From ihsan at opencsw.org Mon Aug 3 21:28:58 2009 From: ihsan at opencsw.org (Ihsan Dogan) Date: Mon, 03 Aug 2009 21:28:58 +0200 Subject: [csw-buildfarm] Perl modules on the buildfarm Message-ID: <4A773A7A.4090107@opencsw.org> Hello buildfarm admins, Please install the following Perl modules on the buildfarm: pm_netserver spamassassin pm_berkeleydb pm_converttnef pm_convertuulib pm_unixsyslog Thanks advance, Ihsan -- ihsan at dogan.ch http://blog.dogan.ch/ From dam at opencsw.org Mon Aug 3 22:11:40 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Mon, 3 Aug 2009 22:11:40 +0200 Subject: [csw-buildfarm] Perl modules on the buildfarm In-Reply-To: <4A773A7A.4090107@opencsw.org> References: <4A773A7A.4090107@opencsw.org> Message-ID: <160DDE56-748C-46B0-B66B-EBF656C204C4@opencsw.org> Hi, Am 03.08.2009 um 21:28 schrieb Ihsan Dogan: > Please install the following Perl modules on the buildfarm: > > pm_netserver > spamassassin > pm_berkeleydb > pm_converttnef > pm_convertuulib > pm_unixsyslog Doing this now. Best regards -- Dago From ihsan at opencsw.org Tue Aug 4 08:26:31 2009 From: ihsan at opencsw.org (Ihsan Dogan) Date: Tue, 04 Aug 2009 08:26:31 +0200 Subject: [csw-buildfarm] Perl modules on the buildfarm In-Reply-To: <160DDE56-748C-46B0-B66B-EBF656C204C4@opencsw.org> References: <4A773A7A.4090107@opencsw.org> <160DDE56-748C-46B0-B66B-EBF656C204C4@opencsw.org> Message-ID: <4A77D497.5060300@opencsw.org> On 03.08.2009 22:11, Dagobert Michelsen wrote: >> Please install the following Perl modules on the buildfarm: >> >> pm_netserver >> spamassassin >> pm_berkeleydb >> pm_converttnef >> pm_convertuulib >> pm_unixsyslog > > Doing this now. Thanks Dago. I just noticed, that I would need pm_mimetools as well. Would be great if you could install pm_mimetools as well. Ihsan -- ihsan at dogan.ch http://blog.dogan.ch/ From dam at opencsw.org Tue Aug 4 09:10:09 2009 From: dam at opencsw.org (dam at opencsw.org) Date: Tue, 4 Aug 2009 09:10:09 +0200 (CEST) Subject: [csw-buildfarm] Perl modules on the buildfarm In-Reply-To: <4A77D497.5060300@opencsw.org> References: <4A773A7A.4090107@opencsw.org> <160DDE56-748C-46B0-B66B-EBF656C204C4@opencsw.org> <4A77D497.5060300@opencsw.org> Message-ID: Hi Ihsan, > I just noticed, that I would need pm_mimetools as well. Would be great > if you could install pm_mimetools as well. Erledigt (done). Beste Gr??e -- Dago From william at wbonnet.net Tue Aug 4 10:06:09 2009 From: william at wbonnet.net (William Bonnet) Date: Tue, 04 Aug 2009 10:06:09 +0200 Subject: [csw-buildfarm] Is the farm down ? Message-ID: <4A77EBF1.9010202@wbonnet.net> Hi, I just tried to connect and got this message. tindalos:~ wbonnet$ ssh opencsw ssh: connect to host login.bo.opencsw.org port 22: Operation timed out If it is normal and has been anounced, please ignore my message ;) I am out and i don't have ccess to my emails :( cheers W. From ihsan at opencsw.org Tue Aug 4 10:13:53 2009 From: ihsan at opencsw.org (Ihsan Dogan) Date: Tue, 04 Aug 2009 10:13:53 +0200 Subject: [csw-buildfarm] Perl modules on the buildfarm In-Reply-To: References: <4A773A7A.4090107@opencsw.org> <160DDE56-748C-46B0-B66B-EBF656C204C4@opencsw.org> <4A77D497.5060300@opencsw.org> Message-ID: <4A77EDC1.2050008@opencsw.org> On 04.08.2009 09:10, dam at opencsw.org wrote: >> I just noticed, that I would need pm_mimetools as well. Would be great >> if you could install pm_mimetools as well. > > Erledigt (done). Danke. Ihsan -- ihsan at dogan.ch http://blog.dogan.ch/ From dam at opencsw.org Tue Aug 4 13:51:52 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Tue, 4 Aug 2009 13:51:52 +0200 Subject: [csw-buildfarm] Is the farm down ? In-Reply-To: <4A77EBF1.9010202@wbonnet.net> References: <4A77EBF1.9010202@wbonnet.net> Message-ID: Hi William, Am 04.08.2009 um 10:06 schrieb William Bonnet: > I just tried to connect and got this message. > > tindalos:~ wbonnet$ ssh opencsw > ssh: connect to host login.bo.opencsw.org port 22: Operation timed out > > If it is normal and has been anounced, please ignore my message ;) I > am out and i don't have ccess to my emails :( It does work from a customer site where I am right now. Maybe your network connectivity is flawed? Please also try login.opencsw.org if it is an DNS glitch. Best regards -- Dago From william at wbonnet.net Tue Aug 4 14:34:01 2009 From: william at wbonnet.net (William Bonnet) Date: Tue, 04 Aug 2009 14:34:01 +0200 Subject: [csw-buildfarm] Is the farm down ? In-Reply-To: References: <4A77EBF1.9010202@wbonnet.net> Message-ID: <4A782AB9.5090803@wbonnet.net> Hi > It does work from a customer site where I am right now. Maybe your > network connectivity is flawed? It seems the problem was somewhere on my side. I was able to ssh to another machine outside of the office, then to opencsw. Now i can access the farm from all location. Thanks cheers W. From william at wbonnet.net Tue Aug 4 16:35:29 2009 From: william at wbonnet.net (William Bonnet) Date: Tue, 04 Aug 2009 16:35:29 +0200 Subject: [csw-buildfarm] Broken Qt includes Message-ID: <4A784731.8080607@wbonnet.net> Hi, Please would it be possible to remove the following file from build9s ? These are includes provided by Qt package that should not be here... It is making FF3 compilation fail on this box. [wbonnet at build9s:~/mgar/pkg/firefox/branches/firefox3-packaging]$ grep "provided by Netscape" /opt/csw/include/* /opt/csw/include/jri.h:#error "/home/espenr/tmp/qt-3-espenr-26122/qt/extensions/nsplugin/src/jri.h must be provided by Netscape" /opt/csw/include/jri_md.h:#error "/home/espenr/tmp/qt-3-espenr-26122/qt/extensions/nsplugin/src/jri_md.h must be provided by Netscape" /opt/csw/include/jritypes.h:#error "/home/espenr/tmp/qt-3-espenr-26122/qt/extensions/nsplugin/src/jritypes.h must be provided by Netscape" /opt/csw/include/npapi.h:#error "/home/espenr/tmp/qt-3-espenr-26122/qt/extensions/nsplugin/src/npapi.h must be provided by Netscape" /opt/csw/include/npupp.h:#error "/home/espenr/tmp/qt-3-espenr-26122/qt/extensions/nsplugin/src/npupp.h must be provided by Netscape" Thanks in advance cheers W. From bwalton at opencsw.org Tue Aug 4 17:13:29 2009 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 04 Aug 2009 11:13:29 -0400 Subject: [csw-buildfarm] Broken Qt includes In-Reply-To: <4A784731.8080607@wbonnet.net> References: <4A784731.8080607@wbonnet.net> Message-ID: <1249398772-sup-7000@ntdws12.chass.utoronto.ca> Excerpts from William Bonnet's message of Tue Aug 04 10:35:29 -0400 2009: For the records: %B%n%b@%m%B :%d%b > ls -l jri.h jri_md.h jritypes.h npapi.h npupp.h -rw-r--r-- 1 root bin 223 Sep 13 2004 jri.h -rw-r--r-- 1 root bin 226 Sep 13 2004 jri_md.h -rw-r--r-- 1 root bin 228 Sep 13 2004 jritypes.h -rw-r--r-- 1 root bin 225 Sep 13 2004 npapi.h -rw-r--r-- 1 root bin 225 Sep 13 2004 npupp.h ls -l jri.h* jri_md.h* jritypes.h* npapi.h* npupp.h* -rw-r--r-- 1 root bin 223 Sep 13 2004 jri.h.20090804bw -rw-r--r-- 1 root bin 226 Sep 13 2004 jri_md.h.20090804bw -rw-r--r-- 1 root bin 228 Sep 13 2004 jritypes.h.20090804bw -rw-r--r-- 1 root bin 225 Sep 13 2004 npapi.h.20090804bw -rw-r--r-- 1 root bin 225 Sep 13 2004 npupp.h.20090804bw %B%n%b@%m%B :%d%b > -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From william at wbonnet.net Tue Aug 4 17:17:33 2009 From: william at wbonnet.net (William Bonnet) Date: Tue, 04 Aug 2009 17:17:33 +0200 Subject: [csw-buildfarm] Broken Qt includes In-Reply-To: <1249398772-sup-7000@ntdws12.chass.utoronto.ca> References: <4A784731.8080607@wbonnet.net> <1249398772-sup-7000@ntdws12.chass.utoronto.ca> Message-ID: <4A78510D.90906@wbonnet.net> Thanks :) It works. Ben Walton a ?crit : > Excerpts from William Bonnet's message of Tue Aug 04 10:35:29 -0400 2009: > > For the records: > > %B%n%b@%m%B :%d%b > ls -l jri.h jri_md.h jritypes.h npapi.h npupp.h > -rw-r--r-- 1 root bin 223 Sep 13 2004 jri.h > -rw-r--r-- 1 root bin 226 Sep 13 2004 jri_md.h > -rw-r--r-- 1 root bin 228 Sep 13 2004 jritypes.h > -rw-r--r-- 1 root bin 225 Sep 13 2004 npapi.h > -rw-r--r-- 1 root bin 225 Sep 13 2004 npupp.h > done > %B%n%b@%m%B :%d%b > ls -l jri.h* jri_md.h* jritypes.h* npapi.h* > npupp.h* > -rw-r--r-- 1 root bin 223 Sep 13 2004 jri.h.20090804bw > -rw-r--r-- 1 root bin 226 Sep 13 2004 jri_md.h.20090804bw > -rw-r--r-- 1 root bin 228 Sep 13 2004 jritypes.h.20090804bw > -rw-r--r-- 1 root bin 225 Sep 13 2004 npapi.h.20090804bw > -rw-r--r-- 1 root bin 225 Sep 13 2004 npupp.h.20090804bw > %B%n%b@%m%B :%d%b > > > -Ben > > ------------------------------------------------------------------------ > > _______________________________________________ > buildfarm mailing list > buildfarm at lists.opencsw.org > https://lists.opencsw.org/mailman/listinfo/buildfarm From rupert at opencsw.org Tue Aug 4 11:58:51 2009 From: rupert at opencsw.org (rupert THURNER) Date: Tue, 4 Aug 2009 11:58:51 +0200 Subject: [csw-buildfarm] [csw-maintainers] trac: Invalid package CSWpysvn specified. In-Reply-To: <9D7F5B60-F866-4050-A625-8FE9E23D94C8@opencsw.org> References: <6af4270908030857w2c05b623g65f9f00f472e30f8@mail.gmail.com> <6af4270908031513n5845b204y2a52fedd8d05f1cc@mail.gmail.com> <9D7F5B60-F866-4050-A625-8FE9E23D94C8@opencsw.org> Message-ID: <6af4270908040258q697338bev592a682d182213fb@mail.gmail.com> On Tue, Aug 4, 2009 at 08:59, Dagobert Michelsen wrote: > Hi Rupert, > > Am 04.08.2009 um 00:13 schrieb rupert THURNER: >> >> could you also install libevent from /home/testing on the buildfarm >> please? i try to upgrade memcached to use it for reviewboard. > > The usual policy is to first release packages before installing on the farm, > but an exception here may be valid as there are no further dependencies > to libevent and prior release would break installations. > > BUT: The library installs to /usr/local. This is of course not acceptable > :-) > Please fix the location and I'll install it. Please mail to buildfarm@ > next time because I tend to sleep once in a