[csw-devel] SF.net SVN: gar:[5438] csw/mgar/pkg/etckeeper/trunk

bdwalton at users.sourceforge.net bdwalton at users.sourceforge.net
Tue Jun 30 15:35:06 CEST 2009


Revision: 5438
          http://gar.svn.sourceforge.net/gar/?rev=5438&view=rev
Author:   bdwalton
Date:     2009-06-30 13:35:06 +0000 (Tue, 30 Jun 2009)

Log Message:
-----------
final version of autoconf/automake stuff (i think)

Modified Paths:
--------------
    csw/mgar/pkg/etckeeper/trunk/checksums
    csw/mgar/pkg/etckeeper/trunk/files/autoconf.patch

Modified: csw/mgar/pkg/etckeeper/trunk/checksums
===================================================================
--- csw/mgar/pkg/etckeeper/trunk/checksums	2009-06-30 13:25:24 UTC (rev 5437)
+++ csw/mgar/pkg/etckeeper/trunk/checksums	2009-06-30 13:35:06 UTC (rev 5438)
@@ -1 +1 @@
-f916350f19bd0af0907fb6c7ea580cba  download/autoconf.patch
+bdf12710b4d8ee58ce36ebdfb9e95978  download/autoconf.patch

Modified: csw/mgar/pkg/etckeeper/trunk/files/autoconf.patch
===================================================================
--- csw/mgar/pkg/etckeeper/trunk/files/autoconf.patch	2009-06-30 13:25:24 UTC (rev 5437)
+++ csw/mgar/pkg/etckeeper/trunk/files/autoconf.patch	2009-06-30 13:35:06 UTC (rev 5438)
@@ -1,9 +1,9 @@
 diff --git a/.gitignore b/.gitignore
 new file mode 100644
-index 0000000..0ca708e
+index 0000000..a831c89
 --- /dev/null
 +++ b/.gitignore
-@@ -0,0 +1,7 @@
+@@ -0,0 +1,10 @@
 +configure
 +autom4te.cache
 +Makefile
@@ -11,6 +11,9 @@
 +config.status
 +etckeeper
 +etckeeper.conf
++Makefile
++Makefile.in
++etckeeper.8
 diff --git a/Makefile b/Makefile
 deleted file mode 100644
 index b2d6565..0000000
@@ -155,6 +158,601 @@
 +
 +install-data-local: $(KEEPERSCRIPTS) high-$(HIGHLEVEL) low-$(LOWLEVEL) $(OPTS)
 +
+diff --git a/aclocal.m4 b/aclocal.m4
+new file mode 100644
+index 0000000..9d33cbe
+--- /dev/null
++++ b/aclocal.m4
+@@ -0,0 +1,589 @@
++# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++m4_ifndef([AC_AUTOCONF_VERSION],
++  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
++[m4_warning([this file was generated for autoconf 2.63.
++You have another version of autoconf.  It may work, but is not guaranteed to.
++If you have problems, you may need to regenerate the build system entirely.
++To do so, use the procedure documented by the package, typically `autoreconf'.])])
++
++# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++# (This private macro should not be called outside this file.)
++AC_DEFUN([AM_AUTOMAKE_VERSION],
++[am__api_version='1.10'
++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
++dnl require some minimum version.  Point them to the right macro.
++m4_if([$1], [1.10.2], [],
++      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
++])
++
++# _AM_AUTOCONF_VERSION(VERSION)
++# -----------------------------
++# aclocal traces this macro to find the Autoconf version.
++# This is a private macro too.  Using m4_define simplifies
++# the logic in aclocal, which can simply ignore this definition.
++m4_define([_AM_AUTOCONF_VERSION], [])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
++# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++[AM_AUTOMAKE_VERSION([1.10.2])dnl
++m4_ifndef([AC_AUTOCONF_VERSION],
++  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
++
++# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
++
++# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory.  The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run.  This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++#    fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++#    fails if $ac_aux_dir is absolute,
++#    fails when called from a subdirectory in a VPATH build with
++#          a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir.  In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
++#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++#   MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH.  The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++])
++
++# AM_CONDITIONAL                                            -*- Autoconf -*-
++
++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 8
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
++	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])dnl
++AC_SUBST([$1_FALSE])dnl
++_AM_SUBST_NOTMAKE([$1_TRUE])dnl
++_AM_SUBST_NOTMAKE([$1_FALSE])dnl
++if $2; then
++  $1_TRUE=
++  $1_FALSE='#'
++else
++  $1_TRUE='#'
++  $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++  AC_MSG_ERROR([[conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.]])
