[csw-devel] SF.net SVN: gar:[4003] csw/mgar/pkg/openssh/trunk/files
chninkel at users.sourceforge.net
chninkel at users.sourceforge.net
Sat Mar 28 00:37:15 CET 2009
Revision: 4003
http://gar.svn.sourceforge.net/gar/?rev=4003&view=rev
Author: chninkel
Date: 2009-03-27 23:37:15 +0000 (Fri, 27 Mar 2009)
Log Message:
-----------
openssh: commit missing LPK files
Added Paths:
-----------
csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.checkinstall
csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.depend
csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.gspec
csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.postinstall
csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.preinstall
csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.prototype
csw/mgar/pkg/openssh/trunk/files/contrib-openssh-lpk-5.1p1-0.3.9.patch
Added: csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.checkinstall
===================================================================
--- csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.checkinstall (rev 0)
+++ csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.checkinstall 2009-03-27 23:37:15 UTC (rev 4003)
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+err=0
+
+if [ `uname -r` = "5.8" ] ; then
+
+if [ ! -c $PKG_ROOT_DIR/dev/random ] ; then
+ echo ERROR: /dev/random must exist
+ err=1
+fi
+
+if [ ! -c $PKG_ROOT_DIR/dev/urandom ] ; then
+ echo ERROR: /dev/urandom must exist
+ err=1
+fi
+
+fi
+
+if [ "$err" = "1" ] ; then
+ echo "For solaris 8 sparc, install patch 112438"
+ echo "For solaris 8 x86, install patch 112439"
+ exit 1
+fi
+
Added: csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.depend
===================================================================
--- csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.depend (rev 0)
+++ csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.depend 2009-03-27 23:37:15 UTC (rev 4003)
@@ -0,0 +1,7 @@
+P CSWosslrt
+P CSWtcpwrap
+P CSWzlib
+P CSWkrb5lib
+P CSWosshclient
+P CSWoldaprt
+I CSWossh
Added: csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.gspec
===================================================================
--- csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.gspec (rev 0)
+++ csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.gspec 2009-03-27 23:37:15 UTC (rev 4003)
@@ -0,0 +1,9 @@
+%var bitname openssh_lpk
+%var pkgname CSWosshlpk
+%include url file://%{PKGLIB}/csw_dyndepend.gspec
+%copyright url file://%{WORKSRC}/LICENCE
+%var SERVICE_CONF_FILES /opt/csw/etc/ssh/sshd_config
+%var RC_INIT_SCRIPT cswopenssh
+%var SMF_MANIFEST cswopenssh.xml
+%var SMF_SCRIPT svc-cswopenssh
+%include url file://%{PKGLIB}/smf_enabled.gspec
Added: csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.postinstall
===================================================================
--- csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.postinstall (rev 0)
+++ csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.postinstall 2009-03-27 23:37:15 UTC (rev 4003)
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# Dirty hack to avoid openssh not being restarted under Solaris 10
+# because of a bug in the previous package (<= 4.6,REV=2007.07.30_rev=p1)
+#
+# we launch a script which will wait for openssh to quit the 'online*'
+# state and then will clear its service state if it is in maintenance
+#
+# we must use ctrun to run this script so it is started under a new
+# contract id and hence is not killed when the ssh service is disabled
+# even if pkg-get/pkgadd was started from an ssh connection
+#
+if [ -f "$BASEDIR/usr/sbin/svccfg" -a -f "$BASEDIR/usr/sbin/svcadm" ]; then
+ /bin/ctrun /opt/csw/share/openssh/openssh_restart_workaround.sh &
+fi
+
+
Added: csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.preinstall
===================================================================
--- csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.preinstall (rev 0)
+++ csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.preinstall 2009-03-27 23:37:15 UTC (rev 4003)
@@ -0,0 +1,44 @@
+#!/bin/sh
+
+
+#checks for /dev/random are done in checkinstall
+
+grep '^sshd:' $PKG_ROOT_DIR/etc/passwd >/dev/null
+if [ $? -ne 0 ] ; then
+ getent passwd sshd >/dev/null
+ if [ $? -ne 0 ] ; then
+ NEEDUSER=1
+ fi
+fi
+
+if [ "$PKG_ROOT_DIR" = "" ] ; then
+ PKG_ROOT_DIR=/
+fi
+
+if [ "$NEEDUSER" = 1 ] ; then
+ echo Adding required sshd user
+ chroot $PKG_ROOT_DIR /usr/sbin/useradd -d /var/run -c 'sshd nonpriv userid' -s /bin/false sshd
+fi
+
+# Configuration file are now under /opt/csw/etc/ssh
+# instead of /opt/csw/etc
+MOVE_CONF_FILE=0
+for FILE in ssh_config sshd_config moduli ssh_host_dsa_key ssh_host_dsa_key.pub ssh_host_rsa_key ssh_host_rsa_key.pub; do
+ if [ -f "$PKG_ROOT_DIR/opt/csw/etc/$FILE" ]; then
+ if [ "$MOVE_CONF_FILE" -eq 0 ]; then
+ echo "WARNING: Openssh configuration files location has been changed !"
+ echo " sshd_config and ssh_config files are now under /opt/csw/etc/ssh."
+ mkdir -p "$PKG_ROOT_DIR/opt/csw/etc/ssh"
+ chown root:bin "$PKG_ROOT_DIR/opt/csw/etc/ssh"
+ MOVE_CONF_FILE=1
+ fi
+ echo "Moving file /opt/csw/etc/$FILE -> /opt/csw/etc/ssh/$FILE ..."
+ mv "$PKG_ROOT_DIR/opt/csw/etc/$FILE" "$PKG_ROOT_DIR/opt/csw/etc/ssh/$FILE"
+ fi
+done
+
+# previous openssh package (< 4.6p1) doesn't stop openssh so we do it ourself
+pkill -15 -P 1 -f "^/opt/csw/sbin/sshd$"
+
+true
+
Added: csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.prototype
===================================================================
--- csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.prototype (rev 0)
+++ csw/mgar/pkg/openssh/trunk/files/CSWosshlpk.prototype 2009-03-27 23:37:15 UTC (rev 4003)
@@ -0,0 +1,34 @@
+i i.conf=i.conf
+i r.conf=r.conf
+f none /opt/csw/etc/ssh/sshd_config.CSW=sshd_config 0744 root bin
+e conf /opt/csw/etc/ssh/moduli 0644 root bin
+d none /opt/csw/libexec 0755 root bin
+f none /opt/csw/libexec/sftp-server 0755 root bin
+f none /opt/csw/sbin/sshd 0755 root bin
+f none /opt/csw/share/Ssh.bin 0644 root bin
+d none /opt/csw/share/doc/openssh_lpk 0755 root bin
+f none /opt/csw/share/doc/openssh_lpk/changelog.CSW=changelog.CSW 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/CREDITS 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/ChangeLog 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/ChangeLog.gssapi 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/INSTALL 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/LICENCE 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/OVERVIEW 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/README 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/README.dns 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/README.platform 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/README.privsep 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/README.smartcard 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/README.tun 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/TODO 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/WARNING.RNG 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/openssh-lpk_openldap.schema 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/openssh-lpk_sun.schema 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/lpk-user-example.txt 0644 root bin
+f none /opt/csw/share/doc/openssh_lpk/README.lpk 0644 root bin
+f none /opt/csw/share/man/man5/sshd_config.5 0644 root bin
+f none /opt/csw/share/man/man8/sftp-server.8 0644 root bin
+f none /opt/csw/share/man/man8/sshd.8 0644 root bin
+d none /opt/csw/share/openssh 0755 root bin
+f none /opt/csw/share/openssh/openssh_restart_workaround.sh=openssh_restart_workaround.sh 0755 root bin
+d none /var/empty
Added: csw/mgar/pkg/openssh/trunk/files/contrib-openssh-lpk-5.1p1-0.3.9.patch
===================================================================
--- csw/mgar/pkg/openssh/trunk/files/contrib-openssh-lpk-5.1p1-0.3.9.patch (rev 0)
+++ csw/mgar/pkg/openssh/trunk/files/contrib-openssh-lpk-5.1p1-0.3.9.patch 2009-03-27 23:37:15 UTC (rev 4003)
@@ -0,0 +1,1892 @@
+This is a forward-port of the OpenSSH LPK support patch.
+
+It adds support for storing OpenSSH public keys in LDAP. It also supports
+grouping of machines in the LDAP data to limit users to specific machines.
