From pfelecan at blastwave.org Wed Nov 1 17:20:30 2006 From: pfelecan at blastwave.org (Peter FELECAN) Date: Wed, 01 Nov 2006 17:20:30 +0100 Subject: [csw-users] Emacs 22 snapsot 20061101 CVS in testing Message-ID: The monthly CVS snapshot of the next version of Emacs, is in the testing area: http://www.blastwave.org/testing/emacs-22.0.90,REV=cvs20061101-SunOS5.8-i386-CSW.pkg.gz http://www.blastwave.org/testing/emacs-22.0.90,REV=cvs20061101-SunOS5.8-sparc-CSW.pkg.gz If you wish to use/test the bleeding edge Emacs, you're welcome. But, if there are issues, please report them upstream; I'll manage only the packaging side. To install this package, you need to remove all dependent packages and Emacs 21.4 itself; after that, you install, using pkgadd, the CVS Emacs corresponding to your architecture and, if you're a TeX user, the nifty AucTex package. Note that this version includes the successors of: oortgnus and emacscalc, available as Blastwave packages, and many other, previously separate, packages --- e.g., tramp. I'll made a new testing package the next month. Enjoy -- Peter From r.mahoney at iconz.co.nz Thu Nov 2 09:25:47 2006 From: r.mahoney at iconz.co.nz (Richard Mahoney) Date: Thu, 02 Nov 2006 21:25:47 +1300 Subject: [csw-users] Eclipse 3.2.1 REV-2006.10.23 | /opt/csw/bin/eclipse: ./eclipse: cannot execute Message-ID: <1162455947.21557.11.camel@proliant> Dear Subscribers, On 28 Oct I upgraded from eclipse 3.2 to 3.2.1 REV-2006.10.23 and the new package will not start. The error follows: [rbm49 at proliant:7:~] % eclipse /opt/csw/bin/eclipse: ./eclipse: cannot execute I've checked the permissions and all seems to be fine. Although I'd like to give further details a complete failure such as this leaves me at a bit of a loss. The system is as follows: [rbm49 at proliant:7:~] % uname -a SunOS proliant 5.10 Generic_118855-19 i86pc i386 i86pc I'd be grateful for any suggestions. Best regards, Richard Mahoney -- Richard MAHONEY | internet: http://indica-et-buddhica.org/ Littledene | telephone/telefax (man.): +64 3 312 1699 Bay Road | cellular: +64 27 482 9986 OXFORD, NZ | email: r.mahoney at indica-et-buddhica.org ----------------------------------------------------------- Philologica: http://indica-et-buddhica.org/philologica/ Repositorium: http://indica-et-buddhica.org/repositorium/ From mats.larsson at ericsson.com Thu Nov 2 11:04:08 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 02 Nov 2006 11:04:08 +0100 Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Message-ID: <4549C298.6020100@ericsson.com> Dear Subscribers, Today I did try to upgrade gnome_panel from whatever version to 2.14.3,REV=2006.10.20 but I ran into problems: No existing install of CSWgnomepanel found. Installing... Trying http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz --10:57:09-- http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' Resolving proxy.uab.ericsson.se... 134.138.6.114 Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. Proxy request sent, awaiting response... 200 OK Length: 3,272,511 (3.1M) [application/octet-stream] 100%[========================================================================================>] 3,272,511 9.83M/s 10:57:09 (9.81 MB/s) - `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved [3272511/3272511] Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks ^C It did uninstall the first time but then it was looping forever. Anyone else seeing this? BR MOL From maybird1776 at yahoo.com Thu Nov 2 12:43:47 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 2 Nov 2006 03:43:47 -0800 (PST) Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Message-ID: <20061102114347.30168.qmail@web33606.mail.mud.yahoo.com> Install the updated gnome packages in www.blastwave.org/testing gnome_panel 2006.10.27 ~ Ken ----- Original Message ---- From: Mats Larsson To: questions and discussions Sent: Thursday, November 2, 2006 5:04:08 AM Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Dear Subscribers, Today I did try to upgrade gnome_panel from whatever version to 2.14.3,REV=2006.10.20 but I ran into problems: No existing install of CSWgnomepanel found. Installing... Trying http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz --10:57:09-- http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' Resolving proxy.uab.ericsson.se... 134.138.6.114 Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. Proxy request sent, awaiting response... 200 OK Length: 3,272,511 (3.1M) [application/octet-stream] 100%[========================================================================================>] 3,272,511 9.83M/s 10:57:09 (9.81 MB/s) - `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved [3272511/3272511] Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks ^C It did uninstall the first time but then it was looping forever. Anyone else seeing this? BR MOL _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From ghenry at cmi.univ-mrs.fr Thu Nov 2 13:44:41 2006 From: ghenry at cmi.univ-mrs.fr (Gerard Henry) Date: Thu, 02 Nov 2006 13:44:41 +0100 Subject: [csw-users] qt4? Message-ID: <4549E839.3000905@cmi.univ-mrs.fr> hello all, i need qt4 to compile this app: http://www.xm1math.net/texmaker (Free cross-platform LaTeX editor) because i don't succeed in using kile, compile went fine, but execution do nothing. Actually, i see only qt3 in blastwave. Thanks in advance, gerard From a.cervellin at virgilio.it Thu Nov 2 14:27:09 2006 From: a.cervellin at virgilio.it (Alessio Cervellin) Date: Thu, 2 Nov 2006 14:27:09 +0100 (GMT+01:00) Subject: [csw-users] qt4? Message-ID: <10ea8da005f.a.cervellin@virgilio.it> You may wish to try (at your own "risk") the qt4 package actually in testing: http://www.blastwave.org/testing/ ----Messaggio originale---- Da: ghenry at cmi.univ-mrs.fr Data: 2-nov-2006 1.44 PM A: "questions and discussions" Ogg: [csw-users] qt4? hello all, i need qt4 to compile this app: http://www.xm1math.net/texmaker (Free cross-platform LaTeX editor) because i don't succeed in using kile, compile went fine, but execution do nothing. Actually, i see only qt3 in blastwave. Thanks in advance, gerard _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave. org/mailman/listinfo/users From mats.larsson at ericsson.com Thu Nov 2 15:10:07 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 02 Nov 2006 15:10:07 +0100 Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install In-Reply-To: <20061102114347.30168.qmail@web33606.mail.mud.yahoo.com> References: <20061102114347.30168.qmail@web33606.mail.mud.yahoo.com> Message-ID: <4549FC3F.8020207@ericsson.com> I could try that but I'm not sure what we will achieve with that. There is no problem installing the gnome_panel 2006.10.20 pkg with pkgadd if I download it first as you do with pkgs from testing. It's only with pkg-get -i (or -u) I get the problem described below. /MOL On 2006-11-02 12:43, ken mays wrote: > Install the updated gnome packages in www.blastwave.org/testing > gnome_panel 2006.10.27 > ~ Ken > ----- Original Message ---- > From: Mats Larsson > To: questions and discussions > Sent: Thursday, November 2, 2006 5:04:08 AM > Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > Dear Subscribers, > Today I did try to upgrade gnome_panel from whatever version to > 2.14.3,REV=2006.10.20 but I ran into problems: > No existing install of CSWgnomepanel found. Installing... > Trying > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > --10:57:09-- > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' > Resolving proxy.uab.ericsson.se... 134.138.6.114 > Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. > Proxy request sent, awaiting response... 200 OK > Length: 3,272,511 (3.1M) [application/octet-stream] > 100%[========================================================================================>] > 3,272,511 9.83M/s > 10:57:09 (9.81 MB/s) - > `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved > [3272511/3272511] > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > ^C > It did uninstall the first time but then it was looping forever. Anyone > else seeing this? > BR MOL > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users From ghenry at cmi.univ-mrs.fr Thu Nov 2 15:25:36 2006 From: ghenry at cmi.univ-mrs.fr (Gerard Henry) Date: Thu, 02 Nov 2006 15:25:36 +0100 Subject: [csw-users] qt4? In-Reply-To: <10ea8da005f.a.cervellin@virgilio.it> References: <10ea8da005f.a.cervellin@virgilio.it> Message-ID: <4549FFE0.1080208@cmi.univ-mrs.fr> Alessio Cervellin wrote: > You may wish to try (at your own "risk") the qt4 package actually in > testing: > http://www.blastwave.org/testing/ > it doesn't work: 4.2.0 mombasa-gerard% qmake -unix PREFIX=/usr/local/texmaker-1.4 texmaker.pro Project LOAD(): Feature qt_config cannot be found. and according to this message: http://lists.trolltech.com/qt4-preview-feedback/2005-06/thread00123-0.html not simple to fix here gerard From maybird1776 at yahoo.com Thu Nov 2 16:27:07 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 2 Nov 2006 07:27:07 -0800 (PST) Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Message-ID: <20061102152707.4048.qmail@web33607.mail.mud.yahoo.com> Yes. It is a package dependency issue which was fixed in the newer package. We could patch pkg-get to not to try to install a package that is already installed [with same version numbering]. ~Ken ----- Original Message ---- From: Mats Larsson To: questions and discussions Sent: Thursday, November 2, 2006 9:10:07 AM Subject: Re: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install I could try that but I'm not sure what we will achieve with that. There is no problem installing the gnome_panel 2006.10.20 pkg with pkgadd if I download it first as you do with pkgs from testing. It's only with pkg-get -i (or -u) I get the problem described below. /MOL On 2006-11-02 12:43, ken mays wrote: > Install the updated gnome packages in www.blastwave.org/testing > gnome_panel 2006.10.27 > ~ Ken > ----- Original Message ---- > From: Mats Larsson > To: questions and discussions > Sent: Thursday, November 2, 2006 5:04:08 AM > Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > Dear Subscribers, > Today I did try to upgrade gnome_panel from whatever version to > 2.14.3,REV=2006.10.20 but I ran into problems: > No existing install of CSWgnomepanel found. Installing... > Trying > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > --10:57:09-- > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' > Resolving proxy.uab.ericsson.se... 134.138.6.114 > Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. > Proxy request sent, awaiting response... 200 OK > Length: 3,272,511 (3.1M) [application/octet-stream] > 100%[========================================================================================>] > 3,272,511 9.83M/s > 10:57:09 (9.81 MB/s) - > `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved > [3272511/3272511] > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > ^C > It did uninstall the first time but then it was looping forever. Anyone > else seeing this? > BR MOL > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From maybird1776 at yahoo.com Thu Nov 2 16:30:48 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 2 Nov 2006 07:30:48 -0800 (PST) Subject: [csw-users] qt4? Message-ID: <20061102153048.32672.qmail@web33615.mail.mud.yahoo.com> Make sure you look in the right directory for the pkgconfig files. The package builds all Qt4 tutorials and examples so it'll work for you. ~Ken ----- Original Message ---- From: Gerard Henry To: questions and discussions Sent: Thursday, November 2, 2006 9:25:36 AM Subject: Re: [csw-users] qt4? Alessio Cervellin wrote: > You may wish to try (at your own "risk") the qt4 package actually in > testing: > http://www.blastwave.org/testing/ > it doesn't work: 4.2.0 mombasa-gerard% qmake -unix PREFIX=/usr/local/texmaker-1.4 texmaker.pro Project LOAD(): Feature qt_config cannot be found. and according to this message: http://lists.trolltech.com/qt4-preview-feedback/2005-06/thread00123-0.html not simple to fix here gerard _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From mats.larsson at ericsson.com Fri Nov 3 12:25:13 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Fri, 03 Nov 2006 12:25:13 +0100 Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install In-Reply-To: <20061102152707.4048.qmail@web33607.mail.mud.yahoo.com> References: <20061102152707.4048.qmail@web33607.mail.mud.yahoo.com> Message-ID: <454B2719.6000707@ericsson.com> Then I suggest moving the gnome_panel 2006.10.27 from testing to unstable as soon as it can be done. BR MOL n 2006-11-02 16:27, ken mays wrote: > Yes. It is a package dependency issue which was fixed in the newer package. We could patch pkg-get to not to try to install a package that is already installed [with same version numbering]. > > ~Ken > > > ----- Original Message ---- > From: Mats Larsson > To: questions and discussions > Sent: Thursday, November 2, 2006 9:10:07 AM > Subject: Re: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > > > I could try that but I'm not sure what we will achieve with that. There > is no problem installing the gnome_panel 2006.10.20 pkg with pkgadd if I > download it first as you do with pkgs from testing. It's only with > pkg-get -i (or -u) I get the problem described below. > > /MOL > > On 2006-11-02 12:43, ken mays wrote: >> Install the updated gnome packages in www.blastwave.org/testing >> gnome_panel 2006.10.27 > >> ~ Ken > > >> ----- Original Message ---- >> From: Mats Larsson >> To: questions and discussions >> Sent: Thursday, November 2, 2006 5:04:08 AM >> Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > >> Dear Subscribers, > >> Today I did try to upgrade gnome_panel from whatever version to >> 2.14.3,REV=2006.10.20 but I ran into problems: > >> No existing install of CSWgnomepanel found. Installing... >> Trying >> http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz >> --10:57:09-- >> http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz >> => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' >> Resolving proxy.uab.ericsson.se... 134.138.6.114 >> Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. >> Proxy request sent, awaiting response... 200 OK >> Length: 3,272,511 (3.1M) [application/octet-stream] > >> 100%[========================================================================================>] >> 3,272,511 9.83M/s > >> 10:57:09 (9.81 MB/s) - >> `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved >> [3272511/3272511] > >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> Trying to install dependancy gnome_panel >> No existing install of CSWgnomepanel found. Installing... >> Pre-existing local file >> gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum >> Keeping existing file >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> Trying to install dependancy gnome_panel >> No existing install of CSWgnomepanel found. Installing... >> Pre-existing local file >> gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum >> Keeping existing file >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> Trying to install dependancy gnome_panel >> No existing install of CSWgnomepanel found. Installing... >> Pre-existing local file >> gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum >> Keeping existing file >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> ^C > >> It did uninstall the first time but then it was looping forever. Anyone >> else seeing this? > >> BR MOL > > > >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users > > > > > >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users From coolvibe at hackerheaven.org Mon Nov 6 15:14:46 2006 From: coolvibe at hackerheaven.org (Emiel Kollof) Date: Mon, 6 Nov 2006 15:14:46 +0100 Subject: [csw-users] Blastwave KDE and antialiased fonts Message-ID: <200611061514.52272.coolvibe@hackerheaven.org> Hi list, This might be a FAQ, but I'd like to see this cleared up anyway. Why are the kdelibs not compiled with antialiased fonts (freetype) support? I can't really find a conclusive answer about that with Google, so I'm asking here. Is there any way I can recompile the kdelibs package myself and have it replace the blastwave package? Have you made any patches to kdelibs to get it to compile cleanly? If yes, where are they? I could make a anti-aliasing-supporting version of kdelibs and distribute it if you don't have the time or will to do it. Oh, any chance of seeing KDE 3.5.x some time on blastwave? Cheers, Emiel -- "It was a virgin forest, a place where the Hand of Man had never set foot." -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 191 bytes Desc: not available Url : http://lists.blastwave.org/pipermail/users/attachments/20061106/21190a50/attachment.bin From dclarke at blastwave.org Mon Nov 6 15:27:32 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 6 Nov 2006 09:27:32 -0500 (EST) Subject: [csw-users] Blastwave KDE and antialiased fonts In-Reply-To: <200611061514.52272.coolvibe@hackerheaven.org> References: <200611061514.52272.coolvibe@hackerheaven.org> Message-ID: <36719.24.146.17.108.1162823252.squirrel@mail.blastwave.org> > Hi list, > > This might be a FAQ, but I'd like to see this cleared up anyway. Why are the > kdelibs not compiled with antialiased fonts (freetype) support? I think that there actually is a good reason. It may not be a permanent one but its a good one. I will await the arrival of Ken Mays to address that issue. > I can't really find a conclusive answer about that with Google, so > I'm asking here. Sometimes google brings up advertisements faster than answers. I know that is a useless answer also. Sorry .. its early here. Let me break the rest of your post into digestable chunks : > Is there any way I can recompile the kdelibs package myself and have it > replace the blastwave package? Let's call that Question 1. > Have you made any patches to kdelibs to get it to compile cleanly? That will be Question 2. > If yes, where are they? That can be Question 2.1 which is a sub-section of (2) above. > I could make a anti-aliasing-supporting version of kdelibs and > distribute it if you don't have the time or will to do it. That will be Statement 1. > Oh, any chance of seeing KDE 3.5.x some time on blastwave? Finally we have Question 3. Question 3 should be addressed first. KDE 3.5.5 just shipped recently. Well, last month. By internet speed measurements it may as well be last year. http://www.kde.org/announcements/announce-3.5.5.php I think we discussed this and are looking at a big leap in KDE at some point in the near future. See http://www.kde.org/info/3.80.2.php Re : Statement (1) If you want to participate then great! Join up via the sign up page and then let's see if we can get your packages built, tested, integrated into KDE and released. http://www.blastwave.org/maintainer-signup.php The other questions will await the arrival of Ken Mays. He is Mr. KDE around here and after the last few months he is Mr. GNOME also. Let me look into a few of those questions and get back to you. Dennis From realmcking at gmail.com Mon Nov 6 15:54:10 2006 From: realmcking at gmail.com (Mark McCoy) Date: Mon, 6 Nov 2006 08:54:10 -0600 Subject: [csw-users] Blastwave KDE and antialiased fonts In-Reply-To: <36719.24.146.17.108.1162823252.squirrel@mail.blastwave.org> References: <200611061514.52272.coolvibe@hackerheaven.org> <36719.24.146.17.108.1162823252.squirrel@mail.blastwave.org> Message-ID: On 11/6/06, Dennis Clarke wrote: > > > Hi list, > > > > This might be a FAQ, but I'd like to see this cleared up anyway. Why are the > > kdelibs not compiled with antialiased fonts (freetype) support? > > I think that there actually is a good reason. It may not be a permanent one > but its a good one. I will await the arrival of Ken Mays to address that > issue. > > > I can't really find a conclusive answer about that with Google, so > > I'm asking here. > > Sometimes google brings up advertisements faster than answers. > > I know that is a useless answer also. > > Sorry .. its early here. > > Let me break the rest of your post into digestable chunks : > > > Is there any way I can recompile the kdelibs package myself and have it > > replace the blastwave package? > > Let's call that Question 1. > > > Have you made any patches to kdelibs to get it to compile cleanly? > > That will be Question 2. > > > If yes, where are they? > > That can be Question 2.1 which is a sub-section of (2) above. > > > I could make a anti-aliasing-supporting version of kdelibs and > > distribute it if you don't have the time or will to do it. > > That will be Statement 1. > > > Oh, any chance of seeing KDE 3.5.x some time on blastwave? > > Finally we have Question 3. > > Question 3 should be addressed first. > > KDE 3.5.5 just shipped recently. Well, last month. By internet speed > measurements it may as well be last year. > > http://www.kde.org/announcements/announce-3.5.5.php > > I think we discussed this and are looking at a big leap in KDE at some > point in the near future. See http://www.kde.org/info/3.80.2.php > > Re : Statement (1) > > If you want to participate then great! > > Join up via the sign up page and then let's see if we can get your > packages built, tested, integrated into KDE and released. > > http://www.blastwave.org/maintainer-signup.php > > The other questions will await the arrival of Ken Mays. He is Mr. KDE > around here and after the last few months he is Mr. GNOME also. > > Let me look into a few of those questions and get back to you. > > Dennis > > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > Since blastwave is now using the GAR ports system to manage building their packages, and KDE's Konstruct utility is based on GAR, could Konstruct be somehow merged into blastwave's GAR tree to build the KDE packages? I tried building KDE from Konstruct last week, and ran into some errors that I didn't know how to solve right away, so it went back on the shelf until I can get a few moments to look at it again. If we could get someone who is more knowledgable about GAR to get the ball rolling, I would be happy to help test. -- Mark McCoy -- Professional Unix geek Here in America we are descended in blood and in spirit from revolutionists and rebels - men and women who dared to dissent from accepted doctrine. As their heirs, may we never confuse honest dissent with disloyal subversion. -- Dwight D. Eisenhower From maybird1776 at yahoo.com Mon Nov 6 16:30:31 2006 From: maybird1776 at yahoo.com (ken mays) Date: Mon, 6 Nov 2006 07:30:31 -0800 (PST) Subject: [csw-users] Blastwave KDE and antialiased fonts Message-ID: <20061106153032.88670.qmail@web33610.mail.mud.yahoo.com> As they said in the Matrix trilogies, there is no spoon.... (aka KDE 3.5.5 for Blastwave). Seriously, focus your sites on KDE 4.0. We have Qt 4.2.0 ready and will spin off KDE 4.0 when it is officially released. If you want to help in this venture, work on building and testing KDE 4.0 (i.e. currently 3.80.2) for Solaris. Provide feedback of your issues and concerns. Ref: http://www.kde.org/info/3.80.2.php Cory Omand already has the KDE components in place for the build system and I just have to have him update this for KDE 4.0. As for the antialiased fonts, I have freetype 2.2.1 available in /testing so just build KDElibs against that and maybe Qt. Turn on the options in the display and font control panels. ~ Ken ----- Original Message ---- From: Mark McCoy To: questions and discussions Sent: Monday, November 6, 2006 9:54:10 AM Subject: Re: [csw-users] Blastwave KDE and antialiased fonts On 11/6/06, Dennis Clarke wrote: > > > Hi list, > > > > This might be a FAQ, but I'd like to see this cleared up anyway. Why are the > > kdelibs not compiled with antialiased fonts (freetype) support? > > I think that there actually is a good reason. It may not be a permanent one > but its a good one. I will await the arrival of Ken Mays to address that > issue. > > > I can't really find a conclusive answer about that with Google, so > > I'm asking here. > > Sometimes google brings up advertisements faster than answers. > > I know that is a useless answer also. > > Sorry .. its early here. > > Let me break the rest of your post into digestable chunks : > > > Is there any way I can recompile the kdelibs package myself and have it > > replace the blastwave package? > > Let's call that Question 1. > > > Have you made any patches to kdelibs to get it to compile cleanly? > > That will be Question 2. > > > If yes, where are they? > > That can be Question 2.1 which is a sub-section of (2) above. > > > I could make a anti-aliasing-supporting version of kdelibs and > > distribute it if you don't have the time or will to do it. > > That will be Statement 1. > > > Oh, any chance of seeing KDE 3.5.x some time on blastwave? > > Finally we have Question 3. > > Question 3 should be addressed first. > > KDE 3.5.5 just shipped recently. Well, last month. By internet speed > measurements it may as well be last year. > > http://www.kde.org/announcements/announce-3.5.5.php > > I think we discussed this and are looking at a big leap in KDE at some > point in the near future. See http://www.kde.org/info/3.80.2.php > > Re : Statement (1) > > If you want to participate then great! > > Join up via the sign up page and then let's see if we can get your > packages built, tested, integrated into KDE and released. > > http://www.blastwave.org/maintainer-signup.php > > The other questions will await the arrival of Ken Mays. He is Mr. KDE > around here and after the last few months he is Mr. GNOME also. > > Let me look into a few of those questions and get back to you. > > Dennis > > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > Since blastwave is now using the GAR ports system to manage building their packages, and KDE's Konstruct utility is based on GAR, could Konstruct be somehow merged into blastwave's GAR tree to build the KDE packages? I tried building KDE from Konstruct last week, and ran into some errors that I didn't know how to solve right away, so it went back on the shelf until I can get a few moments to look at it again. If we could get someone who is more knowledgable about GAR to get the ball rolling, I would be happy to help test. -- Mark McCoy -- Professional Unix geek Here in America we are descended in blood and in spirit from revolutionists and rebels - men and women who dared to dissent from accepted doctrine. As their heirs, may we never confuse honest dissent with disloyal subversion. -- Dwight D. Eisenhower _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From obi at unixkiste.org Mon Nov 6 17:24:34 2006 From: obi at unixkiste.org (Stefan Held) Date: Mon, 6 Nov 2006 17:24:34 +0100 Subject: [csw-users] cyrus imapd Message-ID: Hi Guys. First of all. Big thx to the Community here. Second. This is the third attempt to contribute something to blastwave. What does one need to do if he wants to become a maintainer of a wanted package? Seems like filling in the required Fields on the webpage is not good enough? If someone is willing to point me to the right direction i would be very thankfull. Second: Today i updated my cyrus imapd Server to the recent stable version. I experienced some difficulties during the update procedure. ( I would love to file a mantis entry. But i am still waiting for the EMail :) Installing cyrus_imapd - Pop and Imap server from the Cyrus mail system as ## Executing preinstall script. /var/sadm/pkg/CSWcyrusimapd/install/preinstall: /usr/bin/getent: not found Creating cyrus user... UX: /usr/sbin/useradd: ERROR: cyrus is already in use. Choose another. pkgadd: ERROR: preinstall script did not complete successfully Then, if you try to solve this problem with removing the cyrus user and pkgrm the package you ran into the next problem. The preinstall script is not forcing a unique uid for the cyrus user and therefore / opt/csw/var/cyrus/mail is not accessible. -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 2147 bytes Desc: not available Url : http://lists.blastwave.org/pipermail/users/attachments/20061106/1f39b823/attachment.bin From william at wbonnet.net Tue Nov 7 16:04:59 2006 From: william at wbonnet.net (William Bonnet) Date: Tue, 7 Nov 2006 16:04:59 +0100 Subject: [csw-users] Eclipse 3.2.1 REV-2006.10.23 | /opt/csw/bin/eclipse: ./eclipse: cannot execute In-Reply-To: <1162455947.21557.11.camel@proliant> References: <1162455947.21557.11.camel@proliant> Message-ID: <9A8357E5-9E65-4571-994D-0F2AA88246E0@wbonnet.net> Hi all > I've checked the permissions and all seems to be fine. Although I'd > like to give further details a complete failure such as this leaves me > at a bit of a loss. The system is as follows: > > [rbm49 at proliant:7:~] % uname -a > SunOS proliant 5.10 Generic_118855-19 i86pc i386 i86pc > > > I'd be grateful for any suggestions. > I have found the origin of the problem. I made on error while build the x86 package. SPARC package is not concerned by this problem. I have started to work on a new build fixing this issue. I'll let you know as soon as a new package will be ready. Kind regards, William From amit.uttam at gmail.com Wed Nov 8 04:44:07 2006 From: amit.uttam at gmail.com (Amit) Date: Tue, 7 Nov 2006 19:44:07 -0800 Subject: [csw-users] netsnmp install issues Message-ID: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> Hey guys, First of all thanks for the all the work put in to blastwave! As a first time user of Solaris, blastwave has been a wonderful tool to work with. So far not too many issues where I haven't figured out by searching the mailing lists or Google. This one has got me tied in a knot. I did the following: 1) pkg-get -i netsnmp 2) I get the following error: bash-3.1$ sudo pkg-get -i netsnmp Password: No existing install of CSWnetsnmp found. Installing... Pre-existing local file netsnmp-5.3.0.1,REV=2006.04.08-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... ERROR: no info for SUNWpiclu. Cannot install dependancy. ERROR: could not install required dependancies for CSWnetsnmp bash-3.1$ 3) Now, I go ahead and search for the package SUNWpiclu in my 'Solaris 8 06/00' software CDs but could not find the package in any of the directories. (By the way I also tried the pkgadd -d /cdrom/.../Product method but could find the listing). Any suggestions or help would be greatly appreciated. Thanks, Amit From comand at blastwave.org Wed Nov 8 08:48:09 2006 From: comand at blastwave.org (Cory Omand) Date: Tue, 7 Nov 2006 23:48:09 -0800 Subject: [csw-users] netsnmp install issues In-Reply-To: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> Message-ID: On 11/7/06, Amit wrote: [snip] > ERROR: no info for SUNWpiclu. Cannot install dependancy. > ERROR: could not install required dependancies for CSWnetsnmp [snip] > > Any suggestions or help would be greatly appreciated. > This package comes in a patch (and in more recent releases of S8) -- you might want to ensure your system is fully patched up, or install a more recent release of S8. The package should probably be checking for the relevant patch and reporting whether or not you have it -- you could raise a bug on the package to suggest this to the maintainer. HTH, Cory. From james at blastwave.org Wed Nov 8 10:31:47 2006 From: james at blastwave.org (James Lee) Date: Wed, 08 Nov 2006 09:31:47 GMT Subject: [csw-users] netsnmp install issues In-Reply-To: References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> Message-ID: <20061108.9314700.1726629784@gyor.asd.demon.co.uk> On 08/11/06, 07:48:09, Cory Omand wrote regarding Re: [csw-users] netsnmp install issues: > On 11/7/06, Amit wrote: > [snip] > > ERROR: no info for SUNWpiclu. Cannot install dependancy. > > ERROR: could not install required dependancies for CSWnetsnmp > [snip] > > > > Any suggestions or help would be greatly appreciated. > > > This package comes in a patch Please will someone tell us which? James. From oldwenstyle at yahoo.com Wed Nov 8 16:22:10 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Wed, 8 Nov 2006 07:22:10 -0800 (PST) Subject: [csw-users] pkg-get help Message-ID: <20061108152210.22229.qmail@web56609.mail.re3.yahoo.com> Hello all, I have followed the instructions on the blastwave website, but I am still having trouble getting this to work. Can someone help me. The following are the known variables. -- SunOS 5.8 -- Server does not have DNS. I can ping any IP, but I can not resolve names (www.google.com) -- I have tried url=http://128.210.3.14/mirrors/blastwave.org/unstable/ ********pkg-get.conf********************** # Configuration file for "pkg-get" # man pkg-get for details on the program # This config file has been pre-customized for use with CSW packages. # The latest set of CSW mirrors is always available at # http://www.blastwave.org/mirrors.html # default site, in USA: url=http://ftp.math.purdue.edu/mirrors/blastwave.org/unstable/ # secondary US mirror #url=http://csw.ch.bme.hu/unstable/ # Denmark mirror. FTP preferred. #url=ftp://mirrors.sunsite.dk/mirrors/csw/unstable #url=http://mirrors.sunsite.dk/csw/unstable # If you are behind a firewall, set one of these as appropriate #ftp_proxy=http://your-proxy:8023 #http_proxy=http://your-proxy:8023 #export http_proxy ftp_proxy # You may also set PROXYFLAGS in your environment to set flags "/opt/csw/etc/pkg-get.conf" 43 lines, 1449 characters ******************************************* **** test ************* #: / -> which wget /tmp/wget/wget #: / -> which pkg-get /opt/csw/bin/pkg-get #: / -> *********************** *** run attempt *************************** #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have checksums compared, you must install one of: md5 or gmd5sum (gmd5sum is available with GNU textutils) try 'pkg-get install textutils' WARNING: no catalog file for site ftp.math.purdue.edu Updating catalog file first Getting catalog... /opt/csw/bin/pkg-get: wget: cannot execute ERROR: could not get catalog file #: / -> ******************************************* Thank you for your help...... Oldwen --------------------------------- Access over 1 million songs - Yahoo! Music Unlimited. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061108/5bc789be/attachment.html From dclarke at blastwave.org Wed Nov 8 16:31:31 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Wed, 8 Nov 2006 10:31:31 -0500 (EST) Subject: [csw-users] netsnmp install issues In-Reply-To: <20061108.9314700.1726629784@gyor.asd.demon.co.uk> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> <20061108.9314700.1726629784@gyor.asd.demon.co.uk> Message-ID: <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> > On 08/11/06, 07:48:09, Cory Omand wrote regarding > Re: [csw-users] netsnmp install issues: > >> On 11/7/06, Amit wrote: >> [snip] >> > ERROR: no info for SUNWpiclu. Cannot install dependancy. >> > ERROR: could not install required dependancies for CSWnetsnmp >> [snip] >> > >> > Any suggestions or help would be greatly appreciated. >> > > >> This package comes in a patch > > Please will someone tell us which? > Sunsolve is our friend ... let me do a search. dclarke From james at blastwave.org Wed Nov 8 17:03:59 2006 From: james at blastwave.org (James Lee) Date: Wed, 08 Nov 2006 16:03:59 GMT Subject: [csw-users] pkg-get help In-Reply-To: <20061108152210.22229.qmail@web56609.mail.re3.yahoo.com> References: <20061108152210.22229.qmail@web56609.mail.re3.yahoo.com> Message-ID: <20061108.16035900.305452540@gyor.asd.demon.co.uk> On 08/11/06, 15:22:10, Oldwen Adriano wrote regarding [csw-users] pkg-get help: > -- SunOS 5.8 > -- Server does not have DNS. I can ping any IP, but I can not resolve names (www.google.com) > -- I have tried url=http://128.210.3.14/mirrors/blastwave.org/unstable/ $ curl -I http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog HTTP/1.1 404 Not Found Date: Wed, 08 Nov 2006 15:56:42 GMT Server: Apache Content-Type: text/html So that is not going to work. The reason is because the server uses the host name to decide what to do. How to set the host header? First test again with curl: $ curl -I -H "Host:ftp.math.purdue.edu" http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog HTTP/1.1 200 OK Date: Wed, 08 Nov 2006 15:56:51 GMT Server: Apache Last-Modified: Fri, 03 Nov 2006 20:54:38 GMT ETag: "c85c-2e874-454bac8e" Accept-Ranges: bytes Content-Length: 190580 Content-Type: text/plain Good, now with wget: $ wget --header="Host:ftp.math.purdue.edu" http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog -O /dev/null --15:57:43-- http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog => `/dev/null' Connecting to 128.210.3.14:80... connected. HTTP request sent, awaiting response... 200 OK Length: 190,580 (186K) [text/plain] 100%[=================================================================== =============>] 190,580 103.00K/s 15:57:45 (102.93 KB/s) - `/dev/null' saved [190580/190580] you get make pkg-get use this by setting WGET: $ WGET="wget --header=Host:ftp.math.purdue.edu" $ export WGET $ $WGET http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog -O /dev/null --16:00:45-- http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog => `/dev/null' Connecting to 128.210.3.14:80... connected. HTTP request sent, awaiting response... 200 OK Length: 190,580 (186K) [text/plain] 100%[=================================================================== =============>] 190,580 104.68K/s 15:58:32 (104.36 KB/s) - `/dev/null' saved [190580/190580] Or it would be better specifically in the url setting (untested by me, please try it): url="--header=Host:ftp.math.purdue.edu http://128.210.3.14/mirrors/blastwave.org/unstable/" From oldwenstyle at yahoo.com Wed Nov 8 18:48:52 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Wed, 8 Nov 2006 09:48:52 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <4551FB4C.7000603@Sun.COM> Message-ID: <20061108174852.81808.qmail@web56601.mail.re3.yahoo.com> These are my results from your suggestion. Any other ideas?? Thank you... #: / -> nslookup nixcraft.in Server: dns.vsnl.net.in Address: 202.54.1.30 *** dns.vsnl.net.in can't find nixcraft.in: Query refused #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have checksums compared, you must install one of: md5 or gmd5sum (gmd5sum is available with GNU textutils) try 'pkg-get install textutils' WARNING: no catalog file for site ftp.math.purdue.edu Updating catalog file first Getting catalog... /opt/csw/bin/pkg-get: wget: cannot execute ERROR: could not get catalog file #: / -> Armand Heijster - Sun EMEA wrote: 1) Create the file called /etc/resolv.conf - which includes the primary and secondary DNS server IP address for Solaris system, it can be your own DNS server or your ISPs DNS server: # touch /etc/resolv.conf Open /etc/resolv.conf using vi text editor: # vi /etc/resolv.conf Add following lines to it: search nixcraft.in nameserver 202.54.1.30 nameserver 202.54.1.18 Where, nameserver IP : It is IP of first DNS server search nixcraft.in : Default domain name to search. For example, if you type command nslookup www, it will search it as www.nixcraft.in 2) Enable the name resolving using DNS as follows: # cp /etc/nsswitch.dns /etc/nsswitch.conf 3) Test it by running the nslookup command as follows: # nslookup nixcraft.in OR # /usr/sfw/sbin/nslookup nixcraft.in Output: Server: gwbsd2vsnl.nixcraft.in Address: 192.168.1.202 Non-authoritative answer: Name: nixcraft.in Address: 202.71.128.225 Oldwen Adriano wrote: Hello all, I have followed the instructions on the blastwave website, but I am still having trouble getting this to work. Can someone help me. The following are the known variables. -- SunOS 5.8 -- Server does not have DNS. I can ping any IP, but I can not resolve names (www.google.com) -- I have tried url=http://128.210.3.14/mirrors/blastwave.org/unstable/ ********pkg-get.conf********************** # Configuration file for "pkg-get" # man pkg-get for details on the program # This config file has been pre-customized for use with CSW packages. # The latest set of CSW mirrors is always available at # http://www.blastwave.org/mirrors.html # default site, in USA: url=http://ftp.math.purdue.edu/mirrors/blastwave.org/unstable/ # secondary US mirror #url=http://csw.ch.bme.hu/unstable/ # Denmark mirror. FTP preferred. #url=ftp://mirrors.sunsite.dk/mirrors/csw/unstable #url=http://mirrors.sunsite.dk/csw/unstable # If you are behind a firewall, set one of these as appropriate #ftp_proxy=http://your-proxy:8023 #http_proxy=http://your-proxy:8023 #export http_proxy ftp_proxy # You may also set PROXYFLAGS in your environment to set flags "/opt/csw/etc/pkg-get.conf" 43 lines, 1449 characters ******************************************* **** test ************* #: / -> which wget /tmp/wget/wget #: / -> which pkg-get /opt/csw/bin/pkg-get #: / -> *********************** *** run attempt *************************** #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have checksums compared, you must install one of: md5 or gmd5sum (gmd5sum is available with GNU textutils) try 'pkg-get install textutils' WARNING: no catalog file for site ftp.math.purdue.edu Updating catalog file first Getting catalog... /opt/csw/bin/pkg-get: wget: cannot execute ERROR: could not get catalog file #: / -> ******************************************* Thank you for your help...... Oldwen --------------------------------- Access over 1 million songs - Yahoo! Music Unlimited. --------------------------------- _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users -- Armand Heijster TSC emea x64 - SC MC Sun Microsystems, Inc. ES Phone +31 20 517 47 74 Email Armand.Heijster at Sun.COM --------------------------------- Check out the all-new Yahoo! Mail - Fire up a more powerful email and get things done faster. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061108/29928f9f/attachment.html From james at blastwave.org Wed Nov 8 19:02:17 2006 From: james at blastwave.org (James Lee) Date: Wed, 08 Nov 2006 18:02:17 GMT Subject: [csw-users] pkg-get help In-Reply-To: <20061108174852.81808.qmail@web56601.mail.re3.yahoo.com> References: <20061108174852.81808.qmail@web56601.mail.re3.yahoo.com> Message-ID: <20061108.18021700.889439035@gyor.asd.demon.co.uk> On 08/11/06, 17:48:52, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > #: / -> pkg-get -i wget > WARNING: gpg not found > NOTE: To have checksums compared, you must install one of: > md5 or gmd5sum (gmd5sum is available with GNU textutils) > try 'pkg-get install textutils' > WARNING: no catalog file for site ftp.math.purdue.edu > Updating catalog file first > Getting catalog... > /opt/csw/bin/pkg-get: wget: cannot execute This is another problem, I thought we'd do the top one first. I think you need: $ chmod +x /tmp/wget/wget From oldwenstyle at yahoo.com Wed Nov 8 20:58:21 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Wed, 8 Nov 2006 11:58:21 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <20061108.18021700.889439035@gyor.asd.demon.co.uk> Message-ID: <20061108195821.94045.qmail@web56606.mail.re3.yahoo.com> Thank you for your reply, but this did not fix my problem. I still receive the same error when trying to execute pkg-get. Any other suggestions or ideas?? James Lee wrote: On 08/11/06, 17:48:52, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > #: / -> pkg-get -i wget > WARNING: gpg not found > NOTE: To have checksums compared, you must install one of: > md5 or gmd5sum (gmd5sum is available with GNU textutils) > try 'pkg-get install textutils' > WARNING: no catalog file for site ftp.math.purdue.edu > Updating catalog file first > Getting catalog... > /opt/csw/bin/pkg-get: wget: cannot execute This is another problem, I thought we'd do the top one first. I think you need: $ chmod +x /tmp/wget/wget _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Sponsored Link Degrees online in as fast as 1 Yr - MBA, Bachelor's, Master's, Associate - Click now to apply -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061108/38604dba/attachment.html From amit.uttam at gmail.com Wed Nov 8 21:18:55 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 8 Nov 2006 12:18:55 -0800 Subject: [csw-users] netsnmp install issues In-Reply-To: <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> <20061108.9314700.1726629784@gyor.asd.demon.co.uk> <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> Message-ID: <90ee5fbb0611081218t53ff840auda6f1f3a1c2476c@mail.gmail.com> Here's what I dug up: # PICL: Platform Information and Control Library # PICL daemon stores and retrieves platform-specific device data. SUNWpiclr PICL framework [r] SUNWpiclh PICL header files SUNWpiclu PICL libraries and plugins SUNWpiclx PICL libraries (64-bit) The above information was obtained from http://people.arsc.edu/~clark/sun/PkgAnalyze.html an invaluable resource for Solaris 8 users. Seems like it is regularly updated as well, las update last update: 2006-04-24! On 11/8/06, Dennis Clarke wrote: > > > On 08/11/06, 07:48:09, Cory Omand wrote regarding > > Re: [csw-users] netsnmp install issues: > > > >> On 11/7/06, Amit wrote: > >> [snip] > >> > ERROR: no info for SUNWpiclu. Cannot install dependancy. > >> > ERROR: could not install required dependancies for CSWnetsnmp > >> [snip] > >> > > >> > Any suggestions or help would be greatly appreciated. > >> > > > > >> This package comes in a patch > > > > Please will someone tell us which? > > > > Sunsolve is our friend ... let me do a search. > > dclarke > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From amit.uttam at gmail.com Thu Nov 9 03:22:30 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 8 Nov 2006 18:22:30 -0800 Subject: [csw-users] Firefox 1.5.0.7 bugs Message-ID: <90ee5fbb0611081822k6c0b22b2l8f3d2f093adde932@mail.gmail.com> Hey guys, I noticed a few odd bugs in Firefox 1.5.0.7 for Sparc. To reproduce: 1) In Bugzilla 2.22, perform a random search. 2) In the search page, click on the 'Change Columns' link. 3) Modify a few settings and save the changes by clicking 'Change Columns'. 4) Firefox then exits without prompt. Additional Info: bash-3.1$ uname -a SunOS sun1 5.8 Generic_117350-41 sun4u sparc SUNW,Ultra-5_10 bash-3.1$ Do any of you guys have this problem. I was not sure if should post this in the Firefox bugzilla page so I though to check if anyone was experiencing similar issues. Thanks, Amit From amit.uttam at gmail.com Thu Nov 9 03:29:36 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 8 Nov 2006 18:29:36 -0800 Subject: [csw-users] Firefox 1.5.0.7 bugs Message-ID: <90ee5fbb0611081829t792b8894gbdd65b9b9c0e3966@mail.gmail.com> Hmm... Did some testing with the latest bugzilla CVS found at http://landfill.bugzilla.org/bugzilla-tip/ and everything seems to work fine. Interesting.... From dclarke at blastwave.org Thu Nov 9 03:39:23 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Wed, 8 Nov 2006 21:39:23 -0500 (EST) Subject: [csw-users] Firefox 1.5.0.7 bugs In-Reply-To: <90ee5fbb0611081829t792b8894gbdd65b9b9c0e3966@mail.gmail.com> References: <90ee5fbb0611081829t792b8894gbdd65b9b9c0e3966@mail.gmail.com> Message-ID: <47310.24.146.17.108.1163039963.squirrel@mail.blastwave.org> > Hmm... > > Did some testing with the latest bugzilla CVS found at > http://landfill.bugzilla.org/bugzilla-tip/ and everything seems to > work fine. > > Interesting.... Its somewhat tough to repeat. I tried the exact same thing here with a Sparc server and .. no problem. it was a transient .. dunno really. Dennis From james at blastwave.org Thu Nov 9 10:31:35 2006 From: james at blastwave.org (James Lee) Date: Thu, 09 Nov 2006 09:31:35 GMT Subject: [csw-users] netsnmp install issues In-Reply-To: <90ee5fbb0611081218t53ff840auda6f1f3a1c2476c@mail.gmail.com> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> <20061108.9314700.1726629784@gyor.asd.demon.co.uk> <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> <90ee5fbb0611081218t53ff840auda6f1f3a1c2476c@mail.gmail.com> Message-ID: <20061109.9313500.3120927764@gyor.asd.demon.co.uk> On 08/11/06, 20:18:55, Amit wrote regarding Re: [csw-users] netsnmp install issues: > Here's what I dug up: > # PICL: Platform Information and Control Library > # PICL daemon stores and retrieves platform-specific device data. > SUNWpiclr PICL framework [r] > SUNWpiclh PICL header files > SUNWpiclu PICL libraries and plugins > SUNWpiclx PICL libraries (64-bit) Those are packages, not patches. > On 11/8/06, Dennis Clarke wrote: > > > > > On 08/11/06, 07:48:09, Cory Omand wrote regarding > > > Re: [csw-users] netsnmp install issues: > > > > > >> On 11/7/06, Amit wrote: > > >> [snip] > > >> > ERROR: no info for SUNWpiclu. Cannot install dependancy. > > >> > ERROR: could not install required dependancies for CSWnetsnmp > > >> [snip] > > >> > > > >> > Any suggestions or help would be greatly appreciated. > > >> > > > > > > >> This package comes in a patch > > > > > > Please will someone tell us which? > > > > > > > Sunsolve is our friend ... let me do a search. It's no friend of mine. I await info on patch number. From james at blastwave.org Thu Nov 9 10:31:35 2006 From: james at blastwave.org (James Lee) Date: Thu, 09 Nov 2006 09:31:35 GMT Subject: [csw-users] pkg-get help In-Reply-To: <20061108195821.94045.qmail@web56606.mail.re3.yahoo.com> References: <20061108195821.94045.qmail@web56606.mail.re3.yahoo.com> Message-ID: <20061109.9313500.1957257054@gyor.asd.demon.co.uk> On 08/11/06, 19:58:21, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > Thank you for your reply, but this did not fix my problem. > I still receive the same error when trying to execute pkg-get. > Any other suggestions or ideas?? No, investigate the same suggestion. > James Lee wrote: On 08/11/06, 17:48:52, Oldwen Adriano wrote > regarding Re: [csw-users] pkg-get help: > > #: / -> pkg-get -i wget > > WARNING: gpg not found > > NOTE: To have checksums compared, you must install one of: > > md5 or gmd5sum (gmd5sum is available with GNU textutils) > > try 'pkg-get install textutils' > > WARNING: no catalog file for site ftp.math.purdue.edu > > Updating catalog file first > > Getting catalog... > > /opt/csw/bin/pkg-get: wget: cannot execute Exactly the message I'm expect from pkg-get if wget did not have execute permission. Do some debugging, set the -x flag in pkg-get, etc. Find out why wget is not executing. James. From magrawal at coba.usf.edu Thu Nov 9 17:44:30 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 11:44:30 -0500 Subject: [csw-users] Per user directories Message-ID: I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: -bash-3.00# svcs -a | grep apa legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache disabled 17:22:58 svc:/network/http:apache2 online 11:29:36 svc:/network/http:cswapache2 In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: Include etc/extra/httpd-userdir.conf. I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: -bash-3.00$ pwd /home/ecomStudent/public_html -bash-3.00$ ls -al total 6 drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html However, when I try to access the file: http://ecom.ismlab.usf.edu/~ecomStudent/ I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. What else do I need to do to get per-user directories? Thanks -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From eric.enright at gmail.com Thu Nov 9 18:05:05 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 12:05:05 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: Message-ID: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> On 11/9/06, Manish Agrawal wrote: > I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > > -bash-3.00# svcs -a | grep apa > legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > disabled 17:22:58 svc:/network/http:apache2 > online 11:29:36 svc:/network/http:cswapache2 > > In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > Include etc/extra/httpd-userdir.conf. > > I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > > -bash-3.00$ pwd > /home/ecomStudent/public_html > -bash-3.00$ ls -al > total 6 > drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > > However, when I try to access the file: > http://ecom.ismlab.usf.edu/~ecomStudent/ > > I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. public_html needs execute permissions for group and other. -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 18:12:56 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 12:12:56 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> Message-ID: I had tried that before, and have done it again, but it does not help: -bash-3.00$ ls -al | grep public_html drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html http://ecom.ismlab.usf.edu/~ecomStudent Thanks Manish On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > On 11/9/06, Manish Agrawal wrote: >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> -bash-3.00# svcs -a | grep apa >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> disabled 17:22:58 svc:/network/http:apache2 >> online 11:29:36 svc:/network/http:cswapache2 >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> Include etc/extra/httpd-userdir.conf. >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> -bash-3.00$ pwd >> /home/ecomStudent/public_html >> -bash-3.00$ ls -al >> total 6 >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> However, when I try to access the file: >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > > public_html needs execute permissions for group and other. > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From magrawal at coba.usf.edu Thu Nov 9 18:47:18 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 12:47:18 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> Message-ID: To follow up, I created a user "temp" with a public_html directory and an index.html in the public_html directory, but http://ecom.ismlab.usf.edu/~temp does not work. Also, the directories are actually in /export/home/temp, but I am also able to get to them as /home/temp. I could send the uname/ passwd offline if it helps. Thanks Manish On Thu, 09 Nov 2006 12:12:56 -0500, Manish Agrawal wrote: > I had tried that before, and have done it again, but it does not help: > > -bash-3.00$ ls -al | grep public_html > drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > > http://ecom.ismlab.usf.edu/~ecomStudent > > Thanks > Manish > > On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > >> On 11/9/06, Manish Agrawal wrote: >>> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >>> >>> -bash-3.00# svcs -a | grep apa >>> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >>> disabled 17:22:58 svc:/network/http:apache2 >>> online 11:29:36 svc:/network/http:cswapache2 >>> >>> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >>> Include etc/extra/httpd-userdir.conf. >>> >>> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >>> >>> -bash-3.00$ pwd >>> /home/ecomStudent/public_html >>> -bash-3.00$ ls -al >>> total 6 >>> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >>> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >>> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >>> >>> However, when I try to access the file: >>> http://ecom.ismlab.usf.edu/~ecomStudent/ >>> >>> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> >> public_html needs execute permissions for group and other. >> > > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From eric.enright at gmail.com Thu Nov 9 18:50:35 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 12:50:35 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> Message-ID: <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> On 11/9/06, Manish Agrawal wrote: > I had tried that before, and have done it again, but it does not help: > > -bash-3.00$ ls -al | grep public_html > drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > > http://ecom.ismlab.usf.edu/~ecomStudent eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ Works for me. Can you access any of the files inside of this directory by typing it's URL? Regards, Eric > > Thanks > Manish > > On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > > > On 11/9/06, Manish Agrawal wrote: > >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > >> > >> -bash-3.00# svcs -a | grep apa > >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > >> disabled 17:22:58 svc:/network/http:apache2 > >> online 11:29:36 svc:/network/http:cswapache2 > >> > >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > >> Include etc/extra/httpd-userdir.conf. > >> > >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > >> > >> -bash-3.00$ pwd > >> /home/ecomStudent/public_html > >> -bash-3.00$ ls -al > >> total 6 > >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > >> > >> However, when I try to access the file: > >> http://ecom.ismlab.usf.edu/~ecomStudent/ > >> > >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > > > > public_html needs execute permissions for group and other. > > > > > > -- > Manish Agrawal > Asstt. Prof., Dept. of ISDS, Univ. of South Florida > 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 19:20:59 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 13:20:59 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> Message-ID: Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html Now, temp works: http://ecom.ismlab.usf.edu/~temp but my old account still does not work: http://ecom.ismlab.usf.edu/~ecomStudent All permissions in all directory pairs are identical: -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. -bash-3.00$ ls -al /home total 5 dr-xr-xr-x 2 root root 2 Nov 9 11:13 . drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent Thanks Manish On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: > On 11/9/06, Manish Agrawal wrote: >> I had tried that before, and have done it again, but it does not help: >> >> -bash-3.00$ ls -al | grep public_html >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html >> >> http://ecom.ismlab.usf.edu/~ecomStudent > > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ > > Works for me. Can you access any of the files inside of this > directory by typing it's URL? > > Regards, > Eric > >> >> Thanks >> Manish >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: >> >> > On 11/9/06, Manish Agrawal wrote: >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> >> >> -bash-3.00# svcs -a | grep apa >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> >> disabled 17:22:58 svc:/network/http:apache2 >> >> online 11:29:36 svc:/network/http:cswapache2 >> >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> >> Include etc/extra/httpd-userdir.conf. >> >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> >> >> -bash-3.00$ pwd >> >> /home/ecomStudent/public_html >> >> -bash-3.00$ ls -al >> >> total 6 >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> >> >> However, when I try to access the file: >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> > >> > public_html needs execute permissions for group and other. >> > >> >> >> >> -- >> Manish Agrawal >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users >> > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From wschaub at steubentech.com Thu Nov 9 20:08:34 2006 From: wschaub at steubentech.com (William Schaub) Date: Thu, 09 Nov 2006 14:08:34 -0500 Subject: [csw-users] Source code changes/Compilation procedures Message-ID: <45537CB2.7020903@steubentech.com> I am quite a fan of blastwave so far. however there is one thing it seems to lack and I wonder if i could get an answer to this one question. Is there a way to get a diff of the source code for each package showing what was changed to make the package compile? perhaps something like a simple diff file + the maintainers notes on successfully building a project? this is something I have very much missed with stuff like FreeBSD ports etc. because even though I like using binary packages and blastwave is of course a binary package distribution, some times I might want to build one of the blastwave packages from source with perhaps different compile time options, or even just to put it into its own place in /opt and have it separate from blastwave all together. But As I am sure you all know many open source packages are not that easy to build under Solaris and it would be so nice to be able to benefit from the work that the CSW maintainers have already done in getting those few packages built under Solaris. It would also be very helpful to the authors of the Open Source software since they can see the patches necessary for making their code work under Solaris. It would be nice if there were a few files distributed with the package itself possibly under /opt/CSW/share/doc/pkgname/ 1. A file describing the source versions used to build the package and any special procedures needed to make the project build. 