From romeotheriault at opencsw.org  Wed Sep  5 04:28:51 2012
From: romeotheriault at opencsw.org (Romeo Theriault)
Date: Tue, 04 Sep 2012 16:28:51 -1000
Subject: [csw-buildfarm] Request for access to "testing" machines
Message-ID: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>

Hi, I'm not sure if this is the correct address to send this request to or
not, but if possible I'd like to request access to the following "testing"
machines:

  - testing9s
  - testing9x
  - testing10s
  - testing10x

My id on the buildfarm machines is 'romeotheriault'.

I'd like to test out the py_salt package I've built.

Thank you,
Romeo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120904/04c31504/attachment.html>

From romeotheriault at opencsw.org  Wed Sep  5 04:30:13 2012
From: romeotheriault at opencsw.org (Romeo Theriault)
Date: Tue, 04 Sep 2012 16:30:13 -1000
Subject: [csw-buildfarm] Request for access to "testing" machines
In-Reply-To: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>
References: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>
Message-ID: <CAHo7ehV=PJgPV+mjHF0+7eC+BdxVnn3s=D8Dj52DFFj6OZXZVg@mail.gmail.com>

I'd like to request root access so I can test installing and
starting/stopping it.

Romeo

On Tue, Sep 4, 2012 at 4:28 PM, Romeo Theriault
<romeotheriault at opencsw.org>wrote:

> Hi, I'm not sure if this is the correct address to send this request to or
> not, but if possible I'd like to request access to the following "testing"
> machines:
>
>   - testing9s
>   - testing9x
>   - testing10s
>   - testing10x
>
> My id on the buildfarm machines is 'romeotheriault'.
>
> I'd like to test out the py_salt package I've built.
>
> Thank you,
> Romeo
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120904/3b3a8af9/attachment.html>

From dam at opencsw.org  Wed Sep  5 12:14:38 2012
From: dam at opencsw.org (Dagobert Michelsen)
Date: Wed, 5 Sep 2012 12:14:38 +0200
Subject: [csw-buildfarm] Request for access to "testing" machines
In-Reply-To: <CAHo7ehV=PJgPV+mjHF0+7eC+BdxVnn3s=D8Dj52DFFj6OZXZVg@mail.gmail.com>
References: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>
	<CAHo7ehV=PJgPV+mjHF0+7eC+BdxVnn3s=D8Dj52DFFj6OZXZVg@mail.gmail.com>
Message-ID: <0E18B842-5E85-4B76-BED2-2BF4074E44EF@opencsw.org>

Hi Romeo,

Am 05.09.2012 um 04:30 schrieb Romeo Theriault <romeotheriault at opencsw.org>:
> I'd like to request root access so I can test installing and starting/stopping it.

You should be able to
  sudo bash
now on experimental*

> Romeo
> 
> On Tue, Sep 4, 2012 at 4:28 PM, Romeo Theriault <romeotheriault at opencsw.org> wrote:
> Hi, I'm not sure if this is the correct address to send this request to or not, but if possible I'd like to request access to the following "testing" machines:
> 
>   - testing9s
>   - testing9x
>   - testing10s
>   - testing10x
> 
> My id on the buildfarm machines is 'romeotheriault'.

I have adjusted the names to be now experimental* to more closely match
the catalog they run.


Best regards

  -- Dago

-- 
"You don't become great by trying to be great, you become great by wanting to do something,
and then doing it so hard that you become great in the process." - xkcd #896

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2351 bytes
Desc: not available
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120905/1b1762aa/attachment.p7s>

From romeot at hawaii.edu  Thu Sep  6 10:12:18 2012
From: romeot at hawaii.edu (Romeo Theriault)
Date: Wed, 05 Sep 2012 22:12:18 -1000
Subject: [csw-buildfarm] Request for access to "testing" machines
In-Reply-To: <0E18B842-5E85-4B76-BED2-2BF4074E44EF@opencsw.org>
References: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>
	<CAHo7ehV=PJgPV+mjHF0+7eC+BdxVnn3s=D8Dj52DFFj6OZXZVg@mail.gmail.com>
	<0E18B842-5E85-4B76-BED2-2BF4074E44EF@opencsw.org>
Message-ID: <CAHo7ehVh_a6a62EyN1+9G-jgmOFGrJvzpBKYLn6aM9AGhdNVkw@mail.gmail.com>

Hi Dago, Thank you very much. It works great for the experimental10{x,s}
machines but the experimental9 boxes are prompting me for a password. I've
tried what I thought it may be but it's not working.

