From jgoerzen at opencsw.org Thu Dec 5 20:19:29 2024 From: jgoerzen at opencsw.org (Jake Goerzen) Date: Thu, 5 Dec 2024 11:19:29 -0800 Subject: openssh-9.9p1 packages ready in experimental Message-ID: <496fe31c-d8ff-44ff-887f-c0a88a92c964@opencsw.org> Hi Dago, ? I have openssh-9.9p1 packages ready to try in experimental. I've installed them on my systems and they are working as expected.? These have been built with --enable-dsa-keys so that ssh will have the options needed to connect to ILOM's and stuff like that.? I figured we would want that enabled atleast for now. Here is from the openssh-9.9p1 release notes: Future deprecation notice ========================= OpenSSH plans to remove support for the DSA signature algorithm in early 2025. This release disables DSA by default at compile time. DSA, as specified in the SSHv2 protocol, is inherently weak - being limited to a 160 bit private key and use of the SHA1 digest. Its estimated security level is only 80 bits symmetric equivalent. OpenSSH has disabled DSA keys by default since 2015 but has retained run-time optional support for them. DSA was the only mandatory-to- implement algorithm in the SSHv2 RFCs, mostly because alternative algorithms were encumbered by patents when the SSHv2 protocol was specified. This has not been the case for decades at this point and better algorithms are well supported by all actively-maintained SSH implementations. We do not consider the costs of maintaining DSA in OpenSSH to be justified and hope that removing it from OpenSSH can accelerate its wider deprecation in supporting cryptography libraries. Currently DSA is disabled at compile time. The final step of removing DSA support entirely is planned for the first OpenSSH release of 2025. DSA support may be re-enabled on OpenBSD by setting "DSAKEY=yes" in Makefile.inc. To enable DSA support in portable OpenSSH, pass the "--enable-dsa-keys" option to configure. Best regards, Jake From dam at opencsw.org Fri Dec 6 09:09:36 2024 From: dam at opencsw.org (Dagobert Michelsen) Date: Fri, 6 Dec 2024 09:09:36 +0100 Subject: openssh-9.9p1 packages ready in experimental In-Reply-To: <496fe31c-d8ff-44ff-887f-c0a88a92c964@opencsw.org> References: <496fe31c-d8ff-44ff-887f-c0a88a92c964@opencsw.org> Message-ID: Hi Jake, > Am 05.12.2024 um 20:19 schrieb Jake Goerzen : > I have openssh-9.9p1 packages ready to try in experimental. I've installed them on my systems and they are working as expected. These have been built with --enable-dsa-keys so that ssh will have the options needed to connect to ILOM's and stuff like that. I figured we would want that enabled atleast for now. Here is from the openssh-9.9p1 release notes: Excellent work! I habe installed the openssh and openssh_client on experimental*. Best regards ? Dago -- "You don't become great by trying to be great, you become great by wanting to do something, and then doing it so hard that you become great in the process." - xkcd #896 From jgoerzen at opencsw.org Mon Dec 16 21:45:25 2024 From: jgoerzen at opencsw.org (Jake Goerzen) Date: Mon, 16 Dec 2024 12:45:25 -0800 Subject: new libsdl2 packages