[csw-devel] SF.net SVN: gar:[2937] csw/mgar/pkg
dmichelsen at users.sourceforge.net
dmichelsen at users.sourceforge.net
Fri Jan 30 11:44:13 CET 2009
Revision: 2937
http://gar.svn.sourceforge.net/gar/?rev=2937&view=rev
Author: dmichelsen
Date: 2009-01-30 10:44:13 +0000 (Fri, 30 Jan 2009)
Log Message:
-----------
xtide: Initial commit of legacy build description
Added Paths:
-----------
csw/mgar/pkg/xtide/
csw/mgar/pkg/xtide/branches/
csw/mgar/pkg/xtide/tags/
csw/mgar/pkg/xtide/trunk/
csw/mgar/pkg/xtide/trunk/Makefile
csw/mgar/pkg/xtide/trunk/files/
csw/mgar/pkg/xtide/trunk/files/CSWpackage.gspec
csw/mgar/pkg/xtide/trunk/legacy/
csw/mgar/pkg/xtide/trunk/legacy/xtide/
csw/mgar/pkg/xtide/trunk/legacy/xtide/BUILD.NOTES
csw/mgar/pkg/xtide/trunk/legacy/xtide/README
csw/mgar/pkg/xtide/trunk/legacy/xtide/copyright
csw/mgar/pkg/xtide/trunk/legacy/xtide/depend
csw/mgar/pkg/xtide/trunk/legacy/xtide/pkginfo
csw/mgar/pkg/xtide/trunk/legacy/xtide/prototype
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.libtcdConfig
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.tide
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtide
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig-gcc
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideMake.mods
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xttpd
csw/mgar/pkg/xtide/trunk/legacy/xtide/src/Makefile
csw/mgar/pkg/xtide/trunk/legacy/xtideh/
csw/mgar/pkg/xtide/trunk/legacy/xtideh/README
csw/mgar/pkg/xtide/trunk/legacy/xtideh/copyright
csw/mgar/pkg/xtide/trunk/legacy/xtideh/depend
csw/mgar/pkg/xtide/trunk/legacy/xtideh/pkginfo
csw/mgar/pkg/xtide/trunk/legacy/xtideh/prototype
csw/mgar/pkg/xtide/trunk/legacy/xtideh/src/
csw/mgar/pkg/xtide/trunk/legacy/xtideh/src/Makefile
csw/mgar/pkg/xtide/trunk/legacy/xtidew/
csw/mgar/pkg/xtide/trunk/legacy/xtidew/README
csw/mgar/pkg/xtide/trunk/legacy/xtidew/copyright
csw/mgar/pkg/xtide/trunk/legacy/xtidew/depend
csw/mgar/pkg/xtide/trunk/legacy/xtidew/pkginfo
csw/mgar/pkg/xtide/trunk/legacy/xtidew/prototype
csw/mgar/pkg/xtide/trunk/legacy/xtidew/src/
csw/mgar/pkg/xtide/trunk/legacy/xtidew/src/Makefile
Property changes on: csw/mgar/pkg/xtide/trunk
___________________________________________________________________
Added: svn:ignore
+ cookies
download
work
Added: svn:externals
+ gar https://gar.svn.sf.net/svnroot/gar/csw/mgar/gar/v2
Added: csw/mgar/pkg/xtide/trunk/Makefile
===================================================================
--- csw/mgar/pkg/xtide/trunk/Makefile (rev 0)
+++ csw/mgar/pkg/xtide/trunk/Makefile 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,23 @@
+GARNAME = package
+GARVERSION = 1.0
+CATEGORIES = category
+
+DESCRIPTION = Brief description
+define BLURB
+ Long description
+endef
+
+MASTER_SITES =
+DISTFILES = $(GARNAME)-$(GARVERSION).tar.gz
+DISTFILES += $(call admfiles,CSWpackage,)
+
+# We define upstream file regex so we can be notifed of new upstream software release
+UFILES_REGEX = -(\d+(?:\.\d+)*).tar.gz
+
+# If the url used to check for software update is different of MASTER_SITES, then
+# uncomment the next line. Otherwise it is set by default to the value of MASTER_SITES
+# UPSTREAM_MASTER_SITES =
+
+CONFIGURE_ARGS = $(DIRPATHS)
+
+include gar/category.mk
Added: csw/mgar/pkg/xtide/trunk/files/CSWpackage.gspec
===================================================================
--- csw/mgar/pkg/xtide/trunk/files/CSWpackage.gspec (rev 0)
+++ csw/mgar/pkg/xtide/trunk/files/CSWpackage.gspec 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,4 @@
+%var bitname package
+%var pkgname CSWpackage
+%include url file://%{PKGLIB}/csw_dyndepend.gspec
+%copyright url file://%{WORKSRC}/LICENSE
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/BUILD.NOTES
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/BUILD.NOTES (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/BUILD.NOTES 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,89 @@
+###############################################################################
+#
+# FILE: BUILD.NOTES
+#
+# DESCRIPTION: Build notes for the XTIDE package. These are notes concerning
+# the compiling and testing of this package.
+#
+# Use the detailed instructions in the README file for package
+# creation.
+#
+# PACKAGE: CSWxtide
+#
+# CUR VER: xtide Version 2.9.5
+#
+# REVISION: 02-04-08
+#
+# NOTES: *
+#
+###############################################################################
+
+-------------------------------------------------------------------------------
+HISTORY:
+-------------------------------------------------------------------------------
+Date: Version: Notes:
+-------------------------------------------------------------------------------
+10-25-04 2.7.1 Initial 2.7.1 package creation
+01-31-05 2.8.2
+12-22-07 2.9.5
+02-04-08 2.10-RC1
+-------------------------------------------------------------------------------
+
+###############################################################################
+# NOTES FOR SUN COMPILER BUILD
+###############################################################################
+
+-------------------------------------------------------------------------------
+SPARC: (CC)
+-------------------------------------------------------------------------------
+
+make libtcd:
+ * No errors or warnings.
+
+
+make xtide:
+ * There are numerous warning message issued during the build.
+ These are generally string literal conversions to char*.
+ Too many to list here.
+
+-------------------------------------------------------------------------------
+
+
+
+-------------------------------------------------------------------------------
+INTEL: (CC)
+-------------------------------------------------------------------------------
+
+make: * Same warnings and errors as with SPARC
+
+-------------------------------------------------------------------------------
+
+###############################################################################
+# NOTES FOR GCC/G++ COMPILER BUILD
+###############################################################################
+
+-------------------------------------------------------------------------------
+PARC: (gcc/g++)
+-------------------------------------------------------------------------------
+
+make libtcd:
+ * No errors or warnings.
+
+
+
+make xtide:
+ Station.cc: In function `interval_rep_t llround(double)':
+ Station.cc:46: warning: converting to `interval_rep_t' from `double'
+ Station.cc:48: warning: converting to `interval_rep_t' from `double'
+
+------------------------------------------------------------------------------
+
+
+
+-------------------------------------------------------------------------------
+INTEL: (gcc/g++)
+-------------------------------------------------------------------------------
+
+make: * Same warnings and errors as with SPARC
+
+-------------------------------------------------------------------------------
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/README
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/README (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/README 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,255 @@
+###############################################################################
+#
+# FILE: README
+#
+# DESCRIPTION: Instructions for creating the XTIDE package. Refer to the
+# BUILD.NOTES file for specific information about the actual
+# build and testing of the current version.
+#
+# PACKAGE: CSWxtide
+#
+# REVISION: 02-05-08
+#
+###############################################################################
+
+-------------------------------------------------------------------------------
+01: Switch to the correct build machine
+-------------------------------------------------------------------------------
+
+ SPARC: ra
+ or
+ INTEL: thor
+
+-------------------------------------------------------------------------------
+02: Update the pkginfo file VERSION=<version>[,REV=YYYY.MM.DD]
+-------------------------------------------------------------------------------
+
+ cd ${HOME}/pkgs/xtide
+ vi pkginfo
+ [edit the VERSION line including the ,REV=YYYY.MM.DD string]
+ [edit the ARCH line for either a 'sparc' or 'i386' build]
+
+ NOTE: No '-' allowed in the VERSION string
+
+-------------------------------------------------------------------------------
+03: Download and/or unpack source code [**** ONLY ONCE PER SESSION ****]
+-------------------------------------------------------------------------------
+
+ cd src
+
+ For new versions of software:
+ vi Makefile [set XVER to current xtide version]
+ [set LVER to current libtcd version]
+ make get [download new source code]
+ make extract [unpack new source code]
+
+ For software updates:
+ make unpack [unpack existing source code]
+
+-------------------------------------------------------------------------------
+04: Build the libtcd static library
+-------------------------------------------------------------------------------
+
+ For Sun CC compiler:
+ SPARC: export CC="cc -fast -xarch=v8 -xnolibmopt -xstrconst -xildoff"
+ INTEL: export CC="cc -fast -xarch=386 -xstrconst -xildoff"
+
+ For GNU gcc compiler:
+ unset CC
+
+ For either compiler:
+
+ cd libtcd*[0-9]
+
+ make clean
+ rm -f Makefile
+ ../.libtcdConfig
+ make
+
+-------------------------------------------------------------------------------
+05: Make xtide links to libtcd library and header files
+-------------------------------------------------------------------------------
+
+ cd ..