Also, it's not mentioned in the /etc/SETUP file, but I figured I'd ask, are
there any experimental11 boxes?

Thank you again,
Romeo

On Wed, Sep 5, 2012 at 12:14 AM, Dagobert Michelsen <dam at opencsw.org> wrote:

> Hi Romeo,
>
> Am 05.09.2012 um 04:30 schrieb Romeo Theriault <romeotheriault at opencsw.org
> >:
> > I'd like to request root access so I can test installing and
> starting/stopping it.
>
> You should be able to
>   sudo bash
> now on experimental*
>
> > Romeo
> >
> > On Tue, Sep 4, 2012 at 4:28 PM, Romeo Theriault <
> romeotheriault at opencsw.org> wrote:
> > Hi, I'm not sure if this is the correct address to send this request to
> or not, but if possible I'd like to request access to the following
> "testing" machines:
> >
> >   - testing9s
> >   - testing9x
> >   - testing10s
> >   - testing10x
> >
> > My id on the buildfarm machines is 'romeotheriault'.
>
> I have adjusted the names to be now experimental* to more closely match
> the catalog they run.
>
>
> Best regards
>
>   -- Dago
>
> --
> "You don't become great by trying to be great, you become great by wanting
> to do something,
> and then doing it so hard that you become great in the process." - xkcd
> #896
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120905/5766b322/attachment.html>

From romeotheriault at opencsw.org  Thu Sep  6 10:13:46 2012
From: romeotheriault at opencsw.org (Romeo Theriault)
Date: Wed, 05 Sep 2012 22:13:46 -1000
Subject: [csw-buildfarm] Fwd:  Request for access to "testing" machines
In-Reply-To: <CAHo7ehVh_a6a62EyN1+9G-jgmOFGrJvzpBKYLn6aM9AGhdNVkw@mail.gmail.com>
References: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>
	<CAHo7ehV=PJgPV+mjHF0+7eC+BdxVnn3s=D8Dj52DFFj6OZXZVg@mail.gmail.com>
	<0E18B842-5E85-4B76-BED2-2BF4074E44EF@opencsw.org>
	<CAHo7ehVh_a6a62EyN1+9G-jgmOFGrJvzpBKYLn6aM9AGhdNVkw@mail.gmail.com>
Message-ID: <CAHo7ehV-kJ5BGjH6BKVnv55uSyw-AguJqtbLJdgF=ux9OrtLUw@mail.gmail.com>

Sorry if you get this twice, I forgot to change my address to my
opencsw.orgaddress.

Romeo

---------- Forwarded message ----------
From: Romeo Theriault <romeot at hawaii.edu>
Date: Wed, Sep 5, 2012 at 10:12 PM
Subject: Re: [csw-buildfarm] Request for access to "testing" machines
To: Dagobert Michelsen <dam at opencsw.org>
Cc: buildfarm at opencsw.org


Hi Dago, Thank you very much. It works great for the experimental10{x,s}
machines but the experimental9 boxes are prompting me for a password. I've
tried what I thought it may be but it's not working.

Also, it's not mentioned in the /etc/SETUP file, but I figured I'd ask, are
there any experimental11 boxes?

Thank you again,
Romeo


On Wed, Sep 5, 2012 at 12:14 AM, Dagobert Michelsen <dam at opencsw.org> wrote:

> Hi Romeo,
>
> Am 05.09.2012 um 04:30 schrieb Romeo Theriault <romeotheriault at opencsw.org
> >:
> > I'd like to request root access so I can test installing and
> starting/stopping it.
>
> You should be able to
>   sudo bash
> now on experimental*
>
> > Romeo
> >
> > On Tue, Sep 4, 2012 at 4:28 PM, Romeo Theriault <
> romeotheriault at opencsw.org> wrote:
> > Hi, I'm not sure if this is the correct address to send this request to
> or not, but if possible I'd like to request access to the following
> "testing" machines:
> >
> >   - testing9s
> >   - testing9x
> >   - testing10s
> >   - testing10x
> >
> > My id on the buildfarm machines is 'romeotheriault'.
>
> I have adjusted the names to be now experimental* to more closely match
> the catalog they run.
>
>
> Best regards
>
>   -- Dago
>
> --
> "You don't become great by trying to be great, you become great by wanting
> to do something,
> and then doing it so hard that you become great in the process." - xkcd
> #896
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120905/d43cdc71/attachment.html>

