Mail & Web: Memory error
Ihsan Dogan
ihsan at opencsw.org
Thu May 19 12:52:25 CEST 2016
On Thursday, 19 May 2016 11:04 +0200, Ihsan Dogan wrote:
> 2016-05-19 08:46:26.577 0:7:3>ERROR: TEST = Queue Block Mem Test
> 2016-05-19 08:46:26.663 0:7:3>H/W under test = MB/CMP0/CH2/R1/D0/S0 (J1801)
> 2016-05-19 08:46:26.763 0:7:3>Repair Instructions: Replace items in order listed by 'H/W under test' above.
> 2016-05-19 08:46:26.907 0:7:3>MSG = Pin 3 failed on MB/CMP0/CH2/R1/D0/S0 (J1801)
> 2016-05-19 08:46:27.014 0:7:3>END_ERROR
>
> ======================= Physical Memory Configuration ========================
> Segment Table:
> --------------------------------------------------------------
> Base Segment Interleave Bank Contains
> Address Size Factor Size Modules
> --------------------------------------------------------------
> 0x0 8 GB 4 2 GB MB/CMP0/CH0/R0/D0
> MB/CMP0/CH0/R0/D1
> 2 GB MB/CMP0/CH1/R0/D0
> MB/CMP0/CH1/R0/D1
> 2 GB MB/CMP0/CH2/R0/D0
> MB/CMP0/CH2/R0/D1
> 2 GB MB/CMP0/CH3/R0/D0
> MB/CMP0/CH3/R0/D1
>
Here is the full "prtdiag -v" output:
http://pastebin.com/a8D2RSFP
As I understand the output right, the system has 16x 1GB DIMMs.
According to Oracle's System Handbook [1], this would be part
number 370-6208.
[1]
https://support.oracle.com/handbook_private/Devices/Memory/MEM_SunFireT2000.html
-Ihsan
--
ihsan at dogan.ch http://blog.dogan.ch/
More information about the maintainers
mailing list