From ihsan at opencsw.org Tue Apr 5 08:51:19 2011 From: ihsan at opencsw.org (=?UTF-8?B?xLBoc2FuIERvxJ9hbg==?=) Date: Tue, 05 Apr 2011 08:51:19 +0200 Subject: [csw-buildfarm] pm_netucptransactionmanager, pm_netucpcommon, pm_netucpinttimeout Message-ID: <4D9ABBE7.8020106@opencsw.org> Good morning, Could you please install these Perl modules on the buildfarm? - pm_netucptransactionmanager- - pm_netucpcommon ?- pm_netucpinttimeout Ihsan -- ihsan at dogan.ch http://blog.dogan.ch/ From bwalton at opencsw.org Tue Apr 5 15:37:31 2011 From: bwalton at opencsw.org (Ben Walton) Date: Tue, 05 Apr 2011 09:37:31 -0400 Subject: [csw-buildfarm] pm_netucptransactionmanager, pm_netucpcommon, pm_netucpinttimeout In-Reply-To: <4D9ABBE7.8020106@opencsw.org> References: <4D9ABBE7.8020106@opencsw.org> Message-ID: <1302010638-sup-8004@pinkfloyd.chass.utoronto.ca> Excerpts from ?hsan Do?an's message of Tue Apr 05 02:51:19 -0400 2011: > Could you please install these Perl modules on the buildfarm? > > - pm_netucptransactionmanager- > - pm_netucpcommon > ?- pm_netucpinttimeout Almost done. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From skayser at opencsw.org Thu Apr 7 23:59:06 2011 From: skayser at opencsw.org (Sebastian Kayser) Date: Thu, 7 Apr 2011 23:59:06 +0200 Subject: [csw-buildfarm] Please install ack on the login host. TIA! (eom) Message-ID: <20110407215906.GG24305@sebastiankayser.de> Sebastian From janeliasoul at ymail.com Fri Apr 8 17:11:00 2011 From: janeliasoul at ymail.com (Janelia) Date: Fri, 08 Apr 2011 11:11:00 -0400 Subject: [csw-buildfarm] =?utf-8?q?Hello_Friends_=26_Family?= Message-ID: n/a ---------------------------------------- Upcoming Shows/Events: Apr 08, 2011 - Washington, DC - Embassy of the Federal... - More info: http://fburls.com/69-rzPumk9X Full show/event calendar: http://fburls.com/17-ABtP4MwM ---------------------------------------- Janelia sent this email to buildfarm at opencsw.org Questions? Contact janeliasoul at ymail.com or Janelia, c/o FanBridge, Inc. - 14525 SW Millikan Way, #16910, Beaverton, Oregon 97005, United States Download the toolbar: http://Janelia.fanbridge.com/toolbar Update Your Information - http://fburls.com/updt/138428|hcY6kFbXaa461K32Uahchdh3Xd|buildfarm at opencsw.org|721945 Forward to a friend - http://fburls.com/fwrd/138428|hcY6kFbXaa461K32Uahchdh3Xd|156699119|721945 Unsubscribe - http://fburls.com/usub/138428|hcY6kFbXaa461K32Uahchdh3Xd|156699119|721945 Privacy Policy - http://www.fanbridge.com/learn/privacy.php This email message is powered by FanBridge: http://www.fanbridge.com/b.php?id=138428 Powering Valuable Fan Relationships -------------- next part -------------- An HTML attachment was scrubbed... URL: From dam at opencsw.org Sun Apr 10 21:03:14 2011 From: dam at opencsw.org (Dagobert Michelsen) Date: Sun, 10 Apr 2011 21:03:14 +0200 Subject: [csw-buildfarm] Please install ack on the login host. TIA! (eom) In-Reply-To: <20110407215906.GG24305@sebastiankayser.de> References: <20110407215906.GG24305@sebastiankayser.de> Message-ID: Hi Sebastian, Am 07.04.2011 um 23:59 schrieb Sebastian Kayser: > Please install ack on the login host. TIA! (eom) Done. Best regards -- Dago From skayser at opencsw.org Wed Apr 13 12:10:38 2011 From: skayser at opencsw.org (Sebastian Kayser) Date: Wed, 13 Apr 2011 12:10:38 +0200 Subject: [csw-buildfarm] Please install py_quixote on the buildfarm. Thanks! (eom) Message-ID: <20110413101038.GA17736@sebastiankayser.de> Sebastian From maciej at opencsw.org Wed Apr 13 13:01:59 2011 From: maciej at opencsw.org (=?UTF-8?Q?Maciej_Blizi=C5=84ski?