++fi])])
++
++# Do all the work for Automake.                             -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2008 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 13
++
++# This macro actually does too much.  Some checks are only needed if
++# your package does certain things.  But this isn't really a big deal.
++
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out.  PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition.  After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.60])dnl
++dnl Autoconf wants to disallow AM_ names.  We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++  # is not polluted with repeated "-I."
++  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
++  # test to see if srcdir already configured
++  if test -f $srcdir/config.status; then
++    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++  fi
++fi
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++  if (cygpath --version) >/dev/null 2>/dev/null; then
++    CYGPATH_W='cygpath -w'
++  else
++    CYGPATH_W=echo
++  fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
++  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AM_PROG_INSTALL_SH
++AM_PROG_INSTALL_STRIP
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target.  The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
++              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
++	      		     [_AM_PROG_TAR([v7])])])
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++                  [_AM_DEPENDENCIES(CC)],
++                  [define([AC_PROG_CC],
++                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++                  [_AM_DEPENDENCIES(CXX)],
++                  [define([AC_PROG_CXX],
++                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_OBJC],
++                  [_AM_DEPENDENCIES(OBJC)],
++                  [define([AC_PROG_OBJC],
++                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
++])
++])
++
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated.  The stamp files are numbered to have different names.
++
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_arg=$1
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++  case $_am_header in
++    $_am_arg | $_am_arg:* )
++      break ;;
++    * )
++      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++  esac
++done
++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
++
++# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
++AC_SUBST(install_sh)])
++
++# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# Check whether the underlying file-system supports filenames
++# with a leading dot.  For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++  am__leading_dot=.
++else
++  am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
++
++# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
++
++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 5
++
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++AC_REQUIRE_AUX_FILE([missing])dnl
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++  am_missing_run="$MISSING --run "
++else
++  am_missing_run=
++  AC_MSG_WARN([`missing' script is too old or missing])
++fi
++])
++
++# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_MKDIR_P
++# ---------------
++# Check for `mkdir -p'.
++AC_DEFUN([AM_PROG_MKDIR_P],
++[AC_PREREQ([2.60])dnl
++AC_REQUIRE([AC_PROG_MKDIR_P])dnl
++dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
++dnl while keeping a definition of mkdir_p for backward compatibility.
++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
++dnl Makefile.ins that do not define MKDIR_P, so we do our own
++dnl adjustment using top_builddir (which is defined more often than
++dnl MKDIR_P).
++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
++case $mkdir_p in
++  [[\\/$]]* | ?:[[\\/]]*) ;;
++  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
++esac
++])
++
++# Helper functions for option handling.                     -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME.  Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ----------------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
++
++# Check to make sure that the build environment is sane.    -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
++[AC_MSG_CHECKING([whether build environment is sane])
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments.  Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++   if test "$[*]" = "X"; then
++      # -L didn't work.
++      set X `ls -t $srcdir/configure conftest.file`
++   fi
++   rm -f conftest.file
++   if test "$[*]" != "X $srcdir/configure conftest.file" \
++      && test "$[*]" != "X conftest.file $srcdir/configure"; then
++
++      # If neither matched, then we have a broken ls.  This can happen
++      # if, for instance, CONFIG_SHELL is bash and it inherits a
++      # broken ls alias from the environment.  This has actually
++      # happened.  Such a system could not be considered "sane".
++      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
++alias in your environment])
++   fi
++
++   test "$[2]" = conftest.file
++   )
++then
++   # Ok.
++   :
++else
++   AC_MSG_ERROR([newly created file is older than distributed files!
++Check your system clock])
++fi
++AC_MSG_RESULT(yes)])
++
++# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_STRIP
++# ---------------------
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries.  This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'.  However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++  AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
++
++# Copyright (C) 2006  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# _AM_SUBST_NOTMAKE(VARIABLE)
++# ---------------------------
++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
++# This macro is traced by Automake.
++AC_DEFUN([_AM_SUBST_NOTMAKE])
++
++# Check how to create a tarball.                            -*- Autoconf -*-
++
++# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# _AM_PROG_TAR(FORMAT)
++# --------------------
++# Check how to create a tarball in format FORMAT.
++# FORMAT should be one of `v7', `ustar', or `pax'.
++#
++# Substitute a variable $(am__tar) that is a command
++# writing to stdout a FORMAT-tarball containing the directory
++# $tardir.