From dam at opencsw.org  Thu Sep  6 13:40:39 2012
From: dam at opencsw.org (Dagobert Michelsen)
Date: Thu, 6 Sep 2012 13:40:39 +0200
Subject: [csw-buildfarm] Request for access to "testing" machines
In-Reply-To: <CAHo7ehVh_a6a62EyN1+9G-jgmOFGrJvzpBKYLn6aM9AGhdNVkw@mail.gmail.com>
References: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>
	<CAHo7ehV=PJgPV+mjHF0+7eC+BdxVnn3s=D8Dj52DFFj6OZXZVg@mail.gmail.com>
	<0E18B842-5E85-4B76-BED2-2BF4074E44EF@opencsw.org>
	<CAHo7ehVh_a6a62EyN1+9G-jgmOFGrJvzpBKYLn6aM9AGhdNVkw@mail.gmail.com>
Message-ID: <A66D5E29-A7E6-41DB-A4BD-82B51B947ECC@opencsw.org>

Hi Romeo,

Am 06.09.2012 um 10:12 schrieb Romeo Theriault <romeot at hawaii.edu>:
> Hi Dago, Thank you very much. It works great for the experimental10{x,s} machines but the experimental9 boxes are prompting me for a password. I've tried what I thought it may be but it's not working. 

My fault, after adding you the account was still locked. It should work now.

> Also, it's not mentioned in the /etc/SETUP file, but I figured I'd ask, are there any experimental11 boxes?

Not yet, I have started to set them up now.


Best regards

  -- Dago

> 
> Thank you again,
> Romeo
> 
> On Wed, Sep 5, 2012 at 12:14 AM, Dagobert Michelsen <dam at opencsw.org> wrote:
> Hi Romeo,
> 
> Am 05.09.2012 um 04:30 schrieb Romeo Theriault <romeotheriault at opencsw.org>:
> > I'd like to request root access so I can test installing and starting/stopping it.
> 
> You should be able to
>   sudo bash
> now on experimental*
> 
> > Romeo
> >
> > On Tue, Sep 4, 2012 at 4:28 PM, Romeo Theriault <romeotheriault at opencsw.org> wrote:
> > Hi, I'm not sure if this is the correct address to send this request to or not, but if possible I'd like to request access to the following "testing" machines:
> >
> >   - testing9s
> >   - testing9x
> >   - testing10s
> >   - testing10x
> >
> > My id on the buildfarm machines is 'romeotheriault'.
> 
> I have adjusted the names to be now experimental* to more closely match
> the catalog they run.
> 
> 
> Best regards
> 
>   -- Dago
> 
> --
> "You don't become great by trying to be great, you become great by wanting to do something,
> and then doing it so hard that you become great in the process." - xkcd #896
> 
> 

-- 
"You don't become great by trying to be great, you become great by wanting to do something,
and then doing it so hard that you become great in the process." - xkcd #896

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120906/d4b06363/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2351 bytes
Desc: not available
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120906/d4b06363/attachment.p7s>

From romeotheriault at opencsw.org  Thu Sep  6 22:24:46 2012
From: romeotheriault at opencsw.org (Romeo Theriault)
Date: Thu, 06 Sep 2012 10:24:46 -1000
Subject: [csw-buildfarm] Request for access to "testing" machines
In-Reply-To: <A66D5E29-A7E6-41DB-A4BD-82B51B947ECC@opencsw.org>
References: <CAHo7ehXvuMxQxvrM-YEu+T+wnyvLsWEqa1s-b8Wy8EH5MmLcmA@mail.gmail.com>
	<CAHo7ehV=PJgPV+mjHF0+7eC+BdxVnn3s=D8Dj52DFFj6OZXZVg@mail.gmail.com>
	<0E18B842-5E85-4B76-BED2-2BF4074E44EF@opencsw.org>
	<CAHo7ehVh_a6a62EyN1+9G-jgmOFGrJvzpBKYLn6aM9AGhdNVkw@mail.gmail.com>
	<A66D5E29-A7E6-41DB-A4BD-82B51B947ECC@opencsw.org>
Message-ID: <CAHo7ehX2VFU_CEkDGn8aqwF38RORQ0iizo+-AfNwFR1OzOMD=A@mail.gmail.com>

Thank you Dago, I've verified that I can now get onto the 9 boxes. When you
have the 11 boxes ready I'd be interested in getting access to those as
well.

