From william at wbonnet.net Mon Nov 10 11:19:15 2008 From: william at wbonnet.net (William Bonnet) Date: Mon, 10 Nov 2008 11:19:15 +0100 Subject: [csw-buildfarm] Test Message-ID: <49180AA3.7010601@wbonnet.net> Sorry for the noise :) From trygvel at opencsw.org Thu Nov 13 16:38:31 2008 From: trygvel at opencsw.org (=?ISO-8859-1?Q?Trygve_Laugst=F8l?=) Date: Thu, 13 Nov 2008 16:38:31 +0100 Subject: [csw-buildfarm] Package installation request Message-ID: <491C49F7.8090306@opencsw.org> Hi Can I get mercurial installed on login.bo please? -- Trygve From dam at opencsw.org Thu Nov 13 16:41:57 2008 From: dam at opencsw.org (Dagobert Michelsen) Date: Thu, 13 Nov 2008 16:41:57 +0100 Subject: [csw-buildfarm] Package installation request In-Reply-To: <491C49F7.8090306@opencsw.org> References: <491C49F7.8090306@opencsw.org> Message-ID: <92089780-14F5-474B-A337-7CFA5BADFCCA@opencsw.org> Hi Trygve, Am 13.11.2008 um 16:38 schrieb Trygve Laugst?l: > Can I get mercurial installed on login.bo please? Done. Best regards -- Dago From trygvel at opencsw.org Fri Nov 14 12:31:30 2008 From: trygvel at opencsw.org (=?ISO-8859-1?Q?Trygve_Laugst=F8l?=) Date: Fri, 14 Nov 2008 12:31:30 +0100 Subject: [csw-buildfarm] screen on login.bo Message-ID: <491D6192.7020008@opencsw.org> Hi Can I get screen installed on login.bo, please? -- Trygve From dam at opencsw.org Fri Nov 14 12:55:53 2008 From: dam at opencsw.org (Dagobert Michelsen) Date: Fri, 14 Nov 2008 12:55:53 +0100 Subject: [csw-buildfarm] screen on login.bo In-Reply-To: <491D6192.7020008@opencsw.org> References: <491D6192.7020008@opencsw.org> Message-ID: <841E08FB-8114-4FF7-A354-35445DEA115B@opencsw.org> Hi Trygve, Am 14.11.2008 um 12:31 schrieb Trygve Laugst?l: > Can I get screen installed on login.bo, please? Screen is already installed. Got any problems with it? Best regards -- Dago From ihsan at opencsw.org Fri Nov 14 16:18:30 2008 From: ihsan at opencsw.org (Ihsan Dogan) Date: Fri, 14 Nov 2008 16:18:30 +0100 Subject: [csw-buildfarm] test Message-ID: <491D96C6.9020301@opencsw.org> test, please ignore -- ihsan at dogan.ch http://blog.dogan.ch/ From trygvel at opencsw.org Sat Nov 15 14:16:13 2008 From: trygvel at opencsw.org (=?ISO-8859-1?Q?Trygve_Laugst=F8l?=) Date: Sat, 15 Nov 2008 14:16:13 +0100 Subject: [csw-buildfarm] pkg-get -i bash && usermod -s /opt/csw/bin/bash trygvel Message-ID: <491ECB9D.6090301@opencsw.org> Please :) -- Trygve From pfelecan at opencsw.org Sat Nov 15 19:08:58 2008 From: pfelecan at opencsw.org (Peter FELECAN) Date: Sat, 15 Nov 2008 19:08:58 +0100 Subject: [csw-buildfarm] access to the build-farm Message-ID: How can I access the the new build-farm? Is my public key available on the login and build system(s). I searched for a document showing the build-farm infrastructure and instructions on how to use it. Obviously, I didn't find the information. Is the wiki a good place to put this kind of information? Also, an usage charter for the build-farm(s) is something that should be defined and published. -- Peter FELECAN mailto:pfelecan at acm.org From dam at opencsw.org Sat Nov 15 23:46:34 2008 From: dam at opencsw.org (Dagobert Michelsen) Date: Sat, 15 Nov 2008 23:46:34 +0100 Subject: [csw-buildfarm] access to the build-farm In-Reply-To: References: Message-ID: Hi Peter, Am 15.11.2008 um 19:08 schrieb Peter FELECAN: > How can I access the the new build-farm? Is my public key available on > the login and build system(s). Please send me the current key, so I can set up your account. The buildfarm documentation is here and at the buildfarm in /etc/SETUP. > I searched for a document showing the build-farm infrastructure and > instructions on how to use it. Obviously, I didn't find the > information. Is the wiki a good place to put this kind of information? Yes. Feel free to start a wiki page writing up what you think is missing :-) The current docs are, well, very basic. > Also, an usage charter for the build-farm(s) is something that should > be defined and published. Umh, build packages for OpenCSW? Anything else? Best regards -- Dago From pfelecan at opencsw.org Sun Nov 16 10:46:14 2008 From: pfelecan at opencsw.org (Peter FELECAN) Date: Sun, 16 Nov 2008 10:46:14 +0100 Subject: [csw-buildfarm] access to the build-farm In-Reply-To: (Dagobert Michelsen's message of "Sat\, 15 Nov 2008 23\:46\:34 +0100") References: Message-ID: Dagobert Michelsen writes: > Am 15.11.2008 um 19:08 schrieb Peter FELECAN: >> How can I access the the new build-farm? Is my public key available on >> the login and build system(s). > > Please send me the current key, so I can set up your account. The I sent the key in a private message. > buildfarm documentation is here > > and at the buildfarm in /etc/SETUP. The cited page is accessible but there is no reference to it on any other page, such as the stadards page itself or the build standards page. >> I searched for a document showing the build-farm infrastructure and >> instructions on how to use it. Obviously, I didn't find the >> information. Is the wiki a good place to put this kind of information? > > Yes. Feel free to start a wiki page writing up what > you think is missing :-) The current docs are, well, very basic. Is there a need to have a specific account for accessing the Wiki? >> Also, an usage charter for the build-farm(s) is something that should >> be defined and published. > > Umh, build packages for OpenCSW? Anything else? Exactly that. I think that it must be explicit even if implicitly is obvious; better to have explicit definitions. -- Peter FELECAN mailto:pfelecan at acm.org From fred at opencsw.org Sun Nov 16 12:27:15 2008 From: fred at opencsw.org (Frederic Van De Velde) Date: Sun, 16 Nov 2008 12:27:15 +0100 Subject: [csw-buildfarm] please install pm_appconfig on buildfarm Message-ID: <120A7F0D-E580-4966-8A30-4E0CFC9F995C@opencsw.org> please can you install pm_appconfig on buildfarm Fred. From fred at opencsw.org Sun Nov 16 12:31:11 2008 From: fred at opencsw.org (Frederic Van De Velde) Date: Sun, 16 Nov 2008 12:31:11 +0100 Subject: [csw-buildfarm] pkg-get -i bash && usermod -s /opt/csw/bin/bash trygvel In-Reply-To: <491ECB9D.6090301@opencsw.org> References: <491ECB9D.6090301@opencsw.org> Message-ID: <0272A938-E0CE-453A-8712-4BAA0DE7E4A3@opencsw.org> Also for me please usermod -s /opt/csw/bin/bash fred On 15 Nov 2008, at 14:16, Trygve Laugst?l wrote: > Please :) > > -- > Trygve > _______________________________________________ > buildfarm mailing list > buildfarm at lists.opencsw.org > https://lists.opencsw.org/mailman/listinfo/buildfarm From dam at baltic-online.de Thu Nov 6 09:06:35 2008 From: dam at baltic-online.de (Dagobert Michelsen) Date: Thu, 6 Nov 2008 09:06:35 +0100 Subject: [csw-buildfarm] Test Message-ID: -- Dagobert Michelsen (Leiter IT) Baltic Online Computer GmbH Firmensitz: Alter Markt 1-2, 24103 Kiel, Telefon: +49 431 54003-0 Gesch?ftsf?hrer: Erik Cickovskis, Amtsgericht Kiel, HRB 3756 "Of course computer servers don't need thrust, since they generally don't go anywhere." -- Comment in TR on new HP server turbine fans From frederic.vandevelde at paradigmo.com Sun