[csw-devel] SF.net SVN: gar:[4130] csw/mgar/pkg
valholla at users.sourceforge.net
valholla at users.sourceforge.net
Wed Apr 1 19:00:29 CEST 2009
Revision: 4130
http://gar.svn.sourceforge.net/gar/?rev=4130&view=rev
Author: valholla
Date: 2009-04-01 17:00:29 +0000 (Wed, 01 Apr 2009)
Log Message:
-----------
initial checkin
Added Paths:
-----------
csw/mgar/pkg/chrpath/
csw/mgar/pkg/chrpath/Makefile
csw/mgar/pkg/chrpath/branches/
csw/mgar/pkg/chrpath/tags/
csw/mgar/pkg/chrpath/trunk/
csw/mgar/pkg/chrpath/trunk/Makefile
csw/mgar/pkg/chrpath/trunk/checksums
csw/mgar/pkg/chrpath/trunk/files/
csw/mgar/pkg/chrpath/trunk/files/chrpath_0.13-2.diff
Added: csw/mgar/pkg/chrpath/Makefile
===================================================================
--- csw/mgar/pkg/chrpath/Makefile (rev 0)
+++ csw/mgar/pkg/chrpath/Makefile 2009-04-01 17:00:29 UTC (rev 4130)
@@ -0,0 +1,15 @@
+# vim: ft=make ts=4 sw=4 noet
+
+default:
+ @echo "You are in the pkg/ directory."
+
+%:
+ $(MAKE) -C trunk $*
+
+paranoid-%:
+ $(MAKE) -C trunk $* || exit 2
+
+export BUILDLOG ?= $(shell pwd)/buildlog.txt
+
+report-%:
+ $(MAKE) -C trunk $* || echo " *** make $* in $$i failed ***" >> $(BUILDLOG)
Added: csw/mgar/pkg/chrpath/trunk/Makefile
===================================================================
--- csw/mgar/pkg/chrpath/trunk/Makefile (rev 0)
+++ csw/mgar/pkg/chrpath/trunk/Makefile 2009-04-01 17:00:29 UTC (rev 4130)
@@ -0,0 +1,40 @@
+GARNAME = chrpath
+GARVERSION = 0.13
+CATEGORIES = utils
+
+DESCRIPTION = A program to fix/change runpaths
+define BLURB
+endef
+
+MASTER_SITES = http://directory.fsf.org/project/chrpath/
+DISTFILES = $(GARNAME)-$(GARVERSION).tar.gz
+
+PACKAGES = CSWchrpath
+CATALOGNAME_CSWchrpath = chrpath
+SPKG_DESC_CSWchrpath = $(DESCRIPTION)
+
+PATCHFILES = chrpath_0.13-2.diff
+PATCHDIR = $(WORKSRC)
+
+
+# We define upstream file regex so we can be notifed of
+# new upstream software release
+UFILES_REGEX = $(GARNAME)-(\d+(?:\.\d+)*).tar.gz
+
+BUILD64 = 1
+NOISALIST = 1
+
+CONFIGURE_ARGS = $(DIRPATHS)
+
+## There are no tests for this
+## runtest.ksh is broken manual test required
+TEST_SCRIPTS = skip
+
+test-skip:
+ $(DONADA)
+
+post-configure-modulated:
+ @(perl -i -plne 's|docdir = .*|docdir = $(prefix)/share/doc/$(GARNAME)|'\
+ $(WORKSRC)/Makefile)
+
+include gar/category.mk
Added: csw/mgar/pkg/chrpath/trunk/checksums
===================================================================
--- csw/mgar/pkg/chrpath/trunk/checksums (rev 0)
+++ csw/mgar/pkg/chrpath/trunk/checksums 2009-04-01 17:00:29 UTC (rev 4130)
@@ -0,0 +1,2 @@
+b73072a8fbba277558c50364b65bb407 download/chrpath-0.13.tar.gz
+963e8a8a27f91bf1f7a37c66750f60d7 download/chrpath_0.13-2.diff
Added: csw/mgar/pkg/chrpath/trunk/files/chrpath_0.13-2.diff
===================================================================
--- csw/mgar/pkg/chrpath/trunk/files/chrpath_0.13-2.diff (rev 0)
+++ csw/mgar/pkg/chrpath/trunk/files/chrpath_0.13-2.diff 2009-04-01 17:00:29 UTC (rev 4130)
@@ -0,0 +1,8899 @@
+--- chrpath-0.13.orig/Makefile.in
++++ chrpath-0.13/Makefile.in
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
++# Makefile.in generated by automake 1.8.5 from Makefile.am.
++# @configure_input@
+
+-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
++# 2003, 2004 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,75 +12,189 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
++ at SET_MAKE@
+
+-SHELL = @SHELL@
++
++SOURCES = $(chrpath_SOURCES)
+
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DESTDIR =
+-
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+ top_builddir = .
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+ INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
++host_triplet = @host@
++bin_PROGRAMS = chrpath$(EXEEXT)
++DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
++ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
++ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
++ config.guess config.sub depcomp install-sh ltmain.sh missing \
++ mkinstalldirs
++subdir = .
