SF.net SVN: gar:[25368] csw/mgar/pkg/zabbix/trunk
janholzh at users.sourceforge.net
janholzh at users.sourceforge.net
Tue Nov 10 14:16:42 CET 2015
Revision: 25368
http://sourceforge.net/p/gar/code/25368
Author: janholzh
Date: 2015-11-10 13:16:41 +0000 (Tue, 10 Nov 2015)
Log Message:
-----------
zabbix/trunk: add config and more smf
Modified Paths:
--------------
csw/mgar/pkg/zabbix/trunk/Makefile
csw/mgar/pkg/zabbix/trunk/files/CSWzabbix-agent.cswusergroup
Added Paths:
-----------
csw/mgar/pkg/zabbix/trunk/files/cswzabbix-proxy.xml
csw/mgar/pkg/zabbix/trunk/files/cswzabbix-server.xml
csw/mgar/pkg/zabbix/trunk/files/zabbix_agentd.conf
csw/mgar/pkg/zabbix/trunk/files/zabbix_proxy.conf
csw/mgar/pkg/zabbix/trunk/files/zabbix_server.conf
Modified: csw/mgar/pkg/zabbix/trunk/Makefile
===================================================================
--- csw/mgar/pkg/zabbix/trunk/Makefile 2015-11-10 11:29:06 UTC (rev 25367)
+++ csw/mgar/pkg/zabbix/trunk/Makefile 2015-11-10 13:16:41 UTC (rev 25368)
@@ -12,6 +12,11 @@
MASTER_SITES = $(SF_MIRROR)
DISTFILES = $(DISTNAME).tar.gz
DISTFILES += cswzabbix-agent.xml
+DISTFILES += cswzabbix-server.xml
+DISTFILES += cswzabbix-proxy.xml
+DISTFILES += zabbix_agentd.conf
+DISTFILES += zabbix_server.conf
+DISTFILES += zabbix_proxy.conf
GARCOMPILER = SOS12U3
@@ -22,10 +27,7 @@
REINPLACEMENTS += etc
REINPLACE_MATCH_etc = /usr/local/etc
REINPLACE_WITH_etc = $(sysconfdir)
-REINPLACE_FILES_etc += conf/zabbix_proxy.conf
-REINPLACE_FILES_etc += conf/zabbix_agentd.conf
REINPLACE_FILES_etc += conf/zabbix_agent.conf
-REINPLACE_FILES_etc += conf/zabbix_server.conf
# This is just for the server which is in 64 bit only on Solars 10
BUILD64-5.9 =
@@ -56,6 +58,7 @@
PKGFILES_CSWzabbix-server += $(sysconfdir)/zabbix_proxy\.conf\.d
PKGFILES_CSWzabbix-server += /opt/csw/share/zabbix/frontends/php/.*
PKGFILES_CSWzabbix-server += /opt/csw/share/zabbix/database/.*
+PKGFILES_CSWzabbix-server += /var/opt/csw/svc/manifest/cswzabbix-server\.xml
#RUNTIME_DEP_PKGS_CSWzabbix-server += CSWlibmysqlclient18
RUNTIME_DEP_PKGS_CSWzabbix-server += CSWzabbix-agent
RUNTIME_DEP_PKGS_CSWzabbix-server += CSWlibpq5
@@ -91,14 +94,17 @@
CHECKPKG_OVERRIDES_CSWzabbix-server += surplus-dependency|CSWzabbix-agent
CHECKPKG_OVERRIDES_CSWzabbix-server += surplus-dependency|CSWphp5-mbstring
CHECKPKG_OVERRIDES_CSWzabbix-server += surplus-dependency|CSWphp5-sockets
+CHECKPKG_OVERRIDES_CSWzabbix-server += file-with-bad-content|/usr/share|root/var/opt/csw/svc/manifest/cswzabbix-server.xml
+
PACKAGES += CSWzabbix-proxy
SPKG_DESC_CSWzabbix-proxy = Zabbix monitoring system proxy
PKGFILES_CSWzabbix-proxy += $(call baseisadirs,$(sbindir),zabbix_proxy)
PKGFILES_CSWzabbix-proxy += $(mandir)/man8/zabbix_proxy\.8
PKGFILES_CSWzabbix-proxy += $(sysconfdir)/zabbix_proxy\.conf\.CSW
PKGFILES_CSWzabbix-proxy += $(sysconfdir)/zabbix_proxy\.conf\.d
+PKGFILES_CSWzabbix-proxy += /var/opt/csw/svc/manifest/cswzabbix-proxy.xml
RUNTIME_DEP_PKGS_CSWzabbix-proxy += CSWzabbix-agent
RUNTIME_DEP_PKGS_CSWzabbix-proxy += CSWliblber2-4-2
RUNTIME_DEP_PKGS_CSWzabbix-proxy += CSWlibiconv2
@@ -116,7 +122,9 @@
RUNTIME_DEP_PKGS_CSWzabbix-proxy += CSWlibpq5
CHECKPKG_OVERRIDES_CSWzabbix-proxy += surplus-dependency|CSWzabbix-agent
+CHECKPKG_OVERRIDES_CSWzabbix-proxy += file-with-bad-content|/usr/share|root/var/opt/csw/svc/manifest/cswzabbix-proxy.xml
+
# Config files are in 64bit build
MERGE_SCRIPTS_isa-default64 = copy-relocate
@@ -166,16 +174,22 @@
PROTOTYPE_MODIFIERS += smf
PROTOTYPE_FILES_smf += /var/opt/csw/svc/manifest/cswzabbix-agent.xml