++#     tardir=directory && $(am__tar) > result.tar
++#
++# Substitute a variable $(am__untar) that extract such
++# a tarball read from stdin.
++#     $(am__untar) < result.tar
++AC_DEFUN([_AM_PROG_TAR],
++[# Always define AMTAR for backward compatibility.
++AM_MISSING_PROG([AMTAR], [tar])
++m4_if([$1], [v7],
++     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
++     [m4_case([$1], [ustar],, [pax],,
++              [m4_fatal([Unknown tar format])])
++AC_MSG_CHECKING([how to create a $1 tar archive])
++# Loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
++_am_tools=${am_cv_prog_tar_$1-$_am_tools}
++# Do not fold the above two line into one, because Tru64 sh and
++# Solaris sh will not grok spaces in the rhs of `-'.
++for _am_tool in $_am_tools
++do
++  case $_am_tool in
++  gnutar)
++    for _am_tar in tar gnutar gtar;
++    do
++      AM_RUN_LOG([$_am_tar --version]) && break
++    done
++    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
++    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
++    am__untar="$_am_tar -xf -"
++    ;;
++  plaintar)
++    # Must skip GNU tar: if it does not support --format= it doesn't create
++    # ustar tarball either.
++    (tar --version) >/dev/null 2>&1 && continue
++    am__tar='tar chf - "$$tardir"'
++    am__tar_='tar chf - "$tardir"'
++    am__untar='tar xf -'
++    ;;
++  pax)
++    am__tar='pax -L -x $1 -w "$$tardir"'
++    am__tar_='pax -L -x $1 -w "$tardir"'
++    am__untar='pax -r'
++    ;;
++  cpio)
++    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
++    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
++    am__untar='cpio -i -H $1 -d'
++    ;;
++  none)
++    am__tar=false
++    am__tar_=false
++    am__untar=false
++    ;;
++  esac
++
++  # If the value was cached, stop now.  We just wanted to have am__tar
++  # and am__untar set.
++  test -n "${am_cv_prog_tar_$1}" && break
++
++  # tar/untar a dummy directory, and stop if the command works
++  rm -rf conftest.dir
++  mkdir conftest.dir
++  echo GrepMe > conftest.dir/file
++  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
++  rm -rf conftest.dir
++  if test -s conftest.tar; then
++    AM_RUN_LOG([$am__untar <conftest.tar])
++    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
++  fi
++done
++rm -rf conftest.dir
++
++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
++AC_MSG_RESULT([$am_cv_prog_tar_$1])])
++AC_SUBST([am__tar])
++AC_SUBST([am__untar])
++]) # _AM_PROG_TAR
++
 diff --git a/commit.d/10vcs-test b/commit.d/10vcs-test
 deleted file mode 100755
 index e33d734..0000000
@@ -2020,6 +2618,379 @@
 +elif [ "$LOWLEVEL_PACKAGE_MANAGER" = rpm ]; then
 +	rpm -qa --queryformat "%{name} %{version} %{arch}\n" | sort
 +fi
+diff --git a/missing b/missing
+new file mode 100755
+index 0000000..1c8ff70
+--- /dev/null
++++ b/missing
+@@ -0,0 +1,367 @@
++#! /bin/sh
++# Common stub for a few missing GNU programs while installing.
++
++scriptversion=2006-05-10.23
++
++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
++#   Free Software Foundation, Inc.
++# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++if test $# -eq 0; then
++  echo 1>&2 "Try \`$0 --help' for more information"
++  exit 1
++fi
++
++run=:
++sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
++sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
++
++# In the cases where this matters, `missing' is being run in the
++# srcdir already.
++if test -f configure.ac; then
++  configure_ac=configure.ac
++else
++  configure_ac=configure.in
++fi
++
++msg="missing on your system"
++
++case $1 in
++--run)
++  # Try to run requested program, and just exit if it succeeds.
++  run=
++  shift
++  "$@" && exit 0
++  # Exit code 63 means version mismatch.  This often happens
++  # when the user try to use an ancient version of a tool on
++  # a file that requires a minimum version.  In this case we
++  # we should proceed has if the program had been absent, or
++  # if --run hadn't been passed.
++  if test $? = 63; then
++    run=:
++    msg="probably too old"
++  fi
++  ;;
++
++  -h|--h|--he|--hel|--help)
++    echo "\
++$0 [OPTION]... PROGRAM [ARGUMENT]...
++
++Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
++error status if there is no known handling for PROGRAM.