+
+ make links
+
+ ls -als xtide*[0-9]/libtcd xtide*[0-9]/tcd.h
+ ls -alsL xtide*[0-9]/libtcd xtide*[0-9]/tcd.h
+
+-------------------------------------------------------------------------------
+06: Modify the install target in Makefile.in, using the contents in the
+ .xtideMake.mods file: [**** ONLY ONCE PER RELEASE ****]
+-------------------------------------------------------------------------------
+
+ cd xtide*[0-9]
+ vi ../.xtideMake.mods Makefile.in
+
+-------------------------------------------------------------------------------
+07: Update copyright file [**** ONLY ONCE PER RELEASE ****]
+-------------------------------------------------------------------------------
+
+ vi README ${HOME}/pkgs/xtide/copyright
+ [copy entire "License and disclaimer" section to copyright file]
+ [eliminate the word "Icon" from "Icon License and disclaimer]
+
+-------------------------------------------------------------------------------
+08: Set the proper build environment
+-------------------------------------------------------------------------------
+
+ For Sun CC compiler:
+ SPARC: export CXX="CC -fast -xarch=v8 -library=stlport4"
+ INTEL: export CXX="CC -fast -xarch=386 -library=stlport4"
+
+ For GNU gcc compiler:
+ * NOTE: If compiling with GNU gcc/g++ compilers, you must make sure
+ you are compiling with gcc V3* and not 2.95.3. Check it
+ with: gcc --version
+
+-------------------------------------------------------------------------------
+09: Compile the software using customized configure script
+-------------------------------------------------------------------------------
+
+ ---------------------------------------------------------------------------
+ For Sun CC compiler:
+ ---------------------------------------------------------------------------
+ make clean
+ rm -f Makefile # force Makefile recreation
+ ../.xtideConfig
+
+ script zzzz # save output in file zzzz
+ make
+ exit # terminate script
+
+ ---------------------------------------------------------------------------
+ For GNU gcc compiler:
+ ---------------------------------------------------------------------------
+
+ make clean
+ rm -f Makefile # force Makefile recreation
+ ../.xtideConfig-gcc
+
+ script zzzz # save output in file zzzz
+ make
+ exit # terminate script
+
+-------------------------------------------------------------------------------
+10: Install executable in a staging directory
+-------------------------------------------------------------------------------
+
+ rm -rf cswstage
+ stagepkg DESTDIR=$PWD/cswstage install
+
+-------------------------------------------------------------------------------
+11: Update the prototype file
+-------------------------------------------------------------------------------
+
+ cd cswstage
+ grep '^[df]' prototype | grep -v 'root bin'
+ [check: 'f'iles & 'd'irs have owner/group 'root bin']
+ egrep '0444|0555' prototype
+ [check: permissions should all be 0644 & 0755]
+ grep '^i depend$' prototype
+ [check: the third line should be: i depend ]
+
+-------------------------------------------------------------------------------
+12: Check changes in prototype from previous release and update file
+-------------------------------------------------------------------------------
+
+ diff ${HOME}/pkgs/xtide/prototype prototype
+ [if any odd differences, investigate and fix]
+
+ cp prototype ${HOME}/pkgs/xtide
+
+-------------------------------------------------------------------------------
+13: Create the package xtide-*-SunOS5.8-{sparc,386i}-CSW.pkg.gz
+-------------------------------------------------------------------------------
+
+ cd ${HOME}/pkgs/xtide
+ createpkg -r ${HOME}/pkgs/xtide/src/xtide*[0-9]/cswstage
+
+ [The package name should follow this format:]
+
+ <name>-<version>[,REV=YYYY.MM.DD]-<OSname><OSrel>-<arch>-CSW.pkg.gz
+
+ NOTE: Packaging fails due to the xtideh and xtidew packages not being
+ installed on the build machines.
+
+ ERROR: information for "CSWxtidew" was not found
+ ERROR: invalid package CSWxtidew specified
+ ERROR: failed check.
+
+ This should be the last step in the checking process so
+ everything is actually OK. To finish the packaging step,
+ simply gzip up the file with:
+
+ gzip xtide*pkg
+
+-------------------------------------------------------------------------------
+14: Examine list of libraries used to see if any new CSW dependencies exist
+-------------------------------------------------------------------------------
+
+ *** Current dependencies are listed in the depend file ***
+
+ If a new library is found, check package dependency:
+
+ pkgchk -l -p /opt/csw/lib/lib<...>
+
+ Add entry to the depend file:
+
+ P CSW<pkg>
+
+ Now repeat from step 08 and recreate the package
+
+-------------------------------------------------------------------------------
+15: Make package for other platform.
+-------------------------------------------------------------------------------
+
+ Go to step 01 and repeat for other architecture
+
+-------------------------------------------------------------------------------
+16: Clean up
+-------------------------------------------------------------------------------
+
+ cd ${HOME}/pkgs/xtide/src/libtcd*[0-9]
+ make clean
+
+ cd ${HOME}/pkgs/xtide/src/xtide*[0-9]
+ make clean ; rm -rf cswstage zzzz
+
+ cd ${HOME}/pkgs/xtide/src
+ make pack # if req'd, tar up and gzip source
+ make clean # remove the source code
+
+-------------------------------------------------------------------------------
+18: Copy the newsparc and i386 packages to the testing or installation area
+-------------------------------------------------------------------------------
+
+ cd pkgs/xtide
+
+ cp xtide-*.pkg.gz /export/medusa/testing
+ or
+ cp xtide-*.pkg.gz /export/medusa/newpkgs
+
+-------------------------------------------------------------------------------
+19: Copy the source code tarball to the holding area
+-------------------------------------------------------------------------------
+
+ cd src
+ cp libtcd-*.gz xtide-*.gz /export/medusa/src
+
+-------------------------------------------------------------------------------
+20: Notify users for testing or package administrator for update
+-------------------------------------------------------------------------------
+
+ Post message to the Blastwave maint list regarding testing
+ or
+ Email phil at bolthole.com (Philip Brown) describing the update
+
+-------------------------------------------------------------------------------
+21: Build the xtideh and xtidew packages
+-------------------------------------------------------------------------------
+
+ If required, repackage the xtide harmonics & shoreline data files
+
+------------------------------------------------------------------------------
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/copyright
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/copyright (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/copyright 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,722 @@
+License and disclaimer
+
+ NOTE. The license and disclaimer appearing below applies to the XTide
+ program itself. For information about permissions on the harmonic
+ constants, see
+ [3]http://www.flaterco.com/xtide/harmonics_boilerplate.txt and
+ [4]http://harmonics.unh.edu/xtide/harmonics_boilerplate.txt.
+
+ XTide Copyright \xA9 1998 David Flater
+
+ This software is provided under the terms of the GNU General Public
+ License, either version 3 of the License, or (at your option) any later
+ version.
+
+ Although the package as a whole is GPL, some individual source files
+ are public domain. Consult their header comments for details.
+
+ NOT FOR NAVIGATION
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The author
+ assumes no liability for damages arising from use of this program OR of
+ any 'harmonics data' that might be distributed with it. For details,
+ see the appended GNU General Public License.
+
+ (Accurate tide predictions can only be made if the 'harmonics data' for
+ the relevant location are good. Unfortunately, the only way the
+ maintainer of those data has of knowing when they are bad is when
+ someone with access to authoritative tide predictions or observations
+ reports a problem. You should not use this program or any data files
+ that might be distributed with it if anyone or anything could come to
+ harm as a result of an incorrect tide prediction. NOAA and similar
+ agencies in other countries can provide you with certified tide
+ predictions if that is what you need.)
+
+ XTide's predictions do not incorporate the effects of tropical storms,
+ El Ni\xF1o, seismic events, subsidence, uplift, or changes in global sea
+ level.
+ __________________________________________________________________
+
+ The tide prediction algorithm used in this program was developed with
+ United States Government funding, so no proprietary rights can be
+ attached to it. For more information, refer to the following
+ publications:
+
+ Manual of Harmonic Analysis and Prediction of Tides. Special
+ Publication No. 98, Revised (1940) Edition (reprinted 1958 with
+ corrections; reprinted again 1994). United States Government
+ Printing Office, 1994.
+
+ Computer Applications to Tides in the National Ocean Survey.
+ Supplement to Manual of Harmonic Analysis and Prediction of Tides
+ (Special Publication No. 98). National Ocean Service, National
+ Oceanic and Atmospheric Administration, U.S. Department of Commerce,
+ January 1982.
+ __________________________________________________________________
+
+ GNU GENERAL PUBLIC LICENSE
+
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <[5]http://fsf.org/>
+
+ Everyone is permitted to copy and distribute verbatim copies of this
+ license document, but changing it is not allowed.
+
+ Preamble
+
+ The GNU General Public License is a free, copyleft license for software
+ and other kinds of works.
+
+ The licenses for most software and other practical works are designed
+ to take away your freedom to share and change the works. By contrast,
+ the GNU General Public License is intended to guarantee your freedom to
+ share and change all versions of a program--to make sure it remains
+ free software for all its users. We, the Free Software Foundation, use
+ the GNU General Public License for most of our software; it applies
+ also to any other work released this way by its authors. You can apply
+ it to your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+ price. Our General Public Licenses are designed to make sure that you
+ have the freedom to distribute copies of free software (and charge for
+ them if you wish), that you receive source code or can get it if you
+ want it, that you can change the software or use pieces of it in new
+ free programs, and that you know you can do these things.
+
+ To protect your rights, we need to prevent others from denying you
+ these rights or asking you to surrender the rights. Therefore, you
+ have certain responsibilities if you distribute copies of the software,
+ or if you modify it: responsibilities to respect the freedom of
+ others.
+
+ For example, if you distribute copies of such a program, whether gratis
+ or for a fee, you must pass on to the recipients the same freedoms that
+ you received. You must make sure that they, too, receive or can get
+ the source code. And you must show them these terms so they know their
+ rights.
+
+ Developers that use the GNU GPL protect your rights with two steps:
+ (1) assert copyright on the software, and (2) offer you this License
+ giving you legal permission to copy, distribute and/or modify it.
+
+ For the developers' and authors' protection, the GPL clearly explains
+ that there is no warranty for this free software. For both users' and
+ authors' sake, the GPL requires that modified versions be marked as
+ changed, so that their problems will not be attributed erroneously to
+ authors of previous versions.
+
+ Some devices are designed to deny users access to install or run
+ modified versions of the software inside them, although the
+ manufacturer can do so. This is fundamentally incompatible with the
+ aim of protecting users' freedom to change the software. The
+ systematic pattern of such abuse occurs in the area of products for
+ individuals to use, which is precisely where it is most unacceptable.
+ Therefore, we have designed this version of the GPL to prohibit the
+ practice for those products. If such problems arise substantially in
+ other domains, we stand ready to extend this provision to those domains
+ in future versions of the GPL, as needed to protect the freedom of
+ users.
+
+ Finally, every program is threatened constantly by software patents.
+ States should not allow patents to restrict development and use of
+ software on general-purpose computers, but in those that do, we wish to
+ avoid the special danger that patents applied to a free program could
+ make it effectively proprietary. To prevent this, the GPL assures that
+ patents cannot be used to render the program non-free.
+
+ The precise terms and conditions for copying, distribution and
+ modification follow.
+
+ TERMS AND CONDITIONS
+
+ 0. Definitions.
+
+ "This License" refers to version 3 of the GNU General Public License.
+
+ "Copyright" also means copyright-like laws that apply to other kinds of
+ works, such as semiconductor masks.
+
+ "The Program" refers to any copyrightable work licensed under this
+ License. Each licensee is addressed as "you". "Licensees" and
+ "recipients" may be individuals or organizations.
+
+ To "modify" a work means to copy from or adapt all or part of the work
+ in a fashion requiring copyright permission, other than the making of
+ an exact copy. The resulting work is called a "modified version" of
+ the earlier work or a work "based on" the earlier work.
+
+ A "covered work" means either the unmodified Program or a work based on
+ the Program.
+
+ To "propagate" a work means to do anything with it that, without
+ permission, would make you directly or secondarily liable for
+ infringement under applicable copyright law, except executing it on a
+ computer or modifying a private copy. Propagation includes copying,
+ distribution (with or without modification), making available to the
+ public, and in some countries other activities as well.
+
+ To "convey" a work means any kind of propagation that enables other
+ parties to make or receive copies. Mere interaction with a user
+ through a computer network, with no transfer of a copy, is not
+ conveying.
+
+ An interactive user interface displays "Appropriate Legal Notices" to
+ the extent that it includes a convenient and prominently visible
+ feature that (1) displays an appropriate copyright notice, and (2)
+ tells the user that there is no warranty for the work (except to the
+ extent that warranties are provided), that licensees may convey the
+ work under this License, and how to view a copy of this License. If
+ the interface presents a list of user commands or options, such as a
+ menu, a prominent item in the list meets this criterion.
