From noreply at opencsw.org Thu Mar 1 09:03:08 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 1 Mar 2012 09:03:08 +0100 Subject: [bug-notifications] [pythonsvn 0004846]: trac is broken by the version 1.7.0_rc4, REV=2011.10.09 In-Reply-To: Message-ID: <705236959c7da5d6f7e44f77fd344c2d@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4846 ====================================================================== Reported By: schwindt Assigned To: ====================================================================== Project: pythonsvn Issue ID: 4846 Category: packaging Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-10-18 23:40 CEST Last Modified: 2012-03-01 09:03 CET ====================================================================== Summary: trac is broken by the version 1.7.0_rc4,REV=2011.10.09 Description: after the upgrade trac stops displaying the repositories. The python module svn is not found anymore The error displayed Warning: Can't synchronize with repository "(default)" (Unsupported version control system "svn": No module named svn). Look in the Trac log for more information. The trac log looks like this 2011-10-18 23:38:50,818 Trac[svn_fs] INFO: Failed to load Subversion bindings Traceback (most recent call last): File "/opt/csw/lib/python/site-packages/trac/versioncontrol/svn_fs.py", line 267, in __init__ _import_svn() File "/opt/csw/lib/python/site-packages/trac/versioncontrol/svn_fs.py", line 68, in _import_svn from svn import fs, repos, core, delta ImportError: No module named svn ====================================================================== ---------------------------------------------------------------------- (0009697) schwindt (developer) - 2012-03-01 09:03 https://www.opencsw.org/mantis/view.php?id=4846#c9697 ---------------------------------------------------------------------- It indeed does , but the package layout changed a bit. after doing a rsync -av /opt/csw/lib/svn/python/site-packages/ /opt/csw/lib/python/site-packages/ python was able to use it again. It this behaviour intendet ? From noreply at opencsw.org Fri Mar 2 02:37:38 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 02:37:38 +0100 Subject: [bug-notifications] [php5 0004911]: session_cache_limiter() is undefined in php5.3.10 In-Reply-To: Message-ID: <957d187ee18117ec5bfe0721ae2a16a6@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4911 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4911 Category: regular use Reproducibility: always Severity: block Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-02-28 01:43 CET Last Modified: 2012-03-02 02:37 CET ====================================================================== Summary: session_cache_limiter() is undefined in php5.3.10 Description: Mantis triggers the message "PHP Fatal error: Call to undefined function session_cache_limiter() in /opt/csw/share/www/mantis/htdocs/core/session_api.php on line 107" after upgrading php5 to 5.3.10,REV=2012.02.10 ====================================================================== ---------------------------------------------------------------------- (0009698) bwalton (administrator) - 2012-03-02 02:37 https://www.opencsw.org/mantis/view.php?id=4911#c9698 ---------------------------------------------------------------------- The template php.ini file now contains the line for loadable session.so support. That should prevent this issue on clean installs. From noreply at opencsw.org Fri Mar 2 02:38:23 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 02:38:23 +0100 Subject: [bug-notifications] [php5_session 0004905]: php5_session does not enable because there is a bug in the php.ini In-Reply-To: <5dd394ac1d136ec007562674b53b525c> Message-ID: The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4905 ====================================================================== Reported By: jh Assigned To: bwalton ====================================================================== Project: php5_session Issue ID: 4905 Category: regular use Reproducibility: always Severity: major Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-02-23 11:08 CET Last Modified: 2012-03-02 02:38 CET ====================================================================== Summary: php5_session does not enable because there is a bug in the php.ini Description: php.ini does have extension = session and not extension=session.so so the module is not loaded. ====================================================================== ---------------------------------------------------------------------- (0009699) bwalton (administrator) - 2012-03-02 02:38 https://www.opencsw.org/mantis/view.php?id=4905#c9699 ---------------------------------------------------------------------- I've added session.so module support to the template php.ini which should prevent problems like this on fresh installs. From noreply at opencsw.org Fri Mar 2 03:57:45 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 03:57:45 +0100 Subject: [bug-notifications] [orca_web 0004914]: orca fails to generate text due to pango version mismatch Message-ID: <348b1c4cafc119ad6f1a486bdfa191b0@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4914 ====================================================================== Reported By: hudesd Assigned To: ====================================================================== Project: orca_web Issue ID: 4914 Category: regular use Reproducibility: always Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-02 03:57 CET Last Modified: 2012-03-02 03:57 CET ====================================================================== Summary: orca fails to generate text due to pango version mismatch Description: I finally figured out why my orca plots are now with 'ugly' text (boxes instead of characters). The orca.log has lots of lines like these: (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2293: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: file gobject.c: line 819: assertion `G_TYPE_IS_OBJECT (object_type)' failed (process:8500): Pango-WARNING **: Failed to load Pango module '/usr/lib/pango/1.4.0/modules/pango-basic-fc.so' for id 'BasicScriptEngineFc' Note the reference to pango 1.4.0. The current installed version of pango 1.6.0 Orca shouldn't be directly referring to a specific version of pango. I'll continue to dig into this it may be a pm_pango issue. ====================================================================== From noreply at opencsw.org Fri Mar 2 10:21:17 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 10:21:17 +0100 Subject: [bug-notifications] [orca_web 0004914]: orca fails to generate text due to pango version mismatch In-Reply-To: Message-ID: <82275c4003b06bf0db6e461521f5c331@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4914 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4914 Category: regular use Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-02 03:57 CET Last Modified: 2012-03-02 10:21 CET ====================================================================== Summary: orca fails to generate text due to pango version mismatch Description: I finally figured out why my orca plots are now with 'ugly' text (boxes instead of characters). The orca.log has lots of lines like these: (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2293: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: file gobject.c: line 819: assertion `G_TYPE_IS_OBJECT (object_type)' failed (process:8500): Pango-WARNING **: Failed to load Pango module '/usr/lib/pango/1.4.0/modules/pango-basic-fc.so' for id 'BasicScriptEngineFc' Note the reference to pango 1.4.0. The current installed version of pango 1.6.0 Orca shouldn't be directly referring to a specific version of pango. I'll continue to dig into this it may be a pm_pango issue. ====================================================================== From noreply at opencsw.org Fri Mar 2 10:25:33 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 10:25:33 +0100 Subject: [bug-notifications] [orca_web 0004914]: orca fails to generate text due to pango version mismatch In-Reply-To: Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4914 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4914 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-02 03:57 CET Last Modified: 2012-03-02 10:25 CET ====================================================================== Summary: orca fails to generate text due to pango version mismatch Description: I finally figured out why my orca plots are now with 'ugly' text (boxes instead of characters). The orca.log has lots of lines like these: (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2293: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: file gobject.c: line 819: assertion `G_TYPE_IS_OBJECT (object_type)' failed (process:8500): Pango-WARNING **: Failed to load Pango module '/usr/lib/pango/1.4.0/modules/pango-basic-fc.so' for id 'BasicScriptEngineFc' Note the reference to pango 1.4.0. The current installed version of pango 1.6.0 Orca shouldn't be directly referring to a specific version of pango. I'll continue to dig into this it may be a pm_pango issue. ====================================================================== ---------------------------------------------------------------------- (0009700) dam (administrator) - 2012-03-02 10:25 https://www.opencsw.org/mantis/view.php?id=4914#c9700 ---------------------------------------------------------------------- I note the /usr/lib/pango. orca_web is built completely against OpenCSW packages, please see the dependency graph at the bottom: http://www.opencsw.org/qa/package/orca_web/ Do you have LD_LIBRARY_PATH set or similar crle setting? Please verify the RRD library bindings, it should look similar to this: unstable9s% ldd -r /opt/csw/lib/librrd.so.4 /usr/lib/secure/s9_preload.so.1 libxml2.so.2 => /opt/csw/lib/sparcv8/libxml2.so.2 libm.so.1 => /usr/lib/libm.so.1 libsocket.so.1 => /usr/lib/libsocket.so.1 libdbi.so.1 => /opt/csw/lib/sparcv8/libdbi.so.1 libdl.so.1 => /usr/lib/libdl.so.1 libwrap.so.1 => /opt/csw/lib/sparcv8/libwrap.so.1 libpangocairo-1.0.so.0 => /opt/csw/lib/sparcv8/libpangocairo-1.0.so.0 libpango-1.0.so.0 => /opt/csw/lib/sparcv8/libpango-1.0.so.0 libcairo.so.2 => /opt/csw/lib/sparcv8/libcairo.so.2 libgobject-2.0.so.0 => /opt/csw/lib/sparcv8/libgobject-2.0.so.0 libgmodule-2.0.so.0 => /opt/csw/lib/sparcv8/libgmodule-2.0.so.0 libgthread-2.0.so.0 => /opt/csw/lib/sparcv8/libgthread-2.0.so.0 libpthread.so.1 => /usr/lib/libpthread.so.1 libthread.so.1 => /usr/lib/libthread.so.1 librt.so.1 => /usr/lib/librt.so.1 libglib-2.0.so.0 => /opt/csw/lib/sparcv8/libglib-2.0.so.0 libintl.so.8 => /opt/csw/lib/sparcv8/libintl.so.8 libc.so.1 => /usr/lib/libc.so.1 libz.so.1 => /opt/csw/lib/sparcv8plus+vis/libz.so.1 libiconv.so.2 => /opt/csw/lib/sparcv8/libiconv.so.2 libnsl.so.1 => /usr/lib/libnsl.so.1 libpangoft2-1.0.so.0 => /opt/csw/lib/sparcv8/libpangoft2-1.0.so.0 libfreetype.so.6 => /opt/csw/lib/sparcv8/libfreetype.so.6 libfontconfig.so.1 => /opt/csw/lib/sparcv8/libfontconfig.so.1 libpixman-1.so.0 => /opt/csw/lib/sparcv8/libpixman-1.so.0 libpng12.so.0 => /opt/csw/lib/sparcv8plus+vis2/libpng12.so.0 libXrender.so.1 => /opt/csw/lib/sparcv8/libXrender.so.1 libX11.so.4 => /usr/lib/libX11.so.4 libaio.so.1 => /usr/lib/libaio.so.1 libmd5.so.1 => /usr/lib/libmd5.so.1 libmp.so.2 => /usr/lib/libmp.so.2 libbz2.so.1.0 => /opt/csw/lib/sparcv8/libbz2.so.1.0 libexpat.so.1 => /opt/csw/lib/sparcv8/libexpat.so.1 libXext.so.0 => /usr/openwin/lib/libXext.so.0 /usr/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1 From noreply at opencsw.org Fri Mar 2 18:26:23 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 18:26:23 +0100 Subject: [bug-notifications] [orca_web 0004914]: orca fails to generate text due to pango version mismatch In-Reply-To: Message-ID: <0154623f0d1e9eae9b1c84d5f45a1921@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4914 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4914 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-02 03:57 CET Last Modified: 2012-03-02 18:26 CET ====================================================================== Summary: orca fails to generate text due to pango version mismatch Description: I finally figured out why my orca plots are now with 'ugly' text (boxes instead of characters). The orca.log has lots of lines like these: (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2293: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: file gobject.c: line 819: assertion `G_TYPE_IS_OBJECT (object_type)' failed (process:8500): Pango-WARNING **: Failed to load Pango module '/usr/lib/pango/1.4.0/modules/pango-basic-fc.so' for id 'BasicScriptEngineFc' Note the reference to pango 1.4.0. The current installed version of pango 1.6.0 Orca shouldn't be directly referring to a specific version of pango. I'll continue to dig into this it may be a pm_pango issue. ====================================================================== ---------------------------------------------------------------------- (0009701) hudesd (reporter) - 2012-03-02 18:26 https://www.opencsw.org/mantis/view.php?id=4914#c9701 ---------------------------------------------------------------------- Hmm. As I have a test system (local zone) for this with nothing else on it, I am uninstalling everything CSW and re-installing orca_web and setoolkit. Will report back... From noreply at opencsw.org Fri Mar 2 20:09:28 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 20:09:28 +0100 Subject: [bug-notifications] [orca_web 0004915]: installation doesn't create web directory Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4915 ====================================================================== Reported By: hudesd Assigned To: ====================================================================== Project: orca_web Issue ID: 4915 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-02 20:09 CET Last Modified: 2012-03-02 20:09 CET ====================================================================== Summary: installation doesn't create web directory Description: I removed all CSW packages (other than pkgutil) and cleaned out all directories of everything not related to pkgutil. I explicitly removed the /opt/csw/share/www/orca directory as well, to present a truly clean install environment. "/opt/csw/bin/orca: error: please create html_dir '/opt/csw/share/www/orca/orcallator'." I can do that but I would expect the install script to create whatever directory it wants. ====================================================================== From noreply at opencsw.org Fri Mar 2 20:42:41 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 2 Mar 2012 20:42:41 +0100 Subject: [bug-notifications] [orca_web 0004915]: installation doesn't create web directory In-Reply-To: Message-ID: <41471b61510459bae42eced96031982e@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4915 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4915 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-02 20:09 CET Last Modified: 2012-03-02 20:42 CET ====================================================================== Summary: installation doesn't create web directory Description: I removed all CSW packages (other than pkgutil) and cleaned out all directories of everything not related to pkgutil. I explicitly removed the /opt/csw/share/www/orca directory as well, to present a truly clean install environment. "/opt/csw/bin/orca: error: please create html_dir '/opt/csw/share/www/orca/orcallator'." I can do that but I would expect the install script to create whatever directory it wants. ====================================================================== From noreply at opencsw.org Sun Mar 4 18:17:42 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 4 Mar 2012 18:17:42 +0100 Subject: [bug-notifications] [pysvn 0004902]: pysvn and/or pythonsvn not functional In-Reply-To: Message-ID: <6796df73bdedd8ac67ccc7b3d2f59da1@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4902 ====================================================================== Reported By: joeymukherjee Assigned To: dam ====================================================================== Project: pysvn Issue ID: 4902 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-02-21 20:09 CET Last Modified: 2012-03-04 18:17 CET ====================================================================== Summary: pysvn and/or pythonsvn not functional Description: In the Solaris 9 build, the pysvn and pythonsvn do not have core.py with them. This makes the SVN python libs useless. The command I am trying to get working is: >>> from svn import core Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/svn/core.py", line 19, in File "/opt/csw/lib/python/site-packages/libsvn/core.py", line 7, in ImportError: No module named _core ====================================================================== ---------------------------------------------------------------------- (0009703) maciej (manager) - 2012-03-04 18:17 https://www.opencsw.org/mantis/view.php?id=4902#c9703 ---------------------------------------------------------------------- Ref: http://lists.opencsw.org/pipermail/maintainers/2012-March/016163.html From noreply at opencsw.org Sun Mar 4 21:55:10 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 4 Mar 2012 21:55:10 +0100 Subject: [bug-notifications] [pysvn 0004902]: pysvn and/or pythonsvn not functional In-Reply-To: Message-ID: <8e960915e87fb683c67596b922b75dec@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4902 ====================================================================== Reported By: joeymukherjee Assigned To: dam ====================================================================== Project: pysvn Issue ID: 4902 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-02-21 20:09 CET Last Modified: 2012-03-04 21:55 CET ====================================================================== Summary: pysvn and/or pythonsvn not functional Description: In the Solaris 9 build, the pysvn and pythonsvn do not have core.py with them. This makes the SVN python libs useless. The command I am trying to get working is: >>> from svn import core Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/svn/core.py", line 19, in File "/opt/csw/lib/python/site-packages/libsvn/core.py", line 7, in ImportError: No module named _core ====================================================================== ---------------------------------------------------------------------- (0009704) dam (administrator) - 2012-03-04 21:55 https://www.opencsw.org/mantis/view.php?id=4902#c9704 ---------------------------------------------------------------------- Is it sufficient to just relocate the python files? Then we could use relocation during merge avoiding the complexity to fully dive into the build system, but just fit the install location to our needs? From noreply at opencsw.org Sun Mar 4 21:56:47 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 4 Mar 2012 21:56:47 +0100 Subject: [bug-notifications] [pysvn 0004902]: pysvn and/or pythonsvn not functional In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4902 ====================================================================== Reported By: joeymukherjee Assigned To: dam ====================================================================== Project: pysvn Issue ID: 4902 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-02-21 20:09 CET Last Modified: 2012-03-04 21:56 CET ====================================================================== Summary: pysvn and/or pythonsvn not functional Description: In the Solaris 9 build, the pysvn and pythonsvn do not have core.py with them. This makes the SVN python libs useless. The command I am trying to get working is: >>> from svn import core Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/svn/core.py", line 19, in File "/opt/csw/lib/python/site-packages/libsvn/core.py", line 7, in ImportError: No module named _core ====================================================================== ---------------------------------------------------------------------- (0009705) maciej (manager) - 2012-03-04 21:56 https://www.opencsw.org/mantis/view.php?id=4902#c9705 ---------------------------------------------------------------------- It could be sufficient, it's certainly worth a try. From noreply at opencsw.org Sun Mar 4 22:02:03 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 4 Mar 2012 22:02:03 +0100 Subject: [bug-notifications] [pysvn 0004902]: pysvn and/or pythonsvn not functional In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4902 ====================================================================== Reported By: joeymukherjee Assigned To: dam ====================================================================== Project: pysvn Issue ID: 4902 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-02-21 20:09 CET Last Modified: 2012-03-04 22:02 CET ====================================================================== Summary: pysvn and/or pythonsvn not functional Description: In the Solaris 9 build, the pysvn and pythonsvn do not have core.py with them. This makes the SVN python libs useless. The command I am trying to get working is: >>> from svn import core Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/svn/core.py", line 19, in File "/opt/csw/lib/python/site-packages/libsvn/core.py", line 7, in ImportError: No module named _core ====================================================================== ---------------------------------------------------------------------- (0009706) dam (administrator) - 2012-03-04 22:02 https://www.opencsw.org/mantis/view.php?id=4902#c9706 ---------------------------------------------------------------------- Coud you please try and move the files manually for now? I'll happily add the relocations to the Makefile then. From noreply at opencsw.org Sun Mar 4 22:24:46 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 4 Mar 2012 22:24:46 +0100 Subject: [bug-notifications] [pysvn 0004902]: pysvn and/or pythonsvn not functional In-Reply-To: Message-ID: <4e94be176b93016b8e8d49fef0486fc1@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4902 ====================================================================== Reported By: joeymukherjee Assigned To: dam ====================================================================== Project: pysvn Issue ID: 4902 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-02-21 20:09 CET Last Modified: 2012-03-04 22:24 CET ====================================================================== Summary: pysvn and/or pythonsvn not functional Description: In the Solaris 9 build, the pysvn and pythonsvn do not have core.py with them. This makes the SVN python libs useless. The command I am trying to get working is: >>> from svn import core Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/svn/core.py", line 19, in File "/opt/csw/lib/python/site-packages/libsvn/core.py", line 7, in ImportError: No module named _core ====================================================================== ---------------------------------------------------------------------- (0009707) maciej (manager) - 2012-03-04 22:24 https://www.opencsw.org/mantis/view.php?id=4902#c9707 ---------------------------------------------------------------------- Just checked that to work around it, it's enough to make two symlinks: sudo ln -s ../../svn/python/site-packages/svn /opt/csw/lib/python/site-packages/svn sudo ln -s ../../svn/python/site-packages/libsvn /opt/csw/lib/python/site-packages/libsvn This is after package installation. I suppose that something similar could be made in the package, until we find a better solution. From noreply at opencsw.org Mon Mar 5 18:15:45 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 5 Mar 2012 18:15:45 +0100 Subject: [bug-notifications] [orca_web 0004914]: orca fails to generate text due to pango version mismatch In-Reply-To: Message-ID: <3bf944ca0be5fbabd9fcf034f23afcd7@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4914 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4914 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-02 03:57 CET Last Modified: 2012-03-05 18:15 CET ====================================================================== Summary: orca fails to generate text due to pango version mismatch Description: I finally figured out why my orca plots are now with 'ugly' text (boxes instead of characters). The orca.log has lots of lines like these: (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2253: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: gtype.c:2293: initialization assertion failed, use g_type_init() prior to this function (process:8500): GLib-GObject-CRITICAL **: file gobject.c: line 819: assertion `G_TYPE_IS_OBJECT (object_type)' failed (process:8500): Pango-WARNING **: Failed to load Pango module '/usr/lib/pango/1.4.0/modules/pango-basic-fc.so' for id 'BasicScriptEngineFc' Note the reference to pango 1.4.0. The current installed version of pango 1.6.0 Orca shouldn't be directly referring to a specific version of pango. I'll continue to dig into this it may be a pm_pango issue. ====================================================================== ---------------------------------------------------------------------- (0009708) hudesd (reporter) - 2012-03-05 18:15 https://www.opencsw.org/mantis/view.php?id=4914#c9708 ---------------------------------------------------------------------- removing everything CSW except pkgutil and then reinstalling cleared the problem. It seems related to upgrading pango. From noreply at opencsw.org Wed Mar 7 19:06:22 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 7 Mar 2012 19:06:22 +0100 Subject: [bug-notifications] [orcallator 0004916]: orcallator fails for MAX_COLUMNS Message-ID: <862d967ec54ec28f3da90dfc7503f708@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4916 ====================================================================== Reported By: hudesd Assigned To: ====================================================================== Project: orcallator Issue ID: 4916 Category: regular use Reproducibility: always Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-07 19:06 CET Last Modified: 2012-03-07 19:06 CET ====================================================================== Summary: orcallator fails for MAX_COLUMNS Description: On startup on one large host, "/opt/csw/lib/orca/orcallator.se: too many columns (2048). Increase MAX_COLUMNS." Host is "SunOS sundat0 5.9 Generic_122300-41 sun4u sparc SUNW,Sun-Fire-15000" which in reality is Sun Microsystems sun4u Sun Fire E25K System clock frequency: 150 MHz Memory size: 131072 Megabytes CPUs are 1500 MHz. This is a clean install, I removed all CSW packages then installed orcallator (and pkgutil). PKGINST: CSWorcallator NAME: orcallator - Orcallator performance data collector CATEGORY: application ARCH: all VERSION: ef85fa3541,REV=2011.11.28 VENDOR: https://github.com/blair/orca packaged for CSW by Dagobert Michelsen PSTAMP: dam at unstable9x-20111128130525 INSTDATE: Mar 06 2012 20:47 HOTLINE: http://www.opencsw.org/bugtrack/ EMAIL: dam at opencsw.org STATUS: completely installed FILES: 17 installed pathnames 1 shared pathnames 3 directories 6 executables 208 blocks used (approx ====================================================================== From