject: [squid 0005171]: upgrading squid erases the current conf file in /etc/opt/csw In-Reply-To: <651a6d613742832d7698b72b2b2aa61c> Message-ID: <13978e0937446bd6bdf5056de5ede594@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5171 ====================================================================== Reported By: ghenry Assigned To: dam ====================================================================== Project: squid Issue ID: 5171 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2014-05-16 07:01 CEST Last Modified: 2014-07-01 14:17 CEST ====================================================================== Summary: upgrading squid erases the current conf file in /etc/opt/csw Description: hello, on S10, i upgraded my current squid to the latest release: 3.4.5 and it replaces my conf file: /etc/opt/csw/squid/squid.conf Is it normal? when we upgrade pkgutil, it doesn't replace the existing pkgutil.conf. ====================================================================== ---------------------------------------------------------------------- (0010863) dam (administrator) - 2014-07-01 14:17 https://www.opencsw.org/mantis/view.php?id=5171#c10863 ---------------------------------------------------------------------- This was an error in 3.1 and has been fixed with the 3.4.4 release some time ago. Packages after 3.1 can be upgraded without squid.conf to vanish. From bug-notifications at lists.opencsw.org Wed Jul 2 13:03:48 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 2 Jul 2014 13:03:48 +0200 Subject: [netsnmp 0005184]: SNMP core dumps with greater than 20 interfaces plumbed up Message-ID: <72a7ab25b9e69d8f861b46aea1f1913a@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5184 ====================================================================== Reported By: ndb Assigned To: ====================================================================== Project: netsnmp Issue ID: 5184 Category: regular use Reproducibility: always Severity: crash Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-02 13:03 CEST Last Modified: 2014-07-02 13:03 CEST ====================================================================== Summary: SNMP core dumps with greater than 20 interfaces plumbed up Description: SNMP core dumps with greater than 20 interfaces plumbed up I have a production server with 24 netwotk interfaces plumbed up. I find that SNMP refuses to start. I am able to reporoduce this on a test server. I keep plumbing up interfaces using the "ifconfig : plumb" command. Once the 21st interface is added SMF immediately moves svc:/network/netsnmpd:default into maintenance state. # svcs -vx svc:/network/netsnmpd:default svc:/network/netsnmpd:default (?) State: maintenance since 2 July 2014 11:29:54 BST Reason: Method failed repeatedly. See: http://support.oracle.com/msg/SMF-8000-8Q See: /var/svc/log/network-netsnmpd:default.log Impact: This service is not running. # cat /var/svc/log/network-netsnmpd:default.log | grep Stop | tail -1 [ Jul 2 11:29:54 Stopping because process dumped core. ] # ls -larth /core -rw------- 1 root root 9.2M Jul 2 11:29 /core ====================================================================== From bug-notifications at lists.opencsw.org Wed Jul 2 17:45:45 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 2 Jul 2014 17:45:45 +0200 Subject: [xchat 0005185]: xchat wont connect to server Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5185 ====================================================================== Reported By: deus-programmer Assigned To: ====================================================================== Project: xchat Issue ID: 5185 Category: other Reproducibility: always Severity: crash Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-02 17:45 CEST Last Modified: 2014-07-02 17:45 CEST ====================================================================== Summary: xchat wont connect to server Description: sunserver% xchat process 1087: D-Bus library appears to be incorrectly set up; failed to read mac hine uuid: Failed to open "/etc/machine-id": No such file or directory See the manual page for dbus-uuidgen to correct this issue. D-Bus not compiled with backtrace support so unable to print a backtrace Abort (core dumped) ====================================================================== From bug-notifications at lists.opencsw.org Fri Jul 4 18:49:13 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 4 Jul 2014 18:49:13 +0200 Subject: [ruby_augeas 0005186]: CSWrubyaugeas is no longer working with latest version of CSWruby18 Message-ID: <0a36f1b0b3377912c20cc7c673b50fdf@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5186 ====================================================================== Reported By: vduncan Assigned To: ====================================================================== Project: ruby_augeas Issue ID: 5186 Category: Reproducibility: always Severity: tweak Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-04 18:49 CEST Last Modified: 2014-07-04 18:49 CEST ====================================================================== Summary: CSWrubyaugeas is no longer working with latest version of CSWruby18 Description: When updating CSWruby18 to version 1.8.7p357,REV=2014.05.06 on our servers, the _augeas.so library can no longer be found. CSWrubyaugeas is version 0.4.1,REV=2012.03.25. Version 1.8.7p334,REV=2011.03.24 of CSWruby18 works correctly with CSWrubyaugeas version 0.4.1,REV=2012.03.25. The problem is that _augeas.so is installed to: /opt/csw/lib/ruby/site_ruby/1.8/i386-solaris2.9 However, the latest version of ruby expects the library to be here: /opt/csw/lib/ruby/site_ruby/1.8/i386-solaris2.10 See Additional Information below for more details. I believe CSWrubyaugeas needs to be updated to install to the i386-solaris2.10 directory. ====================================================================== From bug-notifications at lists.opencsw.org Mon Jul 7 20:12:23 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Mon, 7 Jul 2014 20:12:23 +0200 Subject: [ap2_modphp5 0005187]: ap2_modphp5 is not