2. a diff file suitable to be used with the GNU patch program to apply any modifications the package maintainer needed to do to the source to make the blastwave package. A similar approach was used in a binary package distribution for IRIX called nekoware. which is still active. check out their packaging guide at: http://forums.nekochan.net/viewtopic.php?t=3872 the part where it discusses compilation notes and a patch file is in the packaging section. I believe if this were done with Blastwave it would only serve to improve an already great service to the Solaris community. From a.cervellin at acm.org Thu Nov 9 20:10:43 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Thu, 09 Nov 2006 20:10:43 +0100 Subject: [csw-users] Source code changes/Compilation procedures In-Reply-To: <45537CB2.7020903@steubentech.com> References: <45537CB2.7020903@steubentech.com> Message-ID: <45537D33.6030504@acm.org> William Schaub wrote: > Is there a way to get a diff of the source code for each package showing > what was changed to make the package compile? perhaps something like a > simple diff file + the maintainers notes on successfully building a project? there are works in progress, take a look here: http://svn.blastwave.org/ From eric.enright at gmail.com Thu Nov 9 20:12:02 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 14:12:02 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> Message-ID: <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> On 11/9/06, Manish Agrawal wrote: > Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html > > Now, temp works: > http://ecom.ismlab.usf.edu/~temp > > but my old account still does not work: > http://ecom.ismlab.usf.edu/~ecomStudent > > All permissions in all directory pairs are identical: > -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html > drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent > drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html > drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp > drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html > > Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. Hmm, now I'm a little confused as to why it doesn't work. As for /home, directories get mounted there by the automounter. See /etc/auto_home. SMC probably created an entry in there, while useradd certainly does not. What are the user's home directories set to in /etc/passwd? Eric > -bash-3.00$ ls -al /home > total 5 > dr-xr-xr-x 2 root root 2 Nov 9 11:13 . > drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. > drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent > > Thanks > Manish > > > On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: > > > On 11/9/06, Manish Agrawal wrote: > >> I had tried that before, and have done it again, but it does not help: > >> > >> -bash-3.00$ ls -al | grep public_html > >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > >> > >> http://ecom.ismlab.usf.edu/~ecomStudent > > > > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html > > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ > > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ > > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ > > > > Works for me. Can you access any of the files inside of this > > directory by typing it's URL? > > > > Regards, > > Eric > > > >> > >> Thanks > >> Manish > >> > >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > >> > >> > On 11/9/06, Manish Agrawal wrote: > >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > >> >> > >> >> -bash-3.00# svcs -a | grep apa > >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > >> >> disabled 17:22:58 svc:/network/http:apache2 > >> >> online 11:29:36 svc:/network/http:cswapache2 > >> >> > >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > >> >> Include etc/extra/httpd-userdir.conf. > >> >> > >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > >> >> > >> >> -bash-3.00$ pwd > >> >> /home/ecomStudent/public_html > >> >> -bash-3.00$ ls -al > >> >> total 6 > >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > >> >> > >> >> However, when I try to access the file: > >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ > >> >> > >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > >> > > >> > public_html needs execute permissions for group and other. > >> > > >> > >> > >> > >> -- > >> Manish Agrawal > >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida > >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > >> _______________________________________________ > >> users mailing list > >> users at lists.blastwave.org > >> https://lists.blastwave.org/mailman/listinfo/users > >> > > > > > > > > -- > Manish Agrawal > Asstt. Prof., Dept. of ISDS, Univ. of South Florida > 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 20:16:15 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 14:16:15 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> Message-ID: -bash-3.00# cat /etc/passwd root:x:0:0:Super-User:/root:/usr/bin/bash daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: ecomStudent:x:100:10::/home/ecomStudent:/usr/bin/bash mysql:x:101:101::/opt/csw/mysql5:/bin/false temp:x:102:1::/export/home/temp:/usr/bin/bash Thanks Manish On Thu, 09 Nov 2006 14:12:02 -0500, Eric Enright wrote: > On 11/9/06, Manish Agrawal wrote: >> Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html >> >> Now, temp works: >> http://ecom.ismlab.usf.edu/~temp >> >> but my old account still does not work: >> http://ecom.ismlab.usf.edu/~ecomStudent >> >> All permissions in all directory pairs are identical: >> -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent >> drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html >> drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp >> drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html >> >> Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. > > Hmm, now I'm a little confused as to why it doesn't work. As for > /home, directories get mounted there by the automounter. See > /etc/auto_home. SMC probably created an entry in there, while useradd > certainly does not. > > What are the user's home directories set to in /etc/passwd? > > Eric > > >> -bash-3.00$ ls -al /home >> total 5 >> dr-xr-xr-x 2 root root 2 Nov 9 11:13 . >> drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent >> >> Thanks >> Manish >> >> >> On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: >> >> > On 11/9/06, Manish Agrawal wrote: >> >> I had tried that before, and have done it again, but it does not help: >> >> >> >> -bash-3.00$ ls -al | grep public_html >> >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html >> >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent >> > >> > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html >> > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ >> > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ >> > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ >> > >> > Works for me. Can you access any of the files inside of this >> > directory by typing it's URL? >> > >> > Regards, >> > Eric >> > >> >> >> >> Thanks >> >> Manish >> >> >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: >> >> >> >> > On 11/9/06, Manish Agrawal wrote: >> >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> >> >> >> >> -bash-3.00# svcs -a | grep apa >> >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> >> >> disabled 17:22:58 svc:/network/http:apache2 >> >> >> online 11:29:36 svc:/network/http:cswapache2 >> >> >> >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> >> >> Include etc/extra/httpd-userdir.conf. >> >> >> >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> >> >> >> >> -bash-3.00$ pwd >> >> >> /home/ecomStudent/public_html >> >> >> -bash-3.00$ ls -al >> >> >> total 6 >> >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> >> >> >> >> However, when I try to access the file: >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> >> >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> >> > >> >> > public_html needs execute permissions for group and other. >> >> > >> >> >> >> >> >> >> >> -- >> >> Manish Agrawal >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> >> _______________________________________________ >> >> users mailing list >> >> users at lists.blastwave.org >> >> https://lists.blastwave.org/mailman/listinfo/users >> >> >> > >> > >> >> >> >> -- >> Manish Agrawal >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users >> > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From eric.enright at gmail.com Thu Nov 9 20:25:42 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 14:25:42 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> Message-ID: <3a74b99d0611091125i2db10cabg44f62d3f48699ed7@mail.gmail.com> While logged in as temp, can you get to /home/ecomStudent/public_html? Eric On 11/9/06, Manish Agrawal wrote: > -bash-3.00# cat /etc/passwd > root:x:0:0:Super-User:/root:/usr/bin/bash > daemon:x:1:1::/: > bin:x:2:2::/usr/bin: > sys:x:3:3::/: > adm:x:4:4:Admin:/var/adm: > lp:x:71:8:Line Printer Admin:/usr/spool/lp: > uucp:x:5:5:uucp Admin:/usr/lib/uucp: > nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico > smmsp:x:25:25:SendMail Message Submission Program:/: > listen:x:37:4:Network Admin:/usr/net/nls: > gdm:x:50:50:GDM Reserved UID:/: > webservd:x:80:80:WebServer Reserved UID:/: > nobody:x:60001:60001:NFS Anonymous Access User:/: > noaccess:x:60002:60002:No Access User:/: > nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: > ecomStudent:x:100:10::/home/ecomStudent:/usr/bin/bash > mysql:x:101:101::/opt/csw/mysql5:/bin/false > temp:x:102:1::/export/home/temp:/usr/bin/bash > > Thanks > Manish > > On Thu, 09 Nov 2006 14:12:02 -0500, Eric Enright wrote: > > > On 11/9/06, Manish Agrawal wrote: > >> Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html > >> > >> Now, temp works: > >> http://ecom.ismlab.usf.edu/~temp > >> > >> but my old account still does not work: > >> http://ecom.ismlab.usf.edu/~ecomStudent > >> > >> All permissions in all directory pairs are identical: > >> -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html > >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent > >> drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html > >> drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp > >> drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html > >> > >> Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. > > > > Hmm, now I'm a little confused as to why it doesn't work. As for > > /home, directories get mounted there by the automounter. See > > /etc/auto_home. SMC probably created an entry in there, while useradd > > certainly does not. > > > > What are the user's home directories set to in /etc/passwd? > > > > Eric > > > > > >> -bash-3.00$ ls -al /home > >> total 5 > >> dr-xr-xr-x 2 root root 2 Nov 9 11:13 . > >> drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. > >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent > >> > >> Thanks > >> Manish > >> > >> > >> On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: > >> > >> > On 11/9/06, Manish Agrawal wrote: > >> >> I had tried that before, and have done it again, but it does not help: > >> >> > >> >> -bash-3.00$ ls -al | grep public_html > >> >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > >> >> > >> >> http://ecom.ismlab.usf.edu/~ecomStudent > >> > > >> > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html > >> > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ > >> > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ > >> > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ > >> > > >> > Works for me. Can you access any of the files inside of this > >> > directory by typing it's URL? > >> > > >> > Regards, > >> > Eric > >> > > >> >> > >> >> Thanks > >> >> Manish > >> >> > >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > >> >> > >> >> > On 11/9/06, Manish Agrawal wrote: > >> >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > >> >> >> > >> >> >> -bash-3.00# svcs -a | grep apa > >> >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > >> >> >> disabled 17:22:58 svc:/network/http:apache2 > >> >> >> online 11:29:36 svc:/network/http:cswapache2 > >> >> >> > >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > >> >> >> Include etc/extra/httpd-userdir.conf. > >> >> >> > >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > >> >> >> > >> >> >> -bash-3.00$ pwd > >> >> >> /home/ecomStudent/public_html > >> >> >> -bash-3.00$ ls -al > >> >> >> total 6 > >> >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > >> >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > >> >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > >> >> >> > >> >> >> However, when I try to access the file: > >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ > >> >> >> > >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > >> >> > > >> >> > public_html needs execute permissions for group and other. > >> >> > > >> >> > >> >> > >> >> > >> >> -- > >> >> Manish Agrawal > >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida > >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > >> >> _______________________________________________ > >> >> users mailing list > >> >> users at lists.blastwave.org > >> >> https://lists.blastwave.org/mailman/listinfo/users > >> >> > >> > > >> > > >> > >> > >> > >> -- > >> Manish Agrawal > >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida > >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > >> _______________________________________________ > >> users mailing list > >> users at lists.blastwave.org > >> https://lists.blastwave.org/mailman/listinfo/users > >> > > > > > > > > -- > Manish Agrawal > Asstt. Prof., Dept. of ISDS, Univ. of South Florida > 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 21:25:05 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 15:25:05 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611091125i2db10cabg44f62d3f48699ed7@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> <3a74b99d0611091125i2db10cabg44f62d3f48699ed7@mail.gmail.com> Message-ID: You mean: -bash-3.00$ su - temp Password: Sun Microsystems Inc. SunOS 5.10 Generic January 2005 -bash-3.00$ pwd /export/home/temp -bash-3.00$ ls -al /home/ecomStudent/public_html/ total 8 drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 . drwxr-xr-x 15 ecomStudent staff 1536 Nov 9 14:59 .. -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html -bash-3.00$ Thanks Manish On Thu, 09 Nov 2006 14:25:42 -0500, Eric Enright wrote: > While logged in as temp, can you get to /home/ecomStudent/public_html? > > Eric > > > On 11/9/06, Manish Agrawal wrote: >> -bash-3.00# cat /etc/passwd >> root:x:0:0:Super-User:/root:/usr/bin/bash >> daemon:x:1:1::/: >> bin:x:2:2::/usr/bin: >> sys:x:3:3::/: >> adm:x:4:4:Admin:/var/adm: >> lp:x:71:8:Line Printer Admin:/usr/spool/lp: >> uucp:x:5:5:uucp Admin:/usr/lib/uucp: >> nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico >> smmsp:x:25:25:SendMail Message Submission Program:/: >> listen:x:37:4:Network Admin:/usr/net/nls: >> gdm:x:50:50:GDM Reserved UID:/: >> webservd:x:80:80:WebServer Reserved UID:/: >> nobody:x:60001:60001:NFS Anonymous Access User:/: >> noaccess:x:60002:60002:No Access User:/: >> nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: >> ecomStudent:x:100:10::/home/ecomStudent:/usr/bin/bash >> mysql:x:101:101::/opt/csw/mysql5:/bin/false >> temp:x:102:1::/export/home/temp:/usr/bin/bash >> >> Thanks >> Manish >> >> On Thu, 09 Nov 2006 14:12:02 -0500, Eric Enright wrote: >> >> > On 11/9/06, Manish Agrawal wrote: >> >> Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html >> >> >> >> Now, temp works: >> >> http://ecom.ismlab.usf.edu/~temp >> >> >> >> but my old account still does not work: >> >> http://ecom.ismlab.usf.edu/~ecomStudent >> >> >> >> All permissions in all directory pairs are identical: >> >> -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html >> >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent >> >> drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html >> >> drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp >> >> drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html >> >> >> >> Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. >> > >> > Hmm, now I'm a little confused as to why it doesn't work. As for >> > /home, directories get mounted there by the automounter. See >> > /etc/auto_home. SMC probably created an entry in there, while useradd >> > certainly does not. >> > >> > What are the user's home directories set to in /etc/passwd? >> > >> > Eric >> > >> > >> >> -bash-3.00$ ls -al /home >> >> total 5 >> >> dr-xr-xr-x 2 root root 2 Nov 9 11:13 . >> >> drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. >> >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent >> >> >> >> Thanks >> >> Manish >> >> >> >> >> >> On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: >> >> >> >> > On 11/9/06, Manish Agrawal wrote: >> >> >> I had tried that before, and have done it again, but it does not help: >> >> >> >> >> >> -bash-3.00$ ls -al | grep public_html >> >> >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html >> >> >> >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent >> >> > >> >> > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html >> >> > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ >> >> > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ >> >> > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ >> >> > >> >> > Works for me. Can you access any of the files inside of this >> >> > directory by typing it's URL? >> >> > >> >> > Regards, >> >> > Eric >> >> > >> >> >> >> >> >> Thanks >> >> >> Manish >> >> >> >> >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: >> >> >> >> >> >> > On 11/9/06, Manish Agrawal wrote: >> >> >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> >> >> >> >> >> >> -bash-3.00# svcs -a | grep apa >> >> >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> >> >> >> disabled 17:22:58 svc:/network/http:apache2 >> >> >> >> online 11:29:36 svc:/network/http:cswapache2 >> >> >> >> >> >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> >> >> >> Include etc/extra/httpd-userdir.conf. >> >> >> >> >> >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> >> >> >> >> >> >> -bash-3.00$ pwd >> >> >> >> /home/ecomStudent/public_html >> >> >> >> -bash-3.00$ ls -al >> >> >> >> total 6 >> >> >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> >> >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> >> >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> >> >> >> >> >> >> However, when I try to access the file: >> >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> >> >> >> >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> >> >> > >> >> >> > public_html needs execute permissions for group and other. >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> Manish Agrawal >> >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> >> >> _______________________________________________ >> >> >> users mailing list >> >> >> users at lists.blastwave.org >> >> >> https://lists.blastwave.org/mailman/listinfo/users >> >> >> >> >> > >> >> > >> >> >> >> >> >> >> >> -- >> >> Manish Agrawal >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> >> _______________________________________________ >> >> users mailing list >> >> users at lists.blastwave.org >> >> https://lists.blastwave.org/mailman/listinfo/users >> >> >> > >> > >> >> >> >> -- >> Manish Agrawal >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users >> > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From oldwenstyle at yahoo.com Fri Nov 10 18:19:56 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Fri, 10 Nov 2006 09:19:56 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <20061108.18021700.889439035@gyor.asd.demon.co.uk> Message-ID: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> James, I really don't know a whole lot about Unix in general... I am trying to develop a PHP website, but I don't have gcc or PHP installed. I was hoping to accomplish this through pkg-get, but no success yet. I don't really know how to trouble shoot to make sure wget is an executable. I did apply the chmod command you gave me, but I still get an error. What can you tell me or help me with to understand how to accomplish my goal? Thank you for your help. Oldwen James Lee wrote: On 08/11/06, 17:48:52, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > #: / -> pkg-get -i wget > WARNING: gpg not found > NOTE: To have checksums compared, you must install one of: > md5 or gmd5sum (gmd5sum is available with GNU textutils) > try 'pkg-get install textutils' > WARNING: no catalog file for site ftp.math.purdue.edu > Updating catalog file first > Getting catalog... > /opt/csw/bin/pkg-get: wget: cannot execute This is another problem, I thought we'd do the top one first. I think you need: $ chmod +x /tmp/wget/wget _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061110/906aa76a/attachment.html From Darin.Perusich at cognigencorp.com Fri Nov 10 19:01:43 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Fri, 10 Nov 2006 13:01:43 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: <4554BE87.8090806@cognigencorp.com> which version of solaris are you running, "uname -a"? if you are running solaris 9 or 10 then wget is on the installation media that you used to install solaris, the wget package is SUNWwgetu and it installs in /usr/sfw/bin. do "ls -l /tmp/wget/wget" and email the output back to the list. Oldwen Adriano wrote: > James, > > I really don't know a whole lot about Unix in general... I am trying > to develop a PHP website, but I don't have gcc or PHP installed. I > was hoping to accomplish this through pkg-get, but no success yet. I > don't really know how to trouble shoot to make sure wget is an > executable. I did apply the chmod command you gave me, but I still > get an error. What can you tell me or help me with to understand how > to accomplish my goal? Thank you for your help. > > Oldwen > > James Lee wrote: On 08/11/06, 17:48:52, Oldwen > Adriano wrote regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have >> checksums compared, you must install one of: md5 or gmd5sum >> (gmd5sum is available with GNU textutils) try 'pkg-get install >> textutils' WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. I think > you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > > ------------------------------------------------------------------------ > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From magrawal at coba.usf.edu Sat Nov 11 04:53:52 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Fri, 10 Nov 2006 22:53:52 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: If you have Solaris 10 and have setup blastwave as per http://www.blastwave.org/howto.html Setting up SAMP (Solaris, Apache, MySQL, PHP) is easy. Just give the following commands: pkg-get install apache2 pkg-get install mysql5 pkg-get install php5 pkg-get install php5_mysql pkg-get install ap2_modphp5 svcadm disable apache2 You will then have to complete step 5 (for MySQL) at Neal Pollack's weblog http://blogs.sun.com/nealix/entry/samp_solaris_apache_2_mysql It really is rather easy. Manish On Fri, 10 Nov 2006 12:19:56 -0500, Oldwen Adriano wrote: > James, > I really don't know a whole lot about Unix in general... I am trying to develop a PHP website, but I don't have gcc or PHP installed. I was hoping to accomplish this through pkg-get, but no success yet. I don't really know how to trouble shoot to make sure wget is an executable. I did apply the chmod command you gave me, but I still get an error. What can you tell me or help me with to understand how to accomplish my goal? Thank you for your help. > Oldwen > > James Lee wrote: > On 08/11/06, 17:48:52, Oldwen Adriano wrote > regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget >> WARNING: gpg not found >> NOTE: To have checksums compared, you must install one of: >> md5 or gmd5sum (gmd5sum is available with GNU textutils) >> try 'pkg-get install textutils' >> WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first >> Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. > I think you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com From magrawal at coba.usf.edu Sat Nov 11 17:19:16 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Sat, 11 Nov 2006 11:19:16 -0500 Subject: [csw-users] Update Solaris 10 In-Reply-To: References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: How do you update a Solaris 10 x86 machine to apply all security patches? Is there a command like "patch all" or something that will figure out which patched are needed and apply them? Thanks Manish From a.cervellin at acm.org Sat Nov 11 18:11:09 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Sat, 11 Nov 2006 18:11:09 +0100 Subject: [csw-users] Update Solaris 10 In-Reply-To: References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: <4556042D.8080206@acm.org> Manish Agrawal wrote: > How do you update a Solaris 10 x86 machine to apply all security patches? > > Is there a command like "patch all" or something that will figure out which patched are needed and apply them? you have to download the "solaris 10 sun alert patch cluster" (or the full patch cluster) from here: http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access you need a sunsolve account and a valid service plan linked to it. once downloaded, unzip it and you'll find an installer script which will install all the patches. From amit.uttam at gmail.com Sat Nov 11 18:20:25 2006 From: amit.uttam at gmail.com (Amit) Date: Sat, 11 Nov 2006 09:20:25 -0800 Subject: [csw-users] Update Solaris 10 In-Reply-To: <4556042D.8080206@acm.org> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> <4556042D.8080206@acm.org> Message-ID: <90ee5fbb0611110920n1a1ceb58y386a66f9a5b1837a@mail.gmail.com> Hi, I do not use the official Sun Update from Sun as it is just a paint to set up and download. http://www.par.univie.ac.at/solaris/pca/ This is the best patch management system i've used. Very simple and straight forward. Check it out. On 11/11/06, Alessio Cervellin wrote: > Manish Agrawal wrote: > > How do you update a Solaris 10 x86 machine to apply all security patches? > > > > Is there a command like "patch all" or something that will figure out which patched are needed and apply them? > > you have to download the "solaris 10 sun alert patch cluster" (or the > full patch cluster) from here: > http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access > you need a sunsolve account and a valid service plan linked to it. > once downloaded, unzip it and you'll find an installer script which will > install all the patches. > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From pgress at optonline.net Sat Nov 11 18:25:20 2006 From: pgress at optonline.net (Paul Gress) Date: Sat, 11 Nov 2006 12:25:20 -0500 Subject: [csw-users] Update Solaris 10 In-Reply-To: <4556042D.8080206@acm.org> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> <4556042D.8080206@acm.org> Message-ID: <45560780.5090806@optonline.net> Alessio Cervellin wrote: > Manish Agrawal wrote: > >> How do you update a Solaris 10 x86 machine to apply all security patches? >> >> Is there a command like "patch all" or something that will figure out which patched are needed and apply them? >> > > you have to download the "solaris 10 sun alert patch cluster" (or the > full patch cluster) from here: > http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access > you need a sunsolve account and a valid service plan linked to it. > once downloaded, unzip it and you'll find an installer script which will > install all the patches. > _______________________________________________ > If you looking for an automatic way: /usr/sbin/smpatch update -L A GUI way: /usr/bin/updatemanager And most users favorite way is using PCA. You need to download the script. http://www.par.univie.ac.at/solaris/pca/ While all these way include some recommended patched, it will include all security. From oldwenstyle at yahoo.com Mon Nov 13 16:43:44 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:43:44 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: Message-ID: <20061113154344.81350.qmail@web56612.mail.re3.yahoo.com> I have SunOS 5.8 which I assume is version 8. Manish Agrawal wrote: If you have Solaris 10 and have setup blastwave as per http://www.blastwave.org/howto.html Setting up SAMP (Solaris, Apache, MySQL, PHP) is easy. Just give the following commands: pkg-get install apache2 pkg-get install mysql5 pkg-get install php5 pkg-get install php5_mysql pkg-get install ap2_modphp5 svcadm disable apache2 You will then have to complete step 5 (for MySQL) at Neal Pollack's weblog http://blogs.sun.com/nealix/entry/samp_solaris_apache_2_mysql It really is rather easy. Manish On Fri, 10 Nov 2006 12:19:56 -0500, Oldwen Adriano wrote: > James, > I really don't know a whole lot about Unix in general... I am trying to develop a PHP website, but I don't have gcc or PHP installed. I was hoping to accomplish this through pkg-get, but no success yet. I don't really know how to trouble shoot to make sure wget is an executable. I did apply the chmod command you gave me, but I still get an error. What can you tell me or help me with to understand how to accomplish my goal? Thank you for your help. > Oldwen > > James Lee wrote: > On 08/11/06, 17:48:52, Oldwen Adriano wrote > regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget >> WARNING: gpg not found >> NOTE: To have checksums compared, you must install one of: >> md5 or gmd5sum (gmd5sum is available with GNU textutils) >> try 'pkg-get install textutils' >> WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first >> Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. > I think you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061113/9d308927/attachment.html From oldwenstyle at yahoo.com Mon Nov 13 16:47:42 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:47:42 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <4554BE87.8090806@cognigencorp.com> Message-ID: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> #: / -> ls -l /tmp/wget/wget -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget #: / -> Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running solaris 9 or 10 then wget is on the installation media that you used to install solaris, the wget package is SUNWwgetu and it installs in /usr/sfw/bin. do "ls -l /tmp/wget/wget" and email the output back to the list. Oldwen Adriano wrote: > James, > > I really don't know a whole lot about Unix in general... I am trying > to develop a PHP website, but I don't have gcc or PHP installed. I > was hoping to accomplish this through pkg-get, but no success yet. I > don't really know how to trouble shoot to make sure wget is an > executable. I did apply the chmod command you gave me, but I still > get an error. What can you tell me or help me with to understand how > to accomplish my goal? Thank you for your help. > > Oldwen > > James Lee wrote: On 08/11/06, 17:48:52, Oldwen > Adriano wrote regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have >> checksums compared, you must install one of: md5 or gmd5sum >> (gmd5sum is available with GNU textutils) try 'pkg-get install >> textutils' WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. I think > you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > > ------------------------------------------------------------------------ > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Want to start your own business? Learn how on Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061113/a81ff0f1/attachment.html From Darin.Perusich at cognigencorp.com Mon Nov 13 16:52:04 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 10:52:04 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> Message-ID: <455894A4.7010001@cognigencorp.com> ok, do "/tmp/wget/wget --version" and email the output back to the list. this way we can see if wget is executing correctly. Oldwen Adriano wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > > Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running > solaris 9 or 10 then wget is on the installation media that you used to > install solaris, the wget package is SUNWwgetu and it installs in > /usr/sfw/bin. > > do "ls -l /tmp/wget/wget" and email the output back to the list. > -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From dclarke at blastwave.org Mon Nov 13 16:52:51 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 13 Nov 2006 10:52:51 -0500 (EST) Subject: [csw-users] pkg-get help In-Reply-To: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> Message-ID: <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > Dear Sir : I have been watching this thread for some time now. I feel that either I have made grave mistakes with the Blastwave HOWTO page or I have simply not stepped in soon enough to help you. First question I have for you is .. what sort of progress are you making? [ ] none - totally stalled [ ] little - I can't move forwards [ ] okay - I think I have it now ! [ ] done - that was easy Really, I clearly need to know if I need to tear down the HOWTO page and start over from scratch. Dennis Clarke dclarke at blastwave.org From oldwenstyle at yahoo.com Mon Nov 13 16:55:50 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:55:50 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <455894A4.7010001@cognigencorp.com> Message-ID: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> #: / -> /tmp/wget/wget --version ksh: /tmp/wget/wget: cannot execute #: / -> Darin Perusich wrote: ok, do "/tmp/wget/wget --version" and email the output back to the list. this way we can see if wget is executing correctly. Oldwen Adriano wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > > Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running > solaris 9 or 10 then wget is on the installation media that you used to > install solaris, the wget package is SUNWwgetu and it installs in > /usr/sfw/bin. > > do "ls -l /tmp/wget/wget" and email the output back to the list. > -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Everyone is raving about the all-new Yahoo! Mail beta. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061113/1421a592/attachment.html From oldwenstyle at yahoo.com Mon Nov 13 16:57:15 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:57:15 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> Message-ID: <20061113155716.1899.qmail@web56615.mail.re3.yahoo.com> I have followed the directions on the "how to" page several times to no avail. Answer: little Dennis Clarke wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > Dear Sir : I have been watching this thread for some time now. I feel that either I have made grave mistakes with the Blastwave HOWTO page or I have simply not stepped in soon enough to help you. First question I have for you is .. what sort of progress are you making? [ ] none - totally stalled [ ] little - I can't move forwards [ ] okay - I think I have it now ! [ ] done - that was easy Really, I clearly need to know if I need to tear down the HOWTO page and start over from scratch. Dennis Clarke dclarke at blastwave.org _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Want to start your own business? Learn how on Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061113/6864885c/attachment.html From EBradley at williams-int.com Mon Nov 13 17:03:58 2006 From: EBradley at williams-int.com (EBradley at williams-int.com) Date: Mon, 13 Nov 2006 11:03:58 -0500 Subject: [csw-users] pkg-get help Message-ID: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> >Really, I clearly need to know if I need to tear down the HOWTO page and >start over from scratch. I don't think that's necessary. I've used the HOWTO when setting up pkg-get at least 5 times over the past year when loading/reloading my Solaris 9 and/or 10 machine(s) here at work, with successful results each time. Evan Bradley ________________________________ From: users-bounces+ebradley=williams-int.com at lists.blastwave.org [mailto:users-bounces+ebradley=williams-int.com at lists.blastwave.org] On Behalf Of Oldwen Adriano Sent: Monday, November 13, 2006 10:57 AM To: questions and discussions Subject: Re: [csw-users] pkg-get help I have followed the directions on the "how to" page several times to no avail. Answer: little Dennis Clarke wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > Dear Sir : I have been watching this thread for some time now. I feel that either I have made grave mistakes with the Blastwave HOWTO page or I have simply not stepped in soon enough to help you. First question I have for you is .. what sort of progress are you making? [ ] none - totally stalled [ ] little - I can't move forwards [ ] okay - I think I have it now ! [ ] done - that was easy Really, I clearly need to know if I need to tear down the HOWTO page and start over from scratch. Dennis Clarke dclarke at blastwave.org _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users ________________________________ Want to start your own business? Learn how on Yahoo! Small Business. From Darin.Perusich at cognigencorp.com Mon Nov 13 17:05:04 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 11:05:04 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> References: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> Message-ID: <455897B0.7020300@cognigencorp.com> the problem is the wget that you've downloaded, if it cannot execute then pkg-get will never work. you can download a working wget at this location: http://www.blastwave.org/wget-sparc.bin once you downloaded it, move it to /tmp/wget and continue to follow the HOWTO at http://www.blastwave.org/howto.html. Oldwen Adriano wrote: > #: / -> /tmp/wget/wget --version > ksh: /tmp/wget/wget: cannot execute > #: / -> > > Darin Perusich wrote: > ok, > > do "/tmp/wget/wget --version" and email the output back to the list. > this way we can see if wget is executing correctly. > > Oldwen Adriano wrote: >> #: / -> ls -l /tmp/wget/wget >> -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget >> #: / -> >> >> >> Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running >> solaris 9 or 10 then wget is on the installation media that you used to >> install solaris, the wget package is SUNWwgetu and it installs in >> /usr/sfw/bin. >> >> do "ls -l /tmp/wget/wget" and email the output back to the list. >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From Darin.Perusich at cognigencorp.com Mon Nov 13 17:08:53 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 11:08:53 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> Message-ID: <45589895.2090007@cognigencorp.com> dennis, they howto page is fine. what i think we should to is setup an ftp server so that users can easily get wget-sparc.bin and wget-i386.bin. we forget that a generic solaris installation doesn't really have a decient tool set for downloading files other then ftp. while netscape MIGHT be on the system the user may be using telnet/ssh to get into the machine or even worse logged in via the console. Dennis Clarke wrote: > > Dear Sir : > > I have been watching this thread for some time now. I feel that either > I have made grave mistakes with the Blastwave HOWTO page or I have simply > not stepped in soon enough to help you. > > First question I have for you is .. what sort of progress are you making? > > [ ] none - totally stalled > > [ ] little - I can't move forwards > > [ ] okay - I think I have it now ! > > [ ] done - that was easy > > Really, I clearly need to know if I need to tear down the HOWTO page and > start over from scratch. > > Dennis Clarke > dclarke at blastwave.org > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From oldwenstyle at yahoo.com Mon Nov 13 17:25:01 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 08:25:01 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <455897B0.7020300@cognigencorp.com> Message-ID: <20061113162501.20545.qmail@web56602.mail.re3.yahoo.com> I can't thank you enough... That was exactly the problem. Thank you for your time and expertise. At the end of the install I did get this error. ## Executing checkinstall script. ERROR: /dev/random must exist ERROR: /dev/urandom must exist For solaris 8 sparc, install patch 112438 For solaris 8 x86, install patch 112439 pkgadd: ERROR: checkinstall script did not complete successfully Installation of failed. No changes were made to the system. ERROR: could not add CSWossl. ERROR: install of CSWossl failed ERROR: could not install required dependancies for CSWwget #: /tmp/wget -> Is this cause for concern? Oldwen Darin Perusich wrote: the problem is the wget that you've downloaded, if it cannot execute then pkg-get will never work. you can download a working wget at this location: http://www.blastwave.org/wget-sparc.bin once you downloaded it, move it to /tmp/wget and continue to follow the HOWTO at http://www.blastwave.org/howto.html. Oldwen Adriano wrote: > #: / -> /tmp/wget/wget --version > ksh: /tmp/wget/wget: cannot execute > #: / -> > > Darin Perusich wrote: > ok, > > do "/tmp/wget/wget --version" and email the output back to the list. > this way we can see if wget is executing correctly. > > Oldwen Adriano wrote: >> #: / -> ls -l /tmp/wget/wget >> -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget >> #: / -> >> >> >> Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running >> solaris 9 or 10 then wget is on the installation media that you used to >> install solaris, the wget package is SUNWwgetu and it installs in >> /usr/sfw/bin. >> >> do "ls -l /tmp/wget/wget" and email the output back to the list. >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061113/aace2bba/attachment.html From Darin.Perusich at cognigencorp.com Mon Nov 13 17:32:49 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 11:32:49 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061113162501.20545.qmail@web56602.mail.re3.yahoo.com> References: <20061113162501.20545.qmail@web56602.mail.re3.yahoo.com> Message-ID: <45589E31.3070507@cognigencorp.com> you need to install the latest patch cluster on the system to bring it up to date. go to http://sunsolve.sun.com and create an account. then download the latest solaris 8 patch cluster, it's about 160mb in size. once you've installed this you should be able to continue with pkg-get. Oldwen Adriano wrote: > I can't thank you enough... That was exactly the problem. Thank you > for your time and expertise. At the end of the install I did get > this error. > > ## Executing checkinstall script. ERROR: /dev/random must exist > ERROR: /dev/urandom must exist For solaris 8 sparc, install patch > 112438 For solaris 8 x86, install patch 112439 pkgadd: ERROR: > checkinstall script did not complete successfully Installation of > failed. No changes were made to the system. ERROR: could > not add CSWossl. ERROR: install of CSWossl failed ERROR: could not > install required dependancies for CSWwget #: /tmp/wget -> > > Is this cause for concern? > > Oldwen > > Darin Perusich wrote: the problem > is the wget that you've downloaded, if it cannot execute then pkg-get > will never work. > > you can download a working wget at this location: > > http://www.blastwave.org/wget-sparc.bin > > once you downloaded it, move it to /tmp/wget and continue to follow > the HOWTO at http://www.blastwave.org/howto.html. > > > Oldwen Adriano wrote: >> #: / -> /tmp/wget/wget --version ksh: /tmp/wget/wget: cannot >> execute #: / -> >> >> Darin Perusich wrote: ok, >> >> do "/tmp/wget/wget --version" and email the output back to the >> list. this way we can see if wget is executing correctly. >> >> Oldwen Adriano wrote: >>> #: / -> ls -l /tmp/wget/wget -rwxr-xr-x 1 root staff 164576 Nov 3 >>> 16:06 /tmp/wget/wget #: / -> >>> >>> >>> Darin Perusich wrote: which version of solaris are you running, >>> "uname -a"? if you are running solaris 9 or 10 then wget is on >>> the installation media that you used to install solaris, the wget >>> package is SUNWwgetu and it installs in /usr/sfw/bin. >>> >>> do "ls -l /tmp/wget/wget" and email the output back to the list. >>> >> >> ------------------------------------------------------------------------ >> >> >> _______________________________________________ users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users > > > ------------------------------------------------------------------------ > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From dclarke at blastwave.org Mon Nov 13 18:03:43 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 13 Nov 2006 12:03:43 -0500 (EST) Subject: [csw-users] pkg-get help In-Reply-To: <20061113155716.1899.qmail@web56615.mail.re3.yahoo.com> References: <20061113155716.1899.qmail@web56615.mail.re3.yahoo.com> Message-ID: <37714.24.146.17.108.1163437423.squirrel@mail.blastwave.org> > I have followed the directions on the "how to" page several times to no > avail. > > Answer: little > In that case I probably have a non-trivial number of users that try to follow it and then give up. I'll give it some thought. Dennis From coolvibe at hackerheaven.org Mon Nov 13 18:04:24 2006 From: coolvibe at hackerheaven.org (Emiel Kollof) Date: Mon, 13 Nov 2006 18:04:24 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> References: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> Message-ID: <200611131804.29517.coolvibe@hackerheaven.org> Op maandag 13 november 2006 17:03, schreef EBradley at williams-int.com: > >Really, I clearly need to know if I need to tear down the HOWTO page > > and > > >start over from scratch. > > I don't think that's necessary. I've used the HOWTO when setting up > pkg-get at least 5 times over the past year when loading/reloading my > Solaris 9 and/or 10 machine(s) here at work, with successful results > each time. ACK, same for me. Cheers, Emiel -- Wisdom is knowing what to do with what you know. -- J. Winter Smith -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 191 bytes Desc: not available Url : http://lists.blastwave.org/pipermail/users/attachments/20061113/458bc54b/attachment.bin From oldwenstyle at yahoo.com Mon Nov 13 18:21:00 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 09:21:00 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <37714.24.146.17.108.1163437423.squirrel@mail.blastwave.org> Message-ID: <20061113172100.81457.qmail@web56607.mail.re3.yahoo.com> Just to be clear, my problem is lack of knowledge for Unix in general. I think the "HowTo" page is great and I am pleased with the site overall. The only thing I would suggest is to point someone who is brand new to Unix to some sort of self-help tutorial resource that you may know of. Thanks for all your help. Oldwen Dennis Clarke wrote: > I have followed the directions on the "how to" page several times to no > avail. > > Answer: little > In that case I probably have a non-trivial number of users that try to follow it and then give up. I'll give it some thought. Dennis _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061113/12abfedc/attachment.html From dclarke at blastwave.org Mon Nov 13 18:38:00 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 13 Nov 2006 12:38:00 -0500 (EST) Subject: [csw-users] pkg-get help In-Reply-To: <20061113172100.81457.qmail@web56607.mail.re3.yahoo.com> References: <20061113172100.81457.qmail@web56607.mail.re3.yahoo.com> Message-ID: <43238.24.146.17.108.1163439480.squirrel@mail.blastwave.org> > Just to be clear, my problem is lack of knowledge for Unix in general. I > think the "HowTo" page is great and I am pleased with the site overall. The > only thing I would suggest is to point someone who is brand new to Unix to > some sort of self-help tutorial resource that you may know of. Thanks for > all your help. > OKay ... in that case you are swimming in a whole new world at the moment and I can understand your frustration. I recall, once upon a time, that I told a user that Solaris is great because it has a manpage for everything. The horrible thing is that it has a manpage for everything and they don't really tell you how to get the job done! So I think I'll put up a big bold link at the top of that page that says : Are you totally new to Solaris and UNIX or Linux in general ? If so then I have really easy to follow instructions >>HERE<< That sort of thing. Dennis From mlh at zip.com.au Tue Nov 14 02:34:12 2006 From: mlh at zip.com.au (Matthew Hannigan) Date: Tue, 14 Nov 2006 12:34:12 +1100 Subject: [csw-users] pkg-get help In-Reply-To: <45589895.2090007@cognigencorp.com> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> Message-ID: <20061114013412.GA4231@evofed.localdomain> On Mon, Nov 13, 2006 at 11:08:53AM -0500, Darin Perusich wrote: > dennis, > > they howto page is fine. what i think we should to is setup an ftp > server so that users can easily get wget-sparc.bin and wget-i386.bin. we > forget that a generic solaris installation doesn't really have a decient > tool set for downloading files other then ftp. while netscape MIGHT be Yes, then you could provide a shell script that would setup ftp to bootstrap blastwave non-interactively. Matt From mlh at zip.com.au Tue Nov 14 02:35:23 2006 From: mlh at zip.com.au (Matthew Hannigan) Date: Tue, 14 Nov 2006 12:35:23 +1100 Subject: [csw-users] pkg-get help In-Reply-To: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> References: <455894A4.7010001@cognigencorp.com> <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> Message-ID: <20061114013523.GB4231@evofed.localdomain> > Oldwen Adriano wrote: > > #: / -> ls -l /tmp/wget/wget > > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > > #: / -> > > On Mon, Nov 13, 2006 at 07:55:50AM -0800, Oldwen Adriano wrote: > #: / -> /tmp/wget/wget --version > ksh: /tmp/wget/wget: cannot execute > #: / -> > I wonder if perhaps /tmp is mounted -noexec. Matt From ihsan at blastwave.org Tue Nov 14 09:00:19 2006 From: ihsan at blastwave.org (Ihsan Dogan) Date: Tue, 14 Nov 2006 09:00:19 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <20061114013412.GA4231@evofed.localdomain> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> Message-ID: <45597793.1040909@blastwave.org> Hello Matthew, Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: >> they howto page is fine. what i think we should to is setup an ftp >> server so that users can easily get wget-sparc.bin and wget-i386.bin. we >> forget that a generic solaris installation doesn't really have a decient >> tool set for downloading files other then ftp. while netscape MIGHT be > > Yes, then you could provide a shell script that would > setup ftp to bootstrap blastwave non-interactively. You are free to provide us such a script. :-) Ihsan -- ihsan at dogan.ch http://ihsan.dogan.ch/ From mlh at zip.com.au Tue Nov 14 11:21:36 2006 From: mlh at zip.com.au (Matthew Hannigan) Date: Tue, 14 Nov 2006 21:21:36 +1100 Subject: [csw-users] pkg-get help In-Reply-To: <45597793.1040909@blastwave.org> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> <45597793.1040909@blastwave.org> Message-ID: <20061114102136.GH4231@evofed.localdomain> On Tue, Nov 14, 2006 at 09:00:19AM +0100, Ihsan Dogan wrote: > Hello Matthew, > > Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: > > >> they howto page is fine. what i think we should to is setup an ftp > >> server so that users can easily get wget-sparc.bin and wget-i386.bin. we > >> forget that a generic solaris installation doesn't really have a decient > >> tool set for downloading files other then ftp. while netscape MIGHT be > > > > Yes, then you could provide a shell script that would > > setup ftp to bootstrap blastwave non-interactively. > > You are free to provide us such a script. :-) Yes, fair enough :-) Here's a non-tested version: ftp -in ftp.blastwave.org < References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> <45597793.1040909@blastwave.org> Message-ID: <43442.24.146.17.108.1163533590.squirrel@mail.blastwave.org> > Hello Matthew, > > Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: > >>> they howto page is fine. what i think we should to is setup an ftp >>> server so that users can easily get wget-sparc.bin and wget-i386.bin. we >>> forget that a generic solaris installation doesn't really have a decient >>> tool set for downloading files other then ftp. while netscape MIGHT be >> >> Yes, then you could provide a shell script that would >> setup ftp to bootstrap blastwave non-interactively. > > You are free to provide us such a script. :-) I have been working on such a thing, off and on for a while. The trick comes down to simply doing LOTS and LOTS of checking for the existence of this binary or that binary etc etc. I'll just take my prototype and post it out such that we can maybe refine it. But, at the moment, its really infantile. So you will have to wait until next week. As for anonumous FTP access to the Blastwave binaries, that's real easy. $ ftp ftp.ibiblio.org Connected to ibiblio.org. 220 ProFTPD Server (Bring it on...) Name (ftp.ibiblio.org:dclarke): anonymous 331 Anonymous login ok, send your complete email address as your password. Password: 230- Welcome to ftp.ibiblio.org, the public ftp server of ibiblio.org. We hope you find what you're looking for. If you have any problems or questions, please send email to ftpkeeper at ibiblio.org Thanks! 230 Anonymous access granted, restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. so we can easily create a script that will go get the wget binary. Dennis From realmcking at gmail.com Wed Nov 15 02:51:45 2006 From: realmcking at gmail.com (Mark McCoy) Date: Tue, 14 Nov 2006 19:51:45 -0600 Subject: [csw-users] pkg-get help In-Reply-To: <20061114102136.GH4231@evofed.localdomain> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> <45597793.1040909@blastwave.org> <20061114102136.GH4231@evofed.localdomain> Message-ID: On 11/14/06, Matthew Hannigan wrote: > On Tue, Nov 14, 2006 at 09:00:19AM +0100, Ihsan Dogan wrote: > > Hello Matthew, > > > > Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: > > > > >> they howto page is fine. what i think we should to is setup an ftp > > >> server so that users can easily get wget-sparc.bin and wget-i386.bin. we > > >> forget that a generic solaris installation doesn't really have a decient > > >> tool set for downloading files other then ftp. while netscape MIGHT be > > > > > > Yes, then you could provide a shell script that would > > > setup ftp to bootstrap blastwave non-interactively. > > > > You are free to provide us such a script. :-) > > Yes, fair enough :-) > > Here's a non-tested version: > > ftp -in ftp.blastwave.org < user ftp blastwave at invalid.com > get pkg_get.pkg > ! > yes | pkgadd -d pkg_get.pkg all > > > Matt > > > > > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > How about changing the "!" for your HERE document to something that isn't interpreted by a lot of shells these days? ftp -in ftp.ibiblio.org < Message-ID: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Hello all, Thanks for all your help with pkg-get... I have been able to install the gcc compiler, apache, and php5.... I can't thank you enough. I do have a couple of questions and since most of you are experts I am sure this is easy for you, but new to me...... Where did the PHP5 install to when I ran pkg-get? How do I configure apache to use PHP5? Thank you so much. Oldwen __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061115/3173f412/attachment.html From amit.uttam at gmail.com Wed Nov 15 22:42:53 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 15 Nov 2006 13:42:53 -0800 Subject: [csw-users] pkg-get help In-Reply-To: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> References: <43442.24.146.17.108.1163533590.squirrel@mail.blastwave.org> <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Message-ID: <90ee5fbb0611151342r3a657d6dj69569d142ee6c324@mail.gmail.com> Hey there, A couple of things: 1) All software installed from blastwave (using pkg-get -i) are installed in /opt/csw. 2) Thus, PHP5 will be installed under /opt/csw but I am not sure under which directory (could be under /opt/csw/bin or a separate directory under /opt/csw). 3) As for configuring PHP5 with apache, it all depends of the apache version and the set up that you want. It is too much to cover here and there are tons of resources on the web to do that. A couple of sites: http://www.howtoforge.com/apache2_with_php5_and_php4 This assumes of course that you have installed apache2. Hope this helps. Amit On 11/15/06, Oldwen Adriano wrote: > Hello all, > > Thanks for all your help with pkg-get... I have been able to install the gcc > compiler, apache, and php5.... I can't thank you enough. I do have a couple > of questions and since most of you are experts I am sure this is easy for > you, but new to me...... > > Where did the PHP5 install to when I ran pkg-get? > > How do I configure apache to use PHP5? > > Thank you so much. > > Oldwen > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > From a.cervellin at acm.org Wed Nov 15 23:17:24 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Wed, 15 Nov 2006 23:17:24 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> References: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Message-ID: <455B91F4.1050809@acm.org> Oldwen Adriano wrote: > Hello all, > > Thanks for all your help with pkg-get... I have been able to install the > gcc compiler, apache, and php5.... I can't thank you enough. I do have > a couple of questions and since most of you are experts I am sure this > is easy for you, but new to me...... > > Where did the PHP5 install to when I ran pkg-get? /opt/csw/bin/php5 (to discover where a package put its files, you have at least 2 ways: 1) go to http://www.blastwave.org/packages/ and click on "view files in package" 2) issue the following command in a shell: pkgchk -l > How do I configure apache to use PHP5? pkg-get -i ap2_modphp5 (it should automatically configure everything for you) From a.cervellin at acm.org Wed Nov 15 23:22:02 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Wed, 15 Nov 2006 23:22:02 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <455B91F4.1050809@acm.org> References: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> <455B91F4.1050809@acm.org> Message-ID: <455B930A.1090809@acm.org> Alessio Cervellin wrote: > Oldwen Adriano wrote: >> Hello all, >> >> Thanks for all your help with pkg-get... I have been able to install the >> gcc compiler, apache, and php5.... I can't thank you enough. I do have >> a couple of questions and since most of you are experts I am sure this >> is easy for you, but new to me...... >> >> Where did the PHP5 install to when I ran pkg-get? > > /opt/csw/bin/php5 i meant /opt/csw/php5, sorry From mats.larsson at ericsson.com Thu Nov 16 09:42:40 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 16 Nov 2006 09:42:40 +0100 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061030050102.GA19736@blastwave.org> References: <20061030050102.GA19736@blastwave.org> Message-ID: <455C2480.8070605@ericsson.com> Did an upgrade to latest Gaim today (2.0.0,REV=2006.11.13) and now it won't start. Instead a popup says: Gstreamer faild to initialize. And the gaim process goes into a loop: 24722: poll(0x003B75E0, 4, 4687) (sleeping...) 24722: signotifywait() (sleeping...) 24722: lwp_cond_wait(0xFDDF34F0, 0xFDDF3500, 0xFDDECD88) (sleeping...) 24722: door_return(0x00000000, 0, 0x00000000, 0) (sleeping...) 24722: lwp_cond_wait(0xFDDF34F0, 0xFDDF3500, 0xFDDECD88) (sleeping...) 24722: poll(0x003B75E0, 4, 4687) = 0 24722: write(4, "9601\002\0\0\0 -", 8) = 8 24722: read(4, 0xFFBEEBB8, 32) Err#11 EAGAIN 24722: poll(0xFFBEE968, 1, -1) = 1 24722: read(4, "010302A6\0\0\0\0\0\0\0 ,".., 32) = 32 24722: ioctl(4, FIONREAD, 0xFFBEECAC) = 0 24722: poll(0x003B75E0, 4, 2578) (sleeping...) 24722: signotifywait() (sleeping...) 24722: lwp_cond_wait(0xFDDF34F0, 0xFDDF3500, 0xFDDECD88) (sleeping...) 24722: door_return(0x00000000, 0, 0x00000000, 0) (sleeping...) ... Anyone else seeing this? BR MOL From javier.augusto at gmx.net Thu Nov 16 12:50:25 2006 From: javier.augusto at gmx.net (Javier O. Augusto) Date: Thu, 16 Nov 2006 12:50:25 +0100 Subject: [csw-users] Latest Gaim problem In-Reply-To: <455C2480.8070605@ericsson.com> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> Message-ID: <20061116115025.271810@gmx.net> Greetings, > Did an upgrade to latest Gaim today (2.0.0,REV=2006.11.13) and now it > won't start. Are you trying to use the MSN network? If so, IIRC the MSN plugin is kinda broken, unless you grab the latest code off cvs... HTH, -- Javier "Ein Herz f?r Kinder" - Ihre Spende hilft! Aktion: www.deutschlandsegelt.de Unser Dankesch?n: Ihr Name auf dem Segel der 1. deutschen America's Cup-Yacht! From aaron at ernieball.com Fri Nov 17 00:54:19 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Thu, 16 Nov 2006 15:54:19 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061116115025.271810@gmx.net> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> <20061116115025.271810@gmx.net> Message-ID: <455CFA2B.6060305@ernieball.com> An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061116/2695da32/attachment.html From mats.larsson at ericsson.com Thu Nov 16 13:10:14 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 16 Nov 2006 13:10:14 +0100 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061116115025.271810@gmx.net> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> <20061116115025.271810@gmx.net> Message-ID: <455C5526.5050205@ericsson.com> On 2006-11-16 12:50, Javier O. Augusto wrote: > Greetings, >> Did an upgrade to latest Gaim today (2.0.0,REV=2006.11.13) and now it >> won't start. > Are you trying to use the MSN network? If so, IIRC the MSN plugin is kinda broken, unless you grab the latest code off cvs... Yes I am. But the MSN plugin works with the previous (2.0.0,REV=2006.10.13) version which I've reverted to. MOL From aaron at ernieball.com Fri Nov 17 01:06:18 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Thu, 16 Nov 2006 16:06:18 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <455CFA2B.6060305@ernieball.com> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> <20061116115025.271810@gmx.net> <455CFA2B.6060305@ernieball.com> Message-ID: <455CFCFA.6010208@ernieball.com> An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061116/4ca4c718/attachment.html From tmcmahon2 at yahoo.com Fri Nov 17 05:53:16 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Thu, 16 Nov 2006 20:53:16 -0800 (PST) Subject: [csw-users] Latest Gaim problem Message-ID: <20061117045316.30571.qmail@web51801.mail.yahoo.com> Hi Folks. I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. ____________________________________________________________________________________ Sponsored Link Mortgage rates near 39yr lows. $310k for $999/mo. Calculate new payment! www.LowerMyBills.com/lre From magrawal at coba.usf.edu Fri Nov 17 19:06:12 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Fri, 17 Nov 2006 13:06:12 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> References: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Message-ID: You may recall my earlier suggested sequence of packages (it worked for me with no additional configuration except for mysql). I am just a few months ahead of you in UNIX experience. You will probably end up needing mysql as well. php5_mysql in the set does that. You will probably also find that after all your work, phpinfo() does not work. The last command svcadm ... takes care of that. pkg-get install apache2 pkg-get install mysql5 pkg-get install php5 pkg-get install php5_mysql pkg-get install ap2_modphp5 svcadm disable apache2 You will also need the information in Neal Pollack's blog to configure mysql5. It would actually be great if that little configuration step (step 5 in http://blogs.sun.com/nealix/entry/samp_solaris_apache_2_mysql) was handled by the installation process itself. Then the above set of commands would be all that was necessary to set up SAMP from Blastwave. Manish On Wed, 15 Nov 2006 13:03:49 -0500, Oldwen Adriano wrote: > Hello all, > Thanks for all your help with pkg-get... I have been able to install the gcc compiler, apache, and php5.... I can't thank you enough. I do have a couple of questions and since most of you are experts I am sure this is easy for you, but new to me...... > Where did the PHP5 install to when I ran pkg-get? > How do I configure apache to use PHP5? > Thank you so much. > Oldwen > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com From magrawal at coba.usf.edu Fri Nov 17 19:34:06 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Fri, 17 Nov 2006 13:34:06 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> References: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> Message-ID: The HOWTO page is actually very good. But I must admit that newbies like me can use a little more hand-holding and correct file names. My suggestions are below: 1. In step 1 for get pkgget, you could add the following hand-holding statements - "save it to your desktop and use an FTP program to upload the file to the server/Solaris 10 machine". (recommend say filezilla for FTP and a directory on the server (say /tmp). It would be great if you also provide some policy notes here - this is a good directory because the files automatically get deleted on reboot or whatever is generally recommended) 2. For wget: You mention about the version in /usr/sfw/bin. So, what should we do with it? LEave it as is? Delete it? If I donwload the new wget, how will it get precedence over this? Also, the filename is actually wget-i386.bin (this created confusion for me the first time because I created the /tmp/wget directory and put the file in the /tmp/wget directory following your directions) Suggest rewrite the following: Regardless of where you get that little binary from you need to put it in /tmp/wget and make sure that it is executable. That means that you may need to do this: # chmod 755 /tmp/wget As: Regardless of where you get that little binary from, you need to put it in /tmp. Once again, you can download the file from the link above, save it to your desktop and use Filezilla to upload it to your server). The full file path will be /tmp/wget-i386.bin. Make sure that it is executable. That means that you may need to do this : # chmod 755 /tmp/wget-i386.bin 3. Again in step 3, for # PATH=/tmp:/opt/csw/bin:/usr/sbin:/usr/bin:/usr/dt/bin:/usr/openwin/bin:/usr/ccs/bin # export PATH I would suggest you make it shorter (# PATH=/tmp:/opt/csw/bin:/usr/sbin:/usr/bin) because later you are suggesting doing it in the /etc/default/login file anyway. Same thing in step 7: Also correct our PATH : # PATH=/opt/csw/bin:/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/dt/bin:/usr/ccs/bin # export PATH I have always wondered why the PATH variables for both users and su are set in 2 files - /etc/default/login and /etc/default/su. Thanks Manish From maybird1776 at yahoo.com Sat Nov 18 12:37:47 2006 From: maybird1776 at yahoo.com (ken mays) Date: Sat, 18 Nov 2006 03:37:47 -0800 (PST) Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed Message-ID: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> Hello, CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 minutes on a SunBlade 100. Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW GNOME 2.14.3 at: http://www.blastwave.org/testing. All reported bugs are now resolved and I consider this release production-ready at this moment (as good as any other Linux/BSD distro). You can get a recent copy of CSW GNOME 2.14.3 at: pkg-get -Uu -f -s http://www.blastwave.solaris-fr.org/unstable Enjoy, Ken Mays EarthLink, Inc. ____________________________________________________________________________________ Sponsored Link Compare mortgage rates for today. Get up to 5 free quotes. Www2.nextag.com From dclarke at blastwave.org Sat Nov 18 15:39:58 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Sat, 18 Nov 2006 09:39:58 -0500 (EST) Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed In-Reply-To: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> References: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> Message-ID: <60206.70.50.140.192.1163860798.squirrel@mail.blastwave.org> > Hello, > > CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 > minutes on a SunBlade 100. > Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW > GNOME 2.14.3 at: http://www.blastwave.org/testing. > > All reported bugs are now resolved and I consider this release > production-ready at this moment (as good as any other Linux/BSD distro). > > You can get a recent copy of CSW GNOME 2.14.3 at: > > > pkg-get -Uu -f -s http://www.blastwave.solaris-fr.org/unstable > So what are you doing with the gnometest.blastwave.org ? I will need to do some tests here on Solaris 8 and for these tests I'll need to use the gnometest site that we all agreed to some time ago. Dennis From ihsan at dogan.ch Sat Nov 18 22:57:30 2006 From: ihsan at dogan.ch (Ihsan Dogan) Date: Sat, 18 Nov 2006 22:57:30 +0100 Subject: [csw-users] pkg-get help In-Reply-To: References: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> Message-ID: <455F81CA.5030509@dogan.ch> on 17.11.2006 19:34 Manish Agrawal said the following: > 2. For wget: You mention about the version in /usr/sfw/bin. So, what should we do with it? LEave it as is? Delete it? If I donwload the new wget, how will it get precedence over this? With wget it's the same with all other packages on the system. For example gtk is also coming with Solaris, but the package from Blastwave is in general newer. It's up to you if you delete the package or not. I would just leave it. It does not hurt and disks are these days not expensive. Ihsan -- ihsan at dogan.ch http://ihsan.dogan.ch/ From J.Langner at fz-rossendorf.de Mon Nov 20 13:57:11 2006 From: J.Langner at fz-rossendorf.de (Jens Langner) Date: Mon, 20 Nov 2006 13:57:11 +0100 Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed In-Reply-To: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> References: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> Message-ID: <4561A627.4010600@fz-rossendorf.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ken mays schrieb: > CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 minutes on a SunBlade 100. > Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW GNOME 2.14.3 at: http://www.blastwave.org/testing. > > All reported bugs are now resolved and I consider this release production-ready at this moment (as good as any other Linux/BSD distro). Sorry to disappoint you once again, but after having installed the gnomevfs2 package you are refering to, the splash screen still takes 2-3 minutes for vanishing, as well as the background image takes the same time to load up. So I consider this problem as not being fixed yet and wouldn't consider the blastwave GNOME to be production ready. And please note that I have tried the recent GNOME stuff on our 2.10 server with the very latest patches and I even rebooted it. Nothing has changed after having installed the 2006.11.15 package of gnomevfs2. cheers, jens - -- Jens Langner Ph: +49-351-2602757 Forschungszentrum Rossendorf e.V. Institute of Radiopharmacy - PET Center J.Langner at fz-rossendorf.de Germany http://www.jens-langner.de/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQCVAwUBRWGmJ5FDGXNZvoo5AQJb8AQAheUBKcDReES/lrvu6yX9ZwVP6Kw3Mplh FeaCdnZvbuD+4wTAXm23lT50MVd0o2qqW2snJQvXYbMuhbDdsjkQyqFwcmUBFM+Y IfihiJtNTAimmrdgECuw6ssU91g0nbjGF+zWh3MPU8xMBGwtW8C4C8ywm1YDAy8P ch23p6kmfMw= =hczc -----END PGP SIGNATURE----- From maybird1776 at yahoo.com Mon Nov 20 14:30:09 2006 From: maybird1776 at yahoo.com (ken mays) Date: Mon, 20 Nov 2006 05:30:09 -0800 (PST) Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed Message-ID: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> Hi Jens, Interesting. I have the same delay time of 2.5 minutes, yet the menu comes up and the splash screen disappears properly. I also ran the login times for Sun JDS which were very similar on the same platform (SunBlade 100). Besides this delay, everything else works fine. Now on a modern high-end x64 platform, I get these results with CSW GNOME 2.14.3: 1. GNOME login screen to initial Splash screen: 20 seconds 2. GNOME login screen to initial Background image with full menu: 58 seconds. I'll look into this further, but at least the splash screen and background image is working properly without any user intervention. Ken ----- Original Message ---- From: Jens Langner To: questions and discussions Sent: Monday, November 20, 2006 7:57:11 AM Subject: Re: [csw-users] CSW GNOME 2.14.3 login delay fixed -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ken mays schrieb: > CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 minutes on a SunBlade 100. > Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW GNOME 2.14.3 at: http://www.blastwave.org/testing. > > All reported bugs are now resolved and I consider this release production-ready at this moment (as good as any other Linux/BSD distro). Sorry to disappoint you once again, but after having installed the gnomevfs2 package you are refering to, the splash screen still takes 2-3 minutes for vanishing, as well as the background image takes the same time to load up. So I consider this problem as not being fixed yet and wouldn't consider the blastwave GNOME to be production ready. And please note that I have tried the recent GNOME stuff on our 2.10 server with the very latest patches and I even rebooted it. Nothing has changed after having installed the 2006.11.15 package of gnomevfs2. cheers, jens - -- Jens Langner Ph: +49-351-2602757 Forschungszentrum Rossendorf e.V. Institute of Radiopharmacy - PET Center J.Langner at fz-rossendorf.de Germany http://www.jens-langner.de/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQCVAwUBRWGmJ5FDGXNZvoo5AQJb8AQAheUBKcDReES/lrvu6yX9ZwVP6Kw3Mplh FeaCdnZvbuD+4wTAXm23lT50MVd0o2qqW2snJQvXYbMuhbDdsjkQyqFwcmUBFM+Y IfihiJtNTAimmrdgECuw6ssU91g0nbjGF+zWh3MPU8xMBGwtW8C4C8ywm1YDAy8P ch23p6kmfMw= =hczc -----END PGP SIGNATURE----- _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users ____________________________________________________________________________________ Sponsored Link $200,000 mortgage for $660/ mo - 30/15 yr fixed, reduce debt - http://yahoo.ratemarketplace.com From aaron at ernieball.com Tue Nov 21 01:31:01 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Mon, 20 Nov 2006 16:31:01 -0800 Subject: [csw-users] Evince In-Reply-To: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> References: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> Message-ID: <456248C5.5080509@ernieball.com> I just installed Evince and get the following error. Any ideas? ld.so.1: evince: fatal: relocation error: file /opt/csw/lib/gtk-2.0/2.10.0/printbackends/libprintbackend-cups.so: symbol create_pickone_option_custom: referenced symbol not found From a.cervellin at acm.org Tue Nov 21 06:29:26 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Tue, 21 Nov 2006 06:29:26 +0100 Subject: [csw-users] Evince In-Reply-To: <456248C5.5080509@ernieball.com> References: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> <456248C5.5080509@ernieball.com> Message-ID: <45628EB6.6020701@acm.org> Aaron Wilson wrote: > I just installed Evince and get the following error. > > Any ideas? > > ld.so.1: evince: fatal: relocation error: file > /opt/csw/lib/gtk-2.0/2.10.0/printbackends/libprintbackend-cups.so: > symbol create_pickone_option_custom: referenced symbol not found it's due to this bug: http://www.blastwave.org/mantis/view_bug_page.php?f_id=1935 the package misses the "depend" file so the dependencies are not being automatically installed. A fixed version will be out soon, in the meanwhile you can install the dependencies manually: P CSWbonobo2 P CSWesound P CSWexpat P CSWfconfig P CSWftype2 P CSWgconf2 P CSWggettext P CSWglib2 P CSWgnomekeyring P CSWgnomevfs2 P CSWgtk2 P CSWiconv P CSWjpeg P CSWlibart P CSWlibatk P CSWlibbonoboui P CSWlibcairo P CSWlibglade2 P CSWlibgnome P CSWlibgnomecanvas P CSWlibgnomeprint P CSWlibgnomeprintui P CSWlibgnomeui P CSWlibnet P CSWlibpopt P CSWlibxml2 P CSWlibxrender P CSWnautilus P CSWorbit2 P CSWossl P CSWpango P CSWpng P CSWpoppler P CSWsunmath P CSWzlib P CSWaudiofile From aaron at ernieball.com Tue Nov 21 16:51:41 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Tue, 21 Nov 2006 07:51:41 -0800 Subject: [csw-users] Evince In-Reply-To: <45628EB6.6020701@acm.org> References: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> <456248C5.5080509@ernieball.com> <45628EB6.6020701@acm.org> Message-ID: <4563208D.4070108@ernieball.com> An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061121/a4424ce6/attachment.html From aaron at ernieball.com Tue Nov 21 16:55:32 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Tue, 21 Nov 2006 07:55:32 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061117045316.30571.qmail@web51801.mail.yahoo.com> References: <20061117045316.30571.qmail@web51801.mail.yahoo.com> Message-ID: <45632174.7080509@ernieball.com> All I get is a pop up that says "GStreamer failed to initialize." and there is a Close button. No output in the terminal window I'm running Gaim from. Torrey McMahon wrote: > Hi Folks. > > > > I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. > > > > > > > ____________________________________________________________________________________ > Sponsored Link > > Mortgage rates near 39yr lows. > $310k for $999/mo. Calculate new payment! > www.LowerMyBills.com/lre > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From pgress at optonline.net Tue Nov 21 17:29:40 2006 From: pgress at optonline.net (Paul Gress) Date: Tue, 21 Nov 2006 11:29:40 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45632174.7080509@ernieball.com> References: <20061117045316.30571.qmail@web51801.mail.yahoo.com> <45632174.7080509@ernieball.com> Message-ID: <45632974.4070009@optonline.net> Aaron Wilson wrote: > All I get is a pop up that says "GStreamer failed to initialize." and > there is a Close button. No output in the terminal window I'm running > Gaim from. > > > > Torrey McMahon wrote: > >> Hi Folks. >> >> >> >> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >> >> I too was getting the same message, and I thought Gaim wasn't working after I clicked close. But I noticed on my task bar there was a gaim icon. Upon clicking on that icon the gaim window popped up working except for sound. So I basically reverted to the previous release. http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz Paul From a.cervellin at virgilio.it Tue Nov 21 17:34:29 2006 From: a.cervellin at virgilio.it (Alessio Cervellin) Date: Tue, 21 Nov 2006 17:34:29 +0100 (GMT+01:00) Subject: [csw-users] Evince Message-ID: <10f0b5e5919.a.cervellin@virgilio.it> So you still have the problem even after installing all the dependencies? Anyway the missing lib shown in the error you say is in CSWgtk2 ----Messaggio originale---- Da: aaron at ernieball.com Data: 21- nov-2006 4.51 PM A: "questions and discussions" Ogg: Re: [csw-users] Evince _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave. org/mailman/listinfo/users From tmcmahon2 at yahoo.com Tue Nov 21 19:59:03 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Tue, 21 Nov 2006 13:59:03 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45632974.4070009@optonline.net> References: <20061117045316.30571.qmail@web51801.mail.yahoo.com> <45632174.7080509@ernieball.com> <45632974.4070009@optonline.net> Message-ID: <45634C77.7000001@yahoo.com> Paul Gress wrote: > Aaron Wilson wrote: > >> All I get is a pop up that says "GStreamer failed to initialize." and >> there is a Close button. No output in the terminal window I'm running >> Gaim from. >> >> >> >> Torrey McMahon wrote: >> >> >>> Hi Folks. >>> >>> >>> >>> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >>> >>> >>> > > I too was getting the same message, and I thought Gaim wasn't working > after I clicked close. But I noticed on my task bar there was a gaim > icon. Upon clicking on that icon the gaim window popped up working > except for sound. So I basically reverted to the previous release. > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz > > One of the problems is that the gaim developers decided to switch to gstreamer between betas. (From what I can see ..) The second is that I don't have a solaris box to test stuff on so I'm sorry this is taking so long. Ken - Is there a command that can check on gstreamer running, its config, etc? From maybird1776 at yahoo.com Wed Nov 22 12:51:38 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 03:51:38 -0800 (PST) Subject: [csw-users] Latest Gaim problem Message-ID: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> You can use 'gst-launch' and 'gst-inspect'. Check which sound plugin module GAIM is trying to use. I was thinking we could also switch GAIM in properties to use an older sound library like esd to fix that issue. ~ Ken ----- Original Message ---- From: Torrey McMahon To: questions and discussions ; maybird1776 at yahoo.com Sent: Tuesday, November 21, 2006 1:59:03 PM Subject: Re: [csw-users] Latest Gaim problem Paul Gress wrote: > Aaron Wilson wrote: > >> All I get is a pop up that says "GStreamer failed to initialize." and >> there is a Close button. No output in the terminal window I'm running >> Gaim from. >> >> >> >> Torrey McMahon wrote: >> >> >>> Hi Folks. >>> >>> >>> >>> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >>> >>> >>> > > I too was getting the same message, and I thought Gaim wasn't working > after I clicked close. But I noticed on my task bar there was a gaim > icon. Upon clicking on that icon the gaim window popped up working > except for sound. So I basically reverted to the previous release. > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz > > One of the problems is that the gaim developers decided to switch to gstreamer between betas. (From what I can see ..) The second is that I don't have a solaris box to test stuff on so I'm sorry this is taking so long. Ken - Is there a command that can check on gstreamer running, its config, etc? ____________________________________________________________________________________ Sponsored Link Rates near 39yr lows. $510,000 Loan for $1698/mo. Calcuate new payment. www.LowerMyBills.com/lre From rme at cnd-ag.ch Wed Nov 22 15:57:51 2006 From: rme at cnd-ag.ch (Roland Meier) Date: Wed, 22 Nov 2006 15:57:51 +0100 Subject: [csw-users] thttpd does not start Message-ID: <4564656F.5020405@cnd-ag.ch> Hello, I've installed the thttpd package. Unfortunately thttpd does not start and it doesn't give any error message: bash-3.00# truss /opt/csw/thttpd/sbin/thttpd -C /opt/csw/etc/thttpd.conf execve("/opt/csw/thttpd/sbin/thttpd", 0xFFBFFDB4, 0xFFBFFDC4) argc = 3 resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12 resolvepath("/opt/csw/thttpd/sbin/thttpd", "/opt/csw/thttpd/sbin/thttpd", 1023) = 27 stat("/opt/csw/thttpd/sbin/thttpd", 0xFFBFFB90) = 0 open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT stat("/lib/libresolv.so.2", 0xFFBFF6B0) = 0 resolvepath("/lib/libresolv.so.2", "/lib/libresolv.so.2", 1023) = 19 open("/lib/libresolv.so.2", O_RDONLY) = 3 mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000 mmap(0x00010000, 335872, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF340000 mmap(0xFF340000, 245997, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF340000 mmap(0xFF38E000, 10420, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 253952) = 0xFF38E000 munmap(0xFF37E000, 65536) = 0 memcntl(0xFF340000, 36184, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 stat("/lib/libsocket.so.1", 0xFFBFF6B0) = 0 resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19 open("/lib/libsocket.so.1", O_RDONLY) = 3 mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000 mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000 mmap(0xFF310000, 44006, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000 mmap(0xFF32C000, 4285, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF32C000 munmap(0xFF31C000, 65536) = 0 memcntl(0xFF310000, 13952, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 stat("/lib/libnsl.so.1", 0xFFBFF6B0) = 0 resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16 open("/lib/libnsl.so.1", O_RDONLY) = 3 mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000 mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000 mmap(0xFF200000, 591502, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000 mmap(0xFF2A2000, 33573, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFF2A2000 mmap(0xFF2AC000, 23056, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2AC000 munmap(0xFF292000, 65536) = 0 memcntl(0xFF200000, 89076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 stat("/lib/libc.so.1", 0xFFBFF6B0) = 0 resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14 open("/lib/libc.so.1", O_RDONLY) = 3 mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000 mmap(0x00010000, 991232, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF100000 mmap(0xFF100000, 882285, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF100000 mmap(0xFF1E8000, 29469, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 884736) = 0xFF1E8000 mmap(0xFF1F0000, 2592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F0000 munmap(0xFF1D8000, 65536) = 0 mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000 memcntl(0xFF100000, 139784, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 munmap(0xFF3A0000, 8192) = 0 mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3A0000 getcontext(0xFFBFF888) getrlimit(RLIMIT_STACK, 0xFFBFF868) = 0 getpid() = 12630 [12629] setustack(0xFF3A2088) sigfillset(0xFF1EFB20) = 0 stat("/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1", 0xFFBFF340) = 0 resolvepath("/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1", "/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 37 open("/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1", O_RDONLY) = 3 mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF2F0000 close(3) = 0 fstat(-1, 0xFFBFE608) Err#9 EBADF open("/dev/conslog", O_WRONLY) = 3 fcntl(3, F_SETFD, 0x00000001) = 0 fstat(3, 0xFFBFE608) = 0 open("/opt/csw/etc/thttpd.conf", O_RDONLY) = 4 fstat64(4, 0xFFBFBD88) = 0 brk(0x0003EC90) = 0 brk(0x00042C90) = 0 fstat64(4, 0xFFBFBC30) = 0 ioctl(4, TCGETA, 0xFFBFBD14) Err#25 ENOTTY read(4, " # T h i s s e c t i".., 8192) = 294 read(4, 0x0003EC9C, 8192) = 0 llseek(4, 0, SEEK_CUR) = 294 close(4) = 0 brk(0x00042C90) = 0 brk(0x00044C90) = 0 time() = 1164206749 open("/usr/share/lib/zoneinfo/Europe/Zurich", O_RDONLY) = 4 fstat64(4, 0xFFBFE520) = 0 read(4, " T Z i f\0\0\0\0\0\0\0\0".., 685) = 685 close(4) = 0 getuid() = 0 [0] open64("/var/run/name_service_door", O_RDONLY) = 4 fcntl(4, F_SETFD, 0x00000001) = 0 door_info(4, 0xFF1EF7E8) = 0 door_call(4, 0xFFBFE1C0) = 0 open("/var/log/thttpd.log", O_WRONLY|O_APPEND|O_CREAT, 0666) = 5 llseek(5, 0, SEEK_END) = 0 fcntl(5, F_SETFD, 0x00000001) = 0 getuid() = 0 [0] fchown(5, 102, 1) = 0 chdir("/opt/csw/thttpd/www") = 0 getcwd("/opt/csw/thttpd/www", 1024) = 0 llseek(0, 0, SEEK_CUR) = 19087 close(0) = 0 close(1) = 0 close(2) = 0 schedctl() = 0xFF2E0000 fork1() = 12631 lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF] _exit(0) This happens just after thttpd was installed. Any ideas what is going wrong here? Cheers, Roland -- ************************************** Computer + Network Division AG Roland Meier Bahnhofstrasse 28 8307 Effretikon Tel: 052/355'13'12 E-Mail: rme at cnd-ag.ch ************************************** From pfelecan at blastwave.org Wed Nov 22 16:14:23 2006 From: pfelecan at blastwave.org (Peter FELECAN) Date: Wed, 22 Nov 2006 16:14:23 +0100 Subject: [csw-users] /testing GnuCash available for QA Message-ID: A new release of the GnuCash packages can be found in the testing area: - the core package: /export/medusa/testing/gnucash-2.0.2,REV=2006.11.09-SunOS5.8-i386-CSW.pkg.gz /export/medusa/testing/gnucash-2.0.2,REV=2006.11.09-SunOS5.8-sparc-CSW.pkg.gz /export/medusa/testing/gnucashcommon-2.0.2,REV=2006.11.09-SunOS5.8-all-CSW.pkg.gz - the documentation package: /export/medusa/testing/gnucashdoc-2.0.1-SunOS5.8-all-CSW.pkg.gz The documentation is in its own package because for the moment the upstream code base is not yet synchronised. You can install them using pkgadd; first gnucashcommon and then gnucash. Note that there are 2 important dependencies for those using OFX imports: libofx and opensp; they need to have the following versions: - opensp: 1.5.2 - libofx: 0.8.2,REV=2006.11.19 and are already available in the unstable branch. There are 2 known issues: 1. The documentation cannot be accessed because yelp doesn't work, at least for me --- see: http://www.blastwave.org/mantis/view_bug_page.php?f_id=0001867 However, you can access the documentation by using the SUN provided yelp: /usr/bin/yelp \ ghelp:/opt/csw/share/gnome/help/gnucash/C/gnucash-help.xml and /usr/bin/yelp \ ghelp:/opt/csw/share/gnome/help/gnucash/C/gnucash-guide.xml 2. Printing doesn't work; however, you can print by exporting your report in HTML and use your preferred UA to print it. As there is no GnuCash mantis category, if you find a bug please report directly to my Blastwave address. Enjoy. -- Peter From tmcmahon2 at yahoo.com Wed Nov 22 20:49:37 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 14:49:37 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> Message-ID: <4564A9D1.3030307@yahoo.com> They made gstreamer the default though you can make a couple of changes in the preferences panel. I think ESD was the one that was recently removed. (Again, I can't check.) If someone that is seeing the gstreamer issue could run the commands below *before* they run gaim it would help to figure out whats going on. ken mays wrote: > You can use 'gst-launch' and 'gst-inspect'. Check which sound plugin module GAIM is trying to use. I was thinking we could also switch GAIM in properties to use an older sound library like esd to fix that issue. > > ~ Ken > > > ----- Original Message ---- > From: Torrey McMahon > To: questions and discussions ; maybird1776 at yahoo.com > Sent: Tuesday, November 21, 2006 1:59:03 PM > Subject: Re: [csw-users] Latest Gaim problem > > > Paul Gress wrote: > >> Aaron Wilson wrote: >> >> >>> All I get is a pop up that says "GStreamer failed to initialize." and >>> there is a Close button. No output in the terminal window I'm running >>> Gaim from. >>> >>> >>> >>> Torrey McMahon wrote: >>> >>> >>> >>>> Hi Folks. >>>> >>>> >>>> >>>> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >>>> >>>> >>>> >>>> >> I too was getting the same message, and I thought Gaim wasn't working >> after I clicked close. But I noticed on my task bar there was a gaim >> icon. Upon clicking on that icon the gaim window popped up working >> except for sound. So I basically reverted to the previous release. >> >> >> http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz >> >> >> http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz >> >> >> > > One of the problems is that the gaim developers decided to switch to > gstreamer between betas. (From what I can see ..) The second is that I > don't have a solaris box to test stuff on so I'm sorry this is taking so > long. > > Ken - Is there a command that can check on gstreamer running, its > config, etc? > > > > ____________________________________________________________________________________ > Sponsored Link > > Rates near 39yr lows. $510,000 Loan for $1698/mo. > Calcuate new payment. www.LowerMyBills.com/lre > > > From aaron at ernieball.com Wed Nov 22 21:11:09 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Wed, 22 Nov 2006 12:11:09 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564A9D1.3030307@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> Message-ID: <4564AEDD.1050806@ernieball.com> An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061122/09ea1ffa/attachment.html From maybird1776 at yahoo.com Wed Nov 22 22:12:44 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 13:12:44 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564AEDD.1050806@ernieball.com> Message-ID: <2688.9476.qm@web33605.mail.mud.yahoo.com> Hmmm.... if this is the case.. you don't have all the Gstreamer sound modules in place. This is the issue I see - you need gst-plugins-good, gst-plugins-bad installed to give you up to 64 plugins with 235 features). Torrey - you can build gst-plugins-bad and gst-plugins-ugly for Blastwave submission... I see during the 'gaim -d' out put that it tries to init the sound drivers. I don't see an error here. I'll dump the gaim -d output in a few... ~ Ken ____________________________________________________________________________________ Sponsored Link Online or Campus degree Associate's, Bachelor's, or Master's in less than one year.www.findtherightschool.com From tmcmahon2 at yahoo.com Wed Nov 22 22:26:37 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 16:26:37 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <2688.9476.qm@web33605.mail.mud.yahoo.com> References: <2688.9476.qm@web33605.mail.mud.yahoo.com> Message-ID: <4564C08D.7030604@yahoo.com> ken mays wrote: > Hmmm.... > > if this is the case.. you don't have all the Gstreamer > sound modules in place. This is the issue I see - you > need gst-plugins-good, gst-plugins-bad installed to > give you up to 64 plugins with 235 features). > > Torrey - you can build gst-plugins-bad and > gst-plugins-ugly for Blastwave submission... I'll get on that ... but would having the base and ugly plugins be a good idea as well? (And who names this stuff?) From maybird1776 at yahoo.com Wed Nov 22 22:26:33 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 13:26:33 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564A9D1.3030307@yahoo.com> Message-ID: <625667.49851.qm@web33609.mail.mud.yahoo.com> Torrey, You may need to install or build gst-plugins-good/bad/ugly to get more sound plugins.. ~ Ken Mays Output below: --------------------- > gst-inspect Total count: 68 plugins, 235 features -------------------- bash-3.00# gst-launch flacdec Setting pipeline to PAUSED ... ERROR: Pipeline doesn't want to pause. Setting pipeline to NULL ... FREEING pipeline ... bash-3.00# -------------------- bash-3.00# gaim -d GTK Accessibility Module initialized plugins: probing /opt/csw/lib/gaim/extplacement.so plugins: probing /opt/csw/lib/gaim/gaimrc.so plugins: probing /opt/csw/lib/gaim/gestures.so plugins: probing /opt/csw/lib/gaim/gevolution.so plugins: probing /opt/csw/lib/gaim/history.so plugins: probing /opt/csw/lib/gaim/iconaway.so plugins: probing /opt/csw/lib/gaim/idle.so plugins: probing /opt/csw/lib/gaim/libgg.so plugins: probing /opt/csw/lib/gaim/libirc.so plugins: probing /opt/csw/lib/gaim/libjabber.so plugins: probing /opt/csw/lib/gaim/libmsn.so plugins: probing /opt/csw/lib/gaim/libnovell.so plugins: probing /opt/csw/lib/gaim/liboscar.so plugins: probing /opt/csw/lib/gaim/libqq.so plugins: probing /opt/csw/lib/gaim/libsametime.so plugins: /opt/csw/lib/gaim/libsametime.so has a prefs_info, but is a prpl. This is no longer supported. plugins: probing /opt/csw/lib/gaim/libsimple.so plugins: probing /opt/csw/lib/gaim/libyahoo.so plugins: probing /opt/csw/lib/gaim/libzephyr.so plugins: probing /opt/csw/lib/gaim/log_reader.so plugins: probing /opt/csw/lib/gaim/notify.so plugins: probing /opt/csw/lib/gaim/psychic.so plugins: probing /opt/csw/lib/gaim/relnot.so plugins: probing /opt/csw/lib/gaim/spellchk.so plugins: probing /opt/csw/lib/gaim/ssl-gnutls.so plugins: probing /opt/csw/lib/gaim/ssl-nss.so plugins: probing /opt/csw/lib/gaim/ssl.so plugins: probing /opt/csw/lib/gaim/statenotify.so plugins: probing /opt/csw/lib/gaim/tcl.so plugins: probing /opt/csw/lib/gaim/ticker.so plugins: probing /opt/csw/lib/gaim/timestamp.so plugins: probing /opt/csw/lib/gaim/timestamp_format.so util: Reading file accounts.xml from directory //.gaim util: Reading file status.xml from directory //.gaim stun: using server stun: using server sound: Initializing sound output drivers. util: Reading file blist.xml from directory //.gaim util: File //.gaim/blist.xml does not exist (this is not necessarily an error) prefs: Reading //.gaim/prefs.xml prefs: Finished reading //.gaim/prefs.xml gtkblist: added visibility manager: 1 docklet: created pounce: Error reading pounces: Failed to open file '//.gaim/pounces.xml': No such file or directory Session Management: ICE initialized. Session Management: Connecting with no previous ID Session Management: Handling new ICE connection... done. Session Management: Connected to manager (GnomeSM) with client ID 1000006eb5000116423042200000076740007 Session Management: Using gaim as command gtkspell: Failed to setup GtkSpell: aspell: No word lists can be found for the language "en_US". account: Connecting to account marvin at hotmail.com util: Writing file accounts.xml to directory //.gaim Session Management: Received first save_yourself Session Management: Received save_complete docklet: failed to embed within timeout gtkblist: removed visibility manager: 0 main: Unloading all plugins plugins: Unloading plugin Gadu-Gadu plugins: Unloading plugin IRC plugins: Unloading plugin Jabber plugins: Unloading plugin MSN plugins: Unloading plugin GroupWise plugins: Unloading plugin AIM/ICQ plugins: Unloading plugin QQ plugins: Unloading plugin Sametime plugins: Unloading plugin SIMPLE plugins: Unloading plugin Yahoo plugins: Unloading plugin Zephyr plugins: Unloading plugin Tcl Plugin Loader Session Management: Handling closed ICE connection... done. Session Management: Connection closed. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. bash-3.00# ____________________________________________________________________________________ Want to start your own business? Learn how on Yahoo! Small Business. http://smallbusiness.yahoo.com/r-index From maybird1776 at yahoo.com Wed Nov 22 22:29:41 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 13:29:41 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564C08D.7030604@yahoo.com> Message-ID: <452578.68745.qm@web33615.mail.mud.yahoo.com> Yes... you need the other sound plugins installed. At least that will give you the compatible sound files you need then set your preferences command to launch whatever sound file you want that is compatible to GAIM. You may want to set that up in a default file so users don't have to deal with setting it up or messing with Gstreamer commands. Ken M. ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From tmcmahon2 at yahoo.com Wed Nov 22 22:31:52 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 16:31:52 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564C08D.7030604@yahoo.com> References: <2688.9476.qm@web33605.mail.mud.yahoo.com> <4564C08D.7030604@yahoo.com> Message-ID: <4564C1C8.1030004@yahoo.com> Torrey McMahon wrote: > ken mays wrote: > >> Hmmm.... >> >> if this is the case.. you don't have all the Gstreamer >> sound modules in place. This is the issue I see - you >> need gst-plugins-good, gst-plugins-bad installed to >> give you up to 64 plugins with 235 features). >> >> Torrey - you can build gst-plugins-bad and >> gst-plugins-ugly for Blastwave submission... >> > > I'll get on that ... but would having the base and ugly plugins be a > good idea as well? (And who names this stuff?) > ... though I meant base and core ... but I see you already have those. From tmcmahon2 at yahoo.com Wed Nov 22 22:36:09 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 16:36:09 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564AEDD.1050806@ernieball.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> Message-ID: <4564C2C9.8060204@yahoo.com> Aaron and others that are seeing this problem - Can you check to see if you have the CSWgstplugins and CSWgstpluginsgood installed? If not try to install one, run gaim, see if sound works, install the other, run gaim, see if sound works. It might be I need to include one of those as a dependency. Usually, the packaging system picks up such things but it might have missed it this time due to the way gstreamer loads things up. Aaron Wilson wrote: > Here is what I get from those commands > > bash-3.00$ ./gst-launch > ERROR: pipeline could not be constructed: empty pipeline not allowed. > > > bash-3.00$ ./gst-inspect > coreindexers: fileindex: A index that stores entries in file > coreindexers: memindex: A index that stores entries in memory > coreelements: typefind: TypeFind > coreelements: tee: Tee pipe fitting > coreelements: filesink: File Sink > coreelements: queue: Queue > coreelements: identity: Identity > coreelements: filesrc: File Source > coreelements: fdsink: Filedescriptor Sink > coreelements: fdsrc: Disk Source > coreelements: fakesink: Fake Sink > coreelements: fakesrc: Fake Source > coreelements: capsfilter: CapsFilter > staticelements: bin: Generic bin > staticelements: pipeline: Pipeline object > > Total count: 3 plugins, 15 features > > > > Torrey McMahon wrote: >> They made gstreamer the default though you can make a couple of changes >> in the preferences panel. I think ESD was the one that was recently >> removed. (Again, I can't check.) >> >> If someone that is seeing the gstreamer issue could run the commands >> below *before* they run gaim it would help to figure out whats going on. >> >> From pgress at optonline.net Thu Nov 23 05:42:43 2006 From: pgress at optonline.net (Paul Gress) Date: Wed, 22 Nov 2006 23:42:43 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564C2C9.8060204@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> Message-ID: <456526C3.4080309@optonline.net> Torrey McMahon wrote: > Aaron and others that are seeing this problem - Can you check to see if > you have the CSWgstplugins and CSWgstpluginsgood installed? If not try > to install one, run gaim, see if sound works, install the other, run > gaim, see if sound works. It might be I need to include one of those as > a dependency. Usually, the packaging system picks up such things but it > might have missed it this time due to the way gstreamer loads things up. > > OK, I was previously getting the GStreamer problem until I downgraded. I just updated my gaim to run the commands "gst-launch" and "gst-inspect", and pkginfo -l CSWgstplugins & pkginfo -l CSWgstgood. I hope it helps. See below: $ /opt/csw/bin/gst-launch ERROR: pipeline could not be constructed: empty pipeline not allowed. $ /opt/csw/bin/gst-inspect ximagesrc: ximagesrc: Ximage video source wavparse: wavparse: WAV audio demuxer wavenc: wavenc: WAV audio muxer videomixer: videomixer: Video mixer videoflip: videoflip: Video flipper videobox: videobox: Video box filter videobalance: videobalance: Video balance udp: udpsrc: UDP packet receiver udp: dynudpsink: UDP packet sender udp: multiudpsink: UDP packet sender udp: udpsink: UDP packet sender speex: speexdec: Speex audio decoder speex: speexenc: Speex audio encoder smpte: smpte: SMPTE transitions rtsp: rtpdec: RTP Decoder rtsp: rtspsrc: RTSP packet receiver rtp: rtpspeexdepay: RTP packet parser rtp: rtpspeexpay: RTP packet parser rtp: rtpmp4gpay: RTP packet parser rtp: rtpmp4vdepay: RTP packet parser rtp: rtpmp4vpay: RTP packet parser rtp: asteriskh263: RTP packet parser rtp: rtph263pay: RTP packet parser rtp: rtph263pdepay: RTP packet parser rtp: rtph263ppay: RTP packet parser rtp: rtpmpapay: RTP packet parser rtp: rtpmpadepay: RTP packet parser rtp: rtppcmapay: RTP packet parser rtp: rtppcmupay: RTP packet parser rtp: rtppcmudepay: RTP packet parser rtp: rtppcmadepay: RTP packet parser rtp: rtpamrpay: RTP packet parser rtp: rtpamrdepay: RTP packet parser rtp: rtpgsmpay: RTP GSM audio payloader rtp: rtpgsmdepay: RTP packet parser rtp: rtpdepay: RTP payloader png: pngenc: PNG image encoder png: pngdec: PNG image decoder ossaudio: osssink: Audio Sink (OSS) ossaudio: osssrc: Audio Source (OSS) ossaudio: ossmixer: OSS Mixer navigationtest: navigationtest: Video navigation test multipart: multipartmux: Multipart muxer multipart: multipartdemux: Multipart demuxer mulaw: mulawdec: Mu Law audio decoder mulaw: mulawenc: Mu Law audio encoder matroska: matroskamux: Matroska muxer matroska: matroskademux: Matroska demuxer level: level: Level jpeg: smokedec: Smoke video decoder jpeg: smokeenc: Smoke video encoder jpeg: jpegdec: JPEG image decoder jpeg: jpegenc: JPEG image encoder id3demux: id3demux: ID3 tag demuxer icydemux: icydemux: ICY tag demuxer goom: goom: GOOM: what a GOOM! gdkpixbuf: gdkpixbufscale: GdkPixbuf image scaler gdkpixbuf: gdkpixbufdec: GdkPixbuf image decoder gconfelements: gconfaudiosrc: GConf audio source gconfelements: gconfaudiosink: GConf audio sink gconfelements: gconfvideosrc: GConf video source gconfelements: gconfvideosink: GConf video sink flxdec: flxdec: FLX audio decoder flac: flacdec: FLAC audio decoder flac: flacenc: FLAC audio encoder esdsink: esdsink: Esound audio sink effectv: quarktv: QuarkTV effect effectv: revtv: RevTV effect effectv: vertigotv: VertigoTV effect effectv: shagadelictv: ShagadelicTV effectv: warptv: WarpTV effect effectv: dicetv: DiceTV effect effectv: agingtv: AgingTV effect effectv: edgetv: EdgeTV effect efence: efence: Electric Fence debug: testsink: Test plugin debug: progressreport: Progress report debug: navseek: Seek based on left-right arrows debug: breakmydata: Break my data cutter: cutter: Audio cutter cairo: cairotimeoverlay: Time overlay cairo: cairotextoverlay: Text overlay avi: avimux: Avi muxer avi: avidemux: Avi demuxer autodetect: autoaudiosink: Auto audio sink autodetect: autovideosink: Auto video sink auparse: auparse: AU audio demuxer apetag: apedemux: APE tag demuxer annodex: cmmldec: CMML stream decoder annodex: cmmlenc: CMML streams encoder alphacolor: alphacolor: Alpha color filter alpha: alpha: Alpha filter alaw: alawdec: A Law audio decoder alaw: alawenc: A Law audio encoder aasink: aasink: ASCII art video sink xvimagesink: xvimagesink: Video sink ximagesink: ximagesink: Video sink vorbis: vorbisenc: Vorbis audio encoder vorbis: vorbisdec: Vorbis audio decoder vorbis: vorbisparse: VorbisParse volume: volume: Volume videotestsrc: videotestsrc: Video test source videoscale: videoscale: Video scaler videorate: videorate: Video rate adjuster typefindfunctions: video/x-ms-asf: asf, wm, wma, wmv typefindfunctions: audio/x-musepack: mpc typefindfunctions: audio/x-au: au, snd typefindfunctions: video/x-msvideo: avi typefindfunctions: video/x-cdxa: dat typefindfunctions: video/x-vcd: dat typefindfunctions: audio/x-flac: flac typefindfunctions: video/x-fli: flc, fli typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, flac, tta typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, flac, tta typefindfunctions: application/x-apetag: ape, mpc, wv typefindfunctions: audio/x-ttafile: tta typefindfunctions: audio/x-mod: 669, amf, dsm, gdm, far, imf, it, med, mod, mtm, okt, sam, s3m, stm, stx, ult, xm typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga typefindfunctions: audio/x-ac3: ac3 typefindfunctions: video/mpeg1: mpe, mpeg, mpg typefindfunctions: video/mpeg2: mpe, mpeg, mpg typefindfunctions: video/mpegts: ts typefindfunctions: application/ogg: anx, ogg, ogm typefindfunctions: video/mpeg: mpv, mpeg, mpg typefindfunctions: video/mpeg-stream: mpv, mpeg, mpg typefindfunctions: video/mpeg4: m4v typefindfunctions: audio/x-m4a: m4a typefindfunctions: application/x-3gp: 3gp typefindfunctions: video/quicktime: mov typefindfunctions: application/vnd.rn-realmedia: ra, ram, rm, rmvb typefindfunctions: application/x-shockwave-flash: swf, swfl typefindfunctions: video/x-flv: flv typefindfunctions: text/plain: txt typefindfunctions: text/uri-list: ram typefindfunctions: application/smil: smil typefindfunctions: application/xml: xml typefindfunctions: audio/x-wav: wav typefindfunctions: audio/x-aiff: aiff, aif, aifc typefindfunctions: audio/x-svx: iff, svx typefindfunctions: audio/x-paris: paf typefindfunctions: audio/x-nist: nist typefindfunctions: audio/x-voc: voc typefindfunctions: audio/x-sds: sds typefindfunctions: audio/x-ircam: sf typefindfunctions: audio/x-w64: w64 typefindfunctions: audio/x-shorten: shn typefindfunctions: application/x-ape: ape typefindfunctions: image/jpeg: jpg, jpe, jpeg typefindfunctions: image/gif: gif typefindfunctions: image/png: png typefindfunctions: image/bmp: bmp typefindfunctions: image/tiff: tif, tiff typefindfunctions: video/x-matroska: mkv, mka typefindfunctions: video/x-dv: dv, dif typefindfunctions: audio/x-amr-nb-sh: amr typefindfunctions: audio/x-amr-wb-sh: amr typefindfunctions: audio/iLBC-sh: ilbc typefindfunctions: audio/x-sid: sid typefindfunctions: image/x-xcf: xcf typefindfunctions: video/x-mng: mng typefindfunctions: image/x-jng: jng typefindfunctions: image/x-xpixmap: xpm typefindfunctions: image/x-sun-raster: ras typefindfunctions: application/x-bzip: bz2 typefindfunctions: application/x-gzip: gz typefindfunctions: application/zip: zip typefindfunctions: application/x-compress: Z typefindfunctions: audio/x-vorbis: no extensions typefindfunctions: video/x-theora: no extensions typefindfunctions: application/x-ogm-video: no extensions typefindfunctions: application/x-ogm-audio: no extensions typefindfunctions: application/x-ogm-text: no extensions typefindfunctions: audio/x-speex: no extensions typefindfunctions: application/x-ogg-skeleton: no extensions typefindfunctions: text/x-cmml: no extensions typefindfunctions: application/x-executable: no extensions typefindfunctions: adts_mpeg_stream: aac typefindfunctions: audio/x-spc: spc typefindfunctions: audio/x-wavpack: wv, wvp typefindfunctions: audio/x-wavpack-correction: wvc typefindfunctions: application/x-rar: rar typefindfunctions: application/x-tar: tar typefindfunctions: application/x-ar: a typefindfunctions: application/x-ms-dos-executable: dll, exe, ocx, sys, scr, msstyles, cpl typefindfunctions: video/x-dirac: no extensions theora: theoradec: Theora video decoder theora: theoraenc: Theora video encoder theora: theoraparse: TheoraParse tcp: tcpclientsink: TCP client sink tcp: tcpclientsrc: TCP client source tcp: tcpserversink: TCP server sink tcp: tcpserversrc: TCP server source tcp: multifdsink: Multi filedescriptor sink subparse: subparse_typefind: srt, sub, mpsub, mdvd subparse: subparse: Subtitle parser subparse: ssaparse: SSA Subtitle Parser playbin: playbin: Player Bin pango: textoverlay: Text overlay pango: timeoverlay: Time overlay pango: clockoverlay: Clock overlay pango: textrender: Text renderer ogg: oggdemux: Ogg demuxer ogg: oggmux: Ogg muxer ogg: ogmaudioparse: OGM audio stream parser ogg: ogmvideoparse: OGM video stream parser ogg: ogmtextparse: OGM text stream parser ogg: oggparse: Ogg parser gnomevfs: gnomevfssrc: GnomeVFS Source gnomevfs: gnomevfssink: GnomeVFS Sink ffmpegcolorspace: ffmpegcolorspace: FFMPEG Colorspace converter decodebin: decodebin: Decoder Bin audiotestsrc: audiotestsrc: Audio test source audioresample: audioresample: Audio scaler audiorate: audiorate: Audio rate adjuster audioconvert: audioconvert: Audio converter adder: adder: Adder coreindexers: memindex: A index that stores entries in memory coreindexers: fileindex: A index that stores entries in file coreelements: capsfilter: CapsFilter coreelements: fakesrc: Fake Source coreelements: fakesink: Fake Sink coreelements: fdsrc: Disk Source coreelements: fdsink: Filedescriptor Sink coreelements: filesrc: File Source coreelements: identity: Identity coreelements: queue: Queue coreelements: filesink: File Sink coreelements: tee: Tee pipe fitting coreelements: typefind: TypeFind staticelements: bin: Generic bin staticelements: pipeline: Pipeline object Total count: 67 plugins, 231 features $ $ pkginfo -l CSWgstplugins PKGINST: CSWgstplugins NAME: gstplugins - GStreamer plugins handling various media types CATEGORY: application ARCH: i386 VERSION: 0.10.7 BASEDIR: / VENDOR: http://ftp.acc.umu.se/pub/GNOME/sources/gst-plugins-base packaged for CSW by Ken Mays PSTAMP: thor20060814134957 INSTDATE: Aug 20 2006 00:15 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 177 installed pathnames 39 shared pathnames 48 directories 61 executables 3525 blocks used (approx) $ pkginfo -l CSWgstpluginsgood PKGINST: CSWgstpluginsgood NAME: gstplugins_good - GStreamer Plugins (Good) CATEGORY: application ARCH: i386 VERSION: 0.10.3 BASEDIR: / VENDOR: http://ftp.gnome.org/pub/gnome/sources/gst-plugins-good packaged for CSW by Ken Mays PSTAMP: thor20060822233012 INSTDATE: Sep 10 2006 00:31 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 151 installed pathnames 38 shared pathnames 39 directories 86 executables 4092 blocks used (approx) $ From maybird1776 at yahoo.com Thu Nov 23 13:20:18 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 23 Nov 2006 04:20:18 -0800 (PST) Subject: [csw-users] More Gstreamer Plugins In-Reply-To: <4564C2C9.8060204@yahoo.com> Message-ID: <519324.15543.qm@web33608.mail.mud.yahoo.com> I've added some Gstreamer plugins for review on SPARC systems: http://www.blastwave.org/testing 289831 Nov 22 23:03 gstplugins_bad-0.10.3-SunOS5.8-sparc-CSW.pkg.gz 169748 Nov 22 23:10 gstplugins_ugly-0.10.4-SunOS5.8-sparc-CSW.pkg.gz ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From maybird1776 at yahoo.com Thu Nov 23 15:45:35 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 23 Nov 2006 06:45:35 -0800 (PST) Subject: [csw-users] Gstreamer 0.10.10, also gst-launch and gst-inspect examples In-Reply-To: <456526C3.4080309@optonline.net> Message-ID: <544442.95298.qm@web33614.mail.mud.yahoo.com> I've upgraded gstreamer to v0.10.10 in www.blastwave.org/testing. You can see the gt-launch pipelining by doing simple commands like: bash-3.1$ gst-launch oggdemux Setting pipeline to PAUSED ... Pipeline is PREROLLED ... Setting pipeline to PLAYING ... New clock: GstSystemClock bash-3.1$ gst-inspect audiotestsrc Factory Details: Long name: Audio test source Class: Source/Audio Description: Creates audio test signals of given frequency and volume Author(s): Stefan Kost Rank: none (0) Plugin Details: Name: audiotestsrc Description: Creates audio test signals of given frequency and volum Filename: /opt/csw/lib/gstreamer-0.10/libgstaudiotestsrc.so Version: 0.10.7 License: LGPL Source module: gst-plugins-base Binary package: GStreamer Base Plug-ins source release .... Have fun, Ken Mays ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From ben at benshort.co.uk Thu Nov 23 18:48:21 2006 From: ben at benshort.co.uk (ben short) Date: Thu, 23 Nov 2006 17:48:21 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start Message-ID: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> Hi, I have install postgresql from blastwave but get the following error when I try to start it up. LOG: could not bind IPv6 socket: Cannot assign requested address HINT: Is another postmaster already running on port 5432? If not, wait a few seconds and retry. LOG: database system was shut down at 2006-11-22 16:27:16 GMT LOG: checkpoint record is at 0/33F4F0 LOG: redo record is at 0/33F4F0; undo record is at 0/0; shutdown TRUE LOG: next transaction ID: 565; next OID: 10794 LOG: next MultiXactId: 1; next MultiXactOffset: 0 LOG: database system is ready LOG: transaction ID wrap limit is 2147484146, limited by database "postgres" When I look at prstat i see several postres processes running but no postmaster. All of my config files are straight out of the box. Anyone got any ideas? Ben From dclarke at blastwave.org Thu Nov 23 19:10:28 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Thu, 23 Nov 2006 13:10:28 -0500 (EST) Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> Message-ID: <1161.24.146.17.108.1164305428.squirrel@mail.blastwave.org> > Hi, > > I have install postgresql from blastwave but get the following error > when I try to start it up. > > LOG: could not bind IPv6 socket: Cannot assign requested address > HINT: Is another postmaster already running on port 5432? If not, wait > a few seconds and retry. > LOG: database system was shut down at 2006-11-22 16:27:16 GMT > LOG: checkpoint record is at 0/33F4F0 > LOG: redo record is at 0/33F4F0; undo record is at 0/0; shutdown TRUE > LOG: next transaction ID: 565; next OID: 10794 > LOG: next MultiXactId: 1; next MultiXactOffset: 0 > LOG: database system is ready > LOG: transaction ID wrap limit is 2147484146, limited by database "postgres" > > When I look at prstat i see several postres processes running but no > postmaster. > > All of my config files are straight out of the box. > > Anyone got any ideas? well hello ! *wave* I see that you fond the maillist server in record time. Good thing too. Before we begin, what OS are you running and how did you install this PostgreSQL software? With ordinary pkg-get -i postgresql ? Dennis From pgress at optonline.net Fri Nov 24 06:54:00 2006 From: pgress at optonline.net (Paul Gress) Date: Fri, 24 Nov 2006 00:54:00 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456526C3.4080309@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> Message-ID: <456688F8.2050705@optonline.net> Removed all gst* packages and installed all new gst* packages located now on http://www.blastwave.org/testing. Gaim is still getting the "GStreamer failed to inialize" error. If you require any other output, or complete output, just request it and I'll get it out. Below are all relevant outputs from "/opt/csw/bin/gaim -d": plugins: /opt/csw/lib/gaim/gevolution.so is not loadable: ld.so.1: gaim: fatal: libebook-1.2.so.3: open failed: No such file or directory plugins: /opt/csw/lib/gaim/libsametime.so has a prefs_info, but is a prpl. This is no longer supported. sound: Initializing sound output drivers. pounce: Error reading pounces: Failed to open file '/home/Paul/.gaim/pounces.xml': No such file or directory gtkspell: Failed to setup GtkSpell: aspell: No word lists can be found for the language "en_US". Below is some other output: $ /opt/csw/bin/gst-launch oggdemux Setting pipeline to PAUSED ... Pipeline is PREROLLED ... Setting pipeline to PLAYING ... New clock: GstSystemClock ......... $ /opt/csw/bin/gst-inspect audiotestsrc Factory Details: Long name: Audio test source Class: Source/Audio Description: Creates audio test signals of given frequency and volume Author(s): Stefan Kost Rank: none (0) Plugin Details: Name: audiotestsrc Description: Creates audio test signals of given frequency and volume Filename: /opt/csw/lib/gstreamer-0.10/libgstaudiotestsrc.so Version: 0.10.7 License: LGPL Source module: gst-plugins-base Binary package: GStreamer Base Plug-ins source release Origin URL: Unknown package origin ......... $ pkginfo -l CSWgstreamer PKGINST: CSWgstreamer NAME: gstreamer - The open-source multimedia framework CATEGORY: application ARCH: i386 VERSION: 0.10.10 BASEDIR: / VENDOR: http://gstreamer.freedesktop.org/src/gstreamer packaged for CSW by Ken Mays PSTAMP: thor20061123093319 INSTDATE: Nov 23 2006 11:49 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 192 installed pathnames 54 shared pathnames 59 directories 19 executables 5859 blocks used (approx) $ pkginfo -l CSWgstplugins PKGINST: CSWgstplugins NAME: gstplugins - GStreamer plugins handling various media types CATEGORY: application ARCH: i386 VERSION: 0.10.7 BASEDIR: / VENDOR: http://ftp.acc.umu.se/pub/GNOME/sources/gst-plugins-base packaged for CSW by Ken Mays PSTAMP: thor20060814134957 INSTDATE: Aug 20 2006 00:15 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 177 installed pathnames 39 shared pathnames 48 directories 61 executables 3525 blocks used (approx) $ pkginfo -l CSWgstpluginsbad PKGINST: CSWgstpluginsbad NAME: gstplugins_bad - GStreamer Plugins (Bad) CATEGORY: application ARCH: i386 VERSION: 0.10.3 BASEDIR: / VENDOR: http://gstreamer.freedesktop.org/src/gst-plugins-bad packaged for CSW by Ken Mays PSTAMP: thor20061123102715 INSTDATE: Nov 23 2006 11:52 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 70 installed pathnames 34 shared pathnames 35 directories 11 executables 1034 blocks used (approx) $ pkginfo -l CSWgstpluginsgood PKGINST: CSWgstpluginsgood NAME: gstplugins_good - GStreamer Plugins (Good) CATEGORY: application ARCH: i386 VERSION: 0.10.3 BASEDIR: / VENDOR: http://ftp.gnome.org/pub/gnome/sources/gst-plugins-good packaged for CSW by Ken Mays PSTAMP: thor20060822233012 INSTDATE: Sep 10 2006 00:31 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 151 installed pathnames 38 shared pathnames 39 directories 86 executables 4092 blocks used (approx) $ pkginfo -l CSWgstpluginsugly PKGINST: CSWgstpluginsugly NAME: gstplugins_ugly - GStreamer Plugins (Ugly) CATEGORY: application ARCH: i386 VERSION: 0.10.4 BASEDIR: / VENDOR: http://gstreamer.freedesktop.org/src/gst-plugins-ugly packaged for CSW by Ken Mays PSTAMP: thor20061123101515 INSTDATE: Nov 23 2006 11:49 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 67 installed pathnames 34 shared pathnames 35 directories 9 executables 1136 blocks used (approx) From ben at benshort.co.uk Fri Nov 24 10:15:06 2006 From: ben at benshort.co.uk (ben short) Date: Fri, 24 Nov 2006 09:15:06 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <1161.24.146.17.108.1164305428.squirrel@mail.blastwave.org> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> <1161.24.146.17.108.1164305428.squirrel@mail.blastwave.org> Message-ID: <86aa493a0611240115j1ef55cb8g40c6cbe735006e24@mail.gmail.com> Hi Dennis, Heres the output from uname -a SunOS arachne 5.10 Generic_Patch_118844-30 i86pc i386 i86pc I install postgreSQL using pkg-get -i postgresql. Ben On 11/23/06, Dennis Clarke wrote: > > > Hi, > > > > I have install postgresql from blastwave but get the following error > > when I try to start it up. > > > > LOG: could not bind IPv6 socket: Cannot assign requested address > > HINT: Is another postmaster already running on port 5432? If not, wait > > a few seconds and retry. > > LOG: database system was shut down at 2006-11-22 16:27:16 GMT > > LOG: checkpoint record is at 0/33F4F0 > > LOG: redo record is at 0/33F4F0; undo record is at 0/0; shutdown TRUE > > LOG: next transaction ID: 565; next OID: 10794 > > LOG: next MultiXactId: 1; next MultiXactOffset: 0 > > LOG: database system is ready > > LOG: transaction ID wrap limit is 2147484146, limited by database "postgres" > > > > When I look at prstat i see several postres processes running but no > > postmaster. > > > > All of my config files are straight out of the box. > > > > Anyone got any ideas? > > well hello ! > > *wave* > > I see that you fond the maillist server in record time. Good thing too. > > Before we begin, what OS are you running and how did you install this > PostgreSQL software? With ordinary pkg-get -i postgresql ? > > Dennis > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From james at blastwave.org Fri Nov 24 11:05:34 2006 From: james at blastwave.org (James Lee) Date: Fri, 24 Nov 2006 10:05:34 GMT Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> Message-ID: <20061124.10053400.2563513534@gyor.asd.demon.co.uk> On 23/11/06, 17:48:21, ben short wrote regarding [csw-users] PostgreSQL 8.1.4 - Cant start: > I have install postgresql from blastwave but get the following error > when I try to start it up. > LOG: could not bind IPv6 socket: Cannot assign requested address > HINT: Is another postmaster already running on port 5432? If not, wait > a few seconds and retry. I too see this in the log, doesn't say it's error. Is it because we don't have Ipv6 enabled? If so it's nothing to worry about. > When I look at prstat i see several postres processes running but no > postmaster. Check for postmaster with ps not prstat, in prstat the processes show as: $ prstat -c -u postgres PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 16820 postgres 21M 15M sleep 41 0 0:00.00 0.3% postgres/1 15771 postgres 21M 15M sleep 58 0 0:00.11 0.0% postgres/1 13356 postgres 21M 15M sleep 58 0 0:00.00 0.0% postgres/1 290 postgres 20M 14M sleep 48 0 0:00.20 0.0% postgres/1 13587 postgres 21M 14M sleep 48 0 0:00.00 0.0% postgres/1 16768 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 16662 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 13588 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 327 postgres 8568K 2016K sleep 58 0 0:00.00 0.0% postgres/1 326 postgres 9424K 2784K sleep 58 0 0:00.01 0.0% postgres/1 325 postgres 20M 12M sleep 59 0 0:00.17 0.0% postgres/1 Total: 11 processes, 11 lwps, load averages: 0.30, 0.14, 0.14 but as postmaster with ps: $ ps -u postgres -f UID PID PPID C STIME TTY TIME CMD postgres 325 290 0 Nov 17 ? 0:17 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 326 290 0 Nov 17 ? 0:01 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 290 1 0 Nov 17 ? 0:21 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 327 326 0 Nov 17 ? 0:01 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 13356 290 0 13:20:34 ? 0:01 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 13588 290 0 14:41:46 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 15771 290 0 02:21:24 ? 0:11 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 16662 290 0 08:24:15 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 16768 290 0 09:26:52 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 13587 290 0 14:41:46 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 16820 290 0 09:53:22 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata or with "pgrep -f postmaster". As you have postgres processes running I think it has started. > All of my config files are straight out of the box. > Anyone got any ideas? Random hints, refer to: /opt/csw/postgresql/share/doc/README-CSW.txt In particular: + Check the shared memory settings. + Did you do "/etc/init.d/cswpostgres init" ? From ben at benshort.co.uk Fri Nov 24 11:13:51 2006 From: ben at benshort.co.uk (ben short) Date: Fri, 24 Nov 2006 10:13:51 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <20061124.10053400.2563513534@gyor.asd.demon.co.uk> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> <20061124.10053400.2563513534@gyor.asd.demon.co.uk> Message-ID: <86aa493a0611240213u45ecf8b2r735b0ae6c1d9b4e@mail.gmail.com> James, Ah yes I can see the postmaster deamons when I do ps -u postgres -f. Many thanks. Ben On 11/24/06, James Lee wrote: > On 23/11/06, 17:48:21, ben short wrote regarding > [csw-users] PostgreSQL 8.1.4 - Cant start: > > > I have install postgresql from blastwave but get the following error > > when I try to start it up. > > > LOG: could not bind IPv6 socket: Cannot assign requested address > > HINT: Is another postmaster already running on port 5432? If not, wait > > a few seconds and retry. > > I too see this in the log, doesn't say it's error. Is it because we > don't have Ipv6 enabled? If so it's nothing to worry about. > > > > > When I look at prstat i see several postres processes running but no > > postmaster. > > Check for postmaster with ps not prstat, in prstat the processes show as: > > $ prstat -c -u postgres > PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP > > 16820 postgres 21M 15M sleep 41 0 0:00.00 0.3% postgres/1 > 15771 postgres 21M 15M sleep 58 0 0:00.11 0.0% postgres/1 > 13356 postgres 21M 15M sleep 58 0 0:00.00 0.0% postgres/1 > 290 postgres 20M 14M sleep 48 0 0:00.20 0.0% postgres/1 > 13587 postgres 21M 14M sleep 48 0 0:00.00 0.0% postgres/1 > 16768 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > 16662 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > 13588 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > 327 postgres 8568K 2016K sleep 58 0 0:00.00 0.0% postgres/1 > 326 postgres 9424K 2784K sleep 58 0 0:00.01 0.0% postgres/1 > 325 postgres 20M 12M sleep 59 0 0:00.17 0.0% postgres/1 > Total: 11 processes, 11 lwps, load averages: 0.30, 0.14, 0.14 > > > but as postmaster with ps: > > > $ ps -u postgres -f > UID PID PPID C STIME TTY TIME CMD > postgres 325 290 0 Nov 17 ? 0:17 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 326 290 0 Nov 17 ? 0:01 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 290 1 0 Nov 17 ? 0:21 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 327 326 0 Nov 17 ? 0:01 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 13356 290 0 13:20:34 ? 0:01 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 13588 290 0 14:41:46 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 15771 290 0 02:21:24 ? 0:11 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 16662 290 0 08:24:15 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 16768 290 0 09:26:52 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 13587 290 0 14:41:46 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 16820 290 0 09:53:22 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > > or with "pgrep -f postmaster". As you have postgres processes running I > think it has started. > > > > > > > All of my config files are straight out of the box. > > > Anyone got any ideas? > > > Random hints, refer to: > /opt/csw/postgresql/share/doc/README-CSW.txt > > In particular: > + Check the shared memory settings. > + Did you do "/etc/init.d/cswpostgres init" ? > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From ben at benshort.co.uk Fri Nov 24 12:03:18 2006 From: ben at benshort.co.uk (ben short) Date: Fri, 24 Nov 2006 11:03:18 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <86aa493a0611240213u45ecf8b2r735b0ae6c1d9b4e@mail.gmail.com> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> <20061124.10053400.2563513534@gyor.asd.demon.co.uk> <86aa493a0611240213u45ecf8b2r735b0ae6c1d9b4e@mail.gmail.com> Message-ID: <86aa493a0611240303xb066d29ib9a4ddebf50b9c1f@mail.gmail.com> Hello again, I am able to connect to the db from the machine via pgsql and have set the postgres users password. I am connecting to the machine via putty and have forwarded local port 5432 to localhost:5432, but I can seem to connect with pgAdmin. Do i need to edit the pg_hdb.conf from its default setup? Ben On 11/24/06, ben short wrote: > James, > > Ah yes I can see the postmaster deamons when I do ps -u postgres -f. > > Many thanks. > > Ben > > > On 11/24/06, James Lee wrote: > > On 23/11/06, 17:48:21, ben short wrote regarding > > [csw-users] PostgreSQL 8.1.4 - Cant start: > > > > > I have install postgresql from blastwave but get the following error > > > when I try to start it up. > > > > > LOG: could not bind IPv6 socket: Cannot assign requested address > > > HINT: Is another postmaster already running on port 5432? If not, wait > > > a few seconds and retry. > > > > I too see this in the log, doesn't say it's error. Is it because we > > don't have Ipv6 enabled? If so it's nothing to worry about. > > > > > > > > > When I look at prstat i see several postres processes running but no > > > postmaster. > > > > Check for postmaster with ps not prstat, in prstat the processes show as: > > > > $ prstat -c -u postgres > > PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP > > > > 16820 postgres 21M 15M sleep 41 0 0:00.00 0.3% postgres/1 > > 15771 postgres 21M 15M sleep 58 0 0:00.11 0.0% postgres/1 > > 13356 postgres 21M 15M sleep 58 0 0:00.00 0.0% postgres/1 > > 290 postgres 20M 14M sleep 48 0 0:00.20 0.0% postgres/1 > > 13587 postgres 21M 14M sleep 48 0 0:00.00 0.0% postgres/1 > > 16768 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > > 16662 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > > 13588 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > > 327 postgres 8568K 2016K sleep 58 0 0:00.00 0.0% postgres/1 > > 326 postgres 9424K 2784K sleep 58 0 0:00.01 0.0% postgres/1 > > 325 postgres 20M 12M sleep 59 0 0:00.17 0.0% postgres/1 > > Total: 11 processes, 11 lwps, load averages: 0.30, 0.14, 0.14 > > > > > > but as postmaster with ps: > > > > > > $ ps -u postgres -f > > UID PID PPID C STIME TTY TIME CMD > > postgres 325 290 0 Nov 17 ? 0:17 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 326 290 0 Nov 17 ? 0:01 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 290 1 0 Nov 17 ? 0:21 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 327 326 0 Nov 17 ? 0:01 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 13356 290 0 13:20:34 ? 0:01 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 13588 290 0 14:41:46 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 15771 290 0 02:21:24 ? 0:11 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 16662 290 0 08:24:15 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 16768 290 0 09:26:52 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 13587 290 0 14:41:46 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 16820 290 0 09:53:22 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > > > > > or with "pgrep -f postmaster". As you have postgres processes running I > > think it has started. > > > > > > > > > > > > > All of my config files are straight out of the box. > > > > > Anyone got any ideas? > > > > > > Random hints, refer to: > > /opt/csw/postgresql/share/doc/README-CSW.txt > > > > In particular: > > + Check the shared memory settings. > > + Did you do "/etc/init.d/cswpostgres init" ? > > _______________________________________________ > > users mailing list > > users at lists.blastwave.org > > https://lists.blastwave.org/mailman/listinfo/users > > > From ghenry at cmi.univ-mrs.fr Fri Nov 24 14:47:50 2006 From: ghenry at cmi.univ-mrs.fr (Gerard Henry) Date: Fri, 24 Nov 2006 14:47:50 +0100 Subject: [csw-users] installing packages in global zone, not in local? Message-ID: <4566F806.2040707@cmi.univ-mrs.fr> hello all, i have several zones on a machine. In global zone, when i install a package, it is installed in others zones is there a switch as: pkg-get -G -i evince to install it in one zone? thanks in advance gerard From asyd at asyd.net Fri Nov 24 17:16:35 2006 From: asyd at asyd.net (Bruno Bonfils) Date: Fri, 24 Nov 2006 17:16:35 +0100 Subject: [csw-users] installing packages in global zone, not in local? In-Reply-To: <4566F806.2040707@cmi.univ-mrs.fr> References: <4566F806.2040707@cmi.univ-mrs.fr> Message-ID: <20061124161635.GA7286@kaoru> On ven 24 novembre, G?rard Henry wrote: > hello all, > > i have several zones on a machine. In global zone, when i install a > package, it is installed in others zones > is there a switch as: > pkg-get -G -i evince > to install it in one zone? > > thanks in advance >From man pkgadd : -G Add package(s) in the current zone only. When used in the global zone, the package is added to the global zone only and is not propagated to any existing or yet-to-be- created non-global zone. When used in a non-global zone, the package(s) are added to the non-global zone only. % grep pkgadd /opt/csw/bin/pkg-get [..] pkgadd $PKGADDFLAGS$PKGASK -d $tmpdir $tmppkg [..] % grep PKGADDFLAGS /opt/csw/etc/pkg-get.conf #PKGADDFLAGS=-G # Solaris 10: If you wish to limit pkg-get to installing packages # ONLY to the global zone, then uncomment this line #PKGADDFLAGS=-G Best regards. -- http://asyd.net/home/ - Home Page http://guses.org/home/ - French Speaking (Open)Solaris User Group From dclarke at blastwave.org Fri Nov 24 17:29:55 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Fri, 24 Nov 2006 11:29:55 -0500 (EST) Subject: [csw-users] installing packages in global zone, not in local? In-Reply-To: <20061124161635.GA7286@kaoru> References: <4566F806.2040707@cmi.univ-mrs.fr> <20061124161635.GA7286@kaoru> Message-ID: <45688.24.146.17.108.1164385795.squirrel@mail.blastwave.org> > On ven 24 novembre, G?rard Henry wrote: >> hello all, >> >> i have several zones on a machine. In global zone, when i install a >> package, it is installed in others zones >> is there a switch as: >> pkg-get -G -i evince >> to install it in one zone? I think the answer you are looking for here is : zlogin -C -e\@ zonename then once in that zone and that zone only ! /opt/csw/bin/pkg-get -U /opt/csw/bin/pkg-get -i foo keep in mind that if you want separate package revisions in separate zones then you should not be sharing /opt/csw across all your zones. Make that zones filesystems specific to itself and you will be fine. Dennis From tmcmahon2 at yahoo.com Fri Nov 24 17:52:06 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Fri, 24 Nov 2006 11:52:06 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456688F8.2050705@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> Message-ID: <45672336.4050003@yahoo.com> Paul Gress wrote: > Removed all gst* packages and installed all new gst* packages located > now on http://www.blastwave.org/testing. Gaim is still getting the > "GStreamer failed to inialize" error. > > If you require any other output, or complete output, just request it and > I'll get it out. Apologies that I'm still beating my head on this one but I'm still not near a Solaris box. Can you make sure that the preferences have Automatic set for the gstreamer setting and what does the output of "gstreamer-properties" give you? Ken - Is sound broken for you still? I'm trying to narrow this down so if anyone does have gaim and sounds working just fine please let me know. From pgress at optonline.net Fri Nov 24 19:04:24 2006 From: pgress at optonline.net (Paul Gress) Date: Fri, 24 Nov 2006 13:04:24 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45672336.4050003@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <45672336.4050003@yahoo.com> Message-ID: <45673428.3020802@optonline.net> Torrey McMahon wrote: > Apologies that I'm still beating my head on this one but I'm still not > near a Solaris box. Can you make sure that the preferences have > Automatic set for the gstreamer setting and what does the output of > "gstreamer-properties" give you? > > Ken - Is sound broken for you still? > > I'm trying to narrow this down so if anyone does have gaim and sounds > working just fine please let me know. > _______________________________________________ > OK, ran "gstreamer-properties". Here the output: $ /opt/csw/bin/gstreamer-properties gstreamer-properties-Message: Skipping unavailable plugin 'alsasink' gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink' gstreamer-properties-Message: Skipping unavailable plugin 'polypsink' gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink' gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc' gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc' OIL: ERROR liboiltest.c 403: (): function conv_s16_f32_rintf in class conv_s16_f32 failed check (691297 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_s32_f32_rintf in class conv_s32_f32 failed check (5.62756e+10 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_s8_f32_rintf in class conv_s8_f32 failed check (2862 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_u16_f32_rintf in class conv_u16_f32 failed check (1.76926e+06 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_u32_f32_rintf in class conv_u32_f32 failed check (1.04611e+11 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_u8_f32_rintf in class conv_u8_f32 failed check (6451 > 0.1) || (outside=0) gstreamer-properties-Message: Skipping unavailable plugin 'v4lsrc' gstreamer-properties-Message: Skipping unavailable plugin 'v4l2src' gstreamer-properties-Message: Skipping unavailable plugin 'alsasrc' gstreamer-properties-Message: Skipping unavailable plugin 'esdmon' gstreamer-properties-Message: Skipping unavailable plugin 'polypsrc' $ "gstreamer-properties" popped up a menu. It was set to custom. After I set it to ESD I could get a test sound. Still getting the same error with gaim and no sound. -------------- next part -------------- A non-text attachment was scrubbed... Name: snapshot1.jpg Type: image/jpeg Size: 26444 bytes Desc: not available Url : http://lists.blastwave.org/pipermail/users/attachments/20061124/f611a7fd/attachment.jpg From maybird1776 at yahoo.com Fri Nov 24 19:29:04 2006 From: maybird1776 at yahoo.com (ken mays) Date: Fri, 24 Nov 2006 10:29:04 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <45672336.4050003@yahoo.com> Message-ID: <538796.87079.qm@web33608.mail.mud.yahoo.com> You can fix the code in gst/gstsound.c that initializes gstreamer. Read: http://gstreamer.freedesktop.org/data/doc/gstreamer/stable/manual/html/chapter-init.html ------------- old code -------------- #ifdef USE_GSTREAMER gaim_debug_info("sound", "Initializing sound output drivers.\n"); if ((gst_init_failed = !gst_init_check(NULL, NULL, &error))) { gaim_notify_error(NULL, _("GStreamer Failure"), _("GStreamer failed to initialize."), error ? error->message : ""); if (error) { g_error_free(error); error = NULL; } } #endif /* USE_GSTREAMER */ ------------------------------------------------ The best way, IMHO, is to check for the gst/gst.h file first to include in the code. Then, a basic gst_init(argc,argv) call should work as for the else clause. I see that GAIM checks for the initialization of gstreamer but does nothing to fix the situation - just notifies the user of the issue. Seems like a coding bug here. ~ Ken ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From maybird1776 at yahoo.com Fri Nov 24 19:38:26 2006 From: maybird1776 at yahoo.com (ken mays) Date: Fri, 24 Nov 2006 10:38:26 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <45672336.4050003@yahoo.com> Message-ID: <222955.1510.qm@web33604.mail.mud.yahoo.com> There can possible be a setup issue as GAIM is trying to have Gstreamer playback *.wav files for various conditions.... ~K ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com From tmcmahon2 at yahoo.com Sat Nov 25 03:58:54 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Fri, 24 Nov 2006 21:58:54 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45673428.3020802@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <45672336.4050003@yahoo.com> <45673428.3020802@optonline.net> Message-ID: <4567B16E.90300@yahoo.com> Paul Gress wrote: > Torrey McMahon wrote: >> Apologies that I'm still beating my head on this one but I'm still >> not near a Solaris box. Can you make sure that the preferences have >> Automatic set for the gstreamer setting and what does the output of >> "gstreamer-properties" give you? >> >> Ken - Is sound broken for you still? >> [SNIP] > > > "gstreamer-properties" popped up a menu. It was set to custom. After > I set it to ESD I could get a test sound. Still getting the same > error with gaim and no sound. I would think the default output would be "Automatic". I'm not a gstreamer expert though so ... Ken? From ghenry at cmi.univ-mrs.fr Mon Nov 27 13:20:04 2006 From: ghenry at cmi.univ-mrs.fr (=?ISO-8859-1?Q?G=E9rard_Henry?=) Date: Mon, 27 Nov 2006 13:20:04 +0100 Subject: [csw-users] trouble with postfix installation Message-ID: <456AD7F4.9@cmi.univ-mrs.fr> hello all, i installed postfix on solaris 10 x86, and it's okay (modulo a minimal trouble, see http://www.blastwave.org/mantis/view_bug_page.php?f_id=1943). Now, i'm installing it on sparc machine, again solaris 10, and during installation, i got this strane messages: ... ERROR: attribute verification of failed group name not found in group table(s) ... ERROR: attribute verification of failed group name not found in group table(s) ... At the beginning of installation, pkg-get said: The following files are already installed on the system and are being used by another package: /etc /etc/init.d * /opt/csw/var/spool * - conflict with a file which does not belong to any package. Do you want to install these conflicting files [y,n,?,q] n PS: postdrop is well created in /etc/group mombasa-root% /etc/init.d/cswpostfix check postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/var/spool/postfix/public postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/var/spool/postfix/maildrop postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/sbin/postqueue postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/sbin/postdrop And this happen on a nis client client. Doing the same install install on a non-nis machine, everything go well. I verified that group id aren'nt used in NIS table. Anybody else using postfix from blastwave? gerard From tmcmahon2 at yahoo.com Mon Nov 27 23:03:15 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Mon, 27 Nov 2006 17:03:15 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456688F8.2050705@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> Message-ID: <456B60A3.5050903@yahoo.com> Paul Gress wrote: > Removed all gst* packages and installed all new gst* packages located > now on http://www.blastwave.org/testing. Gaim is still getting the > "GStreamer failed to inialize" error. > > If you require any other output, or complete output, just request it and > I'll get it out. I pinged some of the gaim crew and they said this seems to be happening with a lot of people. Could you try setting the GST_REGISTRY_FORK environment variable to "no" and rerunning gaim -d? From pgress at optonline.net Tue Nov 28 07:19:14 2006 From: pgress at optonline.net (Paul Gress) Date: Tue, 28 Nov 2006 01:19:14 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456B60A3.5050903@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <456B60A3.5050903@yahoo.com> Message-ID: <456BD4E2.2080807@optonline.net> Torrey McMahon wrote: > Paul Gress wrote: > >> Removed all gst* packages and installed all new gst* packages located >> now on http://www.blastwave.org/testing. Gaim is still getting the >> "GStreamer failed to inialize" error. >> >> If you require any other output, or complete output, just request it and >> I'll get it out. >> > > I pinged some of the gaim crew and they said this seems to be happening > with a lot of people. Could you try setting the GST_REGISTRY_FORK > environment variable to "no" and rerunning gaim -d? > OK, That worked. No GStreamer failed to initialize" error, and sound works, though it's still set on ESD for sound. So, I'll just set up a wrapper script to set GST_REGESTRY_FORK=no. Below is the full output of gaim -d. Thanks, Paul $ GST_REGISTRY_FORK=no $ export GST_REGISTRY_FORK $ echo $GST_REGISTRY_FORK no $ /opt/csw/bin/gaim -d plugins: probing /opt/csw/lib/gaim/extplacement.so plugins: probing /opt/csw/lib/gaim/gaimrc.so plugins: probing /opt/csw/lib/gaim/gestures.so plugins: probing /opt/csw/lib/gaim/gevolution.so plugins: /opt/csw/lib/gaim/gevolution.so is not loadable: ld.so.1: gaim: fatal: libebook-1.2.so.3: open failed: No such file or directory plugins: probing /opt/csw/lib/gaim/history.so plugins: probing /opt/csw/lib/gaim/iconaway.so plugins: probing /opt/csw/lib/gaim/idle.so plugins: probing /opt/csw/lib/gaim/libgg.so plugins: probing /opt/csw/lib/gaim/libirc.so plugins: probing /opt/csw/lib/gaim/libjabber.so plugins: probing /opt/csw/lib/gaim/libmsn.so plugins: probing /opt/csw/lib/gaim/libnovell.so plugins: probing /opt/csw/lib/gaim/liboscar.so plugins: probing /opt/csw/lib/gaim/libqq.so plugins: probing /opt/csw/lib/gaim/libsametime.so plugins: /opt/csw/lib/gaim/libsametime.so has a prefs_info, but is a prpl. This is no longer supported. plugins: probing /opt/csw/lib/gaim/libsimple.so plugins: probing /opt/csw/lib/gaim/libyahoo.so plugins: probing /opt/csw/lib/gaim/libzephyr.so plugins: probing /opt/csw/lib/gaim/log_reader.so plugins: probing /opt/csw/lib/gaim/notify.so plugins: probing /opt/csw/lib/gaim/psychic.so plugins: probing /opt/csw/lib/gaim/relnot.so plugins: probing /opt/csw/lib/gaim/spellchk.so plugins: probing /opt/csw/lib/gaim/ssl-gnutls.so plugins: probing /opt/csw/lib/gaim/ssl-nss.so plugins: probing /opt/csw/lib/gaim/ssl.so plugins: probing /opt/csw/lib/gaim/statenotify.so plugins: probing /opt/csw/lib/gaim/tcl.so plugins: probing /opt/csw/lib/gaim/ticker.so plugins: probing /opt/csw/lib/gaim/timestamp.so plugins: probing /opt/csw/lib/gaim/timestamp_format.so util: Reading file accounts.xml from directory /home/Paul/.gaim util: Reading file status.xml from directory /home/Paul/.gaim stun: using server stun: using server sound: Initializing sound output drivers. util: Reading file blist.xml from directory /home/Paul/.gaim prefs: Reading /home/Paul/.gaim/prefs.xml prefs: Finished reading /home/Paul/.gaim/prefs.xml pounce: Error reading pounces: Failed to open file '/home/Paul/.gaim/pounces.xml': No such file or directory Session Management: ICE initialized. Session Management: Connecting with no previous ID Session Management: Handling new ICE connection... done. Session Management: Connected to manager (GnomeSM) with client ID 11c0a80067000116469461100000007890015 Session Management: Using /opt/csw/bin/gaim as command gtkspell: Failed to setup GtkSpell: aspell: No word lists can be found for the language "en_US". account: Connecting to account radical 1won connection: Connecting. gc = 85b2188 oscar: registered module misc (family 0xffff, version = 0x0000, tool 0x0000, tool version 0x0000) oscar: registered module oservice (family 0x0001, version = 0x0003, tool 0x0110, tool version 0x0629) oscar: registered module locate (family 0x0002, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module buddy (family 0x0003, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module messaging (family 0x0004, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module advert (family 0x0005, version = 0x0001, tool 0x0001, tool version 0x0001) oscar: registered module invite (family 0x0006, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module admin (family 0x0007, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module popup (family 0x0008, version = 0x0001, tool 0x0104, tool version 0x0001) oscar: registered module bos (family 0x0009, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module userlookup (family 0x000a, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module stats (family 0x000b, version = 0x0001, tool 0x0104, tool version 0x0001) oscar: registered module translate (family 0x000c, version = 0x0001, tool 0x0104, tool version 0x0001) oscar: registered module chatnav (family 0x000d, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module chat (family 0x000e, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module odir (family 0x000f, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module bart (family 0x0010, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module feedbag (family 0x0013, version = 0x0004, tool 0x0110, tool version 0x0629) oscar: registered module icq (family 0x0015, version = 0x0001, tool 0x0110, tool version 0x047c) oscar: registered module auth (family 0x0017, version = 0x0000, tool 0x0000, tool version 0x0000) oscar: registered module alert (family 0x0018, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: Adding handler for ffff/0003 oscar: Adding handler for ffff/0006 oscar: Adding handler for 0007/0003 oscar: Adding handler for 0007/0005 oscar: Adding handler for 0007/0007 oscar: Adding handler for 0018/0001 oscar: Adding handler for 0018/0007 oscar: Adding handler for 0017/0003 oscar: Adding handler for 0017/0007 oscar: Adding handler for 0017/000a oscar: Adding handler for 0010/0001 oscar: Adding handler for 0010/0005 oscar: Adding handler for 0009/0001 oscar: Adding handler for 0009/0003 oscar: Adding handler for 0003/0001 oscar: Adding handler for 0003/0003 oscar: Adding handler for 0003/000b oscar: Adding handler for 0003/000c oscar: Adding handler for 000e/0001 oscar: Adding handler for 000e/0003 oscar: Adding handler for 000e/0004 oscar: Adding handler for 000e/0002 oscar: Adding handler for 000e/0006 oscar: Adding handler for 000d/0001 oscar: Adding handler for 000d/0009 oscar: Adding handler for 0013/0001 oscar: Adding handler for 0013/0003 oscar: Adding handler for 0013/0006 oscar: Adding handler for 0013/000e oscar: Adding handler for 0013/0008 oscar: Adding handler for 0013/0015 oscar: Adding handler for 0013/0019 oscar: Adding handler for 0013/001b oscar: Adding handler for 0013/001c oscar: Adding handler for 0004/0005 oscar: Adding handler for 0004/0007 oscar: Adding handler for 0004/000a oscar: Adding handler for 0004/000b oscar: Adding handler for 0004/0001 oscar: Adding handler for 0004/0014 oscar: Adding handler for 0004/000c oscar: Adding handler for 0015/00f0 oscar: Adding handler for 0015/00f1 oscar: Adding handler for 0015/00f3 oscar: Adding handler for 0015/00f2 oscar: Adding handler for 0002/0003 oscar: Adding handler for 0002/0006 oscar: Adding handler for 0002/0001 oscar: Adding handler for 0002/fffd oscar: Adding handler for 0001/0001 oscar: Adding handler for 0001/000f oscar: Adding handler for 0001/001f oscar: Adding handler for 0001/0021 oscar: Adding handler for 0001/000a oscar: Adding handler for 0001/0005 oscar: Adding handler for 0001/0013 oscar: Adding handler for 0001/0010 oscar: Adding handler for 0008/0002 oscar: Adding handler for 000a/0001 oscar: Adding handler for 000a/0003 oscar: oscar_login: gc = 85b2188 util: requested to fetch (http://192.168.0.1:49152/gatedesc.xml), full=1, user_agent=((null)), http11=1 Session Management: Received first save_yourself dnsquery: IP resolved for login.oscar.aol.com proxy: Attempting connection to 64.12.200.89 proxy: Connecting to login.oscar.aol.com:5190 with no proxy proxy: Connection in progress Session Management: Received save_complete dnsquery: IP resolved for 192.168.0.1 proxy: Attempting connection to 192.168.0.1 proxy: Connecting to 192.168.0.1:49152 with no proxy proxy: Connection in progress proxy: Connected. util: Request: 'GET /gatedesc.xml HTTP/1.1 Connection: close Host: 192.168.0.1:49152 ' util: Response headers: 'HTTP/1.1 200 OK CONTENT-LENGTH: 3424 CONTENT-TYPE: text/xml DATE: Tue, 28 Nov 2006 06:17:17 GMT LAST-MODIFIED: Sat, 01 Jan 2000 00:00:07 GMT SERVER: Linux/2.4.26-uc0, UPnP/1.0, Intel SDK for UPnP devices /1.2 CONNECTION: close ' util: parsed 3424 proxy: Connected. oscar: connected to FLAP server of type 0x0017 oscar: Screen name sent, waiting for response util: requested to fetch (http://192.168.0.1:49152/upnp/control/WANIPConn1), full=0, user_agent=((null)), http11=1 dnsquery: IP resolved for 192.168.0.1 proxy: Attempting connection to 192.168.0.1 proxy: Connecting to 192.168.0.1:49152 with no proxy proxy: Connection in progress dnsquery: IP resolved for 192.168.0.1 proxy: Attempting connection to 192.168.0.1 proxy: Connecting to 192.168.0.1:49152 with no proxy proxy: Connection in progress proxy: Connected. util: Request: 'POST /upnp/control/WANIPConn1 HTTP/1.1 HOST: 192.168.0.1:49152 SOAPACTION: "urn:schemas-upnp-org:service:WANIPConnection:1#GetExternalIPAddress" CONTENT-TYPE: text/xml ; charset="utf-8" CONTENT-LENGTH: 310 ' proxy: Connected. upnp: Local IP: 192.168.0.103 oscar: inside auth_resp (Screen name: radical 1won) oscar: Reg status: 3 oscar: E-mail: radical1won at netscape.net oscar: BOSIP: 205.188.10.186:5190 oscar: Closing auth connection... oscar: Scheduling destruction of FLAP connection of type 0x0017 oscar: Destroying oscar connection of type 0x0017 dnsquery: IP resolved for 205.188.10.186 proxy: Attempting connection to 205.188.10.186 proxy: Connecting to 205.188.10.186:5190 with no proxy proxy: Connection in progress proxy: Connected. oscar: connected to FLAP server of type 0x0002 oscar: MOTD: Unknown (5) oscar: FLAP connection of type 0x0002 is now fully connected oscar: ssi: requesting rights and list oscar: locate rights: max sig len = 4096 oscar: buddy list rights: Max buddies = 1000 / Max watchers = 2000 oscar: BOS rights: Max permit = 1000 / Max deny = 1000 buddyicon: Wrote file /home/Paul/.gaim/icons/91a512b0 buddyicon: Uncached file 511b332d buddyicon: Wrote file /home/Paul/.gaim/icons/b5688394 buddyicon: Uncached file c06d1808 connection: Activating keepalive. oscar: buddy list loaded oscar: ssi rights: max type 0x0000=3000, max type 0x0001=61, max type 0x0002=1000, max type 0x0003=1000, max type 0x0004=1, max type 0x0005=1, max type 0x0006=150, max type 0x0007=12, max type 0x0008=12, max type 0x0009=3, max type 0x000a=50, max type 0x000b=50, max type 0x000c=0, max type 0x000d=0, max type 0x000e=0, max type 0x000f=0, max type 0x0010=0, max type 0x0011=1, max type 0x0012=0, max type 0x0013=0, max type 0x0014=15, max type 0x0015=1, max type 0x0016=40, max type 0x0017=1, max type 0x0018=10, max type 0x0019=200, max type 0x001a=1, max type 0x001b=0, max type 0x001c=200, max type 0x001d=1, max type 0x001e=8, max type 0x001f=20, max type 0x0020=0, max type 0x0021=10000, max type 0x0022=1000, max type 0x0023=1000, oscar: ssi: syncing local list and server list oscar: ssi: activating server-stored buddy list blist: Updating buddy status for xxRatxx xxBoyxx (AIM/ICQ) blist: Updating buddy status for xxRatxx xxBoyxx (AIM/ICQ) oscar: Connecting to FLAP server 205.188.248.149:5190 of type 0x0018 dnsquery: IP resolved for 205.188.248.149 proxy: Attempting connection to 205.188.248.149 proxy: Connecting to 205.188.248.149:5190 with no proxy proxy: Connection in progress oscar: Connecting to FLAP server 205.188.176.90:5190 of type 0x000d proxy: Connected. oscar: connected to FLAP server of type 0x0018 dnsquery: IP resolved for 205.188.176.90 proxy: Attempting connection to 205.188.176.90 proxy: Connecting to 205.188.176.90:5190 with no proxy proxy: Connection in progress proxy: Connected. oscar: connected to FLAP server of type 0x000d oscar: FLAP connection of type 0x0018 is now fully connected oscar: FLAP connection of type 0x000d is now fully connected oscar: chat info: Chat Rights: oscar: chat info: Max Concurrent Rooms: 10 oscar: chat info: Exchange List: (16 total) oscar: chat info: 20 oscar: chat info: 16 oscar: chat info: 15 oscar: chat info: 14 oscar: chat info: 13 oscar: chat info: 12 oscar: chat info: 11 oscar: chat info: 10 oscar: chat info: 9 oscar: chat info: 8 oscar: chat info: 7 oscar: chat info: 6 oscar: chat info: 5 oscar: chat info: 4 oscar: chat info: 2 oscar: chat info: 1 util: Response headers: 'HTTP/1.1 200 OK CONTENT-LENGTH: 339 CONTENT-TYPE: text/xml; charset="utf-8" DATE: Tue, 28 Nov 2006 06:17:19 GMT EXT: SERVER: Linux/2.4.26-uc0, UPnP/1.0, Intel SDK for UPnP devices /1.2 ' util: parsed 339 upnp: NAT Returned IP: 24.45.216.147 util: Writing file accounts.xml to directory /home/Paul/.gaim util: Writing file blist.xml to directory /home/Paul/.gaim account: Disconnecting account 819a550 connection: Disconnecting connection 85b2188 connection: Deactivating keepalive. oscar: Destroying oscar connection of type 0x000d oscar: Destroying oscar connection of type 0x0018 oscar: Destroying oscar connection of type 0x0002 oscar: Signed off. connection: Destroying connection 85b2188 util: Writing file blist.xml to directory /home/Paul/.gaim main: Unloading all plugins plugins: Unloading plugin Gadu-Gadu plugins: Unloading plugin IRC plugins: Unloading plugin Jabber plugins: Unloading plugin MSN plugins: Unloading plugin GroupWise plugins: Unloading plugin AIM/ICQ plugins: Unloading plugin QQ plugins: Unloading plugin Sametime plugins: Unloading plugin SIMPLE plugins: Unloading plugin Yahoo plugins: Unloading plugin Zephyr plugins: Unloading plugin Tcl Plugin Loader Session Management: Handling closed ICE connection... done. Session Management: Connection closed. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. $ From yann.rouillard at jouy.inra.fr Wed Nov 29 12:12:29 2006 From: yann.rouillard at jouy.inra.fr (Yann Rouillard) Date: Wed, 29 Nov 2006 12:12:29 +0100 Subject: [csw-users] cyrus imapd In-Reply-To: References: Message-ID: <456D6B1D.3000004@jouy.inra.fr> > Second: > > Today i updated my cyrus imapd Server to the recent stable version. I > experienced some difficulties during the update procedure. ( I would > love to file a mantis entry. But i am still waiting for the EMail :) mantis is a better way to report bug as I don't always follow the csw user list. > Installing cyrus_imapd - Pop and Imap server from the Cyrus mail system > as > > ## Executing preinstall script. > /var/sadm/pkg/CSWcyrusimapd/install/preinstall: /usr/bin/getent: not found > Creating cyrus user... > UX: /usr/sbin/useradd: ERROR: cyrus is already in use. Choose another. > pkgadd: ERROR: preinstall script did not complete successfully the getent binary is usually present on defaut solaris install, it's in the package SUNWnisu, you can install it to quickly solve this bug But I will try to update the package to not require this binary (or to explicitely depend on this package). > Then, if you try to solve this problem with removing the cyrus user and > pkgrm the package you ran into the next problem. The preinstall script > is not forcing a unique uid for the cyrus user and therefore > /opt/csw/var/cyrus/mail is not accessible. There is no policy for uids, so I can't force a unique uid as it could collide with a currently used uid. But this bug only happen because the preinstall script didn't work as expected. You can solve your problem by doing this: chown -R cyrus:mail /opt/csw/var/cyrus /opt/csw/etc/cyrus Yann From aaron at ernieball.com Wed Nov 29 16:48:15 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Wed, 29 Nov 2006 07:48:15 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456BD4E2.2080807@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <456B60A3.5050903@yahoo.com> <456BD4E2.2080807@optonline.net> Message-ID: <456DABBF.4040800@ernieball.com> An HTML attachment was scrubbed... URL: http://lists.blastwave.org/pipermail/users/attachments/20061129/f59a4871/attachment.html From tmcmahon2 at yahoo.com Wed Nov 29 21:51:16 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 29 Nov 2006 15:51:16 -0500 Subject: [csw-users] Gaim audio problems Message-ID: <456DF2C4.9000500@yahoo.com> For those still seeing gaim audio problems if you could try the following I'd appreciate it. * Bring up /usr/dt/bin/sdtaudio and play /opt/csw/share/sounds/gaim/logout.wav * If that works try " /opt/csw/bin/gst-launch playbin uri=file:///usr/share/sounds/gaim/logout.wav " * Then open /opt/csw/bin/gstreamer-properties and tell me what's in the "Default Output Plugin" fields. Hit the test button and see if you get anything. On my Solaris 11 laptop with the latest gstreamer bits I can get sdtaudio to play sounds but gst-launch just runs and runs and runs with no audio ever coming. When I run the gstreamer-properties program with "Custom" and "sunaudiosink" as the Pipeline I get an error pop-up that says ' Custom: no element "sunaudiosink" ' From amit.uttam at gmail.com Wed Nov 29 23:55:01 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 29 Nov 2006 14:55:01 -0800 Subject: [csw-users] Firefox start up issues on Solaris 8 Message-ID: <90ee5fbb0611291455l216484e7vc56daea404b4304e@mail.gmail.com> Hey guys, I've been using blastwave for quite some time now. No major problems. However, there were a few issues with running firefox under Solaris 8. Here are the steps that I took: 1. Fresh install of Solaris 8 06/00 (Developer User Support Install) 2. Installed all the latest patches using 'pca' (Patch Check Advance) 3. Firefox started from commandline with the following command: firefox. Currently logged in as root. (root homedir = /root) Issues: 1. Firefox complains off 108652-79 not being installed (Xsun patch). However, this has been obsoleted by 119067-05 (which is installed on the system). 2. Firefox complains off 108435 not being installed. Tried installing 108435-22 (32-bit version) and patchadd terminates with the error "one or more packages included in 108435-22 is not installed in this system." 3. Firefox constantly prompts the default browser question at startup. Running firefox as a regular user eliminates this issue. Looks like firefox settings are not saved in the /root homedir. Thanks for the wonderful work and your help. Amit From pfelecan at blastwave.org Wed Nov 1 17:20:30 2006 From: pfelecan at blastwave.org (Peter FELECAN) Date: Wed, 01 Nov 2006 17:20:30 +0100 Subject: [csw-users] Emacs 22 snapsot 20061101 CVS in testing Message-ID: The monthly CVS snapshot of the next version of Emacs, is in the testing area: http://www.blastwave.org/testing/emacs-22.0.90,REV=cvs20061101-SunOS5.8-i386-CSW.pkg.gz http://www.blastwave.org/testing/emacs-22.0.90,REV=cvs20061101-SunOS5.8-sparc-CSW.pkg.gz If you wish to use/test the bleeding edge Emacs, you're welcome. But, if there are issues, please report them upstream; I'll manage only the packaging side. To install this package, you need to remove all dependent packages and Emacs 21.4 itself; after that, you install, using pkgadd, the CVS Emacs corresponding to your architecture and, if you're a TeX user, the nifty AucTex package. Note that this version includes the successors of: oortgnus and emacscalc, available as Blastwave packages, and many other, previously separate, packages --- e.g., tramp. I'll made a new testing package the next month. Enjoy -- Peter From r.mahoney at iconz.co.nz Thu Nov 2 09:25:47 2006 From: r.mahoney at iconz.co.nz (Richard Mahoney) Date: Thu, 02 Nov 2006 21:25:47 +1300 Subject: [csw-users] Eclipse 3.2.1 REV-2006.10.23 | /opt/csw/bin/eclipse: ./eclipse: cannot execute Message-ID: <1162455947.21557.11.camel@proliant> Dear Subscribers, On 28 Oct I upgraded from eclipse 3.2 to 3.2.1 REV-2006.10.23 and the new package will not start. The error follows: [rbm49 at proliant:7:~] % eclipse /opt/csw/bin/eclipse: ./eclipse: cannot execute I've checked the permissions and all seems to be fine. Although I'd like to give further details a complete failure such as this leaves me at a bit of a loss. The system is as follows: [rbm49 at proliant:7:~] % uname -a SunOS proliant 5.10 Generic_118855-19 i86pc i386 i86pc I'd be grateful for any suggestions. Best regards, Richard Mahoney -- Richard MAHONEY | internet: http://indica-et-buddhica.org/ Littledene | telephone/telefax (man.): +64 3 312 1699 Bay Road | cellular: +64 27 482 9986 OXFORD, NZ | email: r.mahoney at indica-et-buddhica.org ----------------------------------------------------------- Philologica: http://indica-et-buddhica.org/philologica/ Repositorium: http://indica-et-buddhica.org/repositorium/ From mats.larsson at ericsson.com Thu Nov 2 11:04:08 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 02 Nov 2006 11:04:08 +0100 Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Message-ID: <4549C298.6020100@ericsson.com> Dear Subscribers, Today I did try to upgrade gnome_panel from whatever version to 2.14.3,REV=2006.10.20 but I ran into problems: No existing install of CSWgnomepanel found. Installing... Trying http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz --10:57:09-- http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' Resolving proxy.uab.ericsson.se... 134.138.6.114 Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. Proxy request sent, awaiting response... 