[csw-devel] SF.net SVN: gar:[3685] csw/mgar/pkg/libnet/trunk
hson at users.sourceforge.net
hson at users.sourceforge.net
Tue Mar 10 04:37:31 CET 2009
Revision: 3685
http://gar.svn.sourceforge.net/gar/?rev=3685&view=rev
Author: hson
Date: 2009-03-10 03:37:31 +0000 (Tue, 10 Mar 2009)
Log Message:
-----------
libnet: Added patches, old libraries, man pages and other documentation
Modified Paths:
--------------
csw/mgar/pkg/libnet/trunk/Makefile
csw/mgar/pkg/libnet/trunk/checksums
Added Paths:
-----------
csw/mgar/pkg/libnet/trunk/files/buildpatch
csw/mgar/pkg/libnet/trunk/files/libnet-cq-end-loop.patch
csw/mgar/pkg/libnet/trunk/files/libnet.pc.in
csw/mgar/pkg/libnet/trunk/files/libnet.so.1.0.2.i
csw/mgar/pkg/libnet/trunk/files/libnet.so.1.0.2.s
csw/mgar/pkg/libnet/trunk/files/libnet_build_ntp.patch
csw/mgar/pkg/libnet/trunk/files/libnet_checksum.c.patch
csw/mgar/pkg/libnet/trunk/files/libnet_pblock_coalesce_leak.patch
csw/mgar/pkg/libnet/trunk/files/ltmain.sh
Removed Paths:
-------------
csw/mgar/pkg/libnet/trunk/files/mainpatch
Modified: csw/mgar/pkg/libnet/trunk/Makefile
===================================================================
--- csw/mgar/pkg/libnet/trunk/Makefile 2009-03-09 22:17:38 UTC (rev 3684)
+++ csw/mgar/pkg/libnet/trunk/Makefile 2009-03-10 03:37:31 UTC (rev 3685)
@@ -9,8 +9,9 @@
MASTER_SITES = http://www.packetfactory.net/libnet/dist/
DISTFILES = $(GARNAME)-$(GARVERSION).tar.gz
-DISTFILES += $(call admfiles,CSWlibnet,)
+LICENSE = doc/COPYING
+
UFILES_REGEX = $(GARNAME)-(\d+(?:\.\d+)*).tar.gz
SPKG_SOURCEURL = http://www.packetfactory.net/libnet/
@@ -19,8 +20,52 @@
DISTNAME = libnet
-PATCHFILES = mainpatch
+PATCHFILES = buildpatch
+PATCHFILES += libnet_pblock_coalesce_leak.patch
+PATCHFILES += libnet-cq-end-loop.patch
+PATCHFILES += libnet_build_ntp.patch
+PATCHFILES += libnet_checksum.c.patch
CONFIGURE_ARGS = $(DIRPATHS)
+TEST_SCRIPTS =
+
include gar/category.mk
+
+post-extract-$(MODULATION):
+ ( cp $(FILEDIR)/ltmain.sh $(WORKROOTDIR)/build-$(MODULATION)/$(DISTNAME) )
+ ( cp $(FILEDIR)/libnet.pc.in $(WORKROOTDIR)/build-$(MODULATION)/$(DISTNAME)/src )
+ @$(MAKECOOKIE)
+
+post-install-modulated:
+ @ginstall -d $(DESTDIR)$(bindir)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/libnet-config $(DESTDIR)$(bindir)
+ @ginstall -d $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/BUGS $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/CHANGELOG $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/CONTRIB $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/COPYING $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/DESIGN_NOTES $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/MIGRATION $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/PACKET_BUILDING $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/PORTED $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/RAWSOCKET_NON_SEQUITUR $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/TODO $(DESTDIR)$(docdir)/$(GARNAME)
+ @ginstall -d $(DESTDIR)$(mandir)/man3
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/man/man3/libnet-functions.h.3 $(DESTDIR)$(mandir)/man3
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/man/man3/libnet-headers.h.3 $(DESTDIR)$(mandir)/man3
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/man/man3/libnet-macros.h.3 $(DESTDIR)$(mandir)/man3
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/man/man3/libnet.h.3 $(DESTDIR)$(mandir)/man3
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/man/man3/libnet_802_1q_hdr.3 $(DESTDIR)$(mandir)/man3
+ @ginstall -m 444 $(WORKDIR)/$(DISTNAME)/doc/man/man3/libnet_802_1x_hdr.3 $(DESTDIR)$(mandir)/man3
+ @$(MAKECOOKIE)
+
+post-install-isa-sparcv8:
+ @ginstall -d $(DESTDIR)$(libdir)
+ @cp $(FILEDIR)/libnet.so.1.0.2.s $(INSTALLISADIR)/opt/csw/lib/libnet.so.1.0.2
+ @$(MAKECOOKIE)
+
+post-install-isa-i386:
+ @ginstall -d $(DESTDIR)$(libdir)
+ @cp $(FILEDIR)/libnet.so.1.0.2.i $(INSTALLISADIR)/opt/csw/lib/libnet.so.1.0.2
+ @$(MAKECOOKIE)
Modified: csw/mgar/pkg/libnet/trunk/checksums
===================================================================
--- csw/mgar/pkg/libnet/trunk/checksums 2009-03-09 22:17:38 UTC (rev 3684)
+++ csw/mgar/pkg/libnet/trunk/checksums 2009-03-10 03:37:31 UTC (rev 3685)
@@ -1,3 +1,6 @@
be845c41170d72c7db524f3411b50256 download/libnet-1.1.2.1.tar.gz
-f88f915ffd9e70173036d42db0d3642b download/CSWlibnet.gspec
-ca847f8bf19895372cb392215badc008 download/mainpatch
+8bd8908d73e8b0e81e372f5ef2cf552a download/buildpatch
+c074b4d206f3041a64afcde1a5b2d5d0 download/libnet_pblock_coalesce_leak.patch
+ca892b6a33f04cafb6def978c97ecb45 download/libnet-cq-end-loop.patch
+b49b610c4726a359bd42c3ad3211f169 download/libnet_build_ntp.patch
+fe5dc7c78f5326f271c75595ff50d376 download/libnet_checksum.c.patch
Added: csw/mgar/pkg/libnet/trunk/files/buildpatch
===================================================================
--- csw/mgar/pkg/libnet/trunk/files/buildpatch (rev 0)
+++ csw/mgar/pkg/libnet/trunk/files/buildpatch 2009-03-10 03:37:31 UTC (rev 3685)
@@ -0,0 +1,42360 @@
+diff -ru libnet.orig/Makefile.in libnet/Makefile.in
+--- libnet.orig/Makefile.in 2004-03-11 19:50:20.000000000 +0100
++++ libnet/Makefile.in 2009-03-09 16:58:48.160768448 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.6.3 from Makefile.am.
++# Makefile.in generated by automake 1.10.2 from Makefile.am.
+ # @configure_input@
+
+-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+-# Free Software Foundation, Inc.
++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
++# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -14,7 +14,7 @@
+
+ @SET_MAKE@
+
+-# $Id: Makefile.in,v 1.16 2004/03/11 18:50:20 mike Exp $
++# $Id: Makefile.am,v 1.7 2004/03/01 20:26:11 mike Exp $
+ #
+ # Libnet automake information file
+ # Copyright (c) 1998 - 2004 Mike D. Schiffman <mike at infonexus.com>
+@@ -22,139 +22,251 @@
+ #
+ # Process this file with automake to produce a Makefile.in script.
+
+-# $Id: Makefile.in,v 1.16 2004/03/11 18:50:20 mike Exp $
++# $Id: Makefile.am.common,v 1.3 2004/01/03 20:31:00 mike Exp $
+ #
+ # Libnet automake information file
+ # Copyright (c) 1998 - 2004 Mike D. Schiffman <mike at infonexus.com>
+ # All rights reserved.
+ #
+-SHELL = @SHELL@
+-
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-top_builddir = .
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
+ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+-INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+-INSTALL_DATA = @INSTALL_DATA@
+ install_sh_DATA = $(install_sh) -c -m 644
+ install_sh_PROGRAM = $(install_sh) -c
+ install_sh_SCRIPT = $(install_sh) -c
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+ INSTALL_HEADER = $(INSTALL_DATA)
+-transform = @program_transform_name@
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-build_alias = @build_alias@
+ build_triplet = @build@
+-host_alias = @host_alias@
+ host_triplet = @host@
+-target_alias = @target_alias@
+ target_triplet = @target@
+-
+-EXEEXT = @EXEEXT@
+-OBJEXT = @OBJEXT@
+-PATH_SEPARATOR = @PATH_SEPARATOR@
++DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
++ $(srcdir)/Makefile.in $(srcdir)/libnet-config.in \
++ $(srcdir)/version.h.in $(top_srcdir)/Makefile.am.common \
++ $(top_srcdir)/configure acconfig.h config.guess config.sub \
++ install-sh ltmain.sh missing mkinstalldirs
++subdir = .