+
+The latest homepage for the LPK project is:
+http://code.google.com/p/openssh-lpk/
+
+Forward-ported-from: openssh-lpk-4.6p1-0.3.9.patch
+Signed-off-by: Robin H. Johnson <robbat2 at gentoo.org>
+
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/auth2-pubkey.c openssh-5.1p1+lpk/auth2-pubkey.c
+--- openssh-5.1p1.orig/auth2-pubkey.c 2008-07-03 19:54:25.000000000 -0700
++++ openssh-5.1p1+lpk/auth2-pubkey.c 2008-08-23 14:36:21.000000000 -0700
+@@ -55,6 +55,10 @@
+ #include "monitor_wrap.h"
+ #include "misc.h"
+
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ /* import */
+ extern ServerOptions options;
+ extern u_char *session_id2;
+@@ -187,10 +191,79 @@
+ u_long linenum = 0;
+ Key *found;
+ char *fp;
++#ifdef WITH_LDAP_PUBKEY
++ ldap_key_t * k;
++ unsigned int i = 0;
++#endif
+
+ /* Temporarily use the user's uid. */
+ temporarily_use_uid(pw);
+
++#ifdef WITH_LDAP_PUBKEY
++ found_key = 0;
++ /* allocate a new key type */
++ found = key_new(key->type);
++
++ /* first check if the options is enabled, then try.. */
++ if (options.lpk.on) {
++ debug("[LDAP] trying LDAP first uid=%s",pw->pw_name);
++ if (ldap_ismember(&options.lpk, pw->pw_name) > 0) {
++ if ((k = ldap_getuserkey(&options.lpk, pw->pw_name)) != NULL) {
++ /* Skip leading whitespace, empty and comment lines. */
++ for (i = 0 ; i < k->num ; i++) {
++ /* dont forget if multiple keys to reset options */
++ char *cp, *options = NULL;
++
++ for (cp = (char *)k->keys[i]->bv_val; *cp == ' ' || *cp == '\t'; cp++)
++ ;
++ if (!*cp || *cp == '\n' || *cp == '#')
++ continue;
++
++ if (key_read(found, &cp) != 1) {
++ /* no key? check if there are options for this key */
++ int quoted = 0;
++ debug2("[LDAP] user_key_allowed: check options: '%s'", cp);
++ options = cp;
++ for (; *cp && (quoted || (*cp != ' ' && *cp != '\t')); cp++) {
++ if (*cp == '\\' && cp[1] == '"')
++ cp++; /* Skip both */
++ else if (*cp == '"')
++ quoted = !quoted;
++ }
++ /* Skip remaining whitespace. */
++ for (; *cp == ' ' || *cp == '\t'; cp++)
++ ;
++ if (key_read(found, &cp) != 1) {
++ debug2("[LDAP] user_key_allowed: advance: '%s'", cp);
++ /* still no key? advance to next line*/
++ continue;
++ }
++ }
++
++ if (key_equal(found, key) &&
++ auth_parse_options(pw, options, file, linenum) == 1) {
++ found_key = 1;
++ debug("[LDAP] matching key found");
++ fp = key_fingerprint(found, SSH_FP_MD5, SSH_FP_HEX);
++ verbose("[LDAP] Found matching %s key: %s", key_type(found), fp);
++
++ /* restoring memory */
++ ldap_keys_free(k);
++ xfree(fp);
++ restore_uid();
++ key_free(found);
++ return found_key;
++ break;
++ }
++ }/* end of LDAP for() */
++ } else {
++ logit("[LDAP] no keys found for '%s'!", pw->pw_name);
++ }
++ } else {
++ logit("[LDAP] '%s' is not in '%s'", pw->pw_name, options.lpk.sgroup);
++ }
++ }
++#endif
+ debug("trying public key file %s", file);
+ f = auth_openkeyfile(file, pw, options.strict_modes);
+
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/auth-rsa.c openssh-5.1p1+lpk/auth-rsa.c
+--- openssh-5.1p1.orig/auth-rsa.c 2008-07-02 05:37:30.000000000 -0700
++++ openssh-5.1p1+lpk/auth-rsa.c 2008-08-23 14:36:21.000000000 -0700
+@@ -174,10 +174,96 @@
+ FILE *f;
+ u_long linenum = 0;
+ Key *key;
++#ifdef WITH_LDAP_PUBKEY
++ ldap_key_t * k;
++ unsigned int i = 0;
++#endif
+
+ /* Temporarily use the user's uid. */
+ temporarily_use_uid(pw);
+
++#ifdef WITH_LDAP_PUBKEY
++ /* here is the job */
++ key = key_new(KEY_RSA1);
++
++ if (options.lpk.on) {
++ debug("[LDAP] trying LDAP first uid=%s", pw->pw_name);
++ if ( ldap_ismember(&options.lpk, pw->pw_name) > 0) {
++ if ( (k = ldap_getuserkey(&options.lpk, pw->pw_name)) != NULL) {
++ for (i = 0 ; i < k->num ; i++) {
++ char *cp, *options = NULL;
++
++ for (cp = k->keys[i]->bv_val; *cp == ' ' || *cp == '\t'; cp++)
++ ;
++ if (!*cp || *cp == '\n' || *cp == '#')
++ continue;
++
++ /*
++ * Check if there are options for this key, and if so,
++ * save their starting address and skip the option part
++ * for now. If there are no options, set the starting
++ * address to NULL.
++ */
++ if (*cp < '0' || *cp > '9') {
++ int quoted = 0;
++ options = cp;
++ for (; *cp && (quoted || (*cp != ' ' && *cp != '\t')); cp++) {
++ if (*cp == '\\' && cp[1] == '"')
++ cp++; /* Skip both */
++ else if (*cp == '"')
++ quoted = !quoted;
++ }
++ } else
++ options = NULL;
++
++ /* Parse the key from the line. */
++ if (hostfile_read_key(&cp, &bits, key) == 0) {
++ debug("[LDAP] line %d: non ssh1 key syntax", i);
++ continue;
++ }
++ /* cp now points to the comment part. */
++
++ /* Check if the we have found the desired key (identified by its modulus). */
++ if (BN_cmp(key->rsa->n, client_n) != 0)
++ continue;
++
++ /* check the real bits */
++ if (bits != (unsigned int)BN_num_bits(key->rsa->n))
++ logit("[LDAP] Warning: ldap, line %lu: keysize mismatch: "
++ "actual %d vs. announced %d.", (unsigned long)i, BN_num_bits(key->rsa->n), bits);
++
++ /* We have found the desired key. */
++ /*
++ * If our options do not allow this key to be used,
++ * do not send challenge.
++ */
++ if (!auth_parse_options(pw, options, "[LDAP]", (unsigned long) i))
++ continue;
++
++ /* break out, this key is allowed */
++ allowed = 1;
++
++ /* add the return stuff etc... */
++ /* Restore the privileged uid. */
++ restore_uid();
++
++ /* return key if allowed */
++ if (allowed && rkey != NULL)
++ *rkey = key;
++ else
++ key_free(key);
++
++ ldap_keys_free(k);
++ return (allowed);
++ }
++ } else {
++ logit("[LDAP] no keys found for '%s'!", pw->pw_name);
++ }
++ } else {
++ logit("[LDAP] '%s' is not in '%s'", pw->pw_name, options.lpk.sgroup);
++ }
++ }
++#endif
+ /* The authorized keys. */
+ file = authorized_keys_file(pw);
+ debug("trying public RSA key file %s", file);
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/config.h.in openssh-5.1p1+lpk/config.h.in
+--- openssh-5.1p1.orig/config.h.in 2008-07-21 01:30:49.000000000 -0700
++++ openssh-5.1p1+lpk/config.h.in 2008-08-23 14:36:21.000000000 -0700
+@@ -560,6 +560,9 @@
+ /* Define to 1 if you have the <linux/if_tun.h> header file. */
+ #undef HAVE_LINUX_IF_TUN_H
+
++/* Define if you want LDAP support */
++#undef WITH_LDAP_PUBKEY
++
+ /* Define if your libraries define login() */
+ #undef HAVE_LOGIN
+
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/configure openssh-5.1p1+lpk/configure
+--- openssh-5.1p1.orig/configure 2008-07-21 01:30:50.000000000 -0700
++++ openssh-5.1p1+lpk/configure 2008-08-23 14:36:21.000000000 -0700
+@@ -1340,6 +1340,7 @@
+ --with-tcp-wrappers[=PATH] Enable tcpwrappers support (optionally in PATH)
+ --with-libedit[=PATH] Enable libedit support for sftp
+ --with-audit=module Enable EXPERIMENTAL audit support (modules=debug,bsm)
++ --with-ldap[=PATH] Enable LDAP pubkey support (optionally in PATH)
+ --with-ssl-dir=PATH Specify path to OpenSSL installation
+ --without-openssl-header-check Disable OpenSSL version consistency check
+ --with-ssl-engine Enable OpenSSL (hardware) ENGINE support
+@@ -12568,6 +12569,85 @@
+ fi
+
+
++# Check whether user wants LDAP support
++LDAP_MSG="no"
++
++# Check whether --with-ldap was given.