200 OK Length: 3,272,511 (3.1M) [application/octet-stream] 100%[========================================================================================>] 3,272,511 9.83M/s 10:57:09 (9.81 MB/s) - `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved [3272511/3272511] Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks ^C It did uninstall the first time but then it was looping forever. Anyone else seeing this? BR MOL From maybird1776 at yahoo.com Thu Nov 2 12:43:47 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 2 Nov 2006 03:43:47 -0800 (PST) Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Message-ID: <20061102114347.30168.qmail@web33606.mail.mud.yahoo.com> Install the updated gnome packages in www.blastwave.org/testing gnome_panel 2006.10.27 ~ Ken ----- Original Message ---- From: Mats Larsson To: questions and discussions Sent: Thursday, November 2, 2006 5:04:08 AM Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Dear Subscribers, Today I did try to upgrade gnome_panel from whatever version to 2.14.3,REV=2006.10.20 but I ran into problems: No existing install of CSWgnomepanel found. Installing... Trying http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz --10:57:09-- http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' Resolving proxy.uab.ericsson.se... 134.138.6.114 Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. Proxy request sent, awaiting response... 200 OK Length: 3,272,511 (3.1M) [application/octet-stream] 100%[========================================================================================>] 3,272,511 9.83M/s 10:57:09 (9.81 MB/s) - `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved [3272511/3272511] Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks Trying to install dependancy gnome_panel No existing install of CSWgnomepanel found. Installing... Pre-existing local file gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... Hmmm. Retrying with different archive offset...20774 blocks ^C It did uninstall the first time but then it was looping forever. Anyone else seeing this? BR MOL _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From ghenry at cmi.univ-mrs.fr Thu Nov 2 13:44:41 2006 From: ghenry at cmi.univ-mrs.fr (Gerard Henry) Date: Thu, 02 Nov 2006 13:44:41 +0100 Subject: [csw-users] qt4? Message-ID: <4549E839.3000905@cmi.univ-mrs.fr> hello all, i need qt4 to compile this app: http://www.xm1math.net/texmaker (Free cross-platform LaTeX editor) because i don't succeed in using kile, compile went fine, but execution do nothing. Actually, i see only qt3 in blastwave. Thanks in advance, gerard From a.cervellin at virgilio.it Thu Nov 2 14:27:09 2006 From: a.cervellin at virgilio.it (Alessio Cervellin) Date: Thu, 2 Nov 2006 14:27:09 +0100 (GMT+01:00) Subject: [csw-users] qt4? Message-ID: <10ea8da005f.a.cervellin@virgilio.it> You may wish to try (at your own "risk") the qt4 package actually in testing: http://www.blastwave.org/testing/ ----Messaggio originale---- Da: ghenry at cmi.univ-mrs.fr Data: 2-nov-2006 1.44 PM A: "questions and discussions" Ogg: [csw-users] qt4? hello all, i need qt4 to compile this app: http://www.xm1math.net/texmaker (Free cross-platform LaTeX editor) because i don't succeed in using kile, compile went fine, but execution do nothing. Actually, i see only qt3 in blastwave. Thanks in advance, gerard _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave. org/mailman/listinfo/users From mats.larsson at ericsson.com Thu Nov 2 15:10:07 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 02 Nov 2006 15:10:07 +0100 Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install In-Reply-To: <20061102114347.30168.qmail@web33606.mail.mud.yahoo.com> References: <20061102114347.30168.qmail@web33606.mail.mud.yahoo.com> Message-ID: <4549FC3F.8020207@ericsson.com> I could try that but I'm not sure what we will achieve with that. There is no problem installing the gnome_panel 2006.10.20 pkg with pkgadd if I download it first as you do with pkgs from testing. It's only with pkg-get -i (or -u) I get the problem described below. /MOL On 2006-11-02 12:43, ken mays wrote: > Install the updated gnome packages in www.blastwave.org/testing > gnome_panel 2006.10.27 > ~ Ken > ----- Original Message ---- > From: Mats Larsson > To: questions and discussions > Sent: Thursday, November 2, 2006 5:04:08 AM > Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > Dear Subscribers, > Today I did try to upgrade gnome_panel from whatever version to > 2.14.3,REV=2006.10.20 but I ran into problems: > No existing install of CSWgnomepanel found. Installing... > Trying > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > --10:57:09-- > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' > Resolving proxy.uab.ericsson.se... 134.138.6.114 > Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. > Proxy request sent, awaiting response... 200 OK > Length: 3,272,511 (3.1M) [application/octet-stream] > 100%[========================================================================================>] > 3,272,511 9.83M/s > 10:57:09 (9.81 MB/s) - > `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved > [3272511/3272511] > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > ^C > It did uninstall the first time but then it was looping forever. Anyone > else seeing this? > BR MOL > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users From ghenry at cmi.univ-mrs.fr Thu Nov 2 15:25:36 2006 From: ghenry at cmi.univ-mrs.fr (Gerard Henry) Date: Thu, 02 Nov 2006 15:25:36 +0100 Subject: [csw-users] qt4? In-Reply-To: <10ea8da005f.a.cervellin@virgilio.it> References: <10ea8da005f.a.cervellin@virgilio.it> Message-ID: <4549FFE0.1080208@cmi.univ-mrs.fr> Alessio Cervellin wrote: > You may wish to try (at your own "risk") the qt4 package actually in > testing: > http://www.blastwave.org/testing/ > it doesn't work: 4.2.0 mombasa-gerard% qmake -unix PREFIX=/usr/local/texmaker-1.4 texmaker.pro Project LOAD(): Feature qt_config cannot be found. and according to this message: http://lists.trolltech.com/qt4-preview-feedback/2005-06/thread00123-0.html not simple to fix here gerard From maybird1776 at yahoo.com Thu Nov 2 16:27:07 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 2 Nov 2006 07:27:07 -0800 (PST) Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install Message-ID: <20061102152707.4048.qmail@web33607.mail.mud.yahoo.com> Yes. It is a package dependency issue which was fixed in the newer package. We could patch pkg-get to not to try to install a package that is already installed [with same version numbering]. ~Ken ----- Original Message ---- From: Mats Larsson To: questions and discussions Sent: Thursday, November 2, 2006 9:10:07 AM Subject: Re: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install I could try that but I'm not sure what we will achieve with that. There is no problem installing the gnome_panel 2006.10.20 pkg with pkgadd if I download it first as you do with pkgs from testing. It's only with pkg-get -i (or -u) I get the problem described below. /MOL On 2006-11-02 12:43, ken mays wrote: > Install the updated gnome packages in www.blastwave.org/testing > gnome_panel 2006.10.27 > ~ Ken > ----- Original Message ---- > From: Mats Larsson > To: questions and discussions > Sent: Thursday, November 2, 2006 5:04:08 AM > Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > Dear Subscribers, > Today I did try to upgrade gnome_panel from whatever version to > 2.14.3,REV=2006.10.20 but I ran into problems: > No existing install of CSWgnomepanel found. Installing... > Trying > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > --10:57:09-- > http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz > => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' > Resolving proxy.uab.ericsson.se... 134.138.6.114 > Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. > Proxy request sent, awaiting response... 200 OK > Length: 3,272,511 (3.1M) [application/octet-stream] > 100%[========================================================================================>] > 3,272,511 9.83M/s > 10:57:09 (9.81 MB/s) - > `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved > [3272511/3272511] > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > Trying to install dependancy gnome_panel > No existing install of CSWgnomepanel found. Installing... > Pre-existing local file > gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum > Keeping existing file > Analysing special files... > Hmmm. Retrying with different archive offset...20774 blocks > ^C > It did uninstall the first time but then it was looping forever. Anyone > else seeing this? > BR MOL > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From maybird1776 at yahoo.com Thu Nov 2 16:30:48 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 2 Nov 2006 07:30:48 -0800 (PST) Subject: [csw-users] qt4? Message-ID: <20061102153048.32672.qmail@web33615.mail.mud.yahoo.com> Make sure you look in the right directory for the pkgconfig files. The package builds all Qt4 tutorials and examples so it'll work for you. ~Ken ----- Original Message ---- From: Gerard Henry To: questions and discussions Sent: Thursday, November 2, 2006 9:25:36 AM Subject: Re: [csw-users] qt4? Alessio Cervellin wrote: > You may wish to try (at your own "risk") the qt4 package actually in > testing: > http://www.blastwave.org/testing/ > it doesn't work: 4.2.0 mombasa-gerard% qmake -unix PREFIX=/usr/local/texmaker-1.4 texmaker.pro Project LOAD(): Feature qt_config cannot be found. and according to this message: http://lists.trolltech.com/qt4-preview-feedback/2005-06/thread00123-0.html not simple to fix here gerard _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From mats.larsson at ericsson.com Fri Nov 3 12:25:13 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Fri, 03 Nov 2006 12:25:13 +0100 Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install In-Reply-To: <20061102152707.4048.qmail@web33607.mail.mud.yahoo.com> References: <20061102152707.4048.qmail@web33607.mail.mud.yahoo.com> Message-ID: <454B2719.6000707@ericsson.com> Then I suggest moving the gnome_panel 2006.10.27 from testing to unstable as soon as it can be done. BR MOL n 2006-11-02 16:27, ken mays wrote: > Yes. It is a package dependency issue which was fixed in the newer package. We could patch pkg-get to not to try to install a package that is already installed [with same version numbering]. > > ~Ken > > > ----- Original Message ---- > From: Mats Larsson > To: questions and discussions > Sent: Thursday, November 2, 2006 9:10:07 AM > Subject: Re: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > > > I could try that but I'm not sure what we will achieve with that. There > is no problem installing the gnome_panel 2006.10.20 pkg with pkgadd if I > download it first as you do with pkgs from testing. It's only with > pkg-get -i (or -u) I get the problem described below. > > /MOL > > On 2006-11-02 12:43, ken mays wrote: >> Install the updated gnome packages in www.blastwave.org/testing >> gnome_panel 2006.10.27 > >> ~ Ken > > >> ----- Original Message ---- >> From: Mats Larsson >> To: questions and discussions >> Sent: Thursday, November 2, 2006 5:04:08 AM >> Subject: [csw-users] gnome_panel 2.14.3,REV=2006.10.20 won't install > >> Dear Subscribers, > >> Today I did try to upgrade gnome_panel from whatever version to >> 2.14.3,REV=2006.10.20 but I ran into problems: > >> No existing install of CSWgnomepanel found. Installing... >> Trying >> http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz >> --10:57:09-- >> http://blastwave.informatik.uni-erlangen.de/csw/unstable/sparc/5.8/gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz >> => `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' >> Resolving proxy.uab.ericsson.se... 134.138.6.114 >> Connecting to proxy.uab.ericsson.se|134.138.6.114|:8080... connected. >> Proxy request sent, awaiting response... 200 OK >> Length: 3,272,511 (3.1M) [application/octet-stream] > >> 100%[========================================================================================>] >> 3,272,511 9.83M/s > >> 10:57:09 (9.81 MB/s) - >> `gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz' saved >> [3272511/3272511] > >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> Trying to install dependancy gnome_panel >> No existing install of CSWgnomepanel found. Installing... >> Pre-existing local file >> gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum >> Keeping existing file >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> Trying to install dependancy gnome_panel >> No existing install of CSWgnomepanel found. Installing... >> Pre-existing local file >> gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum >> Keeping existing file >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> Trying to install dependancy gnome_panel >> No existing install of CSWgnomepanel found. Installing... >> Pre-existing local file >> gnome_panel-2.14.3,REV=2006.10.20-SunOS5.8-sparc-CSW.pkg.gz matches checksum >> Keeping existing file >> Analysing special files... >> Hmmm. Retrying with different archive offset...20774 blocks > >> ^C > >> It did uninstall the first time but then it was looping forever. Anyone >> else seeing this? > >> BR MOL > > > >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users > > > > > >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users From coolvibe at hackerheaven.org Mon Nov 6 15:14:46 2006 From: coolvibe at hackerheaven.org (Emiel Kollof) Date: Mon, 6 Nov 2006 15:14:46 +0100 Subject: [csw-users] Blastwave KDE and antialiased fonts Message-ID: <200611061514.52272.coolvibe@hackerheaven.org> Hi list, This might be a FAQ, but I'd like to see this cleared up anyway. Why are the kdelibs not compiled with antialiased fonts (freetype) support? I can't really find a conclusive answer about that with Google, so I'm asking here. Is there any way I can recompile the kdelibs package myself and have it replace the blastwave package? Have you made any patches to kdelibs to get it to compile cleanly? If yes, where are they? I could make a anti-aliasing-supporting version of kdelibs and distribute it if you don't have the time or will to do it. Oh, any chance of seeing KDE 3.5.x some time on blastwave? Cheers, Emiel -- "It was a virgin forest, a place where the Hand of Man had never set foot." -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 191 bytes Desc: not available URL: From dclarke at blastwave.org Mon Nov 6 15:27:32 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 6 Nov 2006 09:27:32 -0500 (EST) Subject: [csw-users] Blastwave KDE and antialiased fonts In-Reply-To: <200611061514.52272.coolvibe@hackerheaven.org> References: <200611061514.52272.coolvibe@hackerheaven.org> Message-ID: <36719.24.146.17.108.1162823252.squirrel@mail.blastwave.org> > Hi list, > > This might be a FAQ, but I'd like to see this cleared up anyway. Why are the > kdelibs not compiled with antialiased fonts (freetype) support? I think that there actually is a good reason. It may not be a permanent one but its a good one. I will await the arrival of Ken Mays to address that issue. > I can't really find a conclusive answer about that with Google, so > I'm asking here. Sometimes google brings up advertisements faster than answers. I know that is a useless answer also. Sorry .. its early here. Let me break the rest of your post into digestable chunks : > Is there any way I can recompile the kdelibs package myself and have it > replace the blastwave package? Let's call that Question 1. > Have you made any patches to kdelibs to get it to compile cleanly? That will be Question 2. > If yes, where are they? That can be Question 2.1 which is a sub-section of (2) above. > I could make a anti-aliasing-supporting version of kdelibs and > distribute it if you don't have the time or will to do it. That will be Statement 1. > Oh, any chance of seeing KDE 3.5.x some time on blastwave? Finally we have Question 3. Question 3 should be addressed first. KDE 3.5.5 just shipped recently. Well, last month. By internet speed measurements it may as well be last year. http://www.kde.org/announcements/announce-3.5.5.php I think we discussed this and are looking at a big leap in KDE at some point in the near future. See http://www.kde.org/info/3.80.2.php Re : Statement (1) If you want to participate then great! Join up via the sign up page and then let's see if we can get your packages built, tested, integrated into KDE and released. http://www.blastwave.org/maintainer-signup.php The other questions will await the arrival of Ken Mays. He is Mr. KDE around here and after the last few months he is Mr. GNOME also. Let me look into a few of those questions and get back to you. Dennis From realmcking at gmail.com Mon Nov 6 15:54:10 2006 From: realmcking at gmail.com (Mark McCoy) Date: Mon, 6 Nov 2006 08:54:10 -0600 Subject: [csw-users] Blastwave KDE and antialiased fonts In-Reply-To: <36719.24.146.17.108.1162823252.squirrel@mail.blastwave.org> References: <200611061514.52272.coolvibe@hackerheaven.org> <36719.24.146.17.108.1162823252.squirrel@mail.blastwave.org> Message-ID: On 11/6/06, Dennis Clarke wrote: > > > Hi list, > > > > This might be a FAQ, but I'd like to see this cleared up anyway. Why are the > > kdelibs not compiled with antialiased fonts (freetype) support? > > I think that there actually is a good reason. It may not be a permanent one > but its a good one. I will await the arrival of Ken Mays to address that > issue. > > > I can't really find a conclusive answer about that with Google, so > > I'm asking here. > > Sometimes google brings up advertisements faster than answers. > > I know that is a useless answer also. > > Sorry .. its early here. > > Let me break the rest of your post into digestable chunks : > > > Is there any way I can recompile the kdelibs package myself and have it > > replace the blastwave package? > > Let's call that Question 1. > > > Have you made any patches to kdelibs to get it to compile cleanly? > > That will be Question 2. > > > If yes, where are they? > > That can be Question 2.1 which is a sub-section of (2) above. > > > I could make a anti-aliasing-supporting version of kdelibs and > > distribute it if you don't have the time or will to do it. > > That will be Statement 1. > > > Oh, any chance of seeing KDE 3.5.x some time on blastwave? > > Finally we have Question 3. > > Question 3 should be addressed first. > > KDE 3.5.5 just shipped recently. Well, last month. By internet speed > measurements it may as well be last year. > > http://www.kde.org/announcements/announce-3.5.5.php > > I think we discussed this and are looking at a big leap in KDE at some > point in the near future. See http://www.kde.org/info/3.80.2.php > > Re : Statement (1) > > If you want to participate then great! > > Join up via the sign up page and then let's see if we can get your > packages built, tested, integrated into KDE and released. > > http://www.blastwave.org/maintainer-signup.php > > The other questions will await the arrival of Ken Mays. He is Mr. KDE > around here and after the last few months he is Mr. GNOME also. > > Let me look into a few of those questions and get back to you. > > Dennis > > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > Since blastwave is now using the GAR ports system to manage building their packages, and KDE's Konstruct utility is based on GAR, could Konstruct be somehow merged into blastwave's GAR tree to build the KDE packages? I tried building KDE from Konstruct last week, and ran into some errors that I didn't know how to solve right away, so it went back on the shelf until I can get a few moments to look at it again. If we could get someone who is more knowledgable about GAR to get the ball rolling, I would be happy to help test. -- Mark McCoy -- Professional Unix geek Here in America we are descended in blood and in spirit from revolutionists and rebels - men and women who dared to dissent from accepted doctrine. As their heirs, may we never confuse honest dissent with disloyal subversion. -- Dwight D. Eisenhower From maybird1776 at yahoo.com Mon Nov 6 16:30:31 2006 From: maybird1776 at yahoo.com (ken mays) Date: Mon, 6 Nov 2006 07:30:31 -0800 (PST) Subject: [csw-users] Blastwave KDE and antialiased fonts Message-ID: <20061106153032.88670.qmail@web33610.mail.mud.yahoo.com> As they said in the Matrix trilogies, there is no spoon.... (aka KDE 3.5.5 for Blastwave). Seriously, focus your sites on KDE 4.0. We have Qt 4.2.0 ready and will spin off KDE 4.0 when it is officially released. If you want to help in this venture, work on building and testing KDE 4.0 (i.e. currently 3.80.2) for Solaris. Provide feedback of your issues and concerns. Ref: http://www.kde.org/info/3.80.2.php Cory Omand already has the KDE components in place for the build system and I just have to have him update this for KDE 4.0. As for the antialiased fonts, I have freetype 2.2.1 available in /testing so just build KDElibs against that and maybe Qt. Turn on the options in the display and font control panels. ~ Ken ----- Original Message ---- From: Mark McCoy To: questions and discussions Sent: Monday, November 6, 2006 9:54:10 AM Subject: Re: [csw-users] Blastwave KDE and antialiased fonts On 11/6/06, Dennis Clarke wrote: > > > Hi list, > > > > This might be a FAQ, but I'd like to see this cleared up anyway. Why are the > > kdelibs not compiled with antialiased fonts (freetype) support? > > I think that there actually is a good reason. It may not be a permanent one > but its a good one. I will await the arrival of Ken Mays to address that > issue. > > > I can't really find a conclusive answer about that with Google, so > > I'm asking here. > > Sometimes google brings up advertisements faster than answers. > > I know that is a useless answer also. > > Sorry .. its early here. > > Let me break the rest of your post into digestable chunks : > > > Is there any way I can recompile the kdelibs package myself and have it > > replace the blastwave package? > > Let's call that Question 1. > > > Have you made any patches to kdelibs to get it to compile cleanly? > > That will be Question 2. > > > If yes, where are they? > > That can be Question 2.1 which is a sub-section of (2) above. > > > I could make a anti-aliasing-supporting version of kdelibs and > > distribute it if you don't have the time or will to do it. > > That will be Statement 1. > > > Oh, any chance of seeing KDE 3.5.x some time on blastwave? > > Finally we have Question 3. > > Question 3 should be addressed first. > > KDE 3.5.5 just shipped recently. Well, last month. By internet speed > measurements it may as well be last year. > > http://www.kde.org/announcements/announce-3.5.5.php > > I think we discussed this and are looking at a big leap in KDE at some > point in the near future. See http://www.kde.org/info/3.80.2.php > > Re : Statement (1) > > If you want to participate then great! > > Join up via the sign up page and then let's see if we can get your > packages built, tested, integrated into KDE and released. > > http://www.blastwave.org/maintainer-signup.php > > The other questions will await the arrival of Ken Mays. He is Mr. KDE > around here and after the last few months he is Mr. GNOME also. > > Let me look into a few of those questions and get back to you. > > Dennis > > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > Since blastwave is now using the GAR ports system to manage building their packages, and KDE's Konstruct utility is based on GAR, could Konstruct be somehow merged into blastwave's GAR tree to build the KDE packages? I tried building KDE from Konstruct last week, and ran into some errors that I didn't know how to solve right away, so it went back on the shelf until I can get a few moments to look at it again. If we could get someone who is more knowledgable about GAR to get the ball rolling, I would be happy to help test. -- Mark McCoy -- Professional Unix geek Here in America we are descended in blood and in spirit from revolutionists and rebels - men and women who dared to dissent from accepted doctrine. As their heirs, may we never confuse honest dissent with disloyal subversion. -- Dwight D. Eisenhower _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users From obi at unixkiste.org Mon Nov 6 17:24:34 2006 From: obi at unixkiste.org (Stefan Held) Date: Mon, 6 Nov 2006 17:24:34 +0100 Subject: [csw-users] cyrus imapd Message-ID: Hi Guys. First of all. Big thx to the Community here. Second. This is the third attempt to contribute something to blastwave. What does one need to do if he wants to become a maintainer of a wanted package? Seems like filling in the required Fields on the webpage is not good enough? If someone is willing to point me to the right direction i would be very thankfull. Second: Today i updated my cyrus imapd Server to the recent stable version. I experienced some difficulties during the update procedure. ( I would love to file a mantis entry. But i am still waiting for the EMail :) Installing cyrus_imapd - Pop and Imap server from the Cyrus mail system as ## Executing preinstall script. /var/sadm/pkg/CSWcyrusimapd/install/preinstall: /usr/bin/getent: not found Creating cyrus user... UX: /usr/sbin/useradd: ERROR: cyrus is already in use. Choose another. pkgadd: ERROR: preinstall script did not complete successfully Then, if you try to solve this problem with removing the cyrus user and pkgrm the package you ran into the next problem. The preinstall script is not forcing a unique uid for the cyrus user and therefore / opt/csw/var/cyrus/mail is not accessible. -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 2147 bytes Desc: not available URL: From william at wbonnet.net Tue Nov 7 16:04:59 2006 From: william at wbonnet.net (William Bonnet) Date: Tue, 7 Nov 2006 16:04:59 +0100 Subject: [csw-users] Eclipse 3.2.1 REV-2006.10.23 | /opt/csw/bin/eclipse: ./eclipse: cannot execute In-Reply-To: <1162455947.21557.11.camel@proliant> References: <1162455947.21557.11.camel@proliant> Message-ID: <9A8357E5-9E65-4571-994D-0F2AA88246E0@wbonnet.net> Hi all > I've checked the permissions and all seems to be fine. Although I'd > like to give further details a complete failure such as this leaves me > at a bit of a loss. The system is as follows: > > [rbm49 at proliant:7:~] % uname -a > SunOS proliant 5.10 Generic_118855-19 i86pc i386 i86pc > > > I'd be grateful for any suggestions. > I have found the origin of the problem. I made on error while build the x86 package. SPARC package is not concerned by this problem. I have started to work on a new build fixing this issue. I'll let you know as soon as a new package will be ready. Kind regards, William From amit.uttam at gmail.com Wed Nov 8 04:44:07 2006 From: amit.uttam at gmail.com (Amit) Date: Tue, 7 Nov 2006 19:44:07 -0800 Subject: [csw-users] netsnmp install issues Message-ID: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> Hey guys, First of all thanks for the all the work put in to blastwave! As a first time user of Solaris, blastwave has been a wonderful tool to work with. So far not too many issues where I haven't figured out by searching the mailing lists or Google. This one has got me tied in a knot. I did the following: 1) pkg-get -i netsnmp 2) I get the following error: bash-3.1$ sudo pkg-get -i netsnmp Password: No existing install of CSWnetsnmp found. Installing... Pre-existing local file netsnmp-5.3.0.1,REV=2006.04.08-SunOS5.8-sparc-CSW.pkg.gz matches checksum Keeping existing file Analysing special files... ERROR: no info for SUNWpiclu. Cannot install dependancy. ERROR: could not install required dependancies for CSWnetsnmp bash-3.1$ 3) Now, I go ahead and search for the package SUNWpiclu in my 'Solaris 8 06/00' software CDs but could not find the package in any of the directories. (By the way I also tried the pkgadd -d /cdrom/.../Product method but could find the listing). Any suggestions or help would be greatly appreciated. Thanks, Amit From comand at blastwave.org Wed Nov 8 08:48:09 2006 From: comand at blastwave.org (Cory Omand) Date: Tue, 7 Nov 2006 23:48:09 -0800 Subject: [csw-users] netsnmp install issues In-Reply-To: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> Message-ID: On 11/7/06, Amit wrote: [snip] > ERROR: no info for SUNWpiclu. Cannot install dependancy. > ERROR: could not install required dependancies for CSWnetsnmp [snip] > > Any suggestions or help would be greatly appreciated. > This package comes in a patch (and in more recent releases of S8) -- you might want to ensure your system is fully patched up, or install a more recent release of S8. The package should probably be checking for the relevant patch and reporting whether or not you have it -- you could raise a bug on the package to suggest this to the maintainer. HTH, Cory. From james at blastwave.org Wed Nov 8 10:31:47 2006 From: james at blastwave.org (James Lee) Date: Wed, 08 Nov 2006 09:31:47 GMT Subject: [csw-users] netsnmp install issues In-Reply-To: References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> Message-ID: <20061108.9314700.1726629784@gyor.asd.demon.co.uk> On 08/11/06, 07:48:09, Cory Omand wrote regarding Re: [csw-users] netsnmp install issues: > On 11/7/06, Amit wrote: > [snip] > > ERROR: no info for SUNWpiclu. Cannot install dependancy. > > ERROR: could not install required dependancies for CSWnetsnmp > [snip] > > > > Any suggestions or help would be greatly appreciated. > > > This package comes in a patch Please will someone tell us which? James. From oldwenstyle at yahoo.com Wed Nov 8 16:22:10 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Wed, 8 Nov 2006 07:22:10 -0800 (PST) Subject: [csw-users] pkg-get help Message-ID: <20061108152210.22229.qmail@web56609.mail.re3.yahoo.com> Hello all, I have followed the instructions on the blastwave website, but I am still having trouble getting this to work. Can someone help me. The following are the known variables. -- SunOS 5.8 -- Server does not have DNS. I can ping any IP, but I can not resolve names (www.google.com) -- I have tried url=http://128.210.3.14/mirrors/blastwave.org/unstable/ ********pkg-get.conf********************** # Configuration file for "pkg-get" # man pkg-get for details on the program # This config file has been pre-customized for use with CSW packages. # The latest set of CSW mirrors is always available at # http://www.blastwave.org/mirrors.html # default site, in USA: url=http://ftp.math.purdue.edu/mirrors/blastwave.org/unstable/ # secondary US mirror #url=http://csw.ch.bme.hu/unstable/ # Denmark mirror. FTP preferred. #url=ftp://mirrors.sunsite.dk/mirrors/csw/unstable #url=http://mirrors.sunsite.dk/csw/unstable # If you are behind a firewall, set one of these as appropriate #ftp_proxy=http://your-proxy:8023 #http_proxy=http://your-proxy:8023 #export http_proxy ftp_proxy # You may also set PROXYFLAGS in your environment to set flags "/opt/csw/etc/pkg-get.conf" 43 lines, 1449 characters ******************************************* **** test ************* #: / -> which wget /tmp/wget/wget #: / -> which pkg-get /opt/csw/bin/pkg-get #: / -> *********************** *** run attempt *************************** #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have checksums compared, you must install one of: md5 or gmd5sum (gmd5sum is available with GNU textutils) try 'pkg-get install textutils' WARNING: no catalog file for site ftp.math.purdue.edu Updating catalog file first Getting catalog... /opt/csw/bin/pkg-get: wget: cannot execute ERROR: could not get catalog file #: / -> ******************************************* Thank you for your help...... Oldwen --------------------------------- Access over 1 million songs - Yahoo! Music Unlimited. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dclarke at blastwave.org Wed Nov 8 16:31:31 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Wed, 8 Nov 2006 10:31:31 -0500 (EST) Subject: [csw-users] netsnmp install issues In-Reply-To: <20061108.9314700.1726629784@gyor.asd.demon.co.uk> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> <20061108.9314700.1726629784@gyor.asd.demon.co.uk> Message-ID: <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> > On 08/11/06, 07:48:09, Cory Omand wrote regarding > Re: [csw-users] netsnmp install issues: > >> On 11/7/06, Amit wrote: >> [snip] >> > ERROR: no info for SUNWpiclu. Cannot install dependancy. >> > ERROR: could not install required dependancies for CSWnetsnmp >> [snip] >> > >> > Any suggestions or help would be greatly appreciated. >> > > >> This package comes in a patch > > Please will someone tell us which? > Sunsolve is our friend ... let me do a search. dclarke From james at blastwave.org Wed Nov 8 17:03:59 2006 From: james at blastwave.org (James Lee) Date: Wed, 08 Nov 2006 16:03:59 GMT Subject: [csw-users] pkg-get help In-Reply-To: <20061108152210.22229.qmail@web56609.mail.re3.yahoo.com> References: <20061108152210.22229.qmail@web56609.mail.re3.yahoo.com> Message-ID: <20061108.16035900.305452540@gyor.asd.demon.co.uk> On 08/11/06, 15:22:10, Oldwen Adriano wrote regarding [csw-users] pkg-get help: > -- SunOS 5.8 > -- Server does not have DNS. I can ping any IP, but I can not resolve names (www.google.com) > -- I have tried url=http://128.210.3.14/mirrors/blastwave.org/unstable/ $ curl -I http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog HTTP/1.1 404 Not Found Date: Wed, 08 Nov 2006 15:56:42 GMT Server: Apache Content-Type: text/html So that is not going to work. The reason is because the server uses the host name to decide what to do. How to set the host header? First test again with curl: $ curl -I -H "Host:ftp.math.purdue.edu" http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog HTTP/1.1 200 OK Date: Wed, 08 Nov 2006 15:56:51 GMT Server: Apache Last-Modified: Fri, 03 Nov 2006 20:54:38 GMT ETag: "c85c-2e874-454bac8e" Accept-Ranges: bytes Content-Length: 190580 Content-Type: text/plain Good, now with wget: $ wget --header="Host:ftp.math.purdue.edu" http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog -O /dev/null --15:57:43-- http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog => `/dev/null' Connecting to 128.210.3.14:80... connected. HTTP request sent, awaiting response... 200 OK Length: 190,580 (186K) [text/plain] 100%[=================================================================== =============>] 190,580 103.00K/s 15:57:45 (102.93 KB/s) - `/dev/null' saved [190580/190580] you get make pkg-get use this by setting WGET: $ WGET="wget --header=Host:ftp.math.purdue.edu" $ export WGET $ $WGET http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog -O /dev/null --16:00:45-- http://128.210.3.14/mirrors/blastwave.org/unstable/sparc/5.8/catalog => `/dev/null' Connecting to 128.210.3.14:80... connected. HTTP request sent, awaiting response... 200 OK Length: 190,580 (186K) [text/plain] 100%[=================================================================== =============>] 190,580 104.68K/s 15:58:32 (104.36 KB/s) - `/dev/null' saved [190580/190580] Or it would be better specifically in the url setting (untested by me, please try it): url="--header=Host:ftp.math.purdue.edu http://128.210.3.14/mirrors/blastwave.org/unstable/" From oldwenstyle at yahoo.com Wed Nov 8 18:48:52 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Wed, 8 Nov 2006 09:48:52 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <4551FB4C.7000603@Sun.COM> Message-ID: <20061108174852.81808.qmail@web56601.mail.re3.yahoo.com> These are my results from your suggestion. Any other ideas?? Thank you... #: / -> nslookup nixcraft.in Server: dns.vsnl.net.in Address: 202.54.1.30 *** dns.vsnl.net.in can't find nixcraft.in: Query refused #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have checksums compared, you must install one of: md5 or gmd5sum (gmd5sum is available with GNU textutils) try 'pkg-get install textutils' WARNING: no catalog file for site ftp.math.purdue.edu Updating catalog file first Getting catalog... /opt/csw/bin/pkg-get: wget: cannot execute ERROR: could not get catalog file #: / -> Armand Heijster - Sun EMEA wrote: 1) Create the file called /etc/resolv.conf - which includes the primary and secondary DNS server IP address for Solaris system, it can be your own DNS server or your ISPs DNS server: # touch /etc/resolv.conf Open /etc/resolv.conf using vi text editor: # vi /etc/resolv.conf Add following lines to it: search nixcraft.in nameserver 202.54.1.30 nameserver 202.54.1.18 Where, nameserver IP : It is IP of first DNS server search nixcraft.in : Default domain name to search. For example, if you type command nslookup www, it will search it as www.nixcraft.in 2) Enable the name resolving using DNS as follows: # cp /etc/nsswitch.dns /etc/nsswitch.conf 3) Test it by running the nslookup command as follows: # nslookup nixcraft.in OR # /usr/sfw/sbin/nslookup nixcraft.in Output: Server: gwbsd2vsnl.nixcraft.in Address: 192.168.1.202 Non-authoritative answer: Name: nixcraft.in Address: 202.71.128.225 Oldwen Adriano wrote: Hello all, I have followed the instructions on the blastwave website, but I am still having trouble getting this to work. Can someone help me. The following are the known variables. -- SunOS 5.8 -- Server does not have DNS. I can ping any IP, but I can not resolve names (www.google.com) -- I have tried url=http://128.210.3.14/mirrors/blastwave.org/unstable/ ********pkg-get.conf********************** # Configuration file for "pkg-get" # man pkg-get for details on the program # This config file has been pre-customized for use with CSW packages. # The latest set of CSW mirrors is always available at # http://www.blastwave.org/mirrors.html # default site, in USA: url=http://ftp.math.purdue.edu/mirrors/blastwave.org/unstable/ # secondary US mirror #url=http://csw.ch.bme.hu/unstable/ # Denmark mirror. FTP preferred. #url=ftp://mirrors.sunsite.dk/mirrors/csw/unstable #url=http://mirrors.sunsite.dk/csw/unstable # If you are behind a firewall, set one of these as appropriate #ftp_proxy=http://your-proxy:8023 #http_proxy=http://your-proxy:8023 #export http_proxy ftp_proxy # You may also set PROXYFLAGS in your environment to set flags "/opt/csw/etc/pkg-get.conf" 43 lines, 1449 characters ******************************************* **** test ************* #: / -> which wget /tmp/wget/wget #: / -> which pkg-get /opt/csw/bin/pkg-get #: / -> *********************** *** run attempt *************************** #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have checksums compared, you must install one of: md5 or gmd5sum (gmd5sum is available with GNU textutils) try 'pkg-get install textutils' WARNING: no catalog file for site ftp.math.purdue.edu Updating catalog file first Getting catalog... /opt/csw/bin/pkg-get: wget: cannot execute ERROR: could not get catalog file #: / -> ******************************************* Thank you for your help...... Oldwen --------------------------------- Access over 1 million songs - Yahoo! Music Unlimited. --------------------------------- _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users -- Armand Heijster TSC emea x64 - SC MC Sun Microsystems, Inc. ES Phone +31 20 517 47 74 Email Armand.Heijster at Sun.COM --------------------------------- Check out the all-new Yahoo! Mail - Fire up a more powerful email and get things done faster. -------------- next part -------------- An HTML attachment was scrubbed... URL: From james at blastwave.org Wed Nov 8 19:02:17 2006 From: james at blastwave.org (James Lee) Date: Wed, 08 Nov 2006 18:02:17 GMT Subject: [csw-users] pkg-get help In-Reply-To: <20061108174852.81808.qmail@web56601.mail.re3.yahoo.com> References: <20061108174852.81808.qmail@web56601.mail.re3.yahoo.com> Message-ID: <20061108.18021700.889439035@gyor.asd.demon.co.uk> On 08/11/06, 17:48:52, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > #: / -> pkg-get -i wget > WARNING: gpg not found > NOTE: To have checksums compared, you must install one of: > md5 or gmd5sum (gmd5sum is available with GNU textutils) > try 'pkg-get install textutils' > WARNING: no catalog file for site ftp.math.purdue.edu > Updating catalog file first > Getting catalog... > /opt/csw/bin/pkg-get: wget: cannot execute This is another problem, I thought we'd do the top one first. I think you need: $ chmod +x /tmp/wget/wget From oldwenstyle at yahoo.com Wed Nov 8 20:58:21 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Wed, 8 Nov 2006 11:58:21 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <20061108.18021700.889439035@gyor.asd.demon.co.uk> Message-ID: <20061108195821.94045.qmail@web56606.mail.re3.yahoo.com> Thank you for your reply, but this did not fix my problem. I still receive the same error when trying to execute pkg-get. Any other suggestions or ideas?? James Lee wrote: On 08/11/06, 17:48:52, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > #: / -> pkg-get -i wget > WARNING: gpg not found > NOTE: To have checksums compared, you must install one of: > md5 or gmd5sum (gmd5sum is available with GNU textutils) > try 'pkg-get install textutils' > WARNING: no catalog file for site ftp.math.purdue.edu > Updating catalog file first > Getting catalog... > /opt/csw/bin/pkg-get: wget: cannot execute This is another problem, I thought we'd do the top one first. I think you need: $ chmod +x /tmp/wget/wget _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Sponsored Link Degrees online in as fast as 1 Yr - MBA, Bachelor's, Master's, Associate - Click now to apply -------------- next part -------------- An HTML attachment was scrubbed... URL: From amit.uttam at gmail.com Wed Nov 8 21:18:55 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 8 Nov 2006 12:18:55 -0800 Subject: [csw-users] netsnmp install issues In-Reply-To: <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> <20061108.9314700.1726629784@gyor.asd.demon.co.uk> <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> Message-ID: <90ee5fbb0611081218t53ff840auda6f1f3a1c2476c@mail.gmail.com> Here's what I dug up: # PICL: Platform Information and Control Library # PICL daemon stores and retrieves platform-specific device data. SUNWpiclr PICL framework [r] SUNWpiclh PICL header files SUNWpiclu PICL libraries and plugins SUNWpiclx PICL libraries (64-bit) The above information was obtained from http://people.arsc.edu/~clark/sun/PkgAnalyze.html an invaluable resource for Solaris 8 users. Seems like it is regularly updated as well, las update last update: 2006-04-24! On 11/8/06, Dennis Clarke wrote: > > > On 08/11/06, 07:48:09, Cory Omand wrote regarding > > Re: [csw-users] netsnmp install issues: > > > >> On 11/7/06, Amit wrote: > >> [snip] > >> > ERROR: no info for SUNWpiclu. Cannot install dependancy. > >> > ERROR: could not install required dependancies for CSWnetsnmp > >> [snip] > >> > > >> > Any suggestions or help would be greatly appreciated. > >> > > > > >> This package comes in a patch > > > > Please will someone tell us which? > > > > Sunsolve is our friend ... let me do a search. > > dclarke > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From amit.uttam at gmail.com Thu Nov 9 03:22:30 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 8 Nov 2006 18:22:30 -0800 Subject: [csw-users] Firefox 1.5.0.7 bugs Message-ID: <90ee5fbb0611081822k6c0b22b2l8f3d2f093adde932@mail.gmail.com> Hey guys, I noticed a few odd bugs in Firefox 1.5.0.7 for Sparc. To reproduce: 1) In Bugzilla 2.22, perform a random search. 2) In the search page, click on the 'Change Columns' link. 3) Modify a few settings and save the changes by clicking 'Change Columns'. 4) Firefox then exits without prompt. Additional Info: bash-3.1$ uname -a SunOS sun1 5.8 Generic_117350-41 sun4u sparc SUNW,Ultra-5_10 bash-3.1$ Do any of you guys have this problem. I was not sure if should post this in the Firefox bugzilla page so I though to check if anyone was experiencing similar issues. Thanks, Amit From amit.uttam at gmail.com Thu Nov 9 03:29:36 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 8 Nov 2006 18:29:36 -0800 Subject: [csw-users] Firefox 1.5.0.7 bugs Message-ID: <90ee5fbb0611081829t792b8894gbdd65b9b9c0e3966@mail.gmail.com> Hmm... Did some testing with the latest bugzilla CVS found at http://landfill.bugzilla.org/bugzilla-tip/ and everything seems to work fine. Interesting.... From dclarke at blastwave.org Thu Nov 9 03:39:23 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Wed, 8 Nov 2006 21:39:23 -0500 (EST) Subject: [csw-users] Firefox 1.5.0.7 bugs In-Reply-To: <90ee5fbb0611081829t792b8894gbdd65b9b9c0e3966@mail.gmail.com> References: <90ee5fbb0611081829t792b8894gbdd65b9b9c0e3966@mail.gmail.com> Message-ID: <47310.24.146.17.108.1163039963.squirrel@mail.blastwave.org> > Hmm... > > Did some testing with the latest bugzilla CVS found at > http://landfill.bugzilla.org/bugzilla-tip/ and everything seems to > work fine. > > Interesting.... Its somewhat tough to repeat. I tried the exact same thing here with a Sparc server and .. no problem. it was a transient .. dunno really. Dennis From james at blastwave.org Thu Nov 9 10:31:35 2006 From: james at blastwave.org (James Lee) Date: Thu, 09 Nov 2006 09:31:35 GMT Subject: [csw-users] netsnmp install issues In-Reply-To: <90ee5fbb0611081218t53ff840auda6f1f3a1c2476c@mail.gmail.com> References: <90ee5fbb0611071944q4cc37637s2df5a359c9ad0897@mail.gmail.com> <20061108.9314700.1726629784@gyor.asd.demon.co.uk> <64391.24.146.17.108.1162999891.squirrel@mail.blastwave.org> <90ee5fbb0611081218t53ff840auda6f1f3a1c2476c@mail.gmail.com> Message-ID: <20061109.9313500.3120927764@gyor.asd.demon.co.uk> On 08/11/06, 20:18:55, Amit wrote regarding Re: [csw-users] netsnmp install issues: > Here's what I dug up: > # PICL: Platform Information and Control Library > # PICL daemon stores and retrieves platform-specific device data. > SUNWpiclr PICL framework [r] > SUNWpiclh PICL header files > SUNWpiclu PICL libraries and plugins > SUNWpiclx PICL libraries (64-bit) Those are packages, not patches. > On 11/8/06, Dennis Clarke wrote: > > > > > On 08/11/06, 07:48:09, Cory Omand wrote regarding > > > Re: [csw-users] netsnmp install issues: > > > > > >> On 11/7/06, Amit wrote: > > >> [snip] > > >> > ERROR: no info for SUNWpiclu. Cannot install dependancy. > > >> > ERROR: could not install required dependancies for CSWnetsnmp > > >> [snip] > > >> > > > >> > Any suggestions or help would be greatly appreciated. > > >> > > > > > > >> This package comes in a patch > > > > > > Please will someone tell us which? > > > > > > > Sunsolve is our friend ... let me do a search. It's no friend of mine. I await info on patch number. From james at blastwave.org Thu Nov 9 10:31:35 2006 From: james at blastwave.org (James Lee) Date: Thu, 09 Nov 2006 09:31:35 GMT Subject: [csw-users] pkg-get help In-Reply-To: <20061108195821.94045.qmail@web56606.mail.re3.yahoo.com> References: <20061108195821.94045.qmail@web56606.mail.re3.yahoo.com> Message-ID: <20061109.9313500.1957257054@gyor.asd.demon.co.uk> On 08/11/06, 19:58:21, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > Thank you for your reply, but this did not fix my problem. > I still receive the same error when trying to execute pkg-get. > Any other suggestions or ideas?? No, investigate the same suggestion. > James Lee wrote: On 08/11/06, 17:48:52, Oldwen Adriano wrote > regarding Re: [csw-users] pkg-get help: > > #: / -> pkg-get -i wget > > WARNING: gpg not found > > NOTE: To have checksums compared, you must install one of: > > md5 or gmd5sum (gmd5sum is available with GNU textutils) > > try 'pkg-get install textutils' > > WARNING: no catalog file for site ftp.math.purdue.edu > > Updating catalog file first > > Getting catalog... > > /opt/csw/bin/pkg-get: wget: cannot execute Exactly the message I'm expect from pkg-get if wget did not have execute permission. Do some debugging, set the -x flag in pkg-get, etc. Find out why wget is not executing. James. From magrawal at coba.usf.edu Thu Nov 9 17:44:30 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 11:44:30 -0500 Subject: [csw-users] Per user directories Message-ID: I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: -bash-3.00# svcs -a | grep apa legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache disabled 17:22:58 svc:/network/http:apache2 online 11:29:36 svc:/network/http:cswapache2 In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: Include etc/extra/httpd-userdir.conf. I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: -bash-3.00$ pwd /home/ecomStudent/public_html -bash-3.00$ ls -al total 6 drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html However, when I try to access the file: http://ecom.ismlab.usf.edu/~ecomStudent/ I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. What else do I need to do to get per-user directories? Thanks -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From eric.enright at gmail.com Thu Nov 9 18:05:05 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 12:05:05 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: Message-ID: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> On 11/9/06, Manish Agrawal wrote: > I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > > -bash-3.00# svcs -a | grep apa > legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > disabled 17:22:58 svc:/network/http:apache2 > online 11:29:36 svc:/network/http:cswapache2 > > In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > Include etc/extra/httpd-userdir.conf. > > I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > > -bash-3.00$ pwd > /home/ecomStudent/public_html > -bash-3.00$ ls -al > total 6 > drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > > However, when I try to access the file: > http://ecom.ismlab.usf.edu/~ecomStudent/ > > I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. public_html needs execute permissions for group and other. -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 18:12:56 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 12:12:56 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> Message-ID: I had tried that before, and have done it again, but it does not help: -bash-3.00$ ls -al | grep public_html drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html http://ecom.ismlab.usf.edu/~ecomStudent Thanks Manish On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > On 11/9/06, Manish Agrawal wrote: >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> -bash-3.00# svcs -a | grep apa >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> disabled 17:22:58 svc:/network/http:apache2 >> online 11:29:36 svc:/network/http:cswapache2 >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> Include etc/extra/httpd-userdir.conf. >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> -bash-3.00$ pwd >> /home/ecomStudent/public_html >> -bash-3.00$ ls -al >> total 6 >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> However, when I try to access the file: >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > > public_html needs execute permissions for group and other. > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From magrawal at coba.usf.edu Thu Nov 9 18:47:18 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 12:47:18 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> Message-ID: To follow up, I created a user "temp" with a public_html directory and an index.html in the public_html directory, but http://ecom.ismlab.usf.edu/~temp does not work. Also, the directories are actually in /export/home/temp, but I am also able to get to them as /home/temp. I could send the uname/ passwd offline if it helps. Thanks Manish On Thu, 09 Nov 2006 12:12:56 -0500, Manish Agrawal wrote: > I had tried that before, and have done it again, but it does not help: > > -bash-3.00$ ls -al | grep public_html > drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > > http://ecom.ismlab.usf.edu/~ecomStudent > > Thanks > Manish > > On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > >> On 11/9/06, Manish Agrawal wrote: >>> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >>> >>> -bash-3.00# svcs -a | grep apa >>> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >>> disabled 17:22:58 svc:/network/http:apache2 >>> online 11:29:36 svc:/network/http:cswapache2 >>> >>> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >>> Include etc/extra/httpd-userdir.conf. >>> >>> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >>> >>> -bash-3.00$ pwd >>> /home/ecomStudent/public_html >>> -bash-3.00$ ls -al >>> total 6 >>> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >>> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >>> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >>> >>> However, when I try to access the file: >>> http://ecom.ismlab.usf.edu/~ecomStudent/ >>> >>> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> >> public_html needs execute permissions for group and other. >> > > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From eric.enright at gmail.com Thu Nov 9 18:50:35 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 12:50:35 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> Message-ID: <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> On 11/9/06, Manish Agrawal wrote: > I had tried that before, and have done it again, but it does not help: > > -bash-3.00$ ls -al | grep public_html > drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > > http://ecom.ismlab.usf.edu/~ecomStudent eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ Works for me. Can you access any of the files inside of this directory by typing it's URL? Regards, Eric > > Thanks > Manish > > On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > > > On 11/9/06, Manish Agrawal wrote: > >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > >> > >> -bash-3.00# svcs -a | grep apa > >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > >> disabled 17:22:58 svc:/network/http:apache2 > >> online 11:29:36 svc:/network/http:cswapache2 > >> > >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > >> Include etc/extra/httpd-userdir.conf. > >> > >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > >> > >> -bash-3.00$ pwd > >> /home/ecomStudent/public_html > >> -bash-3.00$ ls -al > >> total 6 > >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > >> > >> However, when I try to access the file: > >> http://ecom.ismlab.usf.edu/~ecomStudent/ > >> > >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > > > > public_html needs execute permissions for group and other. > > > > > > -- > Manish Agrawal > Asstt. Prof., Dept. of ISDS, Univ. of South Florida > 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 19:20:59 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 13:20:59 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> Message-ID: Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html Now, temp works: http://ecom.ismlab.usf.edu/~temp but my old account still does not work: http://ecom.ismlab.usf.edu/~ecomStudent All permissions in all directory pairs are identical: -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. -bash-3.00$ ls -al /home total 5 dr-xr-xr-x 2 root root 2 Nov 9 11:13 . drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent Thanks Manish On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: > On 11/9/06, Manish Agrawal wrote: >> I had tried that before, and have done it again, but it does not help: >> >> -bash-3.00$ ls -al | grep public_html >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html >> >> http://ecom.ismlab.usf.edu/~ecomStudent > > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ > > Works for me. Can you access any of the files inside of this > directory by typing it's URL? > > Regards, > Eric > >> >> Thanks >> Manish >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: >> >> > On 11/9/06, Manish Agrawal wrote: >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> >> >> -bash-3.00# svcs -a | grep apa >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> >> disabled 17:22:58 svc:/network/http:apache2 >> >> online 11:29:36 svc:/network/http:cswapache2 >> >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> >> Include etc/extra/httpd-userdir.conf. >> >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> >> >> -bash-3.00$ pwd >> >> /home/ecomStudent/public_html >> >> -bash-3.00$ ls -al >> >> total 6 >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> >> >> However, when I try to access the file: >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> > >> > public_html needs execute permissions for group and other. >> > >> >> >> >> -- >> Manish Agrawal >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users >> > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From wschaub at steubentech.com Thu Nov 9 20:08:34 2006 From: wschaub at steubentech.com (William Schaub) Date: Thu, 09 Nov 2006 14:08:34 -0500 Subject: [csw-users] Source code changes/Compilation procedures Message-ID: <45537CB2.7020903@steubentech.com> I am quite a fan of blastwave so far. however there is one thing it seems to lack and I wonder if i could get an answer to this one question. Is there a way to get a diff of the source code for each package showing what was changed to make the package compile? perhaps something like a simple diff file + the maintainers notes on successfully building a project? this is something I have very much missed with stuff like FreeBSD ports etc. because even though I like using binary packages and blastwave is of course a binary package distribution, some times I might want to build one of the blastwave packages from source with perhaps different compile time options, or even just to put it into its own place in /opt and have it separate from blastwave all together. But As I am sure you all know many open source packages are not that easy to build under Solaris and it would be so nice to be able to benefit from the work that the CSW maintainers have already done in getting those few packages built under Solaris. It would also be very helpful to the authors of the Open Source software since they can see the patches necessary for making their code work under Solaris. It would be nice if there were a few files distributed with the package itself possibly under /opt/CSW/share/doc/pkgname/ 1. A file describing the source versions used to build the package and any special procedures needed to make the project build. 