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno config.status.lineno
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = $(top_builddir)/include/config.h
++CONFIG_CLEAN_FILES = version.h libnet-config
++depcomp =
++am__depfiles_maybe =
++SOURCES =
++DIST_SOURCES =
++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
++ html-recursive info-recursive install-data-recursive \
++ install-dvi-recursive install-exec-recursive \
++ install-html-recursive install-info-recursive \
++ install-pdf-recursive install-ps-recursive install-recursive \
++ installcheck-recursive installdirs-recursive pdf-recursive \
++ ps-recursive uninstall-recursive
++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
++ distclean-recursive maintainer-clean-recursive
++ETAGS = etags
++CTAGS = ctags
++DIST_SUBDIRS = $(SUBDIRS)
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++ { test ! -d $(distdir) \
++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
++ && rm -fr $(distdir); }; }
++DIST_ARCHIVES = $(distdir).tar.gz
++GZIP_ENV = --best
++distuninstallcheck_listfiles = find . -type f -print
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
+ ADDITIONAL_LIBS = @ADDITIONAL_LIBS@
+ AMTAR = @AMTAR@
++AR = @AR@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
+ AWK = @AWK@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
++CPP = @CPP@
++CPPFLAGS = @CPPFLAGS@
++CXX = @CXX@
++CXXCPP = @CXXCPP@
++CXXDEPMODE = @CXXDEPMODE@
++CXXFLAGS = @CXXFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
+ DEPDIR = @DEPDIR@
++ECHO = @ECHO@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
+ ENDIANESS = @ENDIANESS@
++EXEEXT = @EXEEXT@
++F77 = @F77@
++FFLAGS = @FFLAGS@
++GREP = @GREP@
+ HAVE_PACKET_SOCKET = @HAVE_PACKET_SOCKET@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
+ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
++LDFLAGS = @LDFLAGS@
++LIBNET_AGE = @LIBNET_AGE@
+ LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@
+ LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@
+ LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@
++LIBNET_CURRENT = @LIBNET_CURRENT@
++LIBNET_REVISION = @LIBNET_REVISION@
+ LIBNET_VERSION = @LIBNET_VERSION@
++LIBNET_VERSION_INFO = @LIBNET_VERSION_INFO@
++LIBOBJS = @LIBOBJS@
++LIBS = @LIBS@
++LIBTOOL = @LIBTOOL@
++LN_S = @LN_S@
++LTLIBOBJS = @LTLIBOBJS@
+ MAINT = @MAINT@
++MAKEINFO = @MAKEINFO@
++MKDIR_P = @MKDIR_P@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_VERSION = @PACKAGE_VERSION@
++PATH_SEPARATOR = @PATH_SEPARATOR@
+ RANLIB = @RANLIB@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
+ STRIP = @STRIP@
+ VERSION = @VERSION@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_CC = @ac_ct_CC@
++ac_ct_CXX = @ac_ct_CXX@
++ac_ct_F77 = @ac_ct_F77@
+ am__include = @am__include@
++am__leading_dot = @am__leading_dot@
+ am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
+ install_sh = @install_sh@
+-
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target = @target@
++target_alias = @target_alias@
++target_cpu = @target_cpu@
++target_os = @target_os@
++target_vendor = @target_vendor@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
+ AUTOMAKE_OPTIONS = foreign no-dependencies
+-
+ DISTCLEANFILES = *~
+-
+ SUBDIRS = include src sample
+-
+ EXTRA_DIST = Makefile.am.common
+-
+ bin_scripts = libnet-config
+-subdir = .
+-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_HEADER = $(top_builddir)/include/config.h
+-CONFIG_CLEAN_FILES = version.h libnet-config
+-depcomp =
+-am__depfiles_maybe =
+-DIST_SOURCES =
+-
+-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+- uninstall-info-recursive all-recursive install-data-recursive \
+- install-exec-recursive installdirs-recursive install-recursive \
+- uninstall-recursive check-recursive installcheck-recursive
+-DIST_COMMON = README Makefile.am Makefile.in acconfig.h acinclude.m4 \
+- aclocal.m4 config.guess config.sub configure configure.in \
+- install-sh libnet-config.in missing mkinstalldirs version.h.in
+-DIST_SUBDIRS = $(SUBDIRS)
+ all: all-recursive
+
+ .SUFFIXES:
+-
+-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+- configure.lineno
+-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4)
++am--refresh:
++ @:
++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
++ cd $(srcdir) && $(AUTOMAKE) --foreign \
++ && exit 0; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+-Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
++.PRECIOUS: Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ echo ' $(SHELL) ./config.status'; \
++ $(SHELL) ./config.status;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
++ esac;
+
+-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+- cd $(srcdir) && $(AUTOCONF)
+
+-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4
++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
++ cd $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+-version.h: $(top_builddir)/config.status version.h.in
++version.h: $(top_builddir)/config.status $(srcdir)/version.h.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+-libnet-config: $(top_builddir)/config.status libnet-config.in
++libnet-config: $(top_builddir)/config.status $(srcdir)/libnet-config.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+-uninstall-info-am:
++
++mostlyclean-libtool:
++ -rm -f *.lo
++
++clean-libtool:
++ -rm -rf .libs _libs
++
++distclean-libtool:
++ -rm -f libtool config.lt
+
+ # This directory's subdirectories are mostly independent; you can cd
+ # into them and run `make' without going through this Makefile.
+@@ -163,7 +275,13 @@
+ # (which will cause the Makefiles to be regenerated when you run `make');
+ # (2) otherwise, pass the desired values on the `make' command line.
+ $(RECURSIVE_TARGETS):
+- @set fnord $$MAKEFLAGS; amf=$$2; \
++ @failcom='exit 1'; \
++ for f in x $$MAKEFLAGS; do \
++ case $$f in \
++ *=* | --[!k]*);; \
++ *k*) failcom='fail=yes';; \
++ esac; \
++ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+@@ -175,15 +293,20 @@
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
++ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+-mostlyclean-recursive clean-recursive distclean-recursive \
+-maintainer-clean-recursive:
+- @set fnord $$MAKEFLAGS; amf=$$2; \
++$(RECURSIVE_CLEAN_TARGETS):
++ @failcom='exit 1'; \
++ for f in x $$MAKEFLAGS; do \
++ case $$f in \
++ *=* | --[!k]*);; \
++ *k*) failcom='fail=yes';; \
++ esac; \
++ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+@@ -204,44 +327,67 @@
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
++ || eval $$failcom; \
+ done && test -z "$$fail"
+ tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+-
+-ETAGS = etags
+-ETAGSFLAGS =
+-
+-tags: TAGS
++ctags-recursive:
++ list='$(SUBDIRS)'; for subdir in $$list; do \
++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
++ done
+
+ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+- $(AWK) ' { files[$$0] = 1; } \
+- END { for (i in files) print i; }'`; \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
++tags: TAGS
+
+ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
++ include_option=--etags-include; \
++ empty_fix=.; \
++ else \
++ include_option=--include; \
++ empty_fix=; \
++ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
++ test ! -f $$subdir/TAGS || \
++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+- $(AWK) ' { files[$$0] = 1; } \
+- END { for (i in files) print i; }'`; \
+- test -z "$(ETAGS_ARGS)$$tags$$unique" \
+- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$tags $$unique; \
++ fi
++ctags: CTAGS
++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
++ tags=; \
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ test -z "$(CTAGS_ARGS)$$tags$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+ GTAGS:
+@@ -250,34 +396,26 @@
+ && gtags -i $(GTAGS_ARGS) $$here
+
+ distclean-tags:
+- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+-
+-top_distdir = .
+-distdir = $(PACKAGE)-$(VERSION)
+-
+-am__remove_distdir = \
+- { test ! -d $(distdir) \
+- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+- && rm -fr $(distdir); }; }
+-
+-GZIP_ENV = --best
+-distcleancheck_listfiles = find . -type f -print
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+ distdir: $(DISTFILES)
+ $(am__remove_distdir)
+- mkdir $(distdir)
+- $(mkinstalldirs) $(distdir)/. $(distdir)/include
+- @list='$(DISTFILES)'; for file in $$list; do \
++ test -d $(distdir) || mkdir $(distdir)
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+- dir="/$$dir"; \
+- $(mkinstalldirs) "$(distdir)$$dir"; \
+- else \
+- dir=''; \
+- fi; \
+ if test -d $$d/$$file; then \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+@@ -288,15 +426,19 @@
+ || exit 1; \
+ fi; \
+ done
+- list='$(SUBDIRS)'; for subdir in $$list; do \
++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+- test -d $(distdir)/$$subdir \
+- || mkdir $(distdir)/$$subdir \
++ test -d "$(distdir)/$$subdir" \
++ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
++ distdir=`$(am__cd) $(distdir) && pwd`; \
++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+- top_distdir="$(top_distdir)" \
+- distdir=../$(distdir)/$$subdir \
++ top_distdir="$$top_distdir" \
++ distdir="$$distdir/$$subdir" \
++ am__remove_distdir=: \
++ am__skip_length_check=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+@@ -304,29 +446,63 @@
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+ dist-gzip: distdir
+- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++dist-bzip2: distdir
++ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
++ $(am__remove_distdir)
++
++dist-lzma: distdir
++ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
++ $(am__remove_distdir)
++
++dist-tarZ: distdir
++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
++ $(am__remove_distdir)
++
++dist-shar: distdir
++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
++ $(am__remove_distdir)
++
++dist-zip: distdir
++ -rm -f $(distdir).zip
++ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+ dist dist-all: distdir
+- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+ # This target untars the dist file and tries a VPATH configuration. Then
+ # it guarantees that the distribution is self-contained by making another
+ # tarfile.
