Configuring acpsupsd for CP1500EPFCLCD

[Jean-Pierre Gervasoni]

Dear Laurent,

Yes i first tried to use an empty value for device flag with no luck. I am
wondering wether this may be related to the fact that i do not see
/dev/ugen0 entry....

Best regards,

Jean-Pierre
Le 7 juil. 2014 13:35, "Laurent Blume" <laurent at opencsw.org> a écrit :

> Hello,
>
> Have you tried with an empty DEVICE value? That should be the default for
> USB.
>
> Laurent
>
> Le 2014/07/06 19:57 +0200, Jean-pierre Gervasoni a écrit:
>
>> Dear members,
>>
>> I have set up a OmniOS box on a HP n54l. I have one issue left for now -
>> configuring acpupsd to drive a CyberPower CP1500EPFCLCD unit. Here is a
>> recap of what I did:
>>
>> - Remove HID, replace by UGEN using following link:
>>
>> http://www.packetmischief.ca/2013/01/01/installing-apcupsd-
>> with-usb-support-on-omnios/
>>
>> - Install pkgutil from http://www.opencsw.org/
>>
>> - Install CSWapcupsd from http://www.opencsw.org/
>>
>> - Configured /etc/opt/csw/apcsupsd/apcsupsd.conf to make it work with
>> USB (I have attached the file)
>>
>> - Running apctest failed with a cryptic error message:
>>
>> 2014-07-06 19:32:36 apctest 3.14.10 (13 September 2011) sun
>> Checking configuration ...
>> Attached to driver: usb
>> sharenet.type = Network & ShareUPS Disabled
>> cable.type = USB Cable
>> mode.type = USB UPS Driver
>> Setting up the port ...
>> apctest FATAL ERROR in generic-usb.c at line 674
>> Cannot find UPS device --
>> For a link to detailed USB trouble shooting information,
>> please see <http://www.apcupsd.com/support.html>.
>> apctest error termination completed
>>
>> - I am attaching apcupsd.trace file
>>
>> - Here's a copy of log file when i unplug/plug the usb cable:
>>
>> Jul  6 19:01:02 OmniOS genunix: [ID 408114kern.info  <http://kern.info>]
>> /pci at 0,0/pci103c,1609 at 12/input at 5 (ugen0) removed
>> Jul  6 19:01:42 OmniOS usba: [ID 912658kern.info  <http://kern.info>]
>> USB 2.0 device (usb764,501) operating at full speed (USB 1.x) on USB 1.10
>> root hub: input at 5, ugen0 at bus address 2
>> Jul  6 19:01:42 OmniOS usba: [ID 349649kern.info  <http://kern.info>]
>> CP1500EPFCLCD RJB103.551 CPS
>> Jul  6 19:01:42 OmniOS genunix: [ID 936769kern.info  <http://kern.info>]
>> ugen0 is /pci at 0,0/pci103c,1609 at 12/input at 5
>> Jul  6 19:01:42 OmniOS genunix: [ID 408114kern.info  <http://kern.info>]
>> /pci at 0,0/pci103c,1609 at 12/input at 5 (ugen0) online
>>
>>
>> - I'm kind of lost for now.....
>>
>> Thank you for any help you could provide,
>>
>> Jean-Pierre
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opencsw.org/pipermail/users/attachments/20140707/e5abfd32/attachment.html>