Thanks again for all your work on this.

Romeo

On Thu, Sep 6, 2012 at 1:40 AM, Dagobert Michelsen <dam at opencsw.org> wrote:

> Hi Romeo,
>
> Am 06.09.2012 um 10:12 schrieb Romeo Theriault <romeot at hawaii.edu>:
>
> Hi Dago, Thank you very much. It works great for the experimental10{x,s}
> machines but the experimental9 boxes are prompting me for a password. I've
> tried what I thought it may be but it's not working.
>
>
> My fault, after adding you the account was still locked. It should work
> now.
>
> Also, it's not mentioned in the /etc/SETUP file, but I figured I'd ask,
> are there any experimental11 boxes?
>
>
> Not yet, I have started to set them up now.
>
>
> Best regards
>
>   -- Dago
>
>
> Thank you again,
> Romeo
>
> On Wed, Sep 5, 2012 at 12:14 AM, Dagobert Michelsen <dam at opencsw.org>wrote:
>
>> Hi Romeo,
>>
>> Am 05.09.2012 um 04:30 schrieb Romeo Theriault <
>> romeotheriault at opencsw.org>:
>> > I'd like to request root access so I can test installing and
>> starting/stopping it.
>>
>> You should be able to
>>   sudo bash
>> now on experimental*
>>
>> > Romeo
>> >
>> > On Tue, Sep 4, 2012 at 4:28 PM, Romeo Theriault <
>> romeotheriault at opencsw.org> wrote:
>> > Hi, I'm not sure if this is the correct address to send this request to
>> or not, but if possible I'd like to request access to the following
>> "testing" machines:
>> >
>> >   - testing9s
>> >   - testing9x
>> >   - testing10s
>> >   - testing10x
>> >
>> > My id on the buildfarm machines is 'romeotheriault'.
>>
>> I have adjusted the names to be now experimental* to more closely match
>> the catalog they run.
>>
>>
>> Best regards
>>
>>   -- Dago
>>
>> --
>> "You don't become great by trying to be great, you become great by
>> wanting to do something,
>> and then doing it so hard that you become great in the process." - xkcd
>> #896
>>
>>
>
> --
> "You don't become great by trying to be great, you become great by wanting
> to do something,
> and then doing it so hard that you become great in the process." - xkcd
> #896
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120906/38780ca3/attachment.html>

From rupert.thurner at gmail.com  Fri Sep  7 18:03:13 2012
From: rupert.thurner at gmail.com (rupert THURNER)
Date: Fri, 7 Sep 2012 18:03:13 +0200
Subject: [csw-buildfarm] subvertpy on buildfarm
Message-ID: <CAJs9aZ8WQBuYiKCOFrKdvVb9o3_1NTXwPGeMRggBCbCvHr4pCA@mail.gmail.com>

could you please install subvertpy on the buildfarm? i'd like to use
(and therefor test as well) mercurial in future as subverison client.


$ hg clone --startrev HEAD
svn+https://gar.svn.sourceforge.net/svnroot/gar/csw/mgar mgar-hg
abort: no compatible bindings available:

Subversion 1.5.0 or later required, but no bindings were found
Subvertpy 0.7.4 or later required, but not found


From rupert.thurner at gmail.com  Fri Sep  7 18:15:43 2012
From: rupert.thurner at gmail.com (rupert THURNER)
Date: Fri, 7 Sep 2012 18:15:43 +0200
Subject: [csw-buildfarm] mgar platforms
Message-ID: <CAJs9aZ_YzHui+ZP_Ji5Y7Z_gE5hjWkFgO0p0qFAYapgAerAu-w@mail.gmail.com>

do you know where this error comes from? is this something with the buildfarm?