++if test "${with_ldap+set}" = set; then
++ withval=$with_ldap;
++ if test "x$withval" != "xno" ; then
++
++ if test "x$withval" != "xyes" ; then
++ CPPFLAGS="$CPPFLAGS -I${withval}/include"
++ LDFLAGS="$LDFLAGS -L${withval}/lib"
++ fi
++
++
++cat >>confdefs.h <<\_ACEOF
++#define WITH_LDAP_PUBKEY 1
++_ACEOF
++
++ LIBS="-lldap $LIBS"
++ LDAP_MSG="yes"
++
++ { echo "$as_me:$LINENO: checking for LDAP support" >&5
++echo $ECHO_N "checking for LDAP support... $ECHO_C" >&6; }
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <sys/types.h>
++ #include <ldap.h>
++int
++main ()
++{
++(void)ldap_init(0, 0);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++ (eval "$ac_compile") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest.$ac_objext; then
++ { echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6; }
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++
++ { echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6; }
++ { { echo "$as_me:$LINENO: error: ** Incomplete or missing ldap libraries **" >&5
++echo "$as_me: error: ** Incomplete or missing ldap libraries **" >&2;}
++ { (exit 1); exit 1; }; }
++
++
++fi
++
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ fi
++
++
++fi
++
++
+
+
+
+@@ -30135,6 +30215,7 @@
+ echo " Smartcard support: $SCARD_MSG"
+ echo " S/KEY support: $SKEY_MSG"
+ echo " TCP Wrappers support: $TCPW_MSG"
++echo " LDAP support: $LDAP_MSG"
+ echo " MD5 password support: $MD5_MSG"
+ echo " libedit support: $LIBEDIT_MSG"
+ echo " Solaris process contract support: $SPC_MSG"
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/configure.ac openssh-5.1p1+lpk/configure.ac
+--- openssh-5.1p1.orig/configure.ac 2008-07-09 04:07:19.000000000 -0700
++++ openssh-5.1p1+lpk/configure.ac 2008-08-23 14:36:21.000000000 -0700
+@@ -1299,6 +1299,37 @@
+ esac ]
+ )
+
++# Check whether user wants LDAP support
++LDAP_MSG="no"
++AC_ARG_WITH(ldap,
++ [ --with-ldap[[=PATH]] Enable LDAP pubkey support (optionally in PATH)],
++ [
++ if test "x$withval" != "xno" ; then
++
++ if test "x$withval" != "xyes" ; then
++ CPPFLAGS="$CPPFLAGS -I${withval}/include"
++ LDFLAGS="$LDFLAGS -L${withval}/lib"
++ fi
++
++ AC_DEFINE([WITH_LDAP_PUBKEY], 1, [Enable LDAP pubkey support])
++ LIBS="-lldap $LIBS"
++ LDAP_MSG="yes"
++
++ AC_MSG_CHECKING([for LDAP support])
++ AC_TRY_COMPILE(
++ [#include <sys/types.h>
++ #include <ldap.h>],
++ [(void)ldap_init(0, 0);],
++ [AC_MSG_RESULT(yes)],
++ [
++ AC_MSG_RESULT(no)
++ AC_MSG_ERROR([** Incomplete or missing ldap libraries **])
++ ]
++ )
++ fi
++ ]
++)
++
+ dnl Checks for library functions. Please keep in alphabetical order
+ AC_CHECK_FUNCS( \
+ arc4random \
+@@ -4137,6 +4168,7 @@
+ echo " Smartcard support: $SCARD_MSG"
+ echo " S/KEY support: $SKEY_MSG"
+ echo " TCP Wrappers support: $TCPW_MSG"
++echo " LDAP support: $LDAP_MSG"
+ echo " MD5 password support: $MD5_MSG"
+ echo " libedit support: $LIBEDIT_MSG"
+ echo " Solaris process contract support: $SPC_MSG"
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/ldapauth.c openssh-5.1p1+lpk/ldapauth.c
+--- openssh-5.1p1.orig/ldapauth.c 1969-12-31 16:00:00.000000000 -0800
++++ openssh-5.1p1+lpk/ldapauth.c 2008-08-23 14:36:21.000000000 -0700
+@@ -0,0 +1,575 @@
++/*
++ * $Id: openssh-lpk-4.3p1-0.3.7.patch,v 1.3 2006/04/18 15:29:09 eau Exp $
++ */
++
++/*
++ *
++ * Copyright (c) 2005, Eric AUGE <eau at phear.org>
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
++ *
++ * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
++ * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
++ * Neither the name of the phear.org nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
++ * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
++ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
++ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *
++ */
++
++#include "includes.h"
++
++#ifdef WITH_LDAP_PUBKEY
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <unistd.h>
++#include <string.h>
++
++#include "ldapauth.h"
++#include "log.h"
++
++static char *attrs[] = {
++ PUBKEYATTR,
++ NULL
++};
++
++/* filter building infos */
++#define FILTER_GROUP_PREFIX "(&(objectclass=posixGroup)"
++#define FILTER_OR_PREFIX "(|"
++#define FILTER_OR_SUFFIX ")"
++#define FILTER_CN_PREFIX "(cn="
++#define FILTER_CN_SUFFIX ")"
++#define FILTER_UID_FORMAT "(memberUid=%s)"
++#define FILTER_GROUP_SUFFIX ")"
++#define FILTER_GROUP_SIZE(group) (size_t) (strlen(group)+(ldap_count_group(group)*5)+52)
++
++/* just filter building stuff */
++#define REQUEST_GROUP_SIZE(filter, uid) (size_t) (strlen(filter)+strlen(uid)+1)
++#define REQUEST_GROUP(buffer, prefilter, pwname) \
++ buffer = (char *) calloc(REQUEST_GROUP_SIZE(prefilter, pwname), sizeof(char)); \
++ if (!buffer) { \
++ perror("calloc()"); \
++ return FAILURE; \
++ } \
++ snprintf(buffer, REQUEST_GROUP_SIZE(prefilter,pwname), prefilter, pwname)
++/*
++XXX OLD group building macros
++#define REQUEST_GROUP_SIZE(grp, uid) (size_t) (strlen(grp)+strlen(uid)+46)
++#define REQUEST_GROUP(buffer,pwname,grp) \
++ buffer = (char *) calloc(REQUEST_GROUP_SIZE(grp, pwname), sizeof(char)); \
++ if (!buffer) { \
++ perror("calloc()"); \
++ return FAILURE; \
++ } \
++ snprintf(buffer,REQUEST_GROUP_SIZE(grp,pwname),"(&(objectclass=posixGroup)(cn=%s)(memberUid=%s))",grp,pwname)
++ */
++
++/*
++XXX stock upstream version without extra filter support
++#define REQUEST_USER_SIZE(uid) (size_t) (strlen(uid)+64)
++#define REQUEST_USER(buffer, pwname) \
++ buffer = (char *) calloc(REQUEST_USER_SIZE(pwname), sizeof(char)); \
++ if (!buffer) { \
++ perror("calloc()"); \
++ return NULL; \
++ } \
++ snprintf(buffer,REQUEST_USER_SIZE(pwname),"(&(objectclass=posixAccount)(objectclass=ldapPublicKey)(uid=%s))",pwname)
++ */
++
++#define REQUEST_USER_SIZE(uid, filter) (size_t) (strlen(uid)+64+(filter != NULL ? strlen(filter) : 0))
++#define REQUEST_USER(buffer, pwname, customfilter) \
++ buffer = (char *) calloc(REQUEST_USER_SIZE(pwname, customfilter), sizeof(char)); \
++ if (!buffer) { \
++ perror("calloc()"); \
++ return NULL; \
++ } \
++ snprintf(buffer, REQUEST_USER_SIZE(pwname, customfilter), \
++ "(&(objectclass=posixAccount)(objectclass=ldapPublicKey)(uid=%s)%s)", \
++ pwname, (customfilter != NULL ? customfilter : ""))
++
++/* some portable and working tokenizer, lame though */
++static int tokenize(char ** o, size_t size, char * input) {
++ unsigned int i = 0, num;
++ const char * charset = " \t";
++ char * ptr = input;
++
++ /* leading white spaces are ignored */
++ num = strspn(ptr, charset);
++ ptr += num;
++
++ while ((num = strcspn(ptr, charset))) {
++ if (i < size-1) {
++ o[i++] = ptr;
++ ptr += num;
++ if (*ptr)
++ *ptr++ = '\0';
++ }
++ }
++ o[i] = NULL;
++ return SUCCESS;
++}
++
++void ldap_close(ldap_opt_t * ldap) {
++
++ if (!ldap)
++ return;
++
++ if ( ldap_unbind_ext(ldap->ld, NULL, NULL) < 0)
++ ldap_perror(ldap->ld, "ldap_unbind()");
++
++ ldap->ld = NULL;
++ FLAG_SET_DISCONNECTED(ldap->flags);
++
++ return;
++}
++
++/* init && bind */
++int ldap_connect(ldap_opt_t * ldap) {
++ int version = LDAP_VERSION3;
++
++ if (!ldap->servers)
++ return FAILURE;
++
++ /* Connection Init and setup */
++ ldap->ld = ldap_init(ldap->servers, LDAP_PORT);
++ if (!ldap->ld) {
++ ldap_perror(ldap->ld, "ldap_init()");
++ return FAILURE;
++ }
++
++ if ( ldap_set_option(ldap->ld, LDAP_OPT_PROTOCOL_VERSION, &version) != LDAP_OPT_SUCCESS) {
++ ldap_perror(ldap->ld, "ldap_set_option(LDAP_OPT_PROTOCOL_VERSION)");
++ return FAILURE;
++ }
++
++ /* Timeouts setup */
++ if (ldap_set_option(ldap->ld, LDAP_OPT_NETWORK_TIMEOUT, &ldap->b_timeout) != LDAP_SUCCESS) {
++ ldap_perror(ldap->ld, "ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT)");
++ }
++ if (ldap_set_option(ldap->ld, LDAP_OPT_TIMEOUT, &ldap->s_timeout) != LDAP_SUCCESS) {
++ ldap_perror(ldap->ld, "ldap_set_option(LDAP_OPT_TIMEOUT)");
++ }
++
++ /* TLS support */
++ if ( (ldap->tls == -1) || (ldap->tls == 1) ) {
++ if (ldap_start_tls_s(ldap->ld, NULL, NULL ) != LDAP_SUCCESS) {
++ /* failed then reinit the initial connect */
++ ldap_perror(ldap->ld, "ldap_connect: (TLS) ldap_start_tls()");
++ if (ldap->tls == 1)
++ return FAILURE;
++
++ ldap->ld = ldap_init(ldap->servers, LDAP_PORT);
++ if (!ldap->ld) {
++ ldap_perror(ldap->ld, "ldap_init()");
++ return FAILURE;
++ }
++
++ if ( ldap_set_option(ldap->ld, LDAP_OPT_PROTOCOL_VERSION, &version) != LDAP_OPT_SUCCESS) {
++ ldap_perror(ldap->ld, "ldap_set_option()");
++ return FAILURE;
