From ihsan at opencsw.org  Tue Jan  4 16:14:56 2022
From: ihsan at opencsw.org (=?utf-8?B?xLBoc2FuIERvxJ9hbg==?=)
Date: Tue, 4 Jan 2022 16:14:56 +0100
Subject: Please install libldns3
Message-ID: <E7BDB3E9-4DC6-43F6-B483-0BA2A0A88A09@opencsw.org>

Hi Dago,

Could you please install libdns3 and upgrade libdns_dev on the buildfarm?




Regards

Ihsan

From philip.hazel at gmail.com  Fri Jan 14 14:07:24 2022
From: philip.hazel at gmail.com (Philip Hazel)
Date: Fri, 14 Jan 2022 13:07:24 +0000
Subject: PCRE2 infrastructure has moved
In-Reply-To: <CADz7ckYy_bKL0rp7WPcLsa3rK6E+QAVxUY+g5pxdATFLHYjqvA@mail.gmail.com>
References: <CADz7ckYXWKV4OJ5_e1E-T1nxMawOHTv+-VB20P8PDbpeoQ5DCA@mail.gmail.com>
 <3106DDEA-0BA2-41A5-B1C7-3E76B8703417@opencsw.org>
 <CADz7ckYy_bKL0rp7WPcLsa3rK6E+QAVxUY+g5pxdATFLHYjqvA@mail.gmail.com>
Message-ID: <CADz7ckYLHXMBRLwt0-x+avr=CmF0_sPKP7xvHTi0HWwBpx8LGA@mail.gmail.com>

Hi,

I sent the message below on December 11, and as I hadn't had a reply, I
checked on your buildfarm for PCRE2. It doesn't seem to have done anything
since July last year, which is odd, because there has been plenty of
activity since then.

Regards,
Philip


On Sat, 11 Dec 2021 at 09:45, Philip Hazel <philip.hazel at gmail.com> wrote:

> Hi,
>
> I have at last got round to dealing with this. I think I have followed
> your instructions for setting up the webhook in GitHub, and the personal
> access token is
>
> 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
>
> I hope I've done it right!
>
> Regards,
> Philip
>
>
> On Thu, 2 Sept 2021 at 09:48, Dagobert Michelsen <dam at opencsw.org> wrote:
>
>> Hi Philip,
>>
>> Am 27.08.2021 um 17:11 schrieb Philip Hazel <philip.hazel at gmail.com>:
>> > For some time now the OpenCSW project Buildbot has been (very usefully!
>> thank you) running builds of PCRE and PCRE2. The original PCRE (PCRE1) is
>> now at end of life and no more changes are planned, so there is no point in
>> continuing with those builds. The PCRE2 project has just moved from
>> vcs.exim.org to a new home on GitHub (
>> https://github.com/PhilipHazel/pcre2) and that is where development will
>> now happen. I'd be grateful if you could update your Waterfall
>> configuration to pull the sources from the new repository. The old one will
>> no longer change, and at some point soon it will disappear. Note also that
>> my primary email has moved to this gmail account.
>>
>> Sure. There is also the possibility to integrate the CI more tightly in
>> the GitHub build process: the build can be triggered via GitHub push
>> and pull requests. For this to work it would be nice if you could set
>> up a hook in the GitHub pcre2 project:
>>
>> Payload URL:
>> http://github:buildbotcsw at buildbot.opencsw.org:8010/change_hook/github
>> Content Type: application/json
>> Secret: c0b145501adb70e910cd384f2c4034e9
>> Events: pull request, push
>>
>> Then either generate a personal access token with the scope ?repo:status?
>> or add
>> @buildbot-opencsw to the collectd-project as collaborator (token is
>> probably more secure).
>> Please send me the token so I can configure it properly in our buildbot.
>>
>> After that hopefully pull requests will be automatically checked on
>> Solaris and status
>> easily visible directly in GitHub next to the commit.
>>
>> Of course I can also stick to the existing polling method if you think
>> this is
>> not helpfull or too much work :-)
>>
>>
>> Best regards
>>
>>   ? Dago
>>
>>
>> --
>> "You don't become great by trying to be great, you become great by
>> wanting to do something,
>> and then doing it so hard that you become great in the process." - xkcd
>> #896
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20220114/5667fa41/attachment.html>