+PROTOTYPE_FILES_smf += /var/opt/csw/svc/manifest/cswzabbix-server.xml
+PROTOTYPE_FILES_smf += /var/opt/csw/svc/manifest/cswzabbix-proxy.xml
PROTOTYPE_CLASS_smf = manifest
include gar/category.mk
post-install-modulated:
ginstall -d $(DESTDIR)/opt/csw/share/zabbix/frontends
- ginstall -d $(DESTDIR)/etc/opt/csw/pkg/CSWzabbix-agent
- ginstall -m 644 $(FILEDIR)/CSWzabbix-agent.cswusergroup $(DESTDIR)/etc/opt/csw/pkg/CSWzabbix-agent/cswusergroup
cp -r $(WORKDIR)/zabbix-$(VERSION)/frontends/php $(DESTDIR)/opt/csw/share/zabbix/frontends
cp -r $(WORKDIR)/zabbix-$(VERSION)/database $(DESTDIR)/opt/csw/share/zabbix/
rm $(DESTDIR)/opt/csw/share/zabbix/database/Make*
+ ginstall -D -m 0644 $(FILEDIR)/CSWzabbix-agent.cswusergroup $(DESTDIR)/etc/opt/csw/pkg/CSWzabbix-agent/cswusergroup
ginstall -D -m 0644 $(WORKDIR)/cswzabbix-agent.xml $(DESTDIR)/var/opt/csw/svc/manifest/cswzabbix-agent.xml
+ ginstall -D -m 0644 $(WORKDIR)/cswzabbix-server.xml $(DESTDIR)/var/opt/csw/svc/manifest/cswzabbix-server.xml
+ ginstall -D -m 0644 $(WORKDIR)/cswzabbix-proxy.xml $(DESTDIR)/var/opt/csw/svc/manifest/cswzabbix-proxy.xml
+ ginstall -D -m 0644 $(WORKDIR)/zabbix_agentd.conf $(DESTDIR)/etc/opt/csw/zabbix_agentd.conf
+ ginstall -D -m 0644 $(WORKDIR)/zabbix_server.conf $(DESTDIR)/etc/opt/csw/zabbix_server.conf
+ ginstall -D -m 0644 $(WORKDIR)/zabbix_proxy.conf $(DESTDIR)/etc/opt/csw/zabbix_proxy.conf
@$(MAKECOOKIE)
Modified: csw/mgar/pkg/zabbix/trunk/files/CSWzabbix-agent.cswusergroup
===================================================================
--- csw/mgar/pkg/zabbix/trunk/files/CSWzabbix-agent.cswusergroup 2015-11-10 11:29:06 UTC (rev 25367)
+++ csw/mgar/pkg/zabbix/trunk/files/CSWzabbix-agent.cswusergroup 2015-11-10 13:16:41 UTC (rev 25368)
@@ -1 +1 @@
-zabbix:zabbix:::::
+zabbix:zabbix:CSW zabbix User:/:/bin/false:::NP
Added: csw/mgar/pkg/zabbix/trunk/files/cswzabbix-proxy.xml
===================================================================
(Binary files differ)
Index: csw/mgar/pkg/zabbix/trunk/files/cswzabbix-proxy.xml
===================================================================
--- csw/mgar/pkg/zabbix/trunk/files/cswzabbix-proxy.xml 2015-11-10 11:29:06 UTC (rev 25367)
+++ csw/mgar/pkg/zabbix/trunk/files/cswzabbix-proxy.xml 2015-11-10 13:16:41 UTC (rev 25368)
Property changes on: csw/mgar/pkg/zabbix/trunk/files/cswzabbix-proxy.xml
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/xml
\ No newline at end of property
Added: csw/mgar/pkg/zabbix/trunk/files/cswzabbix-server.xml
===================================================================
(Binary files differ)
Index: csw/mgar/pkg/zabbix/trunk/files/cswzabbix-server.xml
===================================================================
--- csw/mgar/pkg/zabbix/trunk/files/cswzabbix-server.xml 2015-11-10 11:29:06 UTC (rev 25367)
+++ csw/mgar/pkg/zabbix/trunk/files/cswzabbix-server.xml 2015-11-10 13:16:41 UTC (rev 25368)
Property changes on: csw/mgar/pkg/zabbix/trunk/files/cswzabbix-server.xml
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/xml
\ No newline at end of property
Added: csw/mgar/pkg/zabbix/trunk/files/zabbix_agentd.conf
===================================================================
--- csw/mgar/pkg/zabbix/trunk/files/zabbix_agentd.conf (rev 0)
+++ csw/mgar/pkg/zabbix/trunk/files/zabbix_agentd.conf 2015-11-10 13:16:41 UTC (rev 25368)
@@ -0,0 +1,294 @@
+# This is a config file for the Zabbix agent daemon (Unix)
+# To get more information about Zabbix, visit http://www.zabbix.com
+
+############ GENERAL PARAMETERS #################
+
+### Option: PidFile
+# Name of PID file.
+#
+# Mandatory: no
+# Default:
+PidFile=/var/run/zabbix_agentd.pid
+
+### Option: LogFile
+# Name of log file.
+# If not set, syslog is used.
+#
+# Mandatory: no
+# Default:
+# LogFile=
+
+LogFile=/var/adm/zabbix_agentd.log
+
+### Option: LogFileSize
+# Maximum size of log file in MB.
+# 0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
+### Option: DebugLevel
+# Specifies debug level
+# 0 - basic information about starting and stopping of Zabbix processes
+# 1 - critical information
+# 2 - error information
+# 3 - warnings
+# 4 - for debugging (produces lots of information)
+#
+# Mandatory: no
+# Range: 0-4
+# Default:
+# DebugLevel=3
+
+### Option: SourceIP
+# Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: EnableRemoteCommands
+# Whether remote commands from Zabbix server are allowed.
+# 0 - not allowed
+# 1 - allowed
+#
+# Mandatory: no
+# Default:
+# EnableRemoteCommands=0
+
+### Option: LogRemoteCommands
+# Enable logging of executed shell commands as warnings.
+# 0 - disabled
+# 1 - enabled
+#
+# Mandatory: no
+# Default:
+# LogRemoteCommands=0
+
+##### Passive checks related
+
+### Option: Server
+# List of comma delimited IP addresses (or hostnames) of Zabbix servers.
+# Incoming connections will be accepted only from the hosts listed here.
+# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
+#
+# Mandatory: no
+# Default:
+# Server=
+
+Server=127.0.0.1
+
+### Option: ListenPort
+# Agent will listen on this port for connections from the server.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10050
+
+### Option: ListenIP
+# List of comma delimited IP addresses that the agent should listen on.
+# First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+### Option: StartAgents
+# Number of pre-forked instances of zabbix_agentd that process passive checks.
+# If set to 0, disables passive checks and the agent will not listen on any TCP port.
+#
+# Mandatory: no
+# Range: 0-100
+# Default:
+# StartAgents=3
+
+##### Active checks related
+
+### Option: ServerActive
+# List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers for active checks.
+# If port is not specified, default port is used.
+# IPv6 addresses must be enclosed in square brackets if port for that host is specified.
+# If port is not specified, square brackets for IPv6 addresses are optional.
+# If this parameter is not specified, active checks are disabled.
+# Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
+#
+# Mandatory: no
+# Default:
+# ServerActive=
+
+ServerActive=127.0.0.1
+
+### Option: Hostname
+# Unique, case sensitive hostname.
+# Required for active checks and must match hostname as configured on the server.
+# Value is acquired from HostnameItem if undefined.
+#
+# Mandatory: no
+# Default:
+# Hostname=
+
+Hostname=
+
+### Option: HostnameItem
+# Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
+# Does not support UserParameters or aliases.
+#
+# Mandatory: no
+# Default:
+# HostnameItem=system.hostname
+
+### Option: HostMetadata
+# Optional parameter that defines host metadata.
+# Host metadata is used at host auto-registration process.
+# An agent will issue an error and not start if the value is over limit of 255 characters.
+# If not defined, value will be acquired from HostMetadataItem.
+#
+# Mandatory: no
+# Range: 0-255 characters
+# Default:
+# HostMetadata=
+
+### Option: HostMetadataItem
+# Optional parameter that defines an item used for getting host metadata.
+# Host metadata is used at host auto-registration process.
+# During an auto-registration request an agent will log a warning message if
+# the value returned by specified item is over limit of 255 characters.
+# This option is only used when HostMetadata is not defined.
+#
+# Mandatory: no
+# Default:
+# HostMetadataItem=
+
+### Option: RefreshActiveChecks
+# How often list of active checks is refreshed, in seconds.
+#
+# Mandatory: no
+# Range: 60-3600
+# Default:
+# RefreshActiveChecks=120
+
+### Option: BufferSend
+# Do not keep data longer than N seconds in buffer.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# BufferSend=5
+
+### Option: BufferSize
+# Maximum number of values in a memory buffer. The agent will send
+# all collected data to Zabbix Server or Proxy if the buffer is full.
+#
+# Mandatory: no
+# Range: 2-65535
+# Default:
+# BufferSize=100
+
+### Option: MaxLinesPerSecond
+# Maximum number of new lines the agent will send per second to Zabbix Server
+# or Proxy processing 'log' and 'logrt' active checks.
+# The provided value will be overridden by the parameter 'maxlines',
+# provided in 'log' or 'logrt' item keys.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# MaxLinesPerSecond=100
+
+############ ADVANCED PARAMETERS #################
+
+### Option: Alias
+# Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
+# Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
+# Different Alias keys may reference the same item key.
+# For example, to retrieve the ID of user 'zabbix':
+# Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
+# Now shorthand key zabbix.userid may be used to retrieve data.
+# Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
+#
+# Mandatory: no
+# Range:
+# Default:
+
+### Option: Timeout
+# Spend no more than Timeout seconds on processing
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+### Option: AllowRoot
+# Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
+# will try to switch to the user specified by the User configuration option instead.
+# Has no effect if started under a regular user.
+# 0 - do not allow
+# 1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+### Option: User
+# Drop privileges to a specific, existing user on the system.
+# Only has effect if run as 'root' and AllowRoot is disabled.
+#
+# Mandatory: no
+# Default:
+# User=zabbix
+
+### Option: Include
+# You may include individual files or all files in a directory in the configuration file.
+# Installing Zabbix will create include directory in /etc/opt/csw, unless modified during the compile time.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/etc/opt/csw/zabbix_agentd.userparams.conf
+# Include=/etc/opt/csw/zabbix_agentd.conf.d/
+# Include=/etc/opt/csw/zabbix_agentd.conf.d/*.conf
+
+####### USER-DEFINED MONITORED PARAMETERS #######
+
+### Option: UnsafeUserParameters
+# Allow all characters to be passed in arguments to user-defined parameters.
+# 0 - do not allow
+# 1 - allow
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# UnsafeUserParameters=0
+
+### Option: UserParameter
+# User-defined parameter to monitor. There can be several user-defined parameters.
+# Format: UserParameter=<key>,<shell command>
+# See 'zabbix_agentd' directory for examples.
+#
+# Mandatory: no
+# Default:
+# UserParameter=
+
+####### LOADABLE MODULES #######
+
+### Option: LoadModulePath
+# Full path to location of agent modules.
+# Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# LoadModulePath=${libdir}/modules
+
+### Option: LoadModule
+# Module to load at agent startup. Modules are used to extend functionality of the agent.
+# Format: LoadModule=<module.so>
+# The modules must be located in directory specified by LoadModulePath.
+# It is allowed to include multiple LoadModule parameters.
+#
+# Mandatory: no
+# Default:
+# LoadModule=
Added: csw/mgar/pkg/zabbix/trunk/files/zabbix_proxy.conf
===================================================================
--- csw/mgar/pkg/zabbix/trunk/files/zabbix_proxy.conf (rev 0)
+++ csw/mgar/pkg/zabbix/trunk/files/zabbix_proxy.conf 2015-11-10 13:16:41 UTC (rev 25368)
@@ -0,0 +1,575 @@
+# This is a configuration file for Zabbix Proxy process
+# To get more information about Zabbix,
+# visit http://www.zabbix.com
+
+############ GENERAL PARAMETERS #################
+
+### Option: ProxyMode
+# Proxy operating mode
+# 0 - proxy in the active mode
+# 1 - proxy in the passive mode
+#
+# Mandatory: no
+# Default:
+# ProxyMode=0
+
+### Option: Server
+# IP address (or hostname) of Zabbix server.
+# Active proxy will get configuration data from the server.
+# For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: yes (if ProxyMode is set to 0)
+# Default:
+# Server=
+
+Server=127.0.0.1
+
+### Option: ServerPort
+# Port of Zabbix trapper on Zabbix server.
+# For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ServerPort=10051
+
+### Option: Hostname
+# Unique, case sensitive Proxy name. Make sure the Proxy name is known to the server!
+# Value is acquired from HostnameItem if undefined.
+#
+# Mandatory: no
+# Default:
+# Hostname=
+
+Hostname=
+
+### Option: HostnameItem
+# Item used for generating Hostname if it is undefined.
+# Ignored if Hostname is defined.
+#
+# Mandatory: no
+# Default:
+# HostnameItem=system.hostname
+
+### Option: ListenPort
+# Listen port for trapper.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10051
+
+### Option: SourceIP
+# Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: LogFile
+# Name of log file.
+# If not set, syslog is used.
+#
+# Mandatory: no
+# Default:
+# LogFile=
+
+LogFile=/var/adm/zabbix_proxy.log
+
+### Option: LogFileSize
+# Maximum size of log file in MB.
+# 0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
+### Option: DebugLevel
+# Specifies debug level
+# 0 - basic information about starting and stopping of Zabbix processes
+# 1 - critical information
+# 2 - error information
+# 3 - warnings
+# 4 - for debugging (produces lots of information)
+#
+# Mandatory: no
+# Range: 0-4
+# Default:
+# DebugLevel=3
+
+### Option: PidFile
+# Name of PID file.
+#
+# Mandatory: no
+# Default:
+PidFile=/var/run/zabbix_proxy.pid
+
+### Option: DBHost
+# Database host name.
+# If set to localhost, socket is used for MySQL.
+# If set to empty string, socket is used for PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBHost=localhost
+
+### Option: DBName
+# Database name.
+# For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
+# Warning: do not attempt to use the same database Zabbix server is using.
+#
+# Mandatory: yes
+# Default:
+# DBName=
+
+DBName=zabbix_proxy
+
+### Option: DBSchema
+# Schema name. Used for IBM DB2 and PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBSchema=
+
+### Option: DBUser
+# Database user. Ignored for SQLite.
+#
+# Default:
+# DBUser=
+
+DBUser=root
+
+### Option: DBPassword
+# Database password. Ignored for SQLite.
+# Comment this line if no password is used.
+#
+# Mandatory: no
+# Default:
+# DBPassword=
+
+### Option: DBSocket
+# Path to MySQL socket.
+#
+# Mandatory: no
+# Default:
+# DBSocket=/tmp/mysql.sock
+
+# Option: DBPort
+# Database port when not using local socket. Ignored for SQLite.
+#
+# Mandatory: no
+# Default (for MySQL):
+# DBPort=3306
+
+######### PROXY SPECIFIC PARAMETERS #############
+
+### Option: ProxyLocalBuffer
+# Proxy will keep data locally for N hours, even if the data have already been synced with the server.
+# This parameter may be used if local data will be used by third party applications.
+#
+# Mandatory: no
+# Range: 0-720
+# Default:
+# ProxyLocalBuffer=0
+
+### Option: ProxyOfflineBuffer
+# Proxy will keep data for N hours in case if no connectivity with Zabbix Server.
+# Older data will be lost.
+#
+# Mandatory: no
+# Range: 1-720
+# Default:
+# ProxyOfflineBuffer=1
+
+### Option: HeartbeatFrequency
+# Frequency of heartbeat messages in seconds.
+# Used for monitoring availability of Proxy on server side.
+# 0 - heartbeat messages disabled.
+# For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 0-3600
+# Default:
+# HeartbeatFrequency=60
+
+### Option: ConfigFrequency
+# How often proxy retrieves configuration data from Zabbix Server in seconds.
+# For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1-3600*24*7
+# Default:
+# ConfigFrequency=3600
+
+### Option: DataSenderFrequency
+# Proxy will send collected data to the Server every N seconds.
+# For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# DataSenderFrequency=1
+
+############ ADVANCED PARAMETERS ################
+
+### Option: StartPollers
+# Number of pre-forked instances of pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollers=5
+
+### Option: StartIPMIPollers
+# Number of pre-forked instances of IPMI pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartIPMIPollers=0
+
+### Option: StartPollersUnreachable
+# Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
+# At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
+# are started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollersUnreachable=1
+
+### Option: StartTrappers
+# Number of pre-forked instances of trappers.
+# Trappers accept incoming connections from Zabbix sender and active agents.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartTrappers=5
+
+### Option: StartPingers
+# Number of pre-forked instances of ICMP pingers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPingers=1
+
+### Option: StartDiscoverers
+# Number of pre-forked instances of discoverers.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartDiscoverers=1
+
+### Option: StartHTTPPollers
+# Number of pre-forked instances of HTTP pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHTTPPollers=1
+
+### Option: JavaGateway
+# IP address (or hostname) of Zabbix Java gateway.
+# Only required if Java pollers are started.
+#
+# Mandatory: no
+# Default:
+# JavaGateway=
+
+### Option: JavaGatewayPort
+# Port that Zabbix Java gateway listens on.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# JavaGatewayPort=10052
+
+### Option: StartJavaPollers
+# Number of pre-forked instances of Java pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartJavaPollers=0
+
+### Option: StartVMwareCollectors
+# Number of pre-forked vmware collector instances.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartVMwareCollectors=0
+
+### Option: VMwareFrequency
+# How often Zabbix will connect to VMware service to obtain a new data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwareFrequency=60
+
+### Option: VMwarePerfFrequency
+# How often Zabbix will connect to VMware service to obtain performance data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwarePerfFrequency=60
+
+### Option: VMwareCacheSize
+# Size of VMware cache, in bytes.
+# Shared memory size for storing VMware data.
+# Only used if VMware collectors are started.
+#
+# Mandatory: no
+# Range: 256K-2G
+# Default:
+# VMwareCacheSize=8M
+
+### Option: VMwareTimeout
+# Specifies how many seconds vmware collector waits for response from VMware service.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# VMwareTimeout=10
+
+### Option: SNMPTrapperFile
+# Temporary file used for passing data from SNMP trap daemon to the proxy.
+# Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
+#
+# Mandatory: no
+# Default:
+# SNMPTrapperFile=/tmp/zabbix_traps.tmp
+
+### Option: StartSNMPTrapper
+# If 1, SNMP trapper process is started.
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# StartSNMPTrapper=0
+
+### Option: ListenIP
+# List of comma delimited IP addresses that the trapper should listen on.
+# Trapper will listen on all network interfaces if this parameter is missing.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+### Option: HousekeepingFrequency
+# How often Zabbix will perform housekeeping procedure (in hours).
+# Housekeeping is removing outdated information from the database.
+# To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
+# hours of outdated information are deleted in one housekeeping cycle.
+# To lower load on proxy startup housekeeping is postponed for 30 minutes after proxy start.
+#
+# Mandatory: no
+# Range: 1-24
+# Default:
+# HousekeepingFrequency=1
+
+### Option: CacheSize
+# Size of configuration cache, in bytes.
+# Shared memory size, for storing hosts and items data.
+#
+# Mandatory: no
+# Range: 128K-8G
+# Default:
+# CacheSize=8M
+
+### Option: StartDBSyncers
+# Number of pre-forked instances of DB Syncers
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartDBSyncers=4
+
+### Option: HistoryCacheSize
+# Size of history cache, in bytes.
+# Shared memory size for storing history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryCacheSize=8M
+
+### Option: HistoryTextCacheSize
+# Size of text history cache, in bytes.
+# Shared memory size for storing character, text or log history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryTextCacheSize=16M
+
+### Option: Timeout
+# Specifies how long we wait for agent, SNMP device or external check (in seconds).
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+### Option: TrapperTimeout
+# Specifies how many seconds trapper may spend processing new data.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# TrapperTimeout=300
+
+### Option: UnreachablePeriod
+# After how many seconds of unreachability treat a host as unavailable.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachablePeriod=45
+
+### Option: UnavailableDelay
+# How often host is checked for availability during the unavailability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnavailableDelay=60
+
+### Option: UnreachableDelay
+# How often host is checked for availability during the unreachability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachableDelay=15
+
+### Option: ExternalScripts
+# Full path to location of external scripts.
+# Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# ExternalScripts=${datadir}/zabbix/externalscripts
+
+### Option: FpingLocation
+# Location of fping.
+# Make sure that fping binary has root ownership and SUID flag set.
+#
+# Mandatory: no
+# Default:
+# FpingLocation=/usr/sbin/fping
+
+### Option: Fping6Location
+# Location of fping6.
+# Make sure that fping6 binary has root ownership and SUID flag set.
+# Make empty if your fping utility is capable to process IPv6 addresses.
+#
+# Mandatory: no
+# Default:
+# Fping6Location=/usr/sbin/fping6
+
+### Option: SSHKeyLocation
+# Location of public and private keys for SSH checks and actions.
+#
+# Mandatory: no
+# Default:
+# SSHKeyLocation=
+
+### Option: LogSlowQueries
+# How long a database query may take before being logged (in milliseconds).
+# Only works if DebugLevel set to 3 or 4.
+# 0 - don't log slow queries.
+#
+# Mandatory: no
+# Range: 1-3600000
+# Default:
+# LogSlowQueries=0
+
+### Option: TmpDir
+# Temporary directory.
+#
+# Mandatory: no
+# Default:
+# TmpDir=/tmp
+
+### Option: AllowRoot
+# Allow the proxy to run as 'root'. If disabled and the proxy is started by 'root', the proxy
+# will try to switch to the user specified by the User configuration option instead.
+# Has no effect if started under a regular user.
+# 0 - do not allow
+# 1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+### Option: User
+# Drop privileges to a specific, existing user on the system.
+# Only has effect if run as 'root' and AllowRoot is disabled.
+#
+# Mandatory: no
+# Default:
+# User=zabbix
+
+### Option: Include
+# You may include individual files or all files in a directory in the configuration file.
+# Installing Zabbix will create include directory in /etc/opt/csw, unless modified during the compile time.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/etc/opt/csw/zabbix_proxy.general.conf
+# Include=/etc/opt/csw/zabbix_proxy.conf.d/
+# Include=/etc/opt/csw/zabbix_proxy.conf.d/*.conf
+
+### Option: SSLCertLocation
+# Location of SSL client certificates.
+# This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCertLocation=${datadir}/zabbix/ssl/certs
+
+### Option: SSLKeyLocation
+# Location of private keys for SSL client certificates.
+# This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLKeyLocation=${datadir}/zabbix/ssl/keys
+
+### Option: SSLCALocation
+# Location of certificate authority (CA) files for SSL server certificate verification.
+# If not set, system-wide directory will be used.
+# This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCALocation=
+
+####### LOADABLE MODULES #######
+
+### Option: LoadModulePath
+# Full path to location of proxy modules.
+# Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# LoadModulePath=${libdir}/modules
+
+### Option: LoadModule
+# Module to load at proxy startup. Modules are used to extend functionality of the proxy.
+# Format: LoadModule=<module.so>
+# The modules must be located in directory specified by LoadModulePath.
+# It is allowed to include multiple LoadModule parameters.
+#
+# Mandatory: no
+# Default:
+# LoadModule=
Added: csw/mgar/pkg/zabbix/trunk/files/zabbix_server.conf
===================================================================
--- csw/mgar/pkg/zabbix/trunk/files/zabbix_server.conf (rev 0)
+++ csw/mgar/pkg/zabbix/trunk/files/zabbix_server.conf 2015-11-10 13:16:41 UTC (rev 25368)
@@ -0,0 +1,576 @@
+# This is a configuration file for Zabbix Server process
+# To get more information about Zabbix,
+# visit http://www.zabbix.com
+
+############ GENERAL PARAMETERS #################
+
+### Option: ListenPort
+# Listen port for trapper.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10051
+
+### Option: SourceIP
+# Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: LogFile
+# Name of log file.
+# If not set, syslog is used.
+#
+# Mandatory: no
+# Default:
+# LogFile=
+
+LogFile=/var/adm/zabbix_server.log
+
+### Option: LogFileSize
+# Maximum size of log file in MB.
+# 0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
+### Option: DebugLevel
+# Specifies debug level
+# 0 - basic information about starting and stopping of Zabbix processes
+# 1 - critical information
+# 2 - error information
+# 3 - warnings
+# 4 - for debugging (produces lots of information)
+#
+# Mandatory: no
+# Range: 0-4
+# Default:
+# DebugLevel=3
+
+### Option: PidFile
+# Name of PID file.
+#
+# Mandatory: no
+# Default:
+PidFile=/var/run/zabbix_server.pid
+
+### Option: DBHost
+# Database host name.
+# If set to localhost, socket is used for MySQL.
+# If set to empty string, socket is used for PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBHost=localhost
+
+### Option: DBName
+# Database name.
+# For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
+#
+# Mandatory: yes
+# Default:
+# DBName=
+
+DBName=zabbix
+
+### Option: DBSchema
+# Schema name. Used for IBM DB2 and PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBSchema=
+
+### Option: DBUser
+# Database user. Ignored for SQLite.