+ distcheck: dist
+- $(am__remove_distdir)
+- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
++ case '$(DIST_ARCHIVES)' in \
++ *.tar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
++ *.tar.bz2*) \
++ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
++ *.tar.lzma*) \
++ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
++ *.tar.Z*) \
++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
++ *.shar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
++ *.zip*) \
++ unzip $(distdir).zip ;;\
++ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+- mkdir $(distdir)/=build
+- mkdir $(distdir)/=inst
++ mkdir $(distdir)/_build
++ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+- dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+- && cd $(distdir)/=build \
+- && ../configure --srcdir=.. --prefix=$$dc_install_base \
++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++ && cd $(distdir)/_build \
++ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+@@ -334,23 +510,40 @@
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+- && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+- || { echo "ERROR: files left after uninstall:" ; \
+- find $$dc_install_base -type f -print ; \
+- exit 1; } >&2 ) \
+- && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+- && rm -f $(distdir).tar.gz \
++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++ distuninstallcheck \
++ && chmod -R a-w "$$dc_install_base" \
++ && ({ \
++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++ } || { rm -rf "$$dc_destdir"; exit 1; }) \
++ && rm -rf "$$dc_destdir" \
++ && $(MAKE) $(AM_MAKEFLAGS) dist \
++ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+- @echo "$(distdir).tar.gz is ready for distribution" | \
+- sed 'h;s/./=/g;p;x;p;x'
++ @(echo "$(distdir) archives ready for distribution: "; \
++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
++distuninstallcheck:
++ @cd $(distuninstallcheck_dir) \
++ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
++ || { echo "ERROR: files left after uninstall:" ; \
++ if test -n "$(DESTDIR)"; then \
++ echo " (check DESTDIR support)"; \
++ fi ; \
++ $(distuninstallcheck_listfiles) ; \
++ exit 1; } >&2
+ distcleancheck: distclean
+- if test '$(srcdir)' = . ; then \
++ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+- test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+- || { echo "ERROR: files left after distclean:" ; \
++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+ check-am: all-am
+@@ -358,7 +551,6 @@
+ all-am: Makefile
+ installdirs: installdirs-recursive
+ installdirs-am:
+-
+ install: install-recursive
+ install-exec: install-exec-recursive
+ install-data: install-data-recursive
+@@ -370,7 +562,7 @@
+ installcheck: installcheck-recursive
+ install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+- INSTALL_STRIP_FLAG=-s \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ mostlyclean-generic:
+@@ -378,7 +570,7 @@
+ clean-generic:
+
+ distclean-generic:
+- -rm -f Makefile $(CONFIG_CLEAN_FILES)
++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+ maintainer-clean-generic:
+@@ -386,57 +578,80 @@
+ @echo "it deletes files that may require special tools to rebuild."
+ clean: clean-recursive
+
+-clean-am: clean-generic mostlyclean-am
++clean-am: clean-generic clean-libtool mostlyclean-am
+
+ distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+-distclean-am: clean-am distclean-generic distclean-tags
++ -rm -f Makefile
++distclean-am: clean-am distclean-generic distclean-libtool \
++ distclean-tags
+
+ dvi: dvi-recursive
+
+ dvi-am:
+
++html: html-recursive
++
+ info: info-recursive
+
+ info-am:
+
+ install-data-am:
+
++install-dvi: install-dvi-recursive
++
+ install-exec-am:
+
++install-html: install-html-recursive
++
+ install-info: install-info-recursive
+
+ install-man:
+
++install-pdf: install-pdf-recursive
++
++install-ps: install-ps-recursive
++
+ installcheck-am:
+
+ maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+- -rm -rf autom4te.cache
++ -rm -rf $(top_srcdir)/autom4te.cache
++ -rm -f Makefile
+ maintainer-clean-am: distclean-am maintainer-clean-generic
+
+ mostlyclean: mostlyclean-recursive
+
+-mostlyclean-am: mostlyclean-generic
++mostlyclean-am: mostlyclean-generic mostlyclean-libtool
++
++pdf: pdf-recursive
+
+-uninstall-am: uninstall-info-am
++pdf-am:
+
+-uninstall-info: uninstall-info-recursive
++ps: ps-recursive
+
+-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+- clean-generic clean-recursive dist dist-all dist-gzip distcheck \
+- distclean distclean-generic distclean-recursive distclean-tags \
+- distcleancheck distdir dvi dvi-am dvi-recursive info info-am \
+- info-recursive install install-am install-data install-data-am \
+- install-data-recursive install-exec install-exec-am \
+- install-exec-recursive install-info install-info-am \
+- install-info-recursive install-man install-recursive \
+- install-strip installcheck installcheck-am installdirs \
+- installdirs-am installdirs-recursive maintainer-clean \
+- maintainer-clean-generic maintainer-clean-recursive mostlyclean \
+- mostlyclean-generic mostlyclean-recursive tags tags-recursive \
+- uninstall uninstall-am uninstall-info-am \
+- uninstall-info-recursive uninstall-recursive
++ps-am:
++
++uninstall-am:
++
++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
++ install-strip
++
++.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
++ all all-am am--refresh check check-am clean clean-generic \
++ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
++ dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
++ distclean distclean-generic distclean-libtool distclean-tags \
++ distcleancheck distdir distuninstallcheck dvi dvi-am html \
++ html-am info info-am install install-am install-data \
++ install-data-am install-dvi install-dvi-am install-exec \
++ install-exec-am install-html install-html-am install-info \
++ install-info-am install-man install-pdf install-pdf-am \
++ install-ps install-ps-am install-strip installcheck \
++ installcheck-am installdirs installdirs-am maintainer-clean \
++ maintainer-clean-generic mostlyclean mostlyclean-generic \
++ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
++ uninstall uninstall-am
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+diff -ru libnet.orig/acinclude.m4 libnet/acinclude.m4
+--- libnet.orig/acinclude.m4 2004-01-16 00:53:06.000000000 +0100
++++ libnet/acinclude.m4 2009-03-10 00:34:01.428768705 +0100
+@@ -11,7 +11,7 @@
+ dnl usage: AC_LIBNET_LINUX_PROCFS
+ dnl results: HAVE_LINUX_PROCFS
+ dnl
+-AC_DEFUN(AC_LIBNET_LINUX_PROCFS,
++AC_DEFUN([AC_LIBNET_LINUX_PROCFS],
+ [AC_MSG_CHECKING(for Linux proc filesystem)
+ AC_CACHE_VAL(ac_cv_libnet_linux_procfs,
+ if test "x`cat /proc/sys/kernel/ostype 2>&-`" = "xLinux" ; then
+@@ -37,15 +37,15 @@
+ dnl HAVE_PACKET_SOCKET (DEFINED)
+ dnl
+
+-AC_DEFUN(AC_LIBNET_CHECK_PF_PACKET,
++AC_DEFUN([AC_LIBNET_CHECK_PF_PACKET],
+ [
+ AC_MSG_CHECKING(for packet socket (PF_SOCKET))
+- AC_CACHE_VAL(ac_libnet_have_packet_socket,
++ AC_CACHE_VAL(ac_cv_libnet_have_packet_socket,
+
+ [case "$target_os" in
+
+ linux)
+- ac_libnet_have_packet_socket = no
++ ac_cv_libnet_have_packet_socket = no
+ ;;
+ *)
+
+@@ -94,17 +94,17 @@
+
+ # Oopz 4.3 BSD doesn't have this. Sorry.
+ if test ! -x ./pf_packet-test ; then
+- ac_libnet_have_packet_socket=choked
++ ac_cv_libnet_have_packet_socket=choked
+ else
+- ac_libnet_have_packet_socket=`./pf_packet-test`;
++ ac_cv_libnet_have_packet_socket=`./pf_packet-test`;
+ fi
+- if test $ac_libnet_have_packet_socket = choked; then
++ if test $ac_cv_libnet_have_packet_socket = choked; then
+ AC_MSG_RESULT(test program compile choked... assuming no)
+- elif test $ac_libnet_have_packet_socket = yes; then
++ elif test $ac_cv_libnet_have_packet_socket = yes; then
+ AC_MSG_RESULT(yes)
+- elif test $ac_libnet_have_packet_socket = probably; then
++ elif test $ac_cv_libnet_have_packet_socket = probably; then
+ AC_MSG_RESULT(test program got EPERM... assuming yes)
+- elif test $ac_libnet_have_packet_socket = no; then
++ elif test $ac_cv_libnet_have_packet_socket = no; then
+ AC_MSG_RESULT(no)
+ fi
+
+@@ -112,7 +112,7 @@
+ ;;
+ esac])
+
+- if test $ac_libnet_have_packet_socket = yes -o $ac_libnet_have_packet_socket = probably; then
++ if test $ac_cv_libnet_have_packet_socket = yes -o $ac_cv_libnet_have_packet_socket = probably; then
+ AC_DEFINE(HAVE_PACKET_SOCKET)
+ fi
+ ])
+@@ -131,17 +131,17 @@
+ dnl
+ dnl
+
+-AC_DEFUN(AC_LIBNET_CHECK_LIBNET_VER,
++AC_DEFUN([AC_LIBNET_CHECK_LIBNET_VER],
+ [
+ AC_CHECK_LIB(net, libnet_build_ip, AC_MSG_CHECKING(version) \
+
+ changequote(<<, >>)dnl
+- if [[ ! -f $LIB_PREFIX/libnet.a ]] ; then
++ if [[ ! -f $LIB_PREFIX/libnet.la ]] ; then
+ changequote([, ])dnl
+- AC_MSG_RESULT($LIB_PREFIX/libnet.a doesn't exist)
++ AC_MSG_RESULT($LIB_PREFIX/libnet.la doesn't exist)
+ AC_MSG_RESULT(previous libnet install lives elsewhere, you should probably find it)
+ else
+- __LIBNET_VERSION=`strings $LIB_PREFIX/libnet.a | grep "libnet version"\
++ __LIBNET_VERSION=`strings $LIB_PREFIX/libnet.la | grep "libnet version"\
+ | cut -f3 -d" "`;\
+ if test -z "$__LIBNET_VERSION"; then
+ AC_MSG_RESULT(<0.8)
+@@ -166,7 +166,7 @@
+ dnl HAVE_STRUCT_IP_CSUM (DEFINED)
+ dnl
+
+-AC_DEFUN(AC_LIBNET_CHECK_IP_CSUM,
++AC_DEFUN([AC_LIBNET_CHECK_IP_CSUM],
+ [
+ AC_MSG_CHECKING([struct ip contains ip_csum])
+ AC_TRY_COMPILE([
+@@ -199,7 +199,7 @@
+ dnl LBL_ALIGN (DEFINED)
+ dnl
+
+-AC_DEFUN(AC_LBL_UNALIGNED_ACCESS,
++AC_DEFUN([AC_LBL_UNALIGNED_ACCESS],
+ [AC_MSG_CHECKING(if unaligned accesses fail)
+ AC_CACHE_VAL(ac_cv_lbl_unaligned_fail,
+ [case "$target_cpu" in
+@@ -278,7 +278,7 @@
+ dnl LIBNET_LIL_ENDIAN = 1
+ dnl
+
+-AC_DEFUN(AC_LIBNET_ENDIAN_CHECK,
++AC_DEFUN([AC_LIBNET_ENDIAN_CHECK],
+ [AC_MSG_CHECKING(machine endianess)
+
+ cat > conftest.c << EOF
+@@ -439,7 +439,7 @@
+ dnl statically and happen to have a libresolv.a lying around (and no
+ dnl libnsl.a).