++
++Options:
++  -h, --help      display this help and exit
++  -v, --version   output version information and exit
++  --run           try to run the given command, and emulate it if it fails
++
++Supported PROGRAM values:
++  aclocal      touch file \`aclocal.m4'
++  autoconf     touch file \`configure'
++  autoheader   touch file \`config.h.in'
++  autom4te     touch the output file, or create a stub one
++  automake     touch all \`Makefile.in' files
++  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
++  flex         create \`lex.yy.c', if possible, from existing .c
++  help2man     touch the output file
++  lex          create \`lex.yy.c', if possible, from existing .c
++  makeinfo     touch the output file
++  tar          try tar, gnutar, gtar, then tar without non-portable flags
++  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
++
++Send bug reports to <bug-automake at gnu.org>."
++    exit $?
++    ;;
++
++  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
++    echo "missing $scriptversion (GNU Automake)"
++    exit $?
++    ;;
++
++  -*)
++    echo 1>&2 "$0: Unknown \`$1' option"
++    echo 1>&2 "Try \`$0 --help' for more information"
++    exit 1
++    ;;
++
++esac
++
++# Now exit if we have it, but it failed.  Also exit now if we
++# don't have it and --version was passed (most likely to detect
++# the program).
++case $1 in
++  lex|yacc)
++    # Not GNU programs, they don't have --version.
++    ;;
++
++  tar)
++    if test -n "$run"; then
++       echo 1>&2 "ERROR: \`tar' requires --run"
++       exit 1
++    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++       exit 1
++    fi
++    ;;
++
++  *)
++    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++       # We have it, but it failed.
++       exit 1
++    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++       # Could not run --version or --help.  This is probably someone
++       # running `$TOOL --version' or `$TOOL --help' to check whether
++       # $TOOL exists and not knowing $TOOL uses missing.
++       exit 1
++    fi
++    ;;
++esac
++
++# If it does not exist, or fails to run (possibly an outdated version),
++# try to emulate it.
++case $1 in
++  aclocal*)
++    echo 1>&2 "\
++WARNING: \`$1' is $msg.  You should only need it if
++         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
++         to install the \`Automake' and \`Perl' packages.  Grab them from
++         any GNU archive site."
++    touch aclocal.m4
++    ;;
++
++  autoconf)
++    echo 1>&2 "\
++WARNING: \`$1' is $msg.  You should only need it if
++         you modified \`${configure_ac}'.  You might want to install the
++         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
++         archive site."
++    touch configure
++    ;;
++
++  autoheader)
++    echo 1>&2 "\
++WARNING: \`$1' is $msg.  You should only need it if
++         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
++         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
++         from any GNU archive site."
++    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
++    test -z "$files" && files="config.h"
++    touch_files=
++    for f in $files; do
++      case $f in
++      *:*) touch_files="$touch_files "`echo "$f" |
++				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
++      *) touch_files="$touch_files $f.in";;
++      esac
++    done
++    touch $touch_files
++    ;;
++
++  automake*)
++    echo 1>&2 "\
++WARNING: \`$1' is $msg.  You should only need it if
++         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
++         You might want to install the \`Automake' and \`Perl' packages.
++         Grab them from any GNU archive site."
++    find . -type f -name Makefile.am -print |
++	   sed 's/\.am$/.in/' |
++	   while read f; do touch "$f"; done
++    ;;
++
++  autom4te)
++    echo 1>&2 "\
++WARNING: \`$1' is needed, but is $msg.
++         You might have modified some files without having the
++         proper tools for further handling them.
++         You can get \`$1' as part of \`Autoconf' from any GNU
++         archive site."
++
++    file=`echo "$*" | sed -n "$sed_output"`
++    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++    if test -f "$file"; then
++	touch $file
++    else
++	test -z "$file" || exec >$file
++	echo "#! /bin/sh"
++	echo "# Created by GNU Automake missing as a replacement of"
++	echo "#  $ $@"
++	echo "exit 0"
++	chmod +x $file
++	exit 1
++    fi
++    ;;
++
++  bison|yacc)
++    echo 1>&2 "\
++WARNING: \`$1' $msg.  You should only need it if
++         you modified a \`.y' file.  You may need the \`Bison' package
++         in order for those modifications to take effect.  You can get
++         \`Bison' from any GNU archive site."
