[csw-users] problems with cdrecord

Dan O'Callaghan ocalld at cogent-dsn.com
Thu Nov 4 12:56:23 CET 2004

since upgrading to latest version of cdrecord i'm having problems
burning disks.

is anyone else having problems? 
i'm using a freecom usb dvd/cd writer. works ok with windows and did
work ok prior to upgrade. usb port on sunblade 1500 works ok with mem
sticks - so usb port is ok.

any ideas?
error below.

Blocks total: 359849 Blocks current: 359849 Blocks remaining: 329361
Starting to write CD/DVD at speed 8 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01:    6 of   59 MB written (fifo 100%) [buf  14%]
6.6x.cdrecord: I/O error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 0D 90 00 00 1F 00
status: 0x0 (GOOD STATUS)
resid: 63488
cmd finished after 1.350s timeout 40s

write track data: error after 7110656 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:   18.390s
Average write speed  28.1x.
Min drive buffer fill was 14%
Fixating time:   32.868s
cdrecord: fifo had 240 puts and 113 gets.
cdrecord: fifo was 0 times empty and 112 times full, min fill was 99%.
Dan O'Callaghan <ocalld at cogent-dsn.com>

More information about the users mailing list