From bonivart at opencsw.org  Tue Jul  6 23:54:01 2010
From: bonivart at opencsw.org (Peter Bonivart)
Date: Tue, 6 Jul 2010 23:54:01 +0200
Subject: [csw-users] /testing milter-greylist
Message-ID: <AANLkTilB3U1EndIYzIvQ7z2zfHPfYXJZ6BokWZWJmL_0@mail.gmail.com>

Hi,

I have built a new version of this greylisting package for Sendmail
(and possibly Postfix). It supports both GeoIP and SPF2 to validate the
senders. I would appreciate it if someone could help with testing on
an actual mail server. All my clients have change stops during the
summer so I have only done local tests on virtualbox.

More info about milter-greylist is available here:
http://milter-greylist.wikidot.com/. It uses an in-memory db and it's
very flexible to configure.

You can find the packages here:
http://mirror.opencsw.org/experimental.html#bonivart.

-- 
/peter

From gadavis at ucsd.edu  Thu Jul  8 02:51:58 2010
From: gadavis at ucsd.edu (Geoff Davis)
Date: Wed, 7 Jul 2010 17:51:58 -0700
Subject: [csw-users] NRPE doesn't create service manifests on install unless
	/etc/opt/csw/init.d exists
Message-ID: <679ED127-A3D7-491F-A276-CE1973714685@ucsd.edu>

Hi all,

I know that there's been a bit of work going on with the cswclassutils package of late, but I'm not sure where this problem should get reported.

The problem is that CSWnrpe doesn't create a service manifest upon installation unless the directory /etc/opt/csw/init.d exists prior to installation. We're using version nrpe 2.12,REV=2009.06.25, and cswclassutils 1.38,REV=2010.06.15

Thanks,
Geoff Davis
Scripps Institution of Oceanography
gadavis at ucsd.edu, (858) 822-5756




From maciej at opencsw.org  Thu Jul  8 12:18:09 2010
From: maciej at opencsw.org (Maciej (Matchek) Blizinski)
Date: Thu, 8 Jul 2010 11:18:09 +0100
Subject: [csw-users] NRPE doesn't create service manifests on install
	unless /etc/opt/csw/init.d exists
In-Reply-To: <679ED127-A3D7-491F-A276-CE1973714685@ucsd.edu>
References: <679ED127-A3D7-491F-A276-CE1973714685@ucsd.edu>
Message-ID: <AANLkTinLmOHgRuWEvHdZTkNvGwisTGF76SFA1ofQ2xkk@mail.gmail.com>

No dia 8 de Julho de 2010 01:51, Geoff Davis <gadavis at ucsd.edu> escreveu:
> I know that there's been a bit of work going on with the cswclassutils package of late, but I'm not sure where this problem should get reported.

There was more of discussions than any actual work.  There seems to be
agreement that Phil's ugly hack based on an obscure documented
behavior would do the job, but nobody sprang to coding.  I personally
don't care about the NFS setup, so I'll let the NFS supporters
implement the solution.

> The problem is that CSWnrpe doesn't create a service manifest upon installation unless the directory /etc/opt/csw/init.d exists prior to installation. We're using version nrpe 2.12,REV=2009.06.25, and cswclassutils 1.38,REV=2010.06.15

I used to think that CSWcommon contained it, but apparently, I'm wrong:

http://www.opencsw.org/packagesContainingFile/?fileName=%2Fetc%2Fopt%2Fcsw%2Finit.d&queryType=exact

I also thought that GAR removed this directory by default.  However,
it's not on the list of common directories:

https://gar.svn.sourceforge.net/svnroot/gar/csw/mgar/gar/v2/etc/commondirs-sparc

I thought that the way it works is that either every package provides
its own /etc/opt/csw/init.d, or that CSWcommon provides it.  Right
now, it looks like none of that is true, so I don't know how this
could ever work.

Can the elders shed any light on the issue?

