[csw-users] is CSWdhcpd fully functionnal?

[ghenry]

hello all,
i just upgrade from release 3 to 4, and i'm not sure that everything is ok.
With release 3, a snoop shows:
t2000-root% snoop port 67
Using device /dev/e1000g0 (promiscuous mode)
192.168.1.84 -> t2000        DHCP/BOOTP DHCPREQUEST
        t2000 -> 192.168.1.84 DHCP/BOOTP DHCPACK
OLD-BROADCAST -> BROADCAST    DHCP/BOOTP DHCPDISCOVER
nagios.moi.fr -> BROADCAST    DHCP/BOOTP DHCPDISCOVER
        t2000 -> BROADCAST    DHCP/BOOTP DHCPOFFER
OLD-BROADCAST -> BROADCAST    DHCP/BOOTP DHCPDISCOVER
        t2000 -> BROADCAST    DHCP/BOOTP DHCPOFFER
OLD-BROADCAST -> BROADCAST    DHCP/BOOTP DHCPREQUEST
        t2000 -> BROADCAST    DHCP/BOOTP DHCPACK
192.168.1.242 -> BROADCAST    DHCP/BOOTP DHCPINFORM
        t2000 -> 192.168.1.242 DHCP/BOOTP DHCPACK
192.168.1.242 -> BROADCAST    DHCP/BOOTP DHCPINFORM

but with release 4:
fury-root% snoop port 67
Using device /dev/e1000g0 (promiscuous mode)
OLD-BROADCAST -> BROADCAST    DHCP/BOOTP DHCPDISCOVER
OLD-BROADCAST -> BROADCAST    DHCP/BOOTP DHCPDISCOVER
nagios.moi.fr -> BROADCAST    DHCP/BOOTP DHCPDISCOVER
OLD-BROADCAST -> BROADCAST    DHCP/BOOTP DHCPDISCOVER
OLD-BROADCAST -> BROADCAST    DHCP/BOOTP DHCPDISCOVER


i ran dhcpd in debug mode, and i never see the client appearing in the logs.

Is it possible to stay at release 3, but with SMF enabled?

thanks in advance,

gerard