=) Date: Wed, 13 Apr 2011 12:01:59 +0100 Subject: [csw-buildfarm] py_unittest2 on login Message-ID: Can you install py_unittest2 on login? From bwalton at opencsw.org Wed Apr 13 14:49:33 2011 From: bwalton at opencsw.org (Ben Walton) Date: Wed, 13 Apr 2011 08:49:33 -0400 Subject: [csw-buildfarm] py_unittest2 on login In-Reply-To: References: Message-ID: <1302698963-sup-658@pinkfloyd.chass.utoronto.ca> Excerpts from Maciej Blizi?ski's message of Wed Apr 13 07:01:59 -0400 2011: > Can you install py_unittest2 on login? Installing now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From bwalton at opencsw.org Wed Apr 13 14:53:37 2011 From: bwalton at opencsw.org (Ben Walton) Date: Wed, 13 Apr 2011 08:53:37 -0400 Subject: [csw-buildfarm] Please install py_quixote on the buildfarm. Thanks! (eom) In-Reply-To: <20110413101038.GA17736@sebastiankayser.de> References: <20110413101038.GA17736@sebastiankayser.de> Message-ID: <1302699209-sup-6116@pinkfloyd.chass.utoronto.ca> Excerpts from Sebastian Kayser's message of Wed Apr 13 06:10:38 -0400 2011: Installing now. -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From sebastian at skayser.de Mon Apr 18 21:35:59 2011 From: sebastian at skayser.de (Sebastian Kayser) Date: Mon, 18 Apr 2011 21:35:59 +0200 Subject: [csw-buildfarm] Please install py_mako on the build hosts. TIA! :) (eom) Message-ID: <20110418193559.GI17736@sebastiankayser.de> Sebastian From dam at opencsw.org Mon Apr 18 22:09:49 2011 From: dam at opencsw.org (Dagobert Michelsen) Date: Mon, 18 Apr 2011 22:09:49 +0200 Subject: [csw-buildfarm] Please install py_mako on the build hosts. TIA! :) (eom) In-Reply-To: <20110418193559.GI17736@sebastiankayser.de> References: <20110418193559.GI17736@sebastiankayser.de> Message-ID: <1EDFEB76-2CEB-44EC-AA74-3033F1A18C01@opencsw.org> Hi, Am 18.04.2011 um 21:35 schrieb Sebastian Kayser: > Please install py_mako on the build hosts Doing this now. Best regards -- Dago From sarosh.jamal at utoronto.ca Tue Apr 19 17:32:17 2011 From: sarosh.jamal at utoronto.ca (Sarosh Jamal) Date: Tue, 19 Apr 2011 11:32:17 -0400 Subject: [csw-buildfarm] FW: just about... Message-ID: Hello Dago, I'm new to the buildfarm community and was asked to send a request here about verifying whether certain packages should be installed on login. I was using skayser's mgar instructions and came across this output: sjamal at login [login]:~ > echo $PATH /usr/bin:/usr/sbin:/sbin:/opt/csw/bin:/usr/ccs/bin:/usr/dt/bin:/usr/openwin/bin:/opt/bop/bin:/usr/sfw/bin:/usr/sfw/sbin:/home/sjamal/bin sjamal at login [login]:~ > mgar init ~/opencsw/ ERROR: Prerequisite command "mknmz" not found in your $PATH. Please make sure that these required packages are installed: findutils ggrep gmake namazu subversion sjamal at login [login]:~ > Any help in setting up or feedback will be much appreciated! Thank you, Sarosh --- Sarosh Jamal Geocomputation Specialist Department of Geography http://geog.utm.utoronto.ca University of Toronto Mississauga http://www.utm.utoronto.ca E: sarosh.jamal at utoronto.ca P: 905.569.4497 -----Original Message----- From: Ben Walton [mailto:bwalton at cquest.utoronto.ca] On Behalf Of Ben Walton Sent: April 19, 2011 11:24 AM To: Sarosh Jamal Subject: RE: just about... Excerpts from Sarosh Jamal's message of Tue Apr 19 11:12:35 -0400 2011: Hi Sarosh, > I'm assuming these packages are installed on login, somewhere? What > am I doing wrong? Actually, the mknmz isn't setup on login. Try running this on current9x instead. Login is one box that I don't have admin rights on so I can't fix it immediately, but if you mail buildfarm at lists.opencsw.org with the request, Dago will either add it or indicate that it's not meant to be there. Thanks -Ben -- Ben Walton Systems Programmer - CHASS University of Toronto C:416.407.5610 | W:416.978.4302 From skayser at opencsw.org Tue Apr 19 17:23:05 2011 From: skayser at opencsw.org (Sebastian Kayser) Date: Tue, 19 Apr 2011 17:23:05 +0200 Subject: [csw-buildfarm] FW: just about... In-Reply-To: References: Message-ID: <20110419152305.GA30250@sebastiankayser.de> Hi Sarosh, * Sarosh Jamal wrote: > I'm new to the buildfarm community and was asked to send a request > here about verifying whether certain packages should be installed on > login. > > I was using skayser's mgar instructions ... wicked! Let me know in case you have any problems with mgar. Should become the default interface to GAR soon, thus, the more users and feedback the better. > and came across this output: > > sjamal at login [login]:~ > mgar init ~/opencsw/ ERROR: Prerequisite command "mknmz" not found in your $PATH. Please make sure that these required packages are installed: > > findutils ggrep gmake namazu subversion The login host only runs a restricted set of packages and isn't intended to be used for packaging (only logins and package submission). Simply invoke mgar on the build* hosts and you'll be fine. Sebastian From janeliasoul at ymail.com Thu Apr 28 17:13:41 2011 From: janeliasoul at ymail.com (Janelia) Date: Thu, 28 Apr 2011 11:13:41 -0400 Subject: [csw-buildfarm] =?utf-8?q?Hello_Friends_=26_Family?