compatible with apache2 or apache24 Message-ID: <482d583a457ef54e19fe9154d1b74cd1@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5187 ====================================================================== Reported By: jgillen Assigned To: ====================================================================== Project: ap2_modphp5 Issue ID: 5187 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-07 20:12 CEST Last Modified: 2014-07-07 20:12 CEST ====================================================================== Summary: ap2_modphp5 is not compatible with apache2 or apache24 Description: After installing either apache2 or apache24 with dependencies and ap2_modphp5, at the point in httpd.conf file where the libphp5.so module is loaded the following error occurs: modules/libphp5.so: symbol unixd_config: referenced symbol not found ====================================================================== From bug-notifications at lists.opencsw.org Tue Jul 8 12:12:59 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 8 Jul 2014 12:12:59 +0200 Subject: [ap2_modphp5 0005187]: ap2_modphp5 is not compatible with apache2 or apache24 In-Reply-To: <793ad66006fc2075aa55ec30d7cd2f3a> Message-ID: <7939b3ea228b3da3aab0b4a376828ef7@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5187 ====================================================================== Reported By: jgillen Assigned To: dam ====================================================================== Project: ap2_modphp5 Issue ID: 5187 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-07-07 20:12 CEST Last Modified: 2014-07-08 12:12 CEST ====================================================================== Summary: ap2_modphp5 is not compatible with apache2 or apache24 Description: After installing either apache2 or apache24 with dependencies and ap2_modphp5, at the point in httpd.conf file where the libphp5.so module is loaded the following error occurs: modules/libphp5.so: symbol unixd_config: referenced symbol not found ====================================================================== From bug-notifications at lists.opencsw.org Tue Jul 8 13:23:08 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 8 Jul 2014 13:23:08 +0200 Subject: [ap2_modphp5 0005187]: ap2_modphp5 is not compatible with apache2 or apache24 In-Reply-To: <793ad66006fc2075aa55ec30d7cd2f3a> Message-ID: <6f5e6e56f8d1d070dfccda6df714acc4@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5187 ====================================================================== Reported By: jgillen Assigned To: dam ====================================================================== Project: ap2_modphp5 Issue ID: 5187 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-07-07 20:12 CEST Last Modified: 2014-07-08 13:23 CEST ====================================================================== Summary: ap2_modphp5 is not compatible with apache2 or apache24 Description: After installing either apache2 or apache24 with dependencies and ap2_modphp5, at the point in httpd.conf file where the libphp5.so module is loaded the following error occurs: modules/libphp5.so: symbol unixd_config: referenced symbol not found ====================================================================== ---------------------------------------------------------------------- (0010864) dam (administrator) - 2014-07-08 13:23 https://www.opencsw.org/mantis/view.php?id=5187#c10864 ---------------------------------------------------------------------- Looks like this is this upstream bug: https://bugs.php.net/bug.php?id=66557 It did work in the past, what package versions for apache, php and modphp are you using? Best regards -- Dago From bug-notifications at lists.opencsw.org Tue Jul 8 14:22:34 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 8 Jul 2014 14:22:34 +0200 Subject: [ap2_modphp5 0005187]: ap2_modphp5 is not compatible with apache2 or apache24 In-Reply-To: <793ad66006fc2075aa55ec30d7cd2f3a> Message-ID: <49917c21ac6975744d29729c9fd14c32@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5187 ====================================================================== Reported By: jgillen Assigned To: dam ====================================================================== Project: ap2_modphp5 Issue ID: 5187 Category: regular use Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-07-07 20:12 CEST Last Modified: 2014-07-08 14:22 CEST ====================================================================== Summary: ap2_modphp5 is not compatible with apache2 or apache24 Description: After installing either apache2 or apache24 with dependencies and ap2_modphp5, at the point in httpd.conf file where the libphp5.so module is loaded the following error occurs: modules/libphp5.so: symbol unixd_config: referenced symbol not found ====================================================================== ---------------------------------------------------------------------- (0010865) jgillen (reporter) - 2014-07-08 14:22 https://www.opencsw.org/mantis/view.php?id=5187#c10865 ---------------------------------------------------------------------- I did not have OpenCSW Apache, PHP or modphp installed. Was using Solaris Apache but needed a working Apache with PHP and MySQL for Wordpress. Installed all fresh from OpenCSW and ran into the incompatibility between Apache and modphp. Initially I downloaded the CSWapache2 package which is 2.2.26,REV=2014.02.07; when I found the problem I also tried CSWapache24 2.4.7,REV=2014.02.21 - same problem. The PHP is CSWphp5 package v5.3.21,REV=2013.02.11 and CSWap2-modphp5 also shows v5.3.21,REV=2013.02.11. Also CSWlibaprutil1-0 1.5.0,REV=2013.11.28 is a dependency for CSWapache2 and CSWapache24. All were newly installed. I'm running now using PHP through CGI but this is not optimal. I saw the bug you reference online - looks like a simple fix if you have the source code. Best regards, Joe From bug-notifications at lists.opencsw.org Thu Jul 17 16:40:43 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 16:40:43 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules Message-ID: <4087f1e458c04329dcb27aa44c33fcb4@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 16:40 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== From bug-notifications at lists.opencsw.org Thu Jul 17 16:47:33 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 16:47:33 +0200 Subject: [rrdtool 0005189]: Its good to add on CSW the nagiosgraph Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5189 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5189 Category: other Reproducibility: N/A Severity: feature Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:47 CEST Last Modified: 2014-07-17 16:47 CEST ====================================================================== Summary: Its good to add on CSW the nagiosgraph Description: It is just a idea, I was trying to adaptate nagiosgraph on Solaris 11 with your library of perl and rrdtool. For this case rrdtool needs the perl modules and unfortunatly the modules is not working, I already opened a Issue with this bug, but it is good to add nagiosgraph on your packages. Thanks ====================================================================== From bug-notifications at lists.opencsw.org Thu Jul 17 16:53:04 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 16:53:04 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: <3f086e5bb1535610325b1c6b10a9b3f0@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 16:53 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010866) keziacp (reporter) - 2014-07-17 16:53 https://www.opencsw.org/mantis/view.php?id=5188#c10866 ---------------------------------------------------------------------- Platform: Solaris 11 Sun SPARC T3 From bug-notifications at lists.opencsw.org Thu Jul 17 16:53:10 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 16:53:10 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: <1c1f7023ee2687a3df9dc4583b8b16c4@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 16:53 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010867) keziacp (reporter) - 2014-07-17 16:53 https://www.opencsw.org/mantis/view.php?id=5188#c10867 ---------------------------------------------------------------------- Platform: Solaris 11 Sun SPARC T3 From bug-notifications at lists.opencsw.org Thu Jul 17 16:53:15 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 16:53:15 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: <98b6e9a1a6f3dc1da83ecd81db7aa7e1@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 16:53 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010868) keziacp (reporter) - 2014-07-17 16:53 https://www.opencsw.org/mantis/view.php?id=5188#c10868 ---------------------------------------------------------------------- Platform: Solaris 11 Sun SPARC T3 From bug-notifications at lists.opencsw.org Thu Jul 17 17:11:11 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 17:11:11 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 17:11 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010869) keziacp (reporter) - 2014-07-17 17:11 https://www.opencsw.org/mantis/view.php?id=5188#c10869 ---------------------------------------------------------------------- perl -v This is perl, v5.10.1 (csw-5.10.1*) built for sun4-solaris-thread-multi Copyright 1987-2009, Larry Wall Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page. perldoc -l RRDs No documentation found for "RRDs". From bug-notifications at lists.opencsw.org Thu Jul 17 17:11:27 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 17:11:27 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: <7c8e797b2b27cd65dc6611fb21e3698d@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 17:11 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010870) keziacp (reporter) - 2014-07-17 17:11 https://www.opencsw.org/mantis/view.php?id=5188#c10870 ---------------------------------------------------------------------- https://www.opencsw.org/mantis/view.php?id=4858 From bug-notifications at lists.opencsw.org Thu Jul 17 17:16:52 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 17:16:52 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: <7e51ea21a14b1fbf7ce97559fbda094b@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 17:16 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010871) keziacp (reporter) - 2014-07-17 17:16 https://www.opencsw.org/mantis/view.php?id=5188#c10871 ---------------------------------------------------------------------- RRDtool 1.4.8 Copyright 1997-2013 by Tobias Oetiker Compiled May 23 2013 10:37:39 Usage: rrdtool [options] command command_options Valid commands: create, update, updatev, graph, graphv, dump, restore, last, lastupdate, first, info, fetch, tune, resize, xport, flushcached RRDtool is distributed under the Terms of the GNU General Public License Version 2. (www.gnu.org/copyleft/gpl.html) For more information read the RRD manpages From bug-notifications at lists.opencsw.org Thu Jul 17 23:13:32 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 23:13:32 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: <926e31385908b684657ecaf9fb15e08d@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: dam ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 23:13 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010871) keziacp (reporter) - 2014-07-17 17:16 https://www.opencsw.org/mantis/view.php?id=5188#c10871 ---------------------------------------------------------------------- RRDtool 1.4.8 Copyright 1997-2013 by Tobias Oetiker Compiled May 23 2013 10:37:39 Usage: rrdtool [options] command command_options Valid commands: create, update, updatev, graph, graphv, dump, restore, last, lastupdate, first, info, fetch, tune, resize, xport, flushcached RRDtool is distributed under the Terms of the GNU General Public License Version 2. (www.gnu.org/copyleft/gpl.html) For more information read the RRD manpages From bug-notifications at lists.opencsw.org Thu Jul 17 23:15:44 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 23:15:44 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: dam ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-17 23:15 