while ;-) done - and it is not *that* urgent :) what i am wondering where the "2.1.3" numbers at the end of the lib come from: 1 s none /opt/csw/lib/libevent-1.4.so.2=libevent-1.4.so.2.1.3 1 f none /opt/csw/lib/libevent-1.4.so.2.1.3 0755 root bin 137908 50125 1249378885 1 s none /opt/csw/lib/libevent.so=libevent-1.4.so.2.1.3 which seems to be correct, as other distributions packages look the same, see http://rpm.pbone.net/index.php3/stat/4/idpl/12592410/com/libevent-1.4.11-1.i586.rpm.html rupert From bwalton at artsci.utoronto.ca Tue Aug 4 17:08:05 2009 From: bwalton at artsci.utoronto.ca (Ben Walton) Date: Tue, 04 Aug 2009 11:08:05 -0400 Subject: [csw-buildfarm] Broken Qt includes In-Reply-To: <4A784731.8080607@wbonnet.net> References: <4A784731.8080607@wbonnet.net> Message-ID: <1249398404-sup-4143@ntdws12.chass.utoronto.ca> Excerpts from William Bonnet's message of Tue Aug 04 10:35:29 -0400 2009: > Please would it be possible to remove the following file from build9s ? > These are includes provided by Qt package that should not be here... It > is making FF3 compilation fail on this box. Doing this now.. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. From pfelecan at opencsw.org Wed Aug 5 09:14:35 2009 From: pfelecan at opencsw.org (Peter FELECAN) Date: Wed, 05 Aug 2009 09:14:35 +0200 Subject: [csw-buildfarm] request to install libotf_devel Message-ID: Please install on the build stack the following packages: libotf libotf_devel TIA -- Peter From dam at opencsw.org Wed Aug 5 11:48:01 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Wed, 5 Aug 2009 11:48:01 +0200 Subject: [csw-buildfarm] request to install libotf_devel In-Reply-To: References: Message-ID: <7FB07176-1D4A-4631-841D-623959B9F273@opencsw.org> Hi Phil, Am 05.08.2009 um 09:14 schrieb Peter FELECAN: > Please install on the build stack the following packages: > > libotf > libotf_devel This package is listed in the package listing at but there is an error opening the page, it is not in the catalog and there is no package released. Could you please have a look? Best regards -- Dago From pfelecan at opencsw.org Thu Aug 6 08:46:15 2009 From: pfelecan at opencsw.org (Peter FELECAN) Date: Thu, 06 Aug 2009 08:46:15 +0200 Subject: [csw-buildfarm] request to install libotf_devel In-Reply-To: <7FB07176-1D4A-4631-841D-623959B9F273@opencsw.org> (Dagobert Michelsen's message of "Wed\, 5 Aug 2009 11\:48\:01 +0200") References: <7FB07176-1D4A-4631-841D-623959B9F273@opencsw.org> Message-ID: Dagobert Michelsen writes: > Hi Phil, > > Am 05.08.2009 um 09:14 schrieb Peter FELECAN: >> Please install on the build stack the following packages: >> >> libotf >> libotf_devel > > This package is listed in the package listing at > > but there is an error opening the page, it is not in the catalog and > there is no package released. Could you please have a look? What's the status of this issue? -- Peter From skayser at opencsw.org Thu Aug 6 19:45:04 2009 From: skayser at opencsw.org (Sebastian Kayser) Date: Thu, 6 Aug 2009 19:45:04 +0200 (CEST) Subject: [csw-buildfarm] Err: cannot find maintainer for XYZ in mantis. (was: Re: request to install libotf_devel) In-Reply-To: References: <7FB07176-1D4A-4631-841D-623959B9F273@opencsw.org> Message-ID: <60121.194.246.122.22.1249580704.squirrel@ssl.skayser.de> Peter FELECAN wrote: > Dagobert Michelsen writes: > >> Am 05.08.2009 um 09:14 schrieb Peter FELECAN: >>> Please install on the build stack the following packages: >>> >>> libotf >>> libotf_devel >> >> This package is listed in the package listing at >> >> but there is an error opening the page, it is not in the catalog and >> there is no package released. Could you please have a look? > > What's the status of this issue? I am too seeing this for another package: ap2_modmacro. Listed on the packages page [1], not in the catalog [2], and error "Err: cannot find maintainer for ap2_modmacro in mantis." when opening the package page [3]. Phil, is this something we can get fixed for future package releases? I have seen this a couple of times before (but then with the the package being listed in the news feed on the front page, which it isn't the case for ap2_modmacro right now). Sebastian [1] http://opencsw.org/packages [2] wget -qO- http://www.ibiblio.org/pub/packages/solaris/opencsw/current/i386/5.10/catalog | grep ap2_modmacro [3] http://opencsw.org/packages/ap2_modmacro From dam at opencsw.org Thu Aug 6 21:33:09 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Thu, 6 Aug 2009 21:33:09 +0200 Subject: [csw-buildfarm] request to install libotf_devel In-Reply-To: References: <7FB07176-1D4A-4631-841D-623959B9F273@opencsw.org> Message-ID: <656BC459-35E0-4077-8E8E-4AD7EF2EE91C@opencsw.org> Hi Peter, Am 06.08.2009 um 08:46 schrieb Peter FELECAN: > Dagobert Michelsen writes: >> Am 05.08.2009 um 09:14 schrieb Peter FELECAN: >>> Please install on the build stack the following packages: >>> >>> libotf >>> libotf_devel >> >> This