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/configure.ac
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno configure.status.lineno
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = config.h
++CONFIG_CLEAN_FILES =
++am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"
++binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
++PROGRAMS = $(bin_PROGRAMS)
++am_chrpath_OBJECTS = chrpath.$(OBJEXT) killrpath.$(OBJEXT) \
++ main.$(OBJEXT) elf.$(OBJEXT)
++chrpath_OBJECTS = $(am_chrpath_OBJECTS)
++chrpath_LDADD = $(LDADD)
++DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
++depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__depfiles_maybe = depfiles
++ at AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/chrpath.Po ./$(DEPDIR)/elf.Po \
++ at AMDEP_TRUE@ ./$(DEPDIR)/killrpath.Po ./$(DEPDIR)/main.Po
++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++CCLD = $(CC)
++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
++SOURCES = $(chrpath_SOURCES)
++DIST_SOURCES = $(chrpath_SOURCES)
++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
++ html-recursive info-recursive install-data-recursive \
++ install-exec-recursive install-info-recursive \
++ install-recursive installcheck-recursive installdirs-recursive \
++ pdf-recursive ps-recursive uninstall-info-recursive \
++ uninstall-recursive
++man1dir = $(mandir)/man1
++NROFF = nroff
++MANS = $(man_MANS)
++docDATA_INSTALL = $(INSTALL_DATA)
++DATA = $(doc_DATA)
++ETAGS = etags
++CTAGS = ctags
++DIST_SUBDIRS = $(SUBDIRS)
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++ { test ! -d $(distdir) \
++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
++ && rm -fr $(distdir); }; }
++DIST_ARCHIVES = $(distdir).tar.gz
++GZIP_ENV = --best
++distuninstallcheck_listfiles = find . -type f -print
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
++AMDEP_FALSE = @AMDEP_FALSE@
++AMDEP_TRUE = @AMDEP_TRUE@
++AMTAR = @AMTAR@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
++CPP = @CPP@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
++EXEEXT = @EXEEXT@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
++LDFLAGS = @LDFLAGS@
+ LDRPATH = @LDRPATH@
++LIBOBJS = @LIBOBJS@
++LIBS = @LIBS@
++LTLIBOBJS = @LTLIBOBJS@
+ MAINT = @MAINT@
++MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
++MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+ MAKEINFO = @MAKEINFO@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_VERSION = @PACKAGE_VERSION@
++PATH_SEPARATOR = @PATH_SEPARATOR@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
+ VERSION = @VERSION@
+-
++ac_ct_CC = @ac_ct_CC@
++ac_ct_STRIP = @ac_ct_STRIP@
++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++datadir = @datadir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++sysconfdir = @sysconfdir@
++target = @target@
++target_alias = @target_alias@
++target_cpu = @target_cpu@
++target_os = @target_os@
++target_vendor = @target_vendor@
+ SUBDIRS = testsuite deb
+-
+ docdir = $(prefix)/doc/$(PACKAGE)-$(VERSION)
+-
+ doc_DATA = AUTHORS COPYING ChangeLog INSTALL NEWS README
+-
+-bin_PROGRAMS = chrpath
+-
+ man_MANS = chrpath.1
+-
+-chrpath_SOURCES = chrpath.c killrpath.c main.c elf.c protos.h
+-
++chrpath_SOURCES = \
++ chrpath.c \
++ killrpath.c \
++ main.c \
++ elf.c \
++ protos.h
+
+ EXTRA_DIST = ChangeLog.usermap $(man_MANS)
+-
+ CLEANFILES = *.bb *.bbg *.da *.gcov testsuite/*.bb testsuite/*.bbg
+
+ # ChangeLog autogenerated from CVS log messages
+@@ -90,142 +206,121 @@
+ # --usermap ... Make usernames with names/emails in given file
+ # --ignore ChangeLog Don't log changes to the ChangeLog itself
+ CVS2CL = cvs2cl
+-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_HEADER = config.h
+-CONFIG_CLEAN_FILES =
+-PROGRAMS = $(bin_PROGRAMS)
+-
+-
+-DEFS = @DEFS@ -I. -I$(srcdir) -I.
+-CPPFLAGS = @CPPFLAGS@
+-LDFLAGS = @LDFLAGS@
+-LIBS = @LIBS@
+-chrpath_OBJECTS = chrpath.o killrpath.o main.o elf.o
+-chrpath_LDADD = $(LDADD)
+-chrpath_DEPENDENCIES =
+-chrpath_LDFLAGS =
+-CFLAGS = @CFLAGS@
+-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+-CCLD = $(CC)
+-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+-man1dir = $(mandir)/man1
+-MANS = $(man_MANS)
+-
+-NROFF = nroff
+-DATA = $(doc_DATA)
+-
+-DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
+-Makefile.am Makefile.in NEWS acinclude.m4 aclocal.m4 config.guess \
+-config.h.in config.sub configure configure.ac install-sh ltmain.sh \
+-missing mkinstalldirs
+-
+-
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+-
+-TAR = tar
+-GZIP_ENV = --best
+-SOURCES = $(chrpath_SOURCES)
+-OBJECTS = $(chrpath_OBJECTS)
++all: config.h
++ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+-all: all-redirect
+ .SUFFIXES:
+-.SUFFIXES: .S .c .o .s
+-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
+-
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+-
+-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.ac acinclude.m4
+- cd $(srcdir) && $(ACLOCAL)
++.SUFFIXES: .c .o .obj
++am--refresh:
++ @:
++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
++ cd $(srcdir) && $(AUTOMAKE) --gnu \
++ && exit 0; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
++ cd $(top_srcdir) && \
++ $(AUTOMAKE) --gnu Makefile
++.PRECIOUS: Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ echo ' $(SHELL) ./config.status'; \
++ $(SHELL) ./config.status;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
++ esac;
+
+-config.status: $(srcdir)/configure.ac $(CONFIG_STATUS_DEPENDENCIES)
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
++
++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+-config.h: stamp-h
++config.h: stamp-h1
+ @if test ! -f $@; then \
+- rm -f stamp-h; \
+- $(MAKE) stamp-h; \
++ rm -f stamp-h1; \
++ $(MAKE) stamp-h1; \
+ else :; fi
+-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES= CONFIG_HEADERS=config.h \
+- $(SHELL) ./config.status
+- @echo timestamp > stamp-h 2> /dev/null
+-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
+- @if test ! -f $@; then \
+- rm -f $(srcdir)/stamp-h.in; \
+- $(MAKE) $(srcdir)/stamp-h.in; \
+- else :; fi
+-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOHEADER)
+- @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
+-
+-mostlyclean-hdr:
+
+-clean-hdr:
++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
++ @rm -f stamp-h1
++ cd $(top_builddir) && $(SHELL) ./config.status config.h
++$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
++ cd $(top_srcdir) && $(AUTOHEADER)
++ rm -f stamp-h1
++ touch $@
+
+ distclean-hdr:
+- -rm -f config.h
+-
+-maintainer-clean-hdr:
+-
+-mostlyclean-binPROGRAMS:
+-
+-clean-binPROGRAMS:
+- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+-
+-distclean-binPROGRAMS:
+-
+-maintainer-clean-binPROGRAMS:
+-
++ -rm -f config.h stamp-h1
+ install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+- $(mkinstalldirs) $(DESTDIR)$(bindir)
++ test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+- if test -f $$p; then \
+- echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+- $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
++ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
++ if test -f $$p \
++ ; then \
++ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
++ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
++ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+ else :; fi; \
+ done
+
+ uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+- list='$(bin_PROGRAMS)'; for p in $$list; do \
+- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
++ @list='$(bin_PROGRAMS)'; for p in $$list; do \
++ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
++ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
++ rm -f "$(DESTDIR)$(bindir)/$$f"; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+-.s.o:
+- $(COMPILE) -c $<
+-
+-.S.o:
+- $(COMPILE) -c $<
++clean-binPROGRAMS:
++ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
++chrpath$(EXEEXT): $(chrpath_OBJECTS) $(chrpath_DEPENDENCIES)
++ @rm -f chrpath$(EXEEXT)
++ $(LINK) $(chrpath_LDFLAGS) $(chrpath_OBJECTS) $(chrpath_LDADD) $(LIBS)
+
+ mostlyclean-compile:
+- -rm -f *.o core *.core
+-
+-clean-compile:
++ -rm -f *.$(OBJEXT)
+
+ distclean-compile:
+ -rm -f *.tab.c
+
+-maintainer-clean-compile:
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chrpath.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/elf.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/killrpath.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/main.Po at am__quote@
+
+-chrpath: $(chrpath_OBJECTS) $(chrpath_DEPENDENCIES)
+- @rm -f chrpath
+- $(LINK) $(chrpath_LDFLAGS) $(chrpath_OBJECTS) $(chrpath_LDADD) $(LIBS)
+-
+-install-man1:
+- $(mkinstalldirs) $(DESTDIR)$(man1dir)
+- @list='$(man1_MANS)'; \
+- l2='$(man_MANS)'; for i in $$l2; do \
++.c.o:
++ at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
++ at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(COMPILE) -c $<
++
++.c.obj:
++ at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
++ at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
++uninstall-info-am:
++install-man1: $(man1_MANS) $(man_MANS)
++ @$(NORMAL_INSTALL)
++ test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
++ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
++ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
++ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+@@ -234,50 +329,53 @@
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
++ case "$$ext" in \
++ 1*) ;; \
++ *) ext='1' ;; \
++ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
++ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
+-
+ uninstall-man1:
+- @list='$(man1_MANS)'; \
+- l2='$(man_MANS)'; for i in $$l2; do \
++ @$(NORMAL_UNINSTALL)
++ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
++ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
++ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
++ case "$$ext" in \
++ 1*) ;; \
++ *) ext='1' ;; \
++ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
++ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+- rm -f $(DESTDIR)$(man1dir)/$$inst; \
++ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
++ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
+-install-man: $(MANS)
+- @$(NORMAL_INSTALL)
+- $(MAKE) $(AM_MAKEFLAGS) install-man1
+-uninstall-man:
+- @$(NORMAL_UNINSTALL)
+- $(MAKE) $(AM_MAKEFLAGS) uninstall-man1
+-
+ install-docDATA: $(doc_DATA)
+ @$(NORMAL_INSTALL)
+- $(mkinstalldirs) $(DESTDIR)$(docdir)
++ test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
+ @list='$(doc_DATA)'; for p in $$list; do \
+- if test -f $(srcdir)/$$p; then \
+- echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docdir)/$$p"; \
+- $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docdir)/$$p; \
+- else if test -f $$p; then \
+- echo " $(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p"; \
+- $(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p; \
+- fi; fi; \
++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
++ f="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
++ $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
+ done
+
+ uninstall-docDATA:
+ @$(NORMAL_UNINSTALL)
+- list='$(doc_DATA)'; for p in $$list; do \
+- rm -f $(DESTDIR)$(docdir)/$$p; \
++ @list='$(doc_DATA)'; for p in $$list; do \
++ f="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
++ rm -f "$(DESTDIR)$(docdir)/$$f"; \
+ done
+
+ # This directory's subdirectories are mostly independent; you can cd
+@@ -286,13 +384,8 @@
+ # (1) if the variable is set in `config.status', edit `config.status'
+ # (which will cause the Makefiles to be regenerated when you run `make');
+ # (2) otherwise, pass the desired values on the `make' command line.
+-
+- at SET_MAKE@
+-
+-all-recursive install-data-recursive install-exec-recursive \
+-installdirs-recursive install-recursive uninstall-recursive \
+-check-recursive installcheck-recursive info-recursive dvi-recursive:
+- @set fnord $(MAKEFLAGS); amf=$$2; \
++$(RECURSIVE_TARGETS):
++ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+@@ -312,13 +405,18 @@
+
+ mostlyclean-recursive clean-recursive distclean-recursive \
+ maintainer-clean-recursive:
+- @set fnord $(MAKEFLAGS); amf=$$2; \
++ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+- rev="$$subdir $$rev"; \
+- test "$$subdir" = "." && dot_seen=yes; \
++ case "$@" in \
++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
++ *) list='$(SUBDIRS)' ;; \
++ esac; \
++ rev=''; for subdir in $$list; do \
++ if test "$$subdir" = "."; then :; else \
++ rev="$$subdir $$rev"; \
++ fi; \
+ done; \
+- test "$$dot_seen" = "no" && rev=". $$rev"; \
++ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+@@ -334,189 +432,318 @@
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
++ctags-recursive:
++ list='$(SUBDIRS)'; for subdir in $$list; do \
++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
++ done
+
+-tags: TAGS
+-
+-ID: $(HEADERS) $(SOURCES) $(LISP)
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+- here=`pwd` && cd $(srcdir) \
+- && mkid -f$$here/ID $$unique $(LISP)
++ mkid -fID $$unique
++tags: TAGS
+
+-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
++TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
++ include_option=--etags-include; \
++ empty_fix=.; \
++ else \
++ include_option=--include; \
++ empty_fix=; \
++ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+- if test "$$subdir" = .; then :; else \
+- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+- fi; \
++ if test "$$subdir" = .; then :; else \
++ test ! -f $$subdir/TAGS || \
++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
++ fi; \
+ done; \
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
+-
+-mostlyclean-tags:
+-
+-clean-tags:
++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$tags $$unique; \
++ fi
++ctags: CTAGS
++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
++ tags=; \
++ here=`pwd`; \
++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
++ END { for (i in files) print i; }'`; \
++ test -z "$(CTAGS_ARGS)$$tags$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++ $$tags $$unique
++
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && cd $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) $$here
+
+ distclean-tags:
+- -rm -f TAGS ID
+-
+-maintainer-clean-tags:
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+-distdir = $(PACKAGE)-$(VERSION)
+-top_distdir = $(distdir)
+-
+-# This target untars the dist file and tries a VPATH configuration. Then
+-# it guarantees that the distribution is self-contained by making another
+-# tarfile.