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010872) dam (administrator) - 2014-07-17 23:15 https://www.opencsw.org/mantis/view.php?id=5188#c10872 ---------------------------------------------------------------------- You need to install the Perl bindings for rrdtool explicitly: CSWpm-rrdtool https://buildfarm.opencsw.org/source/xref/opencsw/csw/mgar/pkg/rrdtool/trunk/Makefile#75 ngshared ist not part of rrdtool. I hope this fixes your issue. From bug-notifications at lists.opencsw.org Thu Jul 17 23:16:54 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 17 Jul 2014 23:16:54 +0200 Subject: [rrdtool 0005189]: Its good to add on CSW the nagiosgraph In-Reply-To: Message-ID: <02d02494d25bddf1769145d70276c089@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5189 ====================================================================== Reported By: keziacp Assigned To: dam ====================================================================== Project: rrdtool Issue ID: 5189 Category: other Reproducibility: N/A Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-07-17 16:47 CEST Last Modified: 2014-07-17 23:16 CEST ====================================================================== Summary: Its good to add on CSW the nagiosgraph Description: It is just a idea, I was trying to adaptate nagiosgraph on Solaris 11 with your library of perl and rrdtool. For this case rrdtool needs the perl modules and unfortunatly the modules is not working, I already opened a Issue with this bug, but it is good to add nagiosgraph on your packages. Thanks ====================================================================== From bug-notifications at lists.opencsw.org Fri Jul 18 15:03:33 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 18 Jul 2014 15:03:33 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: <70c3aea387e2d29b2369216e9b9b1936@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: dam ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-18 15:03 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010874) keziacp (reporter) - 2014-07-18 15:03 https://www.opencsw.org/mantis/view.php?id=5188#c10874 ---------------------------------------------------------------------- This worked =D Thanks a milion From bug-notifications at lists.opencsw.org Fri Jul 18 17:20:29 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 18 Jul 2014 17:20:29 +0200 Subject: [py_salt 0005190]: py_salt Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5190 ====================================================================== Reported By: janci Assigned To: ====================================================================== Project: py_salt Issue ID: 5190 Category: Reproducibility: always Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-18 17:20 CEST Last Modified: 2014-07-18 17:20 CEST ====================================================================== Summary: py_salt Description: Hi, salt-minion does not work after install. The problem is that python modules that are installed as dependencies are not for python 2.7 and salt requires python 2.7 to run (because of #!/opt/csw/bin/python2.7 in the main binary). Namely, these modules should be updated to support 2.7: PyYAML pyzmq msgpack-python (because they install into /opt/csw/lib/python instead of /opt/csw/lib/python2.[67]) And CSWpython27 should be also added to dep list. ====================================================================== From bug-notifications at lists.opencsw.org Fri Jul 18 19:22:48 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 18 Jul 2014 19:22:48 +0200 Subject: [rrdtool 0005188]: rrdtool doesnt work with perl modules In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5188 ====================================================================== Reported By: keziacp Assigned To: dam ====================================================================== Project: rrdtool Issue ID: 5188 Category: other Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2014-07-17 16:40 CEST Last Modified: 2014-07-18 19:22 CEST ====================================================================== Summary: rrdtool doesnt work with perl modules Description: The packege of rrdtool doesnt work with the perl modules on Solaris 11. ====================================================================== ---------------------------------------------------------------------- (0010874) keziacp (reporter) - 2014-07-18 15:03 https://www.opencsw.org/mantis/view.php?id=5188#c10874 ---------------------------------------------------------------------- This worked =D Thanks a milion From bug-notifications at lists.opencsw.org Fri Jul 18 19:25:54 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Fri, 18 Jul 2014 19:25:54 +0200 Subject: [py_salt 0005190]: py_salt In-Reply-To: <1650d2c0f2fd2374513970f159de71fc> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5190 ====================================================================== Reported By: janci Assigned To: ====================================================================== Project: py_salt Issue ID: 5190 Category: Reproducibility: always Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-18 17:20 CEST Last Modified: 2014-07-18 19:25 CEST ====================================================================== Summary: py_salt Description: Hi, salt-minion does not work after install. The problem is that python modules that are installed as dependencies are not for python 2.7 and salt requires python 2.7 to run (because of #!/opt/csw/bin/python2.7 in the main binary). Namely, these modules should be updated to support 2.7: PyYAML pyzmq msgpack-python (because they install into /opt/csw/lib/python instead of /opt/csw/lib/python2.