noreply at opencsw.org Thu Mar 8 15:28:56 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 15:28:56 +0100 Subject: [bug-notifications] [orcallator 0004916]: orcallator fails for MAX_COLUMNS In-Reply-To: <60ceae938fd2c53072ab0cb1c6c79755> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4916 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orcallator Issue ID: 4916 Category: regular use Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-07 19:06 CET Last Modified: 2012-03-08 15:28 CET ====================================================================== Summary: orcallator fails for MAX_COLUMNS Description: On startup on one large host, "/opt/csw/lib/orca/orcallator.se: too many columns (2048). Increase MAX_COLUMNS." Host is "SunOS sundat0 5.9 Generic_122300-41 sun4u sparc SUNW,Sun-Fire-15000" which in reality is Sun Microsystems sun4u Sun Fire E25K System clock frequency: 150 MHz Memory size: 131072 Megabytes CPUs are 1500 MHz. This is a clean install, I removed all CSW packages then installed orcallator (and pkgutil). PKGINST: CSWorcallator NAME: orcallator - Orcallator performance data collector CATEGORY: application ARCH: all VERSION: ef85fa3541,REV=2011.11.28 VENDOR: https://github.com/blair/orca packaged for CSW by Dagobert Michelsen PSTAMP: dam at unstable9x-20111128130525 INSTDATE: Mar 06 2012 20:47 HOTLINE: http://www.opencsw.org/bugtrack/ EMAIL: dam at opencsw.org STATUS: completely installed FILES: 17 installed pathnames 1 shared pathnames 3 directories 6 executables 208 blocks used (approx ====================================================================== From noreply at opencsw.org Thu Mar 8 15:42:10 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 15:42:10 +0100 Subject: [bug-notifications] [orcallator 0004916]: orcallator fails for MAX_COLUMNS In-Reply-To: <60ceae938fd2c53072ab0cb1c6c79755> Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4916 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orcallator Issue ID: 4916 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-07 19:06 CET Last Modified: 2012-03-08 15:42 CET ====================================================================== Summary: orcallator fails for MAX_COLUMNS Description: On startup on one large host, "/opt/csw/lib/orca/orcallator.se: too many columns (2048). Increase MAX_COLUMNS." Host is "SunOS sundat0 5.9 Generic_122300-41 sun4u sparc SUNW,Sun-Fire-15000" which in reality is Sun Microsystems sun4u Sun Fire E25K System clock frequency: 150 MHz Memory size: 131072 Megabytes CPUs are 1500 MHz. This is a clean install, I removed all CSW packages then installed orcallator (and pkgutil). PKGINST: CSWorcallator NAME: orcallator - Orcallator performance data collector CATEGORY: application ARCH: all VERSION: ef85fa3541,REV=2011.11.28 VENDOR: https://github.com/blair/orca packaged for CSW by Dagobert Michelsen PSTAMP: dam at unstable9x-20111128130525 INSTDATE: Mar 06 2012 20:47 HOTLINE: http://www.opencsw.org/bugtrack/ EMAIL: dam at opencsw.org STATUS: completely installed FILES: 17 installed pathnames 1 shared pathnames 3 directories 6 executables 208 blocks used (approx ====================================================================== ---------------------------------------------------------------------- (0009709) dam (administrator) - 2012-03-08 15:42 https://www.opencsw.org/mantis/view.php?id=4916#c9709 ---------------------------------------------------------------------- In file /opt/csw/lib/orca/orcallator.se please try to adjust the line #define MAX_COLUMNS 2048 to some higher value (e.g. 4096) and see if this fully fixes the issue. I can then reroll the package. From noreply at opencsw.org Thu Mar 8 16:42:57 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 16:42:57 +0100 Subject: [bug-notifications] [orcallator 0004916]: orcallator fails for MAX_COLUMNS In-Reply-To: <60ceae938fd2c53072ab0cb1c6c79755> Message-ID: <199993b7e9a0dbdbdc57c9cc799c7c0c@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4916 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orcallator Issue ID: 4916 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-07 19:06 CET Last Modified: 2012-03-08 16:42 CET ====================================================================== Summary: orcallator fails for MAX_COLUMNS Description: On startup on one large host, "/opt/csw/lib/orca/orcallator.se: too many columns (2048). Increase MAX_COLUMNS." Host is "SunOS sundat0 5.9 Generic_122300-41 sun4u sparc SUNW,Sun-Fire-15000" which in reality is Sun Microsystems sun4u Sun Fire E25K System clock frequency: 150 MHz Memory size: 131072 Megabytes CPUs are 1500 MHz. This is a clean install, I removed all CSW packages then installed orcallator (and pkgutil). PKGINST: CSWorcallator NAME: orcallator - Orcallator performance data collector CATEGORY: application ARCH: all VERSION: ef85fa3541,REV=2011.11.28 VENDOR: https://github.com/blair/orca packaged for CSW by Dagobert Michelsen PSTAMP: dam at unstable9x-20111128130525 INSTDATE: Mar 06 2012 20:47 HOTLINE: http://www.opencsw.org/bugtrack/ EMAIL: dam at opencsw.org STATUS: completely installed FILES: 17 installed pathnames 1 shared pathnames 3 directories 6 executables 208 blocks used (approx ====================================================================== ---------------------------------------------------------------------- (0009710) hudesd (reporter) - 2012-03-08 16:42 https://www.opencsw.org/mantis/view.php?id=4916#c9710 ---------------------------------------------------------------------- 4096 seems to have done it. Thanks. From noreply at opencsw.org Thu Mar 8 16:46:04 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 16:46:04 +0100 Subject: [bug-notifications] [orca_web 0004917]: 'Too many open files' Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4917 ====================================================================== Reported By: hudesd Assigned To: ====================================================================== Project: orca_web Issue ID: 4917 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-08 16:46 CET Last Modified: 2012-03-08 16:46 CET ====================================================================== Summary: 'Too many open files' Description: /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-quarterly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-yearly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-all.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_sun5240151_gauge_nxge7Ipkt_per_s,__nxge7Opkt_per_s.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-hourly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-daily.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-weekly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-monthly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-quarterly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-yearly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-all.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_auto65_gauge_qfe0Ipkt_per_s,__qfe0Opkt_per_s.html.htm' for writing: Too many open files. (there's more...) ====================================================================== From noreply at opencsw.org Thu Mar 8 16:50:29 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 16:50:29 +0100 Subject: [bug-notifications] [orca_web 0004918]: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." Message-ID: <0942ab24c6c6786b4611cd558b68a63f@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4918 ====================================================================== Reported By: hudesd Assigned To: ====================================================================== Project: orca_web Issue ID: 4918 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-08 16:50 CET Last Modified: 2012-03-08 16:50 CET ====================================================================== Summary: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." Description: OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png' OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png' ====================================================================== From noreply at opencsw.org Thu Mar 8 20:26:17 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 20:26:17 +0100 Subject: [bug-notifications] [orca_web 0004917]: 'Too many open files' In-Reply-To: <29ceab0b486ed92c55b5547e87d9d1c7> Message-ID: <7c7048dfc2e02d1e22e069a6e67a44c6@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4917 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4917 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-08 16:46 CET Last Modified: 2012-03-08 20:26 CET ====================================================================== Summary: 'Too many open files' Description: /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-quarterly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-yearly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-all.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_sun5240151_gauge_nxge7Ipkt_per_s,__nxge7Opkt_per_s.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-hourly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-daily.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-weekly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-monthly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-quarterly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-yearly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-all.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_auto65_gauge_qfe0Ipkt_per_s,__qfe0Opkt_per_s.html.htm' for writing: Too many open files. (there's more...) ====================================================================== From noreply at opencsw.org Thu Mar 8 20:26:52 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 20:26:52 +0100 Subject: [bug-notifications] [orca_web 0004917]: 'Too many open files' In-Reply-To: <29ceab0b486ed92c55b5547e87d9d1c7> Message-ID: <54087b8b13b188c958888f3cf55ccb4f@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4917 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4917 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-08 16:46 CET Last Modified: 2012-03-08 20:26 CET ====================================================================== Summary: 'Too many open files' Description: /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-quarterly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-yearly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_nxge7Ipkt_per_s,o_gauge_nxge7Opkt_per_s-all.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_sun5240151_gauge_nxge7Ipkt_per_s,__nxge7Opkt_per_s.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-hourly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-daily.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-weekly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-monthly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-quarterly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-yearly.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_gauge_qfe0Ipkt_per_s,o_gauge_qfe0Opkt_per_s-all.html.htm' for writing: Too many open files. /opt/csw/bin/orca: warning: cannot create Orca::HTMLFile object: cannot open '/opt/csw/share/www/orca/orcallator/o_auto65_gauge_qfe0Ipkt_per_s,__qfe0Opkt_per_s.html.htm' for writing: Too many open files. (there's more...) ====================================================================== ---------------------------------------------------------------------- (0009711) dam (administrator) - 2012-03-08 20:26 https://www.opencsw.org/mantis/view.php?id=4917#c9711 ---------------------------------------------------------------------- This is explained in the FAQ: https://github.com/blair/orca/blob/master/FAQ#L263 Please see if this fixes your issue. From noreply at opencsw.org Thu Mar 8 20:28:41 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 20:28:41 +0100 Subject: [bug-notifications] [orca_web 0004918]: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4918 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4918 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-08 16:50 CET Last Modified: 2012-03-08 20:28 CET ====================================================================== Summary: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." Description: OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png' OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png' ====================================================================== From noreply at opencsw.org Thu Mar 8 20:29:05 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 20:29:05 +0100 Subject: [bug-notifications] [orca_web 0004918]: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." In-Reply-To: Message-ID: <101561296629f6d9d8c36832c9cdfb64@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4918 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4918 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-08 16:50 CET Last Modified: 2012-03-08 20:29 CET ====================================================================== Summary: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." Description: OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png' OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png' ====================================================================== ---------------------------------------------------------------------- (0009712) dam (administrator) - 2012-03-08 20:29 https://www.opencsw.org/mantis/view.php?id=4918#c9712 ---------------------------------------------------------------------- Is this related to https://www.opencsw.org/mantis/view.php?id=4914 ? From noreply at opencsw.org Thu Mar 8 20:48:04 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 8 Mar 2012 20:48:04 +0100 Subject: [bug-notifications] [orca_web 0004918]: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." In-Reply-To: Message-ID: <2a83959538f807c94bfa1f3e8d90ff6e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4918 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4918 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-08 16:50 CET Last Modified: 2012-03-08 20:48 CET ====================================================================== Summary: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." Description: OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png' OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png' ====================================================================== ---------------------------------------------------------------------- (0009713) hudesd (reporter) - 2012-03-08 20:48 https://www.opencsw.org/mantis/view.php?id=4918#c9713 ---------------------------------------------------------------------- No, not related any other ticket I've opened. When I re-installed CSW* I first removed everything including log files. This is choking on data from a host other than the one complained about MAX_COLUMNS. The 'sundat1' host data is for a Solaris 9 host, one which is a reasonably busy place. This is, so far, the only host to cause such complaints. From noreply at opencsw.org Fri Mar 9 09:47:28 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 9 Mar 2012 09:47:28 +0100 Subject: [bug-notifications] [orca_web 0004918]: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." In-Reply-To: Message-ID: <69f066655abdee54b8d1797f88e4b66b@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4918 ====================================================================== Reported By: hudesd Assigned To: dam ====================================================================== Project: orca_web Issue ID: 4918 Category: regular use Reproducibility: sometimes Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-08 16:50 CET Last Modified: 2012-03-09 09:47 CET ====================================================================== Summary: "Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc." Description: OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-hourly.png' OOPS: Cairo has issues it can't even die: invalid value (typically too big) for the size of the input (surface, pattern, etc.) /opt/csw/bin/orca: warning: cannot create '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png': Could not save png to '/opt/csw/share/www/orca/orcallator/sundat1/o_sundat1_gauge_volatile_mntP_(._X_)-daily.png' ====================================================================== ---------------------------------------------------------------------- (0009714) dam (administrator) - 2012-03-09 09:47 https://www.opencsw.org/mantis/view.php?id=4918#c9714 ---------------------------------------------------------------------- There are some possible causes reported in http://oss.oetiker.ch/rrdtool-trac/ticket/270 Could you especially check for these? - imgformat is any of SVG|EPS|PDF - rrdgraph tries to write into a file where it doesn't have write permissions - after eating up 2GB process limit From noreply at opencsw.org Sat Mar 10 19:09:22 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 10 Mar 2012 19:09:22 +0100 Subject: [bug-notifications] [sudo 0004919]: Wrong permissions of /etc/opt/csw/sudoers, sudo unusable after installation Message-ID: <363368ab2bd1fdf7decb47bb6e6d1015@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4919 ====================================================================== Reported By: maciej Assigned To: ====================================================================== Project: sudo Issue ID: 4919 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-10 19:09 CET Last Modified: 2012-03-10 19:09 CET ====================================================================== Summary: Wrong permissions of /etc/opt/csw/sudoers, sudo unusable after installation Description: pkgmap says: 1 f cswpreserveconf /etc/opt/csw/sudoers.CSW 0644 root bin 2865 45189 1329215501 When trying to use sudo: sudo: /etc/opt/csw/sudoers is mode 0644, should be 0440 sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin ====================================================================== From noreply at opencsw.org Sun Mar 11 12:07:40 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 11 Mar 2012 12:07:40 +0100 Subject: [bug-notifications] [tomcat5 0003866]: Tomcat5 should use cswusergroup for user creation In-Reply-To: Message-ID: <0156b47ab82463574420d7b1e67e3c39@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3866 ====================================================================== Reported By: wbonnet Assigned To: jh ====================================================================== Project: tomcat5 Issue ID: 3866 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-08-22 13:30 CEST Last Modified: 2012-03-11 12:07 CET ====================================================================== Summary: Tomcat5 should use cswusergroup for user creation Description: Tomcat5 should use cswusergroup for user creation ====================================================================== ---------------------------------------------------------------------- (0009715) jh (manager) - 2012-03-11 12:07 https://www.opencsw.org/mantis/view.php?id=3866#c9715 ---------------------------------------------------------------------- fixed From noreply at opencsw.org Sun Mar 11 12:08:22 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 11 Mar 2012 12:08:22 +0100 Subject: [bug-notifications] [tomcat6 0003865]: Tomcat6 should use cswusergroup for user creation In-Reply-To: <201b847f26e3a3b1863f6bfbe15e184a> Message-ID: <4ad143ace80a618d49287c62badb5b9e@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3865 ====================================================================== Reported By: wbonnet Assigned To: jh ====================================================================== Project: tomcat6 Issue ID: 3865 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-08-22 13:30 CEST Last Modified: 2012-03-11 12:08 CET ====================================================================== Summary: Tomcat6 should use cswusergroup for user creation Description: Tomcat6 should use cswusergroup for user creation ====================================================================== ---------------------------------------------------------------------- (0009671) jh (manager) - 2012-02-27 17:06 https://www.opencsw.org/mantis/view.php?id=3865#c9671 ---------------------------------------------------------------------- updated Package out From noreply at opencsw.org Mon Mar 12 08:56:37 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 08:56:37 +0100 Subject: [bug-notifications] [sudo 0004919]: Wrong permissions of /etc/opt/csw/sudoers, sudo unusable after installation In-Reply-To: <8d8dc5bce806c6b6c1e868778ccb4e56> Message-ID: <7bd07047ad9fb3cc19b7ded33cfdc390@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4919 ====================================================================== Reported By: maciej Assigned To: dam ====================================================================== Project: sudo Issue ID: 4919 Category: packaging Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-10 19:09 CET Last Modified: 2012-03-12 08:56 CET ====================================================================== Summary: Wrong permissions of /etc/opt/csw/sudoers, sudo unusable after installation Description: pkgmap says: 1 f cswpreserveconf /etc/opt/csw/sudoers.CSW 0644 root bin 2865 45189 1329215501 When trying to use sudo: sudo: /etc/opt/csw/sudoers is mode 0644, should be 0440 sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin ====================================================================== From noreply at opencsw.org Mon Mar 12 09:58:11 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 09:58:11 +0100 Subject: [bug-notifications] [nmh 0004909]: nmh 1.4 is broken In-Reply-To: <3e79c2aa91256925ec478a616823a543> Message-ID: <00aca7ba8182bff4a88932c49dae0d65@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4909 ====================================================================== Reported By: schwindt Assigned To: ====================================================================== Project: nmh Issue ID: 4909 Category: upgrade Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-02-27 15:15 CET Last Modified: 2012-03-12 09:58 CET ====================================================================== Summary: nmh 1.4 is broken Description: There is a bug in the nmh code, which is known upstream : http://lists.gnu.org/archive/html/nmh-workers/2012-02/msg00001.html A patch is available. ====================================================================== ---------------------------------------------------------------------- (0009716) opk (manager) - 2012-03-12 09:58 https://www.opencsw.org/mantis/view.php?id=4909#c9716 ---------------------------------------------------------------------- An nmh 1.5 release is imminent so I'm inclined to wait for that. From noreply at opencsw.org Mon Mar 12 11:11:37 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 11:11:37 +0100 Subject: [bug-notifications] [sudo 0004919]: Wrong permissions of /etc/opt/csw/sudoers, sudo unusable after installation In-Reply-To: <8d8dc5bce806c6b6c1e868778ccb4e56> Message-ID: <8187685c725063d81cedbfebf20199fb@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4919 ====================================================================== Reported By: maciej Assigned To: dam ====================================================================== Project: sudo Issue ID: 4919 Category: packaging Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-03-10 19:09 CET Last Modified: 2012-03-12 11:11 CET ====================================================================== Summary: Wrong permissions of /etc/opt/csw/sudoers, sudo unusable after installation Description: pkgmap says: 1 f cswpreserveconf /etc/opt/csw/sudoers.CSW 0644 root bin 2865 45189 1329215501 When trying to use sudo: sudo: /etc/opt/csw/sudoers is mode 0644, should be 0440 sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin ====================================================================== ---------------------------------------------------------------------- (0009717) dam (administrator) - 2012-03-12 11:11 https://www.opencsw.org/mantis/view.php?id=4919#c9717 ---------------------------------------------------------------------- This is fixed in 1.8.3p2,REV=2012.03.12 and released to unstable/. From noreply at opencsw.org Mon Mar 12 14:10:49 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 14:10:49 +0100 Subject: [bug-notifications] [tomcat5 0001346]: tomcat5 don\'t find Apache Portable Runtime In-Reply-To: <742c52050ae256837073bc7d4ae07cb2> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1346 ====================================================================== Reported By: ghenry Assigned To: jh ====================================================================== Project: tomcat5 Issue ID: 1346 Category: regular use Reproducibility: always Severity: feature Priority: normal Status: assigned ====================================================================== Date Submitted: 2005-12-13 01:12 CET Last Modified: 2012-03-12 14:10 CET ====================================================================== Summary: tomcat5 don\'t find Apache Portable Runtime Description: packages CSWtomcat5 and CSWapr installed in /etc/opt/csw/tomcat5, added this parameter: JAVA_OPTS=-Djava.library.path=/opt/csw/lib and when tomcat5 is launched, messages: INFO: The Apache Portable Runtime which allows optimal performance in production environments was not found on the java.library.path: /opt/csw/lib ====================================================================== From noreply at opencsw.org Mon Mar 12 14:12:35 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 14:12:35 +0100 Subject: [bug-notifications] [tomcat5 0001346]: tomcat5 don\'t find Apache Portable Runtime In-Reply-To: <742c52050ae256837073bc7d4ae07cb2> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=1346 ====================================================================== Reported By: ghenry Assigned To: jh ====================================================================== Project: tomcat5 Issue ID: 1346 Category: regular use Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2005-12-13 01:12 CET Last Modified: 2012-03-12 14:12 CET ====================================================================== Summary: tomcat5 don\'t find Apache Portable Runtime Description: packages CSWtomcat5 and CSWapr installed in /etc/opt/csw/tomcat5, added this parameter: JAVA_OPTS=-Djava.library.path=/opt/csw/lib and when tomcat5 is launched, messages: INFO: The Apache Portable Runtime which allows optimal performance in production environments was not found on the java.library.path: /opt/csw/lib ====================================================================== ---------------------------------------------------------------------- (0009718) jh (manager) - 2012-03-12 14:12 https://www.opencsw.org/mantis/view.php?id=1346#c9718 ---------------------------------------------------------------------- it not only needs apr but also a wrapper LIB which needs to be build. As we can't ship our own JDK 5 or 6. OpenJDK7 might change this. We can't deliver the wrapper lib atm. From noreply at opencsw.org Mon