+-distcheck: dist
+- -rm -rf $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+- mkdir $(distdir)/=build
+- mkdir $(distdir)/=inst
+- dc_install_base=`cd $(distdir)/=inst && pwd`; \
+- cd $(distdir)/=build \
+- && ../configure --srcdir=.. --prefix=$$dc_install_base \
+- && $(MAKE) $(AM_MAKEFLAGS) \
+- && $(MAKE) $(AM_MAKEFLAGS) dvi \
+- && $(MAKE) $(AM_MAKEFLAGS) check \
+- && $(MAKE) $(AM_MAKEFLAGS) install \
+- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+- && $(MAKE) $(AM_MAKEFLAGS) dist
+- -rm -rf $(distdir)
+- @banner="$(distdir).tar.gz is ready for distribution"; \
+- dashes=`echo "$$banner" | sed s/./=/g`; \
+- echo "$$dashes"; \
+- echo "$$banner"; \
+- echo "$$dashes"
+-dist: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+-dist-all: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+ distdir: $(DISTFILES)
+- -rm -rf $(distdir)
++ $(am__remove_distdir)
+ mkdir $(distdir)
+- -chmod 777 $(distdir)
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
++ list='$(DISTFILES)'; for file in $$list; do \
++ case $$file in \
++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
++ esac; \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
++ dir="/$$dir"; \
++ $(mkdir_p) "$(distdir)$$dir"; \
++ else \
++ dir=''; \
++ fi; \
+ if test -d $$d/$$file; then \
+- cp -pr $$d/$$file $(distdir)/$$file; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
++ fi; \
++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file || :; \
++ || cp -p $$d/$$file $(distdir)/$$file \
++ || exit 1; \
+ fi; \
+ done
+- for subdir in $(SUBDIRS); do \
++ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+- test -d $(distdir)/$$subdir \
+- || mkdir $(distdir)/$$subdir \
++ test -d "$(distdir)/$$subdir" \
++ || mkdir "$(distdir)/$$subdir" \
+ || exit 1; \
+- chmod 777 $(distdir)/$$subdir; \
+- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
++ (cd $$subdir && \
++ $(MAKE) $(AM_MAKEFLAGS) \
++ top_distdir="../$(top_distdir)" \
++ distdir="../$(distdir)/$$subdir" \
++ distdir) \
+ || exit 1; \
+ fi; \
+ done
+-chrpath.o: chrpath.c config.h protos.h
+-elf.o: elf.c config.h protos.h
+-killrpath.o: killrpath.c config.h protos.h
+-main.o: main.c config.h protos.h
++ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
++ || chmod -R a+r $(distdir)
++dist-gzip: distdir
++ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++dist-bzip2: distdir
++ $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
++ $(am__remove_distdir)
++
++dist-tarZ: distdir
++ $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
++ $(am__remove_distdir)
++
++dist-shar: distdir
++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
++ $(am__remove_distdir)
++
++dist-zip: distdir
++ -rm -f $(distdir).zip
++ zip -rq $(distdir).zip $(distdir)
++ $(am__remove_distdir)
++
++dist dist-all: distdir
++ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
+
+-info-am:
+-info: info-recursive
+-dvi-am:
+-dvi: dvi-recursive
++# This target untars the dist file and tries a VPATH configuration. Then
++# it guarantees that the distribution is self-contained by making another
++# tarfile.
++distcheck: dist
++ case '$(DIST_ARCHIVES)' in \
++ *.tar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
++ *.tar.bz2*) \
++ bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
++ *.tar.Z*) \
++ uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
++ *.shar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
++ *.zip*) \
++ unzip $(distdir).zip ;;\
++ esac
++ chmod -R a-w $(distdir); chmod a+w $(distdir)
++ mkdir $(distdir)/_build
++ mkdir $(distdir)/_inst
++ chmod a-w $(distdir)
++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++ && cd $(distdir)/_build \
++ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
++ $(DISTCHECK_CONFIGURE_FLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) dvi \
++ && $(MAKE) $(AM_MAKEFLAGS) check \
++ && $(MAKE) $(AM_MAKEFLAGS) install \
++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++ distuninstallcheck \
++ && chmod -R a-w "$$dc_install_base" \
++ && ({ \
++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++ } || { rm -rf "$$dc_destdir"; exit 1; }) \
++ && rm -rf "$$dc_destdir" \
++ && $(MAKE) $(AM_MAKEFLAGS) dist \
++ && rm -rf $(DIST_ARCHIVES) \
++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
++ $(am__remove_distdir)
++ @(echo "$(distdir) archives ready for distribution: "; \
++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
++distuninstallcheck:
++ @cd $(distuninstallcheck_dir) \
++ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
++ || { echo "ERROR: files left after uninstall:" ; \
++ if test -n "$(DESTDIR)"; then \
++ echo " (check DESTDIR support)"; \
++ fi ; \
++ $(distuninstallcheck_listfiles) ; \
++ exit 1; } >&2
++distcleancheck: distclean
++ @if test '$(srcdir)' = . ; then \
++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++ exit 1 ; \
++ fi
++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left in build directory after distclean:" ; \
++ $(distcleancheck_listfiles) ; \
++ exit 1; } >&2
+ check-am: all-am
+ check: check-recursive
+-installcheck-am:
+-installcheck: installcheck-recursive
+-all-recursive-am: config.h
+- $(MAKE) $(AM_MAKEFLAGS) all-recursive
+-
+-install-exec-am: install-binPROGRAMS
++all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h
++installdirs: installdirs-recursive
++installdirs-am:
++ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"; do \
++ test -z "$$dir" || $(mkdir_p) "$$dir"; \
++ done
++install: install-recursive
+ install-exec: install-exec-recursive
+-
+-install-data-am: install-man install-docDATA
+ install-data: install-data-recursive
++uninstall: uninstall-recursive
+
+ install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+-install: install-recursive
+-uninstall-am: uninstall-binPROGRAMS uninstall-man uninstall-docDATA
+-uninstall: uninstall-recursive
+-all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h
+-all-redirect: all-recursive-am
+-install-strip:
+- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+-installdirs: installdirs-recursive
+-installdirs-am:
+- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1 \
+- $(DESTDIR)$(docdir)
+-
+
++installcheck: installcheck-recursive
++install-strip:
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ `test -z '$(STRIP)' || \
++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ mostlyclean-generic:
+
+ clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+ distclean-generic:
+- -rm -f Makefile $(CONFIG_CLEAN_FILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
++ -rm -f $(CONFIG_CLEAN_FILES)
+
+ maintainer-clean-generic:
+-mostlyclean-am: mostlyclean-hdr mostlyclean-binPROGRAMS \
+- mostlyclean-compile mostlyclean-tags \
+- mostlyclean-generic
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-recursive
+
+-mostlyclean: mostlyclean-recursive
++clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+-clean-am: clean-hdr clean-binPROGRAMS clean-compile clean-tags \
+- clean-generic mostlyclean-am
++distclean: distclean-recursive
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf ./$(DEPDIR)
++ -rm -f Makefile
++distclean-am: clean-am distclean-compile distclean-generic \
++ distclean-hdr distclean-tags
+
+-clean: clean-recursive
++dvi: dvi-recursive
+
+-distclean-am: distclean-hdr distclean-binPROGRAMS distclean-compile \
+- distclean-tags distclean-generic clean-am
++dvi-am:
+
+-distclean: distclean-recursive
+- -rm -f config.status
++html: html-recursive
+
+-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-binPROGRAMS \
+- maintainer-clean-compile maintainer-clean-tags \
+- maintainer-clean-generic distclean-am
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
++info: info-recursive
++
++info-am:
++
++install-data-am: install-docDATA install-man
++
++install-exec-am: install-binPROGRAMS
++
++install-info: install-info-recursive
++
++install-man: install-man1
++
++installcheck-am:
+
+ maintainer-clean: maintainer-clean-recursive
+- -rm -f config.status
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf $(top_srcdir)/autom4te.cache
++ -rm -rf ./$(DEPDIR)
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
+
+-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+-mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
+-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
+-mostlyclean-compile distclean-compile clean-compile \
+-maintainer-clean-compile install-man1 uninstall-man1 install-man \
+-uninstall-man uninstall-docDATA install-docDATA install-data-recursive \
+-uninstall-data-recursive install-exec-recursive \
+-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+-all-recursive check-recursive installcheck-recursive info-recursive \
+-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
+-install-exec-am install-exec install-data-am install-data install-am \
+-install uninstall-am uninstall all-redirect all-am all installdirs-am \
+-installdirs mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++mostlyclean: mostlyclean-recursive
++
++mostlyclean-am: mostlyclean-compile mostlyclean-generic
++
++pdf: pdf-recursive
++
++pdf-am:
++
++ps: ps-recursive
++
++ps-am:
++
++uninstall-am: uninstall-binPROGRAMS uninstall-docDATA \
++ uninstall-info-am uninstall-man
++
++uninstall-info: uninstall-info-recursive
++
++uninstall-man: uninstall-man1
++
++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
++ check-am clean clean-binPROGRAMS clean-generic clean-recursive \
++ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
++ dist-shar dist-tarZ dist-zip distcheck distclean \
++ distclean-compile distclean-generic distclean-hdr \
++ distclean-recursive distclean-tags distcleancheck distdir \
++ distuninstallcheck dvi dvi-am html html-am info info-am \
++ install install-am install-binPROGRAMS install-data \
++ install-data-am install-docDATA install-exec install-exec-am \
++ install-info install-info-am install-man install-man1 \
++ install-strip installcheck installcheck-am installdirs \
++ installdirs-am maintainer-clean maintainer-clean-generic \
++ maintainer-clean-recursive mostlyclean mostlyclean-compile \
++ mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \
++ tags tags-recursive uninstall uninstall-am \
++ uninstall-binPROGRAMS uninstall-docDATA uninstall-info-am \
++ uninstall-man uninstall-man1
+
+
+ debs:
+@@ -526,7 +753,6 @@
+ log: ChangeLog.usermap
+ $(CVS2CL) -b --gmt --log-opts "-d'2001-01-01< now'" --window 7200 \
+ --usermap ChangeLog.usermap --ignore ChangeLog -f ChangeLog
+-
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+ .NOEXPORT:
+--- chrpath-0.13.orig/acinclude.m4
++++ chrpath-0.13/acinclude.m4
+@@ -22,7 +22,7 @@
+ AC_DEFUN(CHRPATH_LDRPATH_OPTION,
+ [AC_REQUIRE([AC_CANONICAL_TARGET])[]dnl
+ case "$target" in
+- *-linux*)
++ *-linux*|*-gnu*|*-k*bsd*-gnu)
+ LDRPATH=-Wl,-rpath,
+ ;;
+ *-*-irix*|*-*-osf*)
+--- chrpath-0.13.orig/aclocal.m4
++++ chrpath-0.13/aclocal.m4
+@@ -1,115 +1,916 @@
+-dnl aclocal.m4 generated automatically by aclocal 1.4-p4
++# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
+
+-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+-dnl This file is free software; the Free Software Foundation
+-dnl gives unlimited permission to copy and/or distribute it,
+-dnl with or without modifications, as long as this notice is preserved.
+-
+-dnl This program is distributed in the hope that it will be useful,
+-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+-dnl PARTICULAR PURPOSE.
+-
+-dnl
+-dnl Add macros
+-dnl JAPHAR_GREP_CFLAGS
+-dnl
+-
+-dnl
+-dnl JAPHAR_GREP_CFLAGS(flag, cmd_if_missing, cmd_if_present)
+-dnl
+-dnl From Japhar. Report changes to japhar at hungry.com
+-dnl
+-AC_DEFUN(JAPHAR_GREP_CFLAGS,
+-[case "$CFLAGS" in
+-"$1" | "$1 "* | *" $1" | *" $1 "* )
+- ifelse($#, 3, [$3], [:])
+- ;;
+-*)
+- $2
+- ;;
+-esac
+-])
+-
+-AC_DEFUN(CHRPATH_LDRPATH_OPTION,
+-[AC_REQUIRE([AC_CANONICAL_TARGET])[]dnl
+-case "$target" in
+- *-linux*)
+- LDRPATH=-Wl,-rpath,
+- ;;
+- *-*-irix*|*-*-osf*)
+- LDRPATH="-rpath "
+- ;;
+- *-*-hpux*)
+- # Hm, this seem to set runpath on ia64, not rpath
+- LDRPATH="-Wl,+b,"
+- ;;
+- *-*-darwin*)
+- # No idea how to add rpath/runpath on Darwin
+- LDRPATH=""
+- ;;
+- *)
+- LDRPATH="-R "
+- ;;
+-esac
+-AC_SUBST(LDRPATH)
+-])
+-
+-# Do all the work for Automake. This macro actually does too much --
+-# some checks are only needed if your package does certain things.
+-# But this isn't really a big deal.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
++# Free Software Foundation, Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++# -*- Autoconf -*-
++# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
++# Generated from amversion.in; do not edit by hand.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION so it can be traced.
++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++ [AM_AUTOMAKE_VERSION([1.8.5])])
++
++# AM_AUX_DIR_EXPAND
++
++# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++])
++
++# AM_CONDITIONAL -*- Autoconf -*-
++
++# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 6
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])
++AC_SUBST([$1_FALSE])
++if $2; then
++ $1_TRUE=
++ $1_FALSE='#'
++else
++ $1_TRUE='#'
++ $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.])