+#
+# Mandatory: no
+# Default:
+# DBUser=
+
+DBUser=root
+
+### Option: DBPassword
+# Database password. Ignored for SQLite.
+# Comment this line if no password is used.
+#
+# Mandatory: no
+# Default:
+# DBPassword=
+
+### Option: DBSocket
+# Path to MySQL socket.
+#
+# Mandatory: no
+# Default:
+# DBSocket=/tmp/mysql.sock
+
+### Option: DBPort
+# Database port when not using local socket. Ignored for SQLite.
+#
+# Mandatory: no
+# Range: 1024-65535
+# Default (for MySQL):
+# DBPort=3306
+
+############ ADVANCED PARAMETERS ################
+
+### Option: StartPollers
+# Number of pre-forked instances of pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollers=5
+
+### Option: StartIPMIPollers
+# Number of pre-forked instances of IPMI pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartIPMIPollers=0
+
+### Option: StartPollersUnreachable
+# Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
+# At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
+# are started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollersUnreachable=1
+
+### Option: StartTrappers
+# Number of pre-forked instances of trappers.
+# Trappers accept incoming connections from Zabbix sender, active agents and active proxies.
+# At least one trapper process must be running to display server availability and view queue
+# in the frontend.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartTrappers=5
+
+### Option: StartPingers
+# Number of pre-forked instances of ICMP pingers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPingers=1
+
+### Option: StartDiscoverers
+# Number of pre-forked instances of discoverers.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartDiscoverers=1
+
+### Option: StartHTTPPollers
+# Number of pre-forked instances of HTTP pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHTTPPollers=1
+
+### Option: StartTimers
+# Number of pre-forked instances of timers.
+# Timers process time-based trigger functions and maintenance periods.
+# Only the first timer process handles the maintenance periods.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# StartTimers=1
+
+### Option: JavaGateway
+# IP address (or hostname) of Zabbix Java gateway.
+# Only required if Java pollers are started.
+#
+# Mandatory: no
+# Default:
+# JavaGateway=
+
+### Option: JavaGatewayPort
+# Port that Zabbix Java gateway listens on.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# JavaGatewayPort=10052
+
+### Option: StartJavaPollers
+# Number of pre-forked instances of Java pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartJavaPollers=0
+
+### Option: StartVMwareCollectors
+# Number of pre-forked vmware collector instances.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartVMwareCollectors=0
+
+### Option: VMwareFrequency
+# How often Zabbix will connect to VMware service to obtain a new data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwareFrequency=60
+
+### Option: VMwarePerfFrequency
+# How often Zabbix will connect to VMware service to obtain performance data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwarePerfFrequency=60
+
+### Option: VMwareCacheSize
+# Size of VMware cache, in bytes.
+# Shared memory size for storing VMware data.
+# Only used if VMware collectors are started.
+#
+# Mandatory: no
+# Range: 256K-2G
+# Default:
+# VMwareCacheSize=8M
+
+### Option: VMwareTimeout
+# Specifies how many seconds vmware collector waits for response from VMware service.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# VMwareTimeout=10
+
+### Option: SNMPTrapperFile
+# Temporary file used for passing data from SNMP trap daemon to the server.
+# Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
+#
+# Mandatory: no
+# Default:
+# SNMPTrapperFile=/tmp/zabbix_traps.tmp
+
+### Option: StartSNMPTrapper
+# If 1, SNMP trapper process is started.
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# StartSNMPTrapper=0
+
+### Option: ListenIP
+# List of comma delimited IP addresses that the trapper should listen on.
+# Trapper will listen on all network interfaces if this parameter is missing.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+# ListenIP=127.0.0.1
+
+### Option: HousekeepingFrequency
+# How often Zabbix will perform housekeeping procedure (in hours).
+# Housekeeping is removing outdated information from the database.
+# To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
+# hours of outdated information are deleted in one housekeeping cycle, for each item.
+# To lower load on server startup housekeeping is postponed for 30 minutes after server start.
+#
+# Mandatory: no
+# Range: 1-24
+# Default:
+# HousekeepingFrequency=1
+
+### Option: MaxHousekeeperDelete
+# The table "housekeeper" contains "tasks" for housekeeping procedure in the format:
+# [housekeeperid], [tablename], [field], [value].
+# No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])
+# will be deleted per one task in one housekeeping cycle.
+# SQLite3 does not use this parameter, deletes all corresponding rows without a limit.
+# If set to 0 then no limit is used at all. In this case you must know what you are doing!
+#
+# Mandatory: no
+# Range: 0-1000000
+# Default:
+# MaxHousekeeperDelete=500
+
+### Option: SenderFrequency
+# How often Zabbix will try to send unsent alerts (in seconds).
+#
+# Mandatory: no
+# Range: 5-3600
+# Default:
+# SenderFrequency=30
+
+### Option: CacheSize
+# Size of configuration cache, in bytes.
+# Shared memory size for storing host, item and trigger data.