Mar 12 14:14:13 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 14:14:13 +0100 Subject: [bug-notifications] [tomcat5 0001346]: tomcat5 don\'t find Apache Portable Runtime In-Reply-To: <742c52050ae256837073bc7d4ae07cb2> Message-ID: <5f32be875b26534cf9213a91bf84165d@www.opencsw.org> The following issue has been UPDATED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=1346 ====================================================================== Reported By: ghenry Assigned To: jh ====================================================================== Project: tomcat5 Issue ID: 1346 Category: regular use Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: won't fix Fixed in Version: ====================================================================== Date Submitted: 2005-12-13 01:12 CET Last Modified: 2012-03-12 14:14 CET ====================================================================== Summary: tomcat5 don\'t find Apache Portable Runtime Description: packages CSWtomcat5 and CSWapr installed in /etc/opt/csw/tomcat5, added this parameter: JAVA_OPTS=-Djava.library.path=/opt/csw/lib and when tomcat5 is launched, messages: INFO: The Apache Portable Runtime which allows optimal performance in production environments was not found on the java.library.path: /opt/csw/lib ====================================================================== ---------------------------------------------------------------------- (0009718) jh (manager) - 2012-03-12 14:12 https://www.opencsw.org/mantis/view.php?id=1346#c9718 ---------------------------------------------------------------------- it not only needs apr but also a wrapper LIB which needs to be build. As we can't ship our own JDK 5 or 6. OpenJDK7 might change this. We can't deliver the wrapper lib atm. From noreply at opencsw.org Mon Mar 12 16:39:57 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 16:39:57 +0100 Subject: [bug-notifications] [py_gtk 0003834]: pygobject install issue In-Reply-To: <96d026c59269a157e941f44ef8c99e6b> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3834 ====================================================================== Reported By: choman Assigned To: ====================================================================== Project: py_gtk Issue ID: 3834 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2009-08-07 17:31 CEST Last Modified: 2012-03-12 16:39 CET ====================================================================== Summary: pygobject install issue Description: During the install of pygobject, the following file has issues during the cswpycompile phase: /opt/csw/lib/python/site-packages/pygtk.py I looked into the file and there are 2 or 3 lines with miss matching tabs and spaces. I replaced all the tabs with spaces and lined up the indentation on those line and the error messages go away. ====================================================================== ---------------------------------------------------------------------- (0009719) dam (administrator) - 2012-03-12 16:39 https://www.opencsw.org/mantis/view.php?id=3834#c9719 ---------------------------------------------------------------------- The error still persists in CSWpy-gtk-2.17.0,REV=2012.03.09: Compiling py files to normal bytecode ... /opt/csw/lib/pygtk/2.0/demos/print_editor.py: inconsistent use of tabs and spaces in indentation Compiling py files to optimized bytecode ... /opt/csw/lib/pygtk/2.0/demos/print_editor.py: inconsistent use of tabs and spaces in indentation From noreply at opencsw.org Mon Mar 12 22:45:43 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 22:45:43 +0100 Subject: [bug-notifications] [manifold 0004920]: manifold needs to depend on pysetuptools Message-ID: <6dc9c3fa421504e3e166d63e44c22c71@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4920 ====================================================================== Reported By: maciej Assigned To: ====================================================================== Project: manifold Issue ID: 4920 Category: Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-12 22:45 CET Last Modified: 2012-03-12 22:45 CET ====================================================================== Summary: manifold needs to depend on pysetuptools Description: maciej at vsol06 ~/src/mongo $ manifold -h Traceback (most recent call last): File "/opt/csw/bin/manifold", line 5, in from pkg_resources import load_entry_point ImportError: No module named pkg_resources ====================================================================== From noreply at opencsw.org Mon Mar 12 23:58:42 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 12 Mar 2012 23:58:42 +0100 Subject: [bug-notifications] [postfix 0004921]: postfix segfaults on sasldb operations (smtp auth) Message-ID: <6de02edde2109826aa50d9999129810a@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4921 ====================================================================== Reported By: soladmin Assigned To: ====================================================================== Project: postfix Issue ID: 4921 Category: packaging Reproducibility: always Severity: crash Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-12 23:58 CET Last Modified: 2012-03-12 23:58 CET ====================================================================== Summary: postfix segfaults on sasldb operations (smtp auth) Description: Currently, postfix is built against libdb-4.2 while the sasl libraries are currently built agains libdb-4.8. This is causing segfaults whenever postfix tries to do sasl operations that involve libdb (eg using sasldb for smtp auth). ====================================================================== From noreply at opencsw.org Tue Mar 13 04:56:38 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 13 Mar 2012 04:56:38 +0100 Subject: [bug-notifications] [libpcre0 0004922]: pkgadd fails; corrupted pkginfo file Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4922 ====================================================================== Reported By: philkirsch Assigned To: ====================================================================== Project: libpcre0 Issue ID: 4922 Category: other Reproducibility: always Severity: crash Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-13 04:56 CET Last Modified: 2012-03-13 04:56 CET ====================================================================== Summary: pkgadd fails; corrupted pkginfo file Description: I downloaded 88 CSW packages hoping to run nmap and was adding them in the order recommended. When I got to CSWlibpcre0, ran "pkgadd -d libpcre0-8.21,REV=2-11.12.13-Sun-S5.9-i386-CSW.pkg" the system recognized that package and asked if I wanted to add "all". Of course that was the only package I was added at the moment, so I typed "all" and pressed "Enter". At this point the entire system rebooted without notice. I tried "pkgrm CSWlibpcre0" and that ran, but repeat of the pkgadd resulted in another reboot. I have not even tried reproducing it on another system, but I've tried a total of three times on this system. Even more frustrating "pkginfo -l" stops after CSWlibjpeg7 with the message: "pkginfo: ERROR: pkginfo file is corrupt or missing" ====================================================================== From noreply at opencsw.org Tue Mar 13 08:32:22 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 13 Mar 2012 08:32:22 +0100 Subject: [bug-notifications] [libpcre0 0004922]: pkgadd fails; corrupted pkginfo file In-Reply-To: <834e7a2c26bfb047e2aa32f3a7cfc5f0> Message-ID: <94c925f1b9b8df1d8072f91719522a55@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4922 ====================================================================== Reported By: philkirsch Assigned To: ====================================================================== Project: libpcre0 Issue ID: 4922 Category: other Reproducibility: always Severity: crash Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-13 04:56 CET Last Modified: 2012-03-13 08:32 CET ====================================================================== Summary: pkgadd fails; corrupted pkginfo file Description: I downloaded 88 CSW packages hoping to run nmap and was adding them in the order recommended. When I got to CSWlibpcre0, ran "pkgadd -d libpcre0-8.21,REV=2-11.12.13-Sun-S5.9-i386-CSW.pkg" the system recognized that package and asked if I wanted to add "all". Of course that was the only package I was added at the moment, so I typed "all" and pressed "Enter". At this point the entire system rebooted without notice. I tried "pkgrm CSWlibpcre0" and that ran, but repeat of the pkgadd resulted in another reboot. I have not even tried reproducing it on another system, but I've tried a total of three times on this system. Even more frustrating "pkginfo -l" stops after CSWlibjpeg7 with the message: "pkginfo: ERROR: pkginfo file is corrupt or missing" ====================================================================== ---------------------------------------------------------------------- (0009720) maciej (developer) - 2012-03-13 08:32 https://www.opencsw.org/mantis/view.php?id=4922#c9720 ---------------------------------------------------------------------- Based on the description, these symptoms are likely to be caused by hardware failures. Can you check that? - Faulty memory - Bad sectors From noreply at opencsw.org Tue Mar 13 09:20:03 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 13 Mar 2012 09:20:03 +0100 Subject: [bug-notifications] [postfix 0004921]: postfix segfaults on sasldb operations (smtp auth) In-Reply-To: Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4921 ====================================================================== Reported By: soladmin Assigned To: maciej ====================================================================== Project: postfix Issue ID: 4921 Category: packaging Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-12 23:58 CET Last Modified: 2012-03-13 09:20 CET ====================================================================== Summary: postfix segfaults on sasldb operations (smtp auth) Description: Currently, postfix is built against libdb-4.2 while the sasl libraries are currently built agains libdb-4.8. This is causing segfaults whenever postfix tries to do sasl operations that involve libdb (eg using sasldb for smtp auth). ====================================================================== ---------------------------------------------------------------------- (0009721) maciej (developer) - 2012-03-13 09:20 https://www.opencsw.org/mantis/view.php?id=4921#c9721 ---------------------------------------------------------------------- Hi. I jumped in and rebuilt postfix against bdb48. The package has been pushed to the unstable catalog, and will be available in up to 3h. Please give it a go and give feedback if it works for you. From noreply at opencsw.org Tue Mar 13 14:57:57 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 13 Mar 2012 14:57:57 +0100 Subject: [bug-notifications] [manifold 0004920]: manifold needs to depend on pysetuptools In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4920 ====================================================================== Reported By: maciej Assigned To: dam ====================================================================== Project: manifold Issue ID: 4920 Category: Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-12 22:45 CET Last Modified: 2012-03-13 14:57 CET ====================================================================== Summary: manifold needs to depend on pysetuptools Description: maciej at vsol06 ~/src/mongo $ manifold -h Traceback (most recent call last): File "/opt/csw/bin/manifold", line 5, in from pkg_resources import load_entry_point ImportError: No module named pkg_resources ====================================================================== From noreply at opencsw.org Tue Mar 13 15:01:16 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 13 Mar 2012 15:01:16 +0100 Subject: [bug-notifications] [manifold 0004920]: manifold needs to depend on pysetuptools In-Reply-To: Message-ID: <8403d684a3d4df6cfbb9ab968319aced@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4920 ====================================================================== Reported By: maciej Assigned To: dam ====================================================================== Project: manifold Issue ID: 4920 Category: Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-03-12 22:45 CET Last Modified: 2012-03-13 15:01 CET ====================================================================== Summary: manifold needs to depend on pysetuptools Description: maciej at vsol06 ~/src/mongo $ manifold -h Traceback (most recent call last): File "/opt/csw/bin/manifold", line 5, in from pkg_resources import load_entry_point ImportError: No module named pkg_resources ====================================================================== ---------------------------------------------------------------------- (0009722) dam (administrator) - 2012-03-13 15:01 https://www.opencsw.org/mantis/view.php?id=4920#c9722 ---------------------------------------------------------------------- This is fixed in 0.2.0,REV=2012.03.13 and released to unstable/. From noreply at opencsw.org Tue Mar 13 17:00:52 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 13 Mar 2012 17:00:52 +0100 Subject: [bug-notifications] [postfix 0004921]: postfix segfaults on sasldb operations (smtp auth) In-Reply-To: Message-ID: <312e8e0b674919acb8f3131ea4a6edeb@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4921 ====================================================================== Reported By: soladmin Assigned To: maciej ====================================================================== Project: postfix Issue ID: 4921 Category: packaging Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-12 23:58 CET Last Modified: 2012-03-13 17:00 CET ====================================================================== Summary: postfix segfaults on sasldb operations (smtp auth) Description: Currently, postfix is built against libdb-4.2 while the sasl libraries are currently built agains libdb-4.8. This is causing segfaults whenever postfix tries to do sasl operations that involve libdb (eg using sasldb for smtp auth). ====================================================================== ---------------------------------------------------------------------- (0009723) soladmin (reporter) - 2012-03-13 17:00 https://www.opencsw.org/mantis/view.php?id=4921#c9723 ---------------------------------------------------------------------- Hey, I just installed the updated package from unstable, and everything seems to be working great. Thanks for the quick update. From noreply at opencsw.org Wed Mar 14 10:40:14 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 14 Mar 2012 10:40:14 +0100 Subject: [bug-notifications] [postfix 0004921]: postfix segfaults on sasldb operations (smtp auth) In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4921 ====================================================================== Reported By: soladmin Assigned To: maciej ====================================================================== Project: postfix Issue ID: 4921 Category: packaging Reproducibility: always Severity: crash Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-03-12 23:58 CET Last Modified: 2012-03-14 10:40 CET ====================================================================== Summary: postfix segfaults on sasldb operations (smtp auth) Description: Currently, postfix is built against libdb-4.2 while the sasl libraries are currently built agains libdb-4.8. This is causing segfaults whenever postfix tries to do sasl operations that involve libdb (eg using sasldb for smtp auth). ====================================================================== ---------------------------------------------------------------------- (0009724) maciej (manager) - 2012-03-14 10:40 https://www.opencsw.org/mantis/view.php?id=4921#c9724 ---------------------------------------------------------------------- Excellent, thanks. The fix has been now pushed to dublin (==testing,current). From noreply at opencsw.org Thu Mar 15 01:23:44 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 01:23:44 +0100 Subject: [bug-notifications] [php5 0004911]: session_cache_limiter() is undefined in php5.3.10 In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4911 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4911 Category: regular use Reproducibility: always Severity: block Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-02-28 01:43 CET Last Modified: 2012-03-15 01:23 CET ====================================================================== Summary: session_cache_limiter() is undefined in php5.3.10 Description: Mantis triggers the message "PHP Fatal error: Call to undefined function session_cache_limiter() in /opt/csw/share/www/mantis/htdocs/core/session_api.php on line 107" after upgrading php5 to 5.3.10,REV=2012.02.10 ====================================================================== ---------------------------------------------------------------------- (0009725) bwalton (administrator) - 2012-03-15 01:23 https://www.opencsw.org/mantis/view.php?id=4911#c9725 ---------------------------------------------------------------------- Test packages available in the bdw experimental repo: http://buildfarm.opencsw.org/experimental.html Feedback welcomed. From noreply at opencsw.org Thu Mar 15 01:29:31 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 01:29:31 +0100 Subject: [bug-notifications] [php5 0004910]: upgrade to 5.3.10, REV=2012.02.10 breaks installed libraries In-Reply-To: <9488db6b525cc76c6fc3a155ce8c41ce> Message-ID: <16fded3f0baa579dc892b2069be03c7e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4910 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4910 Category: upgrade Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-02-27 23:23 CET Last Modified: 2012-03-15 01:29 CET ====================================================================== Summary: upgrade to 5.3.10,REV=2012.02.10 breaks installed libraries Description: After upgrade to CSWphp5 5.3.10,REV=2012.02.10 and CSWphp5-mysql 5.3.10,REV=2012.02.10, Mantis no longer can reach the database (the database is up and running just fine: I use command-line mysql client and query mysql just fine). I am investigating to find the configuration file that got smacked. ====================================================================== ---------------------------------------------------------------------- (0009726) bwalton (administrator) - 2012-03-15 01:29 https://www.opencsw.org/mantis/view.php?id=4910#c9726 ---------------------------------------------------------------------- What's your current status with the upgrade? Were you able to sort things out? I have some test packages that address (hopefully) a few issues but if you've got a working upgrade they may not benefit you. From noreply at opencsw.org Thu Mar 15 01:30:30 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 01:30:30 +0100 Subject: [bug-notifications] [php5 0004910]: upgrade to 5.3.10, REV=2012.02.10 breaks installed libraries In-Reply-To: <9488db6b525cc76c6fc3a155ce8c41ce> Message-ID: <110ba5b535adb9c5a530db0ef295ea1e@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4910 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4910 Category: upgrade Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-02-27 23:23 CET Last Modified: 2012-03-15 01:30 CET ====================================================================== Summary: upgrade to 5.3.10,REV=2012.02.10 breaks installed libraries Description: After upgrade to CSWphp5 5.3.10,REV=2012.02.10 and CSWphp5-mysql 5.3.10,REV=2012.02.10, Mantis no longer can reach the database (the database is up and running just fine: I use command-line mysql client and query mysql just fine). I am investigating to find the configuration file that got smacked. ====================================================================== ---------------------------------------------------------------------- (0009727) bwalton (administrator) - 2012-03-15 01:30 https://www.opencsw.org/mantis/view.php?id=4910#c9727 ---------------------------------------------------------------------- The test packages will be available from the 'bdw' catalog here: http://buildfarm.opencsw.org/experimental.html From noreply at opencsw.org Thu Mar 15 01:32:09 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 01:32:09 +0100 Subject: [bug-notifications] [php5 0004904]: missing php5_zlib module In-Reply-To: <801b563bf69ecb65eec53d2f077f0fd1> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4904 ====================================================================== Reported By: weyhmueller Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4904 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-02-22 15:08 CET Last Modified: 2012-03-15 01:32 CET ====================================================================== Summary: missing php5_zlib module Description: I am missing the zlib module and the functions that it provides. e.g : "PHP Fatal error: Call to undefined function gzdeflate() in /var/opt/csw/nginx/simplesamlphp-1.8.2/lib/SAML2/HTTPRedirect.php on line 36" Is there a specific reason why this is not available? ====================================================================== ---------------------------------------------------------------------- (0009728) bwalton (administrator) - 2012-03-15 01:32 https://www.opencsw.org/mantis/view.php?id=4904#c9728 ---------------------------------------------------------------------- There are test packages available here: http://buildfarm.opencsw.org/experimental.html See the 'bdw' catalog which will be visible shortly. It should fix this issue as the modules are built for both cgi and ap2 compiles now. From noreply at opencsw.org Thu Mar 15 01:34:09 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 01:34:09 +0100 Subject: [bug-notifications] [php5 0004910]: upgrade to 5.3.10, REV=2012.02.10 breaks installed libraries In-Reply-To: <9488db6b525cc76c6fc3a155ce8c41ce> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4910 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4910 Category: upgrade Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-02-27 23:23 CET Last Modified: 2012-03-15 01:34 CET ====================================================================== Summary: upgrade to 5.3.10,REV=2012.02.10 breaks installed libraries Description: After upgrade to CSWphp5 5.3.10,REV=2012.02.10 and CSWphp5-mysql 5.3.10,REV=2012.02.10, Mantis no longer can reach the database (the database is up and running just fine: I use command-line mysql client and query mysql just fine). I am investigating to find the configuration file that got smacked. ====================================================================== ---------------------------------------------------------------------- (0009729) hudesd (reporter) - 2012-03-15 01:34 https://www.opencsw.org/mantis/view.php?id=4910#c9729 ---------------------------------------------------------------------- all my php issues were addressed by uninstalling everything CSW (except Perl) and re-installing mantis which picked up dependencies. The clue for this was that a fresh install of Mantis on a test machine global zone worked properly. I did have to futz with the php.conf file. My Mantis installation is online. Thanks for the followup. From noreply at opencsw.org Thu Mar 15 09:48:18 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 09:48:18 +0100 Subject: [bug-notifications] [libpcre0 0004922]: pkgadd fails; corrupted pkginfo file In-Reply-To: <834e7a2c26bfb047e2aa32f3a7cfc5f0> Message-ID: <21b649fdecbc309c09fa05e8dbbf522a@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4922 ====================================================================== Reported By: philkirsch Assigned To: dam ====================================================================== Project: libpcre0 Issue ID: 4922 Category: other Reproducibility: always Severity: crash Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-13 04:56 CET Last Modified: 2012-03-15 09:48 CET ====================================================================== Summary: pkgadd fails; corrupted pkginfo file Description: I downloaded 88 CSW packages hoping to run nmap and was adding them in the order recommended. When I got to CSWlibpcre0, ran "pkgadd -d libpcre0-8.21,REV=2-11.12.13-Sun-S5.9-i386-CSW.pkg" the system recognized that package and asked if I wanted to add "all". Of course that was the only package I was added at the moment, so I typed "all" and pressed "Enter". At this point the entire system rebooted without notice. I tried "pkgrm CSWlibpcre0" and that ran, but repeat of the pkgadd resulted in another reboot. I have not even tried reproducing it on another system, but I've tried a total of three times on this system. Even more frustrating "pkginfo -l" stops after CSWlibjpeg7 with the message: "pkginfo: ERROR: pkginfo file is corrupt or missing" ====================================================================== ---------------------------------------------------------------------- (0009720) maciej (developer) - 2012-03-13 08:32 https://www.opencsw.org/mantis/view.php?id=4922#c9720 ---------------------------------------------------------------------- Based on the description, these symptoms are likely to be caused by hardware failures. Can you check that? - Faulty memory - Bad sectors From noreply at opencsw.org Thu Mar 15 09:49:57 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 09:49:57 +0100 Subject: [bug-notifications] [libpcre0 0004922]: pkgadd fails; corrupted pkginfo file In-Reply-To: <834e7a2c26bfb047e2aa32f3a7cfc5f0> Message-ID: <89ec5c39f3af8e74940957c8f0a3adf1@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4922 ====================================================================== Reported By: philkirsch Assigned To: dam ====================================================================== Project: libpcre0 Issue ID: 4922 Category: other Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-13 04:56 CET Last Modified: 2012-03-15 09:49 CET ====================================================================== Summary: pkgadd fails; corrupted pkginfo file Description: I downloaded 88 CSW packages hoping to run nmap and was adding them in the order recommended. When I got to CSWlibpcre0, ran "pkgadd -d libpcre0-8.21,REV=2-11.12.13-Sun-S5.9-i386-CSW.pkg" the system recognized that package and asked if I wanted to add "all". Of course that was the only package I was added at the moment, so I typed "all" and pressed "Enter". At this point the entire system rebooted without notice. I tried "pkgrm CSWlibpcre0" and that ran, but repeat of the pkgadd resulted in another reboot. I have not even tried reproducing it on another system, but I've tried a total of three times on this system. Even more frustrating "pkginfo -l" stops after CSWlibjpeg7 with the message: "pkginfo: ERROR: pkginfo file is corrupt or missing" ====================================================================== ---------------------------------------------------------------------- (0009730) dam (administrator) - 2012-03-15 09:49 https://www.opencsw.org/mantis/view.php?id=4922#c9730 ---------------------------------------------------------------------- Any news on this? I concur with Maciej that it is fairly impossible to be caused by the package as libpcre0 is used by lots of other packages and is very well tested. Additionally, you are trying to install the version from experimental, right? http://buildfarm.opencsw.org/experimental.html#nmap The version 4.20 from the unstable catalog is unusable old. From noreply at opencsw.org Thu Mar 15 12:28:13 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 12:28:13 +0100 Subject: [bug-notifications] [libpcre0 0004922]: pkgadd fails; corrupted pkginfo file In-Reply-To: <834e7a2c26bfb047e2aa32f3a7cfc5f0> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4922 ====================================================================== Reported By: philkirsch Assigned To: dam ====================================================================== Project: libpcre0 Issue ID: 4922 Category: other Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-13 04:56 CET Last Modified: 2012-03-15 12:28 CET ====================================================================== Summary: pkgadd fails; corrupted pkginfo file Description: I downloaded 88 CSW packages hoping to run nmap and was adding them in the order recommended. When I got to CSWlibpcre0, ran "pkgadd -d libpcre0-8.21,REV=2-11.12.13-Sun-S5.9-i386-CSW.pkg" the system recognized that package and asked if I wanted to add "all". Of course that was the only package I was added at the moment, so I typed "all" and pressed "Enter". At this point the entire system rebooted without notice. I tried "pkgrm CSWlibpcre0" and that ran, but repeat of the pkgadd resulted in another reboot. I have not even tried reproducing it on another system, but I've tried a total of three times on this system. Even more frustrating "pkginfo -l" stops after CSWlibjpeg7 with the message: "pkginfo: ERROR: pkginfo file is corrupt or missing" ====================================================================== ---------------------------------------------------------------------- (0009731) philkirsch (reporter) - 2012-03-15 12:28 https://www.opencsw.org/mantis/view.php?id=4922#c9731 ---------------------------------------------------------------------- Well, then there is nothing that can be done. You can close the case. From noreply at opencsw.org Thu Mar 15 12:47:04 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 12:47:04 +0100 Subject: [bug-notifications] [libpcre0 0004922]: pkgadd fails; corrupted pkginfo file In-Reply-To: <834e7a2c26bfb047e2aa32f3a7cfc5f0> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4922 ====================================================================== Reported By: philkirsch Assigned To: dam ====================================================================== Project: libpcre0 Issue ID: 4922 Category: other Reproducibility: always Severity: crash Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-13 04:56 CET Last Modified: 2012-03-15 12:47 CET ====================================================================== Summary: pkgadd fails; corrupted pkginfo file Description: I downloaded 88 CSW packages hoping to run nmap and was adding them in the order recommended. When I got to CSWlibpcre0, ran "pkgadd -d libpcre0-8.21,REV=2-11.12.13-Sun-S5.9-i386-CSW.pkg" the system recognized that package and asked if I wanted to add "all". Of course that was the only package I was added at the moment, so I typed "all" and pressed "Enter". At this point the entire system rebooted without notice. I tried "pkgrm CSWlibpcre0" and that ran, but repeat of the pkgadd resulted in another reboot. I have not even tried reproducing it on another system, but I've tried a total of three times on this system. Even more frustrating "pkginfo -l" stops after CSWlibjpeg7 with the message: "pkginfo: ERROR: pkginfo file is corrupt or missing" ====================================================================== ---------------------------------------------------------------------- (0009732) dam (administrator) - 2012-03-15 12:47 https://www.opencsw.org/mantis/view.php?id=4922#c9732 ---------------------------------------------------------------------- Did you get your system back in a sane state? I suggest copying pkginfo from CSWlibjpeg7 to /var/sadm/pkg/CSWlibjpeg7/pkginfo replacing the faulty one. From noreply at opencsw.org Thu Mar 15 16:07:01 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 16:07:01 +0100 Subject: [bug-notifications] [py_gtk 0003834]: pygobject install issue In-Reply-To: <96d026c59269a157e941f44ef8c99e6b> Message-ID: <8ec2bb98134e0cef55247715363002af@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3834 ====================================================================== Reported By: choman Assigned To: ====================================================================== Project: py_gtk Issue ID: 3834 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2009-08-07 17:31 CEST Last Modified: 2012-03-15 16:07 CET ====================================================================== Summary: pygobject install issue Description: During the install of pygobject, the following file has issues during the cswpycompile phase: /opt/csw/lib/python/site-packages/pygtk.py I looked into the file and there are 2 or 3 lines with miss matching tabs and spaces. I replaced all the tabs with spaces and lined up the indentation on those line and the error messages go away. ====================================================================== ---------------------------------------------------------------------- (0009733) cgrzemba (manager) - 2012-03-15 16:07 https://www.opencsw.org/mantis/view.php?id=3834#c9733 ---------------------------------------------------------------------- These warnings were reported if python called with option -t. This is an option for reporting the mixing use of tabs and spaces in python which can confuse the python compiler. Because this is a warning and the problem exist only in a demo source I propose to do nothing and please close this bug. From noreply at opencsw.org Thu Mar 15 16:14:39 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 16:14:39 +0100 Subject: [bug-notifications] [py_gtk 0003834]: pygobject install issue In-Reply-To: <96d026c59269a157e941f44ef8c99e6b> Message-ID: <550f89abc61dc442fa1f1baea1777c4f@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3834 ====================================================================== Reported By: choman Assigned To: ====================================================================== Project: py_gtk Issue ID: 3834 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2009-08-07 17:31 CEST Last Modified: 2012-03-15 16:14 CET ====================================================================== Summary: pygobject install issue Description: During the install of pygobject, the following file has issues during the cswpycompile phase: /opt/csw/lib/python/site-packages/pygtk.py I looked into the file and there are 2 or 3 lines with miss matching tabs and spaces. I replaced all the tabs with spaces and lined up the indentation on those line and the error messages go away. ====================================================================== ---------------------------------------------------------------------- (0009734) dam (administrator) - 2012-03-15 16:14 https://www.opencsw.org/mantis/view.php?id=3834#c9734 ---------------------------------------------------------------------- Hi Carsten, would you mind reporting this upstream just for completeness? Then you can assign the bug to yourself, probably reference the upstream bugid and URL and close it. Best regards -- Dago From noreply at opencsw.org Thu Mar 15 16:15:24 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 15 Mar 2012 16:15:24 +0100 Subject: [bug-notifications] [gio_fam_backend 0004923]: ooo crash on file open if gio-fam-backend is installed Message-ID: <28af8389602fd32744626d0013888376@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4923 ====================================================================== Reported By: cgrzemba Assigned To: ====================================================================== Project: gio_fam_backend Issue ID: 4923 Category: Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-15 16:15 CET Last Modified: 2012-03-15 16:15 CET ====================================================================== Summary: ooo crash on file open if gio-fam-backend is installed Description: openoffice 3.3.0 OOO330m20(Build:9567) crashs on file open if gio_fam_backend CSWgio-fam-backend 2.28.8,REV=2011.12.11 is installed. If I remove the pakage the problem is go away. Seen the problem in Release: 5.10 Kernel architecture: i86pc Application architecture: i386 Kernel version: SunOS 5.10 Generic_147441-09 after installing all packages necessary for py_gtk ====================================================================== From noreply at opencsw.org Fri Mar 16 01:03:19 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 01:03:19 +0100 Subject: [bug-notifications] [php5_gd 0004374]: imagecreatefromjpeg(): './photo9.jpg' is not a valid JPEG In-Reply-To: <460529270d2364203eab57714f6da472> Message-ID: <1e55d96f6fbf4db0b14e8b1527ac9224@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4374 ====================================================================== Reported By: i5mast Assigned To: bwalton ====================================================================== Project: php5_gd Issue ID: 4374 Category: regular use Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-03-26 15:38 CET Last Modified: 2012-03-16 01:03 CET ====================================================================== Summary: imagecreatefromjpeg(): './photo9.jpg' is not a valid JPEG Description: I've just moved from a stable CSW branch to current. I'm receiving the following error as a result. -bash-3.00$ cat t.php -bash-3.00$ php t.php gd-jpeg: JPEG library reports unrecoverable error: Wrong JPEG library version: library is 62, caller expects 70 PHP Warning: imagecreatefromjpeg(): './photo9.jpg' is not a valid JPEG file in /export/home/webdev/t.php on line 2 Warning: imagecreatefromjpeg(): './photo9.jpg' is not a valid JPEG file in /export/home/webdev/t.php on line 2 -bash-3.00$ php -version PHP 5.2.9 (cli) (built: May 6 2009 21:48:48) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies It looks like php gd extension was compiled against a different gd library. ====================================================================== ---------------------------------------------------------------------- (0009570) i5mast (reporter) - 2012-01-30 23:51 https://www.opencsw.org/mantis/view.php?id=4374#c9570 ---------------------------------------------------------------------- Will this be on the 'testing' branch? From noreply at opencsw.org Fri Mar 16 01:10:05 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 01:10:05 +0100 Subject: [bug-notifications] [ap2_modphp5 0004483]: apache won't start in threaded MPM mode with ap2_modphp5 In-Reply-To: <0d39154fea10d30ea78701ba112948dd> Message-ID: <704c30069c320d8237afa8a686a2fbbf@www.opencsw.org> The following issue has been set as RELATED TO issue 0004912. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4483 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: ap2_modphp5 Issue ID: 4483 Category: regular use Reproducibility: always Severity: block Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-07-01 16:50 CEST Last Modified: 2012-03-16 01:10 CET ====================================================================== Summary: apache won't start in threaded MPM mode with ap2_modphp5 Description: The PHP5/ap2_modphp5 are incompatible with ap2_worker, which provides Threaded MPM mode. Please compile 64-bit PHP with threads. Thread mode can improve performance of Apache+PHP on sun4v (T2000 and T5xx0 which have hardware support for LWPs -- T2000 has 32 hardware threads of execution, T5240 128 and T5440 256). Solaris is a multi-threaded OS especially as of Solaris 10. Please support a native Solaris 10 sparcv9 (don't use -m64 and generic target, use at least an UltraIII -- its not so important that a V120 or an Ultra3500 or E10K can't run this...). ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0004912 apache2 won't start up with ap2_modphp5... ====================================================================== ---------------------------------------------------------------------- (0009681) bwalton (administrator) - 2012-02-28 02:05 https://www.opencsw.org/mantis/view.php?id=4483#c9681 ---------------------------------------------------------------------- Can you verify that this is still an issue? I don't use worker locally. Thanks -Ben From noreply at opencsw.org Fri Mar 16 01:10:07 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 01:10:07 +0100 Subject: [bug-notifications] [ap2_modphp5 0004912]: apache2 won't start up with ap2_modphp5 after update In-Reply-To: <9b78ee8fe76d1433c62e736d92fc5520> Message-ID: The following issue has been set as RELATED TO issue 0004483. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4912 ====================================================================== Reported By: jkwan Assigned To: ====================================================================== Project: ap2_modphp5 Issue ID: 4912 Category: regular use Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-02-29 04:00 CET Last Modified: 2012-02-29 04:00 CET ====================================================================== Summary: apache2 won't start up with ap2_modphp5 after update Description: when I try to start apache2 (2.2.21,REV=2012.01.13) with ap2_modphp5 (5.3.10,REV=2012.02.10), I get the error (svc log file): [Tue Feb 28 14:48:17 2012] [crit] Apache is running a threaded MPM, but your PHP Module is not compiled to be threadsafe. You need to recompile PHP. Pre-configuration failed [ Feb 28 14:48:17 Method "start" exited with status 1 ] ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0004483 apache won't start in threaded MPM mode... ====================================================================== From noreply at opencsw.org Fri Mar 16 01:10:49 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 01:10:49 +0100 Subject: [bug-notifications] [ap2_modphp5 0004483]: apache won't start in threaded MPM mode with ap2_modphp5 In-Reply-To: <0d39154fea10d30ea78701ba112948dd> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4483 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: ap2_modphp5 Issue ID: 4483 Category: regular use Reproducibility: always Severity: block Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-07-01 16:50 CEST Last Modified: 2012-03-16 01:10 CET ====================================================================== Summary: apache won't start in threaded MPM mode with ap2_modphp5 Description: The PHP5/ap2_modphp5 are incompatible with ap2_worker, which provides Threaded MPM mode. Please compile 64-bit PHP with threads. Thread mode can improve performance of Apache+PHP on sun4v (T2000 and T5xx0 which have hardware support for LWPs -- T2000 has 32 hardware threads of execution, T5240 128 and T5440 256). Solaris is a multi-threaded OS especially as of Solaris 10. Please support a native Solaris 10 sparcv9 (don't use -m64 and generic target, use at least an UltraIII -- its not so important that a V120 or an Ultra3500 or E10K can't run this...). ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0004912 apache2 won't start up with ap2_modphp5... ====================================================================== ---------------------------------------------------------------------- (0009735) bwalton (administrator) - 2012-03-16 01:10 https://www.opencsw.org/mantis/view.php?id=4483#c9735 ---------------------------------------------------------------------- Marked as related to/duplicate of 4912. I'll track this issue there. From noreply at opencsw.org Fri Mar 16 08:04:44 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:04:44 +0100 Subject: [bug-notifications] [py_gtk 0003834]: pygobject install issue In-Reply-To: <96d026c59269a157e941f44ef8c99e6b> Message-ID: <121e52f77bd130631051261cc3d92864@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3834 ====================================================================== Reported By: choman Assigned To: ====================================================================== Project: py_gtk Issue ID: 3834 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2009-08-07 17:31 CEST Last Modified: 2012-03-16 08:04 CET ====================================================================== Summary: pygobject install issue Description: During the install of pygobject, the following file has issues during the cswpycompile phase: /opt/csw/lib/python/site-packages/pygtk.py I looked into the file and there are 2 or 3 lines with miss matching tabs and spaces. I replaced all the tabs with spaces and lined up the indentation on those line and the error messages go away. ====================================================================== ---------------------------------------------------------------------- (0009736) cgrzemba (manager) - 2012-03-16 08:04 https://www.opencsw.org/mantis/view.php?id=3834#c9736 ---------------------------------------------------------------------- https://bugzilla.gnome.org Bug 672209 - mixed tabs and spaces in print_editor.py created From noreply at opencsw.org Fri Mar 16 08:21:05 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:21:05 +0100 Subject: [bug-notifications] [py_gtk 0004058]: dynamic linker error on Solaris 10 sparc In-Reply-To: <2d8caff6533ee694be2ea286e256927b> Message-ID: The following issue has been UPDATED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4058 ====================================================================== Reported By: maierkomor Assigned To: ====================================================================== Project: py_gtk Issue ID: 4058 Category: packaging Reproducibility: have not tried Severity: block Priority: normal Status: new ====================================================================== Date Submitted: 2009-11-27 22:13 CET Last Modified: 2012-03-16 08:21 CET ====================================================================== Summary: dynamic linker error on Solaris 10 sparc Description: _gtk.so requires libXext.so.0 (SUNW_1.1), which seems to be unavailable on Solaris 10 update 8. thomas at azalin:~/src/xhg% ldd /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so|grep Xext libXext.so.0 => /opt/csw/X11/lib/libXext.so.0 libXext.so.0 (SUNW_1.1) => (Version nicht gefunden) libXext.so.0 => /usr/openwin/lib/libXext.so.0 thomas at azalin:~/src/xhg% uname -a SunOS azalin 5.10 Generic_142900-01 sun4u sparc SUNW,Sun-Blade-2500 thomas at azalin:~/src/xhg% /opt/csw/bin/python Python 2.6.2 (r262:71600, May 27 2009, 13:06:14) [C] on sunos5 Type "help", "copyright", "credits" or "license" for more information. >>> import pygtk >>> import gtk Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/gtk-2.0/gtk/__init__.py", line 48, in from gtk import _gtk ImportError: ld.so.1: python: fatal: relocation error: file /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so: symbol PyUnicodeUCS2_DecodeUTF8: referenced symbol not found ====================================================================== ---------------------------------------------------------------------- (0009737) cgrzemba (manager) - 2012-03-16 08:21 https://www.opencsw.org/mantis/view.php?id=4058#c9737 ---------------------------------------------------------------------- do not exist anymore in: py_gtk CSWpy-gtk 2.17.0,REV=2012.03.15 tested in: Release: 5.10 Kernel architecture: sun4u Application architecture: sparc Kernel version: SunOS 5.10 Generic_147440-07 and: Release: 5.10 Kernel architecture: i86pc Application architecture: i386 Kernel version: SunOS 5.10 Generic_147441-09 From noreply at opencsw.org Fri Mar 16 08:22:18 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:22:18 +0100 Subject: [bug-notifications] [py_gtk 0004058]: dynamic linker error on Solaris 10 sparc In-Reply-To: <2d8caff6533ee694be2ea286e256927b> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4058 ====================================================================== Reported By: maierkomor Assigned To: ====================================================================== Project: py_gtk Issue ID: 4058 Category: packaging Reproducibility: have not tried Severity: block Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-11-27 22:13 CET Last Modified: 2012-03-16 08:22 CET ====================================================================== Summary: dynamic linker error on Solaris 10 sparc Description: _gtk.so requires libXext.so.0 (SUNW_1.1), which seems to be unavailable on Solaris 10 update 8. thomas at azalin:~/src/xhg% ldd /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so|grep Xext libXext.so.0 => /opt/csw/X11/lib/libXext.so.0 libXext.so.0 (SUNW_1.1) => (Version nicht gefunden) libXext.so.0 => /usr/openwin/lib/libXext.so.0 thomas at azalin:~/src/xhg% uname -a SunOS azalin 5.10 Generic_142900-01 sun4u sparc SUNW,Sun-Blade-2500 thomas at azalin:~/src/xhg% /opt/csw/bin/python Python 2.6.2 (r262:71600, May 27 2009, 13:06:14) [C] on sunos5 Type "help", "copyright", "credits" or "license" for more information. >>> import pygtk >>> import gtk Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/gtk-2.0/gtk/__init__.py", line 48, in from gtk import _gtk ImportError: ld.so.1: python: fatal: relocation error: file /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so: symbol PyUnicodeUCS2_DecodeUTF8: referenced symbol not found ====================================================================== ---------------------------------------------------------------------- (0009737) cgrzemba (manager) - 2012-03-16 08:21 https://www.opencsw.org/mantis/view.php?id=4058#c9737 ---------------------------------------------------------------------- do not exist anymore in: py_gtk CSWpy-gtk 2.17.0,REV=2012.03.15 tested in: Release: 5.10 Kernel architecture: sun4u Application architecture: sparc Kernel version: SunOS 5.10 Generic_147440-07 and: Release: 5.10 Kernel architecture: i86pc Application architecture: i386 Kernel version: SunOS 5.10 Generic_147441-09 From noreply at opencsw.org Fri Mar 16 08:23:57 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:23:57 +0100 Subject: [bug-notifications] [py_gtk 0004057]: pygtk package lacks dependency on pygobject In-Reply-To: <5d338fbeae7c046b2ae52000f7fe5e22> Message-ID: <859629f69d5509192663d63ccd660102@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4057 ====================================================================== Reported By: maierkomor Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 4057 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-11-27 21:57 CET Last Modified: 2012-03-16 08:23 CET ====================================================================== Summary: pygtk package lacks dependency on pygobject Description: As the summary says. Using pkg-get -i pygtk installs pygtk with pygobject, which is necessary ====================================================================== From noreply at opencsw.org Fri Mar 16 08:24:39 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:24:39 +0100 Subject: [bug-notifications] [py_gtk 0004057]: pygtk package lacks dependency on pygobject In-Reply-To: <5d338fbeae7c046b2ae52000f7fe5e22> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4057 ====================================================================== Reported By: maierkomor Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 4057 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-11-27 21:57 CET Last Modified: 2012-03-16 08:24 CET ====================================================================== Summary: pygtk package lacks dependency on pygobject Description: As the summary says. Using pkg-get -i pygtk installs pygtk with pygobject, which is necessary ====================================================================== ---------------------------------------------------------------------- (0009738) cgrzemba (manager) - 2012-03-16 08:24 https://www.opencsw.org/mantis/view.php?id=4057#c9738 ---------------------------------------------------------------------- fixed in py_gtk CSWpy-gtk 2.17.0,REV=2012.03.15 From noreply at opencsw.org Fri Mar 16 08:25:16 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:25:16 +0100 Subject: [bug-notifications] [py_gtk 0004057]: pygtk package lacks dependency on pygobject In-Reply-To: <5d338fbeae7c046b2ae52000f7fe5e22> Message-ID: <264605e1753a94f6dc9526f306552e40@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4057 ====================================================================== Reported By: maierkomor Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 4057 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-11-27 21:57 CET Last Modified: 2012-03-16 08:25 CET ====================================================================== Summary: pygtk package lacks dependency on pygobject Description: As the summary says. Using pkg-get -i pygtk installs pygtk with pygobject, which is necessary ====================================================================== ---------------------------------------------------------------------- (0009738) cgrzemba (manager) - 2012-03-16 08:24 https://www.opencsw.org/mantis/view.php?id=4057#c9738 ---------------------------------------------------------------------- fixed in py_gtk CSWpy-gtk 2.17.0,REV=2012.03.15 From noreply at opencsw.org Fri Mar 16 08:26:21 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:26:21 +0100 Subject: [bug-notifications] [py_gtk 0003834]: pygobject install issue In-Reply-To: <96d026c59269a157e941f44ef8c99e6b> Message-ID: <55401a457b74ba22c8b38df98cd7eee5@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3834 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3834 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: won't fix Fixed in Version: ====================================================================== Date Submitted: 2009-08-07 17:31 CEST Last Modified: 2012-03-16 08:26 CET ====================================================================== Summary: pygobject install issue Description: During the install of pygobject, the following file has issues during the cswpycompile phase: /opt/csw/lib/python/site-packages/pygtk.py I looked into the file and there are 2 or 3 lines with miss matching tabs and spaces. I replaced all the tabs with spaces and lined up the indentation on those line and the error messages go away. ====================================================================== ---------------------------------------------------------------------- (0009739) cgrzemba (manager) - 2012-03-16 08:26 https://www.opencsw.org/mantis/view.php?id=3834#c9739 ---------------------------------------------------------------------- gnome bug opened From noreply at opencsw.org Fri Mar 16 08:26:58 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:26:58 +0100 Subject: [bug-notifications] [py_gtk 0003833]: PyGTK requires pygobject In-Reply-To: Message-ID: <0455f39759c2a237a23ba8ec0badb0c0@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3833 