++ }
++ }
++ }
++
++
++ if ( ldap_simple_bind_s(ldap->ld, ldap->binddn, ldap->bindpw) != LDAP_SUCCESS) {
++ ldap_perror(ldap->ld, "ldap_simple_bind_s()");
++ return FAILURE;
++ }
++
++ /* says it is connected */
++ FLAG_SET_CONNECTED(ldap->flags);
++
++ return SUCCESS;
++}
++
++/* must free allocated ressource */
++static char * ldap_build_host(char *host, int port) {
++ unsigned int size = strlen(host)+11;
++ char * h = (char *) calloc (size, sizeof(char));
++ int rc;
++ if (!h)
++ return NULL;
++
++ rc = snprintf(h, size, "%s:%d ", host, port);
++ if (rc == -1)
++ return NULL;
++ return h;
++}
++
++static int ldap_count_group(const char * input) {
++ const char * charset = " \t";
++ const char * ptr = input;
++ unsigned int count = 0;
++ unsigned int num;
++
++ num = strspn(ptr, charset);
++ ptr += num;
++
++ while ((num = strcspn(ptr, charset))) {
++ count++;
++ ptr += num;
++ ptr++;
++ }
++
++ return count;
++}
++
++/* format filter */
++char * ldap_parse_groups(const char * groups) {
++ unsigned int buffer_size = FILTER_GROUP_SIZE(groups);
++ char * buffer = (char *) calloc(buffer_size, sizeof(char));
++ char * g = NULL;
++ char * garray[32];
++ unsigned int i = 0;
++
++ if ((!groups)||(!buffer))
++ return NULL;
++
++ g = strdup(groups);
++ if (!g) {
++ free(buffer);
++ return NULL;
++ }
++
++ /* first separate into n tokens */
++ if ( tokenize(garray, sizeof(garray)/sizeof(*garray), g) < 0) {
++ free(g);
++ free(buffer);
++ return NULL;
++ }
++
++ /* build the final filter format */
++ strlcat(buffer, FILTER_GROUP_PREFIX, buffer_size);
++ strlcat(buffer, FILTER_OR_PREFIX, buffer_size);
++ i = 0;
++ while (garray[i]) {
++ strlcat(buffer, FILTER_CN_PREFIX, buffer_size);
++ strlcat(buffer, garray[i], buffer_size);
++ strlcat(buffer, FILTER_CN_SUFFIX, buffer_size);
++ i++;
++ }
++ strlcat(buffer, FILTER_OR_SUFFIX, buffer_size);
++ strlcat(buffer, FILTER_UID_FORMAT, buffer_size);
++ strlcat(buffer, FILTER_GROUP_SUFFIX, buffer_size);
++
++ free(g);
++ return buffer;
++}
++
++/* a bit dirty but leak free */
++char * ldap_parse_servers(const char * servers) {
++ char * s = NULL;
++ char * tmp = NULL, *urls[32];
++ unsigned int num = 0 , i = 0 , asize = 0;
++ LDAPURLDesc *urld[32];
++
++ if (!servers)
++ return NULL;
++
++ /* local copy of the arg */
++ s = strdup(servers);
++ if (!s)
++ return NULL;
++
++ /* first separate into URL tokens */
++ if ( tokenize(urls, sizeof(urls)/sizeof(*urls), s) < 0)
++ return NULL;
++
++ i = 0;
++ while (urls[i]) {
++ if (! ldap_is_ldap_url(urls[i]) ||
++ (ldap_url_parse(urls[i], &urld[i]) != 0)) {
++ return NULL;
++ }
++ i++;
++ }
++
++ /* now free(s) */
++ free (s);
++
++ /* how much memory do we need */
++ num = i;
++ for (i = 0 ; i < num ; i++)
++ asize += strlen(urld[i]->lud_host)+11;
++
++ /* alloc */
++ s = (char *) calloc( asize+1 , sizeof(char));
++ if (!s) {
++ for (i = 0 ; i < num ; i++)
++ ldap_free_urldesc(urld[i]);
++ return NULL;
++ }
++
++ /* then build the final host string */
++ for (i = 0 ; i < num ; i++) {
++ /* built host part */
++ tmp = ldap_build_host(urld[i]->lud_host, urld[i]->lud_port);
++ strncat(s, tmp, strlen(tmp));
++ ldap_free_urldesc(urld[i]);
++ free(tmp);
++ }
++
++ return s;
++}
++
++void ldap_options_print(ldap_opt_t * ldap) {
++ debug("ldap options:");
++ debug("servers: %s", ldap->servers);
++ if (ldap->u_basedn)
++ debug("user basedn: %s", ldap->u_basedn);
++ if (ldap->g_basedn)
++ debug("group basedn: %s", ldap->g_basedn);
++ if (ldap->binddn)
++ debug("binddn: %s", ldap->binddn);
++ if (ldap->bindpw)
++ debug("bindpw: %s", ldap->bindpw);
++ if (ldap->sgroup)
++ debug("group: %s", ldap->sgroup);
++ if (ldap->filter)
++ debug("filter: %s", ldap->filter);
++}
++
++void ldap_options_free(ldap_opt_t * l) {
++ if (!l)
++ return;
++ if (l->servers)
++ free(l->servers);
++ if (l->u_basedn)
++ free(l->u_basedn);
++ if (l->g_basedn)
++ free(l->g_basedn);
++ if (l->binddn)
++ free(l->binddn);
++ if (l->bindpw)
++ free(l->bindpw);
++ if (l->sgroup)
++ free(l->sgroup);
++ if (l->fgroup)
++ free(l->fgroup);
++ if (l->filter)
++ free(l->filter);
++ if (l->l_conf)
++ free(l->l_conf);
++ free(l);
++}
++
++/* free keys */
++void ldap_keys_free(ldap_key_t * k) {
++ ldap_value_free_len(k->keys);
++ free(k);
++ return;
++}
++
++ldap_key_t * ldap_getuserkey(ldap_opt_t *l, const char * user) {
++ ldap_key_t * k = (ldap_key_t *) calloc (1, sizeof(ldap_key_t));
++ LDAPMessage *res, *e;
++ char * filter;
++ int i;
++
++ if ((!k) || (!l))
++ return NULL;
++
++ /* Am i still connected ? RETRY n times */
++ /* XXX TODO: setup some conf value for retrying */
++ if (!(l->flags & FLAG_CONNECTED))
++ for (i = 0 ; i < 2 ; i++)
++ if (ldap_connect(l) == 0)
++ break;
++
++ /* quick check for attempts to be evil */
++ if ((strchr(user, '(') != NULL) || (strchr(user, ')') != NULL) ||
++ (strchr(user, '*') != NULL) || (strchr(user, '\\') != NULL))
++ return NULL;
++
++ /* build filter for LDAP request */
++ REQUEST_USER(filter, user, l->filter);
++
++ if ( ldap_search_st( l->ld,
++ l->u_basedn,
++ LDAP_SCOPE_SUBTREE,
++ filter,
++ attrs, 0, &l->s_timeout, &res ) != LDAP_SUCCESS) {
++
++ ldap_perror(l->ld, "ldap_search_st()");
++
++ free(filter);
++ free(k);
++
++ /* XXX error on search, timeout etc.. close ask for reconnect */
++ ldap_close(l);
++
++ return NULL;
++ }
++
++ /* free */
++ free(filter);
++
++ /* check if any results */
++ i = ldap_count_entries(l->ld,res);
++ if (i <= 0) {
++ ldap_msgfree(res);
++ free(k);
++ return NULL;
++ }
++
++ if (i > 1)
++ debug("[LDAP] duplicate entries, using the FIRST entry returned");
++
++ e = ldap_first_entry(l->ld, res);
++ k->keys = ldap_get_values_len(l->ld, e, PUBKEYATTR);
++ k->num = ldap_count_values_len(k->keys);
++
++ ldap_msgfree(res);
++ return k;
++}
++
++
++/* -1 if trouble
++ 0 if user is NOT member of current server group
++ 1 if user IS MEMBER of current server group
++ */
++int ldap_ismember(ldap_opt_t * l, const char * user) {
++ LDAPMessage *res;
++ char * filter;
++ int i;
++
++ if ((!l->sgroup) || !(l->g_basedn))
++ return 1;
++
++ /* Am i still connected ? RETRY n times */
++ /* XXX TODO: setup some conf value for retrying */
++ if (!(l->flags & FLAG_CONNECTED))
++ for (i = 0 ; i < 2 ; i++)
++ if (ldap_connect(l) == 0)
++ break;
++
++ /* quick check for attempts to be evil */
++ if ((strchr(user, '(') != NULL) || (strchr(user, ')') != NULL) ||
++ (strchr(user, '*') != NULL) || (strchr(user, '\\') != NULL))
++ return FAILURE;
++
++ /* build filter for LDAP request */
++ REQUEST_GROUP(filter, l->fgroup, user);
++
++ if (ldap_search_st( l->ld,
++ l->g_basedn,
++ LDAP_SCOPE_SUBTREE,
++ filter,
++ NULL, 0, &l->s_timeout, &res) != LDAP_SUCCESS) {
++
++ ldap_perror(l->ld, "ldap_search_st()");
++
++ free(filter);
++
++ /* XXX error on search, timeout etc.. close ask for reconnect */
++ ldap_close(l);
++
++ return FAILURE;
++ }
++
++ free(filter);
++
++ /* check if any results */
++ if (ldap_count_entries(l->ld, res) > 0) {
++ ldap_msgfree(res);
++ return 1;
++ }
++
++ ldap_msgfree(res);
++ return 0;
++}
++
++/*
++ * ldap.conf simple parser
++ * XXX TODO: sanity checks
++ * must either
++ * - free the previous ldap_opt_before replacing entries
++ * - free each necessary previously parsed elements
++ * ret:
++ * -1 on FAILURE, 0 on SUCCESS
++ */
++int ldap_parse_lconf(ldap_opt_t * l) {
++ FILE * lcd; /* ldap.conf descriptor */
++ char buf[BUFSIZ];
++ char * s = NULL, * k = NULL, * v = NULL;
++ int li, len;
++
++ lcd = fopen (l->l_conf, "r");
++ if (lcd == NULL) {
++ /* debug("Cannot open %s", l->l_conf); */
++ perror("ldap_parse_lconf()");
++ return FAILURE;
++ }
++
++ while (fgets (buf, sizeof (buf), lcd) != NULL) {
++
++ if (*buf == '\n' || *buf == '#')
++ continue;
++
++ k = buf;
++ v = k;
++ while (*v != '\0' && *v != ' ' && *v != '\t')
++ v++;
++
++ if (*v == '\0')
++ continue;
++
++ *(v++) = '\0';
++
++ while (*v == ' ' || *v == '\t')
++ v++;
++
++ li = strlen (v) - 1;
++ while (v[li] == ' ' || v[li] == '\t' || v[li] == '\n')
++ --li;
++ v[li + 1] = '\0';
++
++ if (!strcasecmp (k, "uri")) {
++ if ((l->servers = ldap_parse_servers(v)) == NULL) {
++ fatal("error in ldap servers");
++ return FAILURE;
++ }
++
++ }
++ else if (!strcasecmp (k, "base")) {
++ s = strchr (v, '?');
++ if (s != NULL) {
++ len = s - v;
++ l->u_basedn = malloc (len + 1);
++ strncpy (l->u_basedn, v, len);
++ l->u_basedn[len] = '\0';
++ } else {
++ l->u_basedn = strdup (v);
++ }
++ }