= Message-ID: <3e98c0441dff447236a3ce61b53c75f5@fanbridge.com> n/a ---------------------------------------- Upcoming Shows/Events: May 12, 2011 - Towson, MD - Recher Theater - More info: http://fburls.com/87-VO09FaIc Full show/event calendar: http://fburls.com/33-adteths6 ---------------------------------------- Janelia sent this email to buildfarm at opencsw.org Questions? Contact janeliasoul at ymail.com or Janelia, c/o FanBridge, Inc. - 14525 SW Millikan Way, #16910, Beaverton, Oregon 97005, United States Update Your Information - http://fburls.com/updt/138428|hcY6kFbXaa461K32Uahchdh3Xd|buildfarm at opencsw.org|727999 Forward to a friend - http://fburls.com/fwrd/138428|hcY6kFbXaa461K32Uahchdh3Xd|156699119|727999 Unsubscribe - http://fburls.com/usub/138428|hcY6kFbXaa461K32Uahchdh3Xd|156699119|727999 Privacy Policy - http://www.fanbridge.com/learn/privacy.php This email message is powered by FanBridge: http://www.fanbridge.com/b.php?id=138428 Powering Valuable Fan Relationships -------------- next part -------------- An HTML attachment was scrubbed... URL: From postmaster at koshi.ntc.net.np Sat Apr 30 08:10:01 2011 From: postmaster at koshi.ntc.net.np (Content-filter at koshi.ntc.net.np) Date: Sat, 30 Apr 2011 11:55:01 +0545 (NPT) Subject: [csw-buildfarm] BANNED contents from you (.dat,Message.pif) In-Reply-To: <20110430060930.980049E1D9C@koshi.ntc.net.np> Message-ID: BANNED CONTENTS ALERT Our content checker found banned name: .dat,Message.pif in email presumably from you to the following recipient: -> fosyb at ntc.net.np Our internal reference code for your message is 20253-20/qIfmoonOA5mT First upstream SMTP client IP address: [59.57.1.166] According to a 'Received:' trace, the message apparently originated at: [59.57.1.166], lists.opencsw.org unknown [59.57.1.166] Return-Path: From: buildfarm at lists.opencsw.org Message-ID: <20110430060930.980049E1D9C at koshi.ntc.net.np> Subject: Returned mail: see transcript for details Delivery of the email was stopped! The message has been blocked because it contains a component (as a MIME part or nested within) with declared name or MIME type or contents type violating our access policy. To transfer contents that may be considered risky or unwanted by site policies, or simply too large for mailing, please consider publishing your content on the web, and only sending an URL of the document to the recipient. Depending on the recipient and sender site policies, with a little effort it might still be possible to send any contents (including viruses) using one of the following methods: - encrypted using pgp, gpg or other encryption methods; - wrapped in a password-protected or scrambled container or archive (e.g.: zip -e, arj -g, arc g, rar -p, or other methods) Note that if the contents is not intended to be secret, the encryption key or password may be included in the same message for recipient's convenience. We are sorry for inconvenience if the contents was not malicious. The purpose of these restrictions is to cut the most common propagation methods used by viruses and other malware. These often exploit automatic mechanisms and security holes in more popular mail readers (Microsoft mail readers and browsers are a common target). By requiring an explicit and decisive action from the recipient to decode mail, the danger of automatic malware propagation is largely reduced. -------------- next part -------------- A non-text attachment was scrubbed... Name: header Type: text/rfc822-headers Size: 669 bytes Desc: Message header section URL: