[csw-devel] SF.net SVN: gar:[10284] csw/mgar/pkg/TEMPLATES/createpkg/Makefile.lib32

[theferret at users.sourceforge.net]

Revision: 10284
          http://gar.svn.sourceforge.net/gar/?rev=10284&view=rev
Author:   theferret
Date:     2010-06-22 20:19:15 +0000 (Tue, 22 Jun 2010)

Log Message:
-----------
TEMPLATES: Another optional Makefile

Added Paths:
-----------
    csw/mgar/pkg/TEMPLATES/createpkg/Makefile.lib32

Added: csw/mgar/pkg/TEMPLATES/createpkg/Makefile.lib32
===================================================================
--- csw/mgar/pkg/TEMPLATES/createpkg/Makefile.lib32	                        (rev 0)
+++ csw/mgar/pkg/TEMPLATES/createpkg/Makefile.lib32	2010-06-22 20:19:15 UTC (rev 10284)
@@ -0,0 +1,154 @@
+# This file is from TEMPLATES/createpkg/Makefile.lib
+# You MUST build this with gnu make, unfortunately.
+# Mainly just because of the ARCH expansion, but also for "?="
+
+# Customize your prototype file(s) as needed
+
+# Organization: variable defintions up top,
+# targets in second half.
+# Note that assignments with "?=" mean "assign if not already assigned.
+
+# Where do we keep local downloads of software src files
+ARCHIVEDIR ?= /home/src
+ARCHIVENAME ?= firefox-3.6.3.source.tar.bz2
+EXTRACTPROG ?= /usr/sfw/bin/gtar jfx
+
+# Only use ONE here. The name is used for compat with 'gar'.
+MASTER_SITES ?= http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/source/
+
+ARCH := $(shell /bin/uname -p)
+
+LDFLAGS_COMMON :=
+
+SRCDIR= build/*
+
+# DO NOT specify the arch-64 stuff such as -m64 here.
+# the individual targets will do that.
+
+CFLAGS_COMMON   ?= -mt -xnorunpath -xO2
+CXXFLAGS_COMMON ?= -mt -norunpath  -xO2
+CFLAGS_sparc    ?= -xarch=v8
+CFLAGS_i386     ?= -xarch=386
+
+# Keep this arch-neutral if possible. add arch-specific tweaks
+# to arch-specific target
+CONFIGURE=./configure --prefix=/opt/csw --enable-static=no
+
+
+
+CREATEPKG=createpkg -r `pwd`/build/*/cswstage
+
+
+all:	$(ARCH)-32
+#all:	$(ARCH)-32 package
+
+# ARCH-XX handles configure, build, and stage for its own combo
+# 
+
+EXTRACTPROG ?= /bin/echo ERROR: need to set EXTRACTPROG ; exit 1 ;
+
+
+
+extract:	build/.extract.done
+
+build/.extract.done:
+	test -d build || mkdir build
+	@if test -f  $(ARCHIVEDIR)/$(ARCHIVENAME) ; then \
+		echo Extracting $(ARCHIVENAME) under build dir... ;\
+		( cd build && $(EXTRACTPROG) $(ARCHIVEDIR)/$(ARCHIVENAME) ) ; \
+	else echo Cannot extract - $(ARCHIVEDIR)/$(ARCHIVENAME) does not exist ;\
+		exit 1; \
+	fi
+	touch build/.extract.done
+	
+
+clean distclean:
+	@echo Calling $@ in $(SRCDIR)
+	$(MAKE) -C $(SRCDIR) $@
+
+
+reallyclean:	distclean
+	@echo Removing any milestone files in build as well...
+	@rm -f build/.??*
+	@echo '(However, leaving src tree intact, with any patches in it)'
+	@echo '(If you want, you could rm -r build, then make extract once more)'
+
+garchive:
+	@echo Call the fetch target instead: it does the same thing.
+
+
+# Downloads the source code to the common ARCHIVEDIR
+fetch:	$(ARCHIVEDIR)/$(ARCHIVENAME)
+	@echo fetch done
+
+$(ARCHIVEDIR)/$(ARCHIVENAME):
+	wget -P $(ARCHIVEDIR) $(MASTER_SITES)/$(ARCHIVENAME)
+
+patch:
+	@echo patch: patching is handled automatically as part of the configure phase.
+
+package:
+	$(CREATEPKG)
+
+
+# split out generic $(ARCH) sections to platform-specific sections if needed.
+# but it usually should not be neccessary
+
+
+$(ARCH)-32 ::   configure-$(ARCH)-32 build-$(ARCH)-32 stage-$(ARCH)-32
+	@echo Completed $(ARCH)-32 configure, build and stage
+	touch build/.$(ARCH)-32.done
+
+
+
+build/.$(ARCH)-32.done:	$(ARCH)-32
+
+# Since we share the same src tree, we should only need to
+# pre-configure patching one time for all.
+build/.patch-preconf.done:	build/.extract.done
+	if test -f patchfile.preconf ; then \
+	 gpatch -d $(SRCDIR) -p0  <patchfile.preconf ; fi
+	touch $@
+
+
+#Note: I WANT to use LDFLAGS=-R$$ORIGIN, but stupid libtool
+# wont allow it! so force it at build time
+build/.configure-$(ARCH)-32.done:	build/.patch-preconf.done
+	@echo handling $@ target
+	(cd $(SRCDIR) ; \
+	  CFLAGS="$(CFLAGS_COMMON) $(CFLAGS_$(ARCH))" \
+	  CXXFLAGS="$(CXXFLAGS_COMMON)" \
+	  LDFLAGS='-R/opt/csw/lib -L/opt/csw/lib' \
+	  $(CONFIGURE) )
+	if test -f patchfile.postconf ; then \
+	 gpatch -d $(SRCDIR) -p0  <patchfile.postconf ; fi
+	touch $@
+
+
+# See note about LDFLAGS and ORIGIN, higher up	
+build/.build-$(ARCH)-32.done:
+	@echo handling $@ target
+	LD_OPTIONS='-R$$ORIGIN' $(MAKE) -C $(SRCDIR) $(MFLAGS)
+	touch $@
+
+
+
+## NOTE: This is a DESTRUCTIVE target build!!
+## 'stagepkg'  will destroy any prior "cswstage" directory!!!
+## So, we remove all 64bit milestones
+build/.stage-$(ARCH)-32.done:
+	@echo Handling stage of $(ARCH)-32
+	(cd $(SRCDIR) ; MAKE=gmake stagepkg)
+	(cd $(SRCDIR); cp COPYING cswstage/.)
+	@rm -f build/.*64.done
+	touch $@
+
+
+
+#These are the easy-to-type targets. They just trigger the real ones.
+configure-$(ARCH)-32:	build/.configure-$(ARCH)-32.done
+	@echo $@ done
+build-$(ARCH)-32:	build/.build-$(ARCH)-32.done
+	@echo $@ done
+stage-$(ARCH)-32:	build/.stage-$(ARCH)-32.done
+	@echo $@ done


This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.