Configuring acpsupsd for CP1500EPFCLCD

[Jean-Pierre Gervasoni]

Dear members,

I have set up a OmniOS box on a HP n54l. I have one issue left for now -
configuring acpupsd to drive a CyberPower CP1500EPFCLCD unit. Here is a
recap of what I did:

- Remove HID, replace by UGEN using following link:

http://www.packetmischief.ca/2013/01/01/installing-apcupsd-with-usb-support-on-omnios/

- Install pkgutil from http://www.opencsw.org/

- Install CSWapcupsd from http://www.opencsw.org/

- Configured /etc/opt/csw/apcsupsd/apcsupsd.conf to make it work with USB
(I have attached the file)

- Running apctest failed with a cryptic error message:

2014-07-06 19:32:36 apctest 3.14.10 (13 September 2011) sun
Checking configuration ...
Attached to driver: usb
sharenet.type = Network & ShareUPS Disabled
cable.type = USB Cable
mode.type = USB UPS Driver
Setting up the port ...
apctest FATAL ERROR in generic-usb.c at line 674
Cannot find UPS device --
For a link to detailed USB trouble shooting information,
please see <http://www.apcupsd.com/support.html>.
apctest error termination completed

- I am attaching apcupsd.trace file

- Here's a copy of log file when i unplug/plug the usb cable:

Jul  6 19:01:02 OmniOS genunix: [ID 408114 kern.info]
/pci at 0,0/pci103c,1609 at 12/input at 5 (ugen0) removed
Jul  6 19:01:42 OmniOS usba: [ID 912658 kern.info] USB 2.0 device
(usb764,501) operating at full speed (USB 1.x) on USB 1.10 root hub:
input at 5, ugen0 at bus address 2
Jul  6 19:01:42 OmniOS usba: [ID 349649 kern.info] 	CP1500EPFCLCD RJB103.551 CPS
Jul  6 19:01:42 OmniOS genunix: [ID 936769 kern.info] ugen0 is
/pci at 0,0/pci103c,1609 at 12/input at 5
Jul  6 19:01:42 OmniOS genunix: [ID 408114 kern.info]
/pci at 0,0/pci103c,1609 at 12/input at 5 (ugen0) online


- I'm kind of lost for now.....

Thank you for any help you could provide,

Jean-Pierre
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20140706/99a3b064/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: apcupsd.conf
Type: application/octet-stream
Size: 12874 bytes
Desc: not available
URL: <http://lists.opencsw.org/pipermail/users/attachments/20140706/99a3b064/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: apcupsd.trace
Type: application/octet-stream
Size: 3960 bytes
Desc: not available
URL: <http://lists.opencsw.org/pipermail/users/attachments/20140706/99a3b064/attachment-0003.obj>