++ else if (!strcasecmp (k, "binddn")) {
++ l->binddn = strdup (v);
++ }
++ else if (!strcasecmp (k, "bindpw")) {
++ l->bindpw = strdup (v);
++ }
++ else if (!strcasecmp (k, "timelimit")) {
++ l->s_timeout.tv_sec = atoi (v);
++ }
++ else if (!strcasecmp (k, "bind_timelimit")) {
++ l->b_timeout.tv_sec = atoi (v);
++ }
++ else if (!strcasecmp (k, "ssl")) {
++ if (!strcasecmp (v, "start_tls"))
++ l->tls = 1;
++ }
++ }
++
++ fclose (lcd);
++ return SUCCESS;
++}
++
++#endif /* WITH_LDAP_PUBKEY */
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/ldapauth.h openssh-5.1p1+lpk/ldapauth.h
+--- openssh-5.1p1.orig/ldapauth.h 1969-12-31 16:00:00.000000000 -0800
++++ openssh-5.1p1+lpk/ldapauth.h 2008-08-23 14:36:21.000000000 -0700
+@@ -0,0 +1,124 @@
++/*
++ * $Id: openssh-lpk-4.3p1-0.3.7.patch,v 1.3 2006/04/18 15:29:09 eau Exp $
++ */
++
++/*
++ *
++ * Copyright (c) 2005, Eric AUGE <eau at phear.org>
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
++ *
++ * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
++ * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
++ * Neither the name of the phear.org nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
++ * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
++ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
++ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *
++ */
++
++#ifndef LDAPAUTH_H
++#define LDAPAUTH_H
++
++#define LDAP_DEPRECATED 1
++
++#include <string.h>
++#include <time.h>
++#include <ldap.h>
++#include <lber.h>
++
++/* tokens in use for config */
++#define _DEFAULT_LPK_TOKEN "UseLPK"
++#define _DEFAULT_SRV_TOKEN "LpkServers"
++#define _DEFAULT_USR_TOKEN "LpkUserDN"
++#define _DEFAULT_GRP_TOKEN "LpkGroupDN"
++#define _DEFAULT_BDN_TOKEN "LpkBindDN"
++#define _DEFAULT_BPW_TOKEN "LpkBindPw"
++#define _DEFAULT_MYG_TOKEN "LpkServerGroup"
++#define _DEFAULT_FIL_TOKEN "LpkFilter"
++#define _DEFAULT_TLS_TOKEN "LpkForceTLS"
++#define _DEFAULT_BTI_TOKEN "LpkBindTimelimit"
++#define _DEFAULT_STI_TOKEN "LpkSearchTimelimit"
++#define _DEFAULT_LDP_TOKEN "LpkLdapConf"
++
++/* default options */
++#define _DEFAULT_LPK_ON 0
++#define _DEFAULT_LPK_SERVERS NULL
++#define _DEFAULT_LPK_UDN NULL
++#define _DEFAULT_LPK_GDN NULL
++#define _DEFAULT_LPK_BINDDN NULL
++#define _DEFAULT_LPK_BINDPW NULL
++#define _DEFAULT_LPK_SGROUP NULL
++#define _DEFAULT_LPK_FILTER NULL
++#define _DEFAULT_LPK_TLS -1
++#define _DEFAULT_LPK_BTIMEOUT 10
++#define _DEFAULT_LPK_STIMEOUT 10
++#define _DEFAULT_LPK_LDP NULL
++
++/* flags */
++#define FLAG_EMPTY 0x00000000
++#define FLAG_CONNECTED 0x00000001
++
++/* flag macros */
++#define FLAG_SET_EMPTY(x) x&=(FLAG_EMPTY)
++#define FLAG_SET_CONNECTED(x) x|=(FLAG_CONNECTED)
++#define FLAG_SET_DISCONNECTED(x) x&=~(FLAG_CONNECTED)
++
++/* defines */
++#define FAILURE -1
++#define SUCCESS 0
++#define PUBKEYATTR "sshPublicKey"
++
++/*
++ *
++ * defined files path
++ * (should be relocated to pathnames.h,
++ * if one day it's included within the tree)
++ *
++ */
++#define _PATH_LDAP_CONFIG_FILE "/etc/ldap.conf"
++
++/* structures */
++typedef struct ldap_options {
++ int on; /* Use it or NOT */
++ LDAP * ld; /* LDAP file desc */
++ char * servers; /* parsed servers for ldaplib failover handling */
++ char * u_basedn; /* user basedn */
++ char * g_basedn; /* group basedn */
++ char * binddn; /* binddn */
++ char * bindpw; /* bind password */
++ char * sgroup; /* server group */
++ char * fgroup; /* group filter */
++ char * filter; /* additional filter */
++ char * l_conf; /* use ldap.conf */
++ int tls; /* TLS only */
++ struct timeval b_timeout; /* bind timeout */
++ struct timeval s_timeout; /* search timeout */
++ unsigned int flags; /* misc flags (reconnection, future use?) */
++} ldap_opt_t;
++
++typedef struct ldap_keys {
++ struct berval ** keys; /* the public keys retrieved */
++ unsigned int num; /* number of keys */
++} ldap_key_t;
++
++
++/* function headers */
++void ldap_close(ldap_opt_t *);
++int ldap_connect(ldap_opt_t *);
++char * ldap_parse_groups(const char *);
++char * ldap_parse_servers(const char *);
++void ldap_options_print(ldap_opt_t *);
++void ldap_options_free(ldap_opt_t *);
++void ldap_keys_free(ldap_key_t *);
++int ldap_parse_lconf(ldap_opt_t *);
++ldap_key_t * ldap_getuserkey(ldap_opt_t *, const char *);
++int ldap_ismember(ldap_opt_t *, const char *);
++
++#endif
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/lpk-user-example.txt openssh-5.1p1+lpk/lpk-user-example.txt
+--- openssh-5.1p1.orig/lpk-user-example.txt 1969-12-31 16:00:00.000000000 -0800
++++ openssh-5.1p1+lpk/lpk-user-example.txt 2008-08-23 14:36:21.000000000 -0700
+@@ -0,0 +1,117 @@
++
++Post to ML -> User Made Quick Install Doc.
++Contribution from John Lane <john at lane.uk.net>
++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++
++OpenSSH LDAP keystore Patch
++===========================
++
++NOTE: these notes are a transcript of a specific installation
++ they work for me, your specifics may be different!
++ from John Lane March 17th 2005 john at lane.uk.net
++
++This is a patch to OpenSSH 4.0p1 to allow it to obtain users' public keys
++from their LDAP record as an alternative to ~/.ssh/authorized_keys.
++
++(Assuming here that necessary build stuff is in $BUILD)
++
++cd $BUILD/openssh-4.0p1
++patch -Np1 -i $BUILD/openssh-lpk-4.0p1-0.3.patch
++mkdir -p /var/empty &&
++./configure --prefix=/usr --sysconfdir=/etc/ssh \
++ --libexecdir=/usr/sbin --with-md5-passwords --with-pam \
++ --with-libs="-lldap" --with-cppflags="-DWITH_LDAP_PUBKEY"
++Now do.
++make &&
++make install
++
++Add the following config to /etc/ssh/ssh_config
++UseLPK yes
++LpkServers ldap://myhost.mydomain.com
++LpkUserDN ou=People,dc=mydomain,dc=com
++
++We need to tell sshd about the SSL keys during boot, as root's
++environment does not exist at that time. Edit /etc/rc.d/init.d/sshd.
++Change the startup code from this:
++ echo "Starting SSH Server..."
++ loadproc /usr/sbin/sshd
++ ;;
++to this:
++ echo "Starting SSH Server..."
++ LDAPRC="/root/.ldaprc" loadproc /usr/sbin/sshd
++ ;;
++
++Re-start the sshd daemon:
++/etc/rc.d/init.d/sshd restart
++
++Install the additional LDAP schema
++cp $BUILD/openssh-lpk-0.2.schema /etc/openldap/schema/openssh.schema
++
++Now add the openSSH LDAP schema to /etc/openldap/slapd.conf:
++Add the following to the end of the existing block of schema includes
++include /etc/openldap/schema/openssh.schema
++
++Re-start the LDAP server:
++/etc/rc.d/init.d/slapd restart
++
++To add one or more public keys to a user, eg "testuser" :
++ldapsearch -x -W -Z -LLL -b "uid=testuser,ou=People,dc=mydomain,dc=com" -D
++"uid=testuser,ou=People,dc=mydomain,dc=com" > /tmp/testuser
++
++append the following to this /tmp/testuser file
++objectclass: ldapPublicKey
++sshPublicKey: ssh-rsa
++AAAAB3NzaC1yc2EAAAABJQAAAIB3dsrwqXqD7E4zYYrxwdDKBUQxKMioXy9pxFVai64kAPxjU9KS
++qIo7QfkjslfsjflksjfldfkjsldfjLX/5zkzRmT28I5piGzunPv17S89z8XwSsuAoR1t86t+5dlI
++7eZE/gVbn2UQkQq7+kdDTS2yXV6VnC52N/kKLG3ciBkBAw== General Purpose RSA Key
++
++Then do a modify:
++ldapmodify -x -D "uid=testuser,ou=People,dc=mydomain,dc=com" -W -f
++/tmp/testuser -Z
++Enter LDAP Password:
++modifying entry "uid=testuser,ou=People,dc=mydomain,dc=com"
++And check the modify is ok:
++ldapsearch -x -W -Z -b "uid=testuser,ou=People,dc=mydomain,dc=com" -D
++"uid=testuser,ou=People,dc=mydomain,dc=com"
++Enter LDAP Password:
++# extended LDIF
++#
++# LDAPv3
++# base <uid=testuser,ou=People,dc=mydomain,dc=com> with scope sub
++# filter: (objectclass=*)
++# requesting: ALL
++#
++
++# testuser, People, mydomain.com
++dn: uid=testuser,ou=People,dc=mydomain,dc=com
++uid: testuser
++cn: testuser
++objectClass: account
++objectClass: posixAccount
++objectClass: top
++objectClass: shadowAccount
++objectClass: ldapPublicKey
++shadowLastChange: 12757
++shadowMax: 99999
++shadowWarning: 7
++loginShell: /bin/bash
++uidNumber: 9999
++gidNumber: 501
++homeDirectory: /home/testuser
++userPassword:: e1NTSEF9UDgwV1hnM1VjUDRJK0k1YnFiL1d4ZUJObXlZZ3Z3UTU=
++sshPublicKey: ssh-rsa
++AAAAB3NzaC1yc2EAAAABJQAAAIB3dsrwqXqD7E4zYYrxwdDKBUQxKMioXy9pxFVai64kAPxjU9KSqIo7QfkjslfsjflksjfldfkjsldfjLX/5zkzRmT28I5piGzunPv17S89z
++8XwSsuAoR1t86t+5dlI7eZE/gVbn2UQkQq7+kdDTS2yXV6VnC52N/kKLG3ciBkBAw== General Purpose RSA Key
++
++# search result
++search: 3
++result: 0 Success
++
++# numResponses: 2
++# numEntries: 1
++
++Now start a ssh session to user "testuser" from usual ssh client (e.g.