From dam at opencsw.org  Wed Jan 19 14:54:23 2022
From: dam at opencsw.org (Dagobert Michelsen)
Date: Wed, 19 Jan 2022 14:54:23 +0100
Subject: PCRE2 infrastructure has moved
In-Reply-To: <CADz7ckYLHXMBRLwt0-x+avr=CmF0_sPKP7xvHTi0HWwBpx8LGA@mail.gmail.com>
References: <CADz7ckYXWKV4OJ5_e1E-T1nxMawOHTv+-VB20P8PDbpeoQ5DCA@mail.gmail.com>
 <3106DDEA-0BA2-41A5-B1C7-3E76B8703417@opencsw.org>
 <CADz7ckYy_bKL0rp7WPcLsa3rK6E+QAVxUY+g5pxdATFLHYjqvA@mail.gmail.com>
 <CADz7ckYLHXMBRLwt0-x+avr=CmF0_sPKP7xvHTi0HWwBpx8LGA@mail.gmail.com>
Message-ID: <B57C0EBD-47AD-4F6C-80A3-1DCFE5C7275A@opencsw.org>

Hi Philip,

> Am 14.01.2022 um 14:07 schrieb Philip Hazel <philip.hazel at gmail.com>:
> 
> Hi,
> 
> I sent the message below on December 11, and as I hadn't had a reply, I checked on your buildfarm for PCRE2. It doesn't seem to have done anything since July last year, which is odd, because there has been plenty of activity since then. 

I have also received your earlier email, please accept my apologies to not have looked into this issue earlier
as I am currently pretty involved in a work project sucking up a lot of my time. I?ll hopefully have a look
when I have some sparetime in the near future.


Best regards

  ?  Dago

> 
> Regards,
> Philip
> 
> 
> On Sat, 11 Dec 2021 at 09:45, Philip Hazel <philip.hazel at gmail.com <mailto:philip.hazel at gmail.com>> wrote:
> Hi,
> 
> I have at last got round to dealing with this. I think I have followed your instructions for setting up the webhook in GitHub, and the personal access token is
> 
> 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
> 
> I hope I've done it right!
> 
> Regards,
> Philip
> 
> 
> On Thu, 2 Sept 2021 at 09:48, Dagobert Michelsen <dam at opencsw.org <mailto:dam at opencsw.org>> wrote:
> Hi Philip,
> 
> Am 27.08.2021 um 17:11 schrieb Philip Hazel <philip.hazel at gmail.com <mailto:philip.hazel at gmail.com>>:
> > For some time now the OpenCSW project Buildbot has been (very usefully! thank you) running builds of PCRE and PCRE2. The original PCRE (PCRE1) is now at end of life and no more changes are planned, so there is no point in continuing with those builds. The PCRE2 project has just moved from vcs.exim.org <http://vcs.exim.org/> to a new home on GitHub (https://github.com/PhilipHazel/pcre2 <https://github.com/PhilipHazel/pcre2>) and that is where development will now happen. I'd be grateful if you could update your Waterfall configuration to pull the sources from the new repository. The old one will no longer change, and at some point soon it will disappear. Note also that my primary email has moved to this gmail account.
> 
> Sure. There is also the possibility to integrate the CI more tightly in
> the GitHub build process: the build can be triggered via GitHub push
> and pull requests. For this to work it would be nice if you could set
> up a hook in the GitHub pcre2 project:
> 
> Payload URL: http://github:buildbotcsw at buildbot.opencsw.org:8010/change_hook/github <http://github:buildbotcsw at buildbot.opencsw.org:8010/change_hook/github>
> Content Type: application/json
> Secret: c0b145501adb70e910cd384f2c4034e9
> Events: pull request, push
> 
> Then either generate a personal access token with the scope ?repo:status? or add
> @buildbot-opencsw to the collectd-project as collaborator (token is probably more secure).
> Please send me the token so I can configure it properly in our buildbot.
> 
> After that hopefully pull requests will be automatically checked on Solaris and status
> easily visible directly in GitHub next to the commit.
> 
> Of course I can also stick to the existing polling method if you think this is
> not helpfull or too much work :-)
> 
> 
> Best regards
> 
>   ? Dago
> 
> 
> -- 
> "You don't become great by trying to be great, you become great by wanting to do something,
> and then doing it so hard that you become great in the process." - xkcd #896
> 

-- 
"You don't become great by trying to be great, you become great by wanting to do something,
and then doing it so hard that you become great in the process." - xkcd #896

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/buildfarm/attachments/20220119/2b7e4c32/attachment-0001.html>