Configuring acpsupsd for CP1500EPFCLCD

[Laurent Blume]

Are you sure that specific UPS is supported by apcupsd? Can you try it 
using a Linux distro?

There's no ugen in /dev, apcupsd uses libusb to communicate, which does 
not need devices.

Laurent

Le 2014/07/07 13:56 +0200, Jean-pierre Gervasoni a écrit:
> Dear Laurent,
>
> Yes i first tried to use an empty value for device flag with no luck. I
> am wondering wether this may be related to the fact that i do not see
> /dev/ugen0 entry....
>
> Best regards,
>
> Jean-Pierre
>
> Le 7 juil. 2014 13:35, "Laurent Blume" <laurent at opencsw.org
> <mailto:laurent at opencsw.org>> a écrit :
>
>     Hello,
>
>     Have you tried with an empty DEVICE value? That should be the
>     default for USB.
>
>     Laurent
>
>     Le 2014/07/06 19:57 +0200, Jean-pierre Gervasoni a écrit:
>
>         Dear members,
>
>         I have set up a OmniOS box on a HP n54l. I have one issue left
>         for now -
>         configuring acpupsd to drive a CyberPower CP1500EPFCLCD unit.
>         Here is a
>         recap of what I did:
>
>         - Remove HID, replace by UGEN using following link:
>
>         http://www.packetmischief.ca/__2013/01/01/installing-apcupsd-__with-usb-support-on-omnios/
>         <http://www.packetmischief.ca/2013/01/01/installing-apcupsd-with-usb-support-on-omnios/>
>
>         - Install pkgutil from http://www.opencsw.org/
>
>         - Install CSWapcupsd from http://www.opencsw.org/
>
>         - Configured /etc/opt/csw/apcsupsd/__apcsupsd.conf to make it
>         work with
>         USB (I have attached the file)
>
>         - Running apctest failed with a cryptic error message:
>
>         2014-07-06 19:32:36 apctest 3.14.10 (13 September 2011) sun
>         Checking configuration ...
>         Attached to driver: usb
>         sharenet.type = Network & ShareUPS Disabled
>         cable.type = USB Cable
>         mode.type = USB UPS Driver
>         Setting up the port ...
>         apctest FATAL ERROR in generic-usb.c at line 674
>         Cannot find UPS device --
>         For a link to detailed USB trouble shooting information,
>         please see <http://www.apcupsd.com/__support.html
>         <http://www.apcupsd.com/support.html>>.
>         apctest error termination completed
>
>         - I am attaching apcupsd.trace file
>
>         - Here's a copy of log file when i unplug/plug the usb cable:
>
>         Jul  6 19:01:02 OmniOS genunix: [ID 408114kern.info
>         <http://408114kern.info>  <http://kern.info>]
>         /pci at 0,0/pci103c,1609 at 12/__input at 5 (ugen0) removed
>         Jul  6 19:01:42 OmniOS usba: [ID 912658kern.info
>         <http://912658kern.info>  <http://kern.info>] USB 2.0 device
>         (usb764,501) operating at full speed (USB 1.x) on USB 1.10 root
>         hub: input at 5, ugen0 at bus address 2
>         Jul  6 19:01:42 OmniOS usba: [ID 349649kern.info
>         <http://349649kern.info>  <http://kern.info>]   CP1500EPFCLCD
>         RJB103.551 CPS
>         Jul  6 19:01:42 OmniOS genunix: [ID 936769kern.info
>         <http://936769kern.info>  <http://kern.info>] ugen0 is
>         /pci at 0,0/pci103c,1609 at 12/__input at 5
>         Jul  6 19:01:42 OmniOS genunix: [ID 408114kern.info
>         <http://408114kern.info>  <http://kern.info>]
>         /pci at 0,0/pci103c,1609 at 12/__input at 5 (ugen0) online
>
>
>         - I'm kind of lost for now.....
>
>         Thank you for any help you could provide,
>
>         Jean-Pierre
>
>
>