From phil at bolthole.com Fri Jul 2 19:06:45 2010 From: phil at bolthole.com (Philip Brown) Date: Fri, 2 Jul 2010 10:06:45 -0700 Subject: [csw-buildfarm] gtk_engines Message-ID: pelase upgrade gtk_engines From bwalton at opencsw.org Sat Jul 3 04:37:14 2010 From: bwalton at opencsw.org (Ben Walton) Date: Fri, 02 Jul 2010 22:37:14 -0400 Subject: [csw-buildfarm] gtk_engines In-Reply-To: References: Message-ID: <1278124623-sup-5684@pinkfloyd.chass.utoronto.ca> Excerpts from Philip Brown's message of Fri Jul 02 13:06:45 -0400 2010: > pelase upgrade gtk_engines Doing this now... -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From william at wbonnet.net Sat Jul 3 23:51:55 2010 From: william at wbonnet.net (William Bonnet) Date: Sat, 03 Jul 2010 23:51:55 +0200 Subject: [csw-buildfarm] Package installation request Message-ID: <4C2FB0FB.30801@wbonnet.net> Hi could you please install the following packages on testing10x ==> Verifying installed package CSWpy-hachoir-core: MISSING ==> Verifying installed package CSWpy-hachoir-parser: MISSING ==> Verifying installed package CSWpy-libmagic: MISSING ==> Verifying installed package CSWpy-progressbar: MISSING ==> Verifying installed package CSWcoreutils: MISSING Thanks in advance cheers W. -- William http://www.wbonnet.net http://www.sunwizard.net Le site fran?ais des amateurs de stations Unix http://www.opencsw.org Community SoftWare for Solaris http://www.guses.org French speaking Solaris User Group From william at wbonnet.net Sun Jul 4 15:02:14 2010 From: william at wbonnet.net (William Bonnet) Date: Sun, 04 Jul 2010 15:02:14 +0200 Subject: [csw-buildfarm] Package installation request Message-ID: <4C308656.5090207@wbonnet.net> Hi could you please install CSWgfile on current10x thanks in advance cheers W. -- William http://www.wbonnet.net http://www.sunwizard.net Le site fran?ais des amateurs de stations Unix http://www.opencsw.org Community SoftWare for Solaris http://www.guses.org French speaking Solaris User Group From bwalton at opencsw.org Sun Jul 4 16:35:03 2010 From: bwalton at opencsw.org (Ben Walton) Date: Sun, 04 Jul 2010 10:35:03 -0400 Subject: [csw-buildfarm] Package installation request In-Reply-To: <4C308656.5090207@wbonnet.net> References: <4C308656.5090207@wbonnet.net> Message-ID: <1278254078-sup-3356@pinkfloyd.chass.utoronto.ca> Excerpts from William Bonnet's message of Sun Jul 04 09:02:14 -0400 2010: > could you please install CSWgfile on current10x Doing this now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at artsci.utoronto.ca Sun Jul 4 02:34:40 2010 From: bwalton at artsci.utoronto.ca (Ben Walton) Date: Sat, 03 Jul 2010 20:34:40 -0400 Subject: [csw-buildfarm] Package installation request In-Reply-To: <4C2FB0FB.30801@wbonnet.net> References: <4C2FB0FB.30801@wbonnet.net> Message-ID: <1278203668-sup-5072@pinkfloyd.chass.utoronto.ca> Excerpts from William Bonnet's message of Sat Jul 03 17:51:55 -0400 2010: > could you please install the following packages on testing10x Doing this now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From phil at bolthole.com Fri Jul 9 22:56:10 2010 From: phil at bolthole.com (Philip Brown) Date: Fri, 9 Jul 2010 13:56:10 -0700 Subject: [csw-buildfarm] mesalibs Message-ID: Please update mesalibs on build farm. i'm waiting on an update for xscreensaver. From bwalton at opencsw.org Sat Jul 10 01:39:57 2010 From: bwalton at opencsw.org (Ben Walton) Date: Fri, 09 Jul 2010 19:39:57 -0400 Subject: [csw-buildfarm] mesalibs In-Reply-To: References: Message-ID: <1278718788-sup-8183@pinkfloyd.chass.utoronto.ca> Excerpts from Philip Brown's message of Fri Jul 09 16:56:10 -0400 2010: > Please update mesalibs on build farm. i'm waiting on an update for > xscreensaver. Doing this now. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at opencsw.org Sat Jul 10 01:46:44 2010 From: bwalton at opencsw.org (Ben Walton) Date: Fri, 09 Jul 2010 19:46:44 -0400 Subject: [csw-buildfarm] mesalibs In-Reply-To: References: Message-ID: <1278719166-sup-5637@pinkfloyd.chass.utoronto.ca> Excerpts from Philip Brown's message of Fri Jul 09 16:56:10 -0400 2010: > Please update mesalibs on build farm. i'm waiting on an update for > xscreensaver. Hasn't hit the buildfarm mirror yet. I'll retry later tonight and again tomorrow morning if required: --snip-- Package CSWmesalibs not in catalog. Exiting. --snip-- Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From phil at bolthole.com Sat Jul 10 01:57:29 2010 From: phil at bolthole.com (Philip Brown) Date: Fri, 9 Jul 2010 16:57:29 -0700 Subject: [csw-buildfarm] mesalibs In-Reply-To: <1278719166-sup-5637@pinkfloyd.chass.utoronto.ca> References: <1278719166-sup-5637@pinkfloyd.chass.utoronto.ca> Message-ID: err.. its CSWmesa On 7/9/10, Ben Walton wrote: > Excerpts from Philip Brown's message of Fri Jul 09 16:56:10 -0400 2010: > >> Please update mesalibs on build farm. i'm waiting on an update for >> xscreensaver. > > Hasn't hit the buildfarm mirror yet. I'll retry later tonight and > again tomorrow morning if required: > > --snip-- > Package CSWmesalibs not in catalog. Exiting. > --snip-- > > Thanks > -Ben > > -- > Ben Walton > Systems Programmer - CHASS > University of Toronto > C:416.407.5610 | W:416.978.4302 > > From bwalton at opencsw.org Sat Jul 10 02:07:11 2010 From: bwalton at opencsw.org (Ben Walton) Date: Fri, 09 Jul 2010 20:07:11 -0400 Subject: [csw-buildfarm] mesalibs In-Reply-To: References: <1278719166-sup-5637@pinkfloyd.chass.utoronto.ca> Message-ID: <1278720407-sup-4288@pinkfloyd.chass.utoronto.ca> Excerpts from Philip Brown's message of Fri Jul 09 19:57:29 -0400 2010: > err.. its CSWmesa Yes, sorry. Still hasn't landed though: CURRENT packages: CSWcommon-1.4.7,REV=2009.09.20 CSWmesa-7.6.1,REV=2010.04.30 Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at opencsw.org Sat Jul 10 04:10:25 2010 From: bwalton at opencsw.org (Ben Walton) Date: Fri, 09 Jul 2010 22:10:25 -0400 Subject: [csw-buildfarm] running mkheaders for gcc4 Message-ID: <1278727782-sup-6502@pinkfloyd.chass.utoronto.ca> I'm about to run gcc4's included (news to me) mkheaders. I _think_ this will get us over the hump for building things that were broken with sol9. Stay tuned. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From phil at bolthole.com Sat Jul 10 19:33:42 2010 From: phil at bolthole.com (Philip Brown) Date: Sat, 10 Jul 2010 10:33:42 -0700 Subject: [csw-buildfarm] mesalibs Message-ID: <20100710173342.GA86009@bolthole.com> weeell.. it's morning... :-} From bwalton at opencsw.org Sat Jul 10 20:22:23 2010 From: bwalton at opencsw.org (Ben Walton) Date: Sat, 10 Jul 2010 14:22:23 -0400 Subject: [csw-buildfarm] mesalibs In-Reply-To: <20100710173342.GA86009@bolthole.com> References: <20100710173342.GA86009@bolthole.com> Message-ID: <1278786104-sup-2311@pinkfloyd.chass.utoronto.ca> Excerpts from Philip Brown's message of Sat Jul 10 13:33:42 -0400 2010: > weeell.. it's morning... :-} In flight. Forgot about soccer with the kids this morning. :) Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From phil at bolthole.com Sun Jul 11 02:55:52 2010 From: phil at bolthole.com (Philip Brown) Date: Sat, 10 Jul 2010 17:55:52 -0700 Subject: [csw-buildfarm] more x86 problems Message-ID: <20100711005552.GA84302@bolthole.com> erm.. on current9x: cc -c -I. -I.. -D_REENTRANT -D_PTHREADS -D_POSIX_PTHREAD_SEMANTICS -DXTHREADS -DXUSE_MTSAFE_API -I/opt/csw/include/gtk-2.0 -I/opt/csw/lib/gtk-2.0/include -I/opt/csw/include/atk-1.0 -I/opt/csw/include/cairo -I/opt/csw/include/pango-1.0 -I/opt/csw/include/glib-2.0 -I/opt/csw/lib/glib-2.0/include -I/opt/csw/include/pixman-1 -I/opt/csw/include/freetype2 -I/opt/csw/include -I/opt/csw/include/libpng12 -I/opt/csw/include/libxml2 -I/opt/csw/include/libglade-2.0 -D_REENTRANT -D_PTHREADS -I/opt/csw/include/gtk-2.0 -I/opt/csw/include/glib-2.0 -I/opt/csw/lib/glib-2.0/include -I/opt/csw/include -DHAVE_CONFIG_H -mt -xnorunpath -xO3 -xarch=386 -I/usr/openwin/include -I/usr/dt/include resources.c semop(1): encountered an error: No space left on device From phil at bolthole.com Sun Jul 11 16:55:55 2010 From: phil at bolthole.com (Philip Brown) Date: Sun, 11 Jul 2010 07:55:55 -0700 Subject: [csw-buildfarm] more x86 problems Message-ID: <20100711145555.GA78779@bolthole.com> Hmm. that wierd error seems to have cleared up now From bonivart at opencsw.org Mon Jul 12 16:28:33 2010 From: bonivart at opencsw.org (Peter Bonivart) Date: Mon, 12 Jul 2010 16:28:33 +0200 Subject: [csw-buildfarm] Please install CSWlibspf2 on build9x, build9s, build10x and build10s Message-ID: Thank you. -- /peter From phil at bolthole.com Mon Jul 12 18:02:32 2010 From: phil at bolthole.com (Philip Brown) Date: Mon, 12 Jul 2010 09:02:32 -0700 Subject: [csw-buildfarm] updates for gnome libs Message-ID: Hi farm folks, oopsie.. i forgot I had some pending gnome related libraries unreleased. Please update buildfarm with my recent updates, such as libgnomecanvas, etc. William, I'm cc'ing you just in case you you got some complaints about old libraries when building things. they may go away after this. From bwalton at opencsw.org Tue Jul 13 02:11:14 2010 From: bwalton at opencsw.org (Ben Walton) Date: Mon, 12 Jul 2010 20:11:14 -0400 Subject: [csw-buildfarm] Please install CSWlibspf2 on build9x, build9s, build10x and build10s In-Reply-To: References: Message-ID: <1278979861-sup-2725@pinkfloyd.chass.utoronto.ca> Excerpts from Peter Bonivart's message of Mon Jul 12 10:28:33 -0400 2010: > Thank you. Doing this now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at opencsw.org Tue Jul 13 02:15:28 2010 From: bwalton at opencsw.org (Ben Walton) Date: Mon, 12 Jul 2010 20:15:28 -0400 Subject: [csw-buildfarm] updates for gnome libs In-Reply-To: References: Message-ID: <1278980107-sup-7682@pinkfloyd.chass.utoronto.ca> Excerpts from Philip Brown's message of Mon Jul 12 12:02:32 -0400 2010: > oopsie.. i forgot I had some pending gnome related libraries > unreleased. Please update buildfarm with my recent updates, such as > libgnomecanvas, etc. Bzzt. Full list please. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From rupert at opencsw.org Sat Jul 17 21:52:13 2010 From: rupert at opencsw.org (rupert THURNER) Date: Sat, 17 Jul 2010 21:52:13 +0200 Subject: [csw-buildfarm] apr_util install pls Message-ID: hi, could you please instlal apr_util on the buildfarm? rupert From bwalton at opencsw.org Sun Jul 18 05:07:39 2010 From: bwalton at opencsw.org (Ben Walton) Date: Sat, 17 Jul 2010 23:07:39 -0400 Subject: [csw-buildfarm] apr_util install pls In-Reply-To: References: Message-ID: <1279422448-sup-9134@pinkfloyd.chass.utoronto.ca> Excerpts from rupert THURNER's message of Sat Jul 17 15:52:13 -0400 2010: > hi, could you please instlal apr_util on the buildfarm? In flight now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From mij at sshguard.net Sat Jul 17 11:25:59 2010 From: mij at sshguard.net (Mij) Date: Sat, 17 Jul 2010 11:25:59 +0200 Subject: [csw-buildfarm] access to buildfarm for SSHGuard Message-ID: Hello, At SSHGuard (www.sshguard.net) we are having periodic reports from Solaris users having build problems. We'd like to avoid back-and-forth exchanges for these and ensure support for Solaris upstream. However Solaris is currently the only platform we don't have hands-on access to. So buildfarm looks like it! Would you mind offering me access to that? thanks michele From dam at opencsw.org Sun Jul 18 23:53:14 2010 From: dam at opencsw.org (Dagobert Michelsen) Date: Sun, 18 Jul 2010 23:53:14 +0200 Subject: [csw-buildfarm] access to buildfarm for SSHGuard In-Reply-To: References: Message-ID: <7E46D39D-1A8C-4707-8E44-7556C842C0C2@opencsw.org> Hi, Am 17.07.2010 um 11:25 schrieb Mij : > Hello, > > At SSHGuard (www.sshguard.net) we are having periodic reports from > Solaris users having build problems. We'd like to avoid back-and-forth > exchanges for these and ensure support for Solaris upstream. However > Solaris is currently the only platform we don't have hands-on access to. > So buildfarm looks like it! > > Would you mind offering me access to that? Sure. I'm on vacation with just my phone right now. I'd be happy to set up an account for you when I get back in a week. You can already send me your ssh public key and intended username. Best regards -- Dago > > thanks > michele > > _______________________________________________ > buildfarm mailing list > buildfarm at lists.opencsw.org > https://lists.opencsw.org/mailman/listinfo/buildfarm From rupert at opencsw.org Thu Jul 22 16:42:05 2010 From: rupert at opencsw.org (rupert THURNER) Date: Thu, 22 Jul 2010 16:42:05 +0200 Subject: [csw-buildfarm] [csw-maintainers] BerkeleyDB upgrade In-Reply-To: <89934547-D626-4CBA-92EC-F816834AE55E@opencsw.org> References: <4C32281F-89A3-4B57-B840-699CA6795EDB@opencsw.org> <47B9E89A-9C18-442E-958F-7AF486387A7D@opencsw.org> <515B314C-A719-498C-8861-DF71A52E513B@opencsw.org> <28D3717A-89F4-4FF7-9C25-FEAC80002BB7@opencsw.org> <89934547-D626-4CBA-92EC-F816834AE55E@opencsw.org> Message-ID: On Mon, Jun 7, 2010 at 10:17, Dagobert Michelsen wrote: > Hi Rupert, > > Am 06.06.2010 um 07:22 schrieb rupert THURNER: >> >> which machine should i use for sparc, as >> >> rupert at current9s:~ >> $ ls -l /opt/csw/lib/sparcv9/libdb-4.7.so >> lrwxrwxrwx ? ?1 root ? ? other ? ? ? ? ?36 Oct 19 ?2009 >> /opt/csw/lib/sparcv9/libdb-4.7.so -> >> ../../bdb47/lib/sparcv9/libdb-4.7.so >> >> rupert at current9s:~ >> $ date >> Sun Jun ?6 00:20:21 CDT 2010 > > Umh, I am pretty sure I removed it from the machine. I have again removed > it, maybe a package upgrade of something triggered the reinstall?? as apr-util does not support bdb-4.8 i tried to compile it with bdb-4.7. there