From bonivart at opencsw.org  Thu Jul  8 12:48:24 2010
From: bonivart at opencsw.org (Peter Bonivart)
Date: Thu, 8 Jul 2010 12:48:24 +0200
Subject: [csw-users] NRPE doesn't create service manifests on install
	unless /etc/opt/csw/init.d exists
In-Reply-To: <AANLkTinLmOHgRuWEvHdZTkNvGwisTGF76SFA1ofQ2xkk@mail.gmail.com>
References: <679ED127-A3D7-491F-A276-CE1973714685@ucsd.edu> 
	<AANLkTinLmOHgRuWEvHdZTkNvGwisTGF76SFA1ofQ2xkk@mail.gmail.com>
Message-ID: <AANLkTilIeUejQpYGB4N3uTNxwLAHZX61GGHVq0_NuxQK@mail.gmail.com>

On Thu, Jul 8, 2010 at 12:18 PM, Maciej (Matchek) Blizinski
<maciej at opencsw.org> wrote:
> I thought that the way it works is that either every package provides
> its own /etc/opt/csw/init.d, or that CSWcommon provides it. ?Right
> now, it looks like none of that is true, so I don't know how this
> could ever work.
>
> Can the elders shed any light on the issue?

This never happened before because cswclassutils have always provided
a sample init file to /etc/opt/csw/init.d. With the latest flipflop
regarding NFS the sample was moved to /opt/csw/etc/init.d in May. Thus
nothing creates the /etc/opt/csw/init.d directory any more.

-- 
/peter

From ja at opencsw.org  Sun Jul 11 19:55:25 2010
From: ja at opencsw.org (Juergen Arndt)
Date: Sun, 11 Jul 2010 19:55:25 +0200
Subject: [csw-users] Munin 1.4.5 in experimental
Message-ID: <0D0D6119-7AEC-4A83-B733-AB955BAED071@opencsw.org>

Hi there,

there are new packages for Munin available from
http://mirror.opencsw.org/experimental.html#ja

Feedback is very welcome.

Juergen

-- 
Juergen Arndt


From guillaume.jaquet at gmail.com  Mon Jul 12 12:52:37 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Mon, 12 Jul 2010 12:52:37 +0200
Subject: [csw-users] welcome questions to pkg-get
Message-ID: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>

Hello

We utlise PKG-GET and we're happy, we would like to know how the PKG-GET is
to find all the dependency of a package?

Thank you,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100712/62fa5bb1/attachment.html>

From blizinski at google.com  Mon Jul 12 13:13:41 2010
From: blizinski at google.com (Maciej (Matchek) Blizinski)
Date: Mon, 12 Jul 2010 12:13:41 +0100
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
Message-ID: <AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>

No dia 12 de Julho de 2010 11:52, Guillaume Jaquet
<guillaume.jaquet at gmail.com> escreveu:
> We utlise PKG-GET and we're happy, we would like to know how the PKG-GET is
> to find all the dependency of a package?

I'm not sure if you can do that with pkg-get.  There's also pkgutil,
which also downloads and installs packages, but has additional
functionality.  You could use the --nomod option.  It'll tell you
which packages pkgutil would download.  That would be a partial list
of dependencies -- this would only list the dependencies that aren't
already installed.

There's also the --stream option that can build a package stream (that
is, a .pkg file) which contains your designated package together with
all its dependencies.  You could use this function to build the .pkg
file and then examine its contents.

Maciej

From skayser at opencsw.org  Mon Jul 12 13:19:44 2010
From: skayser at opencsw.org (Sebastian Kayser)
Date: Mon, 12 Jul 2010 13:19:44 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
Message-ID: <20100712111944.GA21671@sebastiankayser.de>

* Maciej (Matchek) Blizinski <blizinski at google.com> wrote:
> No dia 12 de Julho de 2010 11:52, Guillaume Jaquet
> <guillaume.jaquet at gmail.com> escreveu:
> > We utlise PKG-GET and we're happy, we would like to know how the PKG-GET is
> > to find all the dependency of a package?
> 
> I'm not sure if you can do that with pkg-get.  There's also pkgutil,
> which also downloads and installs packages, but has additional
> functionality.  You could use the --nomod option.  It'll tell you
> which packages pkgutil would download.  That would be a partial list
> of dependencies -- this would only list the dependencies that aren't
> already installed.
> 
> There's also the --stream option that can build a package stream (that
> is, a .pkg file) which contains your designated package together with
> all its dependencies.  You could use this function to build the .pkg
> file and then examine its contents.