+
+ 1. Source Code.
+
+ The "source code" for a work means the preferred form of the work for
+ making modifications to it. "Object code" means any non-source form of
+ a work.
+
+ A "Standard Interface" means an interface that either is an official
+ standard defined by a recognized standards body, or, in the case of
+ interfaces specified for a particular programming language, one that is
+ widely used among developers working in that language.
+
+ The "System Libraries" of an executable work include anything, other
+ than the work as a whole, that (a) is included in the normal form of
+ packaging a Major Component, but which is not part of that Major
+ Component, and (b) serves only to enable use of the work with that
+ Major Component, or to implement a Standard Interface for which an
+ implementation is available to the public in source code form. A
+ "Major Component", in this context, means a major essential component
+ (kernel, window system, and so on) of the specific operating system (if
+ any) on which the executable work runs, or a compiler used to produce
+ the work, or an object code interpreter used to run it.
+
+ The "Corresponding Source" for a work in object code form means all the
+ source code needed to generate, install, and (for an executable work)
+ run the object code and to modify the work, including scripts to
+ control those activities. However, it does not include the work's
+ System Libraries, or general-purpose tools or generally available free
+ programs which are used unmodified in performing those activities but
+ which are not part of the work. For example, Corresponding Source
+ includes interface definition files associated with source files for
+ the work, and the source code for shared libraries and dynamically
+ linked subprograms that the work is specifically designed to require,
+ such as by intimate data communication or control flow between those
+ subprograms and other parts of the work.
+
+ The Corresponding Source need not include anything that users can
+ regenerate automatically from other parts of the Corresponding Source.
+
+ The Corresponding Source for a work in source code form is that same
+ work.
+
+ 2. Basic Permissions.
+
+ All rights granted under this License are granted for the term of
+ copyright on the Program, and are irrevocable provided the stated
+ conditions are met. This License explicitly affirms your unlimited
+ permission to run the unmodified Program. The output from running a
+ covered work is covered by this License only if the output, given its
+ content, constitutes a covered work. This License acknowledges your
+ rights of fair use or other equivalent, as provided by copyright law.
+
+ You may make, run and propagate covered works that you do not convey,
+ without conditions so long as your license otherwise remains in force.
+ You may convey covered works to others for the sole purpose of having
+ them make modifications exclusively for you, or provide you with
+ facilities for running those works, provided that you comply with the
+ terms of this License in conveying all material for which you do not
+ control copyright. Those thus making or running the covered works for
+ you must do so exclusively on your behalf, under your direction and
+ control, on terms that prohibit them from making any copies of your
+ copyrighted material outside their relationship with you.
+
+ Conveying under any other circumstances is permitted solely under the
+ conditions stated below. Sublicensing is not allowed; section 10 makes
+ it unnecessary.
+
+ 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+ No covered work shall be deemed part of an effective technological
+ measure under any applicable law fulfilling obligations under article
+ 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar
+ laws prohibiting or restricting circumvention of such measures.
+
+ When you convey a covered work, you waive any legal power to forbid
+ circumvention of technological measures to the extent such
+ circumvention is effected by exercising rights under this License with
+ respect to the covered work, and you disclaim any intention to limit
+ operation or modification of the work as a means of enforcing, against
+ the work's users, your or third parties' legal rights to forbid
+ circumvention of technological measures.
+
+ 4. Conveying Verbatim Copies.
+
+ You may convey verbatim copies of the Program's source code as you
+ receive it, in any medium, provided that you conspicuously and
+ appropriately publish on each copy an appropriate copyright notice;
+ keep intact all notices stating that this License and any
+ non-permissive terms added in accord with section 7 apply to the code;
+ keep intact all notices of the absence of any warranty; and give all
+ recipients a copy of this License along with the Program.
+
+ You may charge any price or no price for each copy that you convey, and
+ you may offer support or warranty protection for a fee.
+
+ 5. Conveying Modified Source Versions.
+
+ You may convey a work based on the Program, or the modifications to
+ produce it from the Program, in the form of source code under the terms
+ of section 4, provided that you also meet all of these conditions:
+ * a) The work must carry prominent notices stating that you modified
+ it, and giving a relevant date.
+ * b) The work must carry prominent notices stating that it is
+ released under this License and any conditions added under section
+ 7. This requirement modifies the requirement in section 4 to "keep
+ intact all notices".
+ * c) You must license the entire work, as a whole, under this
+ License to anyone who comes into possession of a copy. This
+ License will therefore apply, along with any applicable section 7
+ additional terms, to the whole of the work, and all its parts,
+ regardless of how they are packaged. This License gives no
+ permission to license the work in any other way, but it does not
+ invalidate such permission if you have separately received it.
+ * d) If the work has interactive user interfaces, each must display
+ Appropriate Legal Notices; however, if the Program has interactive
+ interfaces that do not display Appropriate Legal Notices, your work
+ need not make them do so.
+
+ A compilation of a covered work with other separate and independent
+ works, which are not by their nature extensions of the covered work,
+ and which are not combined with it such as to form a larger program, in
+ or on a volume of a storage or distribution medium, is called an
+ "aggregate" if the compilation and its resulting copyright are not used
+ to limit the access or legal rights of the compilation's users beyond
+ what the individual works permit. Inclusion of a covered work in an
+ aggregate does not cause this License to apply to the other parts of
+ the aggregate.
+
+ 6. Conveying Non-Source Forms.
+
+ You may convey a covered work in object code form under the terms of
+ sections 4 and 5, provided that you also convey the machine-readable
+ Corresponding Source under the terms of this License, in one of these
+ ways:
+ * a) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by the
+ Corresponding Source fixed on a durable physical medium customarily
+ used for software interchange.
+ * b) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by a
+ written offer, valid for at least three years and valid for as long
+ as you offer spare parts or customer support for that product
+ model, to give anyone who possesses the object code either (1) a
+ copy of the Corresponding Source for all the software in the
+ product that is covered by this License, on a durable physical
+ medium customarily used for software interchange, for a price no
+ more than your reasonable cost of physically performing this
+ conveying of source, or (2) access to copy the Corresponding Source
+ from a network server at no charge.
+ * c) Convey individual copies of the object code with a copy of the
+ written offer to provide the Corresponding Source. This
+ alternative is allowed only occasionally and noncommercially, and
+ only if you received the object code with such an offer, in accord
+ with subsection 6b.
+ * d) Convey the object code by offering access from a designated
+ place (gratis or for a charge), and offer equivalent access to the
+ Corresponding Source in the same way through the same place at no
+ further charge. You need not require recipients to copy the
+ Corresponding Source along with the object code. If the place to
+ copy the object code is a network server, the Corresponding Source
+ may be on a different server (operated by you or a third party)
+ that supports equivalent copying facilities, provided you maintain
+ clear directions next to the object code saying where to find the
+ Corresponding Source. Regardless of what server hosts the
+ Corresponding Source, you remain obligated to ensure that it is
+ available for as long as needed to satisfy these requirements.
+ * e) Convey the object code using peer-to-peer transmission,
+ provided you inform other peers where the object code and
+ Corresponding Source of the work are being offered to the general
+ public at no charge under subsection 6d.
+
+ A separable portion of the object code, whose source code is excluded
+ from the Corresponding Source as a System Library, need not be included
+ in conveying the object code work.
+
+ A "User Product" is either (1) a "consumer product", which means any
+ tangible personal property which is normally used for personal, family,
+ or household purposes, or (2) anything designed or sold for
+ incorporation into a dwelling. In determining whether a product is a
+ consumer product, doubtful cases shall be resolved in favor of
+ coverage. For a particular product received by a particular user,
+ "normally used" refers to a typical or common use of that class of
+ product, regardless of the status of the particular user or of the way
+ in which the particular user actually uses, or expects or is expected
+ to use, the product. A product is a consumer product regardless of
+ whether the product has substantial commercial, industrial or
+ non-consumer uses, unless such uses represent the only significant mode
+ of use of the product.
+
+ "Installation Information" for a User Product means any methods,
+ procedures, authorization keys, or other information required to
+ install and execute modified versions of a covered work in that User
+ Product from a modified version of its Corresponding Source. The
+ information must suffice to ensure that the continued functioning of
+ the modified object code is in no case prevented or interfered with
+ solely because modification has been made.
+
+ If you convey an object code work under this section in, or with, or
+ specifically for use in, a User Product, and the conveying occurs as
+ part of a transaction in which the right of possession and use of the
+ User Product is transferred to the recipient in perpetuity or for a
+ fixed term (regardless of how the transaction is characterized), the
+ Corresponding Source conveyed under this section must be accompanied by
+ the Installation Information. But this requirement does not apply if
+ neither you nor any third party retains the ability to install modified
+ object code on the User Product (for example, the work has been
+ installed in ROM).
+
+ The requirement to provide Installation Information does not include a
+ requirement to continue to provide support service, warranty, or
+ updates for a work that has been modified or installed by the
+ recipient, or for the User Product in which it has been modified or
+ installed. Access to a network may be denied when the modification
+ itself materially and adversely affects the operation of the network or
+ violates the rules and protocols for communication across the network.
+
+ Corresponding Source conveyed, and Installation Information provided,
+ in accord with this section must be in a format that is publicly
+ documented (and with an implementation available to the public in
+ source code form), and must require no special password or key for
+ unpacking, reading or copying.
+
+ 7. Additional Terms.
+
+ "Additional permissions" are terms that supplement the terms of this
+ License by making exceptions from one or more of its conditions.
+ Additional permissions that are applicable to the entire Program shall
+ be treated as though they were included in this License, to the extent
+ that they are valid under applicable law. If additional permissions
+ apply only to part of the Program, that part may be used separately
+ under those permissions, but the entire Program remains governed by
+ this License without regard to the additional permissions.
+
+ When you convey a copy of a covered work, you may at your option remove
+ any additional permissions from that copy, or from any part of it.
+ (Additional permissions may be written to require their own removal in
+ certain cases when you modify the work.) You may place additional
+ permissions on material, added by you to a covered work, for which you
+ have or can give appropriate copyright permission.
+
+ Notwithstanding any other provision of this License, for material you
+ add to a covered work, you may (if authorized by the copyright holders
+ of that material) supplement the terms of this License with terms:
+ * a) Disclaiming warranty or limiting liability differently from the
+ terms of sections 15 and 16 of this License; or
+ * b) Requiring preservation of specified reasonable legal notices or
+ author attributions in that material or in the Appropriate Legal
+ Notices displayed by works containing it; or
+ * c) Prohibiting misrepresentation of the origin of that material,
+ or requiring that modified versions of such material be marked in
+ reasonable ways as different from the original version; or
+ * d) Limiting the use for publicity purposes of names of licensors
+ or authors of the material; or
+ * e) Declining to grant rights under trademark law for use of some
+ trade names, trademarks, or service marks; or
+ * f) Requiring indemnification of licensors and authors of that
+ material by anyone who conveys the material (or modified versions
+ of it) with contractual assumptions of liability to the recipient,
+ for any liability that these contractual assumptions directly
+ impose on those licensors and authors.