package is listed in the package listing at >> >> but there is an error opening the page, it is not in the catalog and >> there is no package released. Could you please have a look? > > What's the status of this issue? The packages have synced now and they are installed on the farm at this very moment. Best regards -- Dago From dam at opencsw.org Fri Aug 7 11:47:46 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Fri, 7 Aug 2009 11:47:46 +0200 Subject: [csw-buildfarm] All farm servers will be updated now Message-ID: Hi, I will be updating all farm servers to current right now. Please stand by. Best regards -- Dago From dam at opencsw.org Fri Aug 7 13:03:47 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Fri, 7 Aug 2009 13:03:47 +0200 Subject: [csw-buildfarm] [csw-maintainers] All farm servers will be updated now In-Reply-To: References: Message-ID: <36DF263B-F805-4A3C-861A-6C675C0B61B3@opencsw.org> Hi, Am 07.08.2009 um 11:47 schrieb Dagobert Michelsen: > I will be updating all farm servers to current right now. Please > stand by. The update is finished. Sorry for the inconvenience -- Dago From dam at opencsw.org Fri Aug 7 21:53:27 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Fri, 7 Aug 2009 21:53:27 +0200 Subject: [csw-buildfarm] Updating all servers to current/ again Message-ID: <6791BE28-C482-4A8E-A351-6DE7F8E35C1F@opencsw.org> Fellow maintainers, due to a massive package update I will update the buildfarm servers to current/ again now. Please stand by. Best regards -- Dago From skayser at opencsw.org Sat Aug 8 03:17:19 2009 From: skayser at opencsw.org (Sebastian Kayser) Date: Sat, 08 Aug 2009 03:17:19 +0200 Subject: [csw-buildfarm] Can CSWpmmodloadcond please be installed on the buildfarm. Thanks (eom) Message-ID: <4A7CD21F.4080801@opencsw.org> Sebastian From bwalton at opencsw.org Sat Aug 8 04:06:15 2009 From: bwalton at opencsw.org (Ben Walton) Date: Fri, 07 Aug 2009 22:06:15 -0400 Subject: [csw-buildfarm] Can CSWpmmodloadcond please be installed on the buildfarm. Thanks (eom) In-Reply-To: <4A7CD21F.4080801@opencsw.org> References: <4A7CD21F.4080801@opencsw.org> Message-ID: <1249697102-sup-2165@ntdws12.chass.utoronto.ca> Doing this now. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. From skayser at opencsw.org Sat Aug 8 04:32:59 2009 From: skayser at opencsw.org (Sebastian Kayser) Date: Sat, 08 Aug 2009 04:32:59 +0200 Subject: [csw-buildfarm] Could you please also install CSWpmlogmessage / CSWpmlogmsgsimple on the buildfarm. (eom) Message-ID: <4A7CE3DB.6020208@opencsw.org> Thanks, Sebastian From skayser at opencsw.org Sat Aug 8 09:13:22 2009 From: skayser at opencsw.org (Sebastian Kayser) Date: Sat, 08 Aug 2009 09:13:22 +0200 Subject: [csw-buildfarm] Could you please also install CSWpmlogmessage / CSWpmlogmsgsimple on the buildfarm. In-Reply-To: <4A7CE3DB.6020208@opencsw.org> References: <4A7CE3DB.6020208@opencsw.org> Message-ID: <4A7D2592.4060401@opencsw.org> Subject should have said CSWpmlogmessage _and_ CSWpmlogmsgsimple. :) Sebastian From bwalton at opencsw.org Sat Aug 8 22:31:54 2009 From: bwalton at opencsw.org (Ben Walton) Date: Sat, 08 Aug 2009 16:31:54 -0400 Subject: [csw-buildfarm] Could you please also install CSWpmlogmessage / CSWpmlogmsgsimple on the buildfarm. In-Reply-To: <4A7D2592.4060401@opencsw.org> References: <4A7CE3DB.6020208@opencsw.org> <4A7D2592.4060401@opencsw.org> Message-ID: <1249763487-sup-2904@ntdws12.chass.utoronto.ca> Excerpts from Sebastian Kayser's message of Sat Aug 08 03:13:22 -0400 2009: > Subject should have said CSWpmlogmessage _and_ CSWpmlogmsgsimple. :) Doing these now. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. From bwalton at opencsw.org Sun Aug 16 03:13:57 2009 From: bwalton at opencsw.org (Ben Walton) Date: Sat, 15 Aug 2009 21:13:57 -0400 Subject: [csw-buildfarm] testing libxslt Message-ID: <1250385180-sup-9800@ntdws12.chass.utoronto.ca> I'm installing a test packages for libxslt on build8xt to see if a patch I've created stops a segfault I've run into. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From bwalton at opencsw.org Sun Aug 16 03:38:36 2009 From: bwalton at opencsw.org (Ben Walton) Date: Sat, 15 Aug 2009 21:38:36 -0400 Subject: [csw-buildfarm] testing libxslt In-Reply-To: <1250385180-sup-9800@ntdws12.chass.utoronto.ca> References: <1250385180-sup-9800@ntdws12.chass.utoronto.ca> Message-ID: <1250386693-sup-3403@ntdws12.chass.utoronto.ca> Excerpts from Ben Walton's message of Sat Aug 15 21:13:57 -0400 2009: > I'm installing a test packages for libxslt on build8xt to see if a > patch I've created stops a segfault I've run into. Tested (worked) and now reverted. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From dam at opencsw.org Sun Aug 16 22:04:57 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Sun, 16 Aug 2009 22:04:57 +0200 Subject: [csw-buildfarm] [csw-maintainers] Solaris package, was Re: Mercurial 1.3 released! In-Reply-To: <6af4270908150317s51d92bc4r8463ca05cdb5e1ed@mail.gmail.com> References: <1246487895.21295.450.camel@calx> <55b02916-16ec-478b-a650-446994bef399@o6g2000yqj.googlegroups.com> <4A508D25.8040308@kiilerich.com> <9c79bcfc-dca6-41d0-bda9-b0b6fc058333@k6g2000yqn.googlegroups.com> <4A6ADF59.5000008@kiilerich.com> <87tz0vut64.fsf@hbox.dyndns.org> <5bdebc5a-0fb8-441c-b90c-bd75d7503646@h21g2000yqa.googlegroups.com> <4A80A3FA.5040808@kiilerich.com> <6af4270908150257q15ed26c3xa48522d1aa8fc1c@mail.gmail.com> <6af4270908150317s51d92bc4r8463ca05cdb5e1ed@mail.gmail.com> Message-ID: <96079CC6-E6E6-433A-B286-97113A1970ED@opencsw.org> Hi Rupert, Am 15.08.2009 um 12:17 schrieb rupert THURNER: > is there any way we could give mads access to our build servers to > have a look on the mercurial test case failures? Sure. Mads: Please mail me your intended user name ("mads"?) and your ssh public key so I can set up your account. Best regards -- Dago > > rupert. > >> On Tue, Aug 11, 2009 at 00:49, Mads Kiilerich >> wrote: >>> >>> rupert.thurner wrote, On 08/02/2009 03:25 PM: >>>> >>>> 0. solaris8, sparc, mercurial-1.3 (old test): >>>> http://pastebin.com/m32e3576f >>>> 1. solaris8, sparc, mercurial-1.3.1: >>>> http://mercurial.pastebin.com/m47cfc5f9 >>>> 2. solaris8, sparc, crew, parallel: http://pastebin.com/m5f53866c >>>> 3. solaris8, sparc, crew: http://mercurial.pastebin.com/m9b2365d >>>> 4. solaris10, i386, crew, parallel: >>>> http://mercurial.pastebin.com/mdcf6ef7 >>>> 5. solaris10, sparc, crew: http://mercurial.pastebin.com/m277a964e >>>> 6. solaris10, sparc, crew, parallel: http://pastebin.com/m4e3a4ede >>>> 7. solaris10, sparc, crew, parallel: >>>> http://mercurial.pastebin.com/m14098f50 >>>> >>> >>> I am no (hard)core Mercurial developer, but if you can give me >>> access to a >>> solaris account I can try to take a look. That might be the >>> easiest way to >>> make progress. >>> >>> /Mads >>> >> > _______________________________________________ > maintainers mailing list > maintainers at lists.opencsw.org > https://lists.opencsw.org/mailman/listinfo/maintainers From dam at opencsw.org Mon Aug 17 10:11:13 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Mon, 17 Aug 2009 10:11:13 +0200 Subject: [csw-buildfarm] [csw-maintainers] Solaris package, was Re: Mercurial 1.3 released! In-Reply-To: <4A886BB2.8050004@kiilerich.com> References: <1246487895.21295.450.camel@calx> <55b02916-16ec-478b-a650-446994bef399@o6g2000yqj.googlegroups.com> <4A508D25.8040308@kiilerich.com> <9c79bcfc-dca6-41d0-bda9-b0b6fc058333@k6g2000yqn.googlegroups.com> <4A6ADF59.5000008@kiilerich.com> <87tz0vut64.fsf@hbox.dyndns.org> <5bdebc5a-0fb8-441c-b90c-bd75d7503646@h21g2000yqa.googlegroups.com> <4A80A3FA.5040808@kiilerich.com> <6af4270908150257q15ed26c3xa48522d1aa8fc1c@mail.gmail.com> <6af4270908150317s51d92bc4r8463ca05cdb5e1ed@mail.gmail.com> <96079CC6-E6E6-433A-B286-97113A1970ED@opencsw.org> <4A886BB2.8050004@kiilerich.com> Message-ID: Hi Mads, Am 16.08.2009 um 22:27 schrieb Mads Kiilerich: > Dagobert Michelsen wrote, On 08/16/2009 10:04 PM: >> Am 15.08.2009 um 12:17 schrieb rupert THURNER: >>> is there any way we could give mads access to our build servers to >>> have a look on the mercurial test case failures? >> >> Sure. >> >> Mads: Please mail me your intended user name ("mads"?) and your ssh >> public >> key so I can set up your account. > > The username doesn't matter - it is only for temporary use. You should be able to log in now with ssh mads at login.opencsw.org Rupert will provide you with the information needed to reproduce the issue. @buildfarm-maintainers: The uid range 11000-11999 has been reserved for non-maintainers who need access to a sparc platform. It is not intended to be shared across buildfarms and managed individually by each farm admin. Current foreign users are Tobias Oetiker (RRDTool) and Simon Josefsson (GNU TLS). Best regards -- Dago From pfelecan at opencsw.org Tue Aug 18 10:14:12 2009 From: pfelecan at opencsw.org (Peter FELECAN) Date: Tue, 18 Aug 2009 10:14:12 +0200 Subject: [csw-buildfarm] installation request for libm17n_devel and m17ndb Message-ID: Please install on the build stack the following packages: libm17n libm17n_devel m17ndb TIA -- Peter From dam at opencsw.org Tue Aug 18 10:26:52 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Tue, 18 Aug 2009 10:26:52 +0200 Subject: [csw-buildfarm] installation request for libm17n_devel and m17ndb In-Reply-To: References: Message-ID: <765738AB-60C3-4EC2-949B-5BE29BF55297@opencsw.org> Hi Peter, Am 18.08.2009 um 10:14 schrieb Peter FELECAN: > Please install on the build stack the following packages: > > libm17n > libm17n_devel > m17ndb Installing right now. Best regards -- Dago From dam at opencsw.org Tue Aug 18 10:37:07 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Tue, 18 Aug 2009 10:37:07 +0200 Subject: [csw-buildfarm] Buildfarm general update Message-ID: <6F238B95-6FBE-468F-A864-EACF55305003@opencsw.org> Hi, I am currently