One could use the download mode (-d) to determine the full list of
package + dependencies.

  pkgutil -nd <pkg> 2>&1 | grep CSW

Already installed packages don't make a difference. Just make sure to
install the most recent pkgutil version.

Sebastian

From guillaume.jaquet at gmail.com  Mon Jul 12 14:06:57 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Mon, 12 Jul 2010 14:06:57 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <20100712111944.GA21671@sebastiankayser.de>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
	<20100712111944.GA21671@sebastiankayser.de>
Message-ID: <AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com>

We want to create a machine with packages OPENCSW and then duplicate the
same machine locally, can be used locally OPENCSW if you download all the
packages?

2010/7/12 Sebastian Kayser <skayser at opencsw.org>

> * Maciej (Matchek) Blizinski <blizinski at google.com> wrote:
> > No dia 12 de Julho de 2010 11:52, Guillaume Jaquet
> > <guillaume.jaquet at gmail.com> escreveu:
> > > We utlise PKG-GET and we're happy, we would like to know how the
> PKG-GET is
> > > to find all the dependency of a package?
> >
> > I'm not sure if you can do that with pkg-get.  There's also pkgutil,
> > which also downloads and installs packages, but has additional
> > functionality.  You could use the --nomod option.  It'll tell you
> > which packages pkgutil would download.  That would be a partial list
> > of dependencies -- this would only list the dependencies that aren't
> > already installed.
> >
> > There's also the --stream option that can build a package stream (that
> > is, a .pkg file) which contains your designated package together with
> > all its dependencies.  You could use this function to build the .pkg
> > file and then examine its contents.
>
> One could use the download mode (-d) to determine the full list of
> package + dependencies.
>
>  pkgutil -nd <pkg> 2>&1 | grep CSW
>
> Already installed packages don't make a difference. Just make sure to
> install the most recent pkgutil version.
>
> Sebastian
> _______________________________________________
> users mailing list
> users at lists.opencsw.org
> https://lists.opencsw.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100712/866a0e7c/attachment.html>

From guillaume.jaquet at gmail.com  Mon Jul 12 14:07:09 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Mon, 12 Jul 2010 14:07:09 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
Message-ID: <AANLkTilolYRhVimKjWpDfemBt4mXGZeJQsxCt1dy9VLl@mail.gmail.com>

We want to create a machine with packages OPENCSW and then duplicate the
same machine locally, can be used locally OPENCSW if you download all the
packages?

2010/7/12 Maciej (Matchek) Blizinski <blizinski at google.com>

> No dia 12 de Julho de 2010 11:52, Guillaume Jaquet
> <guillaume.jaquet at gmail.com> escreveu:
> > We utlise PKG-GET and we're happy, we would like to know how the PKG-GET
> is
> > to find all the dependency of a package?
>
> I'm not sure if you can do that with pkg-get.  There's also pkgutil,
> which also downloads and installs packages, but has additional
> functionality.  You could use the --nomod option.  It'll tell you
> which packages pkgutil would download.  That would be a partial list
> of dependencies -- this would only list the dependencies that aren't
> already installed.
>
> There's also the --stream option that can build a package stream (that
> is, a .pkg file) which contains your designated package together with
> all its dependencies.  You could use this function to build the .pkg
> file and then examine its contents.
>
> Maciej
> _______________________________________________
> users mailing list
> users at lists.opencsw.org
> https://lists.opencsw.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100712/797f557b/attachment-0001.html>

From maciej at opencsw.org  Mon Jul 12 14:14:18 2010
From: maciej at opencsw.org (Maciej (Matchek) Blizinski)
Date: Mon, 12 Jul 2010 13:14:18 +0100
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com> 
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com> 
	<20100712111944.GA21671@sebastiankayser.de>
	<AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com>
Message-ID: <AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com>

No dia 12 de Julho de 2010 13:06, Guillaume Jaquet
<guillaume.jaquet at gmail.com> escreveu:
> We want to create a machine with packages OPENCSW and then duplicate the
> same machine locally, can be used locally OPENCSW if you download all the
> packages?