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3833 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-08-07 17:26 CEST Last Modified: 2012-03-16 08:26 CET ====================================================================== Summary: PyGTK requires pygobject Description: pygtk produces a "ImportError: No module pygtk" unless the pygobject package is installed. pygobject should be made as a package requirement for pygtk ====================================================================== ---------------------------------------------------------------------- (0006526) choman (reporter) - 2009-08-07 17:32 https://www.opencsw.org/mantis/view.php?id=3833#c6526 ---------------------------------------------------------------------- This issue appears on both sparc and x86 From noreply at opencsw.org Fri Mar 16 08:28:52 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:28:52 +0100 Subject: [bug-notifications] [py_gtk 0003833]: PyGTK requires pygobject In-Reply-To: Message-ID: <08bfa67fd4f15ba46ffdb5ec932e0449@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3833 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3833 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-08-07 17:26 CEST Last Modified: 2012-03-16 08:28 CET ====================================================================== Summary: PyGTK requires pygobject Description: pygtk produces a "ImportError: No module pygtk" unless the pygobject package is installed. pygobject should be made as a package requirement for pygtk ====================================================================== ---------------------------------------------------------------------- (0009740) cgrzemba (manager) - 2012-03-16 08:28 https://www.opencsw.org/mantis/view.php?id=3833#c9740 ---------------------------------------------------------------------- same as Issue 4058 From noreply at opencsw.org Fri Mar 16 08:29:56 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:29:56 +0100 Subject: [bug-notifications] [py_gtk 0003832]: PyGTK is unable to import gtk In-Reply-To: <3da68e26b0629848bd9f1efd909309b0> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3832 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3832 Category: other Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-08-07 17:23 CEST Last Modified: 2012-03-16 08:29 CET ====================================================================== Summary: PyGTK is unable to import gtk Description: On both sparc and i386 packages, after installing pygtk "correctly". The following error is produced: ImportError: ld.so.1: python: fatal: relocation error: file /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so: symbol PyUnicodeUCS2_DecodeUTF8: referenced symbol not found see below. Also being filed under a separate bug, pygtk requires pygobjct. which also has a bug ====================================================================== From noreply at opencsw.org Fri Mar 16 08:31:40 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:31:40 +0100 Subject: [bug-notifications] [py_gtk 0003832]: PyGTK is unable to import gtk In-Reply-To: <3da68e26b0629848bd9f1efd909309b0> Message-ID: <66d3979284a33eb2c2d9131915ce2b83@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3832 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3832 Category: other Reproducibility: always Severity: major Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-08-07 17:23 CEST Last Modified: 2012-03-16 08:31 CET ====================================================================== Summary: PyGTK is unable to import gtk Description: On both sparc and i386 packages, after installing pygtk "correctly". The following error is produced: ImportError: ld.so.1: python: fatal: relocation error: file /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so: symbol PyUnicodeUCS2_DecodeUTF8: referenced symbol not found see below. Also being filed under a separate bug, pygtk requires pygobjct. which also has a bug ====================================================================== ---------------------------------------------------------------------- (0009741) cgrzemba (manager) - 2012-03-16 08:31 https://www.opencsw.org/mantis/view.php?id=3832#c9741 ---------------------------------------------------------------------- not reproducible/seen in py_gtk CSWpy-gtk 2.17.0,REV=2012.03.15 From noreply at opencsw.org Fri Mar 16 08:32:16 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:32:16 +0100 Subject: [bug-notifications] [py_gtk 0003187]: Depend on CSWggettextrt In-Reply-To: <7628550cabc5ba95f059f99b76fda735> Message-ID: <7268d3592d756ef79111464e73f68647@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3187 ====================================================================== Reported By: harpchad Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3187 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-02-14 03:00 CET Last Modified: 2012-03-16 08:32 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== From noreply at opencsw.org Fri Mar 16 08:38:17 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 08:38:17 +0100 Subject: [bug-notifications] [py_gtk 0003187]: Depend on CSWggettextrt In-Reply-To: <7628550cabc5ba95f059f99b76fda735> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3187 ====================================================================== Reported By: harpchad Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3187 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:00 CET Last Modified: 2012-03-16 08:38 CET ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0009742) cgrzemba (manager) - 2012-03-16 08:38 https://www.opencsw.org/mantis/view.php?id=3187#c9742 ---------------------------------------------------------------------- there is an implied dependency, see http://buildfarm.opencsw.org/cgi-bin/depgraph?pkg=py_gtk From noreply at opencsw.org Fri Mar 16 09:39:40 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 09:39:40 +0100 Subject: [bug-notifications] [py_gtk 0003833]: PyGTK requires pygobject In-Reply-To: Message-ID: <6d066eab5eea0c0fc291bb3803624ee6@www.opencsw.org> The following issue has been set as DUPLICATE OF issue 0004058. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3833 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gtk Issue ID: 3833 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-08-07 17:26 CEST Last Modified: 2012-03-16 09:39 CET ====================================================================== Summary: PyGTK requires pygobject Description: pygtk produces a "ImportError: No module pygtk" unless the pygobject package is installed. pygobject should be made as a package requirement for pygtk ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- duplicate of 0004058 dynamic linker error on Solaris 10 sparc ====================================================================== ---------------------------------------------------------------------- (0009740) cgrzemba (manager) - 2012-03-16 08:28 https://www.opencsw.org/mantis/view.php?id=3833#c9740 ---------------------------------------------------------------------- same as Issue 4058 From noreply at opencsw.org Fri Mar 16 09:39:41 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 16 Mar 2012 09:39:41 +0100 Subject: [bug-notifications] [py_gtk 0004058]: dynamic linker error on Solaris 10 sparc In-Reply-To: <2d8caff6533ee694be2ea286e256927b> Message-ID: The issue 0003833 has been set as DUPLICATE OF the following issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4058 ====================================================================== Reported By: maierkomor Assigned To: ====================================================================== Project: py_gtk Issue ID: 4058 Category: packaging Reproducibility: have not tried Severity: block Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-11-27 22:13 CET Last Modified: 2012-03-16 08:22 CET ====================================================================== Summary: dynamic linker error on Solaris 10 sparc Description: _gtk.so requires libXext.so.0 (SUNW_1.1), which seems to be unavailable on Solaris 10 update 8. thomas at azalin:~/src/xhg% ldd /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so|grep Xext libXext.so.0 => /opt/csw/X11/lib/libXext.so.0 libXext.so.0 (SUNW_1.1) => (Version nicht gefunden) libXext.so.0 => /usr/openwin/lib/libXext.so.0 thomas at azalin:~/src/xhg% uname -a SunOS azalin 5.10 Generic_142900-01 sun4u sparc SUNW,Sun-Blade-2500 thomas at azalin:~/src/xhg% /opt/csw/bin/python Python 2.6.2 (r262:71600, May 27 2009, 13:06:14) [C] on sunos5 Type "help", "copyright", "credits" or "license" for more information. >>> import pygtk >>> import gtk Traceback (most recent call last): File "", line 1, in File "/opt/csw/lib/python/site-packages/gtk-2.0/gtk/__init__.py", line 48, in from gtk import _gtk ImportError: ld.so.1: python: fatal: relocation error: file /opt/csw/lib/python/site-packages/gtk-2.0/gtk/_gtk.so: symbol PyUnicodeUCS2_DecodeUTF8: referenced symbol not found ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- has duplicate 0003833 PyGTK requires pygobject ====================================================================== ---------------------------------------------------------------------- (0009737) cgrzemba (manager) - 2012-03-16 08:21 https://www.opencsw.org/mantis/view.php?id=4058#c9737 ---------------------------------------------------------------------- do not exist anymore in: py_gtk CSWpy-gtk 2.17.0,REV=2012.03.15 tested in: Release: 5.10 Kernel architecture: sun4u Application architecture: sparc Kernel version: SunOS 5.10 Generic_147440-07 and: Release: 5.10 Kernel architecture: i86pc Application architecture: i386 Kernel version: SunOS 5.10 Generic_147441-09 From noreply at opencsw.org Sun Mar 18 07:49:16 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 18 Mar 2012 07:49:16 +0100 Subject: [bug-notifications] [libgmp 0004021]: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall In-Reply-To: Message-ID: <2e0ae430c62c209278a76ef322ded02f@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4021 ====================================================================== Reported By: dam Assigned To: maciej ====================================================================== Project: libgmp Issue ID: 4021 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-11-11 16:17 CET Last Modified: 2012-03-18 07:49 CET ====================================================================== Summary: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall Description: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall ====================================================================== From noreply at opencsw.org Sun Mar 18 07:50:38 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 18 Mar 2012 07:50:38 +0100 Subject: [bug-notifications] [libgmp 0004021]: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall In-Reply-To: Message-ID: <0ff4877bb09d4bdfcb5c6bd787a3d63b@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4021 ====================================================================== Reported By: dam Assigned To: maciej ====================================================================== Project: libgmp Issue ID: 4021 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-11-11 16:17 CET Last Modified: 2012-03-18 07:50 CET ====================================================================== Summary: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall Description: Please use the cswtexinfo class for *.info and remove mkdirentries from postinstall ====================================================================== ---------------------------------------------------------------------- (0009743) maciej (manager) - 2012-03-18 07:50 https://www.opencsw.org/mantis/view.php?id=4021#c9743 ---------------------------------------------------------------------- Fixed in the 5.0.2 package release. From noreply at opencsw.org Sun Mar 18 08:34:12 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 18 Mar 2012 08:34:12 +0100 Subject: [bug-notifications] [vncserver 0004658]: VNC Server does not start after installation In-Reply-To: <6769e7584d41c05596b3e5a410d69a88> Message-ID: <499c0aa767c34a2851a93ccec14151dd@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4658 ====================================================================== Reported By: wbonnet Assigned To: ====================================================================== Project: vncserver Issue ID: 4658 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2011-01-05 15:27 CET Last Modified: 2012-03-18 08:34 CET ====================================================================== Summary: VNC Server does not start after installation Description: After installation of VNC server package, the service does not start. First problem : script is not executable bash-3.00# ls -la /etc/opt/csw/init.d/cswvncserver -rw-r--r-- 1 root bin 1421 mars 3 2010 /etc/opt/csw/init.d/cswvncserver Suggested fix : bash-3.00# chmod a+x /etc/opt/csw/init.d/cswvncserver bash-3.00# ls -la /etc/opt/csw/init.d/cswvncserver -rwxr-xr-x 1 root bin 1421 mars 3 2010 /etc/opt/csw/init.d/cswvncserver Second problem : Some executables are not in the PATH xauth is not available, nor is Xnv bash-3.00# cat network-cswvncserver\:default.log [ janv 5 14:02:19 Enabled. ] [ janv 5 14:02:19 Executing start method ("/var/opt/csw/svc/method/svc-cswvncserver start") ] Starting VNC server: 1:william vncserver: couldn't find "xauth" on your PATH. [ janv 5 14:02:19 Method "start" exited with status 1 ] [ janv 5 14:02:19 Executing start method ("/var/opt/csw/svc/method/svc-cswvncserver start") ] Starting VNC server: 1:william vncserver: couldn't find "xauth" on your PATH. [ janv 5 14:02:19 Method "start" exited with status 1 ] [ janv 5 14:02:19 Executing start method ("/var/opt/csw/svc/method/svc-cswvncserver start") ] Starting VNC server: 1:william vncserver: couldn't find "xauth" on your PATH. [ janv 5 14:02:20 Method "start" exited with status 1 ] After installation the startup script can be started with a target user without a modified PATH variable. I suggest to add /usr/openwin/bin and /opt/csw/bin to the PATH inside the startup script. This will ensure that no programs are missing in the PATH. ====================================================================== ---------------------------------------------------------------------- (0009744) maciej (manager) - 2012-03-18 08:34 https://www.opencsw.org/mantis/view.php?id=4658#c9744 ---------------------------------------------------------------------- Sadly, tightvnc 1.3.10 does not build on Solaris 9: [configure-modulated] complete for tightvnc. (cd work/solaris9-sparc/build-isa-sparcv8/vnc_unixsrc && HOME="/home/maciej" PATH="/home/maciej/src/opencsw/pkg/.buildsys/v2/gar/bin/sos12-wrappers:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/bin:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/bin:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/sbin:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/sbin:/opt/csw/bin:/opt/csw/bin:/opt/csw/sbin:/opt/csw/sbin:/opt/SUNWspro/bin:/home/maciej/src/opencsw/pkg/.buildsys/v2/gar/bin:/usr/bin:/usr/sbin:/usr/java/bin:/usr/ccs/bin:/usr/openwin/bin" LC_ALL="C" prefix="/opt/csw" exec_prefix="/opt/csw" bindir="/opt/csw/bin" sbindir="/opt/csw/sbin" libexecdir="/opt/csw/libexec" datadir="/opt/csw/share" sysconfdir="/etc/opt/csw" sharedstatedir="/opt/csw/share" localstatedir="/var/opt/csw" libdir="/opt/csw/lib" infodir="/opt/csw/share/info" lispdir="/opt/csw/share/emacs/site-lisp" includedir="/opt/csw/include" mandir="/opt/csw/share/man" docdir="/opt/csw/share/doc" sourcedir="/opt/csw/src" CPPFLAGS="-I/usr/openwin/share/include/X11 -I/opt/csw/include" CFLAGS="-xO3 -m32 -xarch=v8" CXXFLAGS="-xO3 -m32 -xarch=v8" LDFLAGS="-m32 -xarch=v8 /opt/csw/lib -L/opt/csw/lib" FFLAGS="-xO3 -m32 -xarch=v8" FCFLAGS="-xO3 -m32 -xarch=v8" ASFLAGS="" OPTFLAGS="-xO3 -m32 -xarch=v8" CC="/opt/SUNWspro/bin/cc" CXX="/opt/SUNWspro/bin/CC" CC_HOME="/opt/SUNWspro" CC_VERSION="Sun C 5.9 SunOS_sparc Patch 124867-16 2010/08/11" CXX_VERSION="Sun C++ 5.9 SunOS_sparc Patch 124863-28 2011/12/14" GARCH="sparc" GAROSREL="5.9" GARPACKAGE="trunk" LD_OPTIONS="-R/opt/csw/lib/\$ISALIST -R/opt/csw/lib" \ EXTRA_INCLUDES="-I/opt/csw/include" \ EXTRA_DEFINES="-xO3 -m32 -xarch=v8" \ LOCAL_LDFLAGS="-L/opt/csw/lib" \ gmake World) gmake[2]: Entering directory `/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/build-isa-sparcv8/vnc_unixsrc' make Makefiles making Makefiles in libvncauth... Usage : make [ -f makefile ][ -K statefile ]... [ -d ][ -dd ][ -D ][ -DD ] [ -e ][ -i ][ -k ][ -n ][ -p ][ -P ][ -q ][ -r ][ -s ][ -S ][ -t ] [ -u ][ -w ][ -V ][ target... ][ macro=value... ][ "macro +=value"... ] make: Fatal error: Unknown option `-I' From noreply at opencsw.org Sun Mar 18 08:35:10 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 18 Mar 2012 08:35:10 +0100 Subject: [bug-notifications] [cas_migrateconf 0004901]: pkgrm: ERROR: unable to remove In-Reply-To: Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4901 ====================================================================== Reported By: ghenry Assigned To: maciej ====================================================================== Project: cas_migrateconf Issue ID: 4901 Category: upgrade Reproducibility: always Severity: block Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-02-21 08:02 CET Last Modified: 2012-03-18 08:35 CET ====================================================================== Summary: pkgrm: ERROR: unable to remove Description: turquoise2-root% pkgrm CSWcas-migrateconf The following package is currently installed: CSWcas-migrateconf cas_migrateconf - Class action script migrateconf (all) 1.47,REV=2012.02.14 Do you want to remove this package? [y,n,?,q] y ## Removing installed package instance ## Verifying package dependencies in global zone WARNING: The package depends on the package currently being removed. WARNING: The package depends on the package currently being removed. Dependency checking failed. Do you want to continue with the removal of this package [y,n,?,q] y ## Processing package information. ## Removing pathnames in class pkgrm: ERROR: unable to remove pkgrm: ERROR: unable to remove /opt/csw/share/doc/cas_migrateconf/license /opt/csw/share/doc/cas_migrateconf ## Updating system information. Removal of partially failed. ====================================================================== ---------------------------------------------------------------------- (0009623) dam (administrator) - 2012-02-21 09:25 https://www.opencsw.org/mantis/view.php?id=4901#c9623 ---------------------------------------------------------------------- The CSWcas-* packages contain class action scripts which must be located in /usr to work the way we intend. See for details http://www.opencsw.org/community/questions/50/do-any-opencsw-packages-install-anything-under-usr These packages must explicitly not be removed from inside a sparse zone as /usr is not writable there, but from the global zone. From noreply at opencsw.org Sun Mar 18 08:36:04 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 18 Mar 2012 08:36:04 +0100 Subject: [bug-notifications] [cas_migrateconf 0004901]: pkgrm: ERROR: unable to remove In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4901 ====================================================================== Reported By: ghenry Assigned To: maciej ====================================================================== Project: cas_migrateconf Issue ID: 4901 Category: upgrade Reproducibility: always Severity: block Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-02-21 08:02 CET Last Modified: 2012-03-18 08:36 CET ====================================================================== Summary: pkgrm: ERROR: unable to remove Description: turquoise2-root% pkgrm CSWcas-migrateconf The following package is currently installed: CSWcas-migrateconf cas_migrateconf - Class action script migrateconf (all) 1.47,REV=2012.02.14 Do you want to remove this package? [y,n,?,q] y ## Removing installed package instance ## Verifying package dependencies in global zone WARNING: The package depends on the package currently being removed. WARNING: The package depends on the package currently being removed. Dependency checking failed. Do you want to continue with the removal of this package [y,n,?,q] y ## Processing package information. ## Removing pathnames in class pkgrm: ERROR: unable to remove pkgrm: ERROR: unable to remove /opt/csw/share/doc/cas_migrateconf/license /opt/csw/share/doc/cas_migrateconf ## Updating system information. Removal of partially failed. ====================================================================== ---------------------------------------------------------------------- (0009745) maciej (manager) - 2012-03-18 08:36 https://www.opencsw.org/mantis/view.php?id=4901#c9745 ---------------------------------------------------------------------- Yes, the class action scripts packages must be installed in the global zone, or a full root zone. From noreply at opencsw.org Sun Mar 18 08:38:50 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 18 Mar 2012 08:38:50 +0100 Subject: [bug-notifications] [vncserver 0004658]: VNC Server does not start after installation In-Reply-To: <6769e7584d41c05596b3e5a410d69a88> Message-ID: <5bd99a10eff87cf68ed34175a2425f56@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4658 ====================================================================== Reported By: wbonnet Assigned To: maciej ====================================================================== Project: vncserver Issue ID: 4658 Category: packaging Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-01-05 15:27 CET Last Modified: 2012-03-18 08:38 CET ====================================================================== Summary: VNC Server does not start after installation Description: After installation of VNC server package, the service does not start. First problem : script is not executable bash-3.00# ls -la /etc/opt/csw/init.d/cswvncserver -rw-r--r-- 1 root bin 1421 mars 3 2010 /etc/opt/csw/init.d/cswvncserver Suggested fix : bash-3.00# chmod a+x /etc/opt/csw/init.d/cswvncserver bash-3.00# ls -la /etc/opt/csw/init.d/cswvncserver -rwxr-xr-x 1 root bin 1421 mars 3 2010 /etc/opt/csw/init.d/cswvncserver Second problem : Some executables are not in the PATH xauth is not available, nor is Xnv bash-3.00# cat network-cswvncserver\:default.log [ janv 5 14:02:19 Enabled. ] [ janv 5 14:02:19 Executing start method ("/var/opt/csw/svc/method/svc-cswvncserver start") ] Starting VNC server: 1:william vncserver: couldn't find "xauth" on your PATH. [ janv 5 14:02:19 Method "start" exited with status 1 ] [ janv 5 14:02:19 Executing start method ("/var/opt/csw/svc/method/svc-cswvncserver start") ] Starting VNC server: 1:william vncserver: couldn't find "xauth" on your PATH. [ janv 5 14:02:19 Method "start" exited with status 1 ] [ janv 5 14:02:19 Executing start method ("/var/opt/csw/svc/method/svc-cswvncserver start") ] Starting VNC server: 1:william vncserver: couldn't find "xauth" on your PATH. [ janv 5 14:02:20 Method "start" exited with status 1 ] After installation the startup script can be started with a target user without a modified PATH variable. I suggest to add /usr/openwin/bin and /opt/csw/bin to the PATH inside the startup script. This will ensure that no programs are missing in the PATH. ====================================================================== ---------------------------------------------------------------------- (0009744) maciej (manager) - 2012-03-18 08:34 https://www.opencsw.org/mantis/view.php?id=4658#c9744 ---------------------------------------------------------------------- Sadly, tightvnc 1.3.10 does not build on Solaris 9: [configure-modulated] complete for tightvnc. (cd work/solaris9-sparc/build-isa-sparcv8/vnc_unixsrc && HOME="/home/maciej" PATH="/home/maciej/src/opencsw/pkg/.buildsys/v2/gar/bin/sos12-wrappers:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/bin:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/bin:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/sbin:/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/install-isa-sparcv8/opt/csw/sbin:/opt/csw/bin:/opt/csw/bin:/opt/csw/sbin:/opt/csw/sbin:/opt/SUNWspro/bin:/home/maciej/src/opencsw/pkg/.buildsys/v2/gar/bin:/usr/bin:/usr/sbin:/usr/java/bin:/usr/ccs/bin:/usr/openwin/bin" LC_ALL="C" prefix="/opt/csw" exec_prefix="/opt/csw" bindir="/opt/csw/bin" sbindir="/opt/csw/sbin" libexecdir="/opt/csw/libexec" datadir="/opt/csw/share" sysconfdir="/etc/opt/csw" sharedstatedir="/opt/csw/share" localstatedir="/var/opt/csw" libdir="/opt/csw/lib" infodir="/opt/csw/share/info" lispdir="/opt/csw/share/emacs/site-lisp" includedir="/opt/csw/include" mandir="/opt/csw/share/man" docdir="/opt/csw/share/doc" sourcedir="/opt/csw/src" CPPFLAGS="-I/usr/openwin/share/include/X11 -I/opt/csw/include" CFLAGS="-xO3 -m32 -xarch=v8" CXXFLAGS="-xO3 -m32 -xarch=v8" LDFLAGS="-m32 -xarch=v8 /opt/csw/lib -L/opt/csw/lib" FFLAGS="-xO3 -m32 -xarch=v8" FCFLAGS="-xO3 -m32 -xarch=v8" ASFLAGS="" OPTFLAGS="-xO3 -m32 -xarch=v8" CC="/opt/SUNWspro/bin/cc" CXX="/opt/SUNWspro/bin/CC" CC_HOME="/opt/SUNWspro" CC_VERSION="Sun C 5.9 SunOS_sparc Patch 124867-16 2010/08/11" CXX_VERSION="Sun C++ 5.9 SunOS_sparc Patch 124863-28 2011/12/14" GARCH="sparc" GAROSREL="5.9" GARPACKAGE="trunk" LD_OPTIONS="-R/opt/csw/lib/\$ISALIST -R/opt/csw/lib" \ EXTRA_INCLUDES="-I/opt/csw/include" \ EXTRA_DEFINES="-xO3 -m32 -xarch=v8" \ LOCAL_LDFLAGS="-L/opt/csw/lib" \ gmake World) gmake[2]: Entering directory `/home/maciej/src/opencsw/pkg/tightvnc/trunk/work/solaris9-sparc/build-isa-sparcv8/vnc_unixsrc' make Makefiles making Makefiles in libvncauth... Usage : make [ -f makefile ][ -K statefile ]... [ -d ][ -dd ][ -D ][ -DD ] [ -e ][ -i ][ -k ][ -n ][ -p ][ -P ][ -q ][ -r ][ -s ][ -S ][ -t ] [ -u ][ -w ][ -V ][ target... ][ macro=value... ][ "macro +=value"... ] make: Fatal error: Unknown option `-I' From noreply at opencsw.org Mon Mar 19 09:12:40 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 19 Mar 2012 09:12:40 +0100 Subject: [bug-notifications] [py_gobject_dev 0003850]: pygobject install issues with cswpycompile In-Reply-To: <20ae36813c42bd7665df49e0241c143f> Message-ID: The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3850 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gobject_dev Issue ID: 3850 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-08-12 20:57 CEST Last Modified: 2012-03-19 09:12 CET ====================================================================== Summary: pygobject install issues with cswpycompile Description: During the install of pygobject, the following file has issues during the cswpycompile phase: /opt/csw/lib/python/site-packages/pygtk.py ====================================================================== ---------------------------------------------------------------------- (0006567) mwatters (reporter) - 2009-08-12 21:23 https://www.opencsw.org/mantis/view.php?id=3850#c6567 ---------------------------------------------------------------------- I am pretty sure this bug resided with pygtk, but as I am working on re-packaging pygtk against the latest version of python