+ dnl
+-AC_DEFUN(AC_LBL_LIBRARY_NET, [
++AC_DEFUN([AC_LBL_LIBRARY_NET], [
+ # Most operating systems have gethostbyname() in the default searched
+ # libraries (i.e. libc):
+ AC_CHECK_FUNC(gethostbyname, ,
+diff -ru libnet.orig/aclocal.m4 libnet/aclocal.m4
+--- libnet.orig/aclocal.m4 2004-03-01 21:26:11.000000000 +0100
++++ libnet/aclocal.m4 2009-03-09 16:58:13.599561854 +0100
+@@ -1,7 +1,7 @@
+-# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*-
++# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
+
+-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
+-# Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ # This file is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -11,771 +11,6622 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+-dnl $Id: aclocal.m4,v 1.9 2004/03/01 20:26:11 mike Exp $
+-dnl
+-dnl Libnet specific autoconf macros
+-dnl Copyright (c) 1998 - 2004 Mike D. Schiffman <mike at infonexus.com>
+-dnl All rights reserved.
+-dnl
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
++[m4_warning([this file was generated for autoconf 2.63.
++You have another version of autoconf. It may work, but is not guaranteed to.
++If you have problems, you may need to regenerate the build system entirely.
++To do so, use the procedure documented by the package, typically `autoreconf'.])])
++
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
++
++# serial 51 AC_PROG_LIBTOOL
++
++
++# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
++# -----------------------------------------------------------
++# If this macro is not defined by Autoconf, define it here.
++m4_ifdef([AC_PROVIDE_IFELSE],
++ [],
++ [m4_define([AC_PROVIDE_IFELSE],
++ [m4_ifdef([AC_PROVIDE_$1],
++ [$2], [$3])])])
+
+-dnl
+-dnl Check for the Linux /proc filesystem
+-dnl
+-dnl usage: AC_LIBNET_LINUX_PROCFS
+-dnl results: HAVE_LINUX_PROCFS
+-dnl
+-AC_DEFUN(AC_LIBNET_LINUX_PROCFS,
+- [AC_MSG_CHECKING(for Linux proc filesystem)
+- AC_CACHE_VAL(ac_cv_libnet_linux_procfs,
+- if test "x`cat /proc/sys/kernel/ostype 2>&-`" = "xLinux" ; then
+- ac_cv_libnet_linux_procfs=yes
+- else
+- ac_cv_libnet_linux_procfs=no
+- fi)
+- AC_MSG_RESULT($ac_cv_libnet_linux_procfs)
+- if test $ac_cv_libnet_linux_procfs = yes ; then
+- AC_DEFINE(HAVE_LINUX_PROCFS, 1,
+- [Define if you have the Linux /proc filesystem.])
+- fi])
+
+-dnl
+-dnl Checks to see if this linux kernel has a working PF_PACKET
+-dnl
+-dnl usage:
+-dnl
+-dnl AC_LIBNET_CHECK_PF_PACKET
+-dnl
+-dnl results:
+-dnl
+-dnl HAVE_PACKET_SOCKET (DEFINED)
+-dnl
++# AC_PROG_LIBTOOL
++# ---------------
++AC_DEFUN([AC_PROG_LIBTOOL],
++[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
++dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
++dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
++ AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [AC_LIBTOOL_CXX],
++ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
++ ])])
++dnl And a similar setup for Fortran 77 support
++ AC_PROVIDE_IFELSE([AC_PROG_F77],
++ [AC_LIBTOOL_F77],
++ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
++])])
++
++dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
++dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
++dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
++ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++ [AC_LIBTOOL_GCJ],
++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++ [AC_LIBTOOL_GCJ],
++ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
++ [AC_LIBTOOL_GCJ],
++ [ifdef([AC_PROG_GCJ],
++ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++ ifdef([A][M_PROG_GCJ],
++ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++ ifdef([LT_AC_PROG_GCJ],
++ [define([LT_AC_PROG_GCJ],
++ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
++])])# AC_PROG_LIBTOOL
++
++
++# _AC_PROG_LIBTOOL
++# ----------------
++AC_DEFUN([_AC_PROG_LIBTOOL],
++[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
++
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
++
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
++
++# Prevent multiple expansion
++define([AC_PROG_LIBTOOL], [])
++])# _AC_PROG_LIBTOOL
++
++
++# AC_LIBTOOL_SETUP
++# ----------------
++AC_DEFUN([AC_LIBTOOL_SETUP],
++[AC_PREREQ(2.50)dnl
++AC_REQUIRE([AC_ENABLE_SHARED])dnl
++AC_REQUIRE([AC_ENABLE_STATIC])dnl
++AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_LD])dnl
++AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
++AC_REQUIRE([AC_PROG_NM])dnl
++
++AC_REQUIRE([AC_PROG_LN_S])dnl
++AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
++AC_REQUIRE([AC_OBJEXT])dnl
++AC_REQUIRE([AC_EXEEXT])dnl
++dnl
++
++AC_LIBTOOL_SYS_MAX_CMD_LEN
++AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
++AC_LIBTOOL_OBJDIR
++
++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++_LT_AC_PROG_ECHO_BACKSLASH
++
++case $host_os in
++aix3*)
++ # AIX sometimes has problems with the GCC collect2 program. For some
++ # reason, if we set the COLLECT_NAMES environment variable, the problems
++ # vanish in a puff of smoke.
++ if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++ fi
++ ;;
++esac
+
+-AC_DEFUN(AC_LIBNET_CHECK_PF_PACKET,
+-[
+- AC_MSG_CHECKING(for packet socket (PF_SOCKET))
+- AC_CACHE_VAL(ac_libnet_have_packet_socket,
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
++
++# Same as above, but do not quote variable references.
++[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++
++# Constants:
++rm="rm -f"
++
++# Global variables:
++default_ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++ltmain="$ac_aux_dir/ltmain.sh"
++ofile="$default_ofile"
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++AC_CHECK_TOOL(AR, ar, false)
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++AC_CHECK_TOOL(STRIP, strip, :)
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
++test -z "$AS" && AS=as
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++test -z "$LD" && LD=ld
++test -z "$LN_S" && LN_S="ln -s"
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++test -z "$NM" && NM=nm
++test -z "$SED" && SED=sed
++test -z "$OBJDUMP" && OBJDUMP=objdump
++test -z "$RANLIB" && RANLIB=:
++test -z "$STRIP" && STRIP=:
++test -z "$ac_objext" && ac_objext=o
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++ case $host_os in
++ openbsd*)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++ ;;
++ *)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++ ;;
++ esac
++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
++fi
+
+- [case "$target_os" in
++_LT_CC_BASENAME([$compiler])
+
+- linux)
+- ac_libnet_have_packet_socket = no
+- ;;
+- *)
++# Only perform the check for file, if the check method requires it
++case $deplibs_check_method in
++file_magic*)
++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++ AC_PATH_MAGIC
++ fi
++ ;;
++esac
+
+- cat > pf_packet-test.c << EOF
+-#include <stdio.h>
+-#include <errno.h>
+-#include <stdlib.h>
+-#include <netinet/in.h>
+-#include <sys/socket.h>
+-#include <features.h> /* for the glibc version number */
+-#if __GLIBC__ >= 2 && __GLIBC_MINOR >= 1
+-#include <netpacket/packet.h>
+-#include <net/ethernet.h> /* the L2 protocols */
+-#else
+-#include <asm/types.h>
+-#include <linux/if_packet.h>
+-#include <linux/if_ether.h> /* The L2 protocols */
+-#endif
+-
+-#ifndef SOL_PACKET
+-#define SOL_PACKET 263
+-#endif /* SOL_PACKET */
+-
+-int
+-main(int argc, char **argv)
+-{
+- int fd;
+-
+- fd = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+- if (fd == -1)
+- {
+- if (errno == EPERM)
+- {
+- /* user's UID != 0 */
+- printf("probably");
+- exit (EXIT_FAILURE);
+- }
+- printf("no");
+- exit (EXIT_FAILURE);
+- }
+- printf("yes");
+- exit (EXIT_SUCCESS);
+-}
+-EOF
+- ${CC-cc} -o pf_packet-test $CFLAGS pf_packet-test.c >/dev/null 2>&1
++AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++enable_win32_dll=yes, enable_win32_dll=no)
++
++AC_ARG_ENABLE([libtool-lock],
++ [AC_HELP_STRING([--disable-libtool-lock],
++ [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++AC_ARG_WITH([pic],
++ [AC_HELP_STRING([--with-pic],
++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++ [pic_mode="$withval"],
++ [pic_mode=default])
++test -z "$pic_mode" && pic_mode=default
++
++# Use C for the default configuration in the libtool script
++tagname=
++AC_LIBTOOL_LANG_C_CONFIG
++_LT_AC_TAGCONFIG
++])# AC_LIBTOOL_SETUP
++
++
++# _LT_AC_SYS_COMPILER
++# -------------------
++AC_DEFUN([_LT_AC_SYS_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_AC_SYS_COMPILER
++
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
++AC_DEFUN([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++ case $cc_temp in
++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++])
+
+- # Oopz 4.3 BSD doesn't have this. Sorry.