What you describe looks like a use case for the --stream option.  This
creates a .pkg file with all the OpenCSW packages you need, which you
can then install off-line by just using pkgadd.  For example:

pkgutil -s --target=sparc:5.10 -o cswstuff.sparc.5.10.pkg \
  bash_completion elinks findutils gawk ggrep gsed gtar gzip less \
  mc ncftp netcat pstree readline rsync screen coreutils sudo tree \
  unarj unrar unzip vim w3m wget zsh pkgutil puppet

After copying this to a sparc machine:

pkgadd -d cswstuff.sparc.5.10.pkg

Maciej

From schwindt at dfki.uni-kl.de  Mon Jul 12 15:49:23 2010
From: schwindt at dfki.uni-kl.de (Nicolai Schwindt)
Date: Mon, 12 Jul 2010 15:49:23 +0200
Subject: [csw-users] Munin 1.4 in testing
In-Reply-To: Your message of "Sat, 28 Nov 2009 21:47:14 +0100."
	<op.u34hc0ogjbmpvo@imac.lan> 
Message-ID: <201007121349.o6CDnNA4023222@dfki.uni-kl.de>

> Hi all,
> 
> I put munin packages for the new version 1.4 into testing.
> 
> Because munin master and munin node now have some files in common, I  
> created an additional package CSWmunincommon. The packages are now:
> 
> CSWmunincommon
> CSWmuninmaster (depends on CSWmunincommon)
> CSWmuninnode (depends on CSWmunincommon)
> 
> Feedback is welcome.
>

take a look at /var/opt/csw/munin/www/.htaccess 

it is not wrong, but maybe something like :

 AuthUserFile /etc/opt/csw/munin/munin-htpasswd

would look nicer.

This aside everything looks good right now.
I exchanged my master and two nodes so far.

Nicolai



From james at opencsw.org  Mon Jul 12 17:05:55 2010
From: james at opencsw.org (James Lee)
Date: Mon, 12 Jul 2010 15:05:55 GMT
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
Message-ID: <20100712.15055500.2612694385@gyor.oxdrove.co.uk>

On 12/07/10, 11:52:37, Guillaume Jaquet wrote
regarding [csw-users] welcome questions to pkg-get:

> We utlise PKG-GET and we're happy, we would like to know how the PKG-GET
> is to find all the dependency of a package?

If by all you mean recursive not just first level you can use a hidden
option on my site, eg:

www.canoedissent.org.uk/packages/unstable/sparc/5.10/CSWgs/requires/
www.canoedissent.org.uk/packages/unstable/sparc/5.10/CSWgs/supports/


Add the suffix "requires/" or "supports/" to the package info URL.

It's hidden because for some packages the list is long and it gave the
machine a headache, seems better now but now uses a faster machine than
when I wrote the routine.



James.

From ja at opencsw.org  Mon Jul 12 23:03:42 2010
From: ja at opencsw.org (Juergen Arndt)
Date: Mon, 12 Jul 2010 23:03:42 +0200
Subject: [csw-users] Munin 1.4 in testing
In-Reply-To: <201007121349.o6CDnNA4023222@dfki.uni-kl.de>
References: <201007121349.o6CDnNA4023222@dfki.uni-kl.de>
Message-ID: <FA2E25FC-97E0-417C-AA4E-360777DFB121@opencsw.org>


On 12.07.2010, at 15:49, Nicolai Schwindt wrote:

>> Hi all,
>> 
>> I put munin packages for the new version 1.4 into testing.
>> 
>> Because munin master and munin node now have some files in common, I  
>> created an additional package CSWmunincommon. The packages are now:
>> 
>> CSWmunincommon
>> CSWmuninmaster (depends on CSWmunincommon)
>> CSWmuninnode (depends on CSWmunincommon)
>> 
>> Feedback is welcome.
>> 
> 
> take a look at /var/opt/csw/munin/www/.htaccess 
> 
> it is not wrong, but maybe something like :
> 
> AuthUserFile /etc/opt/csw/munin/munin-htpasswd
> 
> would look nicer.


Thanks for the hint, I wasn't aware of that file at all. 
I fixed the entries and the file is now handled also by the cswclassutils, so that the contents of it will be preserved in case of an upgrade.