rupert @ unstable9s : ~/mgar-sav/pkg/mercurial/trunk
$ mgar platforms


ginstall -d /home/rupert/pkgs/07.Sep.2012
INFO:root:Juicing the srv4 package stream files...
Traceback (most recent call last):
                 |
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/gar//bin/checkpkg",
line 188, in <module>
    main()
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/gar//bin/checkpkg",
line 111, in main
    stats_list = collector.CollectStatsFromFiles(file_list, None)
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/lib/python/package_stats.py",
line 494, in CollectStatsFromFiles
    stats.CollectStats(force=force_unpack)
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/lib/python/package_stats.py",
line 169, in CollectStats
    if force or not self.StatsExist():
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/lib/python/package_stats.py",
line 102, in StatsExist
    pkg_stats = self.GetDbObject()
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/lib/python/package_stats.py",
line 85, in GetDbObject
    md5_sum = self.GetMd5sum()
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/lib/python/package_stats.py",
line 80, in GetMd5sum
    self.md5sum = self.srv4_pkg.GetMd5sum()
  File "/home/rupert/mgar-sav/pkg/.buildsys/v2/lib/python/package.py",
line 193, in GetMd5sum
    fp = open(self.pkg_path)
IOError: [Errno 2] No such file or directory:
'/home/rupert/pkgs/07.Sep.2012/mercurial-2.3.1,REV=2012.09.07-SunOS5.9-sparc-CSW.pkg.gz'
gmake[1]: *** [pkgcheck] Error 2
gmake[1]: Leaving directory `/home/rupert/mgar-sav/pkg/mercurial/trunk'
gmake: *** [platforms] Error 2


From bwalton at opencsw.org  Fri Sep  7 18:28:59 2012
From: bwalton at opencsw.org (Ben Walton)
Date: Fri, 07 Sep 2012 12:28:59 -0400
Subject: [csw-buildfarm] mgar platforms
In-Reply-To: <CAJs9aZ_YzHui+ZP_Ji5Y7Z_gE5hjWkFgO0p0qFAYapgAerAu-w@mail.gmail.com>
References: <CAJs9aZ_YzHui+ZP_Ji5Y7Z_gE5hjWkFgO0p0qFAYapgAerAu-w@mail.gmail.com>
Message-ID: <1347035258-sup-4299@pinkfloyd.chass.utoronto.ca>

Excerpts from rupert THURNER's message of Fri Sep 07 12:15:43 -0400 2012:

Hi Rupert,

> do you know where this error comes from? is this something with the
> buildfarm?

I experience this when working on packages and the date changes on
me.  (Given my timezone, it happens often enough.)  If you do a
remerge and the a repackage, things should be fine.  It need to
rebundle the packages and the look for them using values from the
correct date.

Thanks
-Ben
--
Ben Walton
Systems Programmer - CHASS
University of Toronto
C:416.407.5610 | W:416.978.4302



From bwalton at opencsw.org  Fri Sep  7 18:30:21 2012
From: bwalton at opencsw.org (Ben Walton)
Date: Fri, 07 Sep 2012 12:30:21 -0400
Subject: [csw-buildfarm] subvertpy on buildfarm
In-Reply-To: <CAJs9aZ8WQBuYiKCOFrKdvVb9o3_1NTXwPGeMRggBCbCvHr4pCA@mail.gmail.com>
References: <CAJs9aZ8WQBuYiKCOFrKdvVb9o3_1NTXwPGeMRggBCbCvHr4pCA@mail.gmail.com>
Message-ID: <1347035382-sup-3953@pinkfloyd.chass.utoronto.ca>

Excerpts from rupert THURNER's message of Fri Sep 07 12:03:13 -0400 2012:

> could you please install subvertpy on the buildfarm? i'd like to use
> (and therefor test as well) mercurial in future as subverison
> client.

Doing this now.

Thanks
-Ben
--
Ben Walton
Systems Programmer - CHASS
University of Toronto
C:416.407.5610 | W:416.978.4302



From grzemba at contac-dt.de  Thu Sep 13 08:22:11 2012
From: grzemba at contac-dt.de (Carsten Grzemba)
Date: Thu, 13 Sep 2012 08:22:11 +0200
Subject: [csw-buildfarm] Please install on buildfarm for build tuxpaint
Message-ID: <7480db50545f.505197b3@contac-dt.de>

Hi,

for build tuxpaint I need 
- libpaper
- libsdl_dev
on buildfarm.
Can somebody install this?

Thanks
--
Carsten Grzemba
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120913/368b2bea/attachment.html>

From igalic at opencsw.org  Wed Sep 19 20:26:24 2012
From: igalic at opencsw.org (Igor =?utf-8?Q?Gali=C4=87?=)
Date: Wed, 19 Sep 2012 18:26:24 -0000 (UTC)
Subject: [csw-buildfarm] expat package missing on unstable10x
Message-ID: <ce5b3446-9768-48d8-b202-0e1f7d8a04b4@iris>


Hey folks,

could someone please be as kind as to install the latest
version of CSWlibexpat-dev on unstable10x

kthxnbye

i

-- 
Igor Gali?