+
+ All other non-permissive additional terms are considered "further
+ restrictions" within the meaning of section 10. If the Program as you
+ received it, or any part of it, contains a notice stating that it is
+ governed by this License along with a term that is a further
+ restriction, you may remove that term. If a license document contains
+ a further restriction but permits relicensing or conveying under this
+ License, you may add to a covered work material governed by the terms
+ of that license document, provided that the further restriction does
+ not survive such relicensing or conveying.
+
+ If you add terms to a covered work in accord with this section, you
+ must place, in the relevant source files, a statement of the additional
+ terms that apply to those files, or a notice indicating where to find
+ the applicable terms.
+
+ Additional terms, permissive or non-permissive, may be stated in the
+ form of a separately written license, or stated as exceptions; the
+ above requirements apply either way.
+
+ 8. Termination.
+
+ You may not propagate or modify a covered work except as expressly
+ provided under this License. Any attempt otherwise to propagate or
+ modify it is void, and will automatically terminate your rights under
+ this License (including any patent licenses granted under the third
+ paragraph of section 11).
+
+ However, if you cease all violation of this License, then your license
+ from a particular copyright holder is reinstated (a) provisionally,
+ unless and until the copyright holder explicitly and finally terminates
+ your license, and (b) permanently, if the copyright holder fails to
+ notify you of the violation by some reasonable means prior to 60 days
+ after the cessation.
+
+ Moreover, your license from a particular copyright holder is reinstated
+ permanently if the copyright holder notifies you of the violation by
+ some reasonable means, this is the first time you have received notice
+ of violation of this License (for any work) from that copyright holder,
+ and you cure the violation prior to 30 days after your receipt of the
+ notice.
+
+ Termination of your rights under this section does not terminate the
+ licenses of parties who have received copies or rights from you under
+ this License. If your rights have been terminated and not permanently
+ reinstated, you do not qualify to receive new licenses for the same
+ material under section 10.
+
+ 9. Acceptance Not Required for Having Copies.
+
+ You are not required to accept this License in order to receive or run
+ a copy of the Program. Ancillary propagation of a covered work
+ occurring solely as a consequence of using peer-to-peer transmission to
+ receive a copy likewise does not require acceptance. However, nothing
+ other than this License grants you permission to propagate or modify
+ any covered work. These actions infringe copyright if you do not
+ accept this License. Therefore, by modifying or propagating a covered
+ work, you indicate your acceptance of this License to do so.
+
+ 10. Automatic Licensing of Downstream Recipients.
+
+ Each time you convey a covered work, the recipient automatically
+ receives a license from the original licensors, to run, modify and
+ propagate that work, subject to this License. You are not responsible
+ for enforcing compliance by third parties with this License.
+
+ An "entity transaction" is a transaction transferring control of an
+ organization, or substantially all assets of one, or subdividing an
+ organization, or merging organizations. If propagation of a covered
+ work results from an entity transaction, each party to that transaction
+ who receives a copy of the work also receives whatever licenses to the
+ work the party's predecessor in interest had or could give under the
+ previous paragraph, plus a right to possession of the Corresponding
+ Source of the work from the predecessor in interest, if the predecessor
+ has it or can get it with reasonable efforts.
+
+ You may not impose any further restrictions on the exercise of the
+ rights granted or affirmed under this License. For example, you may
+ not impose a license fee, royalty, or other charge for exercise of
+ rights granted under this License, and you may not initiate litigation
+ (including a cross-claim or counterclaim in a lawsuit) alleging that
+ any patent claim is infringed by making, using, selling, offering for
+ sale, or importing the Program or any portion of it.
+
+ 11. Patents.
+
+ A "contributor" is a copyright holder who authorizes use under this
+ License of the Program or a work on which the Program is based. The
+ work thus licensed is called the contributor's "contributor version".
+
+ A contributor's "essential patent claims" are all patent claims owned
+ or controlled by the contributor, whether already acquired or hereafter
+ acquired, that would be infringed by some manner, permitted by this
+ License, of making, using, or selling its contributor version, but do
+ not include claims that would be infringed only as a consequence of
+ further modification of the contributor version. For purposes of this
+ definition, "control" includes the right to grant patent sublicenses in
+ a manner consistent with the requirements of this License.
+
+ Each contributor grants you a non-exclusive, worldwide, royalty-free
+ patent license under the contributor's essential patent claims, to
+ make, use, sell, offer for sale, import and otherwise run, modify and
+ propagate the contents of its contributor version.
+
+ In the following three paragraphs, a "patent license" is any express
+ agreement or commitment, however denominated, not to enforce a patent
+ (such as an express permission to practice a patent or covenant not to
+ sue for patent infringement). To "grant" such a patent license to a
+ party means to make such an agreement or commitment not to enforce a
+ patent against the party.
+
+ If you convey a covered work, knowingly relying on a patent license,
+ and the Corresponding Source of the work is not available for anyone to
+ copy, free of charge and under the terms of this License, through a
+ publicly available network server or other readily accessible means,
+ then you must either (1) cause the Corresponding Source to be so
+ available, or (2) arrange to deprive yourself of the benefit of the
+ patent license for this particular work, or (3) arrange, in a manner
+ consistent with the requirements of this License, to extend the patent
+ license to downstream recipients. "Knowingly relying" means you have
+ actual knowledge that, but for the patent license, your conveying the
+ covered work in a country, or your recipient's use of the covered work
+ in a country, would infringe one or more identifiable patents in that
+ country that you have reason to believe are valid.
+
+ If, pursuant to or in connection with a single transaction or
+ arrangement, you convey, or propagate by procuring conveyance of, a
+ covered work, and grant a patent license to some of the parties
+ receiving the covered work authorizing them to use, propagate, modify
+ or convey a specific copy of the covered work, then the patent license
+ you grant is automatically extended to all recipients of the covered
+ work and works based on it.
+
+ A patent license is "discriminatory" if it does not include within the
+ scope of its coverage, prohibits the exercise of, or is conditioned on
+ the non-exercise of one or more of the rights that are specifically
+ granted under this License. You may not convey a covered work if you
+ are a party to an arrangement with a third party that is in the
+ business of distributing software, under which you make payment to the
+ third party based on the extent of your activity of conveying the work,
+ and under which the third party grants, to any of the parties who would
+ receive the covered work from you, a discriminatory patent license (a)
+ in connection with copies of the covered work conveyed by you (or
+ copies made from those copies), or (b) primarily for and in connection
+ with specific products or compilations that contain the covered work,
+ unless you entered into that arrangement, or that patent license was
+ granted, prior to 28 March 2007.
+
+ Nothing in this License shall be construed as excluding or limiting any
+ implied license or other defenses to infringement that may otherwise be
+ available to you under applicable patent law.
+
+ 12. No Surrender of Others' Freedom.
+
+ If conditions are imposed on you (whether by court order, agreement or
+ otherwise) that contradict the conditions of this License, they do not
+ excuse you from the conditions of this License. If you cannot convey a
+ covered work so as to satisfy simultaneously your obligations under
+ this License and any other pertinent obligations, then as a consequence
+ you may not convey it at all. For example, if you agree to terms that
+ obligate you to collect a royalty for further conveying from those to
+ whom you convey the Program, the only way you could satisfy both those
+ terms and this License would be to refrain entirely from conveying the
+ Program.
+
+ 13. Use with the GNU Affero General Public License.
+
+ Notwithstanding any other provision of this License, you have
+ permission to link or combine any covered work with a work licensed
+ under version 3 of the GNU Affero General Public License into a single
+ combined work, and to convey the resulting work. The terms of this
+ License will continue to apply to the part which is the covered work,
+ but the special requirements of the GNU Affero General Public License,
+ section 13, concerning interaction through a network will apply to the
+ combination as such.
+
+ 14. Revised Versions of this License.
+
+ The Free Software Foundation may publish revised and/or new versions of
+ the GNU General Public License from time to time. Such new versions
+ will be similar in spirit to the present version, but may differ in
+ detail to address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the Program
+ specifies that a certain numbered version of the GNU General Public
+ License "or any later version" applies to it, you have the option of
+ following the terms and conditions either of that numbered version or
+ of any later version published by the Free Software Foundation. If the
+ Program does not specify a version number of the GNU General Public
+ License, you may choose any version ever published by the Free Software
+ Foundation.
+
+ If the Program specifies that a proxy can decide which future versions
+ of the GNU General Public License can be used, that proxy's public
+ statement of acceptance of a version permanently authorizes you to
+ choose that version for the Program.
+
+ Later license versions may give you additional or different
+ permissions. However, no additional obligations are imposed on any
+ author or copyright holder as a result of your choosing to follow a
+ later version.
+
+ 15. Disclaimer of Warranty.
+
+ THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+ APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+ HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
+ WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
+ OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
+ ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. Limitation of Liability.
+
+ IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+ WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR
+ CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+ INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
+ ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
+ NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
+ SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
+ OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
+ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+ 17. Interpretation of Sections 15 and 16.
+
+ If the disclaimer of warranty and limitation of liability provided
+ above cannot be given local legal effect according to their terms,
+ reviewing courts shall apply local law that most closely approximates
+ an absolute waiver of all civil liability in connection with the
+ Program, unless a warranty or assumption of liability accompanies a
+ copy of the Program in return for a fee.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+ possible use to the public, the best way to achieve this is to make it
+ free software which everyone can redistribute and change under these
+ terms.
+
+ To do so, attach the following notices to the program. It is safest to
+ attach them to the start of each source file to most effectively state
+ the exclusion of warranty; and each file should have at least the
+ "copyright" line and a pointer to where the full notice is found.
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+ Also add information on how to contact you by electronic and paper
+ mail.
+
+ If the program does terminal interaction, make it output a short notice
+ like this when it starts in an interactive mode:
+ <program> Copyright (C) <year> <name of author>
+ This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+ The hypothetical commands `show w' and `show c' should show the
+ appropriate parts of the General Public License. Of course, your
+ program's commands might be different; for a GUI interface, you would
+ use an "about box".
+
+ You should also get your employer (if you work as a programmer) or
+ school, if any, to sign a "copyright disclaimer" for the program, if
+ necessary. For more information on this, and how to apply and follow
+ the GNU GPL, see <[6]http://www.gnu.org/licenses/>.
+
+ The GNU General Public License does not permit incorporating your
+ program into proprietary programs. If your program is a subroutine
+ library, you may consider it more useful to permit linking proprietary
+ applications with the library. If this is what you want to do, use the
+ GNU Lesser General Public License instead of this License. But first,
+ please read <[7]http://www.gnu.org/philosophy/why-not-lgpl.html>.
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/depend
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/depend (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/depend 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,7 @@
+P CSWcommon
+P CSWpng
+P CSWxpm
+P CSWzlib
+P CSWstlport
+P CSWxtideh
+P CSWxtidew
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/pkginfo
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/pkginfo (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/pkginfo 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,9 @@
+PKG=CSWxtide
+NAME=xtide - harmonic tide clock and tide predictor
+VERSION=2.10,REV=2008.02.07
+ARCH=sparc
+CATEGORY=application
+CSW_CATEGORY="eng, fun, user"
+VENDOR=http://www.flaterco.com/xtide/ packaged for CSW by C. Jeffery Small
+HOTLINE=http://www.blastwave.org/bugtrack/
+EMAIL=jeff at blastwave.org
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/prototype
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/prototype (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/prototype 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,21 @@
+i pkginfo
+i copyright
+i depend
+d none /opt/csw/share 0755 root bin
+d none /opt/csw/share/man 0755 root bin
+d none /opt/csw/share/man/man1 0755 root bin
+f none /opt/csw/share/man/man1/tide.1 0644 root bin
+f none /opt/csw/share/man/man1/xtide.1 0644 root bin
+d none /opt/csw/share/man/man8 0755 root bin
+f none /opt/csw/share/man/man8/xttpd.8 0644 root bin
+d none /opt/csw/share/xtide 0755 root bin
+f none /opt/csw/share/xtide/copyright 0644 root bin
+f none /opt/csw/share/xtide/xtide.conf.sample 0644 root bin
+d none /opt/csw/bin 0755 root bin
+f none /opt/csw/bin/tide.bin 0755 root bin
+f none /opt/csw/bin/xtide.bin 0755 root bin
+f none /opt/csw/bin/tide 0755 root bin
+f none /opt/csw/bin/xtide 0755 root bin
+d none /opt/csw/sbin 0755 root bin
+f none /opt/csw/sbin/xttpd.bin 0755 root bin
+f none /opt/csw/sbin/xttpd 0755 root bin
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.libtcdConfig
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.libtcdConfig (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.libtcdConfig 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,21 @@
+#! /bin/sh
+###############################################################################
+#
+# FILE: .libtcdConfig
+#
+# DESCRIPTION: Configuration file for the libtcd program. This should be
+# executed from withing the current libtcd build sub-directory
+# as:
+#
+# ../.libtcdConfig
+#
+# NOTES:
+#
+# PACKAGE: CSWlibtcd
+#
+# REVISION: 12-30-07
+#
+###############################################################################
+
+./configure --prefix=/opt/csw --disable-shared \
+ CPPFLAGS="-I/opt/csw/include -I." LDFLAGS="-L/opt/csw/lib -R/opt/csw/lib"
Property changes on: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.libtcdConfig
___________________________________________________________________
Added: svn:executable
+ *
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.tide
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.tide (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.tide 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,28 @@
+#!/bin/sh
+###############################################################################
+#
+# FILE: tide
+#
+# DESCRIPTION: This script is a front-end to the actual tide binary which
+# has been renamed tide.bin. This file is used to set the
+# HFILE_PATH and WVS_DIR environment variables to the proper
+# values for the CSW installation.
+#
+# PACKAGE: CSWxtide [Requires CSWxtideh, CSWxtidew]
+#
+# REVISION: 12-21-07
+#
+###############################################################################
+
+HFILE_PATH="${HFILE_PATH:-/opt/csw/share/xtide/harmonics-free.tcd:/opt/csw/share/xtide/harmonics-nonfree.tcd}"
+WVS_DIR="${WVS_DIR:-/opt/csw/share/xtide/wvs}"
+
+export HFILE_PATH WVS_DIR
+
+if [ -x /opt/csw/bin/tide.bin ] ; then
+ PROG="/opt/csw/bin/tide.bin"
+else
+ PROG="tide.bin"
+fi
+
+exec ${PROG} $*
Property changes on: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.tide
___________________________________________________________________
Added: svn:executable
+ *
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtide
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtide (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtide 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,28 @@
+#!/bin/sh
+###############################################################################
+#
+# FILE: xtide
+#
+# DESCRIPTION: This script is a front-end to the actual xtide binary which
+# has been renamed xtide.bin. This file is used to set the
+# HFILE_PATH and WVS_DIR environment variables to the proper
+# values for the CSW installation.
+#
+# PACKAGE: CSWxtide [Requires CSWxtideh, CSWxtidew]
+#
+# REVISION: 12-21-07
+#
+###############################################################################
+
+HFILE_PATH="${HFILE_PATH:-/opt/csw/share/xtide/harmonics-free.tcd:/opt/csw/share/xtide/harmonics-nonfree.tcd}"
+WVS_DIR="${WVS_DIR:-/opt/csw/share/xtide/wvs}"
+
+export HFILE_PATH WVS_DIR
+
+if [ -x /opt/csw/bin/xtide.bin ] ; then
+ PROG="/opt/csw/bin/xtide.bin"
+else
+ PROG="xtide.bin"
+fi
+
+exec ${PROG} $*
Property changes on: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtide
___________________________________________________________________
Added: svn:executable
+ *
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,23 @@
+#! /bin/sh
+###############################################################################
+#
+# FILE: .xtideConfig
+#
+# DESCRIPTION: Configuration file for the xtide program. This should be
+# executed from withing the current xtide build sub-directory
+# as:
+#
+# ../.xtideConfig
+#
+# NOTE: *** THIS IS ONLY FOR USE WITH SUN'S cc/CC COMPILERS! ***
+# *** USE ../.xtideConfig-gcc when using GNU COMPILERS! ***
+#
+# PACKAGE: CSWxtide
+#
+# REVISION: 12-30-07
+#
+###############################################################################
+
+./configure --prefix=/opt/csw \
+ CPPFLAGS="-I/opt/csw/include -I." \
+ LDFLAGS="-R/opt/csw/lib -L/opt/csw/lib -Llibtcd"
Property changes on: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig
___________________________________________________________________
Added: svn:executable
+ *
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig-gcc
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig-gcc (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig-gcc 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,23 @@
+#! /bin/sh
+###############################################################################
+#
+# FILE: .xtideConfig-gcc
+#
+# DESCRIPTION: Configuration file for the xtide program. This should be
+# executed from withing the current xtide build sub-directory
+# as:
+#
+# ../.xtideConfig-gcc
+#
+# NOTE: *** THIS IS ONLY FOR USE WITH THE GNU gcc/g++ COMPILERS! ***
+# *** Use ../.xtideConfig when using SUN'S COMPILERS! ***
+#
+# PACKAGE: CSWxtide
+#
+# REVISION: 12-30-07
+#
+###############################################################################
+
+./configure --prefix=/opt/csw \
+ CPPFLAGS="-I/opt/csw/include -I." \
+ LDFLAGS="-R/opt/csw/lib -L/opt/csw/lib -R/opt/csw/gcc3/lib -L/opt/csw/gcc3/lib -Llibtcd"
Property changes on: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideConfig-gcc
___________________________________________________________________
Added: svn:executable
+ *
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideMake.mods
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideMake.mods (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xtideMake.mods 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,61 @@
+###############################################################################
+#
+# FILE: .xtideMake.mods
+#
+# DESCRIPTION: These are the pre-configure modifications for the xtide
+# Makefile.in file.
+#
+# PACKAGE: CSWxtide
+#
+# REVISION: 02-05-08
+#
+# NOTES: * This relies on the CJSA version of install.
+#
+# * Just pick up everything below and move it into the
+# Makefile.in file, replacing the default install target
+# located there.
+#
+###############################################################################
+
+#----------------------------------------------------------------------------
+# Start of install target for Blastwave
+#----------------------------------------------------------------------------
+BINDIR = $(DESTDIR)/opt/csw/bin
+SBINDIR = $(DESTDIR)/opt/csw/sbin
+LIBDIR = $(DESTDIR)/opt/csw/share/xtide
+MANDIR = $(DESTDIR)/opt/csw/man
+
+install: inst-prog inst-lib inst-man
+
+inst-prog: inst-dirs tide xtide xttpd ../.tide ../.xtide ../.xttpd
+ install -s -o root -g bin -m 755 tide $(BINDIR)/tide.bin
+ install -s -o root -g bin -m 755 xtide $(BINDIR)/xtide.bin
+ install -s -o root -g bin -m 755 xttpd $(SBINDIR)/xttpd.bin
+ install -c -o root -g bin -m 755 ../.tide $(BINDIR)/tide
+ install -c -o root -g bin -m 755 ../.xtide $(BINDIR)/xtide
+ install -c -o root -g bin -m 755 ../.xttpd $(SBINDIR)/xttpd
+
+inst-lib: inst-dirs ../../copyright
+ install -c -o root -g bin -m 644 ../../copyright $(LIBDIR)
+ echo "/opt/csw/share/xtide/harmonics.tcd" > $(LIBDIR)/xtide.conf.sample
+ echo "/opt/csw/share/xtide/wvs/" >> $(LIBDIR)/xtide.conf.sample
+
+inst-man: inst-dirs
+ @for i in *.1 ; do \
+ echo "installing $$i" ; \
+ install -o root -g bin -m 644 $$i $(MANDIR)/man1 ; \
+ done
+ @for i in *.8 ; do \
+ echo "installing $$i" ; \
+ install -o root -g bin -m 644 $$i $(MANDIR)/man8 ; \
+ done
+
+inst-dirs:
+ install -d -o root -g bin -m 755 $(BINDIR)
+ install -d -o root -g bin -m 755 $(SBINDIR)
+ install -d -o root -g bin -m 755 $(LIBDIR)
+ install -d -o root -g bin -m 755 $(MANDIR)/man1
+ install -d -o root -g bin -m 755 $(MANDIR)/man8
+#----------------------------------------------------------------------------
+# End of install target for Blastwave
+#----------------------------------------------------------------------------
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xttpd
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xttpd (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xttpd 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,30 @@
+#!/bin/sh
+###############################################################################
+#
+# FILE: xttpd
+#
+# DESCRIPTION: This script is a front-end to the actual xttpd binary which
+# has been renamed xttpd.bin. This file is used to set the
+# HFILE_PATH and WVS_DIR environment variable to the proper
+# values for the CSW installation.