Juergen

-- 
Juergen Arndt


From guillaume.jaquet at gmail.com  Tue Jul 13 12:12:50 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Tue, 13 Jul 2010 12:12:50 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
	<20100712111944.GA21671@sebastiankayser.de>
	<AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com>
	<AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com>
Message-ID: <AANLkTinRvo06_qKhJJHgl-tlGJZv9WdB7ibEiDPteI_V@mail.gmail.com>

Thank you for your reply.

Good day

2010/7/12 Maciej (Matchek) Blizinski <maciej at opencsw.org>

> No dia 12 de Julho de 2010 13:06, Guillaume Jaquet
> <guillaume.jaquet at gmail.com> escreveu:
> > We want to create a machine with packages OPENCSW and then duplicate the
> > same machine locally, can be used locally OPENCSW if you download all the
> > packages?
>
> What you describe looks like a use case for the --stream option.  This
> creates a .pkg file with all the OpenCSW packages you need, which you
> can then install off-line by just using pkgadd.  For example:
>
> pkgutil -s --target=sparc:5.10 -o cswstuff.sparc.5.10.pkg \
>  bash_completion elinks findutils gawk ggrep gsed gtar gzip less \
>  mc ncftp netcat pstree readline rsync screen coreutils sudo tree \
>  unarj unrar unzip vim w3m wget zsh pkgutil puppet
>
> After copying this to a sparc machine:
>
> pkgadd -d cswstuff.sparc.5.10.pkg
>
> Maciej
> _______________________________________________
> users mailing list
> users at lists.opencsw.org
> https://lists.opencsw.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100713/46f22af3/attachment.html>

From guillaume.jaquet at gmail.com  Tue Jul 13 12:12:14 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Tue, 13 Jul 2010 12:12:14 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <20100712.15055500.2612694385@gyor.oxdrove.co.uk>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<20100712.15055500.2612694385@gyor.oxdrove.co.uk>
Message-ID: <AANLkTinI_ScVcGVHLO_FzFWyqw9bq0f5SXM7BeimBDlZ@mail.gmail.com>

Thank you for your reply.

Good day

2010/7/12 James Lee <james at opencsw.org>

> On 12/07/10, 11:52:37, Guillaume Jaquet wrote
> regarding [csw-users] welcome questions to pkg-get:
>
> > We utlise PKG-GET and we're happy, we would like to know how the PKG-GET
> > is to find all the dependency of a package?
>
> If by all you mean recursive not just first level you can use a hidden
> option on my site, eg:
>
> www.canoedissent.org.uk/packages/unstable/sparc/5.10/CSWgs/requires/
> www.canoedissent.org.uk/packages/unstable/sparc/5.10/CSWgs/supports/
>
>
> Add the suffix "requires/" or "supports/" to the package info URL.
>
> It's hidden because for some packages the list is long and it gave the
> machine a headache, seems better now but now uses a faster machine than
> when I wrote the routine.
>
>
>
> James.
> _______________________________________________
> users mailing list
> users at lists.opencsw.org
> https://lists.opencsw.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100713/0af19bba/attachment.html>

From guillaume.jaquet at gmail.com  Tue Jul 13 12:12:32 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Tue, 13 Jul 2010 12:12:32 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
Message-ID: <AANLkTimQtS8VipqIv2U4ResN0lyXk3JLkuB7DGnmX8gB@mail.gmail.com>

Thank you for your reply.

Good day

2010/7/12 Maciej (Matchek) Blizinski <blizinski at google.com>

> No dia 12 de Julho de 2010 11:52, Guillaume Jaquet
> <guillaume.jaquet at gmail.com> escreveu:
> > We utlise PKG-GET and we're happy, we would like to know how the PKG-GET
> is
> > to find all the dependency of a package?
>
> I'm not sure if you can do that with pkg-get.  There's also pkgutil,
> which also downloads and installs packages, but has additional
> functionality.  You could use the --nomod option.  It'll tell you
> which packages pkgutil would download.  That would be a partial list
> of dependencies -- this would only list the dependencies that aren't
> already installed.
>
> There's also the --stream option that can build a package stream (that
> is, a .pkg file) which contains your designated package together with
> all its dependencies.  You could use this function to build the .pkg
> file and then examine its contents.
>
> Maciej
> _______________________________________________
> users mailing list
> users at lists.opencsw.org
> https://lists.opencsw.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100713/c853e4b2/attachment-0001.html>

From guillaume.jaquet at gmail.com  Mon Jul 19 15:19:59 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Mon, 19 Jul 2010 15:19:59 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
	<20100712111944.GA21671@sebastiankayser.de>
	<AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com>
	<AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com>
Message-ID: <AANLkTil97WDrek1QDqiiqnL-rJdJFm--XuDRHVRljj7T@mail.gmail.com>

Re

that is what I do, regoruper all the packages that I need to make local
installs with script automation.

Have you ever done this?

thank you

2010/7/12 Maciej (Matchek) Blizinski <maciej at opencsw.org>

> No dia 12 de Julho de 2010 13:06, Guillaume Jaquet
> <guillaume.jaquet at gmail.com> escreveu:
> > We want to create a machine with packages OPENCSW and then duplicate the
> > same machine locally, can be used locally OPENCSW if you download all the
> > packages?
>
> What you describe looks like a use case for the --stream option.  This
> creates a .pkg file with all the OpenCSW packages you need, which you
> can then install off-line by just using pkgadd.  For example:
>
> pkgutil -s --target=sparc:5.10 -o cswstuff.sparc.5.10.pkg \
>  bash_completion elinks findutils gawk ggrep gsed gtar gzip less \
>  mc ncftp netcat pstree readline rsync screen coreutils sudo tree \
>  unarj unrar unzip vim w3m wget zsh pkgutil puppet
>
> After copying this to a sparc machine:
>
> pkgadd -d cswstuff.sparc.5.10.pkg
>
> Maciej
> _______________________________________________
> users mailing list
> users at lists.opencsw.org
> https://lists.opencsw.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100719/fafc586f/attachment.html>

From maciej at opencsw.org  Mon Jul 19 15:29:56 2010
From: maciej at opencsw.org (Maciej (Matchek) Blizinski)
Date: Mon, 19 Jul 2010 14:29:56 +0100
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTil97WDrek1QDqiiqnL-rJdJFm--XuDRHVRljj7T@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com> 
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com> 
	<20100712111944.GA21671@sebastiankayser.de>
	<AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com> 
	<AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com> 
	<AANLkTil97WDrek1QDqiiqnL-rJdJFm--XuDRHVRljj7T@mail.gmail.com>
Message-ID: <AANLkTi=wQGJYeKm5JR9ARb6cdJLhuatjkhCphUdffTcz@mail.gmail.com>

No dia 19 de Julho de 2010 14:19, Guillaume Jaquet
<guillaume.jaquet at gmail.com> escreveu:
> Re
>
> that is what I do, regoruper all the packages that I need to make local
> installs with script automation.
>
> Have you ever done this?

Hi Guillaume, yes, I've done this a couple times about two years ago,
it worked very well.

From guillaume.jaquet at gmail.com  Mon Jul 19 15:58:11 2010
From: guillaume.jaquet at gmail.com (Guillaume Jaquet)
Date: Mon, 19 Jul 2010 15:58:11 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTi=wQGJYeKm5JR9ARb6cdJLhuatjkhCphUdffTcz@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com>
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com>
	<20100712111944.GA21671@sebastiankayser.de>
	<AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com>
	<AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com>
	<AANLkTil97WDrek1QDqiiqnL-rJdJFm--XuDRHVRljj7T@mail.gmail.com>
	<AANLkTi=wQGJYeKm5JR9ARb6cdJLhuatjkhCphUdffTcz@mail.gmail.com>
Message-ID: <AANLkTik1c9uvzB1o2QpoPZ7v9soh180ooYQAyCu7plto@mail.gmail.com>

you have a command with pkgutil synthase advise me? please

I'm sorry, I'm a novice


2010/7/19 Maciej (Matchek) Blizinski <maciej at opencsw.org>

> No dia 19 de Julho de 2010 14:19, Guillaume Jaquet
> <guillaume.jaquet at gmail.com> escreveu:
> > Re
> >
> > that is what I do, regoruper all the packages that I need to make local
> > installs with script automation.
> >
> > Have you ever done this?
>
> Hi Guillaume, yes, I've done this a couple times about two years ago,
> it worked very well.
> _______________________________________________
> users mailing list
> users at lists.opencsw.org
> https://lists.opencsw.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100719/0d3fa372/attachment.html>