++fi])])
++
++# serial 7 -*- Autoconf -*-
++
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
++# Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+-# serial 1
+
+-dnl Usage:
+-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+-AC_DEFUN(AM_INIT_AUTOMAKE,
+-[AC_REQUIRE([AC_PROG_INSTALL])
+-PACKAGE=[$1]
+-AC_SUBST(PACKAGE)
+-VERSION=[$2]
+-AC_SUBST(VERSION)
+-dnl test to see if srcdir already configured
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "GCJ", or "OBJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
++
++ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
++ [$1], CXX, [depcc="$CXX" am_compiler_list=],
++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
++ [depcc="$$1" am_compiler_list=])
++
++AC_CACHE_CHECK([dependency style of $depcc],
++ [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
++
++ am_cv_$1_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++ fi
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++ # Solaris 8's {/usr,}/bin/sh.
++ touch sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++ case $depmode in
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ none) break ;;
++ esac
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this.
++ if depmode=$depmode \
++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_$1_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_$1_dependencies_compiler_type=none
++fi
++])
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++AM_CONDITIONAL([am__fastdep$1], [
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
++])
++
++
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES
++AC_DEFUN([AM_SET_DEPDIR],
++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
++])
++
++
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE(dependency-tracking,
++[ --disable-dependency-tracking speeds up one-time build
++ --enable-dependency-tracking do not reject slow dependency extractors])
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++fi
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])
++])
++
++# Generate code to set up dependency tracking. -*- Autoconf -*-
++
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++#serial 2
++
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[for mf in $CONFIG_FILES; do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile or not.
++ # We used to match only the files named `Makefile.in', but
++ # some people rename them; so instead we look at the file content.
++ # Grep'ing the first line is not enough: some people post-process
++ # each Makefile.in and add a new line on top of each file to say so.
++ # So let's grep whole file.
++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
++ dirpart=`AS_DIRNAME("$mf")`
++ else
++ continue
++ fi
++ grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
++ # Extract the definition of DEP_FILES from the Makefile without
++ # running `make'.
++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n 's/^U = //p' < "$mf"`
++ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
++ # We invoke sed twice because it is the simplest approach to
++ # changing $(DEPDIR) to its actual value in the expansion.
++ for file in `sed -n '
++ /^DEP_FILES = .*\\\\$/ {
++ s/^DEP_FILES = //
++ :loop
++ s/\\\\$//
++ p
++ n
++ /\\\\$/ b loop
++ p
++ }
++ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`AS_DIRNAME(["$file"])`
++ AS_MKDIR_P([$dirpart/$fdir])
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++done
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
++
++
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking
++# is enabled. FIXME. This creates each `.P' file that we will
++# need in order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
++])
++
++# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 7
++
++# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
++AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
++
++# Do all the work for Automake. -*- Autoconf -*-
++
++# This macro actually does too much some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
++# Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 11
++
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.58])dnl
++dnl Autoconf wants to disallow AM_ names. We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++# test to see if srcdir already configured
++if test "`cd $srcdir && pwd`" != "`pwd`" &&
++ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+-ifelse([$3],,
+-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+-AC_REQUIRE([AM_SANITY_CHECK])
+-AC_REQUIRE([AC_ARG_PROGRAM])
+-dnl FIXME This is truly gross.
+-missing_dir=`cd $ac_aux_dir && pwd`
+-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+-AC_REQUIRE([AC_PROG_MAKE_SET])])
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AM_MISSING_PROG(AMTAR, tar)
++AM_PROG_INSTALL_SH
++AM_PROG_INSTALL_STRIP
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++ [_AM_DEPENDENCIES(CC)],
++ [define([AC_PROG_CC],
++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [_AM_DEPENDENCIES(CXX)],
++ [define([AC_PROG_CXX],
++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++])
++])
++
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. The stamp files are numbered to have different names.
++
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $1 | $1:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
++done
++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++
++# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++install_sh=${install_sh-"$am_aux_dir/install-sh"}
++AC_SUBST(install_sh)])
++
++# -*- Autoconf -*-
++# Copyright (C) 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 1
++
++# Check whether the underlying file-system supports filenames
++# with a leading dot. For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
++
++# Add --enable-maintainer-mode option to configure.
++# From Jim Meyering
++
++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004
++# Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 3
++
++AC_DEFUN([AM_MAINTAINER_MODE],
++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
++ dnl maintainer-mode is disabled by default
++ AC_ARG_ENABLE(maintainer-mode,
++[ --enable-maintainer-mode enable make rules and dependencies not useful
++ (and sometimes confusing) to the casual installer],
++ USE_MAINTAINER_MODE=$enableval,
++ USE_MAINTAINER_MODE=no)
++ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
++ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
++ MAINT=$MAINTAINER_MODE_TRUE
++ AC_SUBST(MAINT)dnl
++]
++)
++
++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
++
++# Check to see how 'make' treats includes. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 2
++
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check to see how make treats includes.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++ @echo done
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++AC_MSG_CHECKING([for style of include used by $am_make])
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
++ am__include=include
++ am__quote=
++ _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ fi
++fi
++AC_SUBST([am__include])
++AC_SUBST([am__quote])
++AC_MSG_RESULT([$_am_result])
++rm -f confinc confmf
++])
++
++# -*- Autoconf -*-
++
++
++# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 3
++
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ AC_MSG_WARN([`missing' script is too old or missing])
++fi
++])
++
++# AM_PROG_MKDIR_P
++# ---------------
++# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
++
++# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
++# created by `make install' are always world readable, even if the
++# installer happens to have an overly restrictive umask (e.g. 077).
++# This was a mistake. There are at least two reasons why we must not
++# use `-m 0755':
++# - it causes special bits like SGID to be ignored,
++# - it may be too restrictive (some setups expect 775 directories).
++#
++# Do not use -m 0755 and let people choose whatever they expect by
++# setting umask.
++#
++# We cannot accept any implementation of `mkdir' that recognizes `-p'.
++# Some implementations (such as Solaris 8's) are not thread-safe: if a
++# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
++# concurrently, both version can detect that a/ is missing, but only
++# one can create it and the other will error out. Consequently we
++# restrict ourselves to GNU make (using the --version option ensures
++# this.)
++AC_DEFUN([AM_PROG_MKDIR_P],
++[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
++ # Keeping the `.' argument allows $(mkdir_p) to be used without
++ # argument. Indeed, we sometimes output rules like
++ # $(mkdir_p) $(somedir)
++ # where $(somedir) is conditionally defined.
++ # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
++ # expensive solution, as it forces Make to start a sub-shell.)
++ mkdir_p='mkdir -p -- .'
++else
++ # On NextStep and OpenStep, the `mkdir' command does not
++ # recognize any option. It will interpret all options as
++ # directories to create, and then abort because `.' already
++ # exists.