[67]) And CSWpython27 should be also added to dep list. ====================================================================== ---------------------------------------------------------------------- (0010875) dam (administrator) - 2014-07-18 19:25 https://www.opencsw.org/mantis/view.php?id=5190#c10875 ---------------------------------------------------------------------- Are you using 0.14.0,REV=2013.08.04 ? That version is working fine. You can find it in bratislava, kiel and unstable. From bug-notifications at lists.opencsw.org Mon Jul 21 11:16:13 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Mon, 21 Jul 2014 11:16:13 +0200 Subject: [py_salt 0005190]: py_salt In-Reply-To: <1650d2c0f2fd2374513970f159de71fc> Message-ID: <02a41bd43fb2f8ed717fe6be5d34bce2@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5190 ====================================================================== Reported By: janci Assigned To: ====================================================================== Project: py_salt Issue ID: 5190 Category: Reproducibility: always Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-18 17:20 CEST Last Modified: 2014-07-21 11:16 CEST ====================================================================== Summary: py_salt Description: Hi, salt-minion does not work after install. The problem is that python modules that are installed as dependencies are not for python 2.7 and salt requires python 2.7 to run (because of #!/opt/csw/bin/python2.7 in the main binary). Namely, these modules should be updated to support 2.7: PyYAML pyzmq msgpack-python (because they install into /opt/csw/lib/python instead of /opt/csw/lib/python2.[67]) And CSWpython27 should be also added to dep list. ====================================================================== ---------------------------------------------------------------------- (0010876) janci (reporter) - 2014-07-21 11:16 https://www.opencsw.org/mantis/view.php?id=5190#c10876 ---------------------------------------------------------------------- Yup, exactly this version. From unstable. Actually salt package itself is probably fine (only terribly outdated). But it is not working with current deps - I've tried 3 clean installations (full pkgutil -u before that) and none has worked. It misses python modules I've mentioned. They are installed with salt as its dependencies but salt will not find them because it does not search include path /opt/csw/lib/python. Or am I missing something? From bug-notifications at lists.opencsw.org Tue Jul 22 15:55:30 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 22 Jul 2014 15:55:30 +0200 Subject: [postfix 0005191]: missing link if deinstalling SUNWsndmu Message-ID: <1195534d69b8d3425d0f5514e220f6c1@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5191 ====================================================================== Reported By: ghenry Assigned To: ====================================================================== Project: postfix Issue ID: 5191 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-22 15:55 CEST Last Modified: 2014-07-22 15:55 CEST ====================================================================== Summary: missing link if deinstalling SUNWsndmu Description: on sparc S10, i got this error: Can't exec "sendmail": No such file or directory at /opt/csw/bin/logwatch.pl line 1017, line 3. Can't execute sendmail -t: No such file or directory CSWpostfix-2.9.4,REV=2012.09.19 is installed, and i removed SUNWsndmr SUNWsndmu, as stated in /opt/csw/share/doc/postfix/README.CSW. The links are ok: fury # ls -l /usr/lib/sendmail /usr/sbin/newaliases /usr/bin/mailq lrwxrwxrwx 1 root root 18 Jul 21 14:50 /usr/bin/mailq -> /opt/csw/bin/mailq lrwxrwxrwx 1 root root 22 Jul 21 14:50 /usr/lib/sendmail -> /opt/csw/sbin/sendmail lrwxrwxrwx 1 root root 23 Jul 21 14:50 /usr/sbin/newaliases -> /opt/csw/bin/newaliases does it mean that it just lacks the link: /usr/sbin/sendmail -> /opt/csw/sbin/sendmail ====================================================================== From bug-notifications at lists.opencsw.org Thu Jul 24 17:48:23 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 24 Jul 2014 17:48:23 +0200 Subject: [nagios_plugins 0005147]: check_disk incorrectly reports free space for zfs filesystems larger than 1TB In-Reply-To: <41833d3740f831c899b9f44c2ed4992b> Message-ID: <11a7a5cde7a1951dd5a60471c21aea2e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5147 ====================================================================== Reported By: salderman1 Assigned To: dam ====================================================================== Project: nagios_plugins Issue ID: 5147 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2014-02-06 22:14 CET Last Modified: 2014-07-24 17:48 CEST ====================================================================== Summary: check_disk incorrectly reports free space for zfs filesystems larger than 1TB Description: We have several SPARC T3 and T4 servers using OpenCSW nagios-plugins-1.4.16 from the testing tree. The servers which have ZFS filesystems larger than 1TB have their capacity incorrectly reported by check_disk... Example: # /opt/csw/libexec/nagios-plugins/check_disk -w 20% -c 10% -R "^/$|oracle$|^/u[0-9]+" -X tmpfs DISK OK - free space: / 198350 MB (94% inode=99%); /u01 36540 MB (36% inode=99%); /u02 36540 MB (36% inode=99%); /u03 19764 MB (98% inode=99%); /u04 19764 MB (98% inode=99%); /u05 19764 MB (98% inode=99%);| /=11288MB;167711;188675;0;209639 /u01=64001MB;80433;90487;0;100542 /u02=64001MB;80433;90487;0;100542 /u03=267MB;16025;18028;0;20032 /u04=267MB;16025;18028;0;20032 /u05=267MB;16025;18028;0;20032 # df -h |grep u0 zpool01/u01 98G 63G 36G 64% /u01 zpool02/u02 2.4T 1.9T 579G 77% /u02 zpool03/u03 20G 268M 19G 2% /u03 zpool04/u04 4.9T 2.4T 2.4T 51% /u04 zpool05/u05 4.9T 839G 4.1T 17% /u05 Notice /u02, /u04 and /u05's free space is incorrectly reported in the check_disk output. I have opened an issue on the nagios-plugins support forum and with their help have come to the conclusion that this issue has been resolved in nagios-plugins-1.5. Here is the 1.5 version's output from the same server of the example above: # ./check_disk -w 20% -c 10% -R "^/$|oracle$|^/u[0-9]+" -X tmpfs DISK OK - free space: / 198350 MB (94% inode=99%); /u01 36540 MB (36% inode=99%); /u02 592830 MB (23% inode=99%); /u03 19765 MB (98% inode=99%); /u04 2562448 MB (49% inode=99%); /u05 4269915 MB (83% inode=99%);| /=11288MB;167711;188675;0;209639 /u01=64001MB;80433;90487;0;100542 /u02=1971316MB;2051316;2307731;0;2564146 /u03=267MB;16025;18028;0;20032 /u04=2566246MB;4102955;4615824;0;5128694 /u05=858723MB;4102911;4615775;0;5128639 /u02, /u04, and /u05 are now reporting correctly. I would like to request updated packages for unstable. ====================================================================== ---------------------------------------------------------------------- (0010877) salderman1 (reporter) - 2014-07-24 17:48 https://www.opencsw.org/mantis/view.php?id=5147#c10877 ---------------------------------------------------------------------- I can confirm this patch seems to work. For whatever reason, I missed the update on this ticket when it was issued. We had the issue come up again, and I tracked this ticket down, put the new package on the system and the monitor cleaned up immediately on next check. Thanks for the effort. Do you have an eta on when this might be promoted to the testing branch? From bug-notifications at lists.opencsw.org Thu Jul 24 18:58:50 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Thu, 24 Jul 2014 18:58:50 +0200 Subject: [nagios_plugins 0005147]: check_disk incorrectly reports free space for zfs filesystems larger than 1TB In-Reply-To: <41833d3740f831c899b9f44c2ed4992b> Message-ID: <7aaede834485ec5ab5768de495babbc0@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5147 ====================================================================== Reported By: salderman1 Assigned To: dam ====================================================================== Project: nagios_plugins Issue ID: 5147 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2014-02-06 22:14 CET Last Modified: 2014-07-24 18:58 CEST ====================================================================== Summary: check_disk incorrectly reports free space for zfs filesystems larger than 1TB Description: We have several SPARC T3 and T4 servers using OpenCSW nagios-plugins-1.4.16 from the testing tree. The servers which have ZFS filesystems larger than 1TB have their capacity incorrectly reported by check_disk... Example: # /opt/csw/libexec/nagios-plugins/check_disk -w 20% -c 10% -R "^/$|oracle$|^/u[0-9]+" -X tmpfs DISK OK - free space: / 198350 MB (94% inode=99%); /u01 36540 MB (36% inode=99%); /u02 36540 MB (36% inode=99%); /u03 19764 MB (98% inode=99%); /u04 19764 MB (98% inode=99%); /u05 19764 MB (98% inode=99%);| /=11288MB;167711;188675;0;209639 /u01=64001MB;80433;90487;0;100542 /u02=64001MB;80433;90487;0;100542 /u03=267MB;16025;18028;0;20032 /u04=267MB;16025;18028;0;20032 /u05=267MB;16025;18028;0;20032 # df -h |grep u0 zpool01/u01 98G 63G 36G 64% /u01 zpool02/u02 2.4T 1.9T 579G 77% /u02 zpool03/u03 20G 268M 19G 2% /u03 zpool04/u04 4.9T 2.4T 2.4T 51% /u04 zpool05/u05 4.9T 839G 4.1T 17% /u05 Notice /u02, /u04 and /u05's free space is incorrectly reported in the check_disk output. I have opened an issue on the nagios-plugins support forum and with their help have come to the conclusion that this issue has been resolved in nagios-plugins-1.5. Here is the 1.5 version's output from the same server of the example above: # ./check_disk -w 20% -c 10% -R "^/$|oracle$|^/u[0-9]+" -X tmpfs DISK OK - free space: / 198350 MB (94% inode=99%); /u01 36540 MB (36% inode=99%); /u02 592830 MB (23% inode=99%); /u03 19765 MB (98% inode=99%); /u04 2562448 MB (49% inode=99%); /u05 4269915 MB (83% inode=99%);| /=11288MB;167711;188675;0;209639 /u01=64001MB;80433;90487;0;100542 /u02=1971316MB;2051316;2307731;0;2564146 /u03=267MB;16025;18028;0;20032 /u04=2566246MB;4102955;4615824;0;5128694 /u05=858723MB;4102911;4615775;0;5128639 /u02, /u04, and /u05 are now reporting correctly. I would like to request updated packages for unstable. ====================================================================== ---------------------------------------------------------------------- (0010878) dam (administrator) - 2014-07-24 18:58 https://www.opencsw.org/mantis/view.php?id=5147#c10878 ---------------------------------------------------------------------- Updated packages 1.5,REV=2014.03.03 have been pushed to unstable/ and testing/. From bug-notifications at lists.opencsw.org Mon Jul 28 11:03:15 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Mon, 28 Jul 2014 11:03:15 +0200 Subject: [iftop 0004557]: iftop displays zeroes for all values In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4557 ====================================================================== Reported By: laurent Assigned To: laurent ====================================================================== Project: iftop Issue ID: 4557 Category: regular use Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-09-30 11:21 CEST Last Modified: 2014-07-28 11:03 CEST ====================================================================== Summary: iftop displays zeroes for all values Description: Following an upgrade to the current or unstable branches, iftop stops working and displays only zeroes: TX: cumm: 0B peak: 0b rates: 0b 0b 0b RX: 0B 0b 0b 0b 0b TOTAL: 0B 0b 0b 0b 0b Switching back to the stable branch, and reinstalling only iftop and libpcap, it works again. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0004859 iftop does not work with libpcap ====================================================================== ---------------------------------------------------------------------- (0009402) dam (administrator) - 2011-11-10 15:24 https://www.opencsw.org/mantis/view.php?id=4557#c9402 ---------------------------------------------------------------------- I have verified the problem with newly build 0.17 and 1.0pre2, both don't show any traffic with libpcap 1.1.1, but do show with 0.9.7. I'll get in contact with Paul. From bug-notifications at lists.opencsw.org Mon Jul 28 11:06:21 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Mon, 28 Jul 2014 11:06:21 +0200 Subject: [iftop 0004557]: iftop displays zeroes for all values In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4557 ====================================================================== Reported By: laurent Assigned To: laurent ====================================================================== Project: iftop Issue ID: 4557 Category: regular use Reproducibility: always Severity: block Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-09-30 11:21 CEST Last Modified: 2014-07-28 11:06 CEST ====================================================================== Summary: iftop displays zeroes for all values Description: Following an upgrade to the current or unstable branches, iftop stops working and displays only zeroes: TX: cumm: 0B peak: 0b rates: 0b 0b 0b RX: 0B 0b 0b 0b 0b TOTAL: 0B 0b 0b 0b 0b Switching back to the stable branch, and reinstalling only iftop and libpcap, it works again. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0004859 iftop does not work with libpcap ====================================================================== ---------------------------------------------------------------------- (0010879) laurent (manager) - 2014-07-28 11:06 https://www.opencsw.org/mantis/view.php?id=4557#c10879 ---------------------------------------------------------------------- After upgrading to 1.0pre4, I observe the following behaviour: it works on my yukonx interface it does not work on the rge interface. So it probably is an incompatibility with some drivers, maybe introduced at some point in S10 or libpcap. At this point, I think closing the bug is the best way forward. From bug-notifications at lists.opencsw.org Tue Jul 29 21:13:25 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Tue, 29 Jul 2014 21:13:25 +0200 Subject: [rrdtool 0005192]: Its good to add on CSW the nagvis Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5192 ====================================================================== Reported By: keziacp Assigned To: ====================================================================== Project: rrdtool Issue ID: 5192 Category: upgrade Reproducibility: N/A Severity: trivial Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-29 21:13 CEST Last Modified: 2014-07-29 21:13 CEST ====================================================================== Summary: Its good to add on CSW the nagvis Description: It is just a idea, I was trying to install nagvis on Solaris 11 with your library, but still doesnt exist. Is much easy if you have this in your packages. It is dependent of nagios. Thanks ====================================================================== From bug-notifications at lists.opencsw.org Wed Jul 30 10:17:49 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 30 Jul 2014 10:17:49 +0200 Subject: [openssl_utils 0005193]: OpenSSL does not look for the certificates in the right place Message-ID: <2b8e13c326d9050caa00a89f68a8cb55@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5193 ====================================================================== Reported By: laurent Assigned To: ====================================================================== Project: openssl_utils Issue ID: 5193 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-30 10:17 CEST Last Modified: 2014-07-30 10:17 CEST ====================================================================== Summary: OpenSSL does not look for the certificates in the right place Description: I'm not 100% sure this is only an OpenSSL issue, but I think it's the right place to start: Symptom is that OpenCSW wget refuses to connect via https because the certificate cannot be verified: $ type wget wget is hashed (/opt/csw/bin/wget) $ wget https://github.com/oetiker/znapzend/releases/download/v0.8.3/znapzend-0.8.3.tar.gz --2014-07-30 10:06:42-- https://github.com/oetiker/znapzend/releases/download/v0.8.3/znapzend-0.8.3.tar.gz Resolving github.com (github.com)... 192.30.252.131 Connecting to github.com (github.com)|192.30.252.131|:443... connected. ERROR: cannot verify github.com's certificate, issued by '/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 Extended Validation Server CA': Unable to locally verify the issuer's authority. To connect to github.com insecurely, use `--no-check-certificate'. truss shows it's failing to find it, and is looking in a non-existent directory: 27097: xstat(2, "/opt/csw/ssl/certs/244b5494.0", 0x08046AB0) Err#2 ENOENT Just adding a symlink to the right directory is enough to make it work: # ln -s /etc/opt/csw/ssl/certs /opt/csw/ssl/ So I guess either the symlink should be packaged, or OpenSSL should be built to look into /etc/opt/csw/ssl/certs by default. My preference goes to the latter. ====================================================================== From bug-notifications at lists.opencsw.org Wed Jul 30 15:46:14 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 30 Jul 2014 15:46:14 +0200 Subject: [pm_testpodcoverage 0005194]: Please upgrade to 1.10 and fix dependency names Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5194 ====================================================================== Reported By: bonivart Assigned To: ====================================================================== Project: pm_testpodcoverage Issue ID: 5194 Category: upgrade Reproducibility: N/A Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-30 15:46 CEST Last Modified: 2014-07-30 15:46 CEST ====================================================================== Summary: Please upgrade to 1.10 and fix dependency names Description: Please upgrade to 1.10 and fix dependency names ====================================================================== From bug-notifications at lists.opencsw.org Wed Jul 30 23:33:06 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 30 Jul 2014 23:33:06 +0200 Subject: [logwatch 0005191]: missing link if deinstalling SUNWsndmu In-Reply-To: <2f5b3f0227ca396d97ef9bc69647c667> Message-ID: <004854808bf531f099d3bc57ee2b3064@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5191 ====================================================================== Reported By: ghenry Assigned To: ====================================================================== Project: logwatch Issue ID: 5191 