and gtk I will leave it here. From noreply at opencsw.org Mon Mar 19 09:14:39 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 19 Mar 2012 09:14:39 +0100 Subject: [bug-notifications] [py_gobject_dev 0003850]: pygobject install issues with cswpycompile In-Reply-To: <20ae36813c42bd7665df49e0241c143f> Message-ID: <68cd33b8f1496ef49bc33c95cc235b4c@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3850 ====================================================================== Reported By: choman Assigned To: cgrzemba ====================================================================== Project: py_gobject_dev Issue ID: 3850 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-08-12 20:57 CEST Last Modified: 2012-03-19 09:14 CET ====================================================================== Summary: pygobject install issues with cswpycompile Description: During the install of pygobject, the following file has issues during the cswpycompile phase: /opt/csw/lib/python/site-packages/pygtk.py ====================================================================== ---------------------------------------------------------------------- (0009746) cgrzemba (manager) - 2012-03-19 09:14 https://www.opencsw.org/mantis/view.php?id=3850#c9746 ---------------------------------------------------------------------- Fixed in: py_gtk CSWpy-gtk 2.17.0,REV=2012.03.15 From noreply at opencsw.org Mon Mar 19 09:17:41 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 19 Mar 2012 09:17:41 +0100 Subject: [bug-notifications] [cups_dev 0004534]: missing/broken file in docs In-Reply-To: <5c51e2a72b4b52e2e47e7409b76e8704> Message-ID: <809576e40e5bcf8c6d58f0096b6c3f5c@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4534 ====================================================================== Reported By: phil Assigned To: cgrzemba ====================================================================== Project: cups_dev Issue ID: 4534 Category: packaging Reproducibility: always Severity: crash Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-08-27 19:39 CEST Last Modified: 2012-03-19 09:17 CET ====================================================================== Summary: missing/broken file in docs Description: installed cupsdoc. Pointed my browser at file:///opt/csw/share/doc/cups/index.html Clicked on the "Adding Printers and Classes" link. Got a missing file error. "Firefox can't find the file at /opt/csw/share/doc/cups/admin" The other links in that column, seem to be valid though ====================================================================== From noreply at opencsw.org Mon Mar 19 09:21:08 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 19 Mar 2012 09:21:08 +0100 Subject: [bug-notifications] [cups_dev 0004534]: missing/broken file in docs In-Reply-To: <5c51e2a72b4b52e2e47e7409b76e8704> Message-ID: <6b35ee83e41c227e413f09666fdbc9a7@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4534 ====================================================================== Reported By: phil Assigned To: cgrzemba ====================================================================== Project: cups_dev Issue ID: 4534 Category: packaging Reproducibility: always Severity: crash Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-08-27 19:39 CEST Last Modified: 2012-03-19 09:21 CET ====================================================================== Summary: missing/broken file in docs Description: installed cupsdoc. Pointed my browser at file:///opt/csw/share/doc/cups/index.html Clicked on the "Adding Printers and Classes" link. Got a missing file error. "Firefox can't find the file at /opt/csw/share/doc/cups/admin" The other links in that column, seem to be valid though ====================================================================== ---------------------------------------------------------------------- (0009747) cgrzemba (manager) - 2012-03-19 09:21 https://www.opencsw.org/mantis/view.php?id=4534#c9747 ---------------------------------------------------------------------- content is moved from package cups_dev to cupsd in version: cupsd CSWcupsd 1.5.2,REV=2012.03.16 From noreply at opencsw.org Wed Mar 21 01:14:31 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 01:14:31 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J Message-ID: <4a5fce840757b225bb1fb2632cfd20d2@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 01:14 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== From noreply at opencsw.org Wed Mar 21 13:37:25 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 13:37:25 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: <342cf3e61d1175d7068a669cd14861da@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 13:37 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009748) bwalton (administrator) - 2012-03-21 13:37 https://www.opencsw.org/mantis/view.php?id=4924#c9748 ---------------------------------------------------------------------- During the installation of ruby, an rbconfig.rb.sun file is delivered and the CSWalternatives package is supposed to add a symlink from rbconfig.rb -> rbconfig.rb.sun. When you add CSWruby18-gcc4, it delivers rbconfig.rb.gcc4 and triggers alternatives to update the symlink as it has higher priority than .sun. If you're finding that rbconfig can't be loaded, that would make me think that the alternatives handling isn't being triggered properly during the jumpstart. Can you provide the output of: alternatives --display rbconfig18 and ls -l /opt/csw/lib/ruby/1.8/*solaris2.9/rbconfig.rb* Right after the installation of facter in your finish script? From noreply at opencsw.org Wed Mar 21 17:35:17 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 17:35:17 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: <93ed64e9432b1acccc04d73d3a43f3cb@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 17:35 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009749) dcjackson (reporter) - 2012-03-21 17:35 https://www.opencsw.org/mantis/view.php?id=4924#c9749 ---------------------------------------------------------------------- Just to be clear, at present, I am running two pkgutils in sequence within my jumpstart finish script: First I run: --install CSWruby18-gcc4 Then I run: --install CSWpuppet After install/reboot, running apps like faster do not work with the error message above. # /opt/csw/sbin/alternatives --display rbconfig18 Installed alternatives for rbconfig18 are: /opt/csw/lib/ruby/1.8/i386-solaris2.9/rbconfig.rb rbconfig18 /opt/csw/lib/ruby/1.8/i386-solaris2.9/rbconfig.rb.sun 5 # ls -l /opt/csw/lib/ruby/1.8/*solaris2.9/rbconfig.rb* -rw-r--r-- 1 root bin 7325 Mar 24 2011 /opt/csw/lib/ruby/1.8/i386-solaris2.9/rbconfig.rb.sun # head -20 /opt/csw/lib/ruby/1.8/i386-solaris2.9/rbconfig.rb.sun # This file was created by mkconfig.rb when ruby was built. Any # changes made to this file will be lost the next time ruby is built. module Config RUBY_VERSION == "1.8.7" or raise "ruby lib version (1.8.7) doesn't match executable version (#{RUBY_VERSION})" TOPDIR = File.dirname(__FILE__).chomp!("/lib/ruby/1.8/i386-solaris2.9") DESTDIR = '' unless defined? DESTDIR CONFIG = {} CONFIG["DESTDIR"] = DESTDIR CONFIG["PATCHLEVEL"] = "334" CONFIG["INSTALL"] = '/opt/csw/bin/ginstall -c' CONFIG["EXEEXT"] = "" CONFIG["prefix"] = (TOPDIR || DESTDIR + "/opt/csw") CONFIG["ruby_install_name"] = "ruby18" CONFIG["RUBY_INSTALL_NAME"] = "ruby18" CONFIG["RUBY_SO_NAME"] = "ruby18" CONFIG["MANTYPE"] = "man" If you want additional info, I can change my finish script and re-run it to get exactly what you want, just let me know.... From noreply at opencsw.org Wed Mar 21 17:36:18 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 17:36:18 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: <0ecb69d0ba5b69cf4ac39ccad4e3d7ae@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 17:36 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009750) dcjackson (reporter) - 2012-03-21 17:36 https://www.opencsw.org/mantis/view.php?id=4924#c9750 ---------------------------------------------------------------------- FYI, I keep saying "faster" when of course I mean "facter". Autocorrect issue! From noreply at opencsw.org Wed Mar 21 18:44:09 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 18:44:09 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: <1482de9f2943fb7cdc0c6737e4fa3b20@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 18:44 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009751) dcjackson (reporter) - 2012-03-21 18:44 https://www.opencsw.org/mantis/view.php?id=4924#c9751 ---------------------------------------------------------------------- Another note. After the machine reboots post install, the problem persists. If I pkgutil --remove the CSWruby18-gcc4 and then re-install it, then all is well.... From noreply at opencsw.org Wed Mar 21 18:55:40 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 18:55:40 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: <79cad5a4c8543cd6337d235466b9584a@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 18:55 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009752) dam (administrator) - 2012-03-21 18:55 https://www.opencsw.org/mantis/view.php?id=4924#c9752 ---------------------------------------------------------------------- The problem is that the current alternatives implementation is not root relocation aware. We should address this when alternatives is redone. From noreply at opencsw.org Wed Mar 21 19:03:17 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 19:03:17 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 19:03 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009753) dcjackson (reporter) - 2012-03-21 19:03 https://www.opencsw.org/mantis/view.php?id=4924#c9753 ---------------------------------------------------------------------- Is there something I can do in my finish script to work around this problem? Move a file, create a new entry somewhere? Thanks From noreply at opencsw.org Wed Mar 21 21:37:18 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 21:37:18 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 21:37 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009754) markp (manager) - 2012-03-21 21:37 https://www.opencsw.org/mantis/view.php?id=4924#c9754 ---------------------------------------------------------------------- Ben, Dago, thanks for your input today - I realise this should be my ticket. I'm away on vacation this week, I'll check in every now and then to see how you're getting on with debugging. If facter needs re-rolling with an added dep, please let me know and I'll see to it next week. From noreply at opencsw.org Wed Mar 21 21:49:23 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 21:49:23 +0100 Subject: [bug-notifications] [python 0004031]: Get rid of CSWpython-rt package In-Reply-To: Message-ID: <78153eb7f9cb2bacb7849f22ef3506bf@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4031 ====================================================================== Reported By: maciej Assigned To: maciej ====================================================================== Project: python Issue ID: 4031 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-11-12 19:29 CET Last Modified: 2012-03-21 21:49 CET ====================================================================== Summary: Get rid of CSWpython-rt package Description: The runtime package is unhelpful. I'm getting into arguments with the release manager who insists that my packages must depend on CSWpython-rt instead of CSWpython. I explain that CSWpython depends on CSWpython-rt, but then the release manager says "I REPEAT". I've been also asked if my package really needs to depend on the CSWpython package and not just CSWpython-rt. But CSWpython-rt is not enough for any Python program to work. There's no usecase for it, and it creates confusion. Can it be removed? ====================================================================== ---------------------------------------------------------------------- (0009755) maciej (manager) - 2012-03-21 21:49 https://www.opencsw.org/mantis/view.php?id=4031#c9755 ---------------------------------------------------------------------- I removed 3 of 4 dependencies: - mod_python has been rebuilt - silvercity has been removed (the upstream is dead) - pysqlite has been removed (Python has inbuilt sqlite support) The last big one is ooocore. From noreply at opencsw.org Wed Mar 21 23:33:43 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 21 Mar 2012 23:33:43 +0100 Subject: [bug-notifications] [facter 0004924]: Are Facter and Puppet missing a dependency?J In-Reply-To: <407f41d323609f3c0e7b580b11e2bc0e> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4924 ====================================================================== Reported By: dcjackson Assigned To: ====================================================================== Project: facter Issue ID: 4924 Category: packaging Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-21 01:14 CET Last Modified: 2012-03-21 23:33 CET ====================================================================== Summary: Are Facter and Puppet missing a dependency?J Description: I am a newbie to opencsw. Used Blastwave for a long time.... Anyway, I install my OS via JumpStart Solaris10 u10 x86. First I install pkgutil, then puppet (within my jumpstart finish script) I then try to use faster within my finish script, and get this: /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4:in `require': no such file to load -- rbconfig (LoadError) from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/config.rb:4 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/resolution.rb:7 from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/util/fact.rb:2 from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter.rb:21 from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `require' from /opt/csw/lib/ruby/site_ruby/1.8/facter/application.rb:5:in `run' from /opt/csw/bin/facter:60 This problem also occurs after I reboot the machine and log in. I then did a pkgutil --install ruby18_gcc4 After that completed, faster worked fine. I am wondering if puppet/facter are missing a dependency? Of course, I could be doing something wrong, in general, or WRT installing this stuff within jumpstart. ====================================================================== ---------------------------------------------------------------------- (0009756) dcjackson (reporter) - 2012-03-21 23:33 https://www.opencsw.org/mantis/view.php?id=4924#c9756 ---------------------------------------------------------------------- During the install of puppet/facter/ruby during the jumpstart finish script, I see this: > Installing CSWruby18-1.8.7p334,REV=2011.03.24 (35/38) ... Registering 'ruby' alternative /opt/csw/bin/ruby18 ... sort: getexecname() failed /opt/csw/sbin/alternatives: Error 52: should not be in this code section. Inconsistency with files in /opt/csw/share/alternatives ? Registering 'rbconfig18' alternative /opt/csw/lib/ruby/1.8/i386-solaris2.9/rbconfig.rb.sun ... sort: getexecname() failed /opt/csw/sbin/alternatives: Error 52: should not be in this code section. Inconsistency with files in /opt/csw/share/alternatives ? Installation of was successful. I finally figured out that what I needed was for /opt/csw/lib/ruby/1.8/i386-solaris2.9/rbconfig.rb to symlink the the rbconfig.rb.sun file. I hacked that into my finish script, and it works now, at least after reboot. The other thing I have found is that running svccfg on the (puppet) manifest doesn't work from jumpstart. What does work is to take the manifest, change it to enabled='True', and put that manifest xml file into the /var/svc/manifest/network folder. When the machine reboots, it finds that, and enables the service. There are a lot of tricks/hacks to get things working during jumpstart/finish. one is to launch things under chroot e.g. "chroot /a the-command", so that command will have a view of the mounted filesystems without the /a where they are mounted during jumpstart/install.... So to summarize: It would be nice if ruby/alternative installed correctly under jumpstart. It would be nice if there was an an alternate smf manifest provided with enabled=true, that jumpstart users could find easily after pkg install, and stick into the /var/svc/manifest tree. I really appreciate the help and info here, and of course, the puppet/facter packages!!!! From noreply at opencsw.org Thu Mar 22 19:46:25 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 22 Mar 2012 19:46:25 +0100 Subject: [bug-notifications] [facter 0004925]: Please upgrade facter to version 1.6.6 Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4925 ====================================================================== Reported By: blkperl Assigned To: ====================================================================== Project: facter Issue ID: 4925 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-22 19:46 CET Last Modified: 2012-03-22 19:46 CET ====================================================================== Summary: Please upgrade facter to version 1.6.6 Description: facter 1.6.6 has some new zonename and zpool facts. Thanks, William ====================================================================== From noreply at opencsw.org Thu Mar 22 20:55:41 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 22 Mar 2012 20:55:41 +0100 Subject: [bug-notifications] [facter 0004925]: Please upgrade facter to version 1.6.6 In-Reply-To: Message-ID: <930c88103f48f5699991bdf33b07c4f0@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4925 ====================================================================== Reported By: blkperl Assigned To: markp ====================================================================== Project: facter Issue ID: 4925 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2012-03-22 19:46 CET Last Modified: 2012-03-22 20:55 CET ====================================================================== Summary: Please upgrade facter to version 1.6.6 Description: facter 1.6.6 has some new zonename and zpool facts. Thanks, William ====================================================================== From noreply at opencsw.org Sat Mar 24 20:47:07 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 24 Mar 2012 20:47:07 +0100 Subject: [bug-notifications] [cups 0002924]: A subsiture package for SUNWpcr and SUNWpcu should be provided In-Reply-To: Message-ID: <61462c43cd8878d7688d79fb95381f44@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2924 ====================================================================== Reported By: dam Assigned To: maciej ====================================================================== Project: cups Issue ID: 2924 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2008-07-08 07:43 CEST Last Modified: 2012-03-24 20:47 CET ====================================================================== Summary: A subsiture package for SUNWpcr and SUNWpcu should be provided Description: It would be cool to have a package containing links of /usr/bin/lp* to the cups binaries which acts as a plug-in-replacemenet for the supplied System V provided. The package should be flagged INCOMPATIBLE with the above package. ====================================================================== ---------------------------------------------------------------------- (0009758) dam (administrator) - 2012-03-24 20:47 https://www.opencsw.org/mantis/view.php?id=2924#c9758 ---------------------------------------------------------------------- A community answer has been provided that describes what needs to be done to replace Solaris Printing with Cups: http://www.opencsw.org/community/questions/75/how-can-i-replace-the-solaris-printing-system-with-opencsw-cups From noreply at opencsw.org Sat Mar 24 22:33:23 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 24 Mar 2012 22:33:23 +0100 Subject: [bug-notifications] [swaks 0003733]: Change to use csw version of perl in hash bang In-Reply-To: <385e2ece41d5bc9e17398aaf9e2e928c> Message-ID: <9ac5a26e0cb3cda6c6c66cff0b1496b3@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3733 ====================================================================== Reported By: rmacduff Assigned To: bonivart ====================================================================== Project: swaks Issue ID: 3733 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: assigned ====================================================================== Date Submitted: 2009-06-26 19:51 CEST Last Modified: 2012-03-24 22:33 CET ====================================================================== Summary: Change to use csw version of perl in hash bang Description: The perl used in the hash bang is the Sun provided version (/usr/bin/perl). This causes problems when trying to use CSW provided modules that certain options of swaks requires since the Sun version know nothing of these modules. Changing the path to point to the CSW provided perl would solve this problem. ====================================================================== From noreply at opencsw.org Sat Mar 24 22:34:13 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 24 Mar 2012 22:34:13 +0100 Subject: [bug-notifications] [swaks 0003733]: Change to use csw version of perl in hash bang In-Reply-To: <385e2ece41d5bc9e17398aaf9e2e928c> Message-ID: <04d963ec70b2dfd5de6f30035650877b@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=3733 ====================================================================== Reported By: rmacduff Assigned To: bonivart ====================================================================== Project: swaks Issue ID: 3733 Category: regular use Reproducibility: always Severity: tweak Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2009-06-26 19:51 CEST Last Modified: 2012-03-24 22:34 CET ====================================================================== Summary: Change to use csw version of perl in hash bang Description: The perl used in the hash bang is the Sun provided version (/usr/bin/perl). This causes problems when trying to use CSW provided modules that certain options of swaks requires since the Sun version know nothing of these modules. Changing the path to point to the CSW provided perl would solve this problem. ====================================================================== ---------------------------------------------------------------------- (0009759) bonivart (developer) - 2012-03-24 22:34 https://www.opencsw.org/mantis/view.php?id=3733#c9759 ---------------------------------------------------------------------- Version 20120320.0 uploaded to unstable with CSW perl as requested. From noreply at opencsw.org Sat Mar 24 22:42:29 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 24 Mar 2012 22:42:29 +0100 Subject: [bug-notifications] [facter 0004925]: Please upgrade facter to version 1.6.6 In-Reply-To: Message-ID: <17fd2176238a61049c75e63315a6ac13@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4925 ====================================================================== Reported By: blkperl Assigned To: markp ====================================================================== Project: facter Issue ID: 4925 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2012-03-22 19:46 CET Last Modified: 2012-03-24 22:42 CET ====================================================================== Summary: Please upgrade facter to version 1.6.6 Description: facter 1.6.6 has some new zonename and zpool facts. Thanks, William ====================================================================== ---------------------------------------------------------------------- (0009760) markp (manager) - 2012-03-24 22:42 https://www.opencsw.org/mantis/view.php?id=4925#c9760 ---------------------------------------------------------------------- Hi - 1.6.6 is available at http://buildfarm.opencsw.org/experimental.html#markp Could you test that please and let me know if it does what you require? I have installed it and it at least works fine on my x86 Solaris machine. I'm keen to know if it's got the additions in you're expecting though. Once you've confirmed you're happy, I'll release it to the main catalog. Thanks for your help. From noreply at opencsw.org Sun Mar 25 04:50:46 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 04:50:46 +0200 Subject: [bug-notifications] [php5_session 0004905]: php5_session does not enable because there is a bug in the php.ini In-Reply-To: <5dd394ac1d136ec007562674b53b525c> Message-ID: <63c21e84ae3be4060291b35ba7e4f197@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4905 ====================================================================== Reported By: jh Assigned To: bwalton ====================================================================== Project: php5_session Issue ID: 4905 Category: regular use Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-02-23 11:08 CET Last Modified: 2012-03-25 04:50 CEST ====================================================================== Summary: php5_session does not enable because there is a bug in the php.ini Description: php.ini does have extension = session and not extension=session.so so the module is not loaded. ====================================================================== ---------------------------------------------------------------------- (0009761) bwalton (administrator) - 2012-03-25 04:50 https://www.opencsw.org/mantis/view.php?id=4905#c9761 ---------------------------------------------------------------------- Updated packages pushed to unstable. From noreply at opencsw.org Sun Mar 25 04:51:45 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 04:51:45 +0200 Subject: [bug-notifications] [php5 0004911]: session_cache_limiter() is undefined in php5.3.10 In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4911 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4911 Category: regular use Reproducibility: always Severity: block Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-02-28 01:43 CET Last Modified: 2012-03-25 04:51 CEST ====================================================================== Summary: session_cache_limiter() is undefined in php5.3.10 Description: Mantis triggers the message "PHP Fatal error: Call to undefined function session_cache_limiter() in /opt/csw/share/www/mantis/htdocs/core/session_api.php on line 107" after upgrading php5 to 5.3.10,REV=2012.02.10 ====================================================================== ---------------------------------------------------------------------- (0009762) bwalton (administrator) - 2012-03-25 04:51 https://www.opencsw.org/mantis/view.php?id=4911#c9762 ---------------------------------------------------------------------- Updated packages pushed to unstable. From noreply at opencsw.org Sun Mar 25 04:52:55 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 04:52:55 +0200 Subject: [bug-notifications] [php5 0004910]: upgrade to 5.3.10, REV=2012.02.10 breaks installed libraries In-Reply-To: <9488db6b525cc76c6fc3a155ce8c41ce> Message-ID: <6791fc9b559ea9e91e0c5a05fdb68251@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4910 ====================================================================== Reported By: hudesd Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4910 Category: upgrade