+- if test ! -x ./pf_packet-test ; then
+- ac_libnet_have_packet_socket=choked
+- else
+- ac_libnet_have_packet_socket=`./pf_packet-test`;
+- fi
+- if test $ac_libnet_have_packet_socket = choked; then
+- AC_MSG_RESULT(test program compile choked... assuming no)
+- elif test $ac_libnet_have_packet_socket = yes; then
+- AC_MSG_RESULT(yes)
+- elif test $ac_libnet_have_packet_socket = probably; then
+- AC_MSG_RESULT(test program got EPERM... assuming yes)
+- elif test $ac_libnet_have_packet_socket = no; then
+- AC_MSG_RESULT(no)
+- fi
+
+- rm -f pf_packet-test* core core.pf_packet-test
+- ;;
+- esac])
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++AC_DEFUN([_LT_COMPILER_BOILERPLATE],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_COMPILER_BOILERPLATE
+
+- if test $ac_libnet_have_packet_socket = yes -o $ac_libnet_have_packet_socket = probably; then
+- AC_DEFINE(HAVE_PACKET_SOCKET)
+- fi
+-])
+
+-dnl
+-dnl Looks for a previous libnet version and attempts to determine which verion
+-dnl it is. Version 0.8 was the first version that actually knew internally
+-dnl what version it was.
+-dnl
+-dnl usage:
+-dnl
+-dnl AC_LIBNET_CHECK_LIBNET_VERSION
+-dnl
+-dnl results:
+-dnl
+-dnl
+-dnl
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++AC_DEFUN([_LT_LINKER_BOILERPLATE],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_LINKER_BOILERPLATE
+
+-AC_DEFUN(AC_LIBNET_CHECK_LIBNET_VER,
+-[
+- AC_CHECK_LIB(net, libnet_build_ip, AC_MSG_CHECKING(version) \
+
+-changequote(<<, >>)dnl
+- if [[ ! -f $LIB_PREFIX/libnet.a ]] ; then
+-changequote([, ])dnl
+- AC_MSG_RESULT($LIB_PREFIX/libnet.a doesn't exist)
+- AC_MSG_RESULT(previous libnet install lives elsewhere, you should probably find it)
+- else
+- __LIBNET_VERSION=`strings $LIB_PREFIX/libnet.a | grep "libnet version"\
+- | cut -f3 -d" "`;\
+- if test -z "$__LIBNET_VERSION"; then
+- AC_MSG_RESULT(<0.8)
+- else
+- AC_MSG_RESULT($__LIBNET_VERSION)
+- fi
+- fi\
+- )
+-])
++# _LT_AC_SYS_LIBPATH_AIX
++# ----------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_LINK_IFELSE(AC_LANG_PROGRAM,[
++lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\(.*\)$/\1/
++ p
++ }
++ }'
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then
++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++fi],[])
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++])# _LT_AC_SYS_LIBPATH_AIX
+
+
+-dnl
+-dnl Checks to see if this linux kernel uses ip_sum or ip_csum
+-dnl (Pulled from queso)
+-dnl
+-dnl usage:
+-dnl
+-dnl AC_LIBNET_CHECK_IP_CSUM
+-dnl
+-dnl results:
+-dnl
+-dnl HAVE_STRUCT_IP_CSUM (DEFINED)
+-dnl
++# _LT_AC_SHELL_INIT(ARG)
++# ----------------------
++AC_DEFUN([_LT_AC_SHELL_INIT],
++[ifdef([AC_DIVERSION_NOTICE],
++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
++ [AC_DIVERT_PUSH(NOTICE)])
++$1
++AC_DIVERT_POP
++])# _LT_AC_SHELL_INIT
++
++
++# _LT_AC_PROG_ECHO_BACKSLASH
++# --------------------------
++# Add some code to the start of the generated configure script which
++# will find an echo command which doesn't interpret backslashes.
++AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
++[_LT_AC_SHELL_INIT([
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++case X$ECHO in
++X*--fallback-echo)
++ # Remove one level of quotation (which was required for Make).
++ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
++ ;;
++esac
++
++echo=${ECHO-echo}
++if test "X[$]1" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++elif test "X[$]1" = X--fallback-echo; then
++ # Avoid inline document here, it may be left over
++ :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
++ # Yippee, $echo works!
++ :
++else
++ # Restart under the correct shell.
++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
++fi
+
+-AC_DEFUN(AC_LIBNET_CHECK_IP_CSUM,
+-[
+- AC_MSG_CHECKING([struct ip contains ip_csum])
+- AC_TRY_COMPILE([
+- #define __BSD_SOURCE
+- #define _BSD_SOURCE
+- #include <sys/types.h>
+- #include <netinet/in.h>
+- #include <netinet/in_systm.h>
+- #include <netinet/ip.h>],
+- [
+- struct ip ip;
+- ip.ip_csum = 0;
+- ],
+- [AC_MSG_RESULT(yes);
+- AC_DEFINE(HAVE_STRUCT_IP_CSUM)],
+- [AC_MSG_RESULT(no);
+- ])
+-])
++if test "X[$]1" = X--fallback-echo; then
++ # used as fallback echo
++ shift
++ cat <<EOF
++[$]*
++EOF
++ exit 0
++fi
+
+-dnl
+-dnl Checks to see if unaligned memory accesses fail
+-dnl (Pulled from libpcap)
+-dnl
+-dnl usage:
+-dnl
+-dnl AC_LBL_UNALIGNED_ACCESS
+-dnl
+-dnl results:
+-dnl
+-dnl LBL_ALIGN (DEFINED)
+-dnl
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++if test -z "$ECHO"; then
++if test "X${echo_test_string+set}" != Xset; then
++# find a string as large as possible, as long as the shell can cope with it
++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
++ echo_test_string=`eval $cmd` &&
++ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
++ then
++ break
++ fi
++ done
++fi
+
+-AC_DEFUN(AC_LBL_UNALIGNED_ACCESS,
+- [AC_MSG_CHECKING(if unaligned accesses fail)
+- AC_CACHE_VAL(ac_cv_lbl_unaligned_fail,
+- [case "$target_cpu" in
+-
+- alpha|hp*|mips|sparc)
+- ac_cv_lbl_unaligned_fail=yes
+- ;;
+-
+- *)
+- cat >conftest.c <<EOF
+-# include <sys/types.h>
+-# include <sys/wait.h>
+-# include <stdio.h>
+- unsigned char a[[5]] = { 1, 2, 3, 4, 5 };
+- main()
+- {
+- unsigned int i;
+- pid_t pid;
+- int status;
+- /* avoid "core dumped" message */
+- pid = fork();
+- if (pid < 0)
+- {
+- exit(2);
+- }
+- if (pid > 0)
+- {
+- /* parent */
+- pid = waitpid(pid, &status, 0);
+- if (pid < 0)
+- {
+- exit(3);
+- }
+- exit(!WIFEXITED(status));
+- }
+- /* child */
+- i = *(unsigned int *)&a[[1]];
+- printf("%d\n", i);
+- exit(0);
+- }
+-EOF
+- ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS \
+- conftest.c $LIBS > /dev/null 2>&1
+- # Oopz 4.3 BSD doesn't have this. Sorry.
+- if test ! -x conftest ; then
+- dnl failed to compile for some reason
+- ac_cv_lbl_unaligned_fail=yes
+- else
+- ./conftest > conftest.out
+- if test ! -s conftest.out ; then
+- ac_cv_lbl_unaligned_fail=yes
+- else
+- ac_cv_lbl_unaligned_fail=no
+- fi
+- fi
+- rm -f conftest* core core.conftest
+- ;;
+- esac])
+- AC_MSG_RESULT($ac_cv_lbl_unaligned_fail)
+- if test $ac_cv_lbl_unaligned_fail = yes ; then
+- AC_DEFINE(LBL_ALIGN)
++if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ :
++else
++ # The Solaris, AIX, and Digital Unix default echo programs unquote
++ # backslashes. This makes it impossible to quote backslashes using
++ # echo "$something" | sed 's/\\/\\\\/g'
++ #
++ # So, first we look for a working echo in the user's PATH.
++
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for dir in $PATH /usr/ucb; do
++ IFS="$lt_save_ifs"
++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ echo="$dir/echo"
++ break
+ fi
+-])
++ done
++ IFS="$lt_save_ifs"
+
++ if test "X$echo" = Xecho; then
++ # We didn't find a better echo, so look for alternatives.
++ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # This shell has a builtin print -r that does the trick.
++ echo='print -r'
++ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
++ test "X$CONFIG_SHELL" != X/bin/ksh; then
++ # If we have ksh, try running configure again with it.
++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++ export ORIGINAL_CONFIG_SHELL
++ CONFIG_SHELL=/bin/ksh
++ export CONFIG_SHELL
++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
++ else
++ # Try using printf.
++ echo='printf %s\n'
++ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # Cool, printf works
++ :
++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++ export CONFIG_SHELL
++ SHELL="$CONFIG_SHELL"
++ export SHELL
++ echo="$CONFIG_SHELL [$]0 --fallback-echo"
++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ echo="$CONFIG_SHELL [$]0 --fallback-echo"
++ else
++ # maybe with a smaller string...