++puTTY). Login should succeed.
++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/Makefile.in openssh-5.1p1+lpk/Makefile.in
+--- openssh-5.1p1.orig/Makefile.in 2008-07-08 07:21:12.000000000 -0700
++++ openssh-5.1p1+lpk/Makefile.in 2008-08-23 14:37:55.000000000 -0700
+@@ -86,7 +86,7 @@
+ auth-krb5.o \
+ auth2-gss.o gss-serv.o gss-serv-krb5.o \
+ loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o \
+- audit.o audit-bsm.o platform.o sftp-server.o sftp-common.o
++ audit.o audit-bsm.o platform.o ldapauth.o sftp-server.o sftp-common.o
+
+ MANPAGES = moduli.5.out scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-rand-helper.8.out ssh-keysign.8.out sshd_config.5.out ssh_config.5.out
+ MANPAGES_IN = moduli.5 scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-rand-helper.8 ssh-keysign.8 sshd_config.5 ssh_config.5
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/openssh-lpk_openldap.schema openssh-5.1p1+lpk/openssh-lpk_openldap.schema
+--- openssh-5.1p1.orig/openssh-lpk_openldap.schema 1969-12-31 16:00:00.000000000 -0800
++++ openssh-5.1p1+lpk/openssh-lpk_openldap.schema 2008-08-23 14:36:21.000000000 -0700
+@@ -0,0 +1,19 @@
++#
++# LDAP Public Key Patch schema for use with openssh-ldappubkey
++# Author: Eric AUGE <eau at phear.org>
++#
++# Based on the proposal of : Mark Ruijter
++#
++
++
++# octetString SYNTAX
++attributetype ( 1.3.6.1.4.1.24552.500.1.1.1.13 NAME 'sshPublicKey'
++ DESC 'MANDATORY: OpenSSH Public key'
++ EQUALITY octetStringMatch
++ SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 )
++
++# printableString SYNTAX yes|no
++objectclass ( 1.3.6.1.4.1.24552.500.1.1.2.0 NAME 'ldapPublicKey' SUP top AUXILIARY
++ DESC 'MANDATORY: OpenSSH LPK objectclass'
++ MUST ( sshPublicKey $ uid )
++ )
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/openssh-lpk_sun.schema openssh-5.1p1+lpk/openssh-lpk_sun.schema
+--- openssh-5.1p1.orig/openssh-lpk_sun.schema 1969-12-31 16:00:00.000000000 -0800
++++ openssh-5.1p1+lpk/openssh-lpk_sun.schema 2008-08-23 14:36:21.000000000 -0700
+@@ -0,0 +1,21 @@
++#
++# LDAP Public Key Patch schema for use with openssh-ldappubkey
++# Author: Eric AUGE <eau at phear.org>
++#
++# Schema for Sun Directory Server.
++# Based on the original schema, modified by Stefan Fischer.
++#
++
++dn: cn=schema
++
++# octetString SYNTAX
++attributeTypes: ( 1.3.6.1.4.1.24552.500.1.1.1.13 NAME 'sshPublicKey'
++ DESC 'MANDATORY: OpenSSH Public key'
++ EQUALITY octetStringMatch
++ SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 )
++
++# printableString SYNTAX yes|no
++objectClasses: ( 1.3.6.1.4.1.24552.500.1.1.2.0 NAME 'ldapPublicKey' SUP top AUXILIARY
++ DESC 'MANDATORY: OpenSSH LPK objectclass'
++ MUST ( sshPublicKey $ uid )
++ )
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/README.lpk openssh-5.1p1+lpk/README.lpk
+--- openssh-5.1p1.orig/README.lpk 1969-12-31 16:00:00.000000000 -0800
++++ openssh-5.1p1+lpk/README.lpk 2008-08-23 14:36:21.000000000 -0700
+@@ -0,0 +1,267 @@
++OpenSSH LDAP PUBLIC KEY PATCH
++Copyright (c) 2003 Eric AUGE (eau at phear.org)
++All rights reserved.
++
++Redistribution and use in source and binary forms, with or without
++modification, are permitted provided that the following conditions
++are met:
++1. Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++2. Redistributions in binary form must reproduce the above copyright
++ notice, this list of conditions and the following disclaimer in the
++ documentation and/or other materials provided with the distribution.
++3. The name of the author may not be used to endorse or promote products
++ derived from this software without specific prior written permission.
++
++THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++
++purposes of this patch:
++
++This patch would help to have authentication centralization policy
++using ssh public key authentication.
++This patch could be an alternative to other "secure" authentication system
++working in a similar way (Kerberos, SecurID, etc...), except the fact
++that it's based on OpenSSH and its public key abilities.
++
++>> FYI: <<
++'uid': means unix accounts existing on the current server
++'lpkServerGroup:' mean server group configured on the current server ('lpkServerGroup' in sshd_config)
++
++example schema:
++
++
++ server1 (uid: eau,rival,toto) (lpkServerGroup: unix)
++ ___________ /
++ / \ --- - server3 (uid: eau, titi) (lpkServerGroup: unix)
++ | LDAP Server | \
++ | eau ,rival | server2 (uid: rival, eau) (lpkServerGroup: unix)
++ | titi ,toto |
++ | userx,.... | server5 (uid: eau) (lpkServerGroup: mail)
++ \___________/ \ /
++ ----- - server4 (uid: eau, rival) (no group configured)
++ \
++ etc...
++
++- WHAT WE NEED :
++
++ * configured LDAP server somewhere on the network (i.e. OpenLDAP)
++ * patched sshd (with this patch ;)
++ * LDAP user(/group) entry (look at users.ldif (& groups.ldif)):
++ User entry:
++ - attached to the 'ldapPublicKey' objectclass
++ - attached to the 'posixAccount' objectclass
++ - with a filled 'sshPublicKey' attribute
++ Example:
++ dn: uid=eau,ou=users,dc=cuckoos,dc=net
++ objectclass: top
++ objectclass: person
++ objectclass: organizationalPerson
++ objectclass: posixAccount
++ objectclass: ldapPublicKey
++ description: Eric AUGE Account
++ userPassword: blah
++ cn: Eric AUGE
++ sn: Eric AUGE
++ uid: eau
++ uidNumber: 1034
++ gidNumber: 1
++ homeDirectory: /export/home/eau
++ sshPublicKey: ssh-dss AAAAB3...
++ sshPublicKey: ssh-dss AAAAM5...
++
++ Group entry:
++ - attached to the 'posixGroup' objectclass
++ - with a 'cn' groupname attribute
++ - with multiple 'memberUid' attributes filled with usernames allowed in this group
++ Example:
++ # few members
++ dn: cn=unix,ou=groups,dc=cuckoos,dc=net
++ objectclass: top
++ objectclass: posixGroup
++ description: Unix based servers group
++ cn: unix
++ gidNumber: 1002
++ memberUid: eau
++ memberUid: user1
++ memberUid: user2
++
++
++- HOW IT WORKS :
++
++ * without patch
++ If a user wants to authenticate to log in a server the sshd, will first look for authentication method allowed (RSAauth,kerberos,etc..)
++ and if RSAauth and tickets based auth fails, it will fallback to standard password authentication (if enabled).
++
++ * with the patch
++ If a user want to authenticate to log in a server, the sshd will first look for auth method including LDAP pubkey, if the ldappubkey options is enabled.
++ It will do an ldapsearch to get the public key directly from the LDAP instead of reading it from the server filesystem.
++ (usually in $HOME/.ssh/authorized_keys)
++
++ If groups are enabled, it will also check if the user that wants to login is in the group of the server he is trying to log into.
++ If it fails, it falls back on RSA auth files ($HOME/.ssh/authorized_keys), etc.. and finally to standard password authentication (if enabled).
++
++ 7 tokens are added to sshd_config :
++ # here is the new patched ldap related tokens
++ # entries in your LDAP must be posixAccount & strongAuthenticationUser & posixGroup
++ UseLPK yes # look the pub key into LDAP
++ LpkServers ldap://10.31.32.5/ ldap://10.31.32.4 ldap://10.31.32.3 # which LDAP server for users ? (URL format)
++ LpkUserDN ou=users,dc=foobar,dc=net # which base DN for users ?
++ LpkGroupDN ou=groups,dc=foobar,dc=net # which base DN for groups ?
++ LpkBindDN cn=manager,dc=foobar,dc=net # which bind DN ?
++ LpkBindPw asecret # bind DN credidentials
++ LpkServerGroup agroupname # the group the server is part of
++
++ Right now i'm using anonymous binding to get public keys, because getting public keys of someone doesn't impersonate him\xB8 but there is some
++ flaws you have to take care of.
++
++- HOW TO INSERT A USER/KEY INTO AN LDAP ENTRY
++
++ * my way (there is plenty :)
++ - create ldif file (i.e. users.ldif)
++ - cat ~/.ssh/id_dsa.pub OR cat ~/.ssh/id_rsa.pub OR cat ~/.ssh/identity.pub
++ - my way in 4 steps :
++ Example:
++
++ # you add this to the user entry in the LDIF file :
++ [...]
++ objectclass: posixAccount
++ objectclass: ldapPublicKey
++ [...]
++ sshPubliKey: ssh-dss AAAABDh12DDUR2...
++ [...]
++
++ # insert your entry and you're done :)
++ ldapadd -D balblabla -w bleh < file.ldif
++
++ all standard options can be present in the 'sshPublicKey' attribute.
++
++- WHY :
++
++ Simply because, i was looking for a way to centralize all sysadmins authentication, easily, without completely using LDAP
++ as authentication method (like pam_ldap etc..).
++
++ After looking into Kerberos, SecurID, and other centralized secure authentications systems, the use of RSA and LDAP to get
++ public key for authentication allows us to control who has access to which server (the user needs an account and to be in 'strongAuthenticationUser'
++ objectclass within LDAP and part of the group the SSH server is in).