Tel: +43 (0) 664 886 22 883
Mail: i.galic at brainsware.org
URL: http://brainsware.org/
GPG: 6880 4155 74BD FD7C B515  2EA5 4B1D 9E08 A097 C9AE



From dam at opencsw.org  Wed Sep 19 21:44:08 2012
From: dam at opencsw.org (Dagobert Michelsen)
Date: Wed, 19 Sep 2012 21:44:08 +0200
Subject: [csw-buildfarm] expat package missing on unstable10x
In-Reply-To: <ce5b3446-9768-48d8-b202-0e1f7d8a04b4@iris>
References: <ce5b3446-9768-48d8-b202-0e1f7d8a04b4@iris>
Message-ID: <1BFB7630-F8EE-47A9-B6B3-0A5E9575B67B@opencsw.org>

Hi Igor,

Am 19.09.2012 um 20:26 schrieb Igor Gali?:
> could someone please be as kind as to install the latest
> version of CSWlibexpat-dev on unstable10x

It is already installed on unstable*. Maybe you miss out an option to locate it?


Best regards

  -- Dago



From igalic at opencsw.org  Wed Sep 19 23:13:06 2012
From: igalic at opencsw.org (Igor =?utf-8?Q?Gali=C4=87?=)
Date: Wed, 19 Sep 2012 21:13:06 -0000 (UTC)
Subject: [csw-buildfarm] expat package missing on unstable10x
In-Reply-To: <1BFB7630-F8EE-47A9-B6B3-0A5E9575B67B@opencsw.org>
Message-ID: <7a1d6689-f538-4c10-b08b-5b86a63824f8@iris>



----- Original Message -----
> Hi Igor,
> 
> Am 19.09.2012 um 20:26 schrieb Igor Gali?:
> > could someone please be as kind as to install the latest
> > version of CSWlibexpat-dev on unstable10x
> 
> It is already installed on unstable*. Maybe you miss out an option to
> locate it?

I did indeed.
Sorry for the noise.

> Best regards
> 
>   -- Dago

i


From raos at opencsw.org  Sun Sep 23 12:46:04 2012
From: raos at opencsw.org (Rafael Ostertag)
Date: Sun, 23 Sep 2012 12:46:04 +0200
Subject: [csw-buildfarm] New PostgreSQL packages
Message-ID: <20120923104604.GB1916@bender.opencsw.org>

Hi guys

Would you mind updating the following packages to version 9.2.0?

 CSWpostgresql-dev
 CSWlibecpg-compat3
 CSWlibecpg6
 CSWlibpgtypes3
 CSWlibpq5


Thanks in advance.

cheers
rafi


From dam at opencsw.org  Sun Sep 23 19:51:10 2012
From: dam at opencsw.org (Dagobert Michelsen)
Date: Sun, 23 Sep 2012 19:51:10 +0200
Subject: [csw-buildfarm] New PostgreSQL packages
In-Reply-To: <20120923104604.GB1916@bender.opencsw.org>
References: <20120923104604.GB1916@bender.opencsw.org>
Message-ID: <860053C0-0139-49C7-B00C-BE0BA3A0F171@opencsw.org>

Hi Rafi,

Am 23.09.2012 um 12:46 schrieb Rafael Ostertag <raos at opencsw.org>:
> Would you mind updating the following packages to version 9.2.0?
> 
> CSWpostgresql-dev
> CSWlibecpg-compat3
> CSWlibecpg6
> CSWlibpgtypes3
> CSWlibpq5


Doing this now.