Reproducibility: always Severity: crash Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-02-27 23:23 CET Last Modified: 2012-03-25 04:52 CEST ====================================================================== Summary: upgrade to 5.3.10,REV=2012.02.10 breaks installed libraries Description: After upgrade to CSWphp5 5.3.10,REV=2012.02.10 and CSWphp5-mysql 5.3.10,REV=2012.02.10, Mantis no longer can reach the database (the database is up and running just fine: I use command-line mysql client and query mysql just fine). I am investigating to find the configuration file that got smacked. ====================================================================== ---------------------------------------------------------------------- (0009763) bwalton (administrator) - 2012-03-25 04:52 https://www.opencsw.org/mantis/view.php?id=4910#c9763 ---------------------------------------------------------------------- Problem resolved as noted in comments. From noreply at opencsw.org Sun Mar 25 04:54:14 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 04:54:14 +0200 Subject: [bug-notifications] [php5 0004904]: missing php5_zlib module In-Reply-To: <801b563bf69ecb65eec53d2f077f0fd1> Message-ID: <6969b5317b8ed1c61e0a6d148eed9bba@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4904 ====================================================================== Reported By: weyhmueller Assigned To: bwalton ====================================================================== Project: php5 Issue ID: 4904 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-02-22 15:08 CET Last Modified: 2012-03-25 04:54 CEST ====================================================================== Summary: missing php5_zlib module Description: I am missing the zlib module and the functions that it provides. e.g : "PHP Fatal error: Call to undefined function gzdeflate() in /var/opt/csw/nginx/simplesamlphp-1.8.2/lib/SAML2/HTTPRedirect.php on line 36" Is there a specific reason why this is not available? ====================================================================== ---------------------------------------------------------------------- (0009764) bwalton (administrator) - 2012-03-25 04:54 https://www.opencsw.org/mantis/view.php?id=4904#c9764 ---------------------------------------------------------------------- Updated packages pushed to unstable. From noreply at opencsw.org Sun Mar 25 08:45:03 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 08:45:03 +0200 Subject: [bug-notifications] [lighttpd 0002617]: Installtion error. In-Reply-To: <4cc663de1c98aeebfa7efa05587f6b20> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2617 ====================================================================== Reported By: Predrag.Zecevic Assigned To: drio ====================================================================== Project: lighttpd Issue ID: 2617 Category: packaging Reproducibility: always Severity: feature Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-10-09 08:12 CEST Last Modified: 2012-03-25 08:45 CEST ====================================================================== Summary: Installtion error. Description: copying default template lighttpd.conf.CSW to lighttpd.conf cp: cannot access /lighttpd.conf.CSW Configuring service in SMF ====================================================================== ---------------------------------------------------------------------- (0004837) drio (developer) - 2007-10-11 20:15 https://www.opencsw.org/mantis/view.php?id=2617#c4837 ---------------------------------------------------------------------- Fixed in latest revision. From noreply at opencsw.org Sun Mar 25 08:49:12 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 08:49:12 +0200 Subject: [bug-notifications] [syslog_ng 0004409]: Installing syslog_ng package disables default Solaris syslog service when autoenable_daemons=no In-Reply-To: <78e46ebcfd6e69544bed7cce590a23ae> Message-ID: <86707ef6345f5404c4d1a5d7d483312e@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4409 ====================================================================== Reported By: ckmehta1 Assigned To: maciej ====================================================================== Project: syslog_ng Issue ID: 4409 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2010-04-27 20:57 CEST Last Modified: 2012-03-25 08:49 CEST ====================================================================== Summary: Installing syslog_ng package disables default Solaris syslog service when autoenable_daemons=no Description: While syslog_ng respects the autoenable_daemons=no setting in /opt/csw/etc/csw.conf when you install the syslog_ng package, by default it ALWAYS disables the Solaris syslog service in the CSWsyslogng/install/preinstall script: /usr/sbin/svcadm disable svc:/system/system-log:default regardless of the autoenable setting. This is an issue if you want to install the package for availability over NFS/non-global-zones, but don't want to automatically disable syslog on the primary-machine's global-zone and leave the system without any form of syslog. Two possible autoenable settings that are applicable here would be: autoenable_daemons= autoenable_cswsyslog_ng= Hopefully the preinstall script can take the autoenable features into account in /opt/csw/etc/csw.conf ====================================================================== ---------------------------------------------------------------------- (0008240) skayser (administrator) - 2010-09-02 16:09 https://www.opencsw.org/mantis/view.php?id=4409#c8240 ---------------------------------------------------------------------- We are currently running into the same issue. We'd like to offer syslog-ng as a cluster service without actually touching the node local system-log service. Once we install CSWsyslogng on one of the nodes though, the node local system-log SMF service gets disabled. As we (at OpenCSW) have taken the route to not touch system services in other areas (postfix, cups), would it be possible to not disable system-log? At least if autoenable_daemons == no. From noreply at opencsw.org Sun Mar 25 08:54:02 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 08:54:02 +0200 Subject: [bug-notifications] [syslog_ng 0004409]: Installing syslog_ng package disables default Solaris syslog service when autoenable_daemons=no In-Reply-To: <78e46ebcfd6e69544bed7cce590a23ae> Message-ID: <96c97602ca1cfc5242ac774bea7b2ab1@www.opencsw.org> The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4409 ====================================================================== Reported By: ckmehta1 Assigned To: maciej ====================================================================== Project: syslog_ng Issue ID: 4409 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: feedback ====================================================================== Date Submitted: 2010-04-27 20:57 CEST Last Modified: 2012-03-25 08:54 CEST ====================================================================== Summary: Installing syslog_ng package disables default Solaris syslog service when autoenable_daemons=no Description: While syslog_ng respects the autoenable_daemons=no setting in /opt/csw/etc/csw.conf when you install the syslog_ng package, by default it ALWAYS disables the Solaris syslog service in the CSWsyslogng/install/preinstall script: /usr/sbin/svcadm disable svc:/system/system-log:default regardless of the autoenable setting. This is an issue if you want to install the package for availability over NFS/non-global-zones, but don't want to automatically disable syslog on the primary-machine's global-zone and leave the system without any form of syslog. Two possible autoenable settings that are applicable here would be: autoenable_daemons= autoenable_cswsyslog_ng= Hopefully the preinstall script can take the autoenable features into account in /opt/csw/etc/csw.conf ====================================================================== ---------------------------------------------------------------------- (0009765) maciej (manager) - 2012-03-25 08:54 https://www.opencsw.org/mantis/view.php?id=4409#c9765 ---------------------------------------------------------------------- I pushed a new syslog-ng package which does not disable syslogd. From noreply at opencsw.org Sun Mar 25 21:31:32 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 21:31:32 +0200 Subject: [bug-notifications] [lighttpd 0002598]: lighttpd.conf deleted on update In-Reply-To: Message-ID: <31923d63d79fa1608b833cb7cd9f1ca3@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=2598 ====================================================================== Reported By: james Assigned To: drio ====================================================================== Project: lighttpd Issue ID: 2598 Category: packaging Reproducibility: always Severity: major Priority: normal Status: closed Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-09-23 09:31 CEST Last Modified: 2012-03-25 21:31 CEST ====================================================================== Summary: lighttpd.conf deleted on update Description: File /opt/csw/etc/lighttpd.conf is a member of the CSWlighttpd package, on pkgrm this file is removed and so to is the users\'s configuration. Other packages avoid this by delivering a file.conf.CSW and create the file.conf a copy in postinstall. Preremove can delete if it\'s unchanged. ====================================================================== ---------------------------------------------------------------------- (0004780) drio (developer) - 2007-09-30 11:23 https://www.opencsw.org/mantis/view.php?id=2598#c4780 ---------------------------------------------------------------------- I have already submitted a new version to Phil, I\'ll close the bug as soon as I confirm that the new package doesn\'t have the bug. ---------------------------------------------------------------------- (0004822) drio (developer) - 2007-10-09 13:22 https://www.opencsw.org/mantis/view.php?id=2598#c4822 ---------------------------------------------------------------------- The code to fix this, is in place. Another bug has popped up after adding this new code though. I close this bug and I\'ll fix the other one [lighttpd 0002617] today at night. From noreply at opencsw.org Sun Mar 25 21:36:13 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 21:36:13 +0200 Subject: [bug-notifications] [ap2_modpython 0004734]: Change dependency from ap2_prefork to apache2 In-Reply-To: Message-ID: <3a4e8dd1e204f52d29812bfb71a1e65e@www.opencsw.org> The following issue has been ASSIGNED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4734 ====================================================================== Reported By: bwalton Assigned To: maciej ====================================================================== Project: ap2_modpython Issue ID: 4734 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: assigned ====================================================================== Date Submitted: 2011-04-02 16:30 CEST Last Modified: 2012-03-25 21:36 CEST ====================================================================== Summary: Change dependency from ap2_prefork to apache2 Description: Please update dependencies to match apache2 re-org. ====================================================================== From noreply at opencsw.org Sun Mar 25 21:57:24 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 21:57:24 +0200 Subject: [bug-notifications] [ap2_modpython 0004734]: Change dependency from ap2_prefork to apache2 In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4734 ====================================================================== Reported By: bwalton Assigned To: maciej ====================================================================== Project: ap2_modpython Issue ID: 4734 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-04-02 16:30 CEST Last Modified: 2012-03-25 21:57 CEST ====================================================================== Summary: Change dependency from ap2_prefork to apache2 Description: Please update dependencies to match apache2 re-org. ====================================================================== ---------------------------------------------------------------------- (0009766) maciej (manager) - 2012-03-25 21:57 https://www.opencsw.org/mantis/view.php?id=4734#c9766 ---------------------------------------------------------------------- Updated and pushed to unstable. From noreply at opencsw.org Sun Mar 25 22:03:37 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 22:03:37 +0200 Subject: [bug-notifications] [mysql5 0004798]: mysql_secure_installation returns error with current mysql5 package In-Reply-To: <19f5b3fb53d5338cbb8370c8f65d5eb9> Message-ID: <8676300cdb39c11e43d6c1e9b770c59a@www.opencsw.org> The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4798 ====================================================================== Reported By: AirOnSkin Assigned To: maciej ====================================================================== Project: mysql5 Issue ID: 4798 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-06-30 11:45 CEST Last Modified: 2012-03-25 22:03 CEST ====================================================================== Summary: mysql_secure_installation returns error with current mysql5 package Description: After installing mysql5 and running mysql_secure_installation the script breaks at the second action (removing anonymous user) because the first action (setting the root password) doesn't work. The new root password doesn't get applied (even if the output says so), hence the script has no rights for the second action. After typing the new root password twice the following appears (full log attached): Reloading privilege tables.. /opt/csw/mysql5/bin/sparcv9/mysql_secure_installation: !: not found ====================================================================== ---------------------------------------------------------------------- (0009767) maciej (manager) - 2012-03-25 22:03 https://www.opencsw.org/mantis/view.php?id=4798#c9767 ---------------------------------------------------------------------- Thanks for the feedback. From noreply at opencsw.org Sun Mar 25 22:04:13 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 22:04:13 +0200 Subject: [bug-notifications] [twisted 0004790]: twisted doesn't depend on zope In-Reply-To: <47e6641d7746aa789070b1e2fabe3814> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4790 ====================================================================== Reported By: igalic Assigned To: maciej ====================================================================== Project: twisted Issue ID: 4790 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-06-21 19:10 CEST Last Modified: 2012-03-25 22:04 CEST ====================================================================== Summary: twisted doesn't depend on zope Description: root at atvp1uascm031:~# /opt/csw/bin/twistd --help Traceback (most recent call last): File "/opt/csw/bin/twistd", line 18, in from twisted.scripts.twistd import run File "/opt/csw/lib/python/site-packages/twisted/scripts/twistd.py", line 11, in from twisted.application import app File "/opt/csw/lib/python/site-packages/twisted/application/app.py", line 7, in from twisted.python import runtime, log, usage, failure, util, logfile File "/opt/csw/lib/python/site-packages/twisted/python/log.py", line 17, in from zope.interface import Interface ImportError: No module named zope.interface root at atvp1uascm031:~# Clearly, twisted is lacking a dependency to py_zope_interface ====================================================================== ---------------------------------------------------------------------- (0009768) maciej (manager) - 2012-03-25 22:04 https://www.opencsw.org/mantis/view.php?id=4790#c9768 ---------------------------------------------------------------------- Twisted is now updated and contains the missing dep. http://www.opencsw.org/packages/py_twisted/ From noreply at opencsw.org Sun Mar 25 22:04:57 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 22:04:57 +0200 Subject: [bug-notifications] [mysql_dev 0004890]: Link to 64 bit config is missing In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4890 ====================================================================== Reported By: dam Assigned To: maciej ====================================================================== Project: mysql_dev Issue ID: 4890 Category: packaging Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2012-02-01 14:55 CET Last Modified: 2012-03-25 22:04 CEST ====================================================================== Summary: Link to 64 bit config is missing Description: The symlink to the 64 bit version of mysql_config is missing, whereas the 32 bit exists: /opt/csw/bin/mysql_config -> /opt/csw/bin/mysql_config-5.0 The result is 64 bit apps falling back to the 32 bit version pulling in the wrong flags. ====================================================================== ---------------------------------------------------------------------- (0009769) maciej (manager) - 2012-03-25 22:04 https://www.opencsw.org/mantis/view.php?id=4890#c9769 ---------------------------------------------------------------------- Done. From noreply at opencsw.org Sun Mar 25 22:08:32 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sun, 25 Mar 2012 22:08:32 +0200 Subject: [bug-notifications] [syslog_ng 0004785]: Please upgrade to 3.2.4 In-Reply-To: Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4785 ====================================================================== Reported By: dam Assigned To: maciej ====================================================================== Project: syslog_ng Issue ID: 4785 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2011-06-10 14:09 CEST Last Modified: 2012-03-25 22:08 CEST ====================================================================== Summary: Please upgrade to 3.2.4 Description: Please upgrade to 3.2.4 ====================================================================== ---------------------------------------------------------------------- (0009770) maciej (manager) - 2012-03-25 22:08 https://www.opencsw.org/mantis/view.php?id=4785#c9770 ---------------------------------------------------------------------- The version in unstable is now 3.2.5. From noreply at opencsw.org Mon Mar 26 04:00:07 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 26 Mar 2012 04:00:07 +0200 Subject: [bug-notifications] [gts 0004926]: Mangled RUNPATH and RPATH in gts Message-ID: <2de62c3d780278139d6ac19ef5073655@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4926 ====================================================================== Reported By: macareus Assigned To: ====================================================================== Project: gts Issue ID: 4926 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-26 04:00 CEST Last Modified: 2012-03-26 04:00 CEST ====================================================================== Summary: Mangled RUNPATH and RPATH in gts Description: For reasons completely unrelated to CSWgts, I wrote a script to sweep through all ELF executable files and show the union of all their RUNPATHs and/or RPATHs. Several files related to CSWgts have some "interesting" RPATH, RUNPATH components. Below is some diagnostic output. There is repetition, because the same problem is reported once for RPATH and again for RUNPATH. It looks like what were indented to be '$ORIGIN' and '$ISALIST' got mangled. Severity is actually unknown, because I have not tried out any of these programs. ====================================================================== From noreply at opencsw.org Mon Mar 26 08:59:02 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 26 Mar 2012 08:59:02 +0200 Subject: [bug-notifications] [gts 0004926]: Mangled RUNPATH and RPATH in gts In-Reply-To: Message-ID: <42f4fdd3f8a907598610e22cf41b6c73@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4926 ====================================================================== Reported By: macareus Assigned To: ====================================================================== Project: gts Issue ID: 4926 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-26 04:00 CEST Last Modified: 2012-03-26 08:59 CEST ====================================================================== Summary: Mangled RUNPATH and RPATH in gts Description: For reasons completely unrelated to CSWgts, I wrote a script to sweep through all ELF executable files and show the union of all their RUNPATHs and/or RPATHs. Several files related to CSWgts have some "interesting" RPATH, RUNPATH components. Below is some diagnostic output. There is repetition, because the same problem is reported once for RPATH and again for RUNPATH. It looks like what were indented to be '$ORIGIN' and '$ISALIST' got mangled. Severity is actually unknown, because I have not tried out any of these programs. ====================================================================== ---------------------------------------------------------------------- (0009771) maciej (developer) - 2012-03-26 08:59 https://www.opencsw.org/mantis/view.php?id=4926#c9771 ---------------------------------------------------------------------- It happens when the build system performs an extra interpolation of variables passed through the environment. If it happens inside shell, the result is that "/opt/csw/lib/$ISALIST" becomes "/opt/csw/lib/". If it happens inside Make, the result is "/opt/csw/lib/SALIST". If there is a problem with these, the problem is that the binaries are unable to find optimized libraries, because the SALIST entry in RPATH simply doesn't work. But it doesn't stop the binaries from working at all. From noreply at opencsw.org Mon Mar 26 11:23:10 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 26 Mar 2012 11:23:10 +0200 Subject: [bug-notifications] [poppler_dev 0004666]: GfxState.h In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4666 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: poppler_dev Issue ID: 4666 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2011-01-11 13:37 CET Last Modified: 2012-03-26 11:23 CEST ====================================================================== Summary: GfxState.h Description: Attempting to build with CSW poppler I get complaints of missing headers which are in the poppler source distribution. Shouldn't these be in CSWlibpopplerdev? Note also "The 0.16 branch is the stable release series. The latest such release is poppler-0.16.0.tar.gz, released on Dec 27, 2010" ====================================================================== ---------------------------------------------------------------------- (0009772) cgrzemba (manager) - 2012-03-26 11:23 https://www.opencsw.org/mantis/view.php?id=4666#c9772 ---------------------------------------------------------------------- for packaging this headers CONFIGURE_ARGS += --enable-xpdf-headers ### Install unsupported xpdf headers. is needed From noreply at opencsw.org Mon Mar 26 13:23:02 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 26 Mar 2012 13:23:02 +0200 Subject: [bug-notifications] [scrollkeeper 0003173]: Depend on CSWggettextrt In-Reply-To: <6ccf17d6226537c86df275a458086b4b> Message-ID: <4230b23c1bd604dc49820a7973486a6d@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3173 ====================================================================== Reported By: harpchad Assigned To: ====================================================================== Project: scrollkeeper Issue ID: 3173 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2009-02-14 02:59 CET Last Modified: 2012-03-26 13:23 CEST ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0009773) cgrzemba (developer) - 2012-03-26 13:23 https://www.opencsw.org/mantis/view.php?id=3173#c9773 ---------------------------------------------------------------------- Repackage for the new files system layout (/var/opt/csw instead of /opt/csw/var) From noreply at opencsw.org Mon Mar 26 13:27:41 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 26 Mar 2012 13:27:41 +0200 Subject: [bug-notifications] [scrollkeeper 0002042]: la file contains local path In-Reply-To: Message-ID: <8dcb836280a94539e2527c2ab83ef1e9@www.opencsw.org> A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2042 ====================================================================== Reported By: james Assigned To: ====================================================================== Project: scrollkeeper Issue ID: 2042 Category: other Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2006-12-03 12:22 CET Last Modified: 2012-03-26 13:27 CEST ====================================================================== Summary: la file contains local path Description: la file contains local path ====================================================================== ---------------------------------------------------------------------- (0009774) cgrzemba (developer) - 2012-03-26 13:27 https://www.opencsw.org/mantis/view.php?id=2042#c9774 ---------------------------------------------------------------------- repackaging will remove la files From noreply at opencsw.org Mon Mar 26 22:14:10 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 26 Mar 2012 22:14:10 +0200 Subject: [bug-notifications] [facter 0004925]: Please upgrade facter to version 1.6.6 In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4925 ====================================================================== Reported By: blkperl Assigned To: markp ====================================================================== Project: facter Issue ID: 4925 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: acknowledged ====================================================================== Date Submitted: 2012-03-22 19:46 CET Last Modified: 2012-03-26 22:14 CEST ====================================================================== Summary: Please upgrade facter to version 1.6.6 Description: facter 1.6.6 has some new zonename and zpool facts. Thanks, William ====================================================================== ---------------------------------------------------------------------- (0009775) blkperl (reporter) - 2012-03-26 22:14 https://www.opencsw.org/mantis/view.php?id=4925#c9775 ---------------------------------------------------------------------- Hi Mark, Looks like its working on my zones thanks! I was incorrect about the zfs facts though they appear to be only in master and should be released in facter 1.6.7 which hasn't be released yet. is_virtual => true virtual => zone From noreply at opencsw.org Mon Mar 26 22:26:01 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Mon, 26 Mar 2012 22:26:01 +0200 Subject: [bug-notifications] [facter 0004925]: Please upgrade facter to version 1.6.6 In-Reply-To: Message-ID: <6479b10c0c32d77038fbafb0c1da6dda@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4925 ====================================================================== Reported By: blkperl Assigned To: markp ====================================================================== Project: facter Issue ID: 4925 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-03-22 19:46 CET Last Modified: 2012-03-26 22:26 CEST ====================================================================== Summary: Please upgrade facter to version 1.6.6 Description: facter 1.6.6 has some new zonename and zpool facts. Thanks, William ====================================================================== ---------------------------------------------------------------------- (0009776) markp (manager) - 2012-03-26 22:26 https://www.opencsw.org/mantis/view.php?id=4925#c9776 ---------------------------------------------------------------------- Thanks for the feedback William. I'll release it to the main catalog. Cheers, Mark From noreply at opencsw.org Tue Mar 27 15:45:46 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 27 Mar 2012 15:45:46 +0200 Subject: [bug-notifications] [evince 0004886]: Bus error on S10 sparc In-Reply-To: <6c9e0ec5cc08e85b5fc7f7f5a2ccb556> Message-ID: <143d48cdc14a6c26242a4c34c31dddc7@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4886 ====================================================================== Reported By: ghenry Assigned To: cgrzemba ====================================================================== Project: evince Issue ID: 4886 Category: regular use Reproducibility: always Severity: crash Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-01-18 07:38 CET Last Modified: 2012-03-27 15:45 CEST ====================================================================== Summary: Bus error on S10 sparc Description: hello, when clicking on "View" menu, evince crashes. Here is the core trace: t at 1 (l at 1) terminated by signal BUS (invalid address alignment) 0x7f4775c8: _gtk_icon_cache_get_icon+0x0050: ld [%g5 + %o1], %l1 (dbx) up 0x7f47aacc: render_fallback_image+0x0074: call _gtk_icon_cache_get_icon ! 