Configuring acpsupsd for CP1500EPFCLCD

[Laurent Blume]

Hello,

Have you tried with an empty DEVICE value? That should be the default 
for USB.

Laurent

Le 2014/07/06 19:57 +0200, Jean-pierre Gervasoni a écrit:
> Dear members,
>
> I have set up a OmniOS box on a HP n54l. I have one issue left for now -
> configuring acpupsd to drive a CyberPower CP1500EPFCLCD unit. Here is a
> recap of what I did:
>
> - Remove HID, replace by UGEN using following link:
>
> http://www.packetmischief.ca/2013/01/01/installing-apcupsd-with-usb-support-on-omnios/
>
> - Install pkgutil from http://www.opencsw.org/
>
> - Install CSWapcupsd from http://www.opencsw.org/
>
> - Configured /etc/opt/csw/apcsupsd/apcsupsd.conf to make it work with
> USB (I have attached the file)
>
> - Running apctest failed with a cryptic error message:
>
> 2014-07-06 19:32:36 apctest 3.14.10 (13 September 2011) sun
> Checking configuration ...
> Attached to driver: usb
> sharenet.type = Network & ShareUPS Disabled
> cable.type = USB Cable
> mode.type = USB UPS Driver
> Setting up the port ...
> apctest FATAL ERROR in generic-usb.c at line 674
> Cannot find UPS device --
> For a link to detailed USB trouble shooting information,
> please see <http://www.apcupsd.com/support.html>.
> apctest error termination completed
>
> - I am attaching apcupsd.trace file
>
> - Here's a copy of log file when i unplug/plug the usb cable:
>
> Jul  6 19:01:02 OmniOS genunix: [ID 408114kern.info  <http://kern.info>] /pci at 0,0/pci103c,1609 at 12/input at 5 (ugen0) removed
> Jul  6 19:01:42 OmniOS usba: [ID 912658kern.info  <http://kern.info>] USB 2.0 device (usb764,501) operating at full speed (USB 1.x) on USB 1.10 root hub: input at 5, ugen0 at bus address 2
> Jul  6 19:01:42 OmniOS usba: [ID 349649kern.info  <http://kern.info>] 	CP1500EPFCLCD RJB103.551 CPS
> Jul  6 19:01:42 OmniOS genunix: [ID 936769kern.info  <http://kern.info>] ugen0 is /pci at 0,0/pci103c,1609 at 12/input at 5
> Jul  6 19:01:42 OmniOS genunix: [ID 408114kern.info  <http://kern.info>] /pci at 0,0/pci103c,1609 at 12/input at 5 (ugen0) online
>
>
> - I'm kind of lost for now.....
>
> Thank you for any help you could provide,
>
> Jean-Pierre