++ for d in ./-p ./--version;
++ do
++ test -d $d && rmdir $d
++ done
++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
++ if test -f "$ac_aux_dir/mkinstalldirs"; then
++ mkdir_p='$(mkinstalldirs)'
++ else
++ mkdir_p='$(install_sh) -d'
++ fi
++fi
++AC_SUBST([mkdir_p])])
++
++# Helper functions for option handling. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 2
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ----------------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+ #
+ # Check to make sure that the build environment is sane.
+ #
+
+-AC_DEFUN(AM_SANITY_CHECK,
++# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 3
++
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
+ [AC_MSG_CHECKING([whether build environment is sane])
+ # Just in case
+ sleep 1
+-echo timestamp > conftestfile
++echo timestamp > conftest.file
+ # Do `set' in a subshell so we don't clobber the current shell's
+ # arguments. Must try -L first in case configure is actually a
+ # symlink; some systems play weird games with the mod time of symlinks
+ # (eg FreeBSD returns the mod time of the symlink's containing
+ # directory).
+ if (
+- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+- if test "[$]*" = "X"; then
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++ if test "$[*]" = "X"; then
+ # -L didn't work.
+- set X `ls -t $srcdir/configure conftestfile`
++ set X `ls -t $srcdir/configure conftest.file`
+ fi
+- if test "[$]*" != "X $srcdir/configure conftestfile" \
+- && test "[$]*" != "X conftestfile $srcdir/configure"; then
++ rm -f conftest.file
++ if test "$[*]" != "X $srcdir/configure conftest.file" \
++ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+@@ -119,7 +920,7 @@
+ alias in your environment])
+ fi
+
+- test "[$]2" = conftestfile
++ test "$[2]" = conftest.file
+ )
+ then
+ # Ok.
+@@ -128,78 +929,45 @@
+ AC_MSG_ERROR([newly created file is older than distributed files!
+ Check your system clock])
+ fi
+-rm -f conftest*
+ AC_MSG_RESULT(yes)])
+
+-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+-dnl The program must properly implement --version.
+-AC_DEFUN(AM_MISSING_PROG,
+-[AC_MSG_CHECKING(for working $2)
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if ($2 --version) < /dev/null > /dev/null 2>&1; then
+- $1=$2
+- AC_MSG_RESULT(found)
+-else
+- $1="$3/missing $2"
+- AC_MSG_RESULT(missing)
+-fi
+-AC_SUBST($1)])
++# AM_PROG_INSTALL_STRIP
+
+-# Like AC_CONFIG_HEADER, but automatically create stamp file.
+-
+-AC_DEFUN(AM_CONFIG_HEADER,
+-[AC_PREREQ([2.12])
+-AC_CONFIG_HEADER([$1])
+-dnl When config.status generates a header, we must update the stamp-h file.
+-dnl This file resides in the same directory as the config header
+-dnl that is generated. We must strip everything past the first ":",
+-dnl and everything past the last "/".
+-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+-<<am_indx=1
+-for am_file in <<$1>>; do
+- case " <<$>>CONFIG_HEADERS " in
+- *" <<$>>am_file "*<<)>>
+- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+- ;;
+- esac
+- am_indx=`expr "<<$>>am_indx" + 1`
+-done<<>>dnl>>)
+-changequote([,]))])
++# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+
+-# Add --enable-maintainer-mode option to configure.
+-# From Jim Meyering
+-
+-# serial 1
+-
+-AC_DEFUN(AM_MAINTAINER_MODE,
+-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+- dnl maintainer-mode is disabled by default
+- AC_ARG_ENABLE(maintainer-mode,
+-[ --enable-maintainer-mode enable make rules and dependencies not useful
+- (and sometimes confusing) to the casual installer],
+- USE_MAINTAINER_MODE=$enableval,
+- USE_MAINTAINER_MODE=no)
+- AC_MSG_RESULT($USE_MAINTAINER_MODE)
+- AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+- MAINT=$MAINTAINER_MODE_TRUE
+- AC_SUBST(MAINT)dnl
+-]
+-)
+-
+-# Define a conditional.
+-
+-AC_DEFUN(AM_CONDITIONAL,
+-[AC_SUBST($1_TRUE)
+-AC_SUBST($1_FALSE)
+-if $2; then
+- $1_TRUE=
+- $1_FALSE='#'
+-else
+- $1_TRUE='#'
+- $1_FALSE=
+-fi])
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
++m4_include([acinclude.m4])
+--- chrpath-0.13.orig/config.guess
++++ chrpath-0.13/config.guess
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-# 2000, 2001, 2002 Free Software Foundation, Inc.
++# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+-timestamp='2002-03-20'
++timestamp='2005-08-03'
+
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -17,13 +17,15 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++
+ # Originally written by Per Bothner <per at bothner.com>.
+ # Please send patches to <config-patches at gnu.org>. Submit a context
+ # diff and a properly formatted ChangeLog entry.
+@@ -53,7 +55,7 @@
+ GNU config.guess ($timestamp)
+
+ Originally written by Per Bothner.
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+@@ -66,11 +68,11 @@
+ while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+- echo "$timestamp" ; exit 0 ;;
++ echo "$timestamp" ; exit ;;
+ --version | -v )
+- echo "$version" ; exit 0 ;;
++ echo "$version" ; exit ;;
+ --help | --h* | -h )
+- echo "$usage"; exit 0 ;;
++ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+@@ -88,30 +90,42 @@
+ exit 1
+ fi
+
++trap 'exit 1' 1 2 15
+
+-dummy=dummy-$$
+-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
+
+-# CC_FOR_BUILD -- compiler used by this script.
+ # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+ # use `HOST_CC' if defined, but it is deprecated.
+
+-set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
+- ,,) echo "int dummy(){}" > $dummy.c ;
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
+- if test $? = 0 ; then
++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+- rm -f $dummy.c $dummy.o $dummy.rel ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+-esac'
++esac ; set_cc_for_build= ;'
+
+ # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+ # (ghazi at noc.rutgers.edu 1994-08-24)
+@@ -142,6 +156,7 @@
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
++ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+@@ -167,141 +182,125 @@
+ ;;
+ esac
+ # The OS release
+- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ # Debian GNU/NetBSD machines have a different userland, and
++ # thus, need a distinct triplet. However, they do not need
++ # kernel version information, so it can be replaced with a
++ # suitable tag, in the style of linux-gnu.
