[csw-users] Can't find CSWunrealircd

[Eric Miller]

On Fri, May 13, 2011 at 2:23 PM, Axelle Apvrille
<axelle_apvrille at yahoo.fr>wrote:

> If anybody has had any successful experience building an IRC server on
>> Solaris, I'd love to hear about it. It is certainly feasible, I am sure.
>
>
Hi Axelle,

You might try Hyperion (
http://www.stack.nl/~jilles/irc/hyperion-1.0.2.tar.gz) which is what
Freenode uses.  I had some success but many of the configuration options are
hardcoded.  I applied the following "sed patch" and installed in
prefix=/opt/hyperion and kept all configuration in /srv/hyperion.

  sed -e 's/+ns/+n/' -e 's/ | MODE_SECRET;/;/' src/channel.c >
src/channel.c.$$
  mv src/channel.c.$$ src/channel.c

  sed \
        -e 's,#define DPATH    PREFIX "/",#define DPATH    "/srv/hyperion",'
\
        -e 's,#define SPATH    "sbin/hyperion-ircd",#define SPATH
 "/opt/hyperion/sbin/hyperion-ircd",' \
        -e 's,#define CPATH    "etc/dancer-ircd/ircd.conf",#define CPATH
 "etc/ircd.conf",' \
        -e 's,#define MPATH    "etc/dancer-ircd/motd",#define MPATH
 "etc/motd",' \
        -e 's,#define HPATH    "etc/dancer-ircd/ohelp",#define HPATH
 "etc/ohelp",' \
        -e 's,#define OPATH    "etc/dancer-ircd/omotd",#define OPATH
 "etc/omotd",' \
        -e 's,#define LPATH    "var/log/dancer-ircd/ircd.log",#define LPATH
   "var/log/ircd.log",' \
        -e 's,#define HLBASE   "var/log/dancer-ircd/hash",#define HLBASE
"var/log/hash",' \
        -e 's,#define USERLOG  "var/log/dancer-ircd/user.log",#define
USERLOG  "var/log/user.log",' \
        -e 's,#define OPERLOG  "var/log/dancer-ircd/oper.log",#define
OPERLOG  "var/log/oper.log",' \
        -e 's,#define PPATH    "var/run/dancer-ircd/dancer-ircd.pid",#define
PPATH    "var/run/ircd.pid",' \
        -e 's,#define KPATH    "var/lib/dancer-ircd/kline.conf",#define
KPATH    "var/lib/kline.conf",' \
        -e 's,#define DLPATH   "var/lib/dancer-ircd/dline.conf",#define
DLPATH   "var/lib/dline.conf",' \
        -e 's,#define MXPATH   "var/lib/dancer-ircd/ircd.max",#define MXPATH
  "var/lib/ircd.max",' \
        -e 's,#define DUMPPATH "var/lib/dancer-ircd/dump",#define DUMPPATH
"var/lib/dump",' \
        src/paths.c > src/paths.c.$$
  mv src/paths.c.$$ src/paths.c

  sed \
        -e 's/#define MIN_USERS_FOR_LIST 4/#define MIN_USERS_FOR_LIST 0/' \
        -e 's/#define NO_CHANOPS_ON_SPLIT/#undef NO_CHANOPS_ON_SPLIT/' \
        -e 's/#define CONNECTTIMEOUT  30/#define CONNECTTIMEOUT  0/' \
        -e 's/#define NETWORK_NAME "irc.freenode.net"/#define NETWORK_NAME "
irc.my.org"/' \
        -e 's/#define NETWORK_REALNAME "freenode IRC"/#define
NETWORK_REALNAME "My IRC Network"/' \
        -e 's,#define NETWORK_DESC "http://freenode.net/",#define
NETWORK_DESC "http://my.org/",' \
        include/config.h > include/config.h.$$
  mv include/config.h.$$ include/config.h

  sed \
        -e "s/request->retries = 3;/request->retries = 0;/" \
        -e "s/request->resend = 1;/request->resend = 0;/" \
         src/res.c > src/res.c.$$
  mv src/res.c.$$ src/res.c
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20110513/ded9f295/attachment-0001.html>