++
++ Passwords update are no longer a nightmare for a server farm (key pair passphrase is stored on each user's box and private key is locally encrypted using his passphrase
++ so each user can change it as much as he wants).
++
++ Blocking a user account can be done directly from the LDAP (if sshd is using RSAAuth + ldap only).
++
++- RULES :
++ Entry in the LDAP server must respect 'posixAccount' and 'ldapPublicKey' which are defined in core.schema.
++ and the additionnal lpk.schema.
++
++ This patch could allow a smooth transition between standard auth (/etc/passwd) and complete LDAP based authentication
++ (pamldap, nss_ldap, etc..).
++
++ This can be an alternative to other (old?/expensive?) authentication methods (Kerberos/SecurID/..).
++
++ Referring to schema at the beginning of this file if user 'eau' is only in group 'unix'
++ 'eau' would ONLY access 'server1', 'server2', 'server3' AND 'server4' BUT NOT 'server5'.
++ If you then modify the LDAP 'mail' group entry to add 'memberUid: eau' THEN user 'eau' would be able
++ to log in 'server5' (i hope you got the idea, my english is bad :).
++
++ Each server's sshd is patched and configured to ask the public key and the group infos in the LDAP
++ server.
++ When you want to allow a new user to have access to the server parc, you just add him an account on
++ your servers, you add his public key into his entry on the LDAP server, it's done.
++
++ Because sshds are looking public keys into the LDAP directly instead of a file ($HOME/.ssh/authorized_keys).
++
++ When the user needs to change his passphrase he can do it directly from his workstation by changing
++ his own key set lock passphrase, and all servers are automatically aware.
++
++ With a CAREFUL LDAP server configuration you could allow a user to add/delete/modify his own entry himself
++ so he can add/modify/delete himself his public key when needed.
++
++\xAD FLAWS :
++ LDAP must be well configured, getting the public key of some user is not a problem, but if anonymous LDAP
++ allow write to users dn, somebody could replace someuser's public key by its own and impersonate some
++ of your users in all your server farm be VERY CAREFUL.
++
++ MITM attack when sshd is requesting the public key, could lead to a compromise of your servers allowing login
++ as the impersonnated user.
++
++ If LDAP server is down then, fallback on passwd auth.
++
++ the ldap code part has not been well audited yet.
++
++- LDAP USER ENTRY EXAMPLES (LDIF Format, look in users.ldif)
++ --- CUT HERE ---
++ dn: uid=jdoe,ou=users,dc=foobar,dc=net
++ objectclass: top
++ objectclass: person
++ objectclass: organizationalPerson
++ objectclass: posixAccount
++ objectclass: ldapPublicKey
++ description: My account
++ cn: John Doe
++ sn: John Doe
++ uid: jdoe
++ uidNumber: 100
++ gidNumber: 100
++ homeDirectory: /home/jdoe
++ sshPublicKey: ssh-dss AAAAB3NzaC1kc3MAAAEBAOvL8pREUg9wSy/8+hQJ54YF3AXkB0OZrXB....
++ [...]
++ --- CUT HERE ---
++
++- LDAP GROUP ENTRY EXAMPLES (LDIF Format, look in groups.ldif)
++ --- CUT HERE ---
++ dn: cn=unix,ou=groups,dc=cuckoos,dc=net
++ objectclass: top
++ objectclass: posixGroup
++ description: Unix based servers group
++ cn: unix
++ gidNumber: 1002
++ memberUid: jdoe
++ memberUid: user1
++ memberUid: user2
++ [...]
++ --- CUT HERE ---
++
++>> FYI: <<
++Multiple 'sshPublicKey' in a user entry are allowed, as well as multiple 'memberUid' attributes in a group entry
++
++- COMPILING:
++ 1. Apply the patch
++ 2. ./configure --with-your-options --with-ldap=/prefix/to/ldap_libs_and_includes
++ 3. make
++ 4. it's done.
++
++- BLA :
++ I hope this could help, and i hope to be clear enough,, or give ideas. questions/comments/improvements are welcome.
++
++- TODO :
++ Redesign differently.
++
++- DOCS/LINK :
++ http://pacsec.jp/core05/psj05-barisani-en.pdf
++ http://fritz.potsdam.edu/projects/openssh-lpk/
++ http://fritz.potsdam.edu/projects/sshgate/
++ http://dev.inversepath.com/trac/openssh-lpk
++ http://lam.sf.net/ ( http://lam.sourceforge.net/documentation/supportedSchemas.htm )
++
++- CONTRIBUTORS/IDEAS/GREETS :
++ - Falk Siemonsmeier.
++ - Jacob Rief.
++ - Michael Durchgraf.
++ - frederic peters.
++ - Finlay dobbie.
++ - Stefan Fisher.
++ - Robin H. Johnson.
++ - Adrian Bridgett.
++
++- CONTACT :
++ - Eric AUGE <eau at phear.org>
++ - Andrea Barisani <andrea at inversepath.com>
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/servconf.c openssh-5.1p1+lpk/servconf.c
+--- openssh-5.1p1.orig/servconf.c 2008-07-03 20:51:12.000000000 -0700
++++ openssh-5.1p1+lpk/servconf.c 2008-08-23 14:37:18.000000000 -0700
+@@ -42,6 +42,10 @@
+ #include "channels.h"
+ #include "groupaccess.h"
+
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ static void add_listen_addr(ServerOptions *, char *, u_short);
+ static void add_one_listen_addr(ServerOptions *, char *, u_short);
+
+@@ -127,6 +131,25 @@
+ options->num_permitted_opens = -1;
+ options->adm_forced_command = NULL;
+ options->chroot_directory = NULL;
++#ifdef WITH_LDAP_PUBKEY
++ /* XXX dirty */
++ options->lpk.ld = NULL;
++ options->lpk.on = -1;
++ options->lpk.servers = NULL;
++ options->lpk.u_basedn = NULL;
++ options->lpk.g_basedn = NULL;
++ options->lpk.binddn = NULL;
++ options->lpk.bindpw = NULL;
++ options->lpk.sgroup = NULL;
++ options->lpk.filter = NULL;
++ options->lpk.fgroup = NULL;
++ options->lpk.l_conf = NULL;
++ options->lpk.tls = -1;
++ options->lpk.b_timeout.tv_sec = -1;
++ options->lpk.s_timeout.tv_sec = -1;
++ options->lpk.flags = FLAG_EMPTY;
++#endif
++
+ }
+
+ void
+@@ -258,6 +281,32 @@
+ options->authorized_keys_file = _PATH_SSH_USER_PERMITTED_KEYS;
+ if (options->permit_tun == -1)
+ options->permit_tun = SSH_TUNMODE_NO;
++#ifdef WITH_LDAP_PUBKEY
++ if (options->lpk.on == -1)
++ options->lpk.on = _DEFAULT_LPK_ON;
++ if (options->lpk.servers == NULL)
++ options->lpk.servers = _DEFAULT_LPK_SERVERS;
++ if (options->lpk.u_basedn == NULL)
++ options->lpk.u_basedn = _DEFAULT_LPK_UDN;
++ if (options->lpk.g_basedn == NULL)
++ options->lpk.g_basedn = _DEFAULT_LPK_GDN;
++ if (options->lpk.binddn == NULL)
++ options->lpk.binddn = _DEFAULT_LPK_BINDDN;
++ if (options->lpk.bindpw == NULL)
++ options->lpk.bindpw = _DEFAULT_LPK_BINDPW;
++ if (options->lpk.sgroup == NULL)
++ options->lpk.sgroup = _DEFAULT_LPK_SGROUP;
++ if (options->lpk.filter == NULL)
++ options->lpk.filter = _DEFAULT_LPK_FILTER;
++ if (options->lpk.tls == -1)
++ options->lpk.tls = _DEFAULT_LPK_TLS;
++ if (options->lpk.b_timeout.tv_sec == -1)
++ options->lpk.b_timeout.tv_sec = _DEFAULT_LPK_BTIMEOUT;
++ if (options->lpk.s_timeout.tv_sec == -1)
++ options->lpk.s_timeout.tv_sec = _DEFAULT_LPK_STIMEOUT;
++ if (options->lpk.l_conf == NULL)
++ options->lpk.l_conf = _DEFAULT_LPK_LDP;
++#endif
+
+ /* Turn privilege separation on by default */
+ if (use_privsep == -1)
+@@ -303,6 +352,12 @@
+ sMatch, sPermitOpen, sForceCommand, sChrootDirectory,
+ sUsePrivilegeSeparation, sAllowAgentForwarding,
+ sDeprecated, sUnsupported
++#ifdef WITH_LDAP_PUBKEY
++ ,sLdapPublickey, sLdapServers, sLdapUserDN
++ ,sLdapGroupDN, sBindDN, sBindPw, sMyGroup
++ ,sLdapFilter, sForceTLS, sBindTimeout
++ ,sSearchTimeout, sLdapConf
++#endif
+ } ServerOpCodes;
+
+ #define SSHCFG_GLOBAL 0x01 /* allowed in main section of sshd_config */
+@@ -408,6 +463,20 @@
+ { "clientalivecountmax", sClientAliveCountMax, SSHCFG_GLOBAL },
+ { "authorizedkeysfile", sAuthorizedKeysFile, SSHCFG_GLOBAL },
+ { "authorizedkeysfile2", sAuthorizedKeysFile2, SSHCFG_GLOBAL },
++#ifdef WITH_LDAP_PUBKEY
++ { _DEFAULT_LPK_TOKEN, sLdapPublickey, SSHCFG_GLOBAL },
++ { _DEFAULT_SRV_TOKEN, sLdapServers, SSHCFG_GLOBAL },
++ { _DEFAULT_USR_TOKEN, sLdapUserDN, SSHCFG_GLOBAL },
++ { _DEFAULT_GRP_TOKEN, sLdapGroupDN, SSHCFG_GLOBAL },
++ { _DEFAULT_BDN_TOKEN, sBindDN, SSHCFG_GLOBAL },
++ { _DEFAULT_BPW_TOKEN, sBindPw, SSHCFG_GLOBAL },
++ { _DEFAULT_MYG_TOKEN, sMyGroup, SSHCFG_GLOBAL },
++ { _DEFAULT_FIL_TOKEN, sLdapFilter, SSHCFG_GLOBAL },
++ { _DEFAULT_TLS_TOKEN, sForceTLS, SSHCFG_GLOBAL },