From maciej at opencsw.org  Mon Jul 19 16:02:35 2010
From: maciej at opencsw.org (Maciej (Matchek) Blizinski)
Date: Mon, 19 Jul 2010 15:02:35 +0100
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTik1c9uvzB1o2QpoPZ7v9soh180ooYQAyCu7plto@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com> 
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com> 
	<20100712111944.GA21671@sebastiankayser.de>
	<AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com> 
	<AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com> 
	<AANLkTil97WDrek1QDqiiqnL-rJdJFm--XuDRHVRljj7T@mail.gmail.com> 
	<AANLkTi=wQGJYeKm5JR9ARb6cdJLhuatjkhCphUdffTcz@mail.gmail.com> 
	<AANLkTik1c9uvzB1o2QpoPZ7v9soh180ooYQAyCu7plto@mail.gmail.com>
Message-ID: <AANLkTimerjxHeGhJNirBB=GUCz0Zviw5_P+R3q8AD9V8@mail.gmail.com>

No dia 19 de Julho de 2010 14:58, Guillaume Jaquet
<guillaume.jaquet at gmail.com> escreveu:
> you have a command with pkgutil synthase advise me? please

Have you tried a command like the one below?

pkgutil -s --target=sparc:5.10 -o cswstuff.sparc.5.10.pkg \
 bash_completion elinks findutils gawk ggrep gsed gtar gzip less \
 mc ncftp netcat pstree readline rsync screen coreutils sudo tree \
 unarj unrar unzip vim w3m wget zsh pkgutil puppet

Maciej

From hering.cheng at computer.org  Mon Jul 19 16:09:21 2010
From: hering.cheng at computer.org (Hering Cheng)
Date: Mon, 19 Jul 2010 07:09:21 -0700
Subject: [csw-users] Installing pkg-get as Non-Root User
Message-ID: <AANLkTinIJYKV_V31l_fy2cbyKDo5g_n9FjzbjEa0UaT2@mail.gmail.com>

Hi,

Can someone provide instructions on how to install pkg-get as a non-root
user in my own directory?  I know that it can be downloaded from
http://www.opencsw.org/pkg-get.  After unpacking it using "pkgtrans pkg-get
/tmp", I do not see the actual executable under /tmp/CSWpkgget/root.

Thanks.
Hering Cheng
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20100719/0cdf9182/attachment.html>

From bonivart at opencsw.org  Mon Jul 19 18:05:07 2010
From: bonivart at opencsw.org (Peter Bonivart)
Date: Mon, 19 Jul 2010 18:05:07 +0200
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTimerjxHeGhJNirBB=GUCz0Zviw5_P+R3q8AD9V8@mail.gmail.com>
References: <AANLkTinqV2rBzBrrbXKpz3TxyP8XbeEU40oSXoa-A9rn@mail.gmail.com> 
	<AANLkTinRTsC0QQ3ikX_Joeq91jDVg8hEp3ZPJuk4u3qe@mail.gmail.com> 
	<20100712111944.GA21671@sebastiankayser.de>
	<AANLkTily2QP2SYrSPSCLx8BiLmZJ0bt4hLywfd8SmjtG@mail.gmail.com> 
	<AANLkTileNxMQotqLGtFyaFJ68759c1WvDWqytfPsi3pJ@mail.gmail.com> 
	<AANLkTil97WDrek1QDqiiqnL-rJdJFm--XuDRHVRljj7T@mail.gmail.com> 
	<AANLkTi=wQGJYeKm5JR9ARb6cdJLhuatjkhCphUdffTcz@mail.gmail.com> 
	<AANLkTik1c9uvzB1o2QpoPZ7v9soh180ooYQAyCu7plto@mail.gmail.com> 
	<AANLkTimerjxHeGhJNirBB=GUCz0Zviw5_P+R3q8AD9V8@mail.gmail.com>
Message-ID: <AANLkTinRJp3B6Vjcjm1wLDJ2TruFzXYyM4xTJ3-3dntc@mail.gmail.com>