Best regards

  -- Dago


-- 
"You don't become great by trying to be great, you become great by wanting to do something,
and then doing it so hard that you become great in the process." - xkcd #896

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2351 bytes
Desc: not available
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20120923/fc0f9a83/attachment.p7s>

From raos at opencsw.org  Mon Sep 24 14:19:44 2012
From: raos at opencsw.org (Rafael Ostertag)
Date: Mon, 24 Sep 2012 14:19:44 +0200
Subject: [csw-buildfarm] New PostgreSQL packages
In-Reply-To: <860053C0-0139-49C7-B00C-BE0BA3A0F171@opencsw.org>
References: <20120923104604.GB1916@bender.opencsw.org>
	<860053C0-0139-49C7-B00C-BE0BA3A0F171@opencsw.org>
Message-ID: <20120924121944.GC1916@bender.opencsw.org>

Hi Dago
On Sun, Sep 23, 2012 at 07:51:10PM +0200, Dagobert Michelsen wrote:
> Hi Rafi,
> 
> Am 23.09.2012 um 12:46 schrieb Rafael Ostertag <raos at opencsw.org>:
> > Would you mind updating the following packages to version 9.2.0?
> > 
> > CSWpostgresql-dev
> > CSWlibecpg-compat3
> > CSWlibecpg6
> > CSWlibpgtypes3
> > CSWlibpq5
> 
> 
> Doing this now.

Thanks a lot.

cheers
rafi


From yann at pleiades.fr.eu.org  Sat Sep 29 13:34:06 2012
From: yann at pleiades.fr.eu.org (Yann Rouillard)
Date: Sat, 29 Sep 2012 13:34:06 +0200
Subject: [csw-buildfarm] Request to install libgnomecups
Message-ID: <CAF2fwse1d6dcko+FuAmFtiz4PED6WJsVTi6nSVRqH-4G2A8noQ@mail.gmail.com>

Hi,

Could you install on the buildfarm the libgnomecups packages available
in  /home/yann/build/ ?

I need to recompile and upload together libgnomeprint and libgnomecups
but libgnomeprint requires libgnomecups to be updated.

Thanks in advance,

Yann


From bwalton at opencsw.org  Sat Sep 29 14:39:01 2012
From: bwalton at opencsw.org (Ben Walton)
Date: Sat, 29 Sep 2012 08:39:01 -0400
Subject: [csw-buildfarm] Request to install libgnomecups
In-Reply-To: <CAF2fwse1d6dcko+FuAmFtiz4PED6WJsVTi6nSVRqH-4G2A8noQ@mail.gmail.com>
References: <CAF2fwse1d6dcko+FuAmFtiz4PED6WJsVTi6nSVRqH-4G2A8noQ@mail.gmail.com>
Message-ID: <CAP30j16H=zqdXbbX86xW9=OB=g_Y5efUN5wcwAnW6DfZEiBYpw@mail.gmail.com>

Hi Yann,

> Could you install on the buildfarm the libgnomecups packages available
> in  /home/yann/build/ ?
>
> I need to recompile and upload together libgnomeprint and libgnomecups
> but libgnomeprint requires libgnomecups to be updated.

This should be done on a testing* box.  We don't install unreleased
packages on unstable*, etc.

Do you have access to a testing* box?

Thanks
-Ben


From bwalton at opencsw.org  Sat Sep 29 15:22:52 2012
From: bwalton at opencsw.org (Ben Walton)
Date: Sat, 29 Sep 2012 09:22:52 -0400
Subject: [csw-buildfarm] Request to install libgnomecups
In-Reply-To: <CAF2fwse5PTDwcZ5hMwYO_mhTqE3S5H=pgkeawrPYF+E0W55Wtw@mail.gmail.com>
References: <CAF2fwse1d6dcko+FuAmFtiz4PED6WJsVTi6nSVRqH-4G2A8noQ@mail.gmail.com>
	<CAP30j16H=zqdXbbX86xW9=OB=g_Y5efUN5wcwAnW6DfZEiBYpw@mail.gmail.com>
	<CAF2fwse7pvSszuGejGaYxhojeT5Y6dK99gJzn+pq6tKKv57-SA@mail.gmail.com>
	<CAP30j16QtZd-U_KWbzGD=0iYiDU=qo1VBd+XWgwfBFtLxAgN2Q@mail.gmail.com>
	<CAF2fwse5PTDwcZ5hMwYO_mhTqE3S5H=pgkeawrPYF+E0W55Wtw@mail.gmail.com>
Message-ID: <CAP30j162uMo2H3q8nOi0GHvmaXvLiCugE18zGwC3aUjSH-S+AA@mail.gmail.com>

Hi Yann,

> I will use testing10s and testing10x.

Cool.  I just put you in the wheel group on those boxes so you should
have full sudo rights now.  I'll let you do the installations as you
need them.  These are testing boxes, so add/remove packages as
required.

Thanks
-Ben