++ { _DEFAULT_BTI_TOKEN, sBindTimeout, SSHCFG_GLOBAL },
++ { _DEFAULT_STI_TOKEN, sSearchTimeout, SSHCFG_GLOBAL },
++ { _DEFAULT_LDP_TOKEN, sLdapConf, SSHCFG_GLOBAL },
++#endif
+ { "useprivilegeseparation", sUsePrivilegeSeparation, SSHCFG_GLOBAL },
+ { "acceptenv", sAcceptEnv, SSHCFG_GLOBAL },
+ { "permittunnel", sPermitTunnel, SSHCFG_GLOBAL },
+@@ -1294,6 +1363,107 @@
+ while (arg)
+ arg = strdelim(&cp);
+ break;
++#ifdef WITH_LDAP_PUBKEY
++ case sLdapPublickey:
++ intptr = &options->lpk.on;
++ goto parse_flag;
++ case sLdapServers:
++ /* arg = strdelim(&cp); */
++ p = line;
++ while(*p++);
++ arg = p;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing ldap server",filename,linenum);
++ arg[strlen(arg)] = '\0';
++ if ((options->lpk.servers = ldap_parse_servers(arg)) == NULL)
++ fatal("%s line %d: error in ldap servers", filename, linenum);
++ memset(arg,0,strlen(arg));
++ break;
++ case sLdapUserDN:
++ arg = cp;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing ldap server",filename,linenum);
++ arg[strlen(arg)] = '\0';
++ options->lpk.u_basedn = xstrdup(arg);
++ memset(arg,0,strlen(arg));
++ break;
++ case sLdapGroupDN:
++ arg = cp;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing ldap server",filename,linenum);
++ arg[strlen(arg)] = '\0';
++ options->lpk.g_basedn = xstrdup(arg);
++ memset(arg,0,strlen(arg));
++ break;
++ case sBindDN:
++ arg = cp;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing binddn",filename,linenum);
++ arg[strlen(arg)] = '\0';
++ options->lpk.binddn = xstrdup(arg);
++ memset(arg,0,strlen(arg));
++ break;
++ case sBindPw:
++ arg = cp;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing bindpw",filename,linenum);
++ arg[strlen(arg)] = '\0';
++ options->lpk.bindpw = xstrdup(arg);
++ memset(arg,0,strlen(arg));
++ break;
++ case sMyGroup:
++ arg = cp;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing groupname",filename, linenum);
++ arg[strlen(arg)] = '\0';
++ options->lpk.sgroup = xstrdup(arg);
++ if (options->lpk.sgroup)
++ options->lpk.fgroup = ldap_parse_groups(options->lpk.sgroup);
++ memset(arg,0,strlen(arg));
++ break;
++ case sLdapFilter:
++ arg = cp;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing filter",filename, linenum);
++ arg[strlen(arg)] = '\0';
++ options->lpk.filter = xstrdup(arg);
++ memset(arg,0,strlen(arg));
++ break;
++ case sForceTLS:
++ intptr = &options->lpk.tls;
++ arg = strdelim(&cp);
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing yes/no argument.",
++ filename, linenum);
++ value = 0; /* silence compiler */
++ if (strcmp(arg, "yes") == 0)
++ value = 1;
++ else if (strcmp(arg, "no") == 0)
++ value = 0;
++ else if (strcmp(arg, "try") == 0)
++ value = -1;
++ else
++ fatal("%s line %d: Bad yes/no argument: %s",
++ filename, linenum, arg);
++ if (*intptr == -1)
++ *intptr = value;
++ break;
++ case sBindTimeout:
++ intptr = (int *) &options->lpk.b_timeout.tv_sec;
++ goto parse_int;
++ case sSearchTimeout:
++ intptr = (int *) &options->lpk.s_timeout.tv_sec;
++ goto parse_int;
++ break;
++ case sLdapConf:
++ arg = cp;
++ if (!arg || *arg == '\0')
++ fatal("%s line %d: missing LpkLdapConf", filename, linenum);
++ arg[strlen(arg)] = '\0';
++ options->lpk.l_conf = xstrdup(arg);
++ memset(arg, 0, strlen(arg));
++ break;
++#endif
+
+ default:
+ fatal("%s line %d: Missing handler for opcode %s (%d)",
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/servconf.h openssh-5.1p1+lpk/servconf.h
+--- openssh-5.1p1.orig/servconf.h 2008-06-10 06:01:51.000000000 -0700
++++ openssh-5.1p1+lpk/servconf.h 2008-08-23 14:36:21.000000000 -0700
+@@ -16,6 +16,10 @@
+ #ifndef SERVCONF_H
+ #define SERVCONF_H
+
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ #define MAX_PORTS 256 /* Max # ports. */
+
+ #define MAX_ALLOW_USERS 256 /* Max # users on allow list. */
+@@ -145,6 +149,9 @@
+ int use_pam; /* Enable auth via PAM */
+
+ int permit_tun;
++#ifdef WITH_LDAP_PUBKEY
++ ldap_opt_t lpk;
++#endif
+
+ int num_permitted_opens;
+
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/sshd.c openssh-5.1p1+lpk/sshd.c
+--- openssh-5.1p1.orig/sshd.c 2008-07-11 00:36:49.000000000 -0700
++++ openssh-5.1p1+lpk/sshd.c 2008-08-23 14:36:21.000000000 -0700
+@@ -127,6 +127,10 @@
+ int deny_severity;
+ #endif /* LIBWRAP */
+
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ #ifndef O_NOCTTY
+ #define O_NOCTTY 0
+ #endif
+@@ -1484,6 +1488,16 @@
+ exit(1);
+ }
+
++#ifdef WITH_LDAP_PUBKEY
++ /* ldap_options_print(&options.lpk); */
++ /* XXX initialize/check ldap connection and set *LD */
++ if (options.lpk.on) {
++ if (options.lpk.l_conf && (ldap_parse_lconf(&options.lpk) < 0) )
++ error("[LDAP] could not parse %s", options.lpk.l_conf);
++ if (ldap_connect(&options.lpk) < 0)
++ error("[LDAP] could not initialize ldap connection");
++ }
++#endif
+ debug("sshd version %.100s", SSH_RELEASE);
+
+ /* Store privilege separation user for later use if required. */
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/sshd_config openssh-5.1p1+lpk/sshd_config
+--- openssh-5.1p1.orig/sshd_config 2008-07-02 05:35:43.000000000 -0700
++++ openssh-5.1p1+lpk/sshd_config 2008-08-23 14:38:35.000000000 -0700
+@@ -109,6 +109,21 @@
+ # no default banner path
+ #Banner none
+
++# here are the new patched ldap related tokens
++# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
++#UseLPK yes
++#LpkLdapConf /etc/ldap.conf
++#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
++#LpkUserDN ou=users,dc=phear,dc=org
++#LpkGroupDN ou=groups,dc=phear,dc=org
++#LpkBindDN cn=Manager,dc=phear,dc=org
++#LpkBindPw secret
++#LpkServerGroup mail
++#LpkFilter (hostAccess=master.phear.org)
++#LpkForceTLS no
++#LpkSearchTimelimit 3
++#LpkBindTimelimit 3
++
+ # override default of no subsystems
+ Subsystem sftp /usr/libexec/sftp-server
+
+diff -Nuar --exclude '*.rej' --exclude '*.orig' openssh-5.1p1.orig/sshd_config.5 openssh-5.1p1+lpk/sshd_config.5
+--- openssh-5.1p1.orig/sshd_config.5 2008-07-02 05:35:43.000000000 -0700
++++ openssh-5.1p1+lpk/sshd_config.5 2008-08-23 14:36:21.000000000 -0700
+@@ -1003,6 +1003,62 @@
+ program.
+ The default is
+ .Pa /usr/X11R6/bin/xauth .
++.It Cm UseLPK
++Specifies whether LDAP public key retrieval must be used or not. It allow
++an easy centralisation of public keys within an LDAP directory. The argument must be
++.Dq yes
++or
++.Dq no .
++.It Cm LpkLdapConf
++Specifies whether LDAP Public keys should parse the specified ldap.conf file
++instead of sshd_config Tokens. The argument must be a valid path to an ldap.conf
++file like
++.Pa /etc/ldap.conf
++.It Cm LpkServers
++Specifies LDAP one or more [:space:] separated server's url the following form may be used:
++.Pp
++LpkServers ldaps://127.0.0.1 ldap://127.0.0.2 ldap://127.0.0.3
++.It Cm LpkUserDN
++Specifies the LDAP user DN.
++.Pp
++LpkUserDN ou=users,dc=phear,dc=org
++.It Cm LpkGroupDN
++Specifies the LDAP groups DN.
++.Pp
++LpkGroupDN ou=groups,dc=phear,dc=org
++.It Cm LpkBindDN
++Specifies the LDAP bind DN to use if necessary.
++.Pp
++LpkBindDN cn=Manager,dc=phear,dc=org
++.It Cm LpkBindPw
++Specifies the LDAP bind credential.
++.Pp
++LpkBindPw secret
++.It Cm LpkServerGroup
++Specifies one or more [:space:] separated group the server is part of.
++.Pp
++LpkServerGroup unix mail prod
++.It Cm LpkFilter
++Specifies an additional LDAP filter to use for finding SSH keys
++.Pp
++LpkFilter (hostAccess=master.phear.org)
++.It Cm LpkForceTLS
++Specifies if the LDAP server connection must be tried, forced or not used. The argument must be
++.Dq yes
++or
++.Dq no
++or
++.Dq try .
++.It Cm LpkSearchTimelimit
++Sepcifies the search time limit before the search is considered over. value is
++in seconds.
++.Pp
++LpkSearchTimelimit 3
++.It Cm LpkBindTimelimit
++Sepcifies the bind time limit before the connection is considered dead. value is
++in seconds.
++.Pp
++LpkBindTimelimit 3
+ .El
+ .Sh TIME FORMATS
+ .Xr sshd 8
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the devel
mailing list