++ prev=:
+
+-dnl
+-dnl Checks endianess
+-dnl
+-dnl usage:
+-dnl
+-dnl AC_LIBNET_ENDIAN_CHECK
+-dnl
+-dnl results:
+-dnl
+-dnl LIBNET_BIG_ENDIAN = 1 or
+-dnl LIBNET_LIL_ENDIAN = 1
+-dnl
++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
++ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
++ then
++ break
++ fi
++ prev="$cmd"
++ done
++
++ if test "$prev" != 'sed 50q "[$]0"'; then
++ echo_test_string=`eval $prev`
++ export echo_test_string
++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
++ else
++ # Oops. We lost completely, so just stick with echo.
++ echo=echo
++ fi
++ fi
++ fi
++ fi
++fi
++fi
+
+-AC_DEFUN(AC_LIBNET_ENDIAN_CHECK,
+- [AC_MSG_CHECKING(machine endianess)
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++ECHO=$echo
++if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
++ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
++fi
+
+- cat > conftest.c << EOF
+-# include <stdio.h>
+-# include <stdlib.h>
+-
+- int main()
+- {
+- union
+- {
+- short s;
+- char c[[sizeof(short)]];
+- } un;
+-
+- un.s = 0x0102;
+- if (sizeof (short) == 2)
+- {
+- if (un.c [[0]] == 1 && un.c [[1]] == 2)
+- {
+- printf("B\n");
+- }
+- else
+- {
+- if (un.c [[0]] == 2 && un.c [[1]] == 1)
+- {
+- printf("L\n");
+- }
+- }
+- }
+- else
+- {
+- printf("?\n");
+- }
+- return (EXIT_SUCCESS);
+- }
+-EOF
+- ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS > /dev/null 2>&1
+- # Oopz 4.3 BSD doesn't have this. Sorry.
+- if test ! -x conftest ; then
+-dnl failed to compile for some reason
+- ac_cv_libnet_endianess=unknown
+- else
+- ./conftest > conftest.out
+- result=`cat conftest.out`
+- if test $result = "B"; then
+- ac_cv_libnet_endianess=big
+- elif test $result = "L"; then
+- ac_cv_libnet_endianess=lil
+- else
+- ac_cv_libnet_endianess=unknown
+- fi
+- fi
+- rm -f conftest* core core.conftest
++AC_SUBST(ECHO)
++])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+- AC_MSG_RESULT($ac_cv_libnet_endianess)
+
+- if test $ac_cv_libnet_endianess = big ; then
+- AC_DEFINE(LIBNET_BIG_ENDIAN)
+- ENDIANESS="LIBNET_BIG_ENDIAN"
+- LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_BIG_ENDIAN"
+- elif test $ac_cv_libnet_endianess = lil ; then
+- AC_DEFINE(LIBNET_LIL_ENDIAN)
+- ENDIANESS="LIBNET_LIL_ENDIAN"
+- LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_LIL_ENDIAN"
+- fi
+- ])
++# _LT_AC_LOCK
++# -----------
++AC_DEFUN([_LT_AC_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++ [AC_HELP_STRING([--disable-libtool-lock],
++ [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *ELF-32*)
++ HPUX_IA64_MODE="32"
++ ;;
++ *ELF-64*)
++ HPUX_IA64_MODE="64"
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++*-*-irix6*)
++ # Find out which ABI we are using.
++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -melf32bsmip"
++ ;;
++ *N32*)
++ LD="${LD-ld} -melf32bmipn32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -melf64bmip"
++ ;;
++ esac
++ else
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -32"
++ ;;
++ *N32*)
++ LD="${LD-ld} -n32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -64"
++ ;;
++ esac
++ fi
++ fi
++ rm -rf conftest*
++ ;;
+
+-dnl
+-dnl Improved version of AC_CHECK_LIB
+-dnl
+-dnl Thanks to John Hawkinson (jhawk at mit.edu)
+-dnl
+-dnl usage:
+-dnl
+-dnl AC_LBL_CHECK_LIB(LIBRARY, FUNCTION [, ACTION-IF-FOUND [,
+-dnl ACTION-IF-NOT-FOUND [, OTHER-LIBRARIES]]])
+-dnl
+-dnl results:
+-dnl
+-dnl LIBS
+-dnl
+-
+-define(AC_LBL_CHECK_LIB,
+-[AC_MSG_CHECKING([for $2 in -l$1])
+-dnl Use a cache variable name containing both the library and function name,
+-dnl because the test really is for library $1 defining function $2, not
+-dnl just for library $1. Separate tests with the same $1 and different $2's
+-dnl may have different results.
+-ac_lib_var=`echo $1['_']$2['_']$5 | sed 'y%./+- %__p__%'`
+-AC_CACHE_VAL(ac_cv_lbl_lib_$ac_lib_var,
+-[ac_save_LIBS="$LIBS"
+-LIBS="-l$1 $5 $LIBS"
+-AC_TRY_LINK(dnl
+-ifelse([$2], [main], , dnl Avoid conflicting decl of main.
+-[/* Override any gcc2 internal prototype to avoid an error. */
+-]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
+-extern "C"
+-#endif
+-])dnl
+-[/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $2();
+-]),
+- [$2()],
+- eval "ac_cv_lbl_lib_$ac_lib_var=yes",
+- eval "ac_cv_lbl_lib_$ac_lib_var=no")
+-LIBS="$ac_save_LIBS"
+-])dnl
+-if eval "test \"`echo '$ac_cv_lbl_lib_'$ac_lib_var`\" = yes"; then
+- AC_MSG_RESULT(yes)
+- ifelse([$3], ,
+-[changequote(, )dnl
+- ac_tr_lib=HAVE_LIB`echo $1 | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+-changequote([, ])dnl
+- AC_DEFINE_UNQUOTED($ac_tr_lib)
+- LIBS="-l$1 $LIBS"
+-], [$3])
+-else
+- AC_MSG_RESULT(no)
+-ifelse([$4], , , [$4
+-])dnl
+-fi
+-])
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|sparc*-*linux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *32-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_i386_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_i386"
++ ;;
++ ppc64-*linux*|powerpc64-*linux*)
++ LD="${LD-ld} -m elf32ppclinux"
++ ;;
++ s390x-*linux*)
++ LD="${LD-ld} -m elf_s390"
++ ;;
++ sparc64-*linux*)
++ LD="${LD-ld} -m elf32_sparc"
++ ;;
++ esac
++ ;;
++ *64-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_x86_64_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_x86_64"
++ ;;
++ ppc*-*linux*|powerpc*-*linux*)
++ LD="${LD-ld} -m elf64ppc"
++ ;;
++ s390*-*linux*)
++ LD="${LD-ld} -m elf64_s390"
++ ;;
++ sparc*-*linux*)
++ LD="${LD-ld} -m elf64_sparc"
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
+
+-dnl
+-dnl AC_LBL_LIBRARY_NET
+-dnl
+-dnl This test is for network applications that need socket() and
+-dnl gethostbyname() -ish functions. Under Solaris, those applications
+-dnl need to link with "-lsocket -lnsl". Under IRIX, they need to link
+-dnl with "-lnsl" but should *not* link with "-lsocket" because
+-dnl libsocket.a breaks a number of things (for instance:
+-dnl gethostbyname() under IRIX 5.2, and snoop sockets under most
+-dnl versions of IRIX).
+-dnl
+-dnl Unfortunately, many application developers are not aware of this,
+-dnl and mistakenly write tests that cause -lsocket to be used under
+-dnl IRIX. It is also easy to write tests that cause -lnsl to be used
+-dnl under operating systems where neither are necessary (or useful),
+-dnl such as SunOS 4.1.4, which uses -lnsl for TLI.
+-dnl
+-dnl This test exists so that every application developer does not test
+-dnl this in a different, and subtly broken fashion.
+-
+-dnl It has been argued that this test should be broken up into two
+-dnl seperate tests, one for the resolver libraries, and one for the
+-dnl libraries necessary for using Sockets API. Unfortunately, the two
+-dnl are carefully intertwined and allowing the autoconf user to use
+-dnl them independantly potentially results in unfortunate ordering
+-dnl dependancies -- as such, such component macros would have to
+-dnl carefully use indirection and be aware if the other components were
+-dnl executed. Since other autoconf macros do not go to this trouble,
+-dnl and almost no applications use sockets without the resolver, this
+-dnl complexity has not been implemented.
+-dnl
+-dnl The check for libresolv is in case you are attempting to link
+-dnl statically and happen to have a libresolv.a lying around (and no
+-dnl libnsl.a).
+-dnl
+-AC_DEFUN(AC_LBL_LIBRARY_NET, [
+- # Most operating systems have gethostbyname() in the default searched
+- # libraries (i.e. libc):
+- AC_CHECK_FUNC(gethostbyname, ,
+- # Some OSes (eg. Solaris) place it in libnsl:
+- AC_LBL_CHECK_LIB(nsl, gethostbyname, ,
+- # Some strange OSes (SINIX) have it in libsocket:
+- AC_LBL_CHECK_LIB(socket, gethostbyname, ,
+- # Unfortunately libsocket sometimes depends on libnsl.