++ case "${UNAME_VERSION}" in
++ Debian*)
++ release='-gnu'
++ ;;
++ *)
++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ ;;
++ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+- exit 0 ;;
+- amiga:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- arc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- hp300:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mac68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- macppc:OpenBSD:*:*)
+- echo powerpc-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme88k:OpenBSD:*:*)
+- echo m88k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvmeppc:OpenBSD:*:*)
+- echo powerpc-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- pmax:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- sgi:OpenBSD:*:*)
+- echo mipseb-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- sun3:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- wgrisc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:OpenBSD:*:*)
+- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++ exit ;;
++ *:ekkoBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++ exit ;;
++ macppc:MirBSD:*:*)
++ echo powerppc-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
++ *:MirBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
+ alpha:OSF1:*:*)
+- if test $UNAME_RELEASE = "V4.0"; then
++ case $UNAME_RELEASE in
++ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+- fi
++ ;;
++ *5.*)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++ ;;
++ esac
++ # According to Compaq, /usr/sbin/psrinfo has been available on
++ # OSF/1 and Tru64 systems produced since 1995. I hope that
++ # covers most systems running today. This code pipes the CPU
++ # types through head -n 1, so we only detect the type of CPU 0.
++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++ case "$ALPHA_CPU_TYPE" in
++ "EV4 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "EV4.5 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "LCA4 (21066/21068)")
++ UNAME_MACHINE="alpha" ;;
++ "EV5 (21164)")
++ UNAME_MACHINE="alphaev5" ;;
++ "EV5.6 (21164A)")
++ UNAME_MACHINE="alphaev56" ;;
++ "EV5.6 (21164PC)")
++ UNAME_MACHINE="alphapca56" ;;
++ "EV5.7 (21164PC)")
++ UNAME_MACHINE="alphapca57" ;;
++ "EV6 (21264)")
++ UNAME_MACHINE="alphaev6" ;;
++ "EV6.7 (21264A)")
++ UNAME_MACHINE="alphaev67" ;;
++ "EV6.8CB (21264C)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8AL (21264B)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8CX (21264D)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.9A (21264/EV69A)")
++ UNAME_MACHINE="alphaev69" ;;
++ "EV7 (21364)")
++ UNAME_MACHINE="alphaev7" ;;
++ "EV7.9 (21364A)")
++ UNAME_MACHINE="alphaev79" ;;
++ esac
++ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+- cat <<EOF >$dummy.s
+- .data
+-\$Lformat:
+- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+-
+- .text
+- .globl main
+- .align 4
+- .ent main
+-main:
+- .frame \$30,16,\$26,0
+- ldgp \$29,0(\$27)
+- .prologue 1
+- .long 0x47e03d80 # implver \$0
+- lda \$2,-1
+- .long 0x47e20c21 # amask \$2,\$1
+- lda \$16,\$Lformat
+- mov \$0,\$17
+- not \$1,\$18
+- jsr \$26,printf
+- ldgp \$29,0(\$26)
+- mov 0,\$16
+- jsr \$26,exit
+- .end main
+-EOF
+- eval $set_cc_for_build
+- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- case `./$dummy` in
+- 0-0)
+- UNAME_MACHINE="alpha"
+- ;;
+- 1-0)
+- UNAME_MACHINE="alphaev5"
+- ;;
+- 1-1)
+- UNAME_MACHINE="alphaev56"
+- ;;
+- 1-101)
+- UNAME_MACHINE="alphapca56"
+- ;;
+- 2-303)
+- UNAME_MACHINE="alphaev6"
+- ;;
+- 2-307)
+- UNAME_MACHINE="alphaev67"
+- ;;
+- 2-1307)
+- UNAME_MACHINE="alphaev68"
+- ;;
+- esac
+- fi
+- rm -f $dummy.s $dummy
+- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+- exit 0 ;;
++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++ exit ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+- exit 0 ;;
++ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+- exit 0 ;;
++ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+- exit 0;;
++ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+- exit 0 ;;
++ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+- exit 0 ;;
++ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+- exit 0 ;;
++ exit ;;
++ *:z/VM:*:*)
++ echo s390-ibm-zvmoe
++ exit ;;
++ *:OS400:*:*)
++ echo powerpc-ibm-os400
++ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+- exit 0;;
++ exit ;;
++ arm:riscos:*:*|arm:RISCOS:*:*)
++ echo arm-unknown-riscos
++ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+- exit 0;;
++ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+@@ -309,25 +308,32 @@
+ else
+ echo pyramid-pyramid-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+- exit 0 ;;
++ exit ;;
++ DRS?6000:unix:4.0:6*)
++ echo sparc-icl-nx6
++ exit ;;
++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++ case `/usr/bin/uname -p` in
++ sparc) echo sparc-icl-nx7; exit ;;
++ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+@@ -336,10 +342,10 @@
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+- exit 0 ;;
++ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+@@ -351,10 +357,10 @@
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+- exit 0 ;;
++ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+@@ -365,37 +371,40 @@
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ m68k:machten:*:*)
++ echo m68k-apple-machten${UNAME_RELEASE}
++ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+- exit 0 ;;
++ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+@@ -419,27 +428,33 @@
+ exit (-1);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy \
+- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+- && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c &&
++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++ SYSTEM_NAME=`$dummy $dummyarg` &&
++ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+- exit 0 ;;
++ exit ;;
++ Motorola:*:4.3:PL8-*)
++ echo powerpc-harris-powermax
++ exit ;;
++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++ echo powerpc-harris-powermax
++ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+- exit 0 ;;
++ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+- exit 0 ;;
++ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+- exit 0 ;;
++ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+@@ -455,29 +470,29 @@
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+- exit 0 ;;
++ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+- exit 0 ;;
++ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+- exit 0 ;;
++ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+- exit 0 ;;
++ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+- exit 0 ;;
++ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+- exit 0 ;;
++ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+@@ -485,7 +500,7 @@
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+- exit 0 ;;
++ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+@@ -500,15 +515,18 @@
+ exit(0);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
+- echo rs6000-ibm-aix3.2.5
++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++ then
++ echo "$SYSTEM_NAME"
++ else
++ echo rs6000-ibm-aix3.2.5
++ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+- exit 0 ;;
++ exit ;;
+ *:AIX:*:[45])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+@@ -522,28 +540,28 @@
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+- exit 0 ;;
++ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+- exit 0 ;;
++ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+- exit 0 ;;
++ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+- exit 0 ;; # report: romp-ibm BSD 4.3
++ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+- exit 0 ;;
++ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+- exit 0 ;;
++ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+- exit 0 ;;
++ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+- exit 0 ;;
++ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+@@ -599,17 +617,37 @@
+ exit (0);
+ }
+ EOF
+- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy`
+- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+- rm -f $dummy.c $dummy
@@ Diff output truncated at 100000 characters. @@
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the devel
mailing list