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2014-07-22 15:55 CEST Last Modified: 2014-07-30 23:33 CEST ====================================================================== Summary: missing link if deinstalling SUNWsndmu Description: on sparc S10, i got this error: Can't exec "sendmail": No such file or directory at /opt/csw/bin/logwatch.pl line 1017, line 3. Can't execute sendmail -t: No such file or directory CSWpostfix-2.9.4,REV=2012.09.19 is installed, and i removed SUNWsndmr SUNWsndmu, as stated in /opt/csw/share/doc/postfix/README.CSW. The links are ok: fury # ls -l /usr/lib/sendmail /usr/sbin/newaliases /usr/bin/mailq lrwxrwxrwx 1 root root 18 Jul 21 14:50 /usr/bin/mailq -> /opt/csw/bin/mailq lrwxrwxrwx 1 root root 22 Jul 21 14:50 /usr/lib/sendmail -> /opt/csw/sbin/sendmail lrwxrwxrwx 1 root root 23 Jul 21 14:50 /usr/sbin/newaliases -> /opt/csw/bin/newaliases does it mean that it just lacks the link: /usr/sbin/sendmail -> /opt/csw/sbin/sendmail ====================================================================== ---------------------------------------------------------------------- (0010881) bwalton (administrator) - 2014-07-30 23:33 https://www.opencsw.org/mantis/view.php?id=5191#c10881 ---------------------------------------------------------------------- This is a logwatch problem, not a postfix problem. Logwatch should find /usr/lib/sendmail which is the canonical path for sendmail on Solaris. The fact that it worked with postfix having linked sendmail in /usr/sbin is just coincidence. I've released an updated logwatch that will prefer /usr/lib/sendmail by default and thus work with any mailer. From bug-notifications at lists.opencsw.org Wed Jul 30 23:33:28 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 30 Jul 2014 23:33:28 +0200 Subject: [logwatch 0005191]: missing link if deinstalling SUNWsndmu In-Reply-To: <2f5b3f0227ca396d97ef9bc69647c667> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=5191 ====================================================================== Reported By: ghenry Assigned To: ====================================================================== Project: logwatch Issue ID: 5191 Category: packaging Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2014-07-22 15:55 CEST Last Modified: 2014-07-30 23:33 CEST ====================================================================== Summary: missing link if deinstalling SUNWsndmu Description: on sparc S10, i got this error: Can't exec "sendmail": No such file or directory at /opt/csw/bin/logwatch.pl line 1017, line 3. Can't execute sendmail -t: No such file or directory CSWpostfix-2.9.4,REV=2012.09.19 is installed, and i removed SUNWsndmr SUNWsndmu, as stated in /opt/csw/share/doc/postfix/README.CSW. The links are ok: fury # ls -l /usr/lib/sendmail /usr/sbin/newaliases /usr/bin/mailq lrwxrwxrwx 1 root root 18 Jul 21 14:50 /usr/bin/mailq -> /opt/csw/bin/mailq lrwxrwxrwx 1 root root 22 Jul 21 14:50 /usr/lib/sendmail -> /opt/csw/sbin/sendmail lrwxrwxrwx 1 root root 23 Jul 21 14:50 /usr/sbin/newaliases -> /opt/csw/bin/newaliases does it mean that it just lacks the link: /usr/sbin/sendmail -> /opt/csw/sbin/sendmail ====================================================================== ---------------------------------------------------------------------- (0010881) bwalton (administrator) - 2014-07-30 23:33 https://www.opencsw.org/mantis/view.php?id=5191#c10881 ---------------------------------------------------------------------- This is a logwatch problem, not a postfix problem. Logwatch should find /usr/lib/sendmail which is the canonical path for sendmail on Solaris. The fact that it worked with postfix having linked sendmail in /usr/sbin is just coincidence. I've released an updated logwatch that will prefer /usr/lib/sendmail by default and thus work with any mailer. From bug-notifications at lists.opencsw.org Wed Jul 30 23:33:38 2014 From: bug-notifications at lists.opencsw.org (Mantis Bug Tracker via bug-notifications) Date: Wed, 30 Jul 2014 23:33:38 +0200 Subject: [logwatch 0005191]: missing link if deinstalling SUNWsndmu In-Reply-To: <2f5b3f0227ca396d97ef9bc69647c667> Message-ID: <9c345b1612c08924a3eb8f9feec3f1c4@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=5191 ====================================================================== Reported By: ghenry Assigned To: bwalton ====================================================================== Project: logwatch Issue ID: 5191 Category: packaging Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2014-07-22 15:55 CEST Last Modified: 2014-07-30 23:33 CEST ====================================================================== Summary: missing link if deinstalling SUNWsndmu Description: on sparc S10, i got this error: Can't exec "sendmail": No such file or directory at /opt/csw/bin/logwatch.pl line 1017, line 3. Can't execute sendmail -t: No such file or directory CSWpostfix-2.9.4,REV=2012.09.19 is installed, and i removed SUNWsndmr SUNWsndmu, as stated in /opt/csw/share/doc/postfix/README.CSW. The links are ok: fury # ls -l /usr/lib/sendmail /usr/sbin/newaliases /usr/bin/mailq lrwxrwxrwx 1 root root 18 Jul 21 14:50 /usr/bin/mailq -> /opt/csw/bin/mailq lrwxrwxrwx 1 root root 22 Jul 21 14:50 /usr/lib/sendmail -> /opt/csw/sbin/sendmail lrwxrwxrwx 1 root root 23 Jul 21 14:50 /usr/sbin/newaliases -> /opt/csw/bin/newaliases does it mean that it just lacks the link: /usr/sbin/sendmail -> /opt/csw/sbin/sendmail ====================================================================== ---------------------------------------------------------------------- (0010881) bwalton (administrator) - 2014-07-30 23:33 https://www.opencsw.org/mantis/view.php?id=5191#c10881 ---------------------------------------------------------------------- This is a logwatch problem, not a postfix problem. Logwatch should find /usr/lib/sendmail which is the canonical path for sendmail on Solaris. The fact that it worked with postfix having linked sendmail in /usr/sbin is just coincidence. I've released an updated logwatch that will prefer /usr/lib/sendmail by default and thus work with any mailer.