updating the farm again to current/, please stand by. Best regards -- Dago From dam at opencsw.org Tue Aug 18 14:13:16 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Tue, 18 Aug 2009 14:13:16 +0200 Subject: [csw-buildfarm] [csw-maintainers] Buildfarm general update In-Reply-To: References: <6F238B95-6FBE-468F-A864-EACF55305003@opencsw.org> Message-ID: Hi Maciej, Am 18.08.2009 um 11:52 schrieb Maciej (Matchek) Blizinski: > On Tue, Aug 18, 2009 at 9:37 AM, Dagobert Michelsen > wrote: >> I am currently updating the farm again to current/, please stand by. > > Could you install CSWrake there? I have a package to build which > requires it. Sure, the package is installing right now. Please mail to buildfarm at lists.opencsw.org next time as I am not as available as the buildfarm group :-) Best regards -- Dago From maciej at opencsw.org Tue Aug 18 17:06:33 2009 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Tue, 18 Aug 2009 16:06:33 +0100 Subject: [csw-buildfarm] [csw-maintainers] Buildfarm general update In-Reply-To: References: <6F238B95-6FBE-468F-A864-EACF55305003@opencsw.org> Message-ID: On Tue, Aug 18, 2009 at 1:13 PM, Dagobert Michelsen wrote: > Sure, the package is installing right now. Please mail to > ?buildfarm at lists.opencsw.org > next time as I am not as available as the buildfarm group :-) I don't think I can post to this group. Should I subscribe? Maciej From pfelecan at opencsw.org Tue Aug 18 18:40:09 2009 From: pfelecan at opencsw.org (Peter FELECAN) Date: Tue, 18 Aug 2009 18:40:09 +0200 Subject: [csw-buildfarm] request for installation of gtk2_devel Message-ID: Please install the gtk2_devel package. BTW, I'm quite astonished that it's not installed on the farm as I already used it for some other packages. TIA -- Peter From bwalton at opencsw.org Tue Aug 18 18:47:22 2009 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 18 Aug 2009 12:47:22 -0400 Subject: [csw-buildfarm] request for installation of gtk2_devel In-Reply-To: References: Message-ID: <1250614030-sup-9552@ntdws12.chass.utoronto.ca> Excerpts from Peter FELECAN's message of Tue Aug 18 12:40:09 -0400 2009: > Please install the gtk2_devel package. BTW, I'm quite astonished that > it's not installed on the farm as I already used it for some other > packages. Doing this now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From dam at opencsw.org Tue Aug 18 22:21:20 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Tue, 18 Aug 2009 22:21:20 +0200 Subject: [csw-buildfarm] Updating the farm again to current/ Message-ID: <28B7802C-F943-4E66-8A74-5CDF2F077ED7@opencsw.org> Hi, due to the high update frequence of packages released I will update the farm again to current now. Best regards -- Dago From maciej at opencsw.org Wed Aug 19 13:42:06 2009 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Wed, 19 Aug 2009 12:42:06 +0100 Subject: [csw-buildfarm] [csw-maintainers] Buildfarm general update In-Reply-To: References: <6F238B95-6FBE-468F-A864-EACF55305003@opencsw.org> Message-ID: On Tue, Aug 18, 2009 at 10:52 AM, Maciej (Matchek) Blizinski wrote: > On Tue, Aug 18, 2009 at 9:37 AM, Dagobert Michelsen wrote: >> Hi, >> >> I am currently updating the farm again to current/, please stand by. > > Could you install CSWrake there? I have a package to build which requires it. A request for two more packages: CSWzope and CSWtwisted (required for build{ing,bot}). Maciej From dam at opencsw.org Wed Aug 19 13:47:46 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Wed, 19 Aug 2009 13:47:46 +0200 Subject: [csw-buildfarm] [csw-maintainers] Buildfarm general update In-Reply-To: References: <6F238B95-6FBE-468F-A864-EACF55305003@opencsw.org> Message-ID: Hi Maciej, Am 19.08.2009 um 13:42 schrieb Maciej (Matchek) Blizinski: > On Tue, Aug 18, 2009 at 10:52 AM, Maciej (Matchek) > Blizinski wrote: >> On Tue, Aug 18, 2009 at 9:37 AM, Dagobert >> Michelsen wrote: >>> Hi, >>> >>> I am currently updating the farm again to current/, please stand by. >> >> Could you install CSWrake there? I have a package to build which >> requires it. > > A request for two more packages: CSWzope and CSWtwisted (required for > build{ing,bot}). Doing this now. Best regards -- Dago From ja at opencsw.org Thu Aug 20 05:33:34 2009 From: ja at opencsw.org (Juergen Arndt) Date: Thu, 20 Aug 2009 05:33:34 +0200 Subject: [csw-buildfarm] Please install pm_htmltemplate Message-ID: Hi all, please install pm_htmltemplate - CSWpmhtmltmpl - on the buildfarm. Thank you, Juergen -- Juergen Arndt From bwalton at opencsw.org Thu Aug 20 15:03:32 2009 From: bwalton at opencsw.org (Ben Walton) Date: Thu, 20 Aug 2009 09:03:32 -0400 Subject: [csw-buildfarm] Please install pm_htmltemplate In-Reply-To: References: Message-ID: <1250773396-sup-1634@ntdws12.chass.utoronto.ca> Excerpts from Juergen Arndt's message of Wed Aug 19 23:33:34 -0400 2009: > please install pm_htmltemplate - CSWpmhtmltmpl - on the buildfarm. Doing this now. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From skayser at opencsw.org Sat Aug 22 00:48:27 2009 From: skayser at opencsw.org (Sebastian Kayser) Date: Sat, 22 Aug 2009 00:48:27 +0200 Subject: [csw-buildfarm] Can pm_netnis please be installed on the buildfarm (eom) Message-ID: <4A8F243B.60002@opencsw.org> Thanks Sebastian From bwalton at opencsw.org Sat Aug 22 02:19:56 2009 From: bwalton at opencsw.org (Ben Walton) Date: Fri, 21 Aug 2009 20:19:56 -0400 Subject: [csw-buildfarm] Can pm_netnis please be installed on the buildfarm (eom) In-Reply-To: <4A8F243B.60002@opencsw.org> References: <4A8F243B.60002@opencsw.org> Message-ID: <1250900377-sup-1612@ntdws12.chass.utoronto.ca> Doing this now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From skayser at opencsw.org Sat Aug 22 19:19:47 2009 From: skayser at opencsw.org (Sebastian Kayser) Date: Sat, 22 Aug 2009 19:19:47 +0200 Subject: [csw-buildfarm] Can ap2_modperl please be installed on the buildfarm .Thanks. (eom) Message-ID: <4A9028B3.7050708@opencsw.org> From dam at opencsw.org Sun Aug 23 10:01:30 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Sun, 23 Aug 2009 10:01:30 +0200 Subject: [csw-buildfarm] Can ap2_modperl please be installed on the buildfarm .Thanks. (eom) In-Reply-To: <4A9028B3.7050708@opencsw.org> References: <4A9028B3.7050708@opencsw.org> Message-ID: Hi Sebastian, Am 22.08.2009 um 19:19 schrieb Sebastian Kayser: > Can ap2_modperl please be installed on the buildfarm Doing this now. Best regards -- Dago From skayser at opencsw.org Mon Aug 24 00:10:44 2009 From: skayser at opencsw.org (Sebastian Kayser) Date: Mon, 24 Aug 2009 00:10:44 +0200 Subject: [csw-buildfarm] Can pyxml please be installed on the buildfarm. Thanks once again (eom) Message-ID: <4A91BE64.2070300@opencsw.org> From bwalton at opencsw.org Mon Aug 24 01:44:59 2009 From: bwalton at opencsw.org (Ben Walton) Date: Sun, 23 Aug 2009 19:44:59 -0400 Subject: [csw-buildfarm] Can pyxml please be installed on the buildfarm. Thanks once again (eom) In-Reply-To: <4A91BE64.2070300@opencsw.org> References: <4A91BE64.2070300@opencsw.org> Message-ID: <1251071087-sup-5744@ntdws12.chass.utoronto.ca> Excerpts from Sebastian Kayser's message of Sun Aug 23 18:10:44 -0400 2009: Doing this now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From maciej at opencsw.org Mon Aug 24 18:32:22 2009 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Mon, 24 Aug 2009 17:32:22 +0100 Subject: [csw-buildfarm] Proxy not listening? Message-ID: I'm getting this error message at the moment: Connecting to proxy|192.168.1.6|:3128... failed: Connection refused. Maciej From dam at opencsw.org Tue Aug 25 12:53:00 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Tue, 25 Aug 2009 12:53:00 +0200 Subject: [csw-buildfarm] Proxy not listening? In-Reply-To: References: Message-ID: Hi Maciej, Am 24.08.2009 um 18:32 schrieb Maciej (Matchek) Blizinski: > I'm getting this error message at the moment: > > Connecting to proxy|192.168.1.6|:3128... failed: Connection refused. Looks like Ben already repaired it. This was due to the upgrade necessary in the webzone made by a colleague installing Munin. Best regards -- Dago From bwalton at opencsw.org Tue Aug 25 14:55:45 2009 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 25 Aug 2009 08:55:45 -0400 Subject: [csw-buildfarm] Proxy not listening? In-Reply-To: References: Message-ID: <1251204912-sup-2699@ntdws12.chass.utoronto.ca> Excerpts from Dagobert Michelsen's message of Tue Aug 25 06:53:00 -0400 2009: > Looks like Ben already repaired it. This was due to the upgrade > necessary in the webzone made by a colleague installing Munin. This was actually handled by |woody| (whose real name I don't know). -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From mads at kiilerich.com Sun Aug 16 22:27:30 2009 From: mads at kiilerich.com (Mads Kiilerich) Date: Sun, 16 Aug 2009 22:27:30 +0200 Subject: [csw-buildfarm] [csw-maintainers] Solaris package, was Re: Mercurial 1.3 released! In-Reply-To: <96079CC6-E6E6-433A-B286-97113A1970ED@opencsw.org> References: <1246487895.21295.450.camel@calx> <55b02916-16ec-478b-a650-446994bef399@o6g2000yqj.googlegroups.com> <4A508D25.8040308@kiilerich.com> <9c79bcfc-dca6-41d0-bda9-b0b6fc058333@k6g2000yqn.googlegroups.com> <4A6ADF59.5000008@kiilerich.com> <87tz0vut64.fsf@hbox.dyndns.org> <5bdebc5a-0fb8-441c-b90c-bd75d7503646@h21g2000yqa.googlegroups.com> <4A80A3FA.5040808@kiilerich.com> <6af4270908150257q15ed26c3xa48522d1aa8fc1c@mail.gmail.com> <6af4270908150317s51d92bc4r8463ca05cdb5e1ed@mail.gmail.com> <96079CC6-E6E6-433A-B286-97113A1970ED@opencsw.org> Message-ID: <4A886BB2.8050004@kiilerich.com> Dagobert Michelsen wrote, On 08/16/2009 10:04 PM: > Hi Rupert, > > Am 15.08.2009 um 12:17 schrieb rupert THURNER: >> is there any way we could give mads access to our build servers to >> have a look on the mercurial test case failures? > > Sure. > > Mads: Please mail me your intended user name ("mads"?) and your ssh > public > key so I can set up your account. > > > Best regards > > -- Dago ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA1EdE6GiiJgrTsC5VMoNCW6wuPO47Go42QJKQKsr3LEcYyCIA8D5Tc1jXoGuTKtruu97HXR87WK+q6+VFOY5VDbai6PH4/YaH5xEzlqbULrxnLXxKO56lUcw1R96EBX68U40fHgXhkKtxpeUGw6QSdzCS6aAGOA/nijVvTPsB8OXvPBO5b4gm0/zKcLG2iyGt/ZOkaqYUf2YQYMEW5ez+4Rjt/X9dO8+nu5FiDOPr/iE95WjU3YTzrDyad1phaCnBSL1PtdunNDhmguCE/ISMP55pVl1ioOQW2vrBez1hsnyNaVSjV3Ht+gUXCNaMezz8AqLYtZYVCv+1rpVwSEhU/Q== mk The username doesn't matter - it is only for temporary use. /Mads From bruno at clisp.org Tue Aug 25 09:49:05 2009 From: bruno at clisp.org (Bruno Haible) Date: Tue, 25 Aug 2009 09:49:05 +0200 Subject: [csw-buildfarm] buildfarm account Message-ID: <200908250949.06259.bruno@clisp.org> Hi, May I get a login account on the Solaris machines of the OpenCSW buildfarm? I'm the maintainer for the following GNU packages which are included in OpenCSW: - GNU libsigsegv (highly OS and CPU dependent code), - GNU libffcall (highly CPU and OS dependent code) - GNU gettext (includes unit tests which currently fail on Solaris/x86 inside QEMU for no good reason, needs investigation) Without stepping on the toes of the OpenCSW packagers, I would like to ensure that the above listed packages compile and pass all unit tests on Solaris machines. I can use a QEMU virtual machine of Solaris/x86 for most purposes, but cross-checking on real hardware is necessary at some points. Bruno -------------- next part -------------- ssh-dss 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 haible at honolulu.ilog.fr From dam at opencsw.org Wed Aug 26 22:27:57 2009 From: dam at opencsw.org (Dagobert Michelsen) Date: Wed, 26 Aug 2009 22:27:57 +0200 Subject: [csw-buildfarm] buildfarm account In-Reply-To: <200908250949.06259.bruno@clisp.org> References: <200908250949.06259.bruno@clisp.org> Message-ID: <879F578C-7B14-4144-B460-214D82D69B45@opencsw.org> Hi Bruno, Am 25.08.2009 um 09:49 schrieb Bruno Haible: > May I get a login account on the Solaris machines of the OpenCSW > buildfarm? Sure. > I'm the maintainer for the following GNU packages which are included > in > OpenCSW: > - GNU libsigsegv (highly OS and CPU dependent code), > - GNU libffcall (highly CPU and OS dependent code) > - GNU gettext (includes unit tests which currently fail on Solaris/ > x86 > inside QEMU for no good reason, needs investigation) Yes. And libiconv, where we already mailed a couple of times :-) > Without stepping on the toes of the OpenCSW packagers, I would like to > ensure that the above listed packages compile and pass all unit > tests on > Solaris machines. I can use a QEMU virtual machine of Solaris/x86 for > most purposes, but cross-checking on real hardware is necessary at > some > points. No problem, we have Solaris 8/9/10 Sparc/x86 available with Sun Studio 11/12/12u1 and all recent GCC compilers. Let me know if you need anything on the farm. You should be able to log in now with ssh haible at login.opencsw.org A short introduction is /etc/SETUP on 'login'. Best regards -- Dago From maciej at opencsw.org Fri Aug 28 00:03:01 2009 From: maciej at opencsw.org (Maciej (Matchek) Blizinski) Date: Thu, 27 Aug 2009 23:03:01 +0100 Subject: [csw-buildfarm] [csw-maintainers] Buildfarm general update In-Reply-To: References: <6F238B95-6FBE-468F-A864-EACF55305003@opencsw.org> Message-ID: A request for more packages on the buildfarm! libyaml (needed as a dependency for pyyaml) wgetpaste (so I can spam you more with my code snippets) Maciej From bwalton at opencsw.org Fri Aug 28 04:24:40 2009 From: bwalton at opencsw.org (Ben Walton) Date: Thu, 27 Aug 2009 22:24:40 -0400 Subject: [csw-buildfarm] [csw-maintainers] Buildfarm general update In-Reply-To: References: <6F238B95-6FBE-468F-A864-EACF55305003@opencsw.org> Message-ID: <1251426265-sup-7063@ntdws12.chass.utoronto.ca> Excerpts from Maciej (Matchek) Blizinski's message of Thu Aug 27 18:03:01 -0400 2009: > libyaml (needed as a dependency for pyyaml) > wgetpaste (so I can spam you more with my code snippets) Doing these now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 GPG Key Id: 8E89F6D2; Key Server: pgp.mit.edu Contact me to arrange for a CAcert assurance meeting. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From bruno at clisp.org Wed Aug 26 23:33:24 2009 From: bruno at clisp.org (Bruno Haible) Date: Wed, 26 Aug 2009 23:33:24 +0200 Subject: [csw-buildfarm] buildfarm account In-Reply-To: <879F578C-7B14-4144-B460-214D82D69B45@opencsw.org> References: <200908250949.06259.bruno@clisp.org> <879F578C-7B14-4144-B460-214D82D69B45@opencsw.org> Message-ID: <200908262333.25477.bruno@clisp.org> Hi Dagobert, Thank you for the account! > And libiconv, where we already mailed a couple of times :-) Yes :-) but libiconv has the least amount of portability problems. > ssh haible at login.opencsw.org > A short introduction is /etc/SETUP on 'login'. Works fine. Thank you! Bruno