0x7f477578 (dbx) where current thread: t at 1 [1] _gtk_icon_cache_get_icon(0xdf4a0, 0x7f70488c, 0x2, 0x4, 0x67af0, 0x0), at 0x7f4775c8 =>[2] render_fallback_image(0xdc438, 0x1, 0x0, 0x1, 0x14bca8, 0x0), at 0x7f47aacc [3] IA__gtk_icon_set_render_icon(0xdc438, 0x1, 0x0, 0x1, 0x14bca8, 0x0), at 0x7f47ac68 [4] gtk_widget_render_icon(0x14bca8, 0x1, 0x1, 0x0, 0x18c00, 0x7f74a8a8), at 0x7f5fae74 [5] gtk_image_calc_size(0x14bca8, 0x10800, 0x4, 0x0, 0x80, 0x14bca8), at 0x7f4951e0 [6] gtk_image_size_request(0x14bca8, 0x14bcc4, 0xceb40, 0x7f74a8a8, 0x549c, 0x5400), at 0x7f495300 [7] g_closure_invoke(0xcd378, 0x0, 0x2, 0x209550, 0xffbfdd94, 0x7e472260), at 0x7e42cf1c [8] signal_emit_unlocked_R(0x0, 0x3e00808, 0x8cab4, 0x7e3aefc4, 0x8000, 0x7e4733e8), at 0x7e448350 [9] g_signal_emit_valist(0x14bca8, 0x209550, 0x0, 0xffbfdfc0, 0x4, 0x0), at 0x7e44770c [10] g_signal_emit_by_name(0x14bca8, 0x1000, 0x7f718230, 0x7e4733f0, 0x8caac, 0x7e45f668), at 0x7e447bdc [11] _gtk_size_group_compute_requisition(0x14bca8, 0xffbfe038, 0x7e472260, 0x7f74a8a8, 0x100, 0x1a800), at 0x7f53202c [12] gtk_image_menu_item_size_request(0x13e760, 0x13e77c, 0xceb40, 0x0, 0x5400, 0x7f74a8a8), at 0x7f496168 [13] g_closure_invoke(0xcd378, 0x0, 0x2, 0x22a430, 0xffbfe184, 0x7e472260), at 0x7e42cf1c [14] signal_emit_unlocked_R(0x0, 0x3e00808, 0x8cab4, 0x7e3aefc4, 0x8000, 0x7e4733e8), at 0x7e448350 [15] g_signal_emit_valist(0x13e760, 0x22a430, 0x0, 0xffbfe3b0, 0x4, 0x0), at 0x7e44770c [16] g_signal_emit_by_name(0x13e760, 0x1000, 0x7f718230, 0x7e4733f0, 0x8caac, 0x7e45f668), at 0x7e447bdc [17] _gtk_size_group_compute_requisition(0x13e760, 0xffbfe450, 0x9, 0x7f74a8a8, 0xffbfe458, 0x1a800), at 0x7f53202c [18] gtk_menu_size_request(0x1461d8, 0x1461f4, 0x0, 0x8, 0x7f70a998, 0x15), at 0x7f4bd14c [19] g_closure_invoke(0xcd378, 0x0, 0x2, 0x2093b0, 0xffbfe5ac, 0x7e472260), at 0x7e42cef0 [20] signal_emit_unlocked_R(0x0, 0x3e00808, 0x8cab4, 0x7e3aefc4, 0x8000, 0x7e4733e8), at 0x7e448350 [21] g_signal_emit_valist(0x1461d8, 0x2093b0, 0x0, 0xffbfe7d8, 0x4, 0x0), at 0x7e44770c [22] g_signal_emit_by_name(0x1461d8, 0x1000, 0x7f718230, 0x7e4733f0, 0x8caac, 0x7e45f668), at 0x7e447bdc [23] _gtk_size_group_compute_requisition(0x1461d8, 0xffbfe87c, 0xaa, 0x7f74a8a8, 0x0, 0x1a800), at 0x7f53202c [24] gtk_menu_position(0x1461d8, 0x1461d8, 0x7e45ce64, 0x2, 0x1000, 0xa8000), at 0x7f4c0374 [25] gtk_menu_popup(0x1461d8, 0x13e010, 0x13e490, 0x7f4c6b50, 0x13e490, 0xdb010), at 0x7f4bb820 [26] gtk_menu_item_real_popup_submenu(0x13e490, 0xaaa38, 0x7f74a8a8, 0xffd7c2a8, 0x283c00, 0x13e490), at 0x7f4c67f4 [27] gtk_real_menu_item_select(0x20000000, 0xda3c0, 0x7f74a8a8, 0xfffc1504, 0x3e800, 0x13e490), at 0x7f4c625c [28] g_closure_invoke(0x13dae0, 0x0, 0x1, 0x393b48, 0xffbfeb1c, 0x7e472260), at 0x7e42cef0 [29] signal_emit_unlocked_R(0x0, 0xd000800, 0x8cab4, 0x7e3aefc4, 0x8000, 0x7e4733e8), at 0x7e448350 [30] g_signal_emit_valist(0x13e490, 0x393b48, 0x0, 0xffbfed40, 0xd5800, 0x3), at 0x7e44770c [31] g_signal_emit(0x13e490, 0x8d, 0x0, 0x5554, 0x2ab750, 0x5400), at 0x7e447a18 [32] gtk_menu_item_select(0x13e490, 0x0, 0x7f74a8a8, 0x0, 0x3ec00, 0x0), at 0x7f4c4fbc [33] gtk_menu_shell_real_select_item(0x13e010, 0x13e490, 0xfffffffe, 0x0, 0xc8dc0, 0x7f70c174), at 0x7f4c979c [34] gtk_menu_shell_button_press(0x13e490, 0x13e010, 0x237b30, 0x80000000, 0x0, 0x80000000), at 0x7f4c88a4 [35] _gtk_marshal_BOOLEAN__BOXED(0xffbfefc8, 0x8, 0x7f4c8734, 0xe54c0, 0xffbfefc8, 0x13e010), at 0x7f4b5448 [36] g_closure_invoke(0xb93c0, 0xffbfefc8, 0x2, 0xe54c0, 0xffbfefb4, 0x7e472260), at 0x7e42cef0 [37] signal_emit_unlocked_R(0x7e3aefc4, 0x7dfc1ff0, 0x8cab4, 0xffbfefb4, 0x8000, 0x7e4733e8), at 0x7e448e94 [38] g_signal_emit_valist(0x0, 0xe54c0, 0x14, 0xffbff1dc, 0xffbff0d0, 0x0), at 0x7e447768 [39] g_signal_emit(0x13e010, 0x37, 0x0, 0x237b30, 0xffbff1ec, 0x2107c0), at 0x7e447a18 [40] gtk_widget_event_internal(0x13e010, 0x237b30, 0x5, 0x1a800, 0x5e54, 0x15), at 0x7f5f6c68 [41] gtk_propagate_event(0x13e010, 0x237b30, 0x7f70a360, 0x7f74a8a8, 0xfffbfbe0, 0x7f70a488), at 0x7f4b3d6c [42] gtk_main_do_event(0x0, 0x237b30, 0x13e490, 0x14, 0x20ad80, 0x7f74fe64), at 0x7f4b2990 [43] gdk_event_dispatch(0xa5068, 0x0, 0x0, 0x0, 0x14, 0x237b30), at 0x7eb64d28 [44] g_main_dispatch(0xab198, 0xffbff3b8, 0x7e3ac2f0, 0x0, 0xb0ac8, 0x0), at 0x7e2cb794 [45] g_main_context_dispatch(0xab198, 0x1, 0x1, 0x14, 0x8cb00, 0xab1a0), at 0x7e2cd1c4 [46] g_main_context_iterate(0xab198, 0x1, 0x1, 0x1, 0x7e3aefc4, 0x1), at 0x7e2cd744 [47] g_main_loop_run(0xc2898, 0x64, 0x1, 0x0, 0x7e3ac2f0, 0x7e3938fc), at 0x7e2ce008 [48] IA__gtk_main(0x30, 0x7f74a8a8, 0x1, 0x0, 0x7f74fe58, 0xc2898), at 0x7f4b1f58 [49] main(0x2, 0xffbff644, 0x0, 0x1, 0x7766c, 0x9a5dc), at 0x62aa4 ====================================================================== ---------------------------------------------------------------------- (0009777) cgrzemba (developer) - 2012-03-27 15:45 https://www.opencsw.org/mantis/view.php?id=4886#c9777 ---------------------------------------------------------------------- fixed in 2.30.3 From noreply at opencsw.org Tue Mar 27 15:48:14 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 27 Mar 2012 15:48:14 +0200 Subject: [bug-notifications] [evince 0004885]: Segmentation fault on S10 sparc In-Reply-To: Message-ID: <0c837414c9711491e295ea801ff6ca34@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4885 ====================================================================== Reported By: ghenry Assigned To: cgrzemba ====================================================================== Project: evince Issue ID: 4885 Category: regular use Reproducibility: always Severity: crash Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2012-01-18 06:55 CET Last Modified: 2012-03-27 15:48 CEST ====================================================================== Summary: Segmentation fault on S10 sparc Description: calypso-henry% /opt/csw/bin/evince --version GNOME evince 2.22.2 calypso-henry% /opt/csw/bin/evince Segmentation fault It seems related to xml. If i delete .gnome* files in my homedir, i can launch evince Trying the following: calypso-henry% \rm -rf .gnome* calypso-root% mv /opt/csw/share/evince/evince-toolbar.xml /opt/csw/share/evince/evince-toolbar.xml-BUG but it crashes again when i click on Edit menu ====================================================================== ---------------------------------------------------------------------- (0009778) cgrzemba (developer) - 2012-03-27 15:48 https://www.opencsw.org/mantis/view.php?id=4885#c9778 ---------------------------------------------------------------------- fixed in 2.30.3 From noreply at opencsw.org Tue Mar 27 16:21:47 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 27 Mar 2012 16:21:47 +0200 Subject: [bug-notifications] [evince 0004841]: Bus error In-Reply-To: Message-ID: <460aa5f2ba517c0fa96058d1f4f5d5eb@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4841 ====================================================================== Reported By: ghenry Assigned To: cgrzemba ====================================================================== Project: evince Issue ID: 4841 Category: regular use Reproducibility: always Severity: block Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2011-10-09 11:08 CEST Last Modified: 2012-03-27 16:21 CEST ====================================================================== Summary: Bus error Description: % evince --version GNOME evince 2.22.2 penelope-henry% evince /opt/csw/share/evince/evince-toolbar.xml:1: parser error : Document is empty ^ /opt/csw/share/evince/evince-toolbar.xml:1: parser error : Start tag expected, '<' not found ^ Bus error and no, the file evince-toolbar is not empty. ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0004842 /opt/csw/lib/libxml2.so.2 make evince c... ====================================================================== ---------------------------------------------------------------------- (0009779) cgrzemba (developer) - 2012-03-27 16:21 https://www.opencsw.org/mantis/view.php?id=4841#c9779 ---------------------------------------------------------------------- fixed in 2.30.3 From noreply at opencsw.org Tue Mar 27 16:22:52 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 27 Mar 2012 16:22:52 +0200 Subject: [bug-notifications] [evince 0004362]: Depend on CSWlibpoppler instead of CSWpoppler In-Reply-To: <58a01590d1ba1ce2e68ce37a5408160d> Message-ID: <5b5a60577693bc92a67c1bb8e7d9a3ed@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4362 ====================================================================== Reported By: hson Assigned To: cgrzemba ====================================================================== Project: evince Issue ID: 4362 Category: packaging Reproducibility: N/A Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2010-03-22 02:02 CET Last Modified: 2012-03-27 16:22 CEST ====================================================================== Summary: Depend on CSWlibpoppler instead of CSWpoppler Description: Poppler library have moved to CSWlibpoppler ====================================================================== ---------------------------------------------------------------------- (0009780) cgrzemba (developer) - 2012-03-27 16:22 https://www.opencsw.org/mantis/view.php?id=4362#c9780 ---------------------------------------------------------------------- fixed in 2.30.3 From noreply at opencsw.org Tue Mar 27 16:23:23 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 27 Mar 2012 16:23:23 +0200 Subject: [bug-notifications] [evince 0003343]: Depend on CSWggettextrt In-Reply-To: <3f2bc0679520d76e2e9d1f6653c4cad9> Message-ID: <0fd0802493792532fc74e382cac66750@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=3343 ====================================================================== Reported By: harpchad Assigned To: cgrzemba ====================================================================== Project: evince Issue ID: 3343 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2009-02-14 03:17 CET Last Modified: 2012-03-27 16:23 CEST ====================================================================== Summary: Depend on CSWggettextrt Description: Rutime for gettext is now in CSWggettextrt, please update dependencies from CSWgettext to CSWgettextrt ====================================================================== ---------------------------------------------------------------------- (0009781) cgrzemba (developer) - 2012-03-27 16:23 https://www.opencsw.org/mantis/view.php?id=3343#c9781 ---------------------------------------------------------------------- fixed in 2.30.3 From noreply at opencsw.org Tue Mar 27 16:23:58 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 27 Mar 2012 16:23:58 +0200 Subject: [bug-notifications] [evince 0002375]: openssl dependancy deprecated: please use openssl_rt instead In-Reply-To: <13b7779cc90408dd8ee2c05259f0c354> Message-ID: <3e2b4ccdb4b53c7b6344f202e6757f42@www.opencsw.org> The following issue has been RESOLVED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=2375 ====================================================================== Reported By: yann Assigned To: cgrzemba ====================================================================== Project: evince Issue ID: 2375 Category: packaging Reproducibility: always Severity: minor Priority: normal Status: resolved Resolution: fixed Fixed in Version: ====================================================================== Date Submitted: 2007-07-28 08:39 CEST Last Modified: 2012-03-27 16:23 CEST ====================================================================== Summary: openssl dependancy deprecated: please use openssl_rt instead Description: Following the openssl package split, the ssl libraries are now directly provided by the openssl_rt package. The openssl package still exists, it\'s a metapackage which will install openssl_rt, openssl_devel and openssl_utils which contains respectively the ssl libraries, the development files and the openssl utilities. Your package probably only use the ssl libraries, so to avoid installing unnecessary dependancies, please update your package to depend on openssl_rt rather than openssl. ====================================================================== ---------------------------------------------------------------------- (0009782) cgrzemba (developer) - 2012-03-27 16:23 https://www.opencsw.org/mantis/view.php?id=2375#c9782 ---------------------------------------------------------------------- fixed in 2.30.3 From noreply at opencsw.org Tue Mar 27 23:14:46 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Tue, 27 Mar 2012 23:14:46 +0200 Subject: [bug-notifications] [wgetpaste 0004316]: Relies on mktemp w/o explicit dependency In-Reply-To: <0b670b80834a1ca2c992effe04c6409e> Message-ID: The following issue has been CLOSED ====================================================================== https://www.opencsw.org/mantis/view.php?id=4316 ====================================================================== Reported By: skayser Assigned To: maciej ====================================================================== Project: wgetpaste Issue ID: 4316 Category: other Reproducibility: N/A Severity: minor Priority: normal Status: closed Resolution: open Fixed in Version: ====================================================================== Date Submitted: 2010-03-02 12:56 CET Last Modified: 2012-03-27 23:14 CEST ====================================================================== Summary: Relies on mktemp w/o explicit dependency Description: mktemp is available as /usr/bin/mktemp on Solaris 10, not on Solaris 8/9 though. Running it on a vanilla Solaris 8 system produces: /opt/csw/bin/wgetpaste: line 771: mktemp: command not found Your paste can be seen here: http://paste.pocoo.org/show/184640/ ====================================================================== ---------------------------------------------------------------------- (0009783) maciej (manager) - 2012-03-27 23:14 https://www.opencsw.org/mantis/view.php?id=4316#c9783 ---------------------------------------------------------------------- It's in the catalog for some time now. From noreply at opencsw.org Wed Mar 28 16:26:23 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 28 Mar 2012 16:26:23 +0200 Subject: [bug-notifications] [gangliaweb 0004927]: Missing dependency on php5_gd Message-ID: <90e8450ab261239fb758ce6781668f93@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4927 ====================================================================== Reported By: peter-oliver Assigned To: ====================================================================== Project: gangliaweb Issue ID: 4927 Category: Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-28 16:26 CEST Last Modified: 2012-03-28 16:26 CEST ====================================================================== Summary: Missing dependency on php5_gd Description: Pie charts are missing from the Ganglia web interface. The following error appears in the Apache log: PHP Fatal error: Call to undefined function ImageCreate() in /opt/csw/share/www/ganglia/pie.php on line 121 This is because The php5_gd packages is not automatically installed when gangliaweb is installed. ====================================================================== From noreply at opencsw.org Wed Mar 28 16:53:01 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Wed, 28 Mar 2012 16:53:01 +0200 Subject: [bug-notifications] [gangliaweb 0004927]: Missing dependency on php5_gd In-Reply-To: <628ae265c3d22deb3261545e1eb0d8d7> Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4927 ====================================================================== Reported By: peter-oliver Assigned To: ====================================================================== Project: gangliaweb Issue ID: 4927 Category: Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-28 16:26 CEST Last Modified: 2012-03-28 16:53 CEST ====================================================================== Summary: Missing dependency on php5_gd Description: Pie charts are missing from the Ganglia web interface. The following error appears in the Apache log: PHP Fatal error: Call to undefined function ImageCreate() in /opt/csw/share/www/ganglia/pie.php on line 121 This is because The php5_gd packages is not automatically installed when gangliaweb is installed. ====================================================================== ---------------------------------------------------------------------- (0009784) daniel (manager) - 2012-03-28 16:53 https://www.opencsw.org/mantis/view.php?id=4927#c9784 ---------------------------------------------------------------------- This is fixed in the packaging of Ganglia v3.3.5 The new packages are currently in the experimental area: http://buildfarm.opencsw.org/experimental/ganglia/ From noreply at opencsw.org Thu Mar 29 10:27:08 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 29 Mar 2012 10:27:08 +0200 Subject: [bug-notifications] [monit 0004928]: Please upgrade to 5.3.2 Message-ID: The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4928 ====================================================================== Reported By: max_meyer Assigned To: ====================================================================== Project: monit Issue ID: 4928 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-29 10:27 CEST Last Modified: 2012-03-29 10:27 CEST ====================================================================== Summary: Please upgrade to 5.3.2 Description: http://www.mmonit.com/monit/download/ ====================================================================== From noreply at opencsw.org Thu Mar 29 11:56:12 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 29 Mar 2012 11:56:12 +0200 Subject: [bug-notifications] [monit 0004928]: Please upgrade to 5.3.2 In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4928 ====================================================================== Reported By: max_meyer Assigned To: ====================================================================== Project: monit Issue ID: 4928 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-29 10:27 CEST Last Modified: 2012-03-29 11:56 CEST ====================================================================== Summary: Please upgrade to 5.3.2 Description: http://www.mmonit.com/monit/download/ ====================================================================== ---------------------------------------------------------------------- (0009785) dam (administrator) - 2012-03-29 11:56 https://www.opencsw.org/mantis/view.php?id=4928#c9785 ---------------------------------------------------------------------- Monit is currently unmaintained. How desperately do you need it? From noreply at opencsw.org Thu Mar 29 14:21:25 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Thu, 29 Mar 2012 14:21:25 +0200 Subject: [bug-notifications] [imagemagick 0004929]: montage ld.so.1: montage: fatal: relocation error: Message-ID: <93806f807eb176d2f882ab257426fac9@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4929 ====================================================================== Reported By: wcohrs Assigned To: ====================================================================== Project: imagemagick Issue ID: 4929 Category: regular use Reproducibility: always Severity: crash Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-29 14:21 CEST Last Modified: 2012-03-29 14:21 CEST ====================================================================== Summary: montage ld.so.1: montage: fatal: relocation error: Description: SunOS 5.10 Generic_147441-13 i86pc i386 i86pc montage -version Version: ImageMagick 6.7.3-10 2011-12-14 Q16 http://www.imagemagick.org montage -thumbnail 10x10 AVEC.JPG a.jpg ld.so.1: montage: fatal: relocation error: file /opt/csw/lib/amd64/libfontconfig.so.1: symbol XML_ParserCreate: referenced symbol not found Killed with convert work ====================================================================== From noreply at opencsw.org Fri Mar 30 09:41:37 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 30 Mar 2012 09:41:37 +0200 Subject: [bug-notifications] [apache2 0004930]: mod_ldap needs another package installed (missing package dependency?) Message-ID: <4cba30b923a5408f62a4450867bd0e8f@www.opencsw.org> The following issue has been SUBMITTED. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4930 ====================================================================== Reported By: max_meyer Assigned To: ====================================================================== Project: apache2 Issue ID: 4930 Category: regular use Reproducibility: always Severity: major Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-30 09:41 CEST Last Modified: 2012-03-30 09:41 CEST ====================================================================== Summary: mod_ldap needs another package installed (missing package dependency?) Description: I stumbled over an issue using mod_ldap. You get a HTTP error 500 with [Fri Mar 30 09:22:28 2012] [info] [client ] [389] auth_ldap authenticate: user authentication failed; URI /cgi-bin/gitweb.cgi [LDAP: ldap initialization failed][Unknown (private extension) error] in the error log file and ENOENT with truss 389: stat64("/opt/csw/apache2/lib/apr_ldap-1.so", 0xFFBFC330) Err#2 ENOENT 389: stat64("/opt/csw/apache2/lib/apr-util-1/apr_ldap-1.so", 0xFFBFC330) Err#2 ENOENT 389: stat64("/opt/csw/lib/apr-util-1/apr_ldap-1.so", 0xFFBFC330) Err#2 ENOENT The cause for the problem was a missing package. CSWapache2 doesn't depends on it. You need to install libaprutil1_ldap (CSWlibaprutil1-ldap, http://www.opencsw.org/packages/CSWlibaprutil1-ldap/) by hand to get it running. It might be worth to add that dependency to the apache2 package. Cheers, MaxMeyer ====================================================================== From noreply at opencsw.org Fri Mar 30 09:47:16 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Fri, 30 Mar 2012 09:47:16 +0200 Subject: [bug-notifications] [monit 0004928]: Please upgrade to 5.3.2 In-Reply-To: Message-ID: A NOTE has been added to this issue. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4928 ====================================================================== Reported By: max_meyer Assigned To: ====================================================================== Project: monit Issue ID: 4928 Category: upgrade Reproducibility: have not tried Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 2012-03-29 10:27 CEST Last Modified: 2012-03-30 09:47 CEST ====================================================================== Summary: Please upgrade to 5.3.2 Description: http://www.mmonit.com/monit/download/ ====================================================================== ---------------------------------------------------------------------- (0009786) max_meyer (reporter) - 2012-03-30 09:47 https://www.opencsw.org/mantis/view.php?id=4928#c9786 ---------------------------------------------------------------------- Today: not that much. Maybe in the future. I installed on the first box (debian) to get used to it and see if it's suitable for our needs. :) Just saw that is outdated. Cheers MaxMeyer From noreply at opencsw.org Sat Mar 31 21:12:27 2012 From: noreply at opencsw.org (Mantis Bug Tracker) Date: Sat, 31 Mar 2012 21:12:27 +0200 Subject: [bug-notifications] [apache2 0004930]: mod_ldap needs another package installed (missing package dependency?) In-Reply-To: Message-ID: The following issue requires your FEEDBACK. ====================================================================== https://www.opencsw.org/mantis/view.php?id=4930 ====================================================================== Reported By: max_meyer Assigned To: bwalton ====================================================================== Project: apache2 Issue ID: 4930 Category: regular use Reproducibility: always Severity: major Priority: normal Status: feedback ====================================================================== Date Submitted: 2012-03-30 09:41 CEST Last Modified: 2012-03-31 21:12 CEST ====================================================================== Summary: mod_ldap needs another package installed (missing package dependency?) Description: I stumbled over an issue using mod_ldap. You get a HTTP error 500 with [Fri Mar 30 09:22:28 2012] [info] [client ] [389] auth_ldap authenticate: user authentication failed; URI /cgi-bin/gitweb.cgi [LDAP: ldap initialization failed][Unknown (private extension) error] in the error log file and ENOENT with truss 389: stat64("/opt/csw/apache2/lib/apr_ldap-1.so", 0xFFBFC330) Err#2 ENOENT 389: stat64("/opt/csw/apache2/lib/apr-util-1/apr_ldap-1.so", 0xFFBFC330) Err#2 ENOENT 389: stat64("/opt/csw/lib/apr-util-1/apr_ldap-1.so", 0xFFBFC330) Err#2 ENOENT The cause for the problem was a missing package. CSWapache2 doesn't depends on it. You need to install libaprutil1_ldap (CSWlibaprutil1-ldap, http://www.opencsw.org/packages/CSWlibaprutil1-ldap/) by hand to get it running. It might be worth to add that dependency to the apache2 package. Cheers, MaxMeyer ====================================================================== ---------------------------------------------------------------------- (0009787) bwalton (administrator) - 2012-03-31 21:12 https://www.opencsw.org/mantis/view.php?id=4930#c9787 ---------------------------------------------------------------------- Hi Max, Can you tell me which binary has this dependency? I'll make the required fixes when I know that. Thanks -Ben