Message-ID: <29a3859f-7e93-4ded-a789-d9fe2268c8f5@opencsw.org> Hi Dago, ? Please Install 2 NEW packages on unstable10*: ??????? CSWlibsdl2-2-0-0-2.30.10,REV=2024.12.16 (opencsw-official/unstable) ??????? CSWlibsdl2-dev-2.30.10,REV=2024.12.16 (opencsw-official/unstable) Then I'll proceed with refreshing SDL2 libraries (sdl2image, sdl2mixer, etc). Thanks, Jake From dam at opencsw.org Tue Dec 17 09:04:32 2024 From: dam at opencsw.org (Dagobert Michelsen) Date: Tue, 17 Dec 2024 09:04:32 +0100 Subject: new libsdl2 packages In-Reply-To: <29a3859f-7e93-4ded-a789-d9fe2268c8f5@opencsw.org> References: <29a3859f-7e93-4ded-a789-d9fe2268c8f5@opencsw.org> Message-ID: <9964374F-283A-4BE4-B2B4-A4072618A9AA@opencsw.org> Hi Jake, > Am 16.12.2024 um 21:45 schrieb Jake Goerzen : > Please Install 2 NEW packages on unstable10*: > > CSWlibsdl2-2-0-0-2.30.10,REV=2024.12.16 (opencsw-official/unstable) > CSWlibsdl2-dev-2.30.10,REV=2024.12.16 (opencsw-official/unstable) > > Then I'll proceed with refreshing SDL2 libraries (sdl2image, sdl2mixer, etc). Excellent, done! Best regards ? Dago -- "You don't become great by trying to be great, you become great by wanting to do something, and then doing it so hard that you become great in the process." - xkcd #896 From jgoerzen at opencsw.org Thu Dec 19 18:46:56 2024 From: jgoerzen at opencsw.org (Jake Goerzen) Date: Thu, 19 Dec 2024 09:46:56 -0800 Subject: please install updated libwebp libwebp-dev Message-ID: <7990836a-a8f3-481c-b563-f71bf7abcb75@opencsw.org> Hi Dago, ? While updating sdl2image I found it doesn't find libwebp correctly and would benefit from a newer libwebp: checking for libwebpdemux... no checking for webp/demux.h... no checking for WebPDemuxGetFrame in -lwebpdemux... no checking for libwebp... yes configure: WARNING: *** Unable to find WEBP library (https://developers.google.com/speed/webp) configure: WARNING: WEBP image loading disabled So, I went to work on updating our libwebp recipe/package and new packages have been built and submitted to unstable catalog.? The newer libwebp also benefited from linking against new libsdl2 and improved capability (GIF support).? If there are no objections please install them on unstable10s/x. Jolly good! All checks passed, no error tags reported. The following packages have been built: ? CSWlibsharpyuv0 /home/jgoerzen/pkgs/libsharpyuv0-1.4.0,REV=2024.12.19-SunOS5.10-i386-CSW.pkg.gz ? CSWlibwebp-dev /home/jgoerzen/pkgs/libwebp_dev-1.4.0,REV=2024.12.19-SunOS5.10-i386-CSW.pkg.gz ? CSWlibwebp7 /home/jgoerzen/pkgs/libwebp7-1.4.0,REV=2024.12.19-SunOS5.10-i386-CSW.pkg.gz ? CSWlibwebpdemux2 /home/jgoerzen/pkgs/libwebpdemux2-1.4.0,REV=2024.12.19-SunOS5.10-i386-CSW.pkg.gz ? CSWlibwebpmux3 /home/jgoerzen/pkgs/libwebpmux3-1.4.0,REV=2024.12.19-SunOS5.10-i386-CSW.pkg.gz ? CSWwebp /home/jgoerzen/pkgs/webp-1.4.0,REV=2024.12.19-SunOS5.10-i386-CSW.pkg.gz ??????? [package-svr4] complete for libwebp. Jolly good! All checks passed, no error tags reported. The following packages have been built: ? CSWlibsharpyuv0 /home/jgoerzen/pkgs/libsharpyuv0-1.4.0,REV=2024.12.19-SunOS5.10-sparc-CSW.pkg.gz ? CSWlibwebp-dev /home/jgoerzen/pkgs/libwebp_dev-1.4.0,REV=2024.12.19-SunOS5.10-sparc-CSW.pkg.gz ? CSWlibwebp7 /home/jgoerzen/pkgs/libwebp7-1.4.0,REV=2024.12.19-SunOS5.10-sparc-CSW.pkg.gz ? CSWlibwebpdemux2 /home/jgoerzen/pkgs/libwebpdemux2-1.4.0,REV=2024.12.19-SunOS5.10-sparc-CSW.pkg.gz ? CSWlibwebpmux3 /home/jgoerzen/pkgs/libwebpmux3-1.4.0,REV=2024.12.19-SunOS5.10-sparc-CSW.pkg.gz ? CSWwebp /home/jgoerzen/pkgs/webp-1.4.0,REV=2024.12.19-SunOS5.10-sparc-CSW.pkg.gz ??????? [package-svr4] complete for libwebp. All checks successful. Proceeding. Inserting libsharpyuv0 (i386 SunOS5.10) into catalog unstable i386 SunOS5.10 Inserting libwebp7 (i386 SunOS5.10) into catalog unstable i386 SunOS5.10 Inserting libwebp_dev (i386 SunOS5.10) into catalog unstable i386 SunOS5.10 Inserting libwebpdemux2 (i386 SunOS5.10) into catalog unstable i386 SunOS5.10 Inserting libwebpmux3 (i386 SunOS5.10) into catalog unstable i386 SunOS5.10 Inserting webp (i386 SunOS5.10) into catalog unstable i386 SunOS5.10 Inserting libsharpyuv0 (i386 SunOS5.10) into catalog unstable i386 SunOS5.11 Inserting libwebp7 (i386 SunOS5.10) into catalog unstable i386 SunOS5.11 Inserting libwebp_dev (i386 SunOS5.10) into catalog unstable i386 SunOS5.11 Inserting libwebpdemux2 (i386 SunOS5.10) into catalog unstable i386 SunOS5.11 Inserting libwebpmux3 (i386 SunOS5.10) into catalog unstable i386 SunOS5.11 Inserting webp (i386 SunOS5.10) into catalog unstable i386 SunOS5.11 Inserting libsharpyuv0 (sparc SunOS5.10) into catalog unstable sparc SunOS5.10 Inserting libwebp7 (sparc SunOS5.10) into catalog unstable sparc SunOS5.10 Inserting libwebp_dev (sparc SunOS5.10) into catalog unstable sparc SunOS5.10 Inserting libwebpdemux2 (sparc SunOS5.10) into catalog unstable sparc SunOS5.10 Inserting libwebpmux3 (sparc SunOS5.10) into catalog unstable sparc SunOS5.10 Inserting webp (sparc SunOS5.10) into catalog unstable sparc SunOS5.10 Inserting libsharpyuv0 (sparc SunOS5.10) into catalog unstable sparc SunOS5.11 Inserting libwebp7 (sparc SunOS5.10) into catalog unstable sparc SunOS5.11 Inserting libwebp_dev (sparc SunOS5.10) into catalog unstable sparc SunOS5.11 Inserting libwebpdemux2 (sparc SunOS5.10) into catalog unstable sparc SunOS5.11 Inserting libwebpmux3 (sparc SunOS5.10) into catalog unstable sparc SunOS5.11 Inserting webp (sparc SunOS5.10) into catalog unstable sparc SunOS5.11 Best regards, Jake From dam at opencsw.org Thu Dec 19 18:50:28 2024 From: dam at opencsw.org (Dagobert Michelsen) Date: Thu, 19 Dec 2024 18:50:28 +0100 Subject: please install updated libwebp libwebp-dev In-Reply-To: <7990836a-a8f3-481c-b563-f71bf7abcb75@opencsw.org> References: <7990836a-a8f3-481c-b563-f71bf7abcb75@opencsw.org> Message-ID: <129C518E-8269-484C-9C94-900DBC2826F0@opencsw.org> Hi Jake, > Am 19.12.2024 um 18:46 schrieb Jake Goerzen : > While updating sdl2image I found it doesn't find libwebp correctly and would benefit from a newer libwebp: Excellent, installed on unstable*. Best regards ? Dago -- "You don't become great by trying to be great, you become great by wanting to do something, and then doing it so hard that you become great in the process." - xkcd #896