2. a diff file suitable to be used with the GNU patch program to apply any modifications the package maintainer needed to do to the source to make the blastwave package. A similar approach was used in a binary package distribution for IRIX called nekoware. which is still active. check out their packaging guide at: http://forums.nekochan.net/viewtopic.php?t=3872 the part where it discusses compilation notes and a patch file is in the packaging section. I believe if this were done with Blastwave it would only serve to improve an already great service to the Solaris community. From a.cervellin at acm.org Thu Nov 9 20:10:43 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Thu, 09 Nov 2006 20:10:43 +0100 Subject: [csw-users] Source code changes/Compilation procedures In-Reply-To: <45537CB2.7020903@steubentech.com> References: <45537CB2.7020903@steubentech.com> Message-ID: <45537D33.6030504@acm.org> William Schaub wrote: > Is there a way to get a diff of the source code for each package showing > what was changed to make the package compile? perhaps something like a > simple diff file + the maintainers notes on successfully building a project? there are works in progress, take a look here: http://svn.blastwave.org/ From eric.enright at gmail.com Thu Nov 9 20:12:02 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 14:12:02 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> Message-ID: <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> On 11/9/06, Manish Agrawal wrote: > Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html > > Now, temp works: > http://ecom.ismlab.usf.edu/~temp > > but my old account still does not work: > http://ecom.ismlab.usf.edu/~ecomStudent > > All permissions in all directory pairs are identical: > -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html > drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent > drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html > drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp > drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html > > Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. Hmm, now I'm a little confused as to why it doesn't work. As for /home, directories get mounted there by the automounter. See /etc/auto_home. SMC probably created an entry in there, while useradd certainly does not. What are the user's home directories set to in /etc/passwd? Eric > -bash-3.00$ ls -al /home > total 5 > dr-xr-xr-x 2 root root 2 Nov 9 11:13 . > drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. > drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent > > Thanks > Manish > > > On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: > > > On 11/9/06, Manish Agrawal wrote: > >> I had tried that before, and have done it again, but it does not help: > >> > >> -bash-3.00$ ls -al | grep public_html > >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > >> > >> http://ecom.ismlab.usf.edu/~ecomStudent > > > > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html > > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ > > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ > > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ > > > > Works for me. Can you access any of the files inside of this > > directory by typing it's URL? > > > > Regards, > > Eric > > > >> > >> Thanks > >> Manish > >> > >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > >> > >> > On 11/9/06, Manish Agrawal wrote: > >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > >> >> > >> >> -bash-3.00# svcs -a | grep apa > >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > >> >> disabled 17:22:58 svc:/network/http:apache2 > >> >> online 11:29:36 svc:/network/http:cswapache2 > >> >> > >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > >> >> Include etc/extra/httpd-userdir.conf. > >> >> > >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > >> >> > >> >> -bash-3.00$ pwd > >> >> /home/ecomStudent/public_html > >> >> -bash-3.00$ ls -al > >> >> total 6 > >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > >> >> > >> >> However, when I try to access the file: > >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ > >> >> > >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > >> > > >> > public_html needs execute permissions for group and other. > >> > > >> > >> > >> > >> -- > >> Manish Agrawal > >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida > >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > >> _______________________________________________ > >> users mailing list > >> users at lists.blastwave.org > >> https://lists.blastwave.org/mailman/listinfo/users > >> > > > > > > > > -- > Manish Agrawal > Asstt. Prof., Dept. of ISDS, Univ. of South Florida > 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 20:16:15 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 14:16:15 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> Message-ID: -bash-3.00# cat /etc/passwd root:x:0:0:Super-User:/root:/usr/bin/bash daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: ecomStudent:x:100:10::/home/ecomStudent:/usr/bin/bash mysql:x:101:101::/opt/csw/mysql5:/bin/false temp:x:102:1::/export/home/temp:/usr/bin/bash Thanks Manish On Thu, 09 Nov 2006 14:12:02 -0500, Eric Enright wrote: > On 11/9/06, Manish Agrawal wrote: >> Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html >> >> Now, temp works: >> http://ecom.ismlab.usf.edu/~temp >> >> but my old account still does not work: >> http://ecom.ismlab.usf.edu/~ecomStudent >> >> All permissions in all directory pairs are identical: >> -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent >> drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html >> drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp >> drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html >> >> Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. > > Hmm, now I'm a little confused as to why it doesn't work. As for > /home, directories get mounted there by the automounter. See > /etc/auto_home. SMC probably created an entry in there, while useradd > certainly does not. > > What are the user's home directories set to in /etc/passwd? > > Eric > > >> -bash-3.00$ ls -al /home >> total 5 >> dr-xr-xr-x 2 root root 2 Nov 9 11:13 . >> drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent >> >> Thanks >> Manish >> >> >> On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: >> >> > On 11/9/06, Manish Agrawal wrote: >> >> I had tried that before, and have done it again, but it does not help: >> >> >> >> -bash-3.00$ ls -al | grep public_html >> >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html >> >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent >> > >> > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html >> > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ >> > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ >> > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ >> > >> > Works for me. Can you access any of the files inside of this >> > directory by typing it's URL? >> > >> > Regards, >> > Eric >> > >> >> >> >> Thanks >> >> Manish >> >> >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: >> >> >> >> > On 11/9/06, Manish Agrawal wrote: >> >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> >> >> >> >> -bash-3.00# svcs -a | grep apa >> >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> >> >> disabled 17:22:58 svc:/network/http:apache2 >> >> >> online 11:29:36 svc:/network/http:cswapache2 >> >> >> >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> >> >> Include etc/extra/httpd-userdir.conf. >> >> >> >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> >> >> >> >> -bash-3.00$ pwd >> >> >> /home/ecomStudent/public_html >> >> >> -bash-3.00$ ls -al >> >> >> total 6 >> >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> >> >> >> >> However, when I try to access the file: >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> >> >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> >> > >> >> > public_html needs execute permissions for group and other. >> >> > >> >> >> >> >> >> >> >> -- >> >> Manish Agrawal >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> >> _______________________________________________ >> >> users mailing list >> >> users at lists.blastwave.org >> >> https://lists.blastwave.org/mailman/listinfo/users >> >> >> > >> > >> >> >> >> -- >> Manish Agrawal >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users >> > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From eric.enright at gmail.com Thu Nov 9 20:25:42 2006 From: eric.enright at gmail.com (Eric Enright) Date: Thu, 9 Nov 2006 14:25:42 -0500 Subject: [csw-users] Per user directories In-Reply-To: References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> Message-ID: <3a74b99d0611091125i2db10cabg44f62d3f48699ed7@mail.gmail.com> While logged in as temp, can you get to /home/ecomStudent/public_html? Eric On 11/9/06, Manish Agrawal wrote: > -bash-3.00# cat /etc/passwd > root:x:0:0:Super-User:/root:/usr/bin/bash > daemon:x:1:1::/: > bin:x:2:2::/usr/bin: > sys:x:3:3::/: > adm:x:4:4:Admin:/var/adm: > lp:x:71:8:Line Printer Admin:/usr/spool/lp: > uucp:x:5:5:uucp Admin:/usr/lib/uucp: > nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico > smmsp:x:25:25:SendMail Message Submission Program:/: > listen:x:37:4:Network Admin:/usr/net/nls: > gdm:x:50:50:GDM Reserved UID:/: > webservd:x:80:80:WebServer Reserved UID:/: > nobody:x:60001:60001:NFS Anonymous Access User:/: > noaccess:x:60002:60002:No Access User:/: > nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: > ecomStudent:x:100:10::/home/ecomStudent:/usr/bin/bash > mysql:x:101:101::/opt/csw/mysql5:/bin/false > temp:x:102:1::/export/home/temp:/usr/bin/bash > > Thanks > Manish > > On Thu, 09 Nov 2006 14:12:02 -0500, Eric Enright wrote: > > > On 11/9/06, Manish Agrawal wrote: > >> Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html > >> > >> Now, temp works: > >> http://ecom.ismlab.usf.edu/~temp > >> > >> but my old account still does not work: > >> http://ecom.ismlab.usf.edu/~ecomStudent > >> > >> All permissions in all directory pairs are identical: > >> -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html > >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent > >> drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html > >> drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp > >> drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html > >> > >> Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. > > > > Hmm, now I'm a little confused as to why it doesn't work. As for > > /home, directories get mounted there by the automounter. See > > /etc/auto_home. SMC probably created an entry in there, while useradd > > certainly does not. > > > > What are the user's home directories set to in /etc/passwd? > > > > Eric > > > > > >> -bash-3.00$ ls -al /home > >> total 5 > >> dr-xr-xr-x 2 root root 2 Nov 9 11:13 . > >> drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. > >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent > >> > >> Thanks > >> Manish > >> > >> > >> On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: > >> > >> > On 11/9/06, Manish Agrawal wrote: > >> >> I had tried that before, and have done it again, but it does not help: > >> >> > >> >> -bash-3.00$ ls -al | grep public_html > >> >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html > >> >> > >> >> http://ecom.ismlab.usf.edu/~ecomStudent > >> > > >> > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html > >> > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ > >> > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ > >> > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ > >> > > >> > Works for me. Can you access any of the files inside of this > >> > directory by typing it's URL? > >> > > >> > Regards, > >> > Eric > >> > > >> >> > >> >> Thanks > >> >> Manish > >> >> > >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: > >> >> > >> >> > On 11/9/06, Manish Agrawal wrote: > >> >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: > >> >> >> > >> >> >> -bash-3.00# svcs -a | grep apa > >> >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache > >> >> >> disabled 17:22:58 svc:/network/http:apache2 > >> >> >> online 11:29:36 svc:/network/http:cswapache2 > >> >> >> > >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: > >> >> >> Include etc/extra/httpd-userdir.conf. > >> >> >> > >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: > >> >> >> > >> >> >> -bash-3.00$ pwd > >> >> >> /home/ecomStudent/public_html > >> >> >> -bash-3.00$ ls -al > >> >> >> total 6 > >> >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . > >> >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. > >> >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html > >> >> >> > >> >> >> However, when I try to access the file: > >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ > >> >> >> > >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. > >> >> > > >> >> > public_html needs execute permissions for group and other. > >> >> > > >> >> > >> >> > >> >> > >> >> -- > >> >> Manish Agrawal > >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida > >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > >> >> _______________________________________________ > >> >> users mailing list > >> >> users at lists.blastwave.org > >> >> https://lists.blastwave.org/mailman/listinfo/users > >> >> > >> > > >> > > >> > >> > >> > >> -- > >> Manish Agrawal > >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida > >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > >> _______________________________________________ > >> users mailing list > >> users at lists.blastwave.org > >> https://lists.blastwave.org/mailman/listinfo/users > >> > > > > > > > > -- > Manish Agrawal > Asstt. Prof., Dept. of ISDS, Univ. of South Florida > 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. > (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu > http://coba.usf.edu/departments/isds/faculty/agrawal/index.html > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > -- Eric Enright From magrawal at coba.usf.edu Thu Nov 9 21:25:05 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Thu, 09 Nov 2006 15:25:05 -0500 Subject: [csw-users] Per user directories In-Reply-To: <3a74b99d0611091125i2db10cabg44f62d3f48699ed7@mail.gmail.com> References: <3a74b99d0611090905t5f953975jc6f1374ac0810e7c@mail.gmail.com> <3a74b99d0611090950u75ac0336ta9e30a16efd195e@mail.gmail.com> <3a74b99d0611091112x1b82398o53887d4a2092b3d7@mail.gmail.com> <3a74b99d0611091125i2db10cabg44f62d3f48699ed7@mail.gmail.com> Message-ID: You mean: -bash-3.00$ su - temp Password: Sun Microsystems Inc. SunOS 5.10 Generic January 2005 -bash-3.00$ pwd /export/home/temp -bash-3.00$ ls -al /home/ecomStudent/public_html/ total 8 drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 . drwxr-xr-x 15 ecomStudent staff 1536 Nov 9 14:59 .. -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html -bash-3.00$ Thanks Manish On Thu, 09 Nov 2006 14:25:42 -0500, Eric Enright wrote: > While logged in as temp, can you get to /home/ecomStudent/public_html? > > Eric > > > On 11/9/06, Manish Agrawal wrote: >> -bash-3.00# cat /etc/passwd >> root:x:0:0:Super-User:/root:/usr/bin/bash >> daemon:x:1:1::/: >> bin:x:2:2::/usr/bin: >> sys:x:3:3::/: >> adm:x:4:4:Admin:/var/adm: >> lp:x:71:8:Line Printer Admin:/usr/spool/lp: >> uucp:x:5:5:uucp Admin:/usr/lib/uucp: >> nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico >> smmsp:x:25:25:SendMail Message Submission Program:/: >> listen:x:37:4:Network Admin:/usr/net/nls: >> gdm:x:50:50:GDM Reserved UID:/: >> webservd:x:80:80:WebServer Reserved UID:/: >> nobody:x:60001:60001:NFS Anonymous Access User:/: >> noaccess:x:60002:60002:No Access User:/: >> nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: >> ecomStudent:x:100:10::/home/ecomStudent:/usr/bin/bash >> mysql:x:101:101::/opt/csw/mysql5:/bin/false >> temp:x:102:1::/export/home/temp:/usr/bin/bash >> >> Thanks >> Manish >> >> On Thu, 09 Nov 2006 14:12:02 -0500, Eric Enright wrote: >> >> > On 11/9/06, Manish Agrawal wrote: >> >> Thanks, I went back and changed /opt/csw/apache2/etc/extras/http-userdir.conf and changed the directory for permisssions from /home/*/public_html to /export/home/*/public_html >> >> >> >> Now, temp works: >> >> http://ecom.ismlab.usf.edu/~temp >> >> >> >> but my old account still does not work: >> >> http://ecom.ismlab.usf.edu/~ecomStudent >> >> >> >> All permissions in all directory pairs are identical: >> >> -bash-3.00$ ls -ld /export/home/temp /export/home/ecomStudent /export/home/temp/public_html /export/home/ecomStudent/public_html >> >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 /export/home/ecomStudent >> >> drwxrwxrwx 2 ecomStudent staff 512 Nov 9 11:41 /export/home/ecomStudent/public_html >> >> drwxr-xr-x 3 temp other 512 Nov 9 12:40 /export/home/temp >> >> drwxrwxrwx 3 temp other 512 Nov 9 12:43 /export/home/temp/public_html >> >> >> >> Also, now I am a little confused because useradd never created any link or reference (or whatever is in /home) for /home/temp. I had created the ecomStudent account using the Solaris management console and temp account using useradd. >> > >> > Hmm, now I'm a little confused as to why it doesn't work. As for >> > /home, directories get mounted there by the automounter. See >> > /etc/auto_home. SMC probably created an entry in there, while useradd >> > certainly does not. >> > >> > What are the user's home directories set to in /etc/passwd? >> > >> > Eric >> > >> > >> >> -bash-3.00$ ls -al /home >> >> total 5 >> >> dr-xr-xr-x 2 root root 2 Nov 9 11:13 . >> >> drwxr-xr-x 28 root root 1024 Nov 9 13:08 .. >> >> drwxr-xr-x 15 ecomStudent staff 1024 Nov 9 11:18 ecomStudent >> >> >> >> Thanks >> >> Manish >> >> >> >> >> >> On Thu, 09 Nov 2006 12:50:35 -0500, Eric Enright wrote: >> >> >> >> > On 11/9/06, Manish Agrawal wrote: >> >> >> I had tried that before, and have done it again, but it does not help: >> >> >> >> >> >> -bash-3.00$ ls -al | grep public_html >> >> >> drwxr-xr-x 2 ecomStudent staff 512 Nov 9 11:41 public_html >> >> >> >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent >> >> > >> >> > eric at dantrag:~ $ ls -ld /home /home/eric /home/eric/public_html >> >> > drwxr-xr-x 11 root root 512 Sep 7 21:19 /home/ >> >> > drwx--x--x 85 eric other 5120 Nov 3 20:40 /home/eric/ >> >> > drwxr-xr-x 25 eric other 3584 Nov 8 00:35 /home/eric/public_html/ >> >> > >> >> > Works for me. Can you access any of the files inside of this >> >> > directory by typing it's URL? >> >> > >> >> > Regards, >> >> > Eric >> >> > >> >> >> >> >> >> Thanks >> >> >> Manish >> >> >> >> >> >> On Thu, 09 Nov 2006 12:05:05 -0500, Eric Enright wrote: >> >> >> >> >> >> > On 11/9/06, Manish Agrawal wrote: >> >> >> >> I am trying to get per-user directories in Apache2 (Solaris x86). I have cswapache2 running: >> >> >> >> >> >> >> >> -bash-3.00# svcs -a | grep apa >> >> >> >> legacy_run 17:23:56 lrc:/etc/rc3_d/S50apache >> >> >> >> disabled 17:22:58 svc:/network/http:apache2 >> >> >> >> online 11:29:36 svc:/network/http:cswapache2 >> >> >> >> >> >> >> >> In /opt/csw/apache2/etc/httpd.conf, I have uncommented line 457: >> >> >> >> Include etc/extra/httpd-userdir.conf. >> >> >> >> >> >> >> >> I had an existing account called ecomStudent on the machine. I created a directory public_html in the home directory (/home/ecomStudent) and put an index.html file in the public_html directory: >> >> >> >> >> >> >> >> -bash-3.00$ pwd >> >> >> >> /home/ecomStudent/public_html >> >> >> >> -bash-3.00$ ls -al >> >> >> >> total 6 >> >> >> >> drwxr--r-- 2 ecomStudent staff 512 Nov 9 11:41 . >> >> >> >> drwxr-x--- 15 ecomStudent staff 1024 Nov 9 11:18 .. >> >> >> >> -rw-r--r-- 1 ecomStudent staff 64 Nov 9 11:41 index.html >> >> >> >> >> >> >> >> However, when I try to access the file: >> >> >> >> http://ecom.ismlab.usf.edu/~ecomStudent/ >> >> >> >> >> >> >> >> I get a 403 Forbidden error: You don't have permission to access /~ecomStudent/ on this server. >> >> >> > >> >> >> > public_html needs execute permissions for group and other. >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> Manish Agrawal >> >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> >> >> _______________________________________________ >> >> >> users mailing list >> >> >> users at lists.blastwave.org >> >> >> https://lists.blastwave.org/mailman/listinfo/users >> >> >> >> >> > >> >> > >> >> >> >> >> >> >> >> -- >> >> Manish Agrawal >> >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> >> _______________________________________________ >> >> users mailing list >> >> users at lists.blastwave.org >> >> https://lists.blastwave.org/mailman/listinfo/users >> >> >> > >> > >> >> >> >> -- >> Manish Agrawal >> Asstt. Prof., Dept. of ISDS, Univ. of South Florida >> 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. >> (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu >> http://coba.usf.edu/departments/isds/faculty/agrawal/index.html >> _______________________________________________ >> users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users >> > > -- Manish Agrawal Asstt. Prof., Dept. of ISDS, Univ. of South Florida 4202 E. Fowler Ave., CIS 1040, Tampa, Fl 33620 - 7800, U.S.A. (813)-974-6716 (W) 974-6749 (FAX) magrawal at coba.usf.edu http://coba.usf.edu/departments/isds/faculty/agrawal/index.html From oldwenstyle at yahoo.com Fri Nov 10 18:19:56 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Fri, 10 Nov 2006 09:19:56 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <20061108.18021700.889439035@gyor.asd.demon.co.uk> Message-ID: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> James, I really don't know a whole lot about Unix in general... I am trying to develop a PHP website, but I don't have gcc or PHP installed. I was hoping to accomplish this through pkg-get, but no success yet. I don't really know how to trouble shoot to make sure wget is an executable. I did apply the chmod command you gave me, but I still get an error. What can you tell me or help me with to understand how to accomplish my goal? Thank you for your help. Oldwen James Lee wrote: On 08/11/06, 17:48:52, Oldwen Adriano wrote regarding Re: [csw-users] pkg-get help: > #: / -> pkg-get -i wget > WARNING: gpg not found > NOTE: To have checksums compared, you must install one of: > md5 or gmd5sum (gmd5sum is available with GNU textutils) > try 'pkg-get install textutils' > WARNING: no catalog file for site ftp.math.purdue.edu > Updating catalog file first > Getting catalog... > /opt/csw/bin/pkg-get: wget: cannot execute This is another problem, I thought we'd do the top one first. I think you need: $ chmod +x /tmp/wget/wget _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From Darin.Perusich at cognigencorp.com Fri Nov 10 19:01:43 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Fri, 10 Nov 2006 13:01:43 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: <4554BE87.8090806@cognigencorp.com> which version of solaris are you running, "uname -a"? if you are running solaris 9 or 10 then wget is on the installation media that you used to install solaris, the wget package is SUNWwgetu and it installs in /usr/sfw/bin. do "ls -l /tmp/wget/wget" and email the output back to the list. Oldwen Adriano wrote: > James, > > I really don't know a whole lot about Unix in general... I am trying > to develop a PHP website, but I don't have gcc or PHP installed. I > was hoping to accomplish this through pkg-get, but no success yet. I > don't really know how to trouble shoot to make sure wget is an > executable. I did apply the chmod command you gave me, but I still > get an error. What can you tell me or help me with to understand how > to accomplish my goal? Thank you for your help. > > Oldwen > > James Lee wrote: On 08/11/06, 17:48:52, Oldwen > Adriano wrote regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have >> checksums compared, you must install one of: md5 or gmd5sum >> (gmd5sum is available with GNU textutils) try 'pkg-get install >> textutils' WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. I think > you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > > ------------------------------------------------------------------------ > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From magrawal at coba.usf.edu Sat Nov 11 04:53:52 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Fri, 10 Nov 2006 22:53:52 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: If you have Solaris 10 and have setup blastwave as per http://www.blastwave.org/howto.html Setting up SAMP (Solaris, Apache, MySQL, PHP) is easy. Just give the following commands: pkg-get install apache2 pkg-get install mysql5 pkg-get install php5 pkg-get install php5_mysql pkg-get install ap2_modphp5 svcadm disable apache2 You will then have to complete step 5 (for MySQL) at Neal Pollack's weblog http://blogs.sun.com/nealix/entry/samp_solaris_apache_2_mysql It really is rather easy. Manish On Fri, 10 Nov 2006 12:19:56 -0500, Oldwen Adriano wrote: > James, > I really don't know a whole lot about Unix in general... I am trying to develop a PHP website, but I don't have gcc or PHP installed. I was hoping to accomplish this through pkg-get, but no success yet. I don't really know how to trouble shoot to make sure wget is an executable. I did apply the chmod command you gave me, but I still get an error. What can you tell me or help me with to understand how to accomplish my goal? Thank you for your help. > Oldwen > > James Lee wrote: > On 08/11/06, 17:48:52, Oldwen Adriano wrote > regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget >> WARNING: gpg not found >> NOTE: To have checksums compared, you must install one of: >> md5 or gmd5sum (gmd5sum is available with GNU textutils) >> try 'pkg-get install textutils' >> WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first >> Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. > I think you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com From magrawal at coba.usf.edu Sat Nov 11 17:19:16 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Sat, 11 Nov 2006 11:19:16 -0500 Subject: [csw-users] Update Solaris 10 In-Reply-To: References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: How do you update a Solaris 10 x86 machine to apply all security patches? Is there a command like "patch all" or something that will figure out which patched are needed and apply them? Thanks Manish From a.cervellin at acm.org Sat Nov 11 18:11:09 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Sat, 11 Nov 2006 18:11:09 +0100 Subject: [csw-users] Update Solaris 10 In-Reply-To: References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> Message-ID: <4556042D.8080206@acm.org> Manish Agrawal wrote: > How do you update a Solaris 10 x86 machine to apply all security patches? > > Is there a command like "patch all" or something that will figure out which patched are needed and apply them? you have to download the "solaris 10 sun alert patch cluster" (or the full patch cluster) from here: http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access you need a sunsolve account and a valid service plan linked to it. once downloaded, unzip it and you'll find an installer script which will install all the patches. From amit.uttam at gmail.com Sat Nov 11 18:20:25 2006 From: amit.uttam at gmail.com (Amit) Date: Sat, 11 Nov 2006 09:20:25 -0800 Subject: [csw-users] Update Solaris 10 In-Reply-To: <4556042D.8080206@acm.org> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> <4556042D.8080206@acm.org> Message-ID: <90ee5fbb0611110920n1a1ceb58y386a66f9a5b1837a@mail.gmail.com> Hi, I do not use the official Sun Update from Sun as it is just a paint to set up and download. http://www.par.univie.ac.at/solaris/pca/ This is the best patch management system i've used. Very simple and straight forward. Check it out. On 11/11/06, Alessio Cervellin wrote: > Manish Agrawal wrote: > > How do you update a Solaris 10 x86 machine to apply all security patches? > > > > Is there a command like "patch all" or something that will figure out which patched are needed and apply them? > > you have to download the "solaris 10 sun alert patch cluster" (or the > full patch cluster) from here: > http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access > you need a sunsolve account and a valid service plan linked to it. > once downloaded, unzip it and you'll find an installer script which will > install all the patches. > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From pgress at optonline.net Sat Nov 11 18:25:20 2006 From: pgress at optonline.net (Paul Gress) Date: Sat, 11 Nov 2006 12:25:20 -0500 Subject: [csw-users] Update Solaris 10 In-Reply-To: <4556042D.8080206@acm.org> References: <20061110171956.71319.qmail@web56605.mail.re3.yahoo.com> <4556042D.8080206@acm.org> Message-ID: <45560780.5090806@optonline.net> Alessio Cervellin wrote: > Manish Agrawal wrote: > >> How do you update a Solaris 10 x86 machine to apply all security patches? >> >> Is there a command like "patch all" or something that will figure out which patched are needed and apply them? >> > > you have to download the "solaris 10 sun alert patch cluster" (or the > full patch cluster) from here: > http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access > you need a sunsolve account and a valid service plan linked to it. > once downloaded, unzip it and you'll find an installer script which will > install all the patches. > _______________________________________________ > If you looking for an automatic way: /usr/sbin/smpatch update -L A GUI way: /usr/bin/updatemanager And most users favorite way is using PCA. You need to download the script. http://www.par.univie.ac.at/solaris/pca/ While all these way include some recommended patched, it will include all security. From oldwenstyle at yahoo.com Mon Nov 13 16:43:44 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:43:44 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: Message-ID: <20061113154344.81350.qmail@web56612.mail.re3.yahoo.com> I have SunOS 5.8 which I assume is version 8. Manish Agrawal wrote: If you have Solaris 10 and have setup blastwave as per http://www.blastwave.org/howto.html Setting up SAMP (Solaris, Apache, MySQL, PHP) is easy. Just give the following commands: pkg-get install apache2 pkg-get install mysql5 pkg-get install php5 pkg-get install php5_mysql pkg-get install ap2_modphp5 svcadm disable apache2 You will then have to complete step 5 (for MySQL) at Neal Pollack's weblog http://blogs.sun.com/nealix/entry/samp_solaris_apache_2_mysql It really is rather easy. Manish On Fri, 10 Nov 2006 12:19:56 -0500, Oldwen Adriano wrote: > James, > I really don't know a whole lot about Unix in general... I am trying to develop a PHP website, but I don't have gcc or PHP installed. I was hoping to accomplish this through pkg-get, but no success yet. I don't really know how to trouble shoot to make sure wget is an executable. I did apply the chmod command you gave me, but I still get an error. What can you tell me or help me with to understand how to accomplish my goal? Thank you for your help. > Oldwen > > James Lee wrote: > On 08/11/06, 17:48:52, Oldwen Adriano wrote > regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget >> WARNING: gpg not found >> NOTE: To have checksums compared, you must install one of: >> md5 or gmd5sum (gmd5sum is available with GNU textutils) >> try 'pkg-get install textutils' >> WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first >> Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. > I think you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From oldwenstyle at yahoo.com Mon Nov 13 16:47:42 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:47:42 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <4554BE87.8090806@cognigencorp.com> Message-ID: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> #: / -> ls -l /tmp/wget/wget -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget #: / -> Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running solaris 9 or 10 then wget is on the installation media that you used to install solaris, the wget package is SUNWwgetu and it installs in /usr/sfw/bin. do "ls -l /tmp/wget/wget" and email the output back to the list. Oldwen Adriano wrote: > James, > > I really don't know a whole lot about Unix in general... I am trying > to develop a PHP website, but I don't have gcc or PHP installed. I > was hoping to accomplish this through pkg-get, but no success yet. I > don't really know how to trouble shoot to make sure wget is an > executable. I did apply the chmod command you gave me, but I still > get an error. What can you tell me or help me with to understand how > to accomplish my goal? Thank you for your help. > > Oldwen > > James Lee wrote: On 08/11/06, 17:48:52, Oldwen > Adriano wrote regarding Re: [csw-users] pkg-get help: > >> #: / -> pkg-get -i wget WARNING: gpg not found NOTE: To have >> checksums compared, you must install one of: md5 or gmd5sum >> (gmd5sum is available with GNU textutils) try 'pkg-get install >> textutils' WARNING: no catalog file for site ftp.math.purdue.edu >> Updating catalog file first Getting catalog... >> /opt/csw/bin/pkg-get: wget: cannot execute > > > This is another problem, I thought we'd do the top one first. I think > you need: > > $ chmod +x /tmp/wget/wget > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > > __________________________________________________ Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > > ------------------------------------------------------------------------ > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Want to start your own business? Learn how on Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Darin.Perusich at cognigencorp.com Mon Nov 13 16:52:04 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 10:52:04 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> Message-ID: <455894A4.7010001@cognigencorp.com> ok, do "/tmp/wget/wget --version" and email the output back to the list. this way we can see if wget is executing correctly. Oldwen Adriano wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > > Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running > solaris 9 or 10 then wget is on the installation media that you used to > install solaris, the wget package is SUNWwgetu and it installs in > /usr/sfw/bin. > > do "ls -l /tmp/wget/wget" and email the output back to the list. > -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From dclarke at blastwave.org Mon Nov 13 16:52:51 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 13 Nov 2006 10:52:51 -0500 (EST) Subject: [csw-users] pkg-get help In-Reply-To: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> Message-ID: <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > Dear Sir : I have been watching this thread for some time now. I feel that either I have made grave mistakes with the Blastwave HOWTO page or I have simply not stepped in soon enough to help you. First question I have for you is .. what sort of progress are you making? [ ] none - totally stalled [ ] little - I can't move forwards [ ] okay - I think I have it now ! [ ] done - that was easy Really, I clearly need to know if I need to tear down the HOWTO page and start over from scratch. Dennis Clarke dclarke at blastwave.org From oldwenstyle at yahoo.com Mon Nov 13 16:55:50 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:55:50 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <455894A4.7010001@cognigencorp.com> Message-ID: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> #: / -> /tmp/wget/wget --version ksh: /tmp/wget/wget: cannot execute #: / -> Darin Perusich wrote: ok, do "/tmp/wget/wget --version" and email the output back to the list. this way we can see if wget is executing correctly. Oldwen Adriano wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > > Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running > solaris 9 or 10 then wget is on the installation media that you used to > install solaris, the wget package is SUNWwgetu and it installs in > /usr/sfw/bin. > > do "ls -l /tmp/wget/wget" and email the output back to the list. > -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Everyone is raving about the all-new Yahoo! Mail beta. -------------- next part -------------- An HTML attachment was scrubbed... URL: From oldwenstyle at yahoo.com Mon Nov 13 16:57:15 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 07:57:15 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> Message-ID: <20061113155716.1899.qmail@web56615.mail.re3.yahoo.com> I have followed the directions on the "how to" page several times to no avail. Answer: little Dennis Clarke wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > Dear Sir : I have been watching this thread for some time now. I feel that either I have made grave mistakes with the Blastwave HOWTO page or I have simply not stepped in soon enough to help you. First question I have for you is .. what sort of progress are you making? [ ] none - totally stalled [ ] little - I can't move forwards [ ] okay - I think I have it now ! [ ] done - that was easy Really, I clearly need to know if I need to tear down the HOWTO page and start over from scratch. Dennis Clarke dclarke at blastwave.org _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Want to start your own business? Learn how on Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL: From EBradley at williams-int.com Mon Nov 13 17:03:58 2006 From: EBradley at williams-int.com (EBradley at williams-int.com) Date: Mon, 13 Nov 2006 11:03:58 -0500 Subject: [csw-users] pkg-get help Message-ID: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> >Really, I clearly need to know if I need to tear down the HOWTO page and >start over from scratch. I don't think that's necessary. I've used the HOWTO when setting up pkg-get at least 5 times over the past year when loading/reloading my Solaris 9 and/or 10 machine(s) here at work, with successful results each time. Evan Bradley ________________________________ From: users-bounces+ebradley=williams-int.com at lists.blastwave.org [mailto:users-bounces+ebradley=williams-int.com at lists.blastwave.org] On Behalf Of Oldwen Adriano Sent: Monday, November 13, 2006 10:57 AM To: questions and discussions Subject: Re: [csw-users] pkg-get help I have followed the directions on the "how to" page several times to no avail. Answer: little Dennis Clarke wrote: > #: / -> ls -l /tmp/wget/wget > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > #: / -> > > Dear Sir : I have been watching this thread for some time now. I feel that either I have made grave mistakes with the Blastwave HOWTO page or I have simply not stepped in soon enough to help you. First question I have for you is .. what sort of progress are you making? [ ] none - totally stalled [ ] little - I can't move forwards [ ] okay - I think I have it now ! [ ] done - that was easy Really, I clearly need to know if I need to tear down the HOWTO page and start over from scratch. Dennis Clarke dclarke at blastwave.org _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users ________________________________ Want to start your own business? Learn how on Yahoo! Small Business. From Darin.Perusich at cognigencorp.com Mon Nov 13 17:05:04 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 11:05:04 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> References: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> Message-ID: <455897B0.7020300@cognigencorp.com> the problem is the wget that you've downloaded, if it cannot execute then pkg-get will never work. you can download a working wget at this location: http://www.blastwave.org/wget-sparc.bin once you downloaded it, move it to /tmp/wget and continue to follow the HOWTO at http://www.blastwave.org/howto.html. Oldwen Adriano wrote: > #: / -> /tmp/wget/wget --version > ksh: /tmp/wget/wget: cannot execute > #: / -> > > Darin Perusich wrote: > ok, > > do "/tmp/wget/wget --version" and email the output back to the list. > this way we can see if wget is executing correctly. > > Oldwen Adriano wrote: >> #: / -> ls -l /tmp/wget/wget >> -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget >> #: / -> >> >> >> Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running >> solaris 9 or 10 then wget is on the installation media that you used to >> install solaris, the wget package is SUNWwgetu and it installs in >> /usr/sfw/bin. >> >> do "ls -l /tmp/wget/wget" and email the output back to the list. >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From Darin.Perusich at cognigencorp.com Mon Nov 13 17:08:53 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 11:08:53 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> Message-ID: <45589895.2090007@cognigencorp.com> dennis, they howto page is fine. what i think we should to is setup an ftp server so that users can easily get wget-sparc.bin and wget-i386.bin. we forget that a generic solaris installation doesn't really have a decient tool set for downloading files other then ftp. while netscape MIGHT be on the system the user may be using telnet/ssh to get into the machine or even worse logged in via the console. Dennis Clarke wrote: > > Dear Sir : > > I have been watching this thread for some time now. I feel that either > I have made grave mistakes with the Blastwave HOWTO page or I have simply > not stepped in soon enough to help you. > > First question I have for you is .. what sort of progress are you making? > > [ ] none - totally stalled > > [ ] little - I can't move forwards > > [ ] okay - I think I have it now ! > > [ ] done - that was easy > > Really, I clearly need to know if I need to tear down the HOWTO page and > start over from scratch. > > Dennis Clarke > dclarke at blastwave.org > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From oldwenstyle at yahoo.com Mon Nov 13 17:25:01 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 08:25:01 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <455897B0.7020300@cognigencorp.com> Message-ID: <20061113162501.20545.qmail@web56602.mail.re3.yahoo.com> I can't thank you enough... That was exactly the problem. Thank you for your time and expertise. At the end of the install I did get this error. ## Executing checkinstall script. ERROR: /dev/random must exist ERROR: /dev/urandom must exist For solaris 8 sparc, install patch 112438 For solaris 8 x86, install patch 112439 pkgadd: ERROR: checkinstall script did not complete successfully Installation of failed. No changes were made to the system. ERROR: could not add CSWossl. ERROR: install of CSWossl failed ERROR: could not install required dependancies for CSWwget #: /tmp/wget -> Is this cause for concern? Oldwen Darin Perusich wrote: the problem is the wget that you've downloaded, if it cannot execute then pkg-get will never work. you can download a working wget at this location: http://www.blastwave.org/wget-sparc.bin once you downloaded it, move it to /tmp/wget and continue to follow the HOWTO at http://www.blastwave.org/howto.html. Oldwen Adriano wrote: > #: / -> /tmp/wget/wget --version > ksh: /tmp/wget/wget: cannot execute > #: / -> > > Darin Perusich wrote: > ok, > > do "/tmp/wget/wget --version" and email the output back to the list. > this way we can see if wget is executing correctly. > > Oldwen Adriano wrote: >> #: / -> ls -l /tmp/wget/wget >> -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget >> #: / -> >> >> >> Darin Perusich wrote: which version of solaris are you running, "uname -a"? if you are running >> solaris 9 or 10 then wget is on the installation media that you used to >> install solaris, the wget package is SUNWwgetu and it installs in >> /usr/sfw/bin. >> >> do "ls -l /tmp/wget/wget" and email the output back to the list. >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users --------------------------------- Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Darin.Perusich at cognigencorp.com Mon Nov 13 17:32:49 2006 From: Darin.Perusich at cognigencorp.com (Darin Perusich) Date: Mon, 13 Nov 2006 11:32:49 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061113162501.20545.qmail@web56602.mail.re3.yahoo.com> References: <20061113162501.20545.qmail@web56602.mail.re3.yahoo.com> Message-ID: <45589E31.3070507@cognigencorp.com> you need to install the latest patch cluster on the system to bring it up to date. go to http://sunsolve.sun.com and create an account. then download the latest solaris 8 patch cluster, it's about 160mb in size. once you've installed this you should be able to continue with pkg-get. Oldwen Adriano wrote: > I can't thank you enough... That was exactly the problem. Thank you > for your time and expertise. At the end of the install I did get > this error. > > ## Executing checkinstall script. ERROR: /dev/random must exist > ERROR: /dev/urandom must exist For solaris 8 sparc, install patch > 112438 For solaris 8 x86, install patch 112439 pkgadd: ERROR: > checkinstall script did not complete successfully Installation of > failed. No changes were made to the system. ERROR: could > not add CSWossl. ERROR: install of CSWossl failed ERROR: could not > install required dependancies for CSWwget #: /tmp/wget -> > > Is this cause for concern? > > Oldwen > > Darin Perusich wrote: the problem > is the wget that you've downloaded, if it cannot execute then pkg-get > will never work. > > you can download a working wget at this location: > > http://www.blastwave.org/wget-sparc.bin > > once you downloaded it, move it to /tmp/wget and continue to follow > the HOWTO at http://www.blastwave.org/howto.html. > > > Oldwen Adriano wrote: >> #: / -> /tmp/wget/wget --version ksh: /tmp/wget/wget: cannot >> execute #: / -> >> >> Darin Perusich wrote: ok, >> >> do "/tmp/wget/wget --version" and email the output back to the >> list. this way we can see if wget is executing correctly. >> >> Oldwen Adriano wrote: >>> #: / -> ls -l /tmp/wget/wget -rwxr-xr-x 1 root staff 164576 Nov 3 >>> 16:06 /tmp/wget/wget #: / -> >>> >>> >>> Darin Perusich wrote: which version of solaris are you running, >>> "uname -a"? if you are running solaris 9 or 10 then wget is on >>> the installation media that you used to install solaris, the wget >>> package is SUNWwgetu and it installs in /usr/sfw/bin. >>> >>> do "ls -l /tmp/wget/wget" and email the output back to the list. >>> >> >> ------------------------------------------------------------------------ >> >> >> _______________________________________________ users mailing list >> users at lists.blastwave.org >> https://lists.blastwave.org/mailman/listinfo/users > > > ------------------------------------------------------------------------ > > > _______________________________________________ users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users -- Darin Perusich Unix Systems Administrator Cognigen Corporation 395 Youngs Rd. Williamsville, NY 14221 darinper at cognigencorp.com From dclarke at blastwave.org Mon Nov 13 18:03:43 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 13 Nov 2006 12:03:43 -0500 (EST) Subject: [csw-users] pkg-get help In-Reply-To: <20061113155716.1899.qmail@web56615.mail.re3.yahoo.com> References: <20061113155716.1899.qmail@web56615.mail.re3.yahoo.com> Message-ID: <37714.24.146.17.108.1163437423.squirrel@mail.blastwave.org> > I have followed the directions on the "how to" page several times to no > avail. > > Answer: little > In that case I probably have a non-trivial number of users that try to follow it and then give up. I'll give it some thought. Dennis From coolvibe at hackerheaven.org Mon Nov 13 18:04:24 2006 From: coolvibe at hackerheaven.org (Emiel Kollof) Date: Mon, 13 Nov 2006 18:04:24 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> References: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> Message-ID: <200611131804.29517.coolvibe@hackerheaven.org> Op maandag 13 november 2006 17:03, schreef EBradley at williams-int.com: > >Really, I clearly need to know if I need to tear down the HOWTO page > > and > > >start over from scratch. > > I don't think that's necessary. I've used the HOWTO when setting up > pkg-get at least 5 times over the past year when loading/reloading my > Solaris 9 and/or 10 machine(s) here at work, with successful results > each time. ACK, same for me. Cheers, Emiel -- Wisdom is knowing what to do with what you know. -- J. Winter Smith -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 191 bytes Desc: not available URL: From oldwenstyle at yahoo.com Mon Nov 13 18:21:00 2006 From: oldwenstyle at yahoo.com (Oldwen Adriano) Date: Mon, 13 Nov 2006 09:21:00 -0800 (PST) Subject: [csw-users] pkg-get help In-Reply-To: <37714.24.146.17.108.1163437423.squirrel@mail.blastwave.org> Message-ID: <20061113172100.81457.qmail@web56607.mail.re3.yahoo.com> Just to be clear, my problem is lack of knowledge for Unix in general. I think the "HowTo" page is great and I am pleased with the site overall. The only thing I would suggest is to point someone who is brand new to Unix to some sort of self-help tutorial resource that you may know of. Thanks for all your help. Oldwen Dennis Clarke wrote: > I have followed the directions on the "how to" page several times to no > avail. > > Answer: little > In that case I probably have a non-trivial number of users that try to follow it and then give up. I'll give it some thought. Dennis _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From dclarke at blastwave.org Mon Nov 13 18:38:00 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Mon, 13 Nov 2006 12:38:00 -0500 (EST) Subject: [csw-users] pkg-get help In-Reply-To: <20061113172100.81457.qmail@web56607.mail.re3.yahoo.com> References: <20061113172100.81457.qmail@web56607.mail.re3.yahoo.com> Message-ID: <43238.24.146.17.108.1163439480.squirrel@mail.blastwave.org> > Just to be clear, my problem is lack of knowledge for Unix in general. I > think the "HowTo" page is great and I am pleased with the site overall. The > only thing I would suggest is to point someone who is brand new to Unix to > some sort of self-help tutorial resource that you may know of. Thanks for > all your help. > OKay ... in that case you are swimming in a whole new world at the moment and I can understand your frustration. I recall, once upon a time, that I told a user that Solaris is great because it has a manpage for everything. The horrible thing is that it has a manpage for everything and they don't really tell you how to get the job done! So I think I'll put up a big bold link at the top of that page that says : Are you totally new to Solaris and UNIX or Linux in general ? If so then I have really easy to follow instructions >>HERE<< That sort of thing. Dennis From mlh at zip.com.au Tue Nov 14 02:34:12 2006 From: mlh at zip.com.au (Matthew Hannigan) Date: Tue, 14 Nov 2006 12:34:12 +1100 Subject: [csw-users] pkg-get help In-Reply-To: <45589895.2090007@cognigencorp.com> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> Message-ID: <20061114013412.GA4231@evofed.localdomain> On Mon, Nov 13, 2006 at 11:08:53AM -0500, Darin Perusich wrote: > dennis, > > they howto page is fine. what i think we should to is setup an ftp > server so that users can easily get wget-sparc.bin and wget-i386.bin. we > forget that a generic solaris installation doesn't really have a decient > tool set for downloading files other then ftp. while netscape MIGHT be Yes, then you could provide a shell script that would setup ftp to bootstrap blastwave non-interactively. Matt From mlh at zip.com.au Tue Nov 14 02:35:23 2006 From: mlh at zip.com.au (Matthew Hannigan) Date: Tue, 14 Nov 2006 12:35:23 +1100 Subject: [csw-users] pkg-get help In-Reply-To: <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> References: <455894A4.7010001@cognigencorp.com> <20061113155550.78284.qmail@web56609.mail.re3.yahoo.com> Message-ID: <20061114013523.GB4231@evofed.localdomain> > Oldwen Adriano wrote: > > #: / -> ls -l /tmp/wget/wget > > -rwxr-xr-x 1 root staff 164576 Nov 3 16:06 /tmp/wget/wget > > #: / -> > > On Mon, Nov 13, 2006 at 07:55:50AM -0800, Oldwen Adriano wrote: > #: / -> /tmp/wget/wget --version > ksh: /tmp/wget/wget: cannot execute > #: / -> > I wonder if perhaps /tmp is mounted -noexec. Matt From ihsan at blastwave.org Tue Nov 14 09:00:19 2006 From: ihsan at blastwave.org (Ihsan Dogan) Date: Tue, 14 Nov 2006 09:00:19 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <20061114013412.GA4231@evofed.localdomain> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> Message-ID: <45597793.1040909@blastwave.org> Hello Matthew, Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: >> they howto page is fine. what i think we should to is setup an ftp >> server so that users can easily get wget-sparc.bin and wget-i386.bin. we >> forget that a generic solaris installation doesn't really have a decient >> tool set for downloading files other then ftp. while netscape MIGHT be > > Yes, then you could provide a shell script that would > setup ftp to bootstrap blastwave non-interactively. You are free to provide us such a script. :-) Ihsan -- ihsan at dogan.ch http://ihsan.dogan.ch/ From mlh at zip.com.au Tue Nov 14 11:21:36 2006 From: mlh at zip.com.au (Matthew Hannigan) Date: Tue, 14 Nov 2006 21:21:36 +1100 Subject: [csw-users] pkg-get help In-Reply-To: <45597793.1040909@blastwave.org> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> <45597793.1040909@blastwave.org> Message-ID: <20061114102136.GH4231@evofed.localdomain> On Tue, Nov 14, 2006 at 09:00:19AM +0100, Ihsan Dogan wrote: > Hello Matthew, > > Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: > > >> they howto page is fine. what i think we should to is setup an ftp > >> server so that users can easily get wget-sparc.bin and wget-i386.bin. we > >> forget that a generic solaris installation doesn't really have a decient > >> tool set for downloading files other then ftp. while netscape MIGHT be > > > > Yes, then you could provide a shell script that would > > setup ftp to bootstrap blastwave non-interactively. > > You are free to provide us such a script. :-) Yes, fair enough :-) Here's a non-tested version: ftp -in ftp.blastwave.org < References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> <45597793.1040909@blastwave.org> Message-ID: <43442.24.146.17.108.1163533590.squirrel@mail.blastwave.org> > Hello Matthew, > > Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: > >>> they howto page is fine. what i think we should to is setup an ftp >>> server so that users can easily get wget-sparc.bin and wget-i386.bin. we >>> forget that a generic solaris installation doesn't really have a decient >>> tool set for downloading files other then ftp. while netscape MIGHT be >> >> Yes, then you could provide a shell script that would >> setup ftp to bootstrap blastwave non-interactively. > > You are free to provide us such a script. :-) I have been working on such a thing, off and on for a while. The trick comes down to simply doing LOTS and LOTS of checking for the existence of this binary or that binary etc etc. I'll just take my prototype and post it out such that we can maybe refine it. But, at the moment, its really infantile. So you will have to wait until next week. As for anonumous FTP access to the Blastwave binaries, that's real easy. $ ftp ftp.ibiblio.org Connected to ibiblio.org. 220 ProFTPD Server (Bring it on...) Name (ftp.ibiblio.org:dclarke): anonymous 331 Anonymous login ok, send your complete email address as your password. Password: 230- Welcome to ftp.ibiblio.org, the public ftp server of ibiblio.org. We hope you find what you're looking for. If you have any problems or questions, please send email to ftpkeeper at ibiblio.org Thanks! 