+#
+# PACKAGE: CSWxtide [Requires CSWxtideh, CSWxtidew]
+#
+# REVISION: 12-21-07
+#
+###############################################################################
+
+HFILE_PATH="${HFILE_PATH:-/opt/csw/share/xtide/harmonics-free.tcd:/opt/csw/share/xtide/harmonics-nonfree.tcd}"
+WVS_DIR="${WVS_DIR:-/opt/csw/share/xtide/wvs}"
+
+export HFILE_PATH WVS_DIR
+
+if [ -x /opt/csw/sbin/xttpd.bin ] ; then
+ PROG="/opt/csw/sbin/xttpd.bin"
+elif [ -x /opt/csw/bin/xttpd.bin ] ; then
+ PROG="/opt/csw/bin/xttpd.bin"
+else
+ PROG="xttpd.bin"
+fi
+
+exec ${PROG} $*
Property changes on: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/.xttpd
___________________________________________________________________
Added: svn:executable
+ *
Added: csw/mgar/pkg/xtide/trunk/legacy/xtide/src/Makefile
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtide/src/Makefile (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtide/src/Makefile 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,101 @@
+###############################################################################
+#
+# FILE: Makefile
+#
+# DESCRIPTION: Control file for the XTIDE src directory
+#
+# PACKAGE: CSWxtide
+#
+# REVISION: 02-05-08
+#
+# NOTES: * Set the XVER variable to the current xtide v ersion number
+# * Set the LVER variable to the current libtcd version number
+#
+# * INSTALL_ROOT controls the location of the installation
+#
+# REQMTS: * The CJSA custom install(1M) utility in ${HOME}/bin
+# * The CJSA custom unpak(1M) utility in ${HOME}/bin
+#
+###############################################################################
+
+XVER = 2.10
+LVER = 2.2.3
+
+XSOURCE = xtide-$(XVER).tar.bz2
+LSOURCE = libtcd-$(LVER).tar.bz2
+
+XSAVE = $(XSOURCE)X
+LSAVE = $(LSOURCE)X
+
+XDIR = xtide-$(XVER)
+LDIR = libtcd-$(LVER)
+
+XTAR = xtide-$(XVER).tar
+
+XARCH = $(XTAR).gz
+
+help:
+ @echo "---------------------------------------------------------------"
+ @echo "xtide ver: $(XVER) libtcd ver: $(LVER)"
+ @echo "---------------------------------------------------------------"
+ @echo "make get download xtide and libtcd source code"
+ @echo ""
+ @echo "make extract extract source code from downloaded archives"
+ @echo ""
+ @echo "make links create symbolic links to libtcd directory"
+ @echo ""
+ @echo "make pack tar up and gzip the source code directory"
+ @echo ""
+ @echo "make unpack extract source code from gzipped tarball"
+ @echo ""
+ @echo ""
+ @echo "make clean remove the source code directory"
+ @echo "---------------------------------------------------------------"
+
+
+get: getx getl
+
+getx:
+ wget ftp://ftp.flaterco.com/xtide/$(XSOURCE)
+
+getl:
+ wget ftp://ftp.flaterco.com/xtide/$(LSOURCE)
+
+
+extract: extractx extractl
+
+extractx: $(XSOURCE)
+ unpak $(XSOURCE)
+ mv $(XSOURCE) $(XSAVE)
+
+extractl: $(LSOURCE)
+ unpak $(LSOURCE)
+ mv $(LSOURCE) $(LSAVE)
+
+
+pack pak tar: $(LDIR) $(XDIR)
+ @if [ -f $(XTAR) ] ; then \
+ echo "Cannot pack: $(XTAR) exists." ; \
+ elif [ -f $(XARCH) ] ; then \
+ echo "Cannot pack: $(XARCH) exists." ; \
+ else \
+ tar cvf $(XTAR) $(LDIR) $(XDIR) ; \
+ gzip $(XTAR) ; \
+ fi
+
+unpack unpak: $(XARCH)
+ unpak $(XARCH)
+
+links link:
+ @rm -f xtide*[0-9]/libtcd xtide*[0-9]/tcd.h
+ (cd xtide*[0-9] ; \
+ ln -s ../libtcd*[0-9]/.libs libtcd)
+ (cd xtide*[0-9] ; \
+ ln -s ../libtcd*[0-9]/tcd.h tcd.h)
+
+clean:
+ @if [ ! -f $(XARCH) ] ; then \
+ echo "You must first archive the source with: make pack" ; \
+ else \
+ rm -rf $(XDIR) $(XSOURCE) $(XSAVE) $(LDIR) $(LSOURCE) $(LSAVE) ; \
+ fi
Added: csw/mgar/pkg/xtide/trunk/legacy/xtideh/README
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtideh/README (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtideh/README 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,117 @@
+###############################################################################
+#
+# FILE: README
+#
+# DESCRIPTION: Instructions for creating the XTIDEH package.
+#
+# PACKAGE: CSWxtideh
+#
+# REVISION: 12-21-07
+#
+# NOTES: * This package is architecture independent and will work in
+# conjunction with both the sparc and intel XTIDE packages.
+#
+###############################################################################
+
+-------------------------------------------------------------------------------
+01: Login to the sparc build machine (ra)
+-------------------------------------------------------------------------------
+
+ wr
+
+-------------------------------------------------------------------------------
+02: Update the pkginfo file
+-------------------------------------------------------------------------------
+
+ cd pkgs/xtideh
+ vi pkginfo
+ [edit the version info: Set it to the harmonics data file date]
+
+-------------------------------------------------------------------------------
+03: Download the latest boilerplate and harmonics files
+-------------------------------------------------------------------------------
+
+ cd src
+ vi Makefile [set HARVER to current version (i.e., date)]
+
+ make get
+
+ Or, if the source was already downloaded:
+
+ make unpack
+
+-------------------------------------------------------------------------------
+04: Update copyright file [**** ONLY NEEDS TO BE DONE ONCE PER RELEASE ****]
+-------------------------------------------------------------------------------
+
+ cp boilerplate.txt ${HOME}/pkgs/xtideh/copyright
+
+-------------------------------------------------------------------------------
+05: Install executable in a staging directory
+-------------------------------------------------------------------------------
+
+ rm -rf cswstage
+ stagepkg INSTALL_ROOT=$PWD/cswstage install
+
+-------------------------------------------------------------------------------
+06: Update the prototype file
+-------------------------------------------------------------------------------
+
+ cd cswstage
+ grep '^[df]' prototype | grep -v 'root bin'
+ [check 'f'iles & 'd'irs have owner/group 'root bin']
+ vi prototype (only if necessary)
+ [change all owners/groups to 'root bin']
+ [change file permissions from 0444 to 0644]
+ [change file permissions from 0555 to 0755]
+
+-------------------------------------------------------------------------------
+07: Check changes in prototype from previous release and update file
+-------------------------------------------------------------------------------
+
+ diff ${HOME}/pkgs/xtideh/prototype prototype
+ [if any odd differences, investigate and fix]
+
+ cp prototype ${HOME}/pkgs/xtideh
+
+-------------------------------------------------------------------------------
+08: Create the package xtideh-*-SunOS5.8-all-CSW.pkg.gz
+-------------------------------------------------------------------------------
+
+ cd ${HOME}/pkgs/xtideh
+ createpkg -b ${HOME}/pkgs/xtideh/src/cswstage/opt/csw
+
+ [The package name should follow this format:]
+
+ <name>-<version>[,REV=YYYY.MM.DD]-<OSname><OSrel>-<arch>-CSW.pkg.gz
+
+-------------------------------------------------------------------------------
+09: Clean up
+-------------------------------------------------------------------------------
+
+ cd src
+ make clean
+ make pack
+ make realclean
+
+-------------------------------------------------------------------------------
+10: Copy the new package to the installation area
+-------------------------------------------------------------------------------
+
+ cd pkgs/xtideh
+ cp xtideh-*.pkg.gz /export/medusa/newpkgs
+
+-------------------------------------------------------------------------------
+11: Copy the source code tarball to the holding area
+-------------------------------------------------------------------------------
+
+ cd src
+ cp xtideh-*.gz /export/medusa/src
+
+-------------------------------------------------------------------------------
+12: Notify package administrator
+-------------------------------------------------------------------------------
+
+ * Email phil at bolthole.com (Philip Brown) describing the update
+
+------------------------------------------------------------------------------
Added: csw/mgar/pkg/xtide/trunk/legacy/xtideh/copyright
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtideh/copyright (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtideh/copyright 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,543 @@
+# $Id: harmonics_boilerplate.txt 2899 2007-12-28 23:10:40Z flaterco $
+#
+# Definitions and constants for XTide
+#
+# NOTE: This file should not be used as-is to provide a constituent
+# set to harmgen because it contains multiple constituents with the
+# same frequency. A better constituent set is included in the harmgen
+# distribution (see the README).
+#
+#
+# ********* NOT FOR NAVIGATION ********
+#
+# *** DO NOT RELY ON THIS DATA FILE FOR DECISIONS THAT CAN RESULT IN ***
+# *** HARM TO ANYONE OR ANYTHING. ***
+#
+# Highly trustworthy tide predictions cannot be achieved on a zero
+# budget. If you need guaranteed results, don't use these data!
+# Contact the tide authority for your region (NOAA in the U.S.).
+#
+# This data file is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without any warranty that its use will NOT
+# INFRINGE ANY RIGHTS, and without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# WHOEVER CHOOSES TO REDISTRIBUTE THESE DATA ASSUMES ALL LIABILITY
+# ASSOCIATED THEREWITH. NEITHER DAVID FLATER NOR ANYONE ELSE INVOLVED
+# SHALL BE LIABLE PERSONALLY OR OTHERWISE FOR ANY LOSSES THAT THE
+# REDISTRIBUTOR MIGHT SUFFER AS A CONSEQUENCE OF ANY CLAIMS, BOGUS OR
+# OTHERWISE, THAT ARE MADE TO THESE DATA.
+#
+#
+# --- Notes to contributors ---
+#
+# After getting legal threats from the U.K. Hydrographic Office, I am
+# no longer willing to accept any data without an explicit statement
+# from the copyright owner or eminent authority either granting
+# permission for non-commercial use with XTide or explaining that such
+# permission is not required. The absence of a copyright notice is
+# not sufficient; however, a blanket permission for non-commercial use
+# is sufficient.
+#
+# For more technical reasons, I am not prepared to accept data under
+# conditions that require me to track uses of the data, to limit the
+# uses of the data to a particular time period, or to verify that
+# every user has read the legalese. XTide has many different
+# interfaces by which users can obtain results, and such requirements
+# are impossible to implement in a reasonable and consistent fashion
+# across all interfaces. For a reasonable compromise, see what was
+# done for the POL data: a reference to legalese is included in the
+# location name field.
+#
+#
+# --- Copyright statements ---
+#
+# United States: Data published by the U.S. government is by law
+# non-proprietary. Stations in the U.S., territories of the U.S.,
+# commonwealths associated with the U.S., and countries with a Compact
+# of Free Association with the U.S. have been included. A few other
+# stations available from the NOS web site have been dropped.
+#
+# Notice available on the NOS web site at
+# http://tidesandcurrents.noaa.gov/disclaimers.html as of
+# 2007-05-30:
+#
+# The information on government servers are in the public domain,
+# unless specifically annotated otherwise, and may be used freely by
+# the public. Before using information obtained from this server,
+# special attention should be given to the date and time of the data
+# and products being displayed. This information shall not be
+# modified in content and then presented as official government
+# material.
+#
+# The user assumes the entire risk related to its use of these
+# data. NOS is providing these data "as is," and NOS disclaims any
+# and all warranties, whether express or implied, including (without
+# limitation) any implied warranties of merchantability or fitness
+# for a particular purpose. In no event will NOS be liable to you or
+# to any third party for any direct, indirect, incidental,
+# consequential, special or exemplary damages or lost profit
+# resulting from any use or misuse of this data.
+#
+# NOS requests that attribution be given whenever NOS material is
+# reproduced and re-disseminated. Pursuant to 17 U.S.C. 403, third
+# parties producing copyrighted (compilation) works consisting
+# predominantly of material created by Federal Government employees
+# are encouraged to provide notice with such work(s) identifying the
+# U.S. Government material incorporated and stating that such
+# material is not subject to copyright protection.