++    rm -f y.tab.c y.tab.h
++    if test $# -ne 1; then
++        eval LASTARG="\${$#}"
++	case $LASTARG in
++	*.y)
++	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
++	    if test -f "$SRCFILE"; then
++	         cp "$SRCFILE" y.tab.c
++	    fi
++	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
++	    if test -f "$SRCFILE"; then
++	         cp "$SRCFILE" y.tab.h
++	    fi
++	  ;;
++	esac
++    fi
++    if test ! -f y.tab.h; then
++	echo >y.tab.h
++    fi
++    if test ! -f y.tab.c; then
++	echo 'main() { return 0; }' >y.tab.c
++    fi
++    ;;
++
++  lex|flex)
++    echo 1>&2 "\
++WARNING: \`$1' is $msg.  You should only need it if
++         you modified a \`.l' file.  You may need the \`Flex' package
++         in order for those modifications to take effect.  You can get
++         \`Flex' from any GNU archive site."
++    rm -f lex.yy.c
++    if test $# -ne 1; then
++        eval LASTARG="\${$#}"
++	case $LASTARG in
++	*.l)
++	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
++	    if test -f "$SRCFILE"; then
++	         cp "$SRCFILE" lex.yy.c
++	    fi
++	  ;;
++	esac
++    fi
++    if test ! -f lex.yy.c; then
++	echo 'main() { return 0; }' >lex.yy.c
++    fi
++    ;;
++
++  help2man)
++    echo 1>&2 "\
++WARNING: \`$1' is $msg.  You should only need it if
++	 you modified a dependency of a manual page.  You may need the
++	 \`Help2man' package in order for those modifications to take
++	 effect.  You can get \`Help2man' from any GNU archive site."
++
++    file=`echo "$*" | sed -n "$sed_output"`
++    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++    if test -f "$file"; then
++	touch $file
++    else
++	test -z "$file" || exec >$file
++	echo ".ab help2man is required to generate this page"
++	exit 1
++    fi
++    ;;
++
++  makeinfo)
++    echo 1>&2 "\
++WARNING: \`$1' is $msg.  You should only need it if
++         you modified a \`.texi' or \`.texinfo' file, or any other file
++         indirectly affecting the aspect of the manual.  The spurious
++         call might also be the consequence of using a buggy \`make' (AIX,
++         DU, IRIX).  You might want to install the \`Texinfo' package or
++         the \`GNU make' package.  Grab either from any GNU archive site."
++    # The file to touch is that specified with -o ...
++    file=`echo "$*" | sed -n "$sed_output"`
++    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++    if test -z "$file"; then
++      # ... or it is the one specified with @setfilename ...
++      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
++      file=`sed -n '
++	/^@setfilename/{
++	  s/.* \([^ ]*\) *$/\1/
++	  p
++	  q
++	}' $infile`
++      # ... or it is derived from the source name (dir/f.texi becomes f.info)
++      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
++    fi
++    # If the file does not exist, the user really needs makeinfo;
++    # let's fail without touching anything.
++    test -f $file || exit 1
++    touch $file
++    ;;
++
++  tar)
++    shift
++
++    # We have already tried tar in the generic part.
++    # Look for gnutar/gtar before invocation to avoid ugly error
++    # messages.
++    if (gnutar --version > /dev/null 2>&1); then
++       gnutar "$@" && exit 0
++    fi
++    if (gtar --version > /dev/null 2>&1); then
++       gtar "$@" && exit 0
++    fi
++    firstarg="$1"
++    if shift; then
++	case $firstarg in
++	*o*)
++	    firstarg=`echo "$firstarg" | sed s/o//`
++	    tar "$firstarg" "$@" && exit 0
++	    ;;
++	esac
++	case $firstarg in
++	*h*)
++	    firstarg=`echo "$firstarg" | sed s/h//`
++	    tar "$firstarg" "$@" && exit 0
++	    ;;
++	esac
++    fi
++
++    echo 1>&2 "\
++WARNING: I can't seem to be able to run \`tar' with the given arguments.
++         You may want to install GNU tar or Free paxutils, or check the
++         command line arguments."
++    exit 1
++    ;;
++
++  *)
++    echo 1>&2 "\
++WARNING: \`$1' is needed, and is $msg.
++         You might have modified some files without having the
++         proper tools for further handling them.  Check the \`README' file,
++         it often tells you about the needed prerequisites for installing
++         this package.  You may also peek at any GNU archive site, in case
++         some other package would contain this missing \`$1' program."
++    exit 1
++    ;;
++esac
++
++exit 0
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
 diff --git a/post-install.d/50vcs-commit b/post-install.d/50vcs-commit
 deleted file mode 100755
 index 12fd187..0000000


This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.



More information about the devel mailing list