+- # AC_CHECK_LIB's API is essentially broken so the
+- # following ugliness is necessary:
+- AC_LBL_CHECK_LIB(socket, gethostbyname,
+- LIBS="-lsocket -lnsl $LIBS",
+- AC_CHECK_LIB(resolv, gethostbyname),
+- -lnsl))))
+- AC_CHECK_FUNC(socket, , AC_CHECK_LIB(socket, socket, ,
+- AC_LBL_CHECK_LIB(socket, socket, LIBS="-lsocket -lnsl $LIBS", ,
+- -lnsl)))
+- # DLPI needs putmsg under HPUX so test for -lstr while we're at it
+- AC_CHECK_LIB(str, putmsg)
+- ])
++*-*-sco3.2v5*)
++ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++ SAVE_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS -belf"
++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++ [AC_LANG_PUSH(C)
++ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++ AC_LANG_POP])
++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++ CFLAGS="$SAVE_CFLAGS"
++ fi
++ ;;
++sparc*-*solaris*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *64-bit*)
++ case $lt_cv_prog_gnu_ld in
++ yes*) LD="${LD-ld} -m elf64_sparc" ;;
++ *) LD="${LD-ld} -64" ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
+
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
++ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++ AC_CHECK_TOOL(AS, as, false)
++ AC_CHECK_TOOL(OBJDUMP, objdump, false)
++ ;;
++ ])
++esac
++
++need_locks="$enable_libtool_lock"
++
++])# _LT_AC_LOCK
++
++
++# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
++[AC_REQUIRE([LT_AC_PROG_SED])
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++ lt_compiler_flag="$3"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ # The option is referenced via a variable to avoid confusing sed.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>conftest.err)
++ ac_status=$?
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s "$ac_outfile"; then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings other than the usual output.
++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
++ fi
++ $rm conftest*
++])
+
+-# Do all the work for Automake. -*- Autoconf -*-
++if test x"[$]$2" = xyes; then
++ ifelse([$5], , :, [$5])
++else
++ ifelse([$6], , :, [$6])
++fi
++])# AC_LIBTOOL_COMPILER_OPTION
+
+-# This macro actually does too much some checks are only needed if
+-# your package does certain things. But this isn't really a big deal.
+
+-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
+-# Free Software Foundation, Inc.
++# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [ACTION-SUCCESS], [ACTION-FAILURE])
++# ------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS $3"
++ echo "$lt_simple_link_test_code" > conftest.$ac_ext
++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++ # The linker can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ if test -s conftest.err; then
++ # Append any errors to the config.log.
++ cat conftest.err 1>&AS_MESSAGE_LOG_FD
++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
++ else
++ $2=yes
++ fi
++ fi
++ $rm conftest*
++ LDFLAGS="$save_LDFLAGS"
++])
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
++if test x"[$]$2" = xyes; then
++ ifelse([$4], , :, [$4])
++else
++ ifelse([$5], , :, [$5])
++fi
++])# AC_LIBTOOL_LINKER_OPTION
+
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# AC_LIBTOOL_SYS_MAX_CMD_LEN
++# --------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
++[# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++ i=0
++ teststring="ABCD"
++
++ case $build_os in
++ msdosdjgpp*)
++ # On DJGPP, this test can blow up pretty badly due to problems in libc
++ # (any single argument exceeding 2000 bytes causes a buffer overrun
++ # during glob expansion). Even if it were fixed, the result of this
++ # check would be larger than it should be.
++ lt_cv_sys_max_cmd_len=12288; # 12K is about right
++ ;;
+
+-# serial 8
++ gnu*)
++ # Under GNU Hurd, this test is not required because there is
++ # no limit to the length of command line arguments.
++ # Libtool will interpret -1 as no limit whatsoever
++ lt_cv_sys_max_cmd_len=-1;
++ ;;
+
+-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+-# written in clear, in which case automake, when reading aclocal.m4,
+-# will think it sees a *use*, and therefore will trigger all it's
+-# C support machinery. Also note that it means that autoscan, seeing
+-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++ cygwin* | mingw*)
++ # On Win9x/ME, this test blows up -- it succeeds, but takes
++ # about 5 minutes as the teststring grows exponentially.
++ # Worse, since 9x/ME are not pre-emptively multitasking,
++ # you end up with a "frozen" computer, even though with patience
++ # the test eventually succeeds (with a max line length of 256k).
++ # Instead, let's just punt: use the minimum linelength reported by
++ # all of the supported platforms: 8192 (on NT/2K/XP).
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
+
++ amigaos*)
++ # On AmigaOS with pdksh, this test takes hours, literally.
++ # So we just punt and use a minimum line length of 8192.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
+
+-AC_PREREQ([2.52])
++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++ # This has been around since 386BSD, at least. Likely further.
++ if test -x /sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++ elif test -x /usr/sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++ else
++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
++ fi
++ # And add a safety zone
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ ;;
+
+-# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
+-# the ones we care about.
+-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++ interix*)
++ # We know the value 262144 and hardcode it with a safety zone (like BSD)
++ lt_cv_sys_max_cmd_len=196608
++ ;;
+
+-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+-# AM_INIT_AUTOMAKE([OPTIONS])
+-# -----------------------------------------------
+-# The call with PACKAGE and VERSION arguments is the old style
+-# call (pre autoconf-2.50), which is being phased out. PACKAGE
+-# and VERSION should now be passed to AC_INIT and removed from
+-# the call to AM_INIT_AUTOMAKE.
+-# We support both call styles for the transition. After
+-# the next Automake release, Autoconf can make the AC_INIT
+-# arguments mandatory, and then we can depend on a new Autoconf
+-# release and drop the old call support.
+-AC_DEFUN([AM_INIT_AUTOMAKE],
+-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+- AC_REQUIRE([AC_PROG_INSTALL])dnl
+-# test to see if srcdir already configured
+-if test "`cd $srcdir && pwd`" != "`pwd`" &&
+- test -f $srcdir/config.status; then
+- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++ osf*)
++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++ # nice to cause kernel panics so lets avoid the loop below.
++ # First set a reasonable default.
++ lt_cv_sys_max_cmd_len=16384
++ #
++ if test -x /sbin/sysconfig; then
++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++ *1*) lt_cv_sys_max_cmd_len=-1 ;;
++ esac
++ fi
++ ;;
++ sco3.2v5*)
++ lt_cv_sys_max_cmd_len=102400
++ ;;
++ sysv5* | sco5v6* | sysv4.2uw2*)
++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++ if test -n "$kargmax"; then
++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
++ else
++ lt_cv_sys_max_cmd_len=32768
++ fi
++ ;;
++ *)
++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++ if test -n "$lt_cv_sys_max_cmd_len"; then
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ else
++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
++ = "XX$teststring") >/dev/null 2>&1 &&
++ new_result=`expr "X$teststring" : ".*" 2>&1` &&
++ lt_cv_sys_max_cmd_len=$new_result &&
++ test $i != 17 # 1/2 MB should be enough
++ do
++ i=`expr $i + 1`
++ teststring=$teststring$teststring
++ done
++ teststring=
++ # Add a significant safety factor because C++ compilers can tack on massive
++ # amounts of additional arguments before passing them to the linker.
++ # It appears as though 1/2 is a usable value.
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ fi
++ ;;
++ esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++ AC_MSG_RESULT(none)
+ fi
++])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+-# Define the identity of the package.
+-dnl Distinguish between old-style and new-style calls.
+-m4_ifval([$2],
+-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+- AC_SUBST([PACKAGE], [$1])dnl
+- AC_SUBST([VERSION], [$2])],
+-[_AM_SET_OPTIONS([$1])dnl
+- AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl
+- AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl
+
+-_AM_IF_OPTION([no-define],,
+-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++# _LT_AC_CHECK_DLFCN
++# ------------------
++AC_DEFUN([_LT_AC_CHECK_DLFCN],
++[AC_CHECK_HEADERS(dlfcn.h)dnl
++])# _LT_AC_CHECK_DLFCN
+
+-# Some tools Automake needs.
+-AC_REQUIRE([AM_SANITY_CHECK])dnl
+-AC_REQUIRE([AC_ARG_PROGRAM])dnl
+-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+-AM_MISSING_PROG(AUTOCONF, autoconf)
+-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+-AM_MISSING_PROG(AUTOHEADER, autoheader)
+-AM_MISSING_PROG(MAKEINFO, makeinfo)
+-AM_MISSING_PROG(AMTAR, tar)
+-AM_PROG_INSTALL_SH
+-AM_PROG_INSTALL_STRIP
+-# We need awk for the "check" target. The system "awk" is bad on
+-# some platforms.
+-AC_REQUIRE([AC_PROG_AWK])dnl
+-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+
+-_AM_IF_OPTION([no-dependencies],,
+-[AC_PROVIDE_IFELSE([AC_PROG_][CC],
+- [_AM_DEPENDENCIES(CC)],
+- [define([AC_PROG_][CC],
+- defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
+-AC_PROVIDE_IFELSE([AC_PROG_][CXX],
+- [_AM_DEPENDENCIES(CXX)],
+- [define([AC_PROG_][CXX],
+- defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+-])
+-])
++# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ---------------------------------------------------------------------
++AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++ [$4]
++else
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<EOF
++[#line __oline__ "configure"
++#include "confdefs.h"
+
+-# Copyright 2002 Free Software Foundation, Inc.
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
++#include <stdio.h>
+
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
+
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
+
+-# AM_AUTOMAKE_VERSION(VERSION)
+-# ----------------------------
+-# Automake X.Y traces this macro to ensure aclocal.m4 has been
+-# generated from the m4 files accompanying Automake X.Y.
+-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"])
++#ifdef __cplusplus
++extern "C" void exit (int);
++#endif
+
+-# AM_SET_CURRENT_AUTOMAKE_VERSION
+-# -------------------------------
+-# Call AM_AUTOMAKE_VERSION so it can be traced.
+-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+- [AM_AUTOMAKE_VERSION([1.6.3])])
++void fnord() { int i=42;}
++int main ()
++{
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
+
+-# Helper functions for option handling. -*- Autoconf -*-
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
+
+-# Copyright 2001, 2002 Free Software Foundation, Inc.