+#
+# Canada: The harmonic constants used to perform tide predictions for
+# locations in Canada are derived from sea level data made available
+# by Marine Environmental Data Services, Fisheries and Oceans Canada,
+# for public, non-commercial use. The predictions are not the same as
+# those computed by the Canadian Hydrographic Service, which uses its
+# own sets of harmonic constants.
+#
+# Copyright notice for the sea level data at
+# http://www.meds-sdmm.dfo-mpo.gc.ca/meds/About_MEDS/copyright_e.htm:
+#
+# Non-commercial Reproduction
+#
+# Information on this site has been posted with the intent that it be
+# readily available for personal and public non-commercial use and may
+# be reproduced, in part or in whole and by any means, without charge
+# or further permission from the Department of Fisheries and Oceans
+# Canada. We ask only that:
+#
+# * Users exercise due diligence in ensuring the accuracy of the
+# materials reproduced;
+#
+# * The Department of Fisheries and Oceans Canada be identified as
+# the source department; and,
+#
+# * The reproduction is not represented as an official version of
+# the materials reproduced, nor as having been made, in
+# affiliation with or with the endorsement of the Department of
+# Fisheries and Oceans Canada.
+#
+# Netherlands: The Netherlands data was contributed directly by Koos
+# Doekes of the Rijkswaterstaat RIKZ/ZDI, who grants permission by his
+# own authority:
+#
+# Herewith I grant permission for non-commercial use
+# of all harmonic constants for the Netherlands by
+# users of Xtide or Xtide-based products.
+#
+# This covers the use of the constants for Dutch
+# ports in the Xtide-database by designers
+# of web applications, and the use in commercial
+# tidal prediction software in which the constants
+# themselves are not stored - i.e. the user has
+# to copy them from the Xtide-database himself.
+#
+# It does NOT cover the use in commercial software
+# in which the constants are incorporated, which is
+# considered commercial use of the constants here.
+# Any request for permission of use of Dutch constants
+# in software of this kind should be redirected to
+# RIKZ.
+#
+# Germany: The Germany data was contributed directly by Wolfgang
+# Lange of the Bundesamt fuer Seeschifffahrt und Hydrographie (BSH),
+# who grants permission by his own authority:
+#
+# As long as you make your software using these tidal data
+# freely available, I grant permission for non-commercial use
+# of the harmonic constants for the 12 reference stations at
+# the german North Sea coast on the same conditions and rules
+# layed down in the letter from Koos Doekes, RIKZ/ZDI,
+# concerning the Netherlands harmonic constituents.
+#
+# UK: Received 2003-11-15 DWF. See also http://www.flaterco.com/pol.html.
+#
+# Proudman Oceanographic Laboratory
+# Natural Environment Research Council
+#
+# Bidston Observatory
+# Bidston Hill
+# Prenton
+# Merseyside
+# CH43 7RA
+# United Kingdom
+# David Flater
+# 13320 Country Ridge Drive Tel +44 (0) 151 653 8633
+# Germantown, MD 20874 Fax +44 (0) 151 653 6269
+# United States of America www.pol.ac.uk
+#
+#
+# 07 November 2003
+#
+# Dear David,
+#
+# This letter is to confirm that we are happy for you to download the
+# sea level data from the British Oceanographic Data Centre website and
+# use this in the generation of harmonic constants using the HarmGen
+# software. However there are a couple of things that we would politely
+# ask that you do.
+#
+# 1. Limit the number of harmonic constants you use in the software to
+# a maximum of 40 for any port. This should easily be enough to create
+# very accurate tidal predictions as for nearly all locations, any
+# harmonics left out (i.e. the 41st most significant constants onwards)
+# will have amplitudes of the order of a centimetre.
+#
+# 2. State that the data is derived from sea level data obtained from
+# the British Oceanographic Data Centre based at the Proudman
+# Oceanographic Laboratory, Liverpool.
+#
+# 3. Make it clear that the predictions however are not the same as
+# those computed by the Proudman Oceanographic Laboratory which uses its
+# own sets of harmonic constants.
+#
+# 4. Continue to make your software using the data freely available.
+# Please inform us if you intend to produce a software product that you
+# will be making a charge for.
+#
+# I hope these conditions are acceptable to you and it will be good to
+# see the UK back on the map.
+#
+# Yours sincerely,
+# Colin Bell
+# Head of Applications Group
+#
+#
+# Changelog
+# ---------
+#
+# 2007-12-28
+#
+# Imported NOS data from snapshot 2007-12-17.
+#
+# Reapplied the meridian fixes for Albany and Coyote Point Marina.
+# Coordinates of I-526 bridge were fixed upstream.
+#
+# A comparison of all reference stations versus the 2008 tide tables
+# published on the web revealed discrepancies for Anchorage, AK and Port
+# O'Connor, TX. The Anchorage discrepancies are small enough to be
+# explained by a data update; however, the Port O'Connor discrepancies are
+# major and are not helped by the meridian fix that worked for Albany and
+# Coyote Point Marina. Local observations are required to determine whether
+# the Port O'Connor predictions are any good at all. This is complicated by
+# the fact that it is a diurnal station with small tidal range, making
+# eyewitness confirmation that much more unreliable. Subordinate stations
+# depending on these reference stations will also fail to match the
+# published tables.
+#
+#
+# 2007-11-22
+#
+# To facilitate compliance with Linux distribution packaging policies
+# and to draw more attention to the acceptable use restriction on
+# non-U.S. data, the "free" and "nonfree" data are now being exported
+# to separate TCD files. At this time, all "free" data are public
+# domain and all "nonfree" data are merely restricted to
+# non-commercial use only.
+#
+# Replaced the data set for Harwich, England with one calculated from
+# a longer time series. Proudman still does not yet publish
+# predictions for this location.
+#
+#
+# 2007-03-18
+#
+# Updated approximated MLLW datums with improved estimates.
+#
+# Put IGNORE HEIGHTS in the legalese fields of the 14 subordinate
+# stations where NOS zeroed out the heights.
+#
+#
+# 2007-02-22
+#
+# Applied renamings as updated and improved by Walt Bilofsky (thanks
+# Walt).
+#
+#
+# 2007-02-11
+#
+# Interim release, without renamings.
+#
+# Imported NOS data from snapshot 2007-02-07.
+#
+# (9414449) Coyote Point Marina, San Francisco Bay, CA: corrected meridian.
+# (Data claimed UTC, was UTC-8)
+# (8518995) Albany, Hudson River, NY: corrected meridian.
+# (Data claimed UTC, was UTC-5)
+# I-526 bridge, Ashley River, South Carolina: fixed longitude.
+# Pascagoula, Mississippi Sound, Mississippi latitude was fixed upstream.
+#
+# In progress: renamings.
+#
+# Since there were two reference stations with incorrect meridians
+# (one that was reported last time and one that was just discovered),
+# it is reasonable to expect that there will be more.
+#
+#
+# 2006-07-08
+#
+# Coyote Point Marina, San Francisco Bay, California: corrected meridian.
+# Delaware City, Delaware River, Delweare: fixed typo in name.
+# Pascagoula, Mississippi Sound, Mississippi: fixed latitude.
+# I-526 bridge, Ashley River, South Carolina: fixed longitude.
+#
+#
+# 2006-03-05
+#
+# Installed renamings from AH for the 102 stations that lacked states.
+#
+#
+# 2006-02-05
+#
+# Refreshed U.S. data from NOS web site (snapshot 2006-01-04). AH has
+# dealt with new and modified station names to maintain the naming
+# convention installed 2005-11-27. Still to be fixed is a list of
+# stations that do not include their state in their name. Most or all
+# of those have been that way since November. They didn't stick out
+# much until an unrelated Harmbase query happened to group them
+# together.
+#
+# An e-mail exchange with Todd Ehret of NOS CO-OPS this time led me to
+# believe that the UTC constants for the Alaskan reference stations
+# with weird time zones should be correct, so I have retained them. A
+# survey of affected subordinate stations shows that most should be
+# correct if their reference station is correct (they all use the same
+# one). Most doubtful are the six subordinate stations on
+# St. Lawrence Island. I do not even have reliable intelligence on
+# what the de facto time zone of St. Lawrence Island is. It was not
+# mentioned in the statute that defines U.S. time zones.
+#
+#
+# 2005-11-27
+#
+# Installed renamings from August Hahn to achieve something like the
+# naming convention previously followed in legacy data. These
+# renamings will be maintained through subsequent updates if the churn
+# is not too bad.
+#
+#
+# 2005-09-05
+#
+# Generated and installed harmonic constants for 49 Canadian stations
+# using up to 10 years of hourly data (the maximum permitted download)
+# from Marine Environmental Data Services (MEDS), Fisheries and Oceans
+# Canada.
+#
+# MEDS publishes water level data for 962 stations. Of those, only 92
+# are currently active. Of those 92, 43 are non-tidal, being located
+# on or near the great lakes.
+#
+#
+# 2005-06-05
+#
+# Generated and installed fresh harmonic constants for U.K. stations
+# using all available data for the 19 year epoch from 1986 to 2004.
+# Quality assurance information is available at
+# ftp://ftp.flaterco.com/xtide/harmonics-dwf-2005-06-05-QA.txt
+#
+# Station Harwich, England is new with only 8 months of data.
+# Authoritative predictions for this station are not yet available for
+# comparison.
+#
+#
+# 2005-01-20
+#
+# Deleted the following Alaskan reference stations, which were
+# rendered incorrect by technical difficulties confirmed by Todd Ehret
+# of NOS CO-OPS, and all dependent sub stations. They may return
+# corrected in future revisions.
+#
+# - 9460150 Attu, Massacre Bay
+# - 9465261 Clarks Point, Nushagak Bay
+# - 9468132 St. Michael, Norton Sound
+# - 9497649 Prudhoe Bay #2
+# - 9497778 Cross Island
+#
+# Also deleted the following station which is listed as superseded.
+#
+# - 9497652 Prudhoe Bay, Dock #1
+#
+#
+# 2004-12-10
+#
+# Refreshed all NOS data from NOS web site.
+#
+#
+# 2004-10-18
+#
+# No data changes -- just resyncing and renaming all the different
+# editions of the database.
+# harmonics-dwf-2004-10-18-v2.tcd Built with libtcd 2.0
+# harmonics-dwf-2004-10-18-v1.tcd Built with libtcd 1.100
+# harmonics-dwf-2004-10-18.sql Postgres 7.4.2
+# harmonics-dwf-2004-10-18-dump txt/xml restored from -v2.tcd
+# harmonics-dwf-2004-10-18-compat txt/xml years 1970-2037 only
+#
+#
+# 2004-10-08 DWF
+#
+# Updated RIKZ/MII references to new name, RIKZ/ZDI.
+#
+#
+# 2004-10-05 DWF
+#
+# Rebuilt using libtcd 1.99, which corrects a problem where
+# constituents with zero phases were being dropped. The affected
+# reference stations are Delfzijl, Netherlands; The Battery, New York
+# Harbor, NY; and South Pass, LA.
+#
+#
+# 2004-09-14 DWF
+#
+# Imported subordinate stations available from the NOS web site as of
+# 2004-09-09. Compare against
+# http://co-ops.nos.noaa.gov/tide_pred.html. Some stations will
+# disagree moderately because the reference stations were updated and
+# don't match the published tables.