+#
+# Mandatory: no
+# Range: 128K-8G
+# Default:
+# CacheSize=8M
+
+### Option: CacheUpdateFrequency
+# How often Zabbix will perform update of configuration cache, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# CacheUpdateFrequency=60
+
+### Option: StartDBSyncers
+# Number of pre-forked instances of DB Syncers
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartDBSyncers=4
+
+### Option: HistoryCacheSize
+# Size of history cache, in bytes.
+# Shared memory size for storing history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryCacheSize=8M
+
+### Option: TrendCacheSize
+# Size of trend cache, in bytes.
+# Shared memory size for storing trends data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# TrendCacheSize=4M
+
+### Option: HistoryTextCacheSize
+# Size of text history cache, in bytes.
+# Shared memory size for storing character, text or log history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryTextCacheSize=16M
+
+### Option: ValueCacheSize
+# Size of history value cache, in bytes.
+# Shared memory size for caching item history data requests.
+# Setting to 0 disables value cache.
+#
+# Mandatory: no
+# Range: 0,128K-64G
+# Default:
+# ValueCacheSize=8M
+
+### Option: Timeout
+# Specifies how long we wait for agent, SNMP device or external check (in seconds).
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+### Option: TrapperTimeout
+# Specifies how many seconds trapper may spend processing new data.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# TrapperTimeout=300
+
+### Option: UnreachablePeriod
+# After how many seconds of unreachability treat a host as unavailable.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachablePeriod=45
+
+### Option: UnavailableDelay
+# How often host is checked for availability during the unavailability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnavailableDelay=60
+
+### Option: UnreachableDelay
+# How often host is checked for availability during the unreachability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachableDelay=15
+
+### Option: AlertScriptsPath
+# Full path to location of custom alert scripts.
+# Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# AlertScriptsPath=${datadir}/zabbix/alertscripts
+
+### Option: ExternalScripts
+# Full path to location of external scripts.
+# Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# ExternalScripts=${datadir}/zabbix/externalscripts
+
+### Option: FpingLocation
+# Location of fping.
+# Make sure that fping binary has root ownership and SUID flag set.
+#
+# Mandatory: no
+# Default:
+# FpingLocation=/usr/sbin/fping
+
+### Option: Fping6Location
+# Location of fping6.
+# Make sure that fping6 binary has root ownership and SUID flag set.
+# Make empty if your fping utility is capable to process IPv6 addresses.
+#
+# Mandatory: no
+# Default:
+# Fping6Location=/usr/sbin/fping6
+
+### Option: SSHKeyLocation
+# Location of public and private keys for SSH checks and actions.
+#
+# Mandatory: no
+# Default:
+# SSHKeyLocation=
+
+### Option: LogSlowQueries
+# How long a database query may take before being logged (in milliseconds).
+# Only works if DebugLevel set to 3 or 4.
+# 0 - don't log slow queries.
+#
+# Mandatory: no
+# Range: 1-3600000
+# Default:
+# LogSlowQueries=0
+
+### Option: TmpDir
+# Temporary directory.
+#
+# Mandatory: no
+# Default:
+# TmpDir=/tmp
+
+### Option: StartProxyPollers
+# Number of pre-forked instances of pollers for passive proxies.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartProxyPollers=1
+
+### Option: ProxyConfigFrequency
+# How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
+# This parameter is used only for proxies in the passive mode.
+#
+# Mandatory: no
+# Range: 1-3600*24*7
+# Default:
+# ProxyConfigFrequency=3600
+
+### Option: ProxyDataFrequency
+# How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
+# This parameter is used only for proxies in the passive mode.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# ProxyDataFrequency=1
+
+### Option: AllowRoot
+# Allow the server to run as 'root'. If disabled and the server is started by 'root', the server
+# will try to switch to the user specified by the User configuration option instead.
+# Has no effect if started under a regular user.
+# 0 - do not allow
+# 1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+### Option: User
+# Drop privileges to a specific, existing user on the system.
+# Only has effect if run as 'root' and AllowRoot is disabled.
+#
+# Mandatory: no
+# Default:
+# User=zabbix
+
+### Option: Include
+# You may include individual files or all files in a directory in the configuration file.
+# Installing Zabbix will create include directory in /etc/opt/csw, unless modified during the compile time.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/etc/opt/csw/zabbix_server.general.conf
+# Include=/etc/opt/csw/zabbix_server.conf.d/
+# Include=/etc/opt/csw/zabbix_server.conf.d/*.conf
+
+### Option: SSLCertLocation
+# Location of SSL client certificates.
+# This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCertLocation=${datadir}/zabbix/ssl/certs
+
+### Option: SSLKeyLocation
+# Location of private keys for SSL client certificates.
+# This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLKeyLocation=${datadir}/zabbix/ssl/keys
+
+### Option: SSLCALocation
+# Override the location of certificate authority (CA) files for SSL server certificate verification.
+# If not set, system-wide directory will be used.
+# This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCALocation=
+
+####### LOADABLE MODULES #######
+
+### Option: LoadModulePath
+# Full path to location of server modules.
+# Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# LoadModulePath=${libdir}/modules
+
+### Option: LoadModule
+# Module to load at server startup. Modules are used to extend functionality of the server.
+# Format: LoadModule=<module.so>
+# The modules must be located in directory specified by LoadModulePath.
+# It is allowed to include multiple LoadModule parameters.
+#
+# Mandatory: no
+# Default:
+# LoadModule=
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the devel
mailing list