230 Anonymous access granted, restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. so we can easily create a script that will go get the wget binary. Dennis From realmcking at gmail.com Wed Nov 15 02:51:45 2006 From: realmcking at gmail.com (Mark McCoy) Date: Tue, 14 Nov 2006 19:51:45 -0600 Subject: [csw-users] pkg-get help In-Reply-To: <20061114102136.GH4231@evofed.localdomain> References: <20061113154742.75685.qmail@web56609.mail.re3.yahoo.com> <34488.24.146.17.108.1163433171.squirrel@mail.blastwave.org> <45589895.2090007@cognigencorp.com> <20061114013412.GA4231@evofed.localdomain> <45597793.1040909@blastwave.org> <20061114102136.GH4231@evofed.localdomain> Message-ID: On 11/14/06, Matthew Hannigan wrote: > On Tue, Nov 14, 2006 at 09:00:19AM +0100, Ihsan Dogan wrote: > > Hello Matthew, > > > > Am 14.11.2006 2:34 Uhr, Matthew Hannigan schrieb: > > > > >> they howto page is fine. what i think we should to is setup an ftp > > >> server so that users can easily get wget-sparc.bin and wget-i386.bin. we > > >> forget that a generic solaris installation doesn't really have a decient > > >> tool set for downloading files other then ftp. while netscape MIGHT be > > > > > > Yes, then you could provide a shell script that would > > > setup ftp to bootstrap blastwave non-interactively. > > > > You are free to provide us such a script. :-) > > Yes, fair enough :-) > > Here's a non-tested version: > > ftp -in ftp.blastwave.org < user ftp blastwave at invalid.com > get pkg_get.pkg > ! > yes | pkgadd -d pkg_get.pkg all > > > Matt > > > > > > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > How about changing the "!" for your HERE document to something that isn't interpreted by a lot of shells these days? ftp -in ftp.ibiblio.org < Message-ID: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Hello all, Thanks for all your help with pkg-get... I have been able to install the gcc compiler, apache, and php5.... I can't thank you enough. I do have a couple of questions and since most of you are experts I am sure this is easy for you, but new to me...... Where did the PHP5 install to when I ran pkg-get? How do I configure apache to use PHP5? Thank you so much. Oldwen __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From amit.uttam at gmail.com Wed Nov 15 22:42:53 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 15 Nov 2006 13:42:53 -0800 Subject: [csw-users] pkg-get help In-Reply-To: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> References: <43442.24.146.17.108.1163533590.squirrel@mail.blastwave.org> <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Message-ID: <90ee5fbb0611151342r3a657d6dj69569d142ee6c324@mail.gmail.com> Hey there, A couple of things: 1) All software installed from blastwave (using pkg-get -i) are installed in /opt/csw. 2) Thus, PHP5 will be installed under /opt/csw but I am not sure under which directory (could be under /opt/csw/bin or a separate directory under /opt/csw). 3) As for configuring PHP5 with apache, it all depends of the apache version and the set up that you want. It is too much to cover here and there are tons of resources on the web to do that. A couple of sites: http://www.howtoforge.com/apache2_with_php5_and_php4 This assumes of course that you have installed apache2. Hope this helps. Amit On 11/15/06, Oldwen Adriano wrote: > Hello all, > > Thanks for all your help with pkg-get... I have been able to install the gcc > compiler, apache, and php5.... I can't thank you enough. I do have a couple > of questions and since most of you are experts I am sure this is easy for > you, but new to me...... > > Where did the PHP5 install to when I ran pkg-get? > > How do I configure apache to use PHP5? > > Thank you so much. > > Oldwen > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > > From a.cervellin at acm.org Wed Nov 15 23:17:24 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Wed, 15 Nov 2006 23:17:24 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> References: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Message-ID: <455B91F4.1050809@acm.org> Oldwen Adriano wrote: > Hello all, > > Thanks for all your help with pkg-get... I have been able to install the > gcc compiler, apache, and php5.... I can't thank you enough. I do have > a couple of questions and since most of you are experts I am sure this > is easy for you, but new to me...... > > Where did the PHP5 install to when I ran pkg-get? /opt/csw/bin/php5 (to discover where a package put its files, you have at least 2 ways: 1) go to http://www.blastwave.org/packages/ and click on "view files in package" 2) issue the following command in a shell: pkgchk -l > How do I configure apache to use PHP5? pkg-get -i ap2_modphp5 (it should automatically configure everything for you) From a.cervellin at acm.org Wed Nov 15 23:22:02 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Wed, 15 Nov 2006 23:22:02 +0100 Subject: [csw-users] pkg-get help In-Reply-To: <455B91F4.1050809@acm.org> References: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> <455B91F4.1050809@acm.org> Message-ID: <455B930A.1090809@acm.org> Alessio Cervellin wrote: > Oldwen Adriano wrote: >> Hello all, >> >> Thanks for all your help with pkg-get... I have been able to install the >> gcc compiler, apache, and php5.... I can't thank you enough. I do have >> a couple of questions and since most of you are experts I am sure this >> is easy for you, but new to me...... >> >> Where did the PHP5 install to when I ran pkg-get? > > /opt/csw/bin/php5 i meant /opt/csw/php5, sorry From mats.larsson at ericsson.com Thu Nov 16 09:42:40 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 16 Nov 2006 09:42:40 +0100 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061030050102.GA19736@blastwave.org> References: <20061030050102.GA19736@blastwave.org> Message-ID: <455C2480.8070605@ericsson.com> Did an upgrade to latest Gaim today (2.0.0,REV=2006.11.13) and now it won't start. Instead a popup says: Gstreamer faild to initialize. And the gaim process goes into a loop: 24722: poll(0x003B75E0, 4, 4687) (sleeping...) 24722: signotifywait() (sleeping...) 24722: lwp_cond_wait(0xFDDF34F0, 0xFDDF3500, 0xFDDECD88) (sleeping...) 24722: door_return(0x00000000, 0, 0x00000000, 0) (sleeping...) 24722: lwp_cond_wait(0xFDDF34F0, 0xFDDF3500, 0xFDDECD88) (sleeping...) 24722: poll(0x003B75E0, 4, 4687) = 0 24722: write(4, "9601\002\0\0\0 -", 8) = 8 24722: read(4, 0xFFBEEBB8, 32) Err#11 EAGAIN 24722: poll(0xFFBEE968, 1, -1) = 1 24722: read(4, "010302A6\0\0\0\0\0\0\0 ,".., 32) = 32 24722: ioctl(4, FIONREAD, 0xFFBEECAC) = 0 24722: poll(0x003B75E0, 4, 2578) (sleeping...) 24722: signotifywait() (sleeping...) 24722: lwp_cond_wait(0xFDDF34F0, 0xFDDF3500, 0xFDDECD88) (sleeping...) 24722: door_return(0x00000000, 0, 0x00000000, 0) (sleeping...) ... Anyone else seeing this? BR MOL From javier.augusto at gmx.net Thu Nov 16 12:50:25 2006 From: javier.augusto at gmx.net (Javier O. Augusto) Date: Thu, 16 Nov 2006 12:50:25 +0100 Subject: [csw-users] Latest Gaim problem In-Reply-To: <455C2480.8070605@ericsson.com> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> Message-ID: <20061116115025.271810@gmx.net> Greetings, > Did an upgrade to latest Gaim today (2.0.0,REV=2006.11.13) and now it > won't start. Are you trying to use the MSN network? If so, IIRC the MSN plugin is kinda broken, unless you grab the latest code off cvs... HTH, -- Javier "Ein Herz f?r Kinder" - Ihre Spende hilft! Aktion: www.deutschlandsegelt.de Unser Dankesch?n: Ihr Name auf dem Segel der 1. deutschen America's Cup-Yacht! From aaron at ernieball.com Fri Nov 17 00:54:19 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Thu, 16 Nov 2006 15:54:19 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061116115025.271810@gmx.net> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> <20061116115025.271810@gmx.net> Message-ID: <455CFA2B.6060305@ernieball.com> An HTML attachment was scrubbed... URL: From mats.larsson at ericsson.com Thu Nov 16 13:10:14 2006 From: mats.larsson at ericsson.com (Mats Larsson) Date: Thu, 16 Nov 2006 13:10:14 +0100 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061116115025.271810@gmx.net> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> <20061116115025.271810@gmx.net> Message-ID: <455C5526.5050205@ericsson.com> On 2006-11-16 12:50, Javier O. Augusto wrote: > Greetings, >> Did an upgrade to latest Gaim today (2.0.0,REV=2006.11.13) and now it >> won't start. > Are you trying to use the MSN network? If so, IIRC the MSN plugin is kinda broken, unless you grab the latest code off cvs... Yes I am. But the MSN plugin works with the previous (2.0.0,REV=2006.10.13) version which I've reverted to. MOL From aaron at ernieball.com Fri Nov 17 01:06:18 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Thu, 16 Nov 2006 16:06:18 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <455CFA2B.6060305@ernieball.com> References: <20061030050102.GA19736@blastwave.org> <455C2480.8070605@ericsson.com> <20061116115025.271810@gmx.net> <455CFA2B.6060305@ernieball.com> Message-ID: <455CFCFA.6010208@ernieball.com> An HTML attachment was scrubbed... URL: From tmcmahon2 at yahoo.com Fri Nov 17 05:53:16 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Thu, 16 Nov 2006 20:53:16 -0800 (PST) Subject: [csw-users] Latest Gaim problem Message-ID: <20061117045316.30571.qmail@web51801.mail.yahoo.com> Hi Folks. I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. ____________________________________________________________________________________ Sponsored Link Mortgage rates near 39yr lows. $310k for $999/mo. Calculate new payment! www.LowerMyBills.com/lre From magrawal at coba.usf.edu Fri Nov 17 19:06:12 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Fri, 17 Nov 2006 13:06:12 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> References: <20061115180349.71271.qmail@web56608.mail.re3.yahoo.com> Message-ID: You may recall my earlier suggested sequence of packages (it worked for me with no additional configuration except for mysql). I am just a few months ahead of you in UNIX experience. You will probably end up needing mysql as well. php5_mysql in the set does that. You will probably also find that after all your work, phpinfo() does not work. The last command svcadm ... takes care of that. pkg-get install apache2 pkg-get install mysql5 pkg-get install php5 pkg-get install php5_mysql pkg-get install ap2_modphp5 svcadm disable apache2 You will also need the information in Neal Pollack's blog to configure mysql5. It would actually be great if that little configuration step (step 5 in http://blogs.sun.com/nealix/entry/samp_solaris_apache_2_mysql) was handled by the installation process itself. Then the above set of commands would be all that was necessary to set up SAMP from Blastwave. Manish On Wed, 15 Nov 2006 13:03:49 -0500, Oldwen Adriano wrote: > Hello all, > Thanks for all your help with pkg-get... I have been able to install the gcc compiler, apache, and php5.... I can't thank you enough. I do have a couple of questions and since most of you are experts I am sure this is easy for you, but new to me...... > Where did the PHP5 install to when I ran pkg-get? > How do I configure apache to use PHP5? > Thank you so much. > Oldwen > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com From magrawal at coba.usf.edu Fri Nov 17 19:34:06 2006 From: magrawal at coba.usf.edu (Manish Agrawal) Date: Fri, 17 Nov 2006 13:34:06 -0500 Subject: [csw-users] pkg-get help In-Reply-To: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> References: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> Message-ID: The HOWTO page is actually very good. But I must admit that newbies like me can use a little more hand-holding and correct file names. My suggestions are below: 1. In step 1 for get pkgget, you could add the following hand-holding statements - "save it to your desktop and use an FTP program to upload the file to the server/Solaris 10 machine". (recommend say filezilla for FTP and a directory on the server (say /tmp). It would be great if you also provide some policy notes here - this is a good directory because the files automatically get deleted on reboot or whatever is generally recommended) 2. For wget: You mention about the version in /usr/sfw/bin. So, what should we do with it? LEave it as is? Delete it? If I donwload the new wget, how will it get precedence over this? Also, the filename is actually wget-i386.bin (this created confusion for me the first time because I created the /tmp/wget directory and put the file in the /tmp/wget directory following your directions) Suggest rewrite the following: Regardless of where you get that little binary from you need to put it in /tmp/wget and make sure that it is executable. That means that you may need to do this: # chmod 755 /tmp/wget As: Regardless of where you get that little binary from, you need to put it in /tmp. Once again, you can download the file from the link above, save it to your desktop and use Filezilla to upload it to your server). The full file path will be /tmp/wget-i386.bin. Make sure that it is executable. That means that you may need to do this : # chmod 755 /tmp/wget-i386.bin 3. Again in step 3, for # PATH=/tmp:/opt/csw/bin:/usr/sbin:/usr/bin:/usr/dt/bin:/usr/openwin/bin:/usr/ccs/bin # export PATH I would suggest you make it shorter (# PATH=/tmp:/opt/csw/bin:/usr/sbin:/usr/bin) because later you are suggesting doing it in the /etc/default/login file anyway. Same thing in step 7: Also correct our PATH : # PATH=/opt/csw/bin:/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/dt/bin:/usr/ccs/bin # export PATH I have always wondered why the PATH variables for both users and su are set in 2 files - /etc/default/login and /etc/default/su. Thanks Manish From maybird1776 at yahoo.com Sat Nov 18 12:37:47 2006 From: maybird1776 at yahoo.com (ken mays) Date: Sat, 18 Nov 2006 03:37:47 -0800 (PST) Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed Message-ID: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> Hello, CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 minutes on a SunBlade 100. Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW GNOME 2.14.3 at: http://www.blastwave.org/testing. All reported bugs are now resolved and I consider this release production-ready at this moment (as good as any other Linux/BSD distro). You can get a recent copy of CSW GNOME 2.14.3 at: pkg-get -Uu -f -s http://www.blastwave.solaris-fr.org/unstable Enjoy, Ken Mays EarthLink, Inc. ____________________________________________________________________________________ Sponsored Link Compare mortgage rates for today. Get up to 5 free quotes. Www2.nextag.com From dclarke at blastwave.org Sat Nov 18 15:39:58 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Sat, 18 Nov 2006 09:39:58 -0500 (EST) Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed In-Reply-To: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> References: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> Message-ID: <60206.70.50.140.192.1163860798.squirrel@mail.blastwave.org> > Hello, > > CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 > minutes on a SunBlade 100. > Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW > GNOME 2.14.3 at: http://www.blastwave.org/testing. > > All reported bugs are now resolved and I consider this release > production-ready at this moment (as good as any other Linux/BSD distro). > > You can get a recent copy of CSW GNOME 2.14.3 at: > > > pkg-get -Uu -f -s http://www.blastwave.solaris-fr.org/unstable > So what are you doing with the gnometest.blastwave.org ? I will need to do some tests here on Solaris 8 and for these tests I'll need to use the gnometest site that we all agreed to some time ago. Dennis From ihsan at dogan.ch Sat Nov 18 22:57:30 2006 From: ihsan at dogan.ch (Ihsan Dogan) Date: Sat, 18 Nov 2006 22:57:30 +0100 Subject: [csw-users] pkg-get help In-Reply-To: References: <7AEE334EF0CB3E4B9730CD9A1C8CFFF401DB60D8@EXCHANGESRV.williams-int.com> Message-ID: <455F81CA.5030509@dogan.ch> on 17.11.2006 19:34 Manish Agrawal said the following: > 2. For wget: You mention about the version in /usr/sfw/bin. So, what should we do with it? LEave it as is? Delete it? If I donwload the new wget, how will it get precedence over this? With wget it's the same with all other packages on the system. For example gtk is also coming with Solaris, but the package from Blastwave is in general newer. It's up to you if you delete the package or not. I would just leave it. It does not hurt and disks are these days not expensive. Ihsan -- ihsan at dogan.ch http://ihsan.dogan.ch/ From J.Langner at fz-rossendorf.de Mon Nov 20 13:57:11 2006 From: J.Langner at fz-rossendorf.de (Jens Langner) Date: Mon, 20 Nov 2006 13:57:11 +0100 Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed In-Reply-To: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> References: <20061118113747.44354.qmail@web33610.mail.mud.yahoo.com> Message-ID: <4561A627.4010600@fz-rossendorf.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ken mays schrieb: > CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 minutes on a SunBlade 100. > Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW GNOME 2.14.3 at: http://www.blastwave.org/testing. > > All reported bugs are now resolved and I consider this release production-ready at this moment (as good as any other Linux/BSD distro). Sorry to disappoint you once again, but after having installed the gnomevfs2 package you are refering to, the splash screen still takes 2-3 minutes for vanishing, as well as the background image takes the same time to load up. So I consider this problem as not being fixed yet and wouldn't consider the blastwave GNOME to be production ready. And please note that I have tried the recent GNOME stuff on our 2.10 server with the very latest patches and I even rebooted it. Nothing has changed after having installed the 2006.11.15 package of gnomevfs2. cheers, jens - -- Jens Langner Ph: +49-351-2602757 Forschungszentrum Rossendorf e.V. Institute of Radiopharmacy - PET Center J.Langner at fz-rossendorf.de Germany http://www.jens-langner.de/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQCVAwUBRWGmJ5FDGXNZvoo5AQJb8AQAheUBKcDReES/lrvu6yX9ZwVP6Kw3Mplh FeaCdnZvbuD+4wTAXm23lT50MVd0o2qqW2snJQvXYbMuhbDdsjkQyqFwcmUBFM+Y IfihiJtNTAimmrdgECuw6ssU91g0nbjGF+zWh3MPU8xMBGwtW8C4C8ywm1YDAy8P ch23p6kmfMw= =hczc -----END PGP SIGNATURE----- From maybird1776 at yahoo.com Mon Nov 20 14:30:09 2006 From: maybird1776 at yahoo.com (ken mays) Date: Mon, 20 Nov 2006 05:30:09 -0800 (PST) Subject: [csw-users] CSW GNOME 2.14.3 login delay fixed Message-ID: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> Hi Jens, Interesting. I have the same delay time of 2.5 minutes, yet the menu comes up and the splash screen disappears properly. I also ran the login times for Sun JDS which were very similar on the same platform (SunBlade 100). Besides this delay, everything else works fine. Now on a modern high-end x64 platform, I get these results with CSW GNOME 2.14.3: 1. GNOME login screen to initial Splash screen: 20 seconds 2. GNOME login screen to initial Background image with full menu: 58 seconds. I'll look into this further, but at least the splash screen and background image is working properly without any user intervention. Ken ----- Original Message ---- From: Jens Langner To: questions and discussions Sent: Monday, November 20, 2006 7:57:11 AM Subject: Re: [csw-users] CSW GNOME 2.14.3 login delay fixed -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ken mays schrieb: > CSW GNOME 2.14.3 is now fixed and the full login process being less than 2.5 minutes on a SunBlade 100. > Please use gnomevfs2, REV=2006.11.15 or higher. I've posted updates to CSW GNOME 2.14.3 at: http://www.blastwave.org/testing. > > All reported bugs are now resolved and I consider this release production-ready at this moment (as good as any other Linux/BSD distro). Sorry to disappoint you once again, but after having installed the gnomevfs2 package you are refering to, the splash screen still takes 2-3 minutes for vanishing, as well as the background image takes the same time to load up. So I consider this problem as not being fixed yet and wouldn't consider the blastwave GNOME to be production ready. And please note that I have tried the recent GNOME stuff on our 2.10 server with the very latest patches and I even rebooted it. Nothing has changed after having installed the 2006.11.15 package of gnomevfs2. cheers, jens - -- Jens Langner Ph: +49-351-2602757 Forschungszentrum Rossendorf e.V. Institute of Radiopharmacy - PET Center J.Langner at fz-rossendorf.de Germany http://www.jens-langner.de/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQCVAwUBRWGmJ5FDGXNZvoo5AQJb8AQAheUBKcDReES/lrvu6yX9ZwVP6Kw3Mplh FeaCdnZvbuD+4wTAXm23lT50MVd0o2qqW2snJQvXYbMuhbDdsjkQyqFwcmUBFM+Y IfihiJtNTAimmrdgECuw6ssU91g0nbjGF+zWh3MPU8xMBGwtW8C4C8ywm1YDAy8P ch23p6kmfMw= =hczc -----END PGP SIGNATURE----- _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave.org/mailman/listinfo/users ____________________________________________________________________________________ Sponsored Link $200,000 mortgage for $660/ mo - 30/15 yr fixed, reduce debt - http://yahoo.ratemarketplace.com From aaron at ernieball.com Tue Nov 21 01:31:01 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Mon, 20 Nov 2006 16:31:01 -0800 Subject: [csw-users] Evince In-Reply-To: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> References: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> Message-ID: <456248C5.5080509@ernieball.com> I just installed Evince and get the following error. Any ideas? ld.so.1: evince: fatal: relocation error: file /opt/csw/lib/gtk-2.0/2.10.0/printbackends/libprintbackend-cups.so: symbol create_pickone_option_custom: referenced symbol not found From a.cervellin at acm.org Tue Nov 21 06:29:26 2006 From: a.cervellin at acm.org (Alessio Cervellin) Date: Tue, 21 Nov 2006 06:29:26 +0100 Subject: [csw-users] Evince In-Reply-To: <456248C5.5080509@ernieball.com> References: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> <456248C5.5080509@ernieball.com> Message-ID: <45628EB6.6020701@acm.org> Aaron Wilson wrote: > I just installed Evince and get the following error. > > Any ideas? > > ld.so.1: evince: fatal: relocation error: file > /opt/csw/lib/gtk-2.0/2.10.0/printbackends/libprintbackend-cups.so: > symbol create_pickone_option_custom: referenced symbol not found it's due to this bug: http://www.blastwave.org/mantis/view_bug_page.php?f_id=1935 the package misses the "depend" file so the dependencies are not being automatically installed. A fixed version will be out soon, in the meanwhile you can install the dependencies manually: P CSWbonobo2 P CSWesound P CSWexpat P CSWfconfig P CSWftype2 P CSWgconf2 P CSWggettext P CSWglib2 P CSWgnomekeyring P CSWgnomevfs2 P CSWgtk2 P CSWiconv P CSWjpeg P CSWlibart P CSWlibatk P CSWlibbonoboui P CSWlibcairo P CSWlibglade2 P CSWlibgnome P CSWlibgnomecanvas P CSWlibgnomeprint P CSWlibgnomeprintui P CSWlibgnomeui P CSWlibnet P CSWlibpopt P CSWlibxml2 P CSWlibxrender P CSWnautilus P CSWorbit2 P CSWossl P CSWpango P CSWpng P CSWpoppler P CSWsunmath P CSWzlib P CSWaudiofile From aaron at ernieball.com Tue Nov 21 16:51:41 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Tue, 21 Nov 2006 07:51:41 -0800 Subject: [csw-users] Evince In-Reply-To: <45628EB6.6020701@acm.org> References: <20061120133009.60339.qmail@web33604.mail.mud.yahoo.com> <456248C5.5080509@ernieball.com> <45628EB6.6020701@acm.org> Message-ID: <4563208D.4070108@ernieball.com> An HTML attachment was scrubbed... URL: From aaron at ernieball.com Tue Nov 21 16:55:32 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Tue, 21 Nov 2006 07:55:32 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061117045316.30571.qmail@web51801.mail.yahoo.com> References: <20061117045316.30571.qmail@web51801.mail.yahoo.com> Message-ID: <45632174.7080509@ernieball.com> All I get is a pop up that says "GStreamer failed to initialize." and there is a Close button. No output in the terminal window I'm running Gaim from. Torrey McMahon wrote: > Hi Folks. > > > > I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. > > > > > > > ____________________________________________________________________________________ > Sponsored Link > > Mortgage rates near 39yr lows. > $310k for $999/mo. Calculate new payment! > www.LowerMyBills.com/lre > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From pgress at optonline.net Tue Nov 21 17:29:40 2006 From: pgress at optonline.net (Paul Gress) Date: Tue, 21 Nov 2006 11:29:40 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45632174.7080509@ernieball.com> References: <20061117045316.30571.qmail@web51801.mail.yahoo.com> <45632174.7080509@ernieball.com> Message-ID: <45632974.4070009@optonline.net> Aaron Wilson wrote: > All I get is a pop up that says "GStreamer failed to initialize." and > there is a Close button. No output in the terminal window I'm running > Gaim from. > > > > Torrey McMahon wrote: > >> Hi Folks. >> >> >> >> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >> >> I too was getting the same message, and I thought Gaim wasn't working after I clicked close. But I noticed on my task bar there was a gaim icon. Upon clicking on that icon the gaim window popped up working except for sound. So I basically reverted to the previous release. http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz Paul From a.cervellin at virgilio.it Tue Nov 21 17:34:29 2006 From: a.cervellin at virgilio.it (Alessio Cervellin) Date: Tue, 21 Nov 2006 17:34:29 +0100 (GMT+01:00) Subject: [csw-users] Evince Message-ID: <10f0b5e5919.a.cervellin@virgilio.it> So you still have the problem even after installing all the dependencies? Anyway the missing lib shown in the error you say is in CSWgtk2 ----Messaggio originale---- Da: aaron at ernieball.com Data: 21- nov-2006 4.51 PM A: "questions and discussions" Ogg: Re: [csw-users] Evince _______________________________________________ users mailing list users at lists.blastwave.org https://lists.blastwave. org/mailman/listinfo/users From tmcmahon2 at yahoo.com Tue Nov 21 19:59:03 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Tue, 21 Nov 2006 13:59:03 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45632974.4070009@optonline.net> References: <20061117045316.30571.qmail@web51801.mail.yahoo.com> <45632174.7080509@ernieball.com> <45632974.4070009@optonline.net> Message-ID: <45634C77.7000001@yahoo.com> Paul Gress wrote: > Aaron Wilson wrote: > >> All I get is a pop up that says "GStreamer failed to initialize." and >> there is a Close button. No output in the terminal window I'm running >> Gaim from. >> >> >> >> Torrey McMahon wrote: >> >> >>> Hi Folks. >>> >>> >>> >>> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >>> >>> >>> > > I too was getting the same message, and I thought Gaim wasn't working > after I clicked close. But I noticed on my task bar there was a gaim > icon. Upon clicking on that icon the gaim window popped up working > except for sound. So I basically reverted to the previous release. > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz > > One of the problems is that the gaim developers decided to switch to gstreamer between betas. (From what I can see ..) The second is that I don't have a solaris box to test stuff on so I'm sorry this is taking so long. Ken - Is there a command that can check on gstreamer running, its config, etc? From maybird1776 at yahoo.com Wed Nov 22 12:51:38 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 03:51:38 -0800 (PST) Subject: [csw-users] Latest Gaim problem Message-ID: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> You can use 'gst-launch' and 'gst-inspect'. Check which sound plugin module GAIM is trying to use. I was thinking we could also switch GAIM in properties to use an older sound library like esd to fix that issue. ~ Ken ----- Original Message ---- From: Torrey McMahon To: questions and discussions ; maybird1776 at yahoo.com Sent: Tuesday, November 21, 2006 1:59:03 PM Subject: Re: [csw-users] Latest Gaim problem Paul Gress wrote: > Aaron Wilson wrote: > >> All I get is a pop up that says "GStreamer failed to initialize." and >> there is a Close button. No output in the terminal window I'm running >> Gaim from. >> >> >> >> Torrey McMahon wrote: >> >> >>> Hi Folks. >>> >>> >>> >>> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >>> >>> >>> > > I too was getting the same message, and I thought Gaim wasn't working > after I clicked close. But I noticed on my task bar there was a gaim > icon. Upon clicking on that icon the gaim window popped up working > except for sound. So I basically reverted to the previous release. > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz > > > http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz > > One of the problems is that the gaim developers decided to switch to gstreamer between betas. (From what I can see ..) The second is that I don't have a solaris box to test stuff on so I'm sorry this is taking so long. Ken - Is there a command that can check on gstreamer running, its config, etc? ____________________________________________________________________________________ Sponsored Link Rates near 39yr lows. $510,000 Loan for $1698/mo. Calcuate new payment. www.LowerMyBills.com/lre From rme at cnd-ag.ch Wed Nov 22 15:57:51 2006 From: rme at cnd-ag.ch (Roland Meier) Date: Wed, 22 Nov 2006 15:57:51 +0100 Subject: [csw-users] thttpd does not start Message-ID: <4564656F.5020405@cnd-ag.ch> Hello, I've installed the thttpd package. Unfortunately thttpd does not start and it doesn't give any error message: bash-3.00# truss /opt/csw/thttpd/sbin/thttpd -C /opt/csw/etc/thttpd.conf execve("/opt/csw/thttpd/sbin/thttpd", 0xFFBFFDB4, 0xFFBFFDC4) argc = 3 resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12 resolvepath("/opt/csw/thttpd/sbin/thttpd", "/opt/csw/thttpd/sbin/thttpd", 1023) = 27 stat("/opt/csw/thttpd/sbin/thttpd", 0xFFBFFB90) = 0 open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT stat("/lib/libresolv.so.2", 0xFFBFF6B0) = 0 resolvepath("/lib/libresolv.so.2", "/lib/libresolv.so.2", 1023) = 19 open("/lib/libresolv.so.2", O_RDONLY) = 3 mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000 mmap(0x00010000, 335872, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF340000 mmap(0xFF340000, 245997, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF340000 mmap(0xFF38E000, 10420, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 253952) = 0xFF38E000 munmap(0xFF37E000, 65536) = 0 memcntl(0xFF340000, 36184, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 stat("/lib/libsocket.so.1", 0xFFBFF6B0) = 0 resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19 open("/lib/libsocket.so.1", O_RDONLY) = 3 mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000 mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000 mmap(0xFF310000, 44006, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000 mmap(0xFF32C000, 4285, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF32C000 munmap(0xFF31C000, 65536) = 0 memcntl(0xFF310000, 13952, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 stat("/lib/libnsl.so.1", 0xFFBFF6B0) = 0 resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16 open("/lib/libnsl.so.1", O_RDONLY) = 3 mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000 mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000 mmap(0xFF200000, 591502, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000 mmap(0xFF2A2000, 33573, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFF2A2000 mmap(0xFF2AC000, 23056, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2AC000 munmap(0xFF292000, 65536) = 0 memcntl(0xFF200000, 89076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 stat("/lib/libc.so.1", 0xFFBFF6B0) = 0 resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14 open("/lib/libc.so.1", O_RDONLY) = 3 mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000 mmap(0x00010000, 991232, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF100000 mmap(0xFF100000, 882285, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF100000 mmap(0xFF1E8000, 29469, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 884736) = 0xFF1E8000 mmap(0xFF1F0000, 2592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F0000 munmap(0xFF1D8000, 65536) = 0 mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000 memcntl(0xFF100000, 139784, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 close(3) = 0 munmap(0xFF3A0000, 8192) = 0 mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3A0000 getcontext(0xFFBFF888) getrlimit(RLIMIT_STACK, 0xFFBFF868) = 0 getpid() = 12630 [12629] setustack(0xFF3A2088) sigfillset(0xFF1EFB20) = 0 stat("/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1", 0xFFBFF340) = 0 resolvepath("/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1", "/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 37 open("/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1", O_RDONLY) = 3 mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF2F0000 close(3) = 0 fstat(-1, 0xFFBFE608) Err#9 EBADF open("/dev/conslog", O_WRONLY) = 3 fcntl(3, F_SETFD, 0x00000001) = 0 fstat(3, 0xFFBFE608) = 0 open("/opt/csw/etc/thttpd.conf", O_RDONLY) = 4 fstat64(4, 0xFFBFBD88) = 0 brk(0x0003EC90) = 0 brk(0x00042C90) = 0 fstat64(4, 0xFFBFBC30) = 0 ioctl(4, TCGETA, 0xFFBFBD14) Err#25 ENOTTY read(4, " # T h i s s e c t i".., 8192) = 294 read(4, 0x0003EC9C, 8192) = 0 llseek(4, 0, SEEK_CUR) = 294 close(4) = 0 brk(0x00042C90) = 0 brk(0x00044C90) = 0 time() = 1164206749 open("/usr/share/lib/zoneinfo/Europe/Zurich", O_RDONLY) = 4 fstat64(4, 0xFFBFE520) = 0 read(4, " T Z i f\0\0\0\0\0\0\0\0".., 685) = 685 close(4) = 0 getuid() = 0 [0] open64("/var/run/name_service_door", O_RDONLY) = 4 fcntl(4, F_SETFD, 0x00000001) = 0 door_info(4, 0xFF1EF7E8) = 0 door_call(4, 0xFFBFE1C0) = 0 open("/var/log/thttpd.log", O_WRONLY|O_APPEND|O_CREAT, 0666) = 5 llseek(5, 0, SEEK_END) = 0 fcntl(5, F_SETFD, 0x00000001) = 0 getuid() = 0 [0] fchown(5, 102, 1) = 0 chdir("/opt/csw/thttpd/www") = 0 getcwd("/opt/csw/thttpd/www", 1024) = 0 llseek(0, 0, SEEK_CUR) = 19087 close(0) = 0 close(1) = 0 close(2) = 0 schedctl() = 0xFF2E0000 fork1() = 12631 lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF] _exit(0) This happens just after thttpd was installed. Any ideas what is going wrong here? Cheers, Roland -- ************************************** Computer + Network Division AG Roland Meier Bahnhofstrasse 28 8307 Effretikon Tel: 052/355'13'12 E-Mail: rme at cnd-ag.ch ************************************** From pfelecan at blastwave.org Wed Nov 22 16:14:23 2006 From: pfelecan at blastwave.org (Peter FELECAN) Date: Wed, 22 Nov 2006 16:14:23 +0100 Subject: [csw-users] /testing GnuCash available for QA Message-ID: A new release of the GnuCash packages can be found in the testing area: - the core package: /export/medusa/testing/gnucash-2.0.2,REV=2006.11.09-SunOS5.8-i386-CSW.pkg.gz /export/medusa/testing/gnucash-2.0.2,REV=2006.11.09-SunOS5.8-sparc-CSW.pkg.gz /export/medusa/testing/gnucashcommon-2.0.2,REV=2006.11.09-SunOS5.8-all-CSW.pkg.gz - the documentation package: /export/medusa/testing/gnucashdoc-2.0.1-SunOS5.8-all-CSW.pkg.gz The documentation is in its own package because for the moment the upstream code base is not yet synchronised. You can install them using pkgadd; first gnucashcommon and then gnucash. Note that there are 2 important dependencies for those using OFX imports: libofx and opensp; they need to have the following versions: - opensp: 1.5.2 - libofx: 0.8.2,REV=2006.11.19 and are already available in the unstable branch. There are 2 known issues: 1. The documentation cannot be accessed because yelp doesn't work, at least for me --- see: http://www.blastwave.org/mantis/view_bug_page.php?f_id=0001867 However, you can access the documentation by using the SUN provided yelp: /usr/bin/yelp \ ghelp:/opt/csw/share/gnome/help/gnucash/C/gnucash-help.xml and /usr/bin/yelp \ ghelp:/opt/csw/share/gnome/help/gnucash/C/gnucash-guide.xml 2. Printing doesn't work; however, you can print by exporting your report in HTML and use your preferred UA to print it. As there is no GnuCash mantis category, if you find a bug please report directly to my Blastwave address. Enjoy. -- Peter From tmcmahon2 at yahoo.com Wed Nov 22 20:49:37 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 14:49:37 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> Message-ID: <4564A9D1.3030307@yahoo.com> They made gstreamer the default though you can make a couple of changes in the preferences panel. I think ESD was the one that was recently removed. (Again, I can't check.) If someone that is seeing the gstreamer issue could run the commands below *before* they run gaim it would help to figure out whats going on. ken mays wrote: > You can use 'gst-launch' and 'gst-inspect'. Check which sound plugin module GAIM is trying to use. I was thinking we could also switch GAIM in properties to use an older sound library like esd to fix that issue. > > ~ Ken > > > ----- Original Message ---- > From: Torrey McMahon > To: questions and discussions ; maybird1776 at yahoo.com > Sent: Tuesday, November 21, 2006 1:59:03 PM > Subject: Re: [csw-users] Latest Gaim problem > > > Paul Gress wrote: > >> Aaron Wilson wrote: >> >> >>> All I get is a pop up that says "GStreamer failed to initialize." and >>> there is a Close button. No output in the terminal window I'm running >>> Gaim from. >>> >>> >>> >>> Torrey McMahon wrote: >>> >>> >>> >>>> Hi Folks. >>>> >>>> >>>> >>>> I'm "away" from a Solaris box with net access for awhile so you'll have to give me some more details on the error messages you're seeing. >>>> >>>> >>>> >>>> >> I too was getting the same message, and I thought Gaim wasn't working >> after I clicked close. But I noticed on my task bar there was a gaim >> icon. Upon clicking on that icon the gaim window popped up working >> except for sound. So I basically reverted to the previous release. >> >> >> http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/i386/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-i386-CSW.pkg.gz >> >> >> http://blastwave.informatik.uni-erlangen.de/oldpkgs/unstable/sparc/5.10/gaim-2.0.0,REV=2006.10.13-SunOS5.8-sparc-CSW.pkg.gz >> >> >> > > One of the problems is that the gaim developers decided to switch to > gstreamer between betas. (From what I can see ..) The second is that I > don't have a solaris box to test stuff on so I'm sorry this is taking so > long. > > Ken - Is there a command that can check on gstreamer running, its > config, etc? > > > > ____________________________________________________________________________________ > Sponsored Link > > Rates near 39yr lows. $510,000 Loan for $1698/mo. > Calcuate new payment. www.LowerMyBills.com/lre > > > From aaron at ernieball.com Wed Nov 22 21:11:09 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Wed, 22 Nov 2006 12:11:09 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564A9D1.3030307@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> Message-ID: <4564AEDD.1050806@ernieball.com> An HTML attachment was scrubbed... URL: From maybird1776 at yahoo.com Wed Nov 22 22:12:44 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 13:12:44 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564AEDD.1050806@ernieball.com> Message-ID: <2688.9476.qm@web33605.mail.mud.yahoo.com> Hmmm.... if this is the case.. you don't have all the Gstreamer sound modules in place. This is the issue I see - you need gst-plugins-good, gst-plugins-bad installed to give you up to 64 plugins with 235 features). Torrey - you can build gst-plugins-bad and gst-plugins-ugly for Blastwave submission... I see during the 'gaim -d' out put that it tries to init the sound drivers. I don't see an error here. I'll dump the gaim -d output in a few... ~ Ken ____________________________________________________________________________________ Sponsored Link Online or Campus degree Associate's, Bachelor's, or Master's in less than one year.www.findtherightschool.com From tmcmahon2 at yahoo.com Wed Nov 22 22:26:37 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 16:26:37 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <2688.9476.qm@web33605.mail.mud.yahoo.com> References: <2688.9476.qm@web33605.mail.mud.yahoo.com> Message-ID: <4564C08D.7030604@yahoo.com> ken mays wrote: > Hmmm.... > > if this is the case.. you don't have all the Gstreamer > sound modules in place. This is the issue I see - you > need gst-plugins-good, gst-plugins-bad installed to > give you up to 64 plugins with 235 features). > > Torrey - you can build gst-plugins-bad and > gst-plugins-ugly for Blastwave submission... I'll get on that ... but would having the base and ugly plugins be a good idea as well? (And who names this stuff?) From maybird1776 at yahoo.com Wed Nov 22 22:26:33 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 13:26:33 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564A9D1.3030307@yahoo.com> Message-ID: <625667.49851.qm@web33609.mail.mud.yahoo.com> Torrey, You may need to install or build gst-plugins-good/bad/ugly to get more sound plugins.. ~ Ken Mays Output below: --------------------- > gst-inspect Total count: 68 plugins, 235 features -------------------- bash-3.00# gst-launch flacdec Setting pipeline to PAUSED ... ERROR: Pipeline doesn't want to pause. Setting pipeline to NULL ... FREEING pipeline ... bash-3.00# -------------------- bash-3.00# gaim -d GTK Accessibility Module initialized plugins: probing /opt/csw/lib/gaim/extplacement.so plugins: probing /opt/csw/lib/gaim/gaimrc.so plugins: probing /opt/csw/lib/gaim/gestures.so plugins: probing /opt/csw/lib/gaim/gevolution.so plugins: probing /opt/csw/lib/gaim/history.so plugins: probing /opt/csw/lib/gaim/iconaway.so plugins: probing /opt/csw/lib/gaim/idle.so plugins: probing /opt/csw/lib/gaim/libgg.so plugins: probing /opt/csw/lib/gaim/libirc.so plugins: probing /opt/csw/lib/gaim/libjabber.so plugins: probing /opt/csw/lib/gaim/libmsn.so plugins: probing /opt/csw/lib/gaim/libnovell.so plugins: probing /opt/csw/lib/gaim/liboscar.so plugins: probing /opt/csw/lib/gaim/libqq.so plugins: probing /opt/csw/lib/gaim/libsametime.so plugins: /opt/csw/lib/gaim/libsametime.so has a prefs_info, but is a prpl. This is no longer supported. plugins: probing /opt/csw/lib/gaim/libsimple.so plugins: probing /opt/csw/lib/gaim/libyahoo.so plugins: probing /opt/csw/lib/gaim/libzephyr.so plugins: probing /opt/csw/lib/gaim/log_reader.so plugins: probing /opt/csw/lib/gaim/notify.so plugins: probing /opt/csw/lib/gaim/psychic.so plugins: probing /opt/csw/lib/gaim/relnot.so plugins: probing /opt/csw/lib/gaim/spellchk.so plugins: probing /opt/csw/lib/gaim/ssl-gnutls.so plugins: probing /opt/csw/lib/gaim/ssl-nss.so plugins: probing /opt/csw/lib/gaim/ssl.so plugins: probing /opt/csw/lib/gaim/statenotify.so plugins: probing /opt/csw/lib/gaim/tcl.so plugins: probing /opt/csw/lib/gaim/ticker.so plugins: probing /opt/csw/lib/gaim/timestamp.so plugins: probing /opt/csw/lib/gaim/timestamp_format.so util: Reading file accounts.xml from directory //.gaim util: Reading file status.xml from directory //.gaim stun: using server stun: using server sound: Initializing sound output drivers. util: Reading file blist.xml from directory //.gaim util: File //.gaim/blist.xml does not exist (this is not necessarily an error) prefs: Reading //.gaim/prefs.xml prefs: Finished reading //.gaim/prefs.xml gtkblist: added visibility manager: 1 docklet: created pounce: Error reading pounces: Failed to open file '//.gaim/pounces.xml': No such file or directory Session Management: ICE initialized. Session Management: Connecting with no previous ID Session Management: Handling new ICE connection... done. Session Management: Connected to manager (GnomeSM) with client ID 1000006eb5000116423042200000076740007 Session Management: Using gaim as command gtkspell: Failed to setup GtkSpell: aspell: No word lists can be found for the language "en_US". account: Connecting to account marvin at hotmail.com util: Writing file accounts.xml to directory //.gaim Session Management: Received first save_yourself Session Management: Received save_complete docklet: failed to embed within timeout gtkblist: removed visibility manager: 0 main: Unloading all plugins plugins: Unloading plugin Gadu-Gadu plugins: Unloading plugin IRC plugins: Unloading plugin Jabber plugins: Unloading plugin MSN plugins: Unloading plugin GroupWise plugins: Unloading plugin AIM/ICQ plugins: Unloading plugin QQ plugins: Unloading plugin Sametime plugins: Unloading plugin SIMPLE plugins: Unloading plugin Yahoo plugins: Unloading plugin Zephyr plugins: Unloading plugin Tcl Plugin Loader Session Management: Handling closed ICE connection... done. Session Management: Connection closed. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. bash-3.00# ____________________________________________________________________________________ Want to start your own business? Learn how on Yahoo! Small Business. http://smallbusiness.yahoo.com/r-index From maybird1776 at yahoo.com Wed Nov 22 22:29:41 2006 From: maybird1776 at yahoo.com (ken mays) Date: Wed, 22 Nov 2006 13:29:41 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564C08D.7030604@yahoo.com> Message-ID: <452578.68745.qm@web33615.mail.mud.yahoo.com> Yes... you need the other sound plugins installed. At least that will give you the compatible sound files you need then set your preferences command to launch whatever sound file you want that is compatible to GAIM. You may want to set that up in a default file so users don't have to deal with setting it up or messing with Gstreamer commands. Ken M. ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From tmcmahon2 at yahoo.com Wed Nov 22 22:31:52 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 16:31:52 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564C08D.7030604@yahoo.com> References: <2688.9476.qm@web33605.mail.mud.yahoo.com> <4564C08D.7030604@yahoo.com> Message-ID: <4564C1C8.1030004@yahoo.com> Torrey McMahon wrote: > ken mays wrote: > >> Hmmm.... >> >> if this is the case.. you don't have all the Gstreamer >> sound modules in place. This is the issue I see - you >> need gst-plugins-good, gst-plugins-bad installed to >> give you up to 64 plugins with 235 features). >> >> Torrey - you can build gst-plugins-bad and >> gst-plugins-ugly for Blastwave submission... >> > > I'll get on that ... but would having the base and ugly plugins be a > good idea as well? (And who names this stuff?) > ... though I meant base and core ... but I see you already have those. From tmcmahon2 at yahoo.com Wed Nov 22 22:36:09 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 22 Nov 2006 16:36:09 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564AEDD.1050806@ernieball.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> Message-ID: <4564C2C9.8060204@yahoo.com> Aaron and others that are seeing this problem - Can you check to see if you have the CSWgstplugins and CSWgstpluginsgood installed? If not try to install one, run gaim, see if sound works, install the other, run gaim, see if sound works. It might be I need to include one of those as a dependency. Usually, the packaging system picks up such things but it might have missed it this time due to the way gstreamer loads things up. Aaron Wilson wrote: > Here is what I get from those commands > > bash-3.00$ ./gst-launch > ERROR: pipeline could not be constructed: empty pipeline not allowed. > > > bash-3.00$ ./gst-inspect > coreindexers: fileindex: A index that stores entries in file > coreindexers: memindex: A index that stores entries in memory > coreelements: typefind: TypeFind > coreelements: tee: Tee pipe fitting > coreelements: filesink: File Sink > coreelements: queue: Queue > coreelements: identity: Identity > coreelements: filesrc: File Source > coreelements: fdsink: Filedescriptor Sink > coreelements: fdsrc: Disk Source > coreelements: fakesink: Fake Sink > coreelements: fakesrc: Fake Source > coreelements: capsfilter: CapsFilter > staticelements: bin: Generic bin > staticelements: pipeline: Pipeline object > > Total count: 3 plugins, 15 features > > > > Torrey McMahon wrote: >> They made gstreamer the default though you can make a couple of changes >> in the preferences panel. I think ESD was the one that was recently >> removed. (Again, I can't check.) >> >> If someone that is seeing the gstreamer issue could run the commands >> below *before* they run gaim it would help to figure out whats going on. >> >> From pgress at optonline.net Thu Nov 23 05:42:43 2006 From: pgress at optonline.net (Paul Gress) Date: Wed, 22 Nov 2006 23:42:43 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <4564C2C9.8060204@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> Message-ID: <456526C3.4080309@optonline.net> Torrey McMahon wrote: > Aaron and others that are seeing this problem - Can you check to see if > you have the CSWgstplugins and CSWgstpluginsgood installed? If not try > to install one, run gaim, see if sound works, install the other, run > gaim, see if sound works. It might be I need to include one of those as > a dependency. Usually, the packaging system picks up such things but it > might have missed it this time due to the way gstreamer loads things up. > > OK, I was previously getting the GStreamer problem until I downgraded. I just updated my gaim to run the commands "gst-launch" and "gst-inspect", and pkginfo -l CSWgstplugins & pkginfo -l CSWgstgood. I hope it helps. See below: $ /opt/csw/bin/gst-launch ERROR: pipeline could not be constructed: empty pipeline not allowed. $ /opt/csw/bin/gst-inspect ximagesrc: ximagesrc: Ximage video source wavparse: wavparse: WAV audio demuxer wavenc: wavenc: WAV audio muxer videomixer: videomixer: Video mixer videoflip: videoflip: Video flipper videobox: videobox: Video box filter videobalance: videobalance: Video balance udp: udpsrc: UDP packet receiver udp: dynudpsink: UDP packet sender udp: multiudpsink: UDP packet sender udp: udpsink: UDP packet sender speex: speexdec: Speex audio decoder speex: speexenc: Speex audio encoder smpte: smpte: SMPTE transitions rtsp: rtpdec: RTP Decoder rtsp: rtspsrc: RTSP packet receiver rtp: rtpspeexdepay: RTP packet parser rtp: rtpspeexpay: RTP packet parser rtp: rtpmp4gpay: RTP packet parser rtp: rtpmp4vdepay: RTP packet parser rtp: rtpmp4vpay: RTP packet parser rtp: asteriskh263: RTP packet parser rtp: rtph263pay: RTP packet parser rtp: rtph263pdepay: RTP packet parser rtp: rtph263ppay: RTP packet parser rtp: rtpmpapay: RTP packet parser rtp: rtpmpadepay: RTP packet parser rtp: rtppcmapay: RTP packet parser rtp: rtppcmupay: RTP packet parser rtp: rtppcmudepay: RTP packet parser rtp: rtppcmadepay: RTP packet parser rtp: rtpamrpay: RTP packet parser rtp: rtpamrdepay: RTP packet parser rtp: rtpgsmpay: RTP GSM audio payloader rtp: rtpgsmdepay: RTP packet parser rtp: rtpdepay: RTP payloader png: pngenc: PNG image encoder png: pngdec: PNG image decoder ossaudio: osssink: Audio Sink (OSS) ossaudio: osssrc: Audio Source (OSS) ossaudio: ossmixer: OSS Mixer navigationtest: navigationtest: Video navigation test multipart: multipartmux: Multipart muxer multipart: multipartdemux: Multipart demuxer mulaw: mulawdec: Mu Law audio decoder mulaw: mulawenc: Mu Law audio encoder matroska: matroskamux: Matroska muxer matroska: matroskademux: Matroska demuxer level: level: Level jpeg: smokedec: Smoke video decoder jpeg: smokeenc: Smoke video encoder jpeg: jpegdec: JPEG image decoder jpeg: jpegenc: JPEG image encoder id3demux: id3demux: ID3 tag demuxer icydemux: icydemux: ICY tag demuxer goom: goom: GOOM: what a GOOM! gdkpixbuf: gdkpixbufscale: GdkPixbuf image scaler gdkpixbuf: gdkpixbufdec: GdkPixbuf image decoder gconfelements: gconfaudiosrc: GConf audio source gconfelements: gconfaudiosink: GConf audio sink gconfelements: gconfvideosrc: GConf video source gconfelements: gconfvideosink: GConf video sink flxdec: flxdec: FLX audio decoder flac: flacdec: FLAC audio decoder flac: flacenc: FLAC audio encoder esdsink: esdsink: Esound audio sink effectv: quarktv: QuarkTV effect effectv: revtv: RevTV effect effectv: vertigotv: VertigoTV effect effectv: shagadelictv: ShagadelicTV effectv: warptv: WarpTV effect effectv: dicetv: DiceTV effect effectv: agingtv: AgingTV effect effectv: edgetv: EdgeTV effect efence: efence: Electric Fence debug: testsink: Test plugin debug: progressreport: Progress report debug: navseek: Seek based on left-right arrows debug: breakmydata: Break my data cutter: cutter: Audio cutter cairo: cairotimeoverlay: Time overlay cairo: cairotextoverlay: Text overlay avi: avimux: Avi muxer avi: avidemux: Avi demuxer autodetect: autoaudiosink: Auto audio sink autodetect: autovideosink: Auto video sink auparse: auparse: AU audio demuxer apetag: apedemux: APE tag demuxer annodex: cmmldec: CMML stream decoder annodex: cmmlenc: CMML streams encoder alphacolor: alphacolor: Alpha color filter alpha: alpha: Alpha filter alaw: alawdec: A Law audio decoder alaw: alawenc: A Law audio encoder aasink: aasink: ASCII art video sink xvimagesink: xvimagesink: Video sink ximagesink: ximagesink: Video sink vorbis: vorbisenc: Vorbis audio encoder vorbis: vorbisdec: Vorbis audio decoder vorbis: vorbisparse: VorbisParse volume: volume: Volume videotestsrc: videotestsrc: Video test source videoscale: videoscale: Video scaler videorate: videorate: Video rate adjuster typefindfunctions: video/x-ms-asf: asf, wm, wma, wmv typefindfunctions: audio/x-musepack: mpc typefindfunctions: audio/x-au: au, snd typefindfunctions: video/x-msvideo: avi typefindfunctions: video/x-cdxa: dat typefindfunctions: video/x-vcd: dat typefindfunctions: audio/x-flac: flac typefindfunctions: video/x-fli: flc, fli typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, flac, tta typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, flac, tta typefindfunctions: application/x-apetag: ape, mpc, wv typefindfunctions: audio/x-ttafile: tta typefindfunctions: audio/x-mod: 669, amf, dsm, gdm, far, imf, it, med, mod, mtm, okt, sam, s3m, stm, stx, ult, xm typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga typefindfunctions: audio/x-ac3: ac3 typefindfunctions: video/mpeg1: mpe, mpeg, mpg typefindfunctions: video/mpeg2: mpe, mpeg, mpg typefindfunctions: video/mpegts: ts typefindfunctions: application/ogg: anx, ogg, ogm typefindfunctions: video/mpeg: mpv, mpeg, mpg typefindfunctions: video/mpeg-stream: mpv, mpeg, mpg typefindfunctions: video/mpeg4: m4v typefindfunctions: audio/x-m4a: m4a typefindfunctions: application/x-3gp: 3gp typefindfunctions: video/quicktime: mov typefindfunctions: application/vnd.rn-realmedia: ra, ram, rm, rmvb typefindfunctions: application/x-shockwave-flash: swf, swfl typefindfunctions: video/x-flv: flv typefindfunctions: text/plain: txt typefindfunctions: text/uri-list: ram typefindfunctions: application/smil: smil typefindfunctions: application/xml: xml typefindfunctions: audio/x-wav: wav typefindfunctions: audio/x-aiff: aiff, aif, aifc typefindfunctions: audio/x-svx: iff, svx typefindfunctions: audio/x-paris: paf typefindfunctions: audio/x-nist: nist typefindfunctions: audio/x-voc: voc typefindfunctions: audio/x-sds: sds typefindfunctions: audio/x-ircam: sf typefindfunctions: audio/x-w64: w64 typefindfunctions: audio/x-shorten: shn typefindfunctions: application/x-ape: ape typefindfunctions: image/jpeg: jpg, jpe, jpeg typefindfunctions: image/gif: gif typefindfunctions: image/png: png typefindfunctions: image/bmp: bmp typefindfunctions: image/tiff: tif, tiff typefindfunctions: video/x-matroska: mkv, mka typefindfunctions: video/x-dv: dv, dif typefindfunctions: audio/x-amr-nb-sh: amr typefindfunctions: audio/x-amr-wb-sh: amr typefindfunctions: audio/iLBC-sh: ilbc typefindfunctions: audio/x-sid: sid typefindfunctions: image/x-xcf: xcf typefindfunctions: video/x-mng: mng typefindfunctions: image/x-jng: jng typefindfunctions: image/x-xpixmap: xpm typefindfunctions: image/x-sun-raster: ras typefindfunctions: application/x-bzip: bz2 typefindfunctions: application/x-gzip: gz typefindfunctions: application/zip: zip typefindfunctions: application/x-compress: Z typefindfunctions: audio/x-vorbis: no extensions typefindfunctions: video/x-theora: no extensions typefindfunctions: application/x-ogm-video: no extensions typefindfunctions: application/x-ogm-audio: no extensions typefindfunctions: application/x-ogm-text: no extensions typefindfunctions: audio/x-speex: no extensions typefindfunctions: application/x-ogg-skeleton: no extensions typefindfunctions: text/x-cmml: no extensions typefindfunctions: application/x-executable: no extensions typefindfunctions: adts_mpeg_stream: aac typefindfunctions: audio/x-spc: spc typefindfunctions: audio/x-wavpack: wv, wvp typefindfunctions: audio/x-wavpack-correction: wvc typefindfunctions: application/x-rar: rar typefindfunctions: application/x-tar: tar typefindfunctions: application/x-ar: a typefindfunctions: application/x-ms-dos-executable: dll, exe, ocx, sys, scr, msstyles, cpl typefindfunctions: video/x-dirac: no extensions theora: theoradec: Theora video decoder theora: theoraenc: Theora video encoder theora: theoraparse: TheoraParse tcp: tcpclientsink: TCP client sink tcp: tcpclientsrc: TCP client source tcp: tcpserversink: TCP server sink tcp: tcpserversrc: TCP server source tcp: multifdsink: Multi filedescriptor sink subparse: subparse_typefind: srt, sub, mpsub, mdvd subparse: subparse: Subtitle parser subparse: ssaparse: SSA Subtitle Parser playbin: playbin: Player Bin pango: textoverlay: Text overlay pango: timeoverlay: Time overlay pango: clockoverlay: Clock overlay pango: textrender: Text renderer ogg: oggdemux: Ogg demuxer ogg: oggmux: Ogg muxer ogg: ogmaudioparse: OGM audio stream parser ogg: ogmvideoparse: OGM video stream parser ogg: ogmtextparse: OGM text stream parser ogg: oggparse: Ogg parser gnomevfs: gnomevfssrc: GnomeVFS Source gnomevfs: gnomevfssink: GnomeVFS Sink ffmpegcolorspace: ffmpegcolorspace: FFMPEG Colorspace converter decodebin: decodebin: Decoder Bin audiotestsrc: audiotestsrc: Audio test source audioresample: audioresample: Audio scaler audiorate: audiorate: Audio rate adjuster audioconvert: audioconvert: Audio converter adder: adder: Adder coreindexers: memindex: A index that stores entries in memory coreindexers: fileindex: A index that stores entries in file coreelements: capsfilter: CapsFilter coreelements: fakesrc: Fake Source coreelements: fakesink: Fake Sink coreelements: fdsrc: Disk Source coreelements: fdsink: Filedescriptor Sink coreelements: filesrc: File Source coreelements: identity: Identity coreelements: queue: Queue coreelements: filesink: File Sink coreelements: tee: Tee pipe fitting coreelements: typefind: TypeFind staticelements: bin: Generic bin staticelements: pipeline: Pipeline object Total count: 67 plugins, 231 features $ $ pkginfo -l CSWgstplugins PKGINST: CSWgstplugins NAME: gstplugins - GStreamer plugins handling various media types CATEGORY: application ARCH: i386 VERSION: 0.10.7 BASEDIR: / VENDOR: http://ftp.acc.umu.se/pub/GNOME/sources/gst-plugins-base packaged for CSW by Ken Mays PSTAMP: thor20060814134957 INSTDATE: Aug 20 2006 00:15 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 177 installed pathnames 39 shared pathnames 48 directories 61 executables 3525 blocks used (approx) $ pkginfo -l CSWgstpluginsgood PKGINST: CSWgstpluginsgood NAME: gstplugins_good - GStreamer Plugins (Good) CATEGORY: application ARCH: i386 VERSION: 0.10.3 BASEDIR: / VENDOR: http://ftp.gnome.org/pub/gnome/sources/gst-plugins-good packaged for CSW by Ken Mays PSTAMP: thor20060822233012 INSTDATE: Sep 10 2006 00:31 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 151 installed pathnames 38 shared pathnames 39 directories 86 executables 4092 blocks used (approx) $ From maybird1776 at yahoo.com Thu Nov 23 13:20:18 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 23 Nov 2006 04:20:18 -0800 (PST) Subject: [csw-users] More Gstreamer Plugins In-Reply-To: <4564C2C9.8060204@yahoo.com> Message-ID: <519324.15543.qm@web33608.mail.mud.yahoo.com> I've added some Gstreamer plugins for review on SPARC systems: http://www.blastwave.org/testing 289831 Nov 22 23:03 gstplugins_bad-0.10.3-SunOS5.8-sparc-CSW.pkg.gz 169748 Nov 22 23:10 gstplugins_ugly-0.10.4-SunOS5.8-sparc-CSW.pkg.gz ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From maybird1776 at yahoo.com Thu Nov 23 15:45:35 2006 From: maybird1776 at yahoo.com (ken mays) Date: Thu, 23 Nov 2006 06:45:35 -0800 (PST) Subject: [csw-users] Gstreamer 0.10.10, also gst-launch and gst-inspect examples In-Reply-To: <456526C3.4080309@optonline.net> Message-ID: <544442.95298.qm@web33614.mail.mud.yahoo.com> I've upgraded gstreamer to v0.10.10 in www.blastwave.org/testing. You can see the gt-launch pipelining by doing simple commands like: bash-3.1$ gst-launch oggdemux Setting pipeline to PAUSED ... Pipeline is PREROLLED ... Setting pipeline to PLAYING ... New clock: GstSystemClock bash-3.1$ gst-inspect audiotestsrc Factory Details: Long name: Audio test source Class: Source/Audio Description: Creates audio test signals of given frequency and volume Author(s): Stefan Kost Rank: none (0) Plugin Details: Name: audiotestsrc Description: Creates audio test signals of given frequency and volum Filename: /opt/csw/lib/gstreamer-0.10/libgstaudiotestsrc.so Version: 0.10.7 License: LGPL Source module: gst-plugins-base Binary package: GStreamer Base Plug-ins source release .... Have fun, Ken Mays ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From ben at benshort.co.uk Thu Nov 23 18:48:21 2006 From: ben at benshort.co.uk (ben short) Date: Thu, 23 Nov 2006 17:48:21 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start Message-ID: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> Hi, I have install postgresql from blastwave but get the following error when I try to start it up. LOG: could not bind IPv6 socket: Cannot assign requested address HINT: Is another postmaster already running on port 5432? If not, wait a few seconds and retry. LOG: database system was shut down at 2006-11-22 16:27:16 GMT LOG: checkpoint record is at 0/33F4F0 LOG: redo record is at 0/33F4F0; undo record is at 0/0; shutdown TRUE LOG: next transaction ID: 565; next OID: 10794 LOG: next MultiXactId: 1; next MultiXactOffset: 0 LOG: database system is ready LOG: transaction ID wrap limit is 2147484146, limited by database "postgres" When I look at prstat i see several postres processes running but no postmaster. All of my config files are straight out of the box. Anyone got any ideas? Ben From dclarke at blastwave.org Thu Nov 23 19:10:28 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Thu, 23 Nov 2006 13:10:28 -0500 (EST) Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> Message-ID: <1161.24.146.17.108.1164305428.squirrel@mail.blastwave.org> > Hi, > > I have install postgresql from blastwave but get the following error > when I try to start it up. > > LOG: could not bind IPv6 socket: Cannot assign requested address > HINT: Is another postmaster already running on port 5432? If not, wait > a few seconds and retry. > LOG: database system was shut down at 2006-11-22 16:27:16 GMT > LOG: checkpoint record is at 0/33F4F0 > LOG: redo record is at 0/33F4F0; undo record is at 0/0; shutdown TRUE > LOG: next transaction ID: 565; next OID: 10794 > LOG: next MultiXactId: 1; next MultiXactOffset: 0 > LOG: database system is ready > LOG: transaction ID wrap limit is 2147484146, limited by database "postgres" > > When I look at prstat i see several postres processes running but no > postmaster. > > All of my config files are straight out of the box. > > Anyone got any ideas? well hello ! *wave* I see that you fond the maillist server in record time. Good thing too. Before we begin, what OS are you running and how did you install this PostgreSQL software? With ordinary pkg-get -i postgresql ? Dennis From pgress at optonline.net Fri Nov 24 06:54:00 2006 From: pgress at optonline.net (Paul Gress) Date: Fri, 24 Nov 2006 00:54:00 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456526C3.4080309@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> Message-ID: <456688F8.2050705@optonline.net> Removed all gst* packages and installed all new gst* packages located now on http://www.blastwave.org/testing. Gaim is still getting the "GStreamer failed to inialize" error. If you require any other output, or complete output, just request it and I'll get it out. Below are all relevant outputs from "/opt/csw/bin/gaim -d": plugins: /opt/csw/lib/gaim/gevolution.so is not loadable: ld.so.1: gaim: fatal: libebook-1.2.so.3: open failed: No such file or directory plugins: /opt/csw/lib/gaim/libsametime.so has a prefs_info, but is a prpl. This is no longer supported. sound: Initializing sound output drivers. pounce: Error reading pounces: Failed to open file '/home/Paul/.gaim/pounces.xml': No such file or directory gtkspell: Failed to setup GtkSpell: aspell: No word lists can be found for the language "en_US". Below is some other output: $ /opt/csw/bin/gst-launch oggdemux Setting pipeline to PAUSED ... Pipeline is PREROLLED ... Setting pipeline to PLAYING ... New clock: GstSystemClock ......... $ /opt/csw/bin/gst-inspect audiotestsrc Factory Details: Long name: Audio test source Class: Source/Audio Description: Creates audio test signals of given frequency and volume Author(s): Stefan Kost Rank: none (0) Plugin Details: Name: audiotestsrc Description: Creates audio test signals of given frequency and volume Filename: /opt/csw/lib/gstreamer-0.10/libgstaudiotestsrc.so Version: 0.10.7 License: LGPL Source module: gst-plugins-base Binary package: GStreamer Base Plug-ins source release Origin URL: Unknown package origin ......... $ pkginfo -l CSWgstreamer PKGINST: CSWgstreamer NAME: gstreamer - The open-source multimedia framework CATEGORY: application ARCH: i386 VERSION: 0.10.10 BASEDIR: / VENDOR: http://gstreamer.freedesktop.org/src/gstreamer packaged for CSW by Ken Mays PSTAMP: thor20061123093319 INSTDATE: Nov 23 2006 11:49 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 192 installed pathnames 54 shared pathnames 59 directories 19 executables 5859 blocks used (approx) $ pkginfo -l CSWgstplugins PKGINST: CSWgstplugins NAME: gstplugins - GStreamer plugins handling various media types CATEGORY: application ARCH: i386 VERSION: 0.10.7 BASEDIR: / VENDOR: http://ftp.acc.umu.se/pub/GNOME/sources/gst-plugins-base packaged for CSW by Ken Mays PSTAMP: thor20060814134957 INSTDATE: Aug 20 2006 00:15 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 177 installed pathnames 39 shared pathnames 48 directories 61 executables 3525 blocks used (approx) $ pkginfo -l CSWgstpluginsbad PKGINST: CSWgstpluginsbad NAME: gstplugins_bad - GStreamer Plugins (Bad) CATEGORY: application ARCH: i386 VERSION: 0.10.3 BASEDIR: / VENDOR: http://gstreamer.freedesktop.org/src/gst-plugins-bad packaged for CSW by Ken Mays PSTAMP: thor20061123102715 INSTDATE: Nov 23 2006 11:52 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 70 installed pathnames 34 shared pathnames 35 directories 11 executables 1034 blocks used (approx) $ pkginfo -l CSWgstpluginsgood PKGINST: CSWgstpluginsgood NAME: gstplugins_good - GStreamer Plugins (Good) CATEGORY: application ARCH: i386 VERSION: 0.10.3 BASEDIR: / VENDOR: http://ftp.gnome.org/pub/gnome/sources/gst-plugins-good packaged for CSW by Ken Mays PSTAMP: thor20060822233012 INSTDATE: Sep 10 2006 00:31 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 151 installed pathnames 38 shared pathnames 39 directories 86 executables 4092 blocks used (approx) $ pkginfo -l CSWgstpluginsugly PKGINST: CSWgstpluginsugly NAME: gstplugins_ugly - GStreamer Plugins (Ugly) CATEGORY: application ARCH: i386 VERSION: 0.10.4 BASEDIR: / VENDOR: http://gstreamer.freedesktop.org/src/gst-plugins-ugly packaged for CSW by Ken Mays PSTAMP: thor20061123101515 INSTDATE: Nov 23 2006 11:49 HOTLINE: http://www.blastwave.org/bugtrak/ EMAIL: kenmays at blastwave.org STATUS: completely installed FILES: 67 installed pathnames 34 shared pathnames 35 directories 9 executables 1136 blocks used (approx) From ben at benshort.co.uk Fri Nov 24 10:15:06 2006 From: ben at benshort.co.uk (ben short) Date: Fri, 24 Nov 2006 09:15:06 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <1161.24.146.17.108.1164305428.squirrel@mail.blastwave.org> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> <1161.24.146.17.108.1164305428.squirrel@mail.blastwave.org> Message-ID: <86aa493a0611240115j1ef55cb8g40c6cbe735006e24@mail.gmail.com> Hi Dennis, Heres the output from uname -a SunOS arachne 5.10 Generic_Patch_118844-30 i86pc i386 i86pc I install postgreSQL using pkg-get -i postgresql. Ben On 11/23/06, Dennis Clarke wrote: > > > Hi, > > > > I have install postgresql from blastwave but get the following error > > when I try to start it up. > > > > LOG: could not bind IPv6 socket: Cannot assign requested address > > HINT: Is another postmaster already running on port 5432? If not, wait > > a few seconds and retry. > > LOG: database system was shut down at 2006-11-22 16:27:16 GMT > > LOG: checkpoint record is at 0/33F4F0 > > LOG: redo record is at 0/33F4F0; undo record is at 0/0; shutdown TRUE > > LOG: next transaction ID: 565; next OID: 10794 > > LOG: next MultiXactId: 1; next MultiXactOffset: 0 > > LOG: database system is ready > > LOG: transaction ID wrap limit is 2147484146, limited by database "postgres" > > > > When I look at prstat i see several postres processes running but no > > postmaster. > > > > All of my config files are straight out of the box. > > > > Anyone got any ideas? > > well hello ! > > *wave* > > I see that you fond the maillist server in record time. Good thing too. > > Before we begin, what OS are you running and how did you install this > PostgreSQL software? With ordinary pkg-get -i postgresql ? > > Dennis > > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From james at blastwave.org Fri Nov 24 11:05:34 2006 From: james at blastwave.org (James Lee) Date: Fri, 24 Nov 2006 10:05:34 GMT Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> Message-ID: <20061124.10053400.2563513534@gyor.asd.demon.co.uk> On 23/11/06, 17:48:21, ben short wrote regarding [csw-users] PostgreSQL 8.1.4 - Cant start: > I have install postgresql from blastwave but get the following error > when I try to start it up. > LOG: could not bind IPv6 socket: Cannot assign requested address > HINT: Is another postmaster already running on port 5432? If not, wait > a few seconds and retry. I too see this in the log, doesn't say it's error. Is it because we don't have Ipv6 enabled? If so it's nothing to worry about. > When I look at prstat i see several postres processes running but no > postmaster. Check for postmaster with ps not prstat, in prstat the processes show as: $ prstat -c -u postgres PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 16820 postgres 21M 15M sleep 41 0 0:00.00 0.3% postgres/1 15771 postgres 21M 15M sleep 58 0 0:00.11 0.0% postgres/1 13356 postgres 21M 15M sleep 58 0 0:00.00 0.0% postgres/1 290 postgres 20M 14M sleep 48 0 0:00.20 0.0% postgres/1 13587 postgres 21M 14M sleep 48 0 0:00.00 0.0% postgres/1 16768 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 16662 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 13588 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 327 postgres 8568K 2016K sleep 58 0 0:00.00 0.0% postgres/1 326 postgres 9424K 2784K sleep 58 0 0:00.01 0.0% postgres/1 325 postgres 20M 12M sleep 59 0 0:00.17 0.0% postgres/1 Total: 11 processes, 11 lwps, load averages: 0.30, 0.14, 0.14 but as postmaster with ps: $ ps -u postgres -f UID PID PPID C STIME TTY TIME CMD postgres 325 290 0 Nov 17 ? 0:17 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 326 290 0 Nov 17 ? 0:01 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 290 1 0 Nov 17 ? 0:21 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 327 326 0 Nov 17 ? 0:01 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 13356 290 0 13:20:34 ? 0:01 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 13588 290 0 14:41:46 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 15771 290 0 02:21:24 ? 0:11 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 16662 290 0 08:24:15 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 16768 290 0 09:26:52 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 13587 290 0 14:41:46 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata postgres 16820 290 0 09:53:22 ? 0:00 /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata or with "pgrep -f postmaster". As you have postgres processes running I think it has started. > All of my config files are straight out of the box. > Anyone got any ideas? Random hints, refer to: /opt/csw/postgresql/share/doc/README-CSW.txt In particular: + Check the shared memory settings. + Did you do "/etc/init.d/cswpostgres init" ? From ben at benshort.co.uk Fri Nov 24 11:13:51 2006 From: ben at benshort.co.uk (ben short) Date: Fri, 24 Nov 2006 10:13:51 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <20061124.10053400.2563513534@gyor.asd.demon.co.uk> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> <20061124.10053400.2563513534@gyor.asd.demon.co.uk> Message-ID: <86aa493a0611240213u45ecf8b2r735b0ae6c1d9b4e@mail.gmail.com> James, Ah yes I can see the postmaster deamons when I do ps -u postgres -f. Many thanks. Ben On 11/24/06, James Lee wrote: > On 23/11/06, 17:48:21, ben short wrote regarding > [csw-users] PostgreSQL 8.1.4 - Cant start: > > > I have install postgresql from blastwave but get the following error > > when I try to start it up. > > > LOG: could not bind IPv6 socket: Cannot assign requested address > > HINT: Is another postmaster already running on port 5432? If not, wait > > a few seconds and retry. > > I too see this in the log, doesn't say it's error. Is it because we > don't have Ipv6 enabled? If so it's nothing to worry about. > > > > > When I look at prstat i see several postres processes running but no > > postmaster. > > Check for postmaster with ps not prstat, in prstat the processes show as: > > $ prstat -c -u postgres > PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP > > 16820 postgres 21M 15M sleep 41 0 0:00.00 0.3% postgres/1 > 15771 postgres 21M 15M sleep 58 0 0:00.11 0.0% postgres/1 > 13356 postgres 21M 15M sleep 58 0 0:00.00 0.0% postgres/1 > 290 postgres 20M 14M sleep 48 0 0:00.20 0.0% postgres/1 > 13587 postgres 21M 14M sleep 48 0 0:00.00 0.0% postgres/1 > 16768 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > 16662 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > 13588 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > 327 postgres 8568K 2016K sleep 58 0 0:00.00 0.0% postgres/1 > 326 postgres 9424K 2784K sleep 58 0 0:00.01 0.0% postgres/1 > 325 postgres 20M 12M sleep 59 0 0:00.17 0.0% postgres/1 > Total: 11 processes, 11 lwps, load averages: 0.30, 0.14, 0.14 > > > but as postmaster with ps: > > > $ ps -u postgres -f > UID PID PPID C STIME TTY TIME CMD > postgres 325 290 0 Nov 17 ? 0:17 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 326 290 0 Nov 17 ? 0:01 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 290 1 0 Nov 17 ? 0:21 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 327 326 0 Nov 17 ? 0:01 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 13356 290 0 13:20:34 ? 0:01 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 13588 290 0 14:41:46 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 15771 290 0 02:21:24 ? 0:11 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 16662 290 0 08:24:15 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 16768 290 0 09:26:52 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 13587 290 0 14:41:46 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > postgres 16820 290 0 09:53:22 ? 0:00 > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > > or with "pgrep -f postmaster". As you have postgres processes running I > think it has started. > > > > > > > All of my config files are straight out of the box. > > > Anyone got any ideas? > > > Random hints, refer to: > /opt/csw/postgresql/share/doc/README-CSW.txt > > In particular: > + Check the shared memory settings. > + Did you do "/etc/init.d/cswpostgres init" ? > _______________________________________________ > users mailing list > users at lists.blastwave.org > https://lists.blastwave.org/mailman/listinfo/users > From ben at benshort.co.uk Fri Nov 24 12:03:18 2006 From: ben at benshort.co.uk (ben short) Date: Fri, 24 Nov 2006 11:03:18 +0000 Subject: [csw-users] PostgreSQL 8.1.4 - Cant start In-Reply-To: <86aa493a0611240213u45ecf8b2r735b0ae6c1d9b4e@mail.gmail.com> References: <86aa493a0611230948h2b3279c8k3a6a1f76c96108ce@mail.gmail.com> <20061124.10053400.2563513534@gyor.asd.demon.co.uk> <86aa493a0611240213u45ecf8b2r735b0ae6c1d9b4e@mail.gmail.com> Message-ID: <86aa493a0611240303xb066d29ib9a4ddebf50b9c1f@mail.gmail.com> Hello again, I am able to connect to the db from the machine via pgsql and have set the postgres users password. I am connecting to the machine via putty and have forwarded local port 5432 to localhost:5432, but I can seem to connect with pgAdmin. Do i need to edit the pg_hdb.conf from its default setup? Ben On 11/24/06, ben short wrote: > James, > > Ah yes I can see the postmaster deamons when I do ps -u postgres -f. > > Many thanks. > > Ben > > > On 11/24/06, James Lee wrote: > > On 23/11/06, 17:48:21, ben short wrote regarding > > [csw-users] PostgreSQL 8.1.4 - Cant start: > > > > > I have install postgresql from blastwave but get the following error > > > when I try to start it up. > > > > > LOG: could not bind IPv6 socket: Cannot assign requested address > > > HINT: Is another postmaster already running on port 5432? If not, wait > > > a few seconds and retry. > > > > I too see this in the log, doesn't say it's error. Is it because we > > don't have Ipv6 enabled? If so it's nothing to worry about. > > > > > > > > > When I look at prstat i see several postres processes running but no > > > postmaster. > > > > Check for postmaster with ps not prstat, in prstat the processes show as: > > > > $ prstat -c -u postgres > > PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP > > > > 16820 postgres 21M 15M sleep 41 0 0:00.00 0.3% postgres/1 > > 15771 postgres 21M 15M sleep 58 0 0:00.11 0.0% postgres/1 > > 13356 postgres 21M 15M sleep 58 0 0:00.00 0.0% postgres/1 > > 290 postgres 20M 14M sleep 48 0 0:00.20 0.0% postgres/1 > > 13587 postgres 21M 14M sleep 48 0 0:00.00 0.0% postgres/1 > > 16768 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > > 16662 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > > 13588 postgres 21M 14M sleep 58 0 0:00.00 0.0% postgres/1 > > 327 postgres 8568K 2016K sleep 58 0 0:00.00 0.0% postgres/1 > > 326 postgres 9424K 2784K sleep 58 0 0:00.01 0.0% postgres/1 > > 325 postgres 20M 12M sleep 59 0 0:00.17 0.0% postgres/1 > > Total: 11 processes, 11 lwps, load averages: 0.30, 0.14, 0.14 > > > > > > but as postmaster with ps: > > > > > > $ ps -u postgres -f > > UID PID PPID C STIME TTY TIME CMD > > postgres 325 290 0 Nov 17 ? 0:17 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 326 290 0 Nov 17 ? 0:01 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 290 1 0 Nov 17 ? 0:21 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 327 326 0 Nov 17 ? 0:01 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 13356 290 0 13:20:34 ? 0:01 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 13588 290 0 14:41:46 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 15771 290 0 02:21:24 ? 0:11 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 16662 290 0 08:24:15 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 16768 290 0 09:26:52 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 13587 290 0 14:41:46 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > postgres 16820 290 0 09:53:22 ? 0:00 > > /opt/csw/postgresql/bin/sparcv8/postmaster -D /var/opt/csw/pgdata > > > > > > or with "pgrep -f postmaster". As you have postgres processes running I > > think it has started. > > > > > > > > > > > > > All of my config files are straight out of the box. > > > > > Anyone got any ideas? > > > > > > Random hints, refer to: > > /opt/csw/postgresql/share/doc/README-CSW.txt > > > > In particular: > > + Check the shared memory settings. > > + Did you do "/etc/init.d/cswpostgres init" ? > > _______________________________________________ > > users mailing list > > users at lists.blastwave.org > > https://lists.blastwave.org/mailman/listinfo/users > > > From ghenry at cmi.univ-mrs.fr Fri Nov 24 14:47:50 2006 From: ghenry at cmi.univ-mrs.fr (Gerard Henry) Date: Fri, 24 Nov 2006 14:47:50 +0100 Subject: [csw-users] installing packages in global zone, not in local? Message-ID: <4566F806.2040707@cmi.univ-mrs.fr> hello all, i have several zones on a machine. In global zone, when i install a package, it is installed in others zones is there a switch as: pkg-get -G -i evince to install it in one zone? thanks in advance gerard From asyd at asyd.net Fri Nov 24 17:16:35 2006 From: asyd at asyd.net (Bruno Bonfils) Date: Fri, 24 Nov 2006 17:16:35 +0100 Subject: [csw-users] installing packages in global zone, not in local? In-Reply-To: <4566F806.2040707@cmi.univ-mrs.fr> References: <4566F806.2040707@cmi.univ-mrs.fr> Message-ID: <20061124161635.GA7286@kaoru> On ven 24 novembre, G?rard Henry wrote: > hello all, > > i have several zones on a machine. In global zone, when i install a > package, it is installed in others zones > is there a switch as: > pkg-get -G -i evince > to install it in one zone? > > thanks in advance >From man pkgadd : -G Add package(s) in the current zone only. When used in the global zone, the package is added to the global zone only and is not propagated to any existing or yet-to-be- created non-global zone. When used in a non-global zone, the package(s) are added to the non-global zone only. % grep pkgadd /opt/csw/bin/pkg-get [..] pkgadd $PKGADDFLAGS$PKGASK -d $tmpdir $tmppkg [..] % grep PKGADDFLAGS /opt/csw/etc/pkg-get.conf #PKGADDFLAGS=-G # Solaris 10: If you wish to limit pkg-get to installing packages # ONLY to the global zone, then uncomment this line #PKGADDFLAGS=-G Best regards. -- http://asyd.net/home/ - Home Page http://guses.org/home/ - French Speaking (Open)Solaris User Group From dclarke at blastwave.org Fri Nov 24 17:29:55 2006 From: dclarke at blastwave.org (Dennis Clarke) Date: Fri, 24 Nov 2006 11:29:55 -0500 (EST) Subject: [csw-users] installing packages in global zone, not in local? In-Reply-To: <20061124161635.GA7286@kaoru> References: <4566F806.2040707@cmi.univ-mrs.fr> <20061124161635.GA7286@kaoru> Message-ID: <45688.24.146.17.108.1164385795.squirrel@mail.blastwave.org> > On ven 24 novembre, G?rard Henry wrote: >> hello all, >> >> i have several zones on a machine. In global zone, when i install a >> package, it is installed in others zones >> is there a switch as: >> pkg-get -G -i evince >> to install it in one zone? I think the answer you are looking for here is : zlogin -C -e\@ zonename then once in that zone and that zone only ! /opt/csw/bin/pkg-get -U /opt/csw/bin/pkg-get -i foo keep in mind that if you want separate package revisions in separate zones then you should not be sharing /opt/csw across all your zones. Make that zones filesystems specific to itself and you will be fine. Dennis From tmcmahon2 at yahoo.com Fri Nov 24 17:52:06 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Fri, 24 Nov 2006 11:52:06 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456688F8.2050705@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> Message-ID: <45672336.4050003@yahoo.com> Paul Gress wrote: > Removed all gst* packages and installed all new gst* packages located > now on http://www.blastwave.org/testing. Gaim is still getting the > "GStreamer failed to inialize" error. > > If you require any other output, or complete output, just request it and > I'll get it out. Apologies that I'm still beating my head on this one but I'm still not near a Solaris box. Can you make sure that the preferences have Automatic set for the gstreamer setting and what does the output of "gstreamer-properties" give you? Ken - Is sound broken for you still? I'm trying to narrow this down so if anyone does have gaim and sounds working just fine please let me know. From pgress at optonline.net Fri Nov 24 19:04:24 2006 From: pgress at optonline.net (Paul Gress) Date: Fri, 24 Nov 2006 13:04:24 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45672336.4050003@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <45672336.4050003@yahoo.com> Message-ID: <45673428.3020802@optonline.net> Torrey McMahon wrote: > Apologies that I'm still beating my head on this one but I'm still not > near a Solaris box. Can you make sure that the preferences have > Automatic set for the gstreamer setting and what does the output of > "gstreamer-properties" give you? > > Ken - Is sound broken for you still? > > I'm trying to narrow this down so if anyone does have gaim and sounds > working just fine please let me know. > _______________________________________________ > OK, ran "gstreamer-properties". Here the output: $ /opt/csw/bin/gstreamer-properties gstreamer-properties-Message: Skipping unavailable plugin 'alsasink' gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink' gstreamer-properties-Message: Skipping unavailable plugin 'polypsink' gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink' gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc' gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc' OIL: ERROR liboiltest.c 403: (): function conv_s16_f32_rintf in class conv_s16_f32 failed check (691297 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_s32_f32_rintf in class conv_s32_f32 failed check (5.62756e+10 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_s8_f32_rintf in class conv_s8_f32 failed check (2862 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_u16_f32_rintf in class conv_u16_f32 failed check (1.76926e+06 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_u32_f32_rintf in class conv_u32_f32 failed check (1.04611e+11 > 0.1) || (outside=0) OIL: ERROR liboiltest.c 403: (): function conv_u8_f32_rintf in class conv_u8_f32 failed check (6451 > 0.1) || (outside=0) gstreamer-properties-Message: Skipping unavailable plugin 'v4lsrc' gstreamer-properties-Message: Skipping unavailable plugin 'v4l2src' gstreamer-properties-Message: Skipping unavailable plugin 'alsasrc' gstreamer-properties-Message: Skipping unavailable plugin 'esdmon' gstreamer-properties-Message: Skipping unavailable plugin 'polypsrc' $ "gstreamer-properties" popped up a menu. It was set to custom. After I set it to ESD I could get a test sound. Still getting the same error with gaim and no sound. -------------- next part -------------- A non-text attachment was scrubbed... Name: snapshot1.jpg Type: image/jpeg Size: 26444 bytes Desc: not available URL: From maybird1776 at yahoo.com Fri Nov 24 19:29:04 2006 From: maybird1776 at yahoo.com (ken mays) Date: Fri, 24 Nov 2006 10:29:04 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <45672336.4050003@yahoo.com> Message-ID: <538796.87079.qm@web33608.mail.mud.yahoo.com> You can fix the code in gst/gstsound.c that initializes gstreamer. Read: http://gstreamer.freedesktop.org/data/doc/gstreamer/stable/manual/html/chapter-init.html ------------- old code -------------- #ifdef USE_GSTREAMER gaim_debug_info("sound", "Initializing sound output drivers.\n"); if ((gst_init_failed = !gst_init_check(NULL, NULL, &error))) { gaim_notify_error(NULL, _("GStreamer Failure"), _("GStreamer failed to initialize."), error ? error->message : ""); if (error) { g_error_free(error); error = NULL; } } #endif /* USE_GSTREAMER */ ------------------------------------------------ The best way, IMHO, is to check for the gst/gst.h file first to include in the code. Then, a basic gst_init(argc,argv) call should work as for the else clause. I see that GAIM checks for the initialization of gstreamer but does nothing to fix the situation - just notifies the user of the issue. Seems like a coding bug here. ~ Ken ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com From maybird1776 at yahoo.com Fri Nov 24 19:38:26 2006 From: maybird1776 at yahoo.com (ken mays) Date: Fri, 24 Nov 2006 10:38:26 -0800 (PST) Subject: [csw-users] Latest Gaim problem In-Reply-To: <45672336.4050003@yahoo.com> Message-ID: <222955.1510.qm@web33604.mail.mud.yahoo.com> There can possible be a setup issue as GAIM is trying to have Gstreamer playback *.wav files for various conditions.... ~K ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com From tmcmahon2 at yahoo.com Sat Nov 25 03:58:54 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Fri, 24 Nov 2006 21:58:54 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <45673428.3020802@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <45672336.4050003@yahoo.com> <45673428.3020802@optonline.net> Message-ID: <4567B16E.90300@yahoo.com> Paul Gress wrote: > Torrey McMahon wrote: >> Apologies that I'm still beating my head on this one but I'm still >> not near a Solaris box. Can you make sure that the preferences have >> Automatic set for the gstreamer setting and what does the output of >> "gstreamer-properties" give you? >> >> Ken - Is sound broken for you still? >> [SNIP] > > > "gstreamer-properties" popped up a menu. It was set to custom. After > I set it to ESD I could get a test sound. Still getting the same > error with gaim and no sound. I would think the default output would be "Automatic". I'm not a gstreamer expert though so ... Ken? From ghenry at cmi.univ-mrs.fr Mon Nov 27 13:20:04 2006 From: ghenry at cmi.univ-mrs.fr (=?ISO-8859-1?Q?G=E9rard_Henry?=) Date: Mon, 27 Nov 2006 13:20:04 +0100 Subject: [csw-users] trouble with postfix installation Message-ID: <456AD7F4.9@cmi.univ-mrs.fr> hello all, i installed postfix on solaris 10 x86, and it's okay (modulo a minimal trouble, see http://www.blastwave.org/mantis/view_bug_page.php?f_id=1943). Now, i'm installing it on sparc machine, again solaris 10, and during installation, i got this strane messages: ... ERROR: attribute verification of failed group name not found in group table(s) ... ERROR: attribute verification of failed group name not found in group table(s) ... At the beginning of installation, pkg-get said: The following files are already installed on the system and are being used by another package: /etc /etc/init.d * /opt/csw/var/spool * - conflict with a file which does not belong to any package. Do you want to install these conflicting files [y,n,?,q] n PS: postdrop is well created in /etc/group mombasa-root% /etc/init.d/cswpostfix check postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/var/spool/postfix/public postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/var/spool/postfix/maildrop postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/sbin/postqueue postfix/postfix-script: warning: not owned by group postdrop: /opt/csw/sbin/postdrop And this happen on a nis client client. Doing the same install install on a non-nis machine, everything go well. I verified that group id aren'nt used in NIS table. Anybody else using postfix from blastwave? gerard From tmcmahon2 at yahoo.com Mon Nov 27 23:03:15 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Mon, 27 Nov 2006 17:03:15 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456688F8.2050705@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> Message-ID: <456B60A3.5050903@yahoo.com> Paul Gress wrote: > Removed all gst* packages and installed all new gst* packages located > now on http://www.blastwave.org/testing. Gaim is still getting the > "GStreamer failed to inialize" error. > > If you require any other output, or complete output, just request it and > I'll get it out. I pinged some of the gaim crew and they said this seems to be happening with a lot of people. Could you try setting the GST_REGISTRY_FORK environment variable to "no" and rerunning gaim -d? From pgress at optonline.net Tue Nov 28 07:19:14 2006 From: pgress at optonline.net (Paul Gress) Date: Tue, 28 Nov 2006 01:19:14 -0500 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456B60A3.5050903@yahoo.com> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <456B60A3.5050903@yahoo.com> Message-ID: <456BD4E2.2080807@optonline.net> Torrey McMahon wrote: > Paul Gress wrote: > >> Removed all gst* packages and installed all new gst* packages located >> now on http://www.blastwave.org/testing. Gaim is still getting the >> "GStreamer failed to inialize" error. >> >> If you require any other output, or complete output, just request it and >> I'll get it out. >> > > I pinged some of the gaim crew and they said this seems to be happening > with a lot of people. Could you try setting the GST_REGISTRY_FORK > environment variable to "no" and rerunning gaim -d? > OK, That worked. No GStreamer failed to initialize" error, and sound works, though it's still set on ESD for sound. So, I'll just set up a wrapper script to set GST_REGESTRY_FORK=no. Below is the full output of gaim -d. Thanks, Paul $ GST_REGISTRY_FORK=no $ export GST_REGISTRY_FORK $ echo $GST_REGISTRY_FORK no $ /opt/csw/bin/gaim -d plugins: probing /opt/csw/lib/gaim/extplacement.so plugins: probing /opt/csw/lib/gaim/gaimrc.so plugins: probing /opt/csw/lib/gaim/gestures.so plugins: probing /opt/csw/lib/gaim/gevolution.so plugins: /opt/csw/lib/gaim/gevolution.so is not loadable: ld.so.1: gaim: fatal: libebook-1.2.so.3: open failed: No such file or directory plugins: probing /opt/csw/lib/gaim/history.so plugins: probing /opt/csw/lib/gaim/iconaway.so plugins: probing /opt/csw/lib/gaim/idle.so plugins: probing /opt/csw/lib/gaim/libgg.so plugins: probing /opt/csw/lib/gaim/libirc.so plugins: probing /opt/csw/lib/gaim/libjabber.so plugins: probing /opt/csw/lib/gaim/libmsn.so plugins: probing /opt/csw/lib/gaim/libnovell.so plugins: probing /opt/csw/lib/gaim/liboscar.so plugins: probing /opt/csw/lib/gaim/libqq.so plugins: probing /opt/csw/lib/gaim/libsametime.so plugins: /opt/csw/lib/gaim/libsametime.so has a prefs_info, but is a prpl. This is no longer supported. plugins: probing /opt/csw/lib/gaim/libsimple.so plugins: probing /opt/csw/lib/gaim/libyahoo.so plugins: probing /opt/csw/lib/gaim/libzephyr.so plugins: probing /opt/csw/lib/gaim/log_reader.so plugins: probing /opt/csw/lib/gaim/notify.so plugins: probing /opt/csw/lib/gaim/psychic.so plugins: probing /opt/csw/lib/gaim/relnot.so plugins: probing /opt/csw/lib/gaim/spellchk.so plugins: probing /opt/csw/lib/gaim/ssl-gnutls.so plugins: probing /opt/csw/lib/gaim/ssl-nss.so plugins: probing /opt/csw/lib/gaim/ssl.so plugins: probing /opt/csw/lib/gaim/statenotify.so plugins: probing /opt/csw/lib/gaim/tcl.so plugins: probing /opt/csw/lib/gaim/ticker.so plugins: probing /opt/csw/lib/gaim/timestamp.so plugins: probing /opt/csw/lib/gaim/timestamp_format.so util: Reading file accounts.xml from directory /home/Paul/.gaim util: Reading file status.xml from directory /home/Paul/.gaim stun: using server stun: using server sound: Initializing sound output drivers. util: Reading file blist.xml from directory /home/Paul/.gaim prefs: Reading /home/Paul/.gaim/prefs.xml prefs: Finished reading /home/Paul/.gaim/prefs.xml pounce: Error reading pounces: Failed to open file '/home/Paul/.gaim/pounces.xml': No such file or directory Session Management: ICE initialized. Session Management: Connecting with no previous ID Session Management: Handling new ICE connection... done. Session Management: Connected to manager (GnomeSM) with client ID 11c0a80067000116469461100000007890015 Session Management: Using /opt/csw/bin/gaim as command gtkspell: Failed to setup GtkSpell: aspell: No word lists can be found for the language "en_US". account: Connecting to account radical 1won connection: Connecting. gc = 85b2188 oscar: registered module misc (family 0xffff, version = 0x0000, tool 0x0000, tool version 0x0000) oscar: registered module oservice (family 0x0001, version = 0x0003, tool 0x0110, tool version 0x0629) oscar: registered module locate (family 0x0002, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module buddy (family 0x0003, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module messaging (family 0x0004, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module advert (family 0x0005, version = 0x0001, tool 0x0001, tool version 0x0001) oscar: registered module invite (family 0x0006, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module admin (family 0x0007, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module popup (family 0x0008, version = 0x0001, tool 0x0104, tool version 0x0001) oscar: registered module bos (family 0x0009, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module userlookup (family 0x000a, version = 0x0001, tool 0x0110, tool version 0x0629) oscar: registered module stats (family 0x000b, version = 0x0001, tool 0x0104, tool version 0x0001) oscar: registered module translate (family 0x000c, version = 0x0001, tool 0x0104, tool version 0x0001) oscar: registered module chatnav (family 0x000d, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module chat (family 0x000e, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module odir (family 0x000f, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module bart (family 0x0010, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: registered module feedbag (family 0x0013, version = 0x0004, tool 0x0110, tool version 0x0629) oscar: registered module icq (family 0x0015, version = 0x0001, tool 0x0110, tool version 0x047c) oscar: registered module auth (family 0x0017, version = 0x0000, tool 0x0000, tool version 0x0000) oscar: registered module alert (family 0x0018, version = 0x0001, tool 0x0010, tool version 0x0629) oscar: Adding handler for ffff/0003 oscar: Adding handler for ffff/0006 oscar: Adding handler for 0007/0003 oscar: Adding handler for 0007/0005 oscar: Adding handler for 0007/0007 oscar: Adding handler for 0018/0001 oscar: Adding handler for 0018/0007 oscar: Adding handler for 0017/0003 oscar: Adding handler for 0017/0007 oscar: Adding handler for 0017/000a oscar: Adding handler for 0010/0001 oscar: Adding handler for 0010/0005 oscar: Adding handler for 0009/0001 oscar: Adding handler for 0009/0003 oscar: Adding handler for 0003/0001 oscar: Adding handler for 0003/0003 oscar: Adding handler for 0003/000b oscar: Adding handler for 0003/000c oscar: Adding handler for 000e/0001 oscar: Adding handler for 000e/0003 oscar: Adding handler for 000e/0004 oscar: Adding handler for 000e/0002 oscar: Adding handler for 000e/0006 oscar: Adding handler for 000d/0001 oscar: Adding handler for 000d/0009 oscar: Adding handler for 0013/0001 oscar: Adding handler for 0013/0003 oscar: Adding handler for 0013/0006 oscar: Adding handler for 0013/000e oscar: Adding handler for 0013/0008 oscar: Adding handler for 0013/0015 oscar: Adding handler for 0013/0019 oscar: Adding handler for 0013/001b oscar: Adding handler for 0013/001c oscar: Adding handler for 0004/0005 oscar: Adding handler for 0004/0007 oscar: Adding handler for 0004/000a oscar: Adding handler for 0004/000b oscar: Adding handler for 0004/0001 oscar: Adding handler for 0004/0014 oscar: Adding handler for 0004/000c oscar: Adding handler for 0015/00f0 oscar: Adding handler for 0015/00f1 oscar: Adding handler for 0015/00f3 oscar: Adding handler for 0015/00f2 oscar: Adding handler for 0002/0003 oscar: Adding handler for 0002/0006 oscar: Adding handler for 0002/0001 oscar: Adding handler for 0002/fffd oscar: Adding handler for 0001/0001 oscar: Adding handler for 0001/000f oscar: Adding handler for 0001/001f oscar: Adding handler for 0001/0021 oscar: Adding handler for 0001/000a oscar: Adding handler for 0001/0005 oscar: Adding handler for 0001/0013 oscar: Adding handler for 0001/0010 oscar: Adding handler for 0008/0002 oscar: Adding handler for 000a/0001 oscar: Adding handler for 000a/0003 oscar: oscar_login: gc = 85b2188 util: requested to fetch (http://192.168.0.1:49152/gatedesc.xml), full=1, user_agent=((null)), http11=1 Session Management: Received first save_yourself dnsquery: IP resolved for login.oscar.aol.com proxy: Attempting connection to 64.12.200.89 proxy: Connecting to login.oscar.aol.com:5190 with no proxy proxy: Connection in progress Session Management: Received save_complete dnsquery: IP resolved for 192.168.0.1 proxy: Attempting connection to 192.168.0.1 proxy: Connecting to 192.168.0.1:49152 with no proxy proxy: Connection in progress proxy: Connected. util: Request: 'GET /gatedesc.xml HTTP/1.1 Connection: close Host: 192.168.0.1:49152 ' util: Response headers: 'HTTP/1.1 200 OK CONTENT-LENGTH: 3424 CONTENT-TYPE: text/xml DATE: Tue, 28 Nov 2006 06:17:17 GMT LAST-MODIFIED: Sat, 01 Jan 2000 00:00:07 GMT SERVER: Linux/2.4.26-uc0, UPnP/1.0, Intel SDK for UPnP devices /1.2 CONNECTION: close ' util: parsed 3424 proxy: Connected. oscar: connected to FLAP server of type 0x0017 oscar: Screen name sent, waiting for response util: requested to fetch (http://192.168.0.1:49152/upnp/control/WANIPConn1), full=0, user_agent=((null)), http11=1 dnsquery: IP resolved for 192.168.0.1 proxy: Attempting connection to 192.168.0.1 proxy: Connecting to 192.168.0.1:49152 with no proxy proxy: Connection in progress dnsquery: IP resolved for 192.168.0.1 proxy: Attempting connection to 192.168.0.1 proxy: Connecting to 192.168.0.1:49152 with no proxy proxy: Connection in progress proxy: Connected. util: Request: 'POST /upnp/control/WANIPConn1 HTTP/1.1 HOST: 192.168.0.1:49152 SOAPACTION: "urn:schemas-upnp-org:service:WANIPConnection:1#GetExternalIPAddress" CONTENT-TYPE: text/xml ; charset="utf-8" CONTENT-LENGTH: 310 ' proxy: Connected. upnp: Local IP: 192.168.0.103 oscar: inside auth_resp (Screen name: radical 1won) oscar: Reg status: 3 oscar: E-mail: radical1won at netscape.net oscar: BOSIP: 205.188.10.186:5190 oscar: Closing auth connection... oscar: Scheduling destruction of FLAP connection of type 0x0017 oscar: Destroying oscar connection of type 0x0017 dnsquery: IP resolved for 205.188.10.186 proxy: Attempting connection to 205.188.10.186 proxy: Connecting to 205.188.10.186:5190 with no proxy proxy: Connection in progress proxy: Connected. oscar: connected to FLAP server of type 0x0002 oscar: MOTD: Unknown (5) oscar: FLAP connection of type 0x0002 is now fully connected oscar: ssi: requesting rights and list oscar: locate rights: max sig len = 4096 oscar: buddy list rights: Max buddies = 1000 / Max watchers = 2000 oscar: BOS rights: Max permit = 1000 / Max deny = 1000 buddyicon: Wrote file /home/Paul/.gaim/icons/91a512b0 buddyicon: Uncached file 511b332d buddyicon: Wrote file /home/Paul/.gaim/icons/b5688394 buddyicon: Uncached file c06d1808 connection: Activating keepalive. oscar: buddy list loaded oscar: ssi rights: max type 0x0000=3000, max type 0x0001=61, max type 0x0002=1000, max type 0x0003=1000, max type 0x0004=1, max type 0x0005=1, max type 0x0006=150, max type 0x0007=12, max type 0x0008=12, max type 0x0009=3, max type 0x000a=50, max type 0x000b=50, max type 0x000c=0, max type 0x000d=0, max type 0x000e=0, max type 0x000f=0, max type 0x0010=0, max type 0x0011=1, max type 0x0012=0, max type 0x0013=0, max type 0x0014=15, max type 0x0015=1, max type 0x0016=40, max type 0x0017=1, max type 0x0018=10, max type 0x0019=200, max type 0x001a=1, max type 0x001b=0, max type 0x001c=200, max type 0x001d=1, max type 0x001e=8, max type 0x001f=20, max type 0x0020=0, max type 0x0021=10000, max type 0x0022=1000, max type 0x0023=1000, oscar: ssi: syncing local list and server list oscar: ssi: activating server-stored buddy list blist: Updating buddy status for xxRatxx xxBoyxx (AIM/ICQ) blist: Updating buddy status for xxRatxx xxBoyxx (AIM/ICQ) oscar: Connecting to FLAP server 205.188.248.149:5190 of type 0x0018 dnsquery: IP resolved for 205.188.248.149 proxy: Attempting connection to 205.188.248.149 proxy: Connecting to 205.188.248.149:5190 with no proxy proxy: Connection in progress oscar: Connecting to FLAP server 205.188.176.90:5190 of type 0x000d proxy: Connected. oscar: connected to FLAP server of type 0x0018 dnsquery: IP resolved for 205.188.176.90 proxy: Attempting connection to 205.188.176.90 proxy: Connecting to 205.188.176.90:5190 with no proxy proxy: Connection in progress proxy: Connected. oscar: connected to FLAP server of type 0x000d oscar: FLAP connection of type 0x0018 is now fully connected oscar: FLAP connection of type 0x000d is now fully connected oscar: chat info: Chat Rights: oscar: chat info: Max Concurrent Rooms: 10 oscar: chat info: Exchange List: (16 total) oscar: chat info: 20 oscar: chat info: 16 oscar: chat info: 15 oscar: chat info: 14 oscar: chat info: 13 oscar: chat info: 12 oscar: chat info: 11 oscar: chat info: 10 oscar: chat info: 9 oscar: chat info: 8 oscar: chat info: 7 oscar: chat info: 6 oscar: chat info: 5 oscar: chat info: 4 oscar: chat info: 2 oscar: chat info: 1 util: Response headers: 'HTTP/1.1 200 OK CONTENT-LENGTH: 339 CONTENT-TYPE: text/xml; charset="utf-8" DATE: Tue, 28 Nov 2006 06:17:19 GMT EXT: SERVER: Linux/2.4.26-uc0, UPnP/1.0, Intel SDK for UPnP devices /1.2 ' util: parsed 339 upnp: NAT Returned IP: 24.45.216.147 util: Writing file accounts.xml to directory /home/Paul/.gaim util: Writing file blist.xml to directory /home/Paul/.gaim account: Disconnecting account 819a550 connection: Disconnecting connection 85b2188 connection: Deactivating keepalive. oscar: Destroying oscar connection of type 0x000d oscar: Destroying oscar connection of type 0x0018 oscar: Destroying oscar connection of type 0x0002 oscar: Signed off. connection: Destroying connection 85b2188 util: Writing file blist.xml to directory /home/Paul/.gaim main: Unloading all plugins plugins: Unloading plugin Gadu-Gadu plugins: Unloading plugin IRC plugins: Unloading plugin Jabber plugins: Unloading plugin MSN plugins: Unloading plugin GroupWise plugins: Unloading plugin AIM/ICQ plugins: Unloading plugin QQ plugins: Unloading plugin Sametime plugins: Unloading plugin SIMPLE plugins: Unloading plugin Yahoo plugins: Unloading plugin Zephyr plugins: Unloading plugin Tcl Plugin Loader Session Management: Handling closed ICE connection... done. Session Management: Connection closed. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. accels: accel changed, scheduling save. $ From yann.rouillard at jouy.inra.fr Wed Nov 29 12:12:29 2006 From: yann.rouillard at jouy.inra.fr (Yann Rouillard) Date: Wed, 29 Nov 2006 12:12:29 +0100 Subject: [csw-users] cyrus imapd In-Reply-To: References: Message-ID: <456D6B1D.3000004@jouy.inra.fr> > Second: > > Today i updated my cyrus imapd Server to the recent stable version. I > experienced some difficulties during the update procedure. ( I would > love to file a mantis entry. But i am still waiting for the EMail :) mantis is a better way to report bug as I don't always follow the csw user list. > Installing cyrus_imapd - Pop and Imap server from the Cyrus mail system > as > > ## Executing preinstall script. > /var/sadm/pkg/CSWcyrusimapd/install/preinstall: /usr/bin/getent: not found > Creating cyrus user... > UX: /usr/sbin/useradd: ERROR: cyrus is already in use. Choose another. > pkgadd: ERROR: preinstall script did not complete successfully the getent binary is usually present on defaut solaris install, it's in the package SUNWnisu, you can install it to quickly solve this bug But I will try to update the package to not require this binary (or to explicitely depend on this package). > Then, if you try to solve this problem with removing the cyrus user and > pkgrm the package you ran into the next problem. The preinstall script > is not forcing a unique uid for the cyrus user and therefore > /opt/csw/var/cyrus/mail is not accessible. There is no policy for uids, so I can't force a unique uid as it could collide with a currently used uid. But this bug only happen because the preinstall script didn't work as expected. You can solve your problem by doing this: chown -R cyrus:mail /opt/csw/var/cyrus /opt/csw/etc/cyrus Yann From aaron at ernieball.com Wed Nov 29 16:48:15 2006 From: aaron at ernieball.com (Aaron Wilson) Date: Wed, 29 Nov 2006 07:48:15 -0800 Subject: [csw-users] Latest Gaim problem In-Reply-To: <456BD4E2.2080807@optonline.net> References: <20061122115138.40144.qmail@web33613.mail.mud.yahoo.com> <4564A9D1.3030307@yahoo.com> <4564AEDD.1050806@ernieball.com> <4564C2C9.8060204@yahoo.com> <456526C3.4080309@optonline.net> <456688F8.2050705@optonline.net> <456B60A3.5050903@yahoo.com> <456BD4E2.2080807@optonline.net> Message-ID: <456DABBF.4040800@ernieball.com> An HTML attachment was scrubbed... URL: From tmcmahon2 at yahoo.com Wed Nov 29 21:51:16 2006 From: tmcmahon2 at yahoo.com (Torrey McMahon) Date: Wed, 29 Nov 2006 15:51:16 -0500 Subject: [csw-users] Gaim audio problems Message-ID: <456DF2C4.9000500@yahoo.com> For those still seeing gaim audio problems if you could try the following I'd appreciate it. * Bring up /usr/dt/bin/sdtaudio and play /opt/csw/share/sounds/gaim/logout.wav * If that works try " /opt/csw/bin/gst-launch playbin uri=file:///usr/share/sounds/gaim/logout.wav " * Then open /opt/csw/bin/gstreamer-properties and tell me what's in the "Default Output Plugin" fields. Hit the test button and see if you get anything. On my Solaris 11 laptop with the latest gstreamer bits I can get sdtaudio to play sounds but gst-launch just runs and runs and runs with no audio ever coming. When I run the gstreamer-properties program with "Custom" and "sunaudiosink" as the Pipeline I get an error pop-up that says ' Custom: no element "sunaudiosink" ' From amit.uttam at gmail.com Wed Nov 29 23:55:01 2006 From: amit.uttam at gmail.com (Amit) Date: Wed, 29 Nov 2006 14:55:01 -0800 Subject: [csw-users] Firefox start up issues on Solaris 8 Message-ID: <90ee5fbb0611291455l216484e7vc56daea404b4304e@mail.gmail.com> Hey guys, I've been using blastwave for quite some time now. No major problems. However, there were a few issues with running firefox under Solaris 8. Here are the steps that I took: 1. Fresh install of Solaris 8 06/00 (Developer User Support Install) 2. Installed all the latest patches using 'pca' (Patch Check Advance) 3. Firefox started from commandline with the following command: firefox. Currently logged in as root. (root homedir = /root) Issues: 1. Firefox complains off 108652-79 not being installed (Xsun patch). However, this has been obsoleted by 119067-05 (which is installed on the system). 2. Firefox complains off 108435 not being installed. Tried installing 108435-22 (32-bit version) and patchadd terminates with the error "one or more packages included in 108435-22 is not installed in this system." 3. Firefox constantly prompts the default browser question at startup. Running firefox as a regular user eliminates this issue. Looks like firefox settings are not saved in the /root homedir. Thanks for the wonderful work and your help. Amit