+#
+# The smattering of sub stations in non-U.S. territory was suppressed.
+#
+# There are time zone problems in Alaska. The LST used by the NOS for
+# stations in Alaska does not always match the local statutory time
+# zone (which I have followed). For reference stations, the problem
+# was detectable and correctable because the constants were available
+# calibrated with UTC as well as LST. But for the sub stations, it is
+# impossible to tell whether a disagreement with NOS predictions
+# results from a disagreement about time zone, incorrect calibration,
+# or both.
+#
+# A few names suffixed by (A) and (B) reflect sub stations on the NOS
+# web site with the same names and close coordinates, where it is far
+# from obvious why there are two of them. Other name clashes were
+# resolved by disambiguation.
+#
+# (Nit) Corrected months_on_station for German ref stations from 13 to
+# 12. (It's a time zone / rounding issue, on list to be fixed.)
+#
+#
+# 2004-09-07c DWF
+#
+# Put the following three stations on Eastern time (they were calibrated
+# to Central time on the NOS web site):
+# Johns Island, Chassahowitzka Bay, FL
+# Chassahowitzka River, FL
+# Crystal River, Kings Bay, FL
+#
+#
+# 2004-09-07b DWF
+#
+# Corrected heuristic for Alaskan time zones. A few stations in the
+# Aleutians were affected.
+#
+#
+# 2004-09-07 DWF
+#
+# Added notes for stations in Alaska where the LST used by NOS does not
+# match the apparent statutory time zone. Presently these notes just
+# get attached to the comments field in the TCD file, but the next major
+# revision to the TCD format should enable XTide to display them more
+# prominently.
+#
+#
+# 2004-09-01 DWF
+#
+# Most reference stations available from the NOS web site as of
+# 2004-08-26 have been imported. Compare against
+# http://co-ops.nos.noaa.gov/tide_pred.html.
+#
+# MLLW benchmarks were not available for all stations. For stations
+# where a MLLW datum was not available, the datum has been set to LAT.
+#
+# I know there are typos in the location names.
+#
+# Currents are not available at this time. According to Mr. Ehret, they
+# will become available when the new CO-OPS currents database is
+# complete.
+#
+# The following stations, which are located in jurisdictions that are
+# neither territories of the U.S., nor commonwealths associated with the
+# U.S., nor countries with a Compact of Free Association with the U.S.,
+# have been dropped. Their data are distributed without legalese from
+# the NOS web site; however, that does not necessarily mean that anyone
+# other than the NOS has permission from the respective governments to
+# use or redistribute the data. This may seem paranoid, but the
+# situation with the U.K. data that were pulled in 2001 was very
+# similar.
+#
+# Apia, Samoa
+# Bermuda Esso Pier, St. Georges Island, Bermuda
+# Fare Ute Point, Papeete Harbor, French Polynesia
+# La Uni\xF3n, El Salvador
+# Madero, Tampico Harbor, Tamaulipas, Mexico
+# Puerto Corinto, Nicaragua
+# Puerto Cort\xE9s, Honduras
+# Puerto Quetzal (San Jose), Guatemala
+# Settlement Point, Grand Bahama I., Bahamas
+# Suva Harbor, Suva, Fiji
+#
+#
+# 2004-08-19 DWF
+#
+# This is an interim release as I am starting over from scratch using
+# Harmbase2. All legacy data have been dumped.
+#
+# All U.S. data are temporarily down; the 2004-08-09 version of this
+# file remains usable for those. Mr. Ehret has indicated that there
+# would be fees involved in obtaining harmonic constants and offsets
+# in the format previously received, so I am abandoning all that and
+# gearing up to scrape data off of the web. According to Mr. Ehret,
+# the set of locations on the web site is a superset of those used in
+# published prediction tables. The discrepancies that occur are
+# because the harmonic constants on the web are updated continuously
+# while the harmonic constants used for the published tables are fixed
+# in advance. Thus there seems little to be lost by replacing all of
+# the legacy data with a snapshot of the web data.
+#
+# Data presently included:
+#
+# Netherlands reference stations computed from hourly levels 1999
+# through 2002, as received from Koos Doekes on 2004-02-03. Compare
+# against http://www.getij.nl/engels/.
+#
+# German reference stations computed using Harmgen from year 2001
+# observations sent by Wolfgang Lange on 2004-08-19. The datums are
+# adjusted to LAT. Compare against
+# http://www.bsh.de/en/Marine%20data/Forecasts/Tides/index.jsp. (The
+# web site is still using the MLWS datum, so the heights will disagree
+# strongly until the web site is updated. However, even adjusting for
+# that, the agreement is not as good as could be hoped. The BSH
+# predictions are made using a non-harmonic method, so some
+# discrepancies are inevitable.)
+#
+# German subordinate stations as sent by Wolfgang Lange on 2004-08-10.
+#
+# U.K. reference stations computed using Harmgen from at least four
+# years of observations ending 2002-12-31, as downloaded from the BODC
+# web site 2003-11. Compare against http://www.pol.ac.uk/ntslf/tides/.
+#
+#
+# 2004-08-09 DWF
+#
+# harmonics-dwf is a new database that emphasizes responsiveness to
+# updates and traceability to authoritative sources instead of maximum
+# coverage of locations and historical predictions. All data known to
+# be old and expired and all data for which no source of updates
+# exists have been purged. This will orphan many users who have been
+# getting good results from old data. For these, please continue to
+# use RMK's database.
+#
+# harmonics-dwf now contains:
+# - U.S. reference stations provided by Todd Ehret of NOAA circa
+# 2004-02-04.
+# - Netherlands reference stations provided by Koos Doekes of the
+# Rijkswaterstaat RIKZ/ZDI (then RIKZ/MII) on 2004-02-03.
+# - U.K. reference stations derived by Harmgen from BODC data,
+# 2003-11.
+# - The most recent data for other U.S. reference stations that
+# were in RMK data rev. 2004-04-16 23:30 but not included in
+# the distribution from Todd Ehret.
+#
+# All sub stations are gone temporarily while I update my software to
+# import the sub station data sent by Todd Ehret in February. I will
+# also be contacting Mr. Ehret to see if I can obtain a complete dump
+# of all stations in current use so that I can build a legacy-free
+# database.
Added: csw/mgar/pkg/xtide/trunk/legacy/xtideh/depend
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtideh/depend (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtideh/depend 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1 @@
+P CSWcommon
Added: csw/mgar/pkg/xtide/trunk/legacy/xtideh/pkginfo
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtideh/pkginfo (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtideh/pkginfo 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,9 @@
+PKG=CSWxtideh
+NAME=xtideh - harmonics data files for xtide
+VERSION=07.12.28,REV=2008.02.05
+ARCH=all
+CATEGORY=application
+CSW_CATEGORY="eng, fun, lib"
+VENDOR=http://www.flaterco.com/xtide/ packaged for CSW by C. Jeffery Small
+HOTLINE=http://www.blastwave.org/bugtrack/
+EMAIL=jeff at blastwave.org
Added: csw/mgar/pkg/xtide/trunk/legacy/xtideh/prototype
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtideh/prototype (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtideh/prototype 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,8 @@
+i pkginfo
+i copyright
+i depend
+d none share 0755 root bin
+d none share/xtide 0755 root bin
+f none share/xtide/boilerplate.txt 0644 root bin
+f none share/xtide/harmonics-free.tcd 0644 root bin
+f none share/xtide/harmonics-nonfree.tcd 0644 root bin
Added: csw/mgar/pkg/xtide/trunk/legacy/xtideh/src/Makefile
===================================================================
--- csw/mgar/pkg/xtide/trunk/legacy/xtideh/src/Makefile (rev 0)
+++ csw/mgar/pkg/xtide/trunk/legacy/xtideh/src/Makefile 2009-01-30 10:44:13 UTC (rev 2937)
@@ -0,0 +1,105 @@
+###############################################################################
+#
+# FILE: Makefile
+#
+# DESCRIPTION: Control file for the XTIDEH src directory.
+# These are the harmonics data files used by the XTIDE package.
+#
+# PACKAGE: CSWxtideh
+#
+# REVISION: 02-05-08
+#
+# NOTES: * Set the HARVER variable to the current harmonics file date.
+#
+# * Am using CJSA custom install(1M) utility in ${HOME}/bin.
+#
+# * INSTALL_ROOT controls the location of the installation.
+#
+# * Files at: http://www.flaterco.com/xtide/files.html
+#
+# * Version 1 harmonics used with xtide <= 2.7
+# Version 2 harmonics used with xtide >= 2.8
+#
+# REQMTS: * The CJSA custom install(1M) utility in ${HOME}/bin
+# * The CJSA custom unpak(1M) utility in ${HOME}/bin
+#
+###############################################################################
+
+BOILER = harmonics_boilerplate.txt
+
+HARVER = 20071228
+
+HARMON1 = harmonics-dwf-$(HARVER)-free.tcd
+HARMON2 = harmonics-dwf-$(HARVER)-nonfree.tcd
+
+HAR1 = harmonics-free.tcd
+HAR2 = harmonics-nonfree.tcd
+
+HARTAR = xtideh-$(HARVER).tar
+
+HARCH = $(HARTAR).gz
+
+LIBDIR = $(INSTALL_ROOT)/opt/csw/share/xtide
+
+help:
+ @echo "---------------------------------------------------------------"
+ @echo "Harmonics Ver: $(HARVER)"
+ @echo "---------------------------------------------------------------"
+ @echo "make get download the harmonics.tcd & boilerplate files"
+ @echo ""
+ @echo "make install install the harmonics.tcd file"
+ @echo ""
+ @echo "make pack tar up and gzip the harmonics source code"
+ @echo ""
+ @echo "make unpack extract source code from gzipped tarball"
+ @echo ""
+ @echo "make clean remove previous copies of files and cswstage"
+ @echo ""
+ @echo "make realclean clean + rm harmonics.tcd & boilerplate files"
+ @echo "---------------------------------------------------------------"
+
+
+get: get_bp get_hf
+
+get_bp:
+ @rm -rf boilerplate.txt.PREV harmonics.*.PREV
+ @if [ -f boilerplate.txt ] ; then \
+ mv boilerplate.txt boilerplate.txt.PREV ; \
+ fi
+ wget http://www.flaterco.com/xtide/$(BOILER)
+ mv $(BOILER) boilerplate.txt
+
+get_hf:
+ @if [ -f harmonics.tcd ] ; then \
+ mv harmonics.tcd harmonics.tcd.PREV ; \
+ fi
+ wget ftp://ftp.flaterco.com/xtide/$(HARMON1).bz2
+ bunzip2 $(HARMON1).bz2
+ wget ftp://ftp.flaterco.com/xtide/$(HARMON2).bz2
+ bunzip2 $(HARMON2).bz2
+
+
+install: boilerplate.txt $(HARMON1) $(HARMON2)
+ install -d -o root -g bin -m 755 $(LIBDIR)
@@ Diff output truncated at 100000 characters. @@
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the devel
mailing list