i got the following error: RUNTIME_DEP_PKGS_CSWapr-util += CSWbdb Applying the overrides and analyzing the results. If any of the reported errors were false positives, you can override them pasting the lines below to the GAR recipe. CHECKPKG_OVERRIDES_CSWapr-util += deprecated-library|opt/csw/lib/apr-util-1/apr_dbm_db-1.so|Deprecated|Berkeley|DB|location|/opt/csw/lib/libdb-4.7.so CHECKPKG_OVERRIDES_CSWapr-util += deprecated-library|opt/csw/lib/apr-util-1/apr_dbm_db-1.so|Deprecated|Berkeley|DB|location|/opt/csw/lib/libdb-4.7.so CHECKPKG_OVERRIDES_CSWapr-util += missing-dependency|CSWbdb CHECKPKG_OVERRIDES_CSWapr-util += surplus-dependency|CSWbdb47 Please note that checkpkg isn't suggesting you should simply add these overrides do the Makefile. It only informs what the overrides could look like. You need to understand what are the reported issues about and use your best judgement to decide whether to fix the underlying problems or override them. For more information, scroll up and read the detailed messages. ERROR: Modular checks are reporting errors. would it be possible to remove bdb from the buildfarm, so new packages use the correct lib when built? kr rupert From dam at opencsw.org Thu Jul 22 16:48:30 2010 From: dam at opencsw.org (Dagobert Michelsen) Date: Thu, 22 Jul 2010 16:48:30 +0200 Subject: [csw-buildfarm] [csw-maintainers] BerkeleyDB upgrade In-Reply-To: References: <4C32281F-89A3-4B57-B840-699CA6795EDB@opencsw.org> <47B9E89A-9C18-442E-958F-7AF486387A7D@opencsw.org> <515B314C-A719-498C-8861-DF71A52E513B@opencsw.org> <28D3717A-89F4-4FF7-9C25-FEAC80002BB7@opencsw.org> <89934547-D626-4CBA-92EC-F816834AE55E@opencsw.org> Message-ID: Hi Rupert, Am 22.07.2010 um 16:42 schrieb rupert THURNER: > On Mon, Jun 7, 2010 at 10:17, Dagobert Michelsen > wrote: >> Hi Rupert, >> >> Am 06.06.2010 um 07:22 schrieb rupert THURNER: >>> >>> which machine should i use for sparc, as >>> >>> rupert at current9s:~ >>> $ ls -l /opt/csw/lib/sparcv9/libdb-4.7.so >>> lrwxrwxrwx 1 root other 36 Oct 19 2009 >>> /opt/csw/lib/sparcv9/libdb-4.7.so -> >>> ../../bdb47/lib/sparcv9/libdb-4.7.so >>> >>> rupert at current9s:~ >>> $ date >>> Sun Jun 6 00:20:21 CDT 2010 >> >> Umh, I am pretty sure I removed it from the machine. I have again >> removed >> it, maybe a package upgrade of something triggered the reinstall?? > > as apr-util does not support bdb-4.8 i tried to compile it with > bdb-4.7. there i got the following error: > > RUNTIME_DEP_PKGS_CSWapr-util += CSWbdb > Applying the overrides and analyzing the results. > If any of the reported errors were false positives, you can override > them > pasting the lines below to the GAR recipe. > CHECKPKG_OVERRIDES_CSWapr-util += > deprecated-library|opt/csw/lib/apr-util-1/apr_dbm_db-1.so|Deprecated| > Berkeley|DB|location|/opt/csw/lib/libdb-4.7.so > CHECKPKG_OVERRIDES_CSWapr-util += > deprecated-library|opt/csw/lib/apr-util-1/apr_dbm_db-1.so|Deprecated| > Berkeley|DB|location|/opt/csw/lib/libdb-4.7.so > CHECKPKG_OVERRIDES_CSWapr-util += missing-dependency|CSWbdb > CHECKPKG_OVERRIDES_CSWapr-util += surplus-dependency|CSWbdb47 > Please note that checkpkg isn't suggesting you should simply add > these overrides > do the Makefile. It only informs what the overrides could look > like. You need > to understand what are the reported issues about and use your best > judgement to > decide whether to fix the underlying problems or override them. For > more > information, scroll up and read the detailed messages. > ERROR: Modular checks are reporting errors. Ideally applications should runtime-link against /opt/csw/bdb47/ first. GAR does EXTRA_LIB first this way, so it must be some kind of inconsistency in the upstream Makefile prepending /opt/csw/lib. > would it be possible to remove bdb from the buildfarm, so new packages > use the correct lib when built? I don't know, there may be packages depending on it. The dependency listing on http://www.opencsw.org/packages/CSWbdb/ is not that exact. Maybe Maciej has a more accurate information about packages linking to /opt/csw/lib/libdb-4.7.so Best regards -- Dago From maciej at opencsw.org Thu Jul 22 19:22:19 2010 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Thu, 22 Jul 2010 18:22:19 +0100 Subject: [csw-buildfarm] [csw-maintainers] BerkeleyDB upgrade In-Reply-To: References: <4C32281F-89A3-4B57-B840-699CA6795EDB@opencsw.org> <47B9E89A-9C18-442E-958F-7AF486387A7D@opencsw.org> <515B314C-A719-498C-8861-DF71A52E513B@opencsw.org> <28D3717A-89F4-4FF7-9C25-FEAC80002BB7@opencsw.org> <89934547-D626-4CBA-92EC-F816834AE55E@opencsw.org> Message-ID: No dia 22 de Julho de 2010 15:48, Dagobert Michelsen escreveu: >> would it be possible to remove bdb from the buildfarm, so new packages >> use the correct lib when built? > > I don't know, there may be packages depending on it. The dependency listing > on > ?http://www.opencsw.org/packages/CSWbdb/ > is not that exact. Maybe Maciej has a more accurate information about > packages > linking to /opt/csw/lib/libdb-4.7.so I don't have yet code to create such report, I'm not that far away from it either. It's a little fiddly to do, because there might be binaries that have both /opt/csw/lib and /opt/csw/bdb47/lib in the rpath. The result is that during runtime the binary reads from the /opt/csw/lib path but doesn't depend on it in the sense that it would happily read from /opt/csw/bdb47/lib if the library from /opt/csw/lib was gone. Overall, working out these dependencies is a worthwhile goal, with many potential uses. From bonivart at opencsw.org Sun Jul 25 21:55:13 2010 From: bonivart at opencsw.org (Peter Bonivart) Date: Sun, 25 Jul 2010 21:55:13 +0200 Subject: [csw-buildfarm] Missing packages on Solaris 8 Message-ID: Please install the missing packages needed to use GAR on current8x and current8s. ==> Verifying installed package CSWxz: ok ==> Verifying installed package CSWbzip2: ok ==> Verifying installed package CSWdiffutils: ok ==> Verifying installed package CSWfindutils: ok ==> Verifying installed package CSWgawk: ok ==> Verifying installed package CSWgfile: ok ==> Verifying installed package CSWggrep: ok ==> Verifying installed package CSWgmake: ok ==> Verifying installed package CSWgsed: ok ==> Verifying installed package CSWgtar: ok ==> Verifying installed package CSWpy-cheetah: ok ==> Verifying installed package CSWpy-hachoir-core: ok ==> Verifying installed package CSWpy-hachoir-parser: MISSING ==> Verifying installed package CSWpy-libmagic: MISSING ==> Verifying installed package CSWpy-progressbar: ok ==> Verifying installed package CSWpy-sqlobject: MISSING ==> Verifying installed package CSWpy-yaml: ok ==> Verifying installed package CSWpython: ok ==> Verifying installed package CSWcoreutils: MISSING ==> Verifying installed package CSWwget: ok ==> Verifying installed package CSWgit: ok -- /peter From dam at opencsw.org Sun Jul 25 22:16:51 2010 From: dam at opencsw.org (Dagobert Michelsen) Date: Sun, 25 Jul 2010 22:16:51 +0200 Subject: [csw-buildfarm] Missing packages on Solaris 8 In-Reply-To: References: Message-ID: Hi Peter, Am 25.07.2010 um 21:55 schrieb Peter Bonivart : > Please install the missing packages needed to use GAR on current8x and > current8s. > > ==> Verifying installed package CSWxz: ok > ==> Verifying installed package CSWbzip2: ok > ==> Verifying installed package CSWdiffutils: ok > ==> Verifying installed package CSWfindutils: ok > ==> Verifying installed package CSWgawk: ok > ==> Verifying installed package CSWgfile: ok > ==> Verifying installed package CSWggrep: ok > ==> Verifying installed package CSWgmake: ok > ==> Verifying installed package CSWgsed: ok > ==> Verifying installed package CSWgtar: ok > ==> Verifying installed package CSWpy-cheetah: ok > ==> Verifying installed package CSWpy-hachoir-core: ok > ==> Verifying installed package CSWpy-hachoir-parser: MISSING > ==> Verifying installed package CSWpy-libmagic: MISSING > ==> Verifying installed package CSWpy-progressbar: ok > ==> Verifying installed package CSWpy-sqlobject: MISSING > ==> Verifying installed package CSWpy-yaml: ok > ==> Verifying installed package CSWpython: ok > ==> Verifying installed package CSWcoreutils: MISSING > ==> Verifying installed package CSWwget: ok > ==> Verifying installed package CSWgit: ok I would, but we don't have them as the build level has been raised to Solaris 9. You must use an older gar for Solaris 8. Best regards -- Dago From bonivart at opencsw.org Sun Jul 25 23:09:35 2010 From: bonivart at opencsw.org (Peter Bonivart) Date: Sun, 25 Jul 2010 23:09:35 +0200 Subject: [csw-buildfarm] Missing packages on Solaris 8 In-Reply-To: References: Message-ID: On Sun, Jul 25, 2010 at 10:16 PM, Dagobert Michelsen wrote: > I would, but we don't have them as the build level has been raised to Solaris 9. You must use an older gar for Solaris 8. How do I do this? -- /peter From dam at opencsw.org Mon Jul 26 10:48:47 2010 From: dam at opencsw.org (Dagobert Michelsen) Date: Mon, 26 Jul 2010 10:48:47 +0200 Subject: [csw-buildfarm] Missing packages on Solaris 8 In-Reply-To: References: Message-ID: <006AFE35-934B-4D80-A02E-D93B58B83B7B@opencsw.org> Hi