++ exit (status);
++}]
++EOF
++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) $1 ;;
++ x$lt_dlneed_uscore) $2 ;;
++ x$lt_dlunknown|x*) $3 ;;
++ esac
++ else :
++ # compilation failed
++ $3
++ fi
++fi
++rm -fr conftest*
++])# _LT_AC_TRY_DLOPEN_SELF
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
++# AC_LIBTOOL_DLOPEN_SELF
++# ----------------------
++AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++ enable_dlopen=unknown
++ enable_dlopen_self=unknown
++ enable_dlopen_self_static=unknown
++else
++ lt_cv_dlopen=no
++ lt_cv_dlopen_libs=
++
++ case $host_os in
++ beos*)
++ lt_cv_dlopen="load_add_on"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ;;
++
++ mingw* | pw32*)
++ lt_cv_dlopen="LoadLibrary"
++ lt_cv_dlopen_libs=
++ ;;
++
++ cygwin*)
++ lt_cv_dlopen="dlopen"
++ lt_cv_dlopen_libs=
++ ;;
++
++ darwin*)
++ # if libdl is installed we need to link against it
++ AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++ lt_cv_dlopen="dyld"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ])
++ ;;
++
++ *)
++ AC_CHECK_FUNC([shl_load],
++ [lt_cv_dlopen="shl_load"],
++ [AC_CHECK_LIB([dld], [shl_load],
++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
++ [AC_CHECK_FUNC([dlopen],
++ [lt_cv_dlopen="dlopen"],
++ [AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++ [AC_CHECK_LIB([svld], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++ [AC_CHECK_LIB([dld], [dld_link],
++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
++ ])
++ ])
++ ])
++ ])
++ ])
++ ;;
++ esac
++
++ if test "x$lt_cv_dlopen" != xno; then
++ enable_dlopen=yes
++ else
++ enable_dlopen=no
++ fi
++
++ case $lt_cv_dlopen in
++ dlopen)
++ save_CPPFLAGS="$CPPFLAGS"
++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++ save_LDFLAGS="$LDFLAGS"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++ save_LIBS="$LIBS"
++ LIBS="$lt_cv_dlopen_libs $LIBS"
++
++ AC_CACHE_CHECK([whether a program can dlopen itself],
++ lt_cv_dlopen_self, [dnl
++ _LT_AC_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
++ ])
++
++ if test "x$lt_cv_dlopen_self" = xyes; then
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++ lt_cv_dlopen_self_static, [dnl
++ _LT_AC_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
++ ])
++ fi
++
++ CPPFLAGS="$save_CPPFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++ LIBS="$save_LIBS"
++ ;;
++ esac
++
++ case $lt_cv_dlopen_self in
++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++ *) enable_dlopen_self=unknown ;;
++ esac
++
++ case $lt_cv_dlopen_self_static in
++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++ *) enable_dlopen_self_static=unknown ;;
++ esac
++fi
++])# AC_LIBTOOL_DLOPEN_SELF
++
++
++# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
++# ---------------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler
++AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++ $rm -r conftest 2>/dev/null
++ mkdir conftest
++ cd conftest
++ mkdir out
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ lt_compiler_flag="-o out/conftest2.$ac_objext"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>out/conftest.err)
++ ac_status=$?
++ cat out/conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s out/conftest2.$ac_objext
++ then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++ fi
++ fi
++ chmod u+w . 2>&AS_MESSAGE_LOG_FD
++ $rm conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++ $rm out/* && rmdir out
++ cd ..
++ rmdir conftest
++ $rm conftest*
++])
++])# AC_LIBTOOL_PROG_CC_C_O
++
++
++# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
++# -----------------------------------------
++# Check to see if we can do hard links to lock some files if needed
++AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
++[AC_REQUIRE([_LT_AC_LOCK])dnl
++
++hard_links="nottested"
++if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++ # do not overwrite the value of need_locks provided by the user
++ AC_MSG_CHECKING([if we can lock with hard links])
++ hard_links=yes
++ $rm conftest*
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ touch conftest.a
++ ln conftest.a conftest.b 2>&5 || hard_links=no
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ AC_MSG_RESULT([$hard_links])
++ if test "$hard_links" = no; then
++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++ need_locks=warn
++ fi
++else
++ need_locks=no
++fi
++])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
++
++
++# AC_LIBTOOL_OBJDIR
++# -----------------
++AC_DEFUN([AC_LIBTOOL_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++ lt_cv_objdir=.libs
++else
++ # MS-DOS does not allow filenames that begin with a dot.
++ lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++])# AC_LIBTOOL_OBJDIR
++
++
++# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
++# ----------------------------------------------
++# Check hardcoding attributes.
++AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_AC_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
++ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
++ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
++
++ # We can hardcode non-existant directories.
++ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
++ # If the only mechanism to avoid hardcoding is shlibpath_var, we
++ # have to relink, otherwise we might link with an installed library
++ # when we should be linking with a yet-to-be-installed one
++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
++ # Linking always hardcodes the temporary library directory.
++ _LT_AC_TAGVAR(hardcode_action, $1)=relink
++ else
++ # We can link without hardcoding, and we can hardcode nonexisting dirs.
++ _LT_AC_TAGVAR(hardcode_action, $1)=immediate
++ fi
++else
++ # We cannot hardcode anything, or else we can only hardcode existing
++ # directories.
++ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
++
++if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
++ # Fast installation is not supported
++ enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++ test "$enable_shared" = no; then
++ # Fast installation is not necessary
++ enable_fast_install=needless
++fi
++])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
++
++
++# AC_LIBTOOL_SYS_LIB_STRIP
++# ------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
++[striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++ AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++ case $host_os in
++ darwin*)
++ if test -n "$STRIP" ; then
++ striplib="$STRIP -x"
++ old_striplib="$STRIP -S"
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
++fi
++ ;;
++ *)
++ AC_MSG_RESULT([no])
++ ;;
++ esac
++fi
++])# AC_LIBTOOL_SYS_LIB_STRIP
++
++
++# AC_LIBTOOL_SYS_DYNAMIC_LINKER
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_MSG_CHECKING([dynamic linker characteristics])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++m4_if($1,[],[
++if test "$GCC" = yes; then
++ case $host_os in
++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++ *) lt_awk_arg="/^libraries:/" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
++ # if the path contains ";" then we assume it to be the separator
++ # otherwise default to the standard path separator (i.e. ":") - it is
++ # assumed that no part of a normal pathname contains ";" but that should
++ # okay in the real world where ";" in dirpaths is itself problematic.
++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # Ok, now we have the path, separated by spaces, we can step through it
++ # and add multilib dir if necessary.
++ lt_tmp_lt_search_path_spec=
++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++ for lt_sys_path in $lt_search_path_spec; do
++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++ else
++ test -d "$lt_sys_path" && \
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++ fi
++ done
++ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++ lt_foo="";
++ lt_count=0;
++ for (lt_i = NF; lt_i > 0; lt_i--) {
++ if ($lt_i != "" && $lt_i != ".") {
++ if ($lt_i == "..") {
++ lt_count++;
++ } else {
++ if (lt_count == 0) {
++ lt_foo="/" $lt_i lt_foo;
++ } else {
++ lt_count--;
++ }
++ }
++ }
++ }
++ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
++}'`
++ sys_lib_search_path_spec=`echo $lt_search_path_spec`
++else
++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi])
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++ shlibpath_var=LIBPATH
++
++ # AIX 3 has no versioning support, so we append a major version to the name.
++ soname_spec='${libname}${release}${shared_ext}$major'
++ ;;
++
++aix4* | aix5*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ hardcode_into_libs=yes
++ if test "$host_cpu" = ia64; then
++ # AIX 5 supports IA64
++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ else
++ # With GCC up to 2.95.x, collect2 would create an import file
++ # for dependence libraries. The import file would start with
++ # the line `#! .'. This would cause the generated library to
++ # depend on `.', always an invalid library. This was fixed in
++ # development snapshots of GCC prior to 3.0.
++ case $host_os in
++ aix4 | aix4.[[01]] | aix4.[[01]].*)
++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++ echo ' yes '
++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++ :
++ else
++ can_build_shared=no
++ fi
++ ;;
++ esac
++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++ # soname into executable. Probably we can add versioning support to
++ # collect2, so additional links can be useful in future.
++ if test "$aix_use_runtimelinking" = yes; then
++ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++ # instead of lib<name>.a to let people know that these are not
++ # typical AIX shared libraries.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ else
++ # We preserve .a as extension for shared libraries through AIX4.2
++ # and later when we are not doing run time linking.
++ library_names_spec='${libname}${release}.a $libname.a'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ fi
++ shlibpath_var=LIBPATH
++ fi
++ ;;
++
++amigaos*)
++ library_names_spec='$libname.ixlibrary $libname.a'
++ # Create ${libname}_ixlibrary.a entries in /sys/libs.
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++ ;;
++
++beos*)
++ library_names_spec='${libname}${shared_ext}'
++ dynamic_linker="$host_os ld.so"
++ shlibpath_var=LIBRARY_PATH
++ ;;
++
++bsdi[[45]]*)
++ version_type=linux
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++ # the default ld.so.conf also contains /usr/contrib/lib and
++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++ # libtool to hard-code these into programs
++ ;;
++
++cygwin* | mingw* | pw32*)
++ version_type=windows
++ shrext_cmds=".dll"
++ need_version=no
++ need_lib_prefix=no
++
++ case $GCC,$host_os in
++ yes,cygwin* | yes,mingw* | yes,pw32*)
++ library_names_spec='$libname.dll.a'
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
@@ Diff output truncated at 100000 characters. @@
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the devel
mailing list