[csw-users] installing pgp
Glen Gunselman
ggunselm at emporia.edu
Fri Feb 26 18:05:33 CET 2010
Sebastian,
Thanks for the help/advice.
I see just the one url in pkg-get.conf
grep url /opt/csw/etc/pkg-get.conf
# url=http://ibiblio.org/pub/packages/solaris/csw/unstable
url=http://www.ibiblio.org/pub/packages/solaris/opencsw/current
#url=http://mirrors.usc.edu/pub/blastwave/unstable
# See above url for other sites to use.
The pkgutil output is not that long so:
pkgutil -V
- System -
Pkgutil 1.9.1
Arch sparc
Solaris 5.10
Pkg patch 119317 (119317-01 installed)
GPG binary /opt/csw/bin/gpg
Gzip binary /bin/gzip
Mailx binary /bin/mailx
MD5 binary not found (suggestion: install CSWtextutils)
MD5 module 2.33 (primary choice for MD5)
Perl 5.008004
Perl binary /usr/bin/perl
Wget binary /usr/sfw/bin/wget
PATH /usr/bin:/usr/sbin:/usr/ccs/bin:/opt/csw/bin:/usr/sbin:/usr/bin
- Configuration -
catalog_update 14 (default: 14)
exclude_pattern not set (default: none)
maxpkglist not set (default: 25000)
mirror http://ibiblio.org/pub/packages/solaris/opencsw/current
(default: http://ibiblio.org/pub/packages/solaris/opencsw/current)
noncsw not set (default: false)
pkgaddopts not set (default: none)
pkgliststyle not set (default: 0)
stop_on_hook_soft_error not set (default: false)
use_gpg not set (default: false)
use_md5 not set (default: false)
wgetopts not set (default: none)
pkgutil -C
package installed catalog
CSWbdb44 4.4.20,REV=2009.03.17 4.4.20,REV=2009.10.18_rev=p4
CSWfconfig 2.3.2,REV=2009.01.28 2.6.0,REV=2009.04.24
CSWftype2 2.3.8,REV=2009.02.16 2.3.9,REV=2009.09.11
CSWgawk 3.1.5 3.1.7,REV=2009.09.15
CSWglib2 2.16.3 2.20.0,REV=2009.04.08
CSWlibcairo 1.4.10 1.8.8,REV=2010.01.18
CSWlibpopt 1.14,REV=2009.02.24 1.15,REV=2009.10.29
CSWlibxft2 2.1.6,REV=2005.02.01 2.1.14,REV=2010.02.19
CSWlibxml2 2.7.2,REV=2008.12.09 2.7.6,REV=2009.12.17
CSWlibxrender 0.8.3,REV=2004.03.31 0.9.5,REV=2010.02.19
CSWorca r535,REV=2009.03.19 snapshot_r535,REV=2009.11.25
CSWpango 1.19.1 1.24.5,REV=2009.09.04
CSWperl 5.8.8,REV=2008.10.08 5.8.8,REV=2009.11.12
CSWpkgget 4.1.2,REV=2009.03.19 4.3,REV=2009.10.04
CSWpng 1.2.35,REV=2009.02.19 1.2.42,REV=2010.01.03
CSWrenderdev 0.8,REV=2004.03.30 not in catalog
CSWrrd 1.3.6,REV=2009.03.23 1.3.8,REV=2009.05.19
CSWrsync 3.0.2 3.0.6,REV=2009.09.21
CSWsudo 1.6.9p8,REV=2007.11.02 1.7.2,REV=2009.10.05_rev=p1
CSWsudo-common 1.6.9p8,REV=2007.11.05 1.7.2,REV=2009.10.05_rev=p1
The only packages I see that I use directly are CSWorca (orca uses CSWrrd, but not on this server), CSWpkgget, CSWrsync, and CSWsudo.
Thanks,
Glen Gunselman
Systems Software Specialist
TCS
Emporia State University
>>> Sebastian Kayser <skayser at opencsw.org> 2/25/2010 4:55 PM >>>
Hi Glen,
Glen Gunselman wrote on 25.02.2010 22:42:
>
> I've been asked to install pgp on a few servers. I see both gnupg and
> gnupg2 in the packages list. I thought I'd start with gnupg as it has a
> shorter dependancies list.
>
> A /opt/csw/bin/pkg-get -c|grep -v 'Not installed' shows:
> WARNING: gpg not found
> # (From site http://www.ibiblio.org/pub/packages/solaris/opencsw/current )
> software localrev remoterev
>
> [... list of version comparisons ...]
>
> Note: rrdtool 1.3.6,REV=2009.03.23 1.3.4,REV=2008.12.05
>
> If I run /opt/csw/bin/pkg-get -u will rrdtool be down leveled?
I am more familiar with pkgutil and haven't used pkg-get for a while,
but if you are using the current/ release branch (judging from the "From
site" output above) there are a couple of "remoterev" versions in the
list of yours which should definitely be more up to date. For reference
purposes: our website lists the package versions which are in the
current catalog. What's the mirror url setting in your pkg-get.conf?
To better troubleshoot this, could you please install pkgutil 1.9.1 and
run a couple of diagnostic commands.
1) Remove old pkgutil, download/install pkgutil 1.7
pkgrm CSWpkgutil
wget http://mirror.opencsw.org/opencsw/official/pkgutil-`uname -p`.pkg
pkgadd -d pkgutil-`uname -p`.pkg
<configure your mirror in /etc/opt/csw/pkgutil.conf>
2) Upgrade to pkgutil 1.9.1 (should not pull in any deps)
pkgutil -Uu pkgutil
3) Run diagnostic commands
pkgutil -V
pkgutil -U
pkgutil -C
This will display some diagnostic information (-V), fetch the current
catalogs (-U) and then compare your currently installed packages to the
ones on the mirror (-C, only displays different versions). You can use
something like http://pastebin.com/ to post outputs when they tend to
get long.
Sebastian
_______________________________________________
users mailing list
users at lists.opencsw.org
https://lists.opencsw.org/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100226/df070f39/attachment.html>
More information about the users
mailing list