Peter, Am 25.07.2010 um 23:09 schrieb Peter Bonivart: > On Sun, Jul 25, 2010 at 10:16 PM, Dagobert Michelsen > wrote: >> I would, but we don't have them as the build level has been raised >> to Solaris 9. You must use an older gar for Solaris 8. > > How do I do this? You would need to check out a specific version of GAR with something like svn co https://gar.svn.sf.net/svnroot/gar/csw/mgar/gar/v2 at 9500 at your package GAR location. But what do you want to package for Solaris 8? If this is a general requirement we may adjust GAR to use the older framework even in the new GAR. Best regards -- Dago From bonivart at opencsw.org Mon Jul 26 11:28:12 2010 From: bonivart at opencsw.org (Peter Bonivart) Date: Mon, 26 Jul 2010 11:28:12 +0200 Subject: [csw-buildfarm] Missing packages on Solaris 8 In-Reply-To: <006AFE35-934B-4D80-A02E-D93B58B83B7B@opencsw.org> References: <006AFE35-934B-4D80-A02E-D93B58B83B7B@opencsw.org> Message-ID: On Mon, Jul 26, 2010 at 10:48 AM, Dagobert Michelsen wrote: > Hi Peter, > > Am 25.07.2010 um 23:09 schrieb Peter Bonivart: >> >> On Sun, Jul 25, 2010 at 10:16 PM, Dagobert Michelsen >> wrote: >>> >>> I would, but we don't have them as the build level has been raised to >>> Solaris 9. You must use an older gar for Solaris 8. >> >> How do I do this? > > You would need to check out a specific version of GAR with something like > ?svn co https://gar.svn.sf.net/svnroot/gar/csw/mgar/gar/v2 at 9500 > at your package GAR location. But what do you want to package for Solaris 8? > If this is a general requirement we may adjust GAR to use the older > framework > even in the new GAR. It's pkgutil, I still want it to be easily available for Solaris 8. It's the only package of mine where I have an interest in Solaris 8 so no need for my sake to change anything. I used the command above to get a v2 dir, removed my gar dir and renamed v2 to gar and it worked. Thanks! -- /peter From rupert at opencsw.org Mon Jul 26 19:19:45 2010 From: rupert at opencsw.org (rupert THURNER) Date: Mon, 26 Jul 2010 19:19:45 +0200 Subject: [csw-buildfarm] Fwd: [csw-pkgsubmissions] newpkgs apr_util In-Reply-To: <201007261710.o6QHAaDm000320@login.bo.opencsw.org> References: <201007261710.o6QHAaDm000320@login.bo.opencsw.org> Message-ID: could you please install this package on the buildserver as well so we can try to build a new version of apache2? rupert. ---------- Forwarded message ---------- From: THURNER Rupert Date: Mon, Jul 26, 2010 at 19:10 Subject: [csw-pkgsubmissions] newpkgs apr_util To: pkgsubmissions at lists.opencsw.org * apr_util: revision upgrade ?- from: 2010.06.19 ?- ? to: 2010.07.26 ?+ apr_util-1.3.9,REV=2010.07.26-SunOS5.9-sparc-CSW.pkg.gz ?+ apr_util-1.3.9,REV=2010.07.26-SunOS5.9-i386-CSW.pkg.gz -- Generated by submitpkg _______________________________________________ pkgsubmissions mailing list pkgsubmissions at lists.opencsw.org https://lists.opencsw.org/mailman/listinfo/pkgsubmissions From maciej at opencsw.org Mon Jul 26 23:38:59 2010 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Mon, 26 Jul 2010 22:38:59 +0100 Subject: [csw-buildfarm] autoconf-2.66 is broken Message-ID: Trying to build MySQL-5.1: ==> Running make in work/solaris9-i386/build-isa-i386/mysql-5.1.49 prefix="/opt/csw" exec_prefix="/opt/csw" bindir="/opt/csw/libexec/mysql/5.1/bin" sbindir="/opt/csw/sbin/mysql/5.1" libexecdir="/opt/csw/libexec/mysql/5.1" datadir="/opt/csw/share/mysql/5.1" sysc r="/opt/csw/lib/mysql/5.1" infodir="/opt/csw/share/mysql/5.1/info" lispdir="/opt/csw/share/mysql/5.1/emacs/site-lisp" includedir="/opt/csw/include/mysql/5.1" mandir="/opt/csw/share/mysql/5.1/man lude/mysql/5.1" CFLAGS="-xO3 -m32 -xarch=386 -xnorunpath -mt -D_POSIX_C_SOURCE=199506L -D__EXTENSIONS__" CXXFLAGS="-xO3 -m32 -xarch=386 -norunpath -mt -D_POSIX_C_SOURCE=199506L -D__EXTENSIONS__" -m32 -xarch=386 -xnorunpath" CC="/opt/studio/SOS12/SUNWspro/bin/cc" CXX="/opt/studio/SOS12/SUNWspro/bin/CC" CC_HOME="/opt/studio/SOS12/SUNWspro" CC_VERSION="Sun C 5.9 SunOS_i386 Patch 124868-13 ysql-5.1.x-optcsw" LD_OPTIONS="-R/opt/csw/lib/\$ISALIST -R/opt/csw/lib/\$ISALIST -R/opt/csw/lib -R/opt/csw/lib/mysql/5.1/\$ISALIST -R/opt/csw/lib/mysql/5.1 -R/opt/csw/lib/\$ISALIST -R/opt/csw/li ql-5.1.49 gmake[2]: Entering directory `/home/maciej/src/opencsw/pkg/mysql5/branches/mysql-5.1.x-optcsw/work/solaris9-i386/build-isa-i386/mysql-5.1.49' cd . && /bin/bash /home/maciej/src/opencsw/pkg/mysql5/branches/mysql-5.1.x-optcsw/work/solaris9-i386/build-isa-i386/mysql-5.1.49/missing --run aclocal-1.10 /opt/csw/share/aclocal/xmms.m4:17: warning: underquoted definition of XMMS_TEST_VERSION /opt/csw/share/aclocal/xmms.m4:17: run info '(automake)Extending aclocal' /opt/csw/share/aclocal/xmms.m4:17: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal configure.in:1929: error: AC_CHECK_SIZEOF: requires literal arguments ../../lib/autoconf/types.m4:765: AC_CHECK_SIZEOF is expanded from... configure.in:1929: the top level autom4te: /opt/csw/bin/gm4 failed with exit status: 1 aclocal-1.10: autom4te failed with exit status: 1 gmake[2]: *** [aclocal.m4] Error 1 gmake[2]: Leaving directory `/home/maciej/src/opencsw/pkg/mysql5/branches/mysql-5.1.x-optcsw/work/solaris9-i386/build-isa-i386/mysql-5.1.49' gmake[1]: *** [build-work/solaris9-i386/build-isa-i386/mysql-5.1.49/Makefile] Error 2 gmake[1]: Leaving directory `/home/maciej/src/opencsw/pkg/mysql5/branches/mysql-5.1.x-optcsw' gmake: *** [merge-isa-i386] Error 2 Searching the Internets(TM) reveals that there are multiple complaints about this problem in autoconf-2.66. Dago has committed a patch for autoconf: http://sourceforge.net/apps/trac/gar/changeset/10581 Would it be possible to fix it by hand on current9x? Maciej From bwalton at opencsw.org Tue Jul 27 03:07:31 2010 From: bwalton at opencsw.org (Ben Walton) Date: Mon, 26 Jul 2010 21:07:31 -0400 Subject: [csw-buildfarm] autoconf-2.66 is broken In-Reply-To: References: Message-ID: <1280192818-sup-4063@pinkfloyd.chass.utoronto.ca> Excerpts from Maciej (Matchek) Blizinski's message of Mon Jul 26 17:38:59 -0400 2010: Hi Maciej, > Would it be possible to fix it by hand on current9x? Before I do this, can you clarify why you want the manual edit on only one system? Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From maciej at opencsw.org Tue Jul 27 08:11:27 2010 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Tue, 27 Jul 2010 07:11:27 +0100 Subject: [csw-buildfarm] Remove xmms from the buildfarm Message-ID: xmms is generating annoying messages during all autotools bootstraps: cd . && /bin/bash /home/maciej/src/opencsw/pkg/mysql5/branches/mysql-5.1.x-optcsw/work/solaris9-i386/build-isa-i386/mysql-5.1.49/missing --run aclocal-1.10 /opt/csw/share/aclocal/xmms.m4:17: warning: underquoted definition of XMMS_TEST_VERSION /opt/csw/share/aclocal/xmms.m4:17: run info '(automake)Extending aclocal' /opt/csw/share/aclocal/xmms.m4:17: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal I've filed a bug, but it's still not addressed: https://www.opencsw.org/mantis/view.php?id=4095 Can we remove the xmms package from the buildfarm? From maciej at opencsw.org Tue Jul 27 08:14:06 2010 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Tue, 27 Jul 2010 07:14:06 +0100 Subject: [csw-buildfarm] autoconf-2.66 is broken In-Reply-To: <1280192818-sup-4063@pinkfloyd.chass.utoronto.ca> References: <1280192818-sup-4063@pinkfloyd.chass.utoronto.ca> Message-ID: No dia 27 de Julho de 2010 02:07, Ben Walton escreveu: > Excerpts from Maciej (Matchek) Blizinski's message of Mon Jul 26 17:38:59 -0400 2010: > > Hi Maciej, > >> Would it be possible to fix it by hand on current9x? > > Before I do this, can you clarify why you want the manual edit on only > one system? A user asked for an experimental amd64 build of MySQL-5.1, so I only need one box. Hm, maybe I can just use testing9x for this purpose. MySQL seems to be building there. From bwalton at opencsw.org Wed Jul 28 02:51:36 2010 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 27 Jul 2010 20:51:36 -0400 Subject: [csw-buildfarm] Fwd: [csw-pkgsubmissions] newpkgs apr_util In-Reply-To: References: <201007261710.o6QHAaDm000320@login.bo.opencsw.org> Message-ID: <1280278287-sup-1476@pinkfloyd.chass.utoronto.ca> Excerpts from rupert THURNER's message of Mon Jul 26 13:19:45 -0400 2010: > could you please install this package on the buildserver as well so we > can try to build a new version of apache2? Doing this now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at opencsw.org Wed Jul 28 02:52:56 2010 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 27 Jul 2010 20:52:56 -0400 Subject: [csw-buildfarm] Fwd: [csw-pkgsubmissions] newpkgs apr_util In-Reply-To: References: <201007261710.o6QHAaDm000320@login.bo.opencsw.org> Message-ID: <1280278358-sup-2843@pinkfloyd.chass.utoronto.ca> Excerpts from rupert THURNER's message of Mon Jul 26 13:19:45 -0400 2010: > could you please install this package on the buildserver as well so we > can try to build a new version of apache2? ...hasn't hit the mirrors yet. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at opencsw.org Wed Jul 28 02:53:22 2010 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 27 Jul 2010 20:53:22 -0400 Subject: [csw-buildfarm] Remove xmms from the buildfarm In-Reply-To: References: Message-ID: <1280278382-sup-8290@pinkfloyd.chass.utoronto.ca> Excerpts from Maciej (Matchek) Blizinski's message of Tue Jul 27 02:11:27 -0400 2010: > Can we remove the xmms package from the buildfarm? Doing this now... -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at opencsw.org Wed Jul 28 03:01:31 2010 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 27 Jul 2010 21:01:31 -0400 Subject: [csw-buildfarm] Remove xmms from the buildfarm In-Reply-To: References: Message-ID: <1280278827-sup-1945@pinkfloyd.chass.utoronto.ca> Excerpts from Maciej (Matchek) Blizinski's message of Tue Jul 27 02:11:27 -0400 2010: > Can we remove the xmms package from the buildfarm? It's now removed, but this left a dangling dependency. CSWfaad2 depends on xmms which I found strange. Then I looked at the file list delivered. faad2 is dropping in: /opt/csw/lib/xmms /opt/csw/lib/xmms/Input /opt/csw/lib/xmms/Input/libmp4.a /opt/csw/lib/xmms/Input/libmp4.la /opt/csw/lib/xmms/Input/libmp4.so This should have been shipped as a separate faad2-xmms package. I'm not going to worry about this. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From dam at opencsw.org Wed Jul 28 09:28:14 2010 From: dam at opencsw.org (Dagobert Michelsen) Date: Wed, 28 Jul 2010 09:28:14 +0200 Subject: [csw-buildfarm] Fwd: [csw-pkgsubmissions] newpkgs apr_util In-Reply-To: <1280278358-sup-2843@pinkfloyd.chass.utoronto.ca> References: <201007261710.o6QHAaDm000320@login.bo.opencsw.org> <1280278358-sup-2843@pinkfloyd.chass.utoronto.ca> Message-ID: <6CE0608A-4740-4BB8-9FCB-9C2C9367745E@opencsw.org> Hi Rupert, Am 28.07.2010 um 02:52 schrieb Ben Walton: > Excerpts from rupert THURNER's message of Mon Jul 26 13:19:45 -0400 > 2010: >> could you please install this package on the buildserver as well so >> we >> can try to build a new version of apache2? > > ...hasn't hit the mirrors yet. It has now :-) Done. Best regards -- Dago From dam at opencsw.org Wed Jul 28 11:03:30 2010 From: dam at opencsw.org (Dagobert Michelsen) Date: Wed, 28 Jul 2010 11:03:30 +0200 Subject: [csw-buildfarm] Remove xmms from the buildfarm In-Reply-To: <1280278827-sup-1945@pinkfloyd.chass.utoronto.ca> References: <1280278827-sup-1945@pinkfloyd.chass.utoronto.ca> Message-ID: <6AEEFE57-D3C7-4EDD-AAE6-D332D7C9D798@opencsw.org> Hi, Am 28.07.2010 um 03:01 schrieb Ben Walton: > Excerpts from Maciej (Matchek) Blizinski's message of Tue Jul 27 > 02:11:27 -0400 2010: > >> Can we remove the xmms package from the buildfarm? > > It's now removed, but this left a dangling dependency. CSWfaad2 > depends on xmms which I found strange. Then I looked at the file list > delivered. faad2 is dropping in: > > /opt/csw/lib/xmms > /opt/csw/lib/xmms/Input > /opt/csw/lib/xmms/Input/libmp4.a > /opt/csw/lib/xmms/Input/libmp4.la > /opt/csw/lib/xmms/Input/libmp4.so > > This should have been shipped as a separate faad2-xmms package. I'm > not going to worry about this. I just reinstalled xmms to rebuild faad2 with xmms support and splitted packages. Please stand by. Best regards -- Dago From edwin at clamav.net Mon Jul 26 12:30:34 2010 From: edwin at clamav.net (=?UTF-8?B?VMO2csO2aw==?= Edwin) Date: Mon, 26 Jul 2010 10:30:34 -0000 Subject: [csw-buildfarm] what happened with libsigsegv.so.0? gawk is not working Message-ID: <20100726133026.79723f98@deb0> Hi, My buildbot failed this morning with this message: ld.so.1: gawk: fatal: libsigsegv.so.0: open failed: No such file or directory $ hostname current10s $ which gawk /opt/csw/bin/gawk $ gawk ld.so.1: gawk: fatal: libsigsegv.so.0: open failed: No such file or directory Killed $ ldd /opt/csw/bin/gawk ldd /opt/csw/bin/gawk libsigsegv.so.0 => (file not found) libintl.so.8 => /opt/csw/lib/libintl.so.8 libsocket.so.1 => /lib/libsocket.so.1 libnsl.so.1 => /lib/libnsl.so.1 libdl.so.1 => /lib/libdl.so.1 libm.so.1 => /lib/libm.so.1 libthread.so.1 => /lib/libthread.so.1 libc.so.1 => /lib/libc.so.1 libsec.so.1 => /lib/libsec.so.1 libiconv.so.2 => /opt/csw/lib/libiconv.so.2 libmp.so.2 => /lib/libmp.so.2 libmd.so.1 => /lib/libmd.so.1 libscf.so.1 => /lib/libscf.so.1 libavl.so.1 => /lib/libavl.so.1 libdoor.so.1 => /lib/libdoor.so.1 libuutil.so.1 => /lib/libuutil.so.1 libgen.so.1 => /lib/libgen.so.1 libm.so.2 => /lib/libm.so.2 /platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1 /platform/SUNW,SPARC-Enterprise-T5220/lib/libmd_psr.so.1 Best regards, --Edwin