Nov 16 12:23:39 2008 From: frederic.vandevelde at paradigmo.com (Frederic Van De Velde) Date: Sun, 16 Nov 2008 12:23:39 +0100 Subject: [csw-buildfarm] pkg-get -i bash && usermod -s /opt/csw/bin/bash trygvel In-Reply-To: <491ECB9D.6090301@opencsw.org> References: <491ECB9D.6090301@opencsw.org> Message-ID: Also for me please usermod -s /opt/csw/bin/bash fred On 15 Nov 2008, at 14:16, Trygve Laugst?l wrote: > Please :) > > -- > Trygve > _______________________________________________ > buildfarm mailing list > buildfarm at lists.opencsw.org > https://lists.opencsw.org/mailman/listinfo/buildfarm -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 2449 bytes Desc: not available URL: From pfelecan at opencsw.org Sun Nov 16 15:12:11 2008 From: pfelecan at opencsw.org (Peter FELECAN) Date: Sun, 16 Nov 2008 15:12:11 +0100 Subject: [csw-buildfarm] bash as default shell for pfelecan user Message-ID: I would like to have Bash as the default for my accounts on the build-farm. TIA -- Peter From dam at opencsw.org Sun Nov 16 15:38:27 2008 From: dam at opencsw.org (Dagobert Michelsen) Date: Sun, 16 Nov 2008 15:38:27 +0100 Subject: [csw-buildfarm] access to the build-farm In-Reply-To: References: Message-ID: <96CF325C-0077-4107-9EDC-1ACB1AE9A04F@opencsw.org> Hi Peter, Am 16.11.2008 um 10:46 schrieb Peter FELECAN: >> buildfarm documentation is here >> >> and at the buildfarm in /etc/SETUP. > > The cited page is accessible but there is no reference to it on any > other page, such as the stadards page itself or the build standards > page. It should have a link. Phil, you did link it, yes? >>> I searched for a document showing the build-farm infrastructure and >>> instructions on how to use it. Obviously, I didn't find the >>> information. Is the wiki a good place to put this kind of >>> information? >> >> Yes. Feel free to start a wiki page writing up what >> you think is missing :-) The current docs are, well, very basic. > > Is there a need to have a specific account for accessing the Wiki? Yes. Please get yourself an account at and Peter Bonivart will happily give you write permissions. I have started to write docs for setting up and using build servers at >>> Also, an usage charter for the build-farm(s) is something that >>> should >>> be defined and published. >> >> Umh, build packages for OpenCSW? Anything else? > > Exactly that. I think that it must be explicit even if implicitly > is obvious; better to have explicit definitions. Added to the wiki. Best regards -- Dago From phil at bolthole.com Mon Nov 17 17:57:35 2008 From: phil at bolthole.com (Philip Brown) Date: Mon, 17 Nov 2008 08:57:35 -0800 Subject: [csw-buildfarm] access to the build-farm In-Reply-To: <96CF325C-0077-4107-9EDC-1ACB1AE9A04F@opencsw.org>; from dam@opencsw.org on Sun, Nov 16, 2008 at 03:38:27PM +0100 References: <96CF325C-0077-4107-9EDC-1ACB1AE9A04F@opencsw.org> Message-ID: <20081117085735.D21898@bolthole.com> On Sun, Nov 16, 2008 at 03:38:27PM +0100, Dagobert Michelsen wrote: > Hi Peter, > > Am 16.11.2008 um 10:46 schrieb Peter FELECAN: > >> buildfarm documentation is here > >> > >> and at the buildfarm in /etc/SETUP. > > > > The cited page is accessible but there is no reference to it on any > > other page, such as the stadards page itself or the build standards > > page. > > It should have a link. Phil, you did link it, yes? It was linked to on the welcome page, but I have now added additional links, and made the link more noticable. From bwalton at artsci.utoronto.ca Tue Nov 18 16:04:51 2008 From: bwalton at artsci.utoronto.ca (Ben Walton) Date: Tue, 18 Nov 2008 10:04:51 -0500 Subject: [csw-buildfarm] pkg-get -i bash && usermod -s /opt/csw/bin/bash trygvel In-Reply-To: <0272A938-E0CE-453A-8712-4BAA0DE7E4A3@opencsw.org> References: <491ECB9D.6090301@opencsw.org> <0272A938-E0CE-453A-8712-4BAA0DE7E4A3@opencsw.org> Message-ID: <1227020639-sup-7953@ntdws12.chass.utoronto.ca> Excerpts from Frederic Van De Velde's message of Sun Nov 16 06:31:11 -0500 2008: > usermod -s /opt/csw/bin/bash fred s/fred/bwalton/ Please and thank you... -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From fred at opencsw.org Sun Nov 16 12:27:15 2008 From: fred at opencsw.org (Frederic Van De Velde) Date: Sun, 16 Nov 2008 12:27:15 +0100 Subject: [csw-buildfarm] please install pm_logdispatch on buildfarm Message-ID: <120A7F0D-E580-4966-8A30-4E0CFC9F995C@opencsw.org> please install pm_logdispatch on buildfarm Fred. From dam at opencsw.org Wed Nov 19 10:12:42 2008 From: dam at opencsw.org (Dagobert Michelsen) Date: Wed, 19 Nov 2008 10:12:42 +0100 Subject: [csw-buildfarm] please install pm_logdispatch on buildfarm In-Reply-To: <120A7F0D-E580-4966-8A30-4E0CFC9F995C@opencsw.org> References: <120A7F0D-E580-4966-8A30-4E0CFC9F995C@opencsw.org> Message-ID: <685DCBFB-CBD2-4E7D-8D0D-970C40336169@opencsw.org> Hi Frederic, Am 16.11.2008 um 12:27 schrieb Frederic Van De Velde: > please install pm_logdispatch on buildfarm Done. Best regards -- Dago From bonivart at opencsw.org Thu Nov 20 18:05:51 2008 From: bonivart at opencsw.org (Peter Bonivart) Date: Thu, 20 Nov 2008 18:05:51 +0100 Subject: [csw-buildfarm] libmilter installed on build8s/x Message-ID: <625385e30811200905k6389a4faq21518599a6901f13@mail.gmail.com> Could you please install libmilter on build8s and build8x? -- /peter From dam at opencsw.org Thu Nov 20 21:15:15 2008 From: dam at opencsw.org (Dagobert Michelsen) Date: Thu, 20 Nov 2008 21:15:15 +0100 Subject: [csw-buildfarm] libmilter installed on build8s/x In-Reply-To: <625385e30811200905k6389a4faq21518599a6901f13@mail.gmail.com> References: <625385e30811200905k6389a4faq21518599a6901f13@mail.gmail.com> Message-ID: <8203598E-86B7-4464-B4FA-8C407B9FF6BD@opencsw.org> Hi Peter, Am 20.11.2008 um 18:05 schrieb Peter Bonivart: > Could you please install libmilter on build8s and build8x? Done. Best regards -- Dago From james at opencsw.org Sun Nov 23 16:33:58 2008 From: james at opencsw.org (James Lee) Date: Sun, 23 Nov 2008 15:33:58 GMT Subject: [csw-buildfarm] CSWlibx11 Message-ID: <20081123.15335800.1211124557@gyor.oxdrove.co.uk> CSWlibx11 is installed on the build machine but is not a released package. It's not easy to avoid /opt/csw/lib/libX11.so.6 and pick up other software from /opt/csw/lib. Please can we remove or release CSWlibx11. As a general note can we NOT install packages that are not released, this could have been installed locally and picked up where needed with -L. $ pkginfo -l CSWlibx11 PKGINST: CSWlibx11 NAME: libx11 - X11 client-side library CATEGORY: application ARCH: i386 VERSION: 1.1.5,REV=2008.11.19 VENDOR: http://xorg.freedesktop.org/releases/individual/lib/ packaged for CSW by William Bonnet PSTAMP: wbonnet at build8x-r2317UNCOMMITTED-20081119175650 INSTDATE: Nov 19 2008 19:55 HOTLINE: http://www.opencsw.org/bugtrack/ EMAIL: wbonnet at opencsw.org STATUS: completely installed FILES: 1066 installed pathnames 5 shared pathnames 65 directories 4 executables 11363 blocks used (approx) From james at opencsw.org Sun Nov 23 16:40:20 2008 From: james at opencsw.org (James Lee) Date: Sun, 23 Nov 2008 15:40:20 GMT Subject: [csw-buildfarm] Clocks have wrong time Message-ID: <20081123.15402000.3172908758@gyor.oxdrove.co.uk> The build machine clocks are in sync with each other but are several minutes adrift from real time. James. From james at opencsw.org Sun Nov 23 16:42:58 2008 From: james at opencsw.org (James Lee) Date: Sun, 23 Nov 2008 15:42:58 GMT Subject: [csw-buildfarm] Install CSWcswclassutils Message-ID: <20081123.15425800.2060930965@gyor.oxdrove.co.uk> Please can we install CSWcswclassutils. # pkg-get -i cswclassutils Build messages: Examining 'depend' file system CSWcommon common - common files and dirs for CSW packages ERROR: information for "CSWcswclassutils" was not found ERROR: Invalid package CSWcswclassutils specified. Check of ntp-4.2.4p5,REV=2008.11.22-SunOS5.8-i386-CSW.pkg fails ERROR: failed check. From jakegoerzen at gmail.com Sun Nov 23 20:17:40 2008 From: jakegoerzen at gmail.com (Jake Goerzen) Date: Sun, 23 Nov 2008 11:17:40 -0800 Subject: [csw-buildfarm] please install CSWboostrt CSWstlport Message-ID: <315c02ae0811231117r117ce5e0lede99b178c0d619a@mail.gmail.com> Hello, Please install CSWboostrt and CSWstlport packages on the buildfarm. These packages are needed to build current wesnoth packages. Thanks, Jake -------------- next part -------------- An HTML attachment was scrubbed... URL: From Murray.Jensen at csiro.au Sun Nov 23 23:25:18 2008 From: Murray.Jensen at csiro.au (Murray.Jensen at csiro.au) Date: Mon, 24 Nov 2008 09:25:18 +1100 Subject: [csw-buildfarm] please install CSWboostrt CSWstlport In-Reply-To: Your message of "Mon, 24 Nov 2008 06:17:40 +1100" <315c02ae0811231117r117ce5e0lede99b178c0d619a@mail.gmail.com> Message-ID: <19403.1227479118@gerd> On Mon, 24 Nov 2008 06:17:40 +1100, Jake Goerzen writes: >Hello, > > Please install CSWboostrt and CSWstlport packages on the buildfarm. These >packages are needed to build current wesnoth packages. > >Thanks, Jake PS: I have the latest version of boost ready ... it was in testing before the "split" and probably got lost (well maybe I didn't ever actually "submit" them). I will look at them again soon - when I get a chance. Cheers! Murray... From jgoerzen at opencsw.org Sun Nov 30 08:18:19 2008 From: jgoerzen at opencsw.org (Jake Goerzen) Date: Sat, 29 Nov 2008 23:18:19 -0800 Subject: [csw-buildfarm] request CSWgsed installed Message-ID: <315c02ae0811292318x2896ce1fs84ff319a9c9b23b7@mail.gmail.com> request CSWgsed installed on buildfarm Thanks, Jake -------------- next part -------------- An HTML attachment was scrubbed... URL: From pfelecan at opencsw.org Sun Nov 30 10:26:24 2008 From: pfelecan at opencsw.org (Peter FELECAN) Date: Sun, 30 Nov 2008 10:26:24 +0100 Subject: [csw-buildfarm] request for CSWtetex installation Message-ID: Please install CSWtetex on the build systems; this is needed for packages which generates documents from texinfo sources. E.g., new gcc3 packages build choke on its absence. -- Peter From dam at opencsw.org Sun Nov 30 20:05:07 2008 From: dam at opencsw.org (Dagobert Michelsen) Date: Sun, 30 Nov 2008 20:05:07 +0100 Subject: [csw-buildfarm] request CSWgsed installed In-Reply-To: <315c02ae0811292318x2896ce1fs84ff319a9c9b23b7@mail.gmail.com> References: <315c02ae0811292318x2896ce1fs84ff319a9c9b23b7@mail.gmail.com> Message-ID: <41EC8C11-F3E4-4122-B8E7-B86EE54F7EBC@opencsw.org> Hi Jake, Am 30.11.2008 um 08:18 schrieb Jake Goerzen: > request CSWgsed installed on buildfarm GNU sed is a prerequisite for GAR and was always installed on all machines. What did you try that you think it wasn't? Best regards -- Dago