On Mon, Jul 19, 2010 at 4:02 PM, Maciej (Matchek) Blizinski
<maciej at opencsw.org> wrote:
> No dia 19 de Julho de 2010 14:58, Guillaume Jaquet
> <guillaume.jaquet at gmail.com> escreveu:
>> you have a command with pkgutil synthase advise me? please
>
> Have you tried a command like the one below?
>
> pkgutil -s --target=sparc:5.10 -o cswstuff.sparc.5.10.pkg \
> ?bash_completion elinks findutils gawk ggrep gsed gtar gzip less \
> ?mc ncftp netcat pstree readline rsync screen coreutils sudo tree \
> ?unarj unrar unzip vim w3m wget zsh pkgutil puppet

Note that --stream is no longer an option of its own, it's now a
sub-option to --download.

To duplicate a system this may be one way:

pkgutil -ds `pkginfo|grep CSW|awk '{print $2}'`

-- 
/peter

From phil at bolthole.com  Thu Jul 29 21:53:09 2010
From: phil at bolthole.com (Philip Brown)
Date: Thu, 29 Jul 2010 12:53:09 -0700
Subject: [csw-users] welcome questions to pkg-get
In-Reply-To: <AANLkTi=PXmCcPGrfiqNipHcu2dMDeOZjFjNYWpyAD_+c@mail.gmail.com>
References: <AANLkTi=PXmCcPGrfiqNipHcu2dMDeOZjFjNYWpyAD_+c@mail.gmail.com>
Message-ID: <AANLkTimd9yb26BgmcXjnK0k5ZYEFXwYuSZTkgArsLy-4@mail.gmail.com>

> Guillaume wrote:
> We want to create a machine with packages OPENCSW and then duplicate the
> same machine locally, can be used locally OPENCSW if you download all the
> packages?


hi Guillaume,
Sorry for the slow reply; i only read the users' list infrequently.
You are welcome to email me directly with questions about pkg-get.

The one above, can easily be solved by pkg-get's -l option.

pkg-get -l

will give you a list to stdout, of all csw installed package.

You can then do

oldmachine$ pkg-get -l >somefile


newmachine$ pkg-get -i `cat somefile`

(presuming that you have already set up pkg-get on newmachine to know
about some local package repository, at least. Which can be as simple
as manually copying /opt/csw/bin/pkg-get to the new machine, and
running "pkg-get -U")

You can get a "local" copy of all packages easily and efficiently,  by
rsyncing all the packages you want from one of the rsync sites
mentioned on http://www.opencsw.org/get-it/mirrors/

Or, if you only have a relatively small subset of packages, and you
only want a static, non-updating copy, you could do

 pkg-get -i -d `cat somefile`     # the file mentioned in above steps
and then copy /var/pkg-get/catalog-xxxx into the same directory.

erm.. you would then have to make the directory be named
 [something]/`uname -p`/`uname -r`/

and then you could set the [something] as your pkg-get site url.



   ------

Also, relevant to your prior question, if you are curious how many
packages will be pulled in by "pkg-get -i", you can run it in verbose
mode.

It may not be in a convenient format for you, but it may still be useful.
Example:

$ pkg-get -v -i aide
DEBUG-ONLY/VERBOSE MODE: level=1
No existing install of CSWaide found. Installing...
             CSWaide                           aide 115216 bytes
         CSWlibmhash                       libmhash 318179 bytes


If you run this command on a machine with no CSW packages, then it
will naturally show you "all the dependancies of the given package" :)


It does this by parsing the dependency information that is in the catalog file.



If you really wanted to get at the information more directly, and were
okay with doing some coding, you could actually write something to
parse the catalog yourself, which would reside locally for you in
/var/pkg-get/catalog-xxxxx

The catalog format is fairly simple. The files probably you care about are:

normalname f2 CSWpkgname f4 f5 f6 CSWdep1|CSWdep2|CSWdep2

So,the above gives you the first level dependancies of "normalname